The DOI matches its Crossref record; 59 of the 59 references it cites were found in a registry or an index.
Challenges for Rechargeable Li Batteries
Abstract
The challenges for further development of Li rechargeable batteries for electric vehicles are reviewed. Most important is safety, which requires development of a nonflammable electrolyte with either a larger window between its lowest unoccupied molecular orbital (LUMO) and highest occupied molecular orbital (HOMO) or a constituent (or additive) that can develop rapidly a solid/electrolyte-interface (SEI) layer to prevent plating of Li on a carbon anode during a fast charge of the battery. A high Li + -ion conductivity (σ Li > 10 −4 S/cm) in the electrolyte and across the electrode/electrolyte interface is needed for a power battery. Important also is an increase in the density of the stored energy, which is the product of the voltage and capacity of reversible Li insertion/extraction into/from the electrodes. It will be difficult to design a better anode than carbon, but carbon requires formation of an SEI layer, which involves an irreversible capacity loss. The design of a cathode composed of environmentally benign, low-cost materials that has its electrochemical potential μ C well-matched to the HOMO of the electrolyte and allows access to two Li atoms per transition-metal cation would increase the energy density, but it is a daunting challenge. Two redox couples can be accessed where the cation redox couples are “pinned” at the top of the O 2p bands, but to take advantage of this possibility, it must be realized in a framework structure that can accept more than one Li atom per transition-metal cation. Moreover, such a situation represents an intrinsic voltage limit of the cathode, and matching this limit to the HOMO of the electrolyte requires the ability to tune the intrinsic voltage limit. Finally, the chemical compatibility in the battery must allow a long service life.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nanostructured materials for advanced energy conversion and storage devices
Aricò, A. S., Bruce, P., Scrosati, B., Tarascon, J.-M., & van Schalkwijk, W. (2005) · Nature Materials · doi:10.1038/nmat1368 · Cited by 8,826
Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries
Padhi, A. K., Nanjundaswamy, K. S., & Goodenough, J. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837571 · Cited by 7,933
Self-citationNonaqueous Liquid Electrolytes for Lithium-Based Rechargeable Batteries
Xu, K. (2004) · Chemical Reviews · doi:10.1021/cr030203g · Cited by 7,437
High-performance lithium battery anodes using silicon nanowires
Chan, C. K., Peng, H., Liu, G., McIlwrath, K., Zhang, X. F., Huggins, R. A., & Cui, Y. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2007.411 · Cited by 6,683
Nanomaterials for Rechargeable Lithium Batteries
Bruce, P. G., Scrosati, B., & Tarascon, J. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200702505 · Cited by 5,886
LixCoO2 (0<x<-1): A new cathode material for batteries of high energy density
Mizushima, K., Jones, P. C., Wiseman, P. J., & Goodenough, J. B. (1980) · Materials Research Bulletin · doi:10.1016/0025-5408(80)90012-4 · Cited by 3,856
Self-citationNanocomposite polymer electrolytes for lithium batteries
Croce, F., Appetecchi, G. B., Persi, L., & Scrosati, B. (1998) · Nature · doi:10.1038/28818 · Cited by 3,205
Fast Na+-ion transport in skeleton structures
Goodenough, J. B., Hong, H. Y.-P., & Kafalas, J. A. (1976) · Materials Research Bulletin · doi:10.1016/0025-5408(76)90077-5 · Cited by 2,284
Self-citationScrosati, B., Magistris, A., Mari, C. M., & Mariotto, G. (1993) · Springer eBooks · doi:10.1007/978-94-011-1916-0 · Cited by 2,218
Aurbach, D. (2000) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00431-6 · Cited by 2,130
Cited by
Items 401–500 of 578
Kwak, H., Wang, S., Park, J., Liu, Y., Kim, K. T., Choi, Y., Mo, Y., & Jung, Y. S. (2022) · ACS Energy Letters · doi:10.1021/acsenergylett.2c00438 · Cited by 341
Xu, Q., Sun, J., Yin, Y., & Guo, Y. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705235 · Cited by 340
Guo, R., Lu, L., Ouyang, M., & Feng, X. (2016) · Scientific Reports · doi:10.1038/srep30248 · Cited by 339
Muñoz‐Márquez, M. Á., Saurel, D., Gómez‐Cámer, J. L., Casas‐Cabanas, M., Castillo‐Martínez, E., & Rojo, T. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700463 · Cited by 338
Dual‐Phase Single‐Ion Pathway Interfaces for Robust Lithium Metal in Working Batteries
Xu, R., Xiao, Y., Zhang, R., Cheng, X., Zhao, C., Zhang, X., Yan, C., Zhang, Q., & Huang, J. (2019) · Advanced Materials · doi:10.1002/adma.201808392 · Cited by 338
Oxygen Loss in Layered Oxide Cathodes for Li-Ion Batteries: Mechanisms, Effects, and Mitigation
Zhang, H., Liu, H., Piper, L. F. J., Whittingham, M. S., & Zhou, G. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00327 · Cited by 338
Highly Rechargeable Lithium‐CO2 Batteries with a Boron‐ and Nitrogen‐Codoped Holey‐Graphene Cathode
Qie, L., Lin, Y., Connell, J. W., Xu, J., & Dai, L. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201701826 · Cited by 337
Zhang, Q., Chen, H., Luo, L., Zhao, B., Luo, H., Han, X., Wang, J., Wang, C., Yang, Y., Zhu, T., et al. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00239h · Cited by 337
Ding, J., Xu, R., Yao, N., Chen, X., Xiao, Y., Yao, Y., Yan, C., Xie, J., & Huang, J. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202101627 · Cited by 337
Designing safer lithium-based batteries with nonflammable electrolytes: A review
Zhang, S., Li, S., & Lu, Y. (2021) · eScience · doi:10.1016/j.esci.2021.12.003 · Cited by 337
Mechanical properties of cathode materials for lithium-ion batteries
Stallard, J. C., Wheatcroft, L., Booth, S. G., Boston, R., Corr, S. A., De Volder, M. F. L., Inkson, B. J., & Fleck, N. A. (2022) · Joule · doi:10.1016/j.joule.2022.04.001 · Cited by 336
A dendrite-suppressing composite ion conductor from aramid nanofibres
Tung, S.-O., Ho, S., Yang, M., Zhang, R., & Kotov, N. A. (2015) · Nature Communications · doi:10.1038/ncomms7152 · Cited by 336
Lithium Fluoride Additives for Stable Cycling of Lithium Batteries at High Current Densities
Choudhury, S., & Archer, L. A. (2016) · Advanced Electronic Materials · doi:10.1002/aelm.201500246 · Cited by 335
Yang, J., & Xia, Y. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b09938 · Cited by 334
Zhang, W., Richter, F. H., Culver, S. P., Leichtweiss, T., Lozano, J. G., Dietrich, C., Bruce, P. G., Zeier, W. G., & Janek, J. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b05132 · Cited by 334
Gel polymer electrolytes for rechargeable batteries toward wide-temperature applications
Zhou, X., Zhou, Y., Yu, L., Qi, L., Oh, K.-S., Hu, P., Lee, S.-Y., & Chen, C. (2024) · Chemical Society Reviews · doi:10.1039/d3cs00551h · Cited by 333
Zhao, Y., Xu, L., Mai, L., Han, C., An, Q., Xu, X., Liu, X., & Zhang, Q. (2012) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1210315109 · Cited by 330
Fast lithium growth and short circuit induced by localized-temperature hotspots in lithium batteries
Zhu, Y., Xie, J., Pei, A., Liu, B., Wu, Y., Lin, D., Li, J., Wang, H., Chen, H., Xu, J., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-09924-1 · Cited by 330
Advanced Liquid Electrolytes for Rechargeable Li Metal Batteries
Jie, Y., Ren, X., Cao, R., Cai, W., & Jiao, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201910777 · Cited by 330
The Role of Hydrothermal Carbonization in Sustainable Sodium‐Ion Battery Anodes
Xu, Z., Wang, J., Guo, Z., Xie, F., Liu, H., Yadegari, H., Tebyetekerwa, M., Ryan, M. P., Hu, Y., & Titirici, M. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202200208 · Cited by 328
Commercial and research battery technologies for electrical energy storage applications
Cho, J., Jeong, S., & Kim, Y. (2015) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2015.01.002 · Cited by 328
Self-citationYim, T., Park, M.-S., Yu, J.-S., Kim, K. J., Im, K. Y., Kim, J.-H., Jeong, G., Jo, Y. N., Woo, S.-G., Kang, K. S., et al. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.06.039 · Cited by 328
Self-citationLu, P., Li, C., Schneider, E. W., & Harris, S. J. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp4111019 · Cited by 326
Development of solid-state electrolytes for sodium-ion battery–A short review
Wang, Y., Song, S., Xu, C., Hu, N., Molenda, J., & Lu, L. (2019) · Nano Materials Science · doi:10.1016/j.nanoms.2019.02.007 · Cited by 326
Mehdi, B. L., Qian, J., Nasybulin, E., Park, C., Welch, D. A., Faller, R., Mehta, H., Henderson, W. A., Xu, W., Wang, C. M., et al. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00175 · Cited by 325
Challenges and development of lithium-ion batteries for low temperature environments
Piao, N., Gao, X., Yang, H., Guo, Z., Hu, G., Cheng, H.-M., & Li, F. (2022) · eTransportation · doi:10.1016/j.etran.2021.100145 · Cited by 324
Chakraborty, A., Kunnikuruvan, S., Kumar, S., Markovsky, B., Aurbach, D., Dixit, M., & Major, D. T. (2020) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b04066 · Cited by 322
Nonflammable organic electrolytes for high-safety lithium-ion batteries
Deng, K., Zeng, Q., Wang, D., Liu, Z., Wang, G., Qiu, Z., Zhang, Y., Xiao, M., & Meng, Y. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.07.018 · Cited by 322
Interface engineering toward stable lithium–sulfur batteries
Guo, Y., Niu, Q., Pei, F., Wang, Q., Zhang, Y., Du, L., Zhang, Y., Zhang, Y., Zhang, Y., Fan, L., et al. (2024) · Energy & Environmental Science · doi:10.1039/d3ee04183b · Cited by 322
Chun, S.-J., Choi, E.-S., Lee, E.-H., Kim, J. H., Lee, S.-Y., & Lee, S.-Y. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm32415f · Cited by 322
Zheng, X., Bommier, C., Luo, W., Jiang, L., Hao, Y., & Huang, Y. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.04.014 · Cited by 321
State of the Art of Lithium-Ion Battery SOC Estimation for Electrical Vehicles
Zhang, R., Xia, B., Li, B., Cao, L., Lai, Y., Zheng, W., Wang, H., & Wang, W. (2018) · Energies · doi:10.3390/en11071820 · Cited by 321
Hard carbons for sodium-ion batteries and beyond
Xie, F., Xu, Z., Guo, Z., & Titirici, M.-M. (2020) · Progress in Energy · doi:10.1088/2516-1083/aba5f5 · Cited by 319
Safe and recyclable lithium-ion capacitors using sacrificial organic lithium salt
Jeżowski, P., Crosnier, O., Deunf, E., Poizot, P., Béguin, F., & Brousse, T. (2018) · Nature Materials · doi:10.1038/nmat5029 · Cited by 318
One-pot solution coating of high quality LiF layer to stabilize Li metal anode
Lang, J., Long, Y., Qu, J., Luo, X., Wei, H., Huang, K., Zhang, H., Qi, L., Zhang, Q., Li, Z., et al. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.04.024 · Cited by 318
Zhu, Q., Li, J., Simon, P., & Xu, B. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2020.11.035 · Cited by 318
Understanding and suppression strategies toward stable Li metal anode for safe lithium batteries
Yasin, G., Arif, M., Mehtab, T., Lu, X., Yu, D., Muhammad, N., Nazir, M. T., & Song, H. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.09.020 · Cited by 317
Ionic liquids for high performance lithium metal batteries
Liu, K., Wang, Z., Shi, L., Jungsuttiwong, S., & Yuan, S. (2021) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2020.11.017 · Cited by 317
The Nature of Lithium Battery Materials under Oxygen Evolution Reaction Conditions
Lee, S. W., Carlton, C., Risch, M., Surendranath, Y., Chen, S., Furutsuki, S., Yamada, A., Nocera, D. G., & Shao-Horn, Y. (2012) · Journal of the American Chemical Society · doi:10.1021/ja307814j · Cited by 316
Beyond Insertion for Na‐Ion Batteries: Nanostructured Alloying and Conversion Anode Materials
Zhang, H., Hasa, I., & Passerini, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702582 · Cited by 316
Zhou, M., Chen, Y., Fang, G., & Liang, S. (2022) · Energy Storage Materials · doi:10.1016/j.ensm.2021.12.011 · Cited by 316
Zhu, S., Li, J., Deng, X., He, C., Liu, E., He, F., Shi, C., & Zhao, N. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605017 · Cited by 314
Kim, K., Ma, H., Park, S., & Choi, N.-S. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c00468 · Cited by 314
Hao, H., Hutter, T., Boyce, B. L., Watt, J., Liu, P., & Mitlin, D. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00838 · Cited by 314
Biomass-derived materials for electrochemical energy storages
Zhang, L., Liu, Z., Cui, G., & Chen, L. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.09.003 · Cited by 313
A review on the failure and regulation of solid electrolyte interphase in lithium batteries
Ding, J.-F., Xu, R., Yan, C., Li, B.-Q., Yuan, H., & Huang, J.-Q. (2021) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2020.11.016 · Cited by 313
Porcarelli, L., Shaplov, A. S., Bella, F., Nair, J. R., Mecerreyes, D., & Gerbaldi, C. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00216 · Cited by 312
Advances in Structure and Property Optimizations of Battery Electrode Materials
Meng, J., Guo, H., Niu, C., Zhao, Y., Xu, L., Li, Q., & Mai, L. (2017) · Joule · doi:10.1016/j.joule.2017.08.001 · Cited by 312
Han, Y., Jung, S. H., Kwak, H., Jun, S., Kwak, H. H., Lee, J. H., Hong, S., & Jung, Y. S. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202100126 · Cited by 312
A rechargeable aqueous Zn2+-battery with high power density and a long cycle-life
Wang, F., Hu, E., Sun, W., Gao, T., Ji, X., Fan, X., Han, F., Yang, X.-Q., Xu, K., & Wang, C. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01883a · Cited by 311
Ultrafast high-capacity NiZn battery with NiAlCo-layered double hydroxide
Gong, M., Li, Y., Zhang, H., Zhang, B., Zhou, W., Feng, J., Wang, H., Liang, Y., Fan, Z., Liu, J., et al. (2014) · Energy & Environmental Science · doi:10.1039/c4ee00317a · Cited by 309
Dixit, M., Markovsky, B., Schipper, F., Aurbach, D., & Major, D. T. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.7b06122 · Cited by 309
Ma, G., Xu, S., Jiang, B., Cheng, C., Yang, X., Shen, Y., Yang, T., Huang, Y., Ding, H., & Yuan, Y. (2022) · Energy & Environmental Science · doi:10.1039/d2ee01676a · Cited by 309
Mao, M., Cui, C., Wu, M., Zhang, M., Gao, T., Fan, X., Chen, J., Wang, T., Ma, J., & Wang, C. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.01.001 · Cited by 308
Two‐dimensional MXenes for lithium‐sulfur batteries
Zhang, C. (., Cui, L., Abdolhosseinzadeh, S., & Heier, J. (2020) · InfoMat · doi:10.1002/inf2.12080 · Cited by 308
Historical development and novel concepts on electrolytes for aqueous rechargeable batteries
Chen, S., Zhang, M., Zou, P., Sun, B., & Tao, S. (2022) · Energy & Environmental Science · doi:10.1039/d2ee00004k · Cited by 308
Challenges and Prospects of Sodium‐Ion and Potassium‐Ion Batteries for Mass Production
Sada, K., Darga, J., & Manthiram, A. (2023) · Advanced Energy Materials · doi:10.1002/aenm.202302321 · Cited by 308
Capacity Fade Analysis of Sulfur Cathodes in Lithium–Sulfur Batteries
Yan, J., Liu, X., & Li, B. (2016) · Advanced Science · doi:10.1002/advs.201600101 · Cited by 307
Electrolytes for electrochemical energy storage
Xia, L., Yu, L., Hu, D., & Chen, G. Z. (2017) · Materials Chemistry Frontiers · doi:10.1039/c6qm00169f · Cited by 305
Synthesis of MoS2 nanosheet–graphene nanosheet hybrid materials for stable lithium storage
Zhou, X., Wan, L.-J., & Guo, Y.-G. (2013) · Chemical Communications · doi:10.1039/c3cc38780a · Cited by 304
Grain Boundary Contributions to Li-Ion Transport in the Solid Electrolyte Li7La3Zr2O12 (LLZO)
Yu, S., & Siegel, D. J. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b02805 · Cited by 304
Huang, J., Wu, K., Xu, G., Wu, M., Dou, S., & Wu, C. (2023) · Chemical Society Reviews · doi:10.1039/d2cs01029a · Cited by 304
Yang, B., Chen, J., Lei, S., Guo, R., Li, H., Shi, S., & Yan, X. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702409 · Cited by 303
Li, J., Yan, D., Lu, T., Yao, Y., & Pan, L. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.05.046 · Cited by 302
Dedryvère, R., Foix, D., Franger, S., Patoux, S., Daniel, L., & Gonbeau, D. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp1026509 · Cited by 301
Interfacial Electronic Properties Dictate Li Dendrite Growth in Solid Electrolytes
Tian, H.-K., Liu, Z., Ji, Y., Chen, L.-Q., & Qi, Y. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b01967 · Cited by 301
Ether‐Based Electrolyte Chemistry Towards High‐Voltage and Long‐Life Na‐Ion Full Batteries
Liang, H., Gu, Z., Zhao, X., Guo, J., Yang, J., Li, W., Li, B., Liu, Z., Li, W., & Wu, X. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202112550 · Cited by 301
Bhatt, M. D., & O'Dwyer, C. (2015) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp05552g · Cited by 300
Recent development of ionic liquid-based electrolytes in lithium-ion batteries
Tang, X., Lv, S., Jiang, K., Zhou, G., & Liu, X. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.231792 · Cited by 300
A Review on Regulating Li+Solvation Structures in Carbonate Electrolytes for Lithium Metal Batteries
Piao, Z., Gao, R., Liu, Y., Zhou, G., & Cheng, H. (2023) · Advanced Materials · doi:10.1002/adma.202206009 · Cited by 300
A review on anode for lithium-sulfur batteries: Progress and prospects
Zhao, H., Deng, N., Yan, J., Kang, W., Ju, J., Ruan, Y., Wang, X., Zhuang, X., Li, Q., & Cheng, B. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.04.112 · Cited by 299
Multiscale Understanding and Architecture Design of High Energy/Power Lithium‐Ion Battery Electrodes
Zhang, X., Ju, Z., Zhu, Y., Takeuchi, K. J., Takeuchi, E. S., Marschilok, A. C., & Yu, G. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000808 · Cited by 299
Mesoporous Prussian Blue Analogues: Template‐Free Synthesis and Sodium‐Ion Battery Applications
Yue, Y., Binder, A. J., Guo, B., Zhang, Z., Qiao, Z., Tian, C., & Dai, S. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201310679 · Cited by 296
Advances in Natural Biopolymer‐Based Electrolytes and Separators for Battery Applications
Lizundia, E., & Kundu, D. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202005646 · Cited by 295
Shi, S., Qi, Y., Li, H., & Hector, L. G. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp310591u · Cited by 294
Recent progress in rechargeable alkali metal–air batteries
Zhang, X., Wang, X.-G., Xie, Z., & Zhou, Z. (2016) · Green Energy & Environment · doi:10.1016/j.gee.2016.04.004 · Cited by 294
Beyond Li-ion: electrode materials for sodium- and magnesium-ion batteries
Massé, R. C., Uchaker, E., & Cao, G. (2015) · Science China Materials · doi:10.1007/s40843-015-0084-8 · Cited by 292
Dual-functional gum arabic binder for silicon anodes in lithium ion batteries
Ling, M., Xu, Y., Zhao, H., Gu, X., Qiu, J., Li, S., Wu, M., Song, X., Yan, C., Liu, G., et al. (2015) · Nano Energy · doi:10.1016/j.nanoen.2014.12.011 · Cited by 291
Jin, Y., Kneusels, N.-J. H., Magusin, P. C. M. M., Kim, G., Castillo-Martínez, E., Marbella, L. E., Kerber, R. N., Howe, D. J., Paul, S., Liu, T., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b06834 · Cited by 291
Surface Modified MXene‐Based Nanocomposites for Electrochemical Energy Conversion and Storage
Yu, H., Wang, Y., Jing, Y., Ma, J., Du, C., & Yan, Q. (2019) · Small · doi:10.1002/smll.201901503 · Cited by 291
Srivastava, S., Schaefer, J. L., Yang, Z., Tu, Z., & Archer, L. A. (2014) · Advanced Materials · doi:10.1002/adma.201303070 · Cited by 290
Wu, Y., Huang, L., Huang, X., Guo, X., Liu, D., Zheng, D., Zhang, X., Ren, R., Qu, D., & Chen, J. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01798g · Cited by 290
Wang, C., Wang, T., Wang, L., Hu, Z., Cui, Z., Li, J., Dong, S., Zhou, X., & Cui, G. (2019) · Advanced Science · doi:10.1002/advs.201901036 · Cited by 290
Wang, X., & Yushin, G. (2015) · Energy & Environmental Science · doi:10.1039/c5ee01254f · Cited by 289
Recent Progress in Research on High‐Voltage Electrolytes for Lithium‐Ion Batteries
Tan, S., Ji, Y. J., Zhang, Z. R., & Yang, Y. (2014) · ChemPhysChem · doi:10.1002/cphc.201402175 · Cited by 288
Liu, K., Zhuo, D., Lee, H., Liu, W., Lin, D., Lu, Y., & Cui, Y. (2017) · Advanced Materials · doi:10.1002/adma.201603987 · Cited by 288
Garnet Solid Electrolyte Protected Li-Metal Batteries
Liu, B., Gong, Y., Fu, K., Han, X., Yao, Y., Pastel, G., Yang, C., Xie, H., Wachsman, E. D., & Hu, L. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b03887 · Cited by 287
Redox-active cathode interphases in solid-state batteries
Koerver, R., Walther, F., Aygün, I., Sann, J., Dietrich, C., Zeier, W. G., & Janek, J. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta07641j · Cited by 287
Advances in Interfaces between Li Metal Anode and Electrolyte
Zhang, X., Cheng, X., & Zhang, Q. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201701097 · Cited by 287
Coupled thermal–electrochemical modelling of uneven heat generation in lithium-ion battery packs
Wu, B., Yufit, V., Marinescu, M., Offer, G. J., Martinez-Botas, R. F., & Brandon, N. P. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.05.164 · Cited by 286
Wang, L., Wang, D., Dong, Z., Zhang, F., & Jin, J. (2013) · Nano Letters · doi:10.1021/nl400269d · Cited by 285
Evaluating the performance of nanostructured materials as lithium-ion battery electrodes
Armstrong, M. J., O’Dwyer, C., Macklin, W. J., & Holmes, J. D. (2014) · Nano Research · doi:10.1007/s12274-013-0375-x · Cited by 285
Silicon Anode Design for Lithium-Ion Batteries: Progress and Perspectives
Franco Gonzalez, A., Yang, N.-H., & Liu, R.-S. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.7b07793 · Cited by 284
Mechanistic Insights of Zn2+ Storage in Sodium Vanadates
Guo, X., Fang, G., Zhang, W., Zhou, J., Shan, L., Wang, L., Wang, C., Lin, T., Tang, Y., & Liang, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201801819 · Cited by 284
Hou, L.-P., Zhang, X.-Q., Li, B.-Q., & Zhang, Q. (2021) · Materials Today · doi:10.1016/j.mattod.2020.10.021 · Cited by 283
Rechargeable aqueous zinc-ion batteries: Mechanism, design strategies and future perspectives
Liu, H., Wang, J.-G., You, Z., Wei, C., Kang, F., & Wei, B. (2021) · Materials Today · doi:10.1016/j.mattod.2020.08.021 · Cited by 282
Promises and Challenges of the Practical Implementation of Prelithiation in Lithium‐Ion Batteries
Zhan, R., Wang, X., Chen, Z., Seh, Z. W., Wang, L., & Sun, Y. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202101565 · Cited by 282
Durable Carbon-Coated Li2S Core–Shell Spheres for High Performance Lithium/Sulfur Cells
Nan, C., Lin, Z., Liao, H., Song, M.-K., Li, Y., & Cairns, E. J. (2014) · Journal of the American Chemical Society · doi:10.1021/ja412943h · Cited by 282
Wu, Z., Li, R., Zhang, S., lv, L., Deng, T., Zhang, H., Zhang, R., Liu, J., Ding, S., Fan, L., et al. (2023) · Chem · doi:10.1016/j.chempr.2022.10.027 · Cited by 282
Li, L., Jacobs, R., Gao, P., Gan, L., Wang, F., Morgan, D., & Jin, S. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b00061 · Cited by 281
Metadata
- Authors
- Goodenough, J. B., & Kim, Y.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-08-28
- Volume
- 22
- Issue
- 3
- Pages
- 587-603
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W3023435578
- Cited by
- 10,943
- References
- 59
- FWCI
- 153.65
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.