The DOI matches its Crossref record.
Options for Achieving a 50% Cut in Industrial Carbon Emissions by 2050
Abstract
Carbon emissions from industry are dominated by production of goods in steel, cement plastic, paper, and aluminum. Demand for these materials is anticipated to double at least by 2050, by which time global carbon emissions must be reduced by at least 50%. To evaluate the challenge of meeting this target the global flows of these materials and their associated emissions are projected to 2050 under five technical scenarios. A reference scenario includes all existing and emerging efficiency measures but cannot provide sufficient reduction. The application of carbon sequestration to primary production proves to be sufficient only for cement The emissions target can always be met by reducing demand, for instance through product life extension, material substitution, or "light-weighting". Reusing components shows significant potential particularly within construction. Radical process innovation may also be possible. The results show that the first two strategies, based on increasing primary production, cannot achieve the required emissions reductions, so should be balanced by the vigorous pursuit of material efficiency to allow provision of increased material services with reduced primary production.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement
McLellan, B. C., Williams, R. P., Lay, J., van Riessen, A., & Corder, G. D. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.02.010 · Cited by 1,949
Haas, W., Krausmann, F., Wiedenhofer, D., & Heinz, M. (2015) · Journal of Industrial Ecology · doi:10.1111/jiec.12244 · Cited by 1,154
Material efficiency: A white paper
Allwood, J. M., Ashby, M. F., Gutowski, T. G., & Worrell, E. (2011) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2010.11.002 · Cited by 927
Self-citationLife Cycle Assessment of Metals: A Scientific Synthesis
Nuss, P., & Eckelman, M. J. (2014) · PLoS ONE · doi:10.1371/journal.pone.0101298 · Cited by 777
Hertwich, E. G., Gibon, T., Bouman, E. A., Arvesen, A., Suh, S., Heath, G. A., Bergesen, J. D., Ramirez, A., Vega, M. I., & Shi, L. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1312753111 · Cited by 759
Krausmann, F., Wiedenhofer, D., Lauk, C., Haas, W., Tanikawa, H., Fishman, T., Miatto, A., Schandl, H., & Haberl, H. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1613773114 · Cited by 710
Bataille, C., Åhman, M., Neuhoff, K., Nilsson, L. J., Fischedick, M., Lechtenböhmer, S., Solano-Rodriquez, B., Denis-Ryan, A., Stiebert, S., Waisman, H., et al. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.03.107 · Cited by 680
Pauliuk, S. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.10.019 · Cited by 554
The Materials Science behind Sustainable Metals and Alloys
Raabe, D. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00799 · Cited by 526
Carbon Emissions of Infrastructure Development
Müller, D. B., Liu, G., Løvik, A. N., Modaresi, R., Pauliuk, S., Steinhoff, F. S., & Brattebø, H. (2013) · Environmental Science & Technology · doi:10.1021/es402618m · Cited by 445
Solvent-based separation and recycling of waste plastics: A review
Zhao, Y.-B., Lv, X.-D., & Ni, H.-G. (2018) · Chemosphere · doi:10.1016/j.chemosphere.2018.06.095 · Cited by 367
The growing importance of scope 3 greenhouse gas emissions from industry
Hertwich, E. G., & Wood, R. (2018) · Environmental Research Letters · doi:10.1088/1748-9326/aae19a · Cited by 350
Increased carbon footprint of materials production driven by rise in investments
(2021) · doi:10.1038/s41561-021-00690-8 · Cited by 355
The Environmental Impacts of Reuse: A Review
Cooper, D. R., & Gutowski, T. G. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12388 · Cited by 337
Pauliuk, S., Milford, R. L., Müller, D. B., & Allwood, J. M. (2013) · Environmental Science & Technology · doi:10.1021/es303149z · Cited by 334
Self-citationMiller, S. A., Habert, G., Myers, R. J., & Harvey, J. T. (2021) · One Earth · doi:10.1016/j.oneear.2021.09.011 · Cited by 308
A bottom-up analysis of China’s iron and steel industrial energy consumption and CO2 emissions
Chen, W., Yin, X., & Ma, D. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.06.002 · Cited by 306
van Ruijven, B. J., van Vuuren, D. P., Boskaljon, W., Neelis, M. L., Saygin, D., & Patel, M. K. (2016) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2016.04.016 · Cited by 305
Major metals demand, supply, and environmental impacts to 2100: A critical review
Watari, T., Nansai, K., & Nakajima, K. (2021) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2020.105107 · Cited by 299
Mapping the Global Flow of Aluminum: From Liquid Aluminum to End-Use Goods
Cullen, J. M., & Allwood, J. M. (2013) · Environmental Science & Technology · doi:10.1021/es304256s · Cited by 296
Self-citationIndustrial ecology in integrated assessment models
Pauliuk, S., Arvesen, A., Stadler, K., & Hertwich, E. G. (2017) · Nature Climate Change · doi:10.1038/nclimate3148 · Cited by 288
Napp, T. A., Gambhir, A., Hills, T. P., Florin, N., & Fennell, P. S. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.10.036 · Cited by 280
Steel all over the world: Estimating in-use stocks of iron for 200 countries
Pauliuk, S., Wang, T., & Müller, D. B. (2013) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2012.11.008 · Cited by 279
Mapping the global flow of steel: From steelmaking to end-use goods
Cullen, J. M., Allwood, J. M., & Bambach, M. D. (2012) · Environmental Science & Technology · doi:10.1021/es302433p · Cited by 268
Self-citationThe Roles of Energy and Material Efficiency in Meeting Steel Industry CO 2 Targets
Milford, R. L., Pauliuk, S., Allwood, J. M., & Müller, D. B. (2013) · Environmental Science & Technology · doi:10.1021/es3031424 · Cited by 254
Self-citationHow Will Copper Contamination Constrain Future Global Steel Recycling?
Daehn, K. E., Cabrera Serrenho, A., & Allwood, J. M. (2017) · Environmental Science & Technology · doi:10.1021/acs.est.7b00997 · Cited by 242
Self-citationThe greenhouse gas emissions and mitigation options for materials used in UK construction
Giesekam, J., Barrett, J., Taylor, P., & Owen, A. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.04.035 · Cited by 202
Iacovidou, E., & Purnell, P. (2016) · Science of The Total Environment · doi:10.1016/j.scitotenv.2016.03.098 · Cited by 200
Sustainability through alloy design: Challenges and opportunities
Cann, J. L., De Luca, A., Dunand, D. C., Dye, D., Miracle, D. B., Oh, H. S., Olivetti, E. A., Pollock, T. M., Poole, W. J., Yang, R., et al. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100722 · Cited by 191
Utilization of structural steel in buildings
Moynihan, M. C., & Allwood, J. M. (2014) · Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rspa.2014.0170 · Cited by 141
Self-citationReusing Steel and Aluminum Components at End of Product Life
Cooper, D. R., & Allwood, J. M. (2012) · Environmental Science & Technology · doi:10.1021/es301093a · Cited by 118
Self-citationFrom Waste Management to Component Management in the Construction Industry
Rose, C., & Stegemann, J. (2018) · Sustainability · doi:10.3390/su10010229 · Cited by 97
Metal Dissipation and Inefficient Recycling Intensify Climate Forcing
Ciacci, L., Harper, E. M., Nassar, N. T., Reck, B. K., & Graedel, T. E. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.6b02714 · Cited by 78
Material savings through structural steel reuse: A case study in Genoa
Pongiglione, M., & Calderini, C. (2014) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2014.02.011 · Cited by 69
Component level strategies for exploiting the lifespan of steel in products
Cooper, D. R., Skelton, A. C. H., Moynihan, M. C., & Allwood, J. M. (2014) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2013.11.014 · Cited by 69
Self-citationPauliuk, S., Dhaniati, N. M. A., & Müller, D. B. (2012) · Environmental Science & Technology · doi:10.1021/es201799k · Cited by 60
Goyal, H., Kumar, R., & Mondal, P. (2023) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2023.136857 · Cited by 38
Gutowski, T., Cooper, D., & Sahni, S. (2017) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2016.0368 · Cited by 34
Leveraging material efficiency as an energy and climate instrument for heavy industries in the EU
Hernandez, A. G., Cooper-Searle, S., Skelton, A. C. H., & Cullen, J. M. (2018) · Energy Policy · doi:10.1016/j.enpol.2018.05.055 · Cited by 32
Self-citationReduction of the carbon footprint through polystyrene recycling: Economical evaluation
Gutiérrez, C., Rodríguez, J. F., Gracia, I., de Lucas, A., & García, M. T. (2016) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2015.12.004 · Cited by 18
Metadata
- Authors
- Allwood, J. M., Cullen, J. M., & Milford, R. L.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-02-02
- Volume
- 44
- Issue
- 6
- Pages
- 1888-1894
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W2033198823
- Cited by
- 490
- References
- 0
- FWCI
- 42.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.