Thermogelling Biodegradable Polymers with Hydrophilic Backbones: PEG-g-PLGA
The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
Abstract
The aqueous solutions of poly(ethylene glycol) grafted with poly(lactic acid- co -glycolic acid) flow freely at room temperature but form gels at higher temperature. The existence of micelles in water at low polymer concentration was confirmed by cryo-transmission electron microscopy and dye solubilization studies. The micellar diameter is about 9 nm, and the critical micelle concentration is in a range of 0.01−0.05 wt %. The critical gel concentration, above which a gel phase appears, was 16 wt %, and the sol-to-gel transition temperature was slightly affected by the concentration between 16 and 25 wt %. At sol-to-gel transition, viscosity and modulus increased abruptly, and 13 C NMR showed molecular motion of hydrophilic poly(ethylene glycol) backbones decreased while that of hydrophobic poly(lactic acid- co -glycolic acid) side chains increased. The hydrogel of PEG- g -PLGA with hydrophilic backbones was transparent during degradation and remained a gel for 1 week, suggesting a promising material for short-term drug delivery.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Moreover, the physical changes in stimuli-responsive polymers are reversible and they are capable of returning to their initial state after the trigger is removed [21].”
From Review of Stimuli-Responsive Polymers in Drug Delivery and Textile Application (2019) · cites this paper as [21]
In the citing paper
“The recent focus on functional polymers mostly centers around stimuli-responsive polymers and these polymers have attracted great attention since these can show sol-gel transitions in response to external triggers like temperature, pH, and light [20,21].”
From Review of Stimuli-Responsive Polymers in Drug Delivery and Textile Application (2019) · cites this paper as [21]
Citations
Cites
Intermolecular and Surface Forces
(2011) · Elsevier eBooks · doi:10.1016/c2011-0-05119-0 · Cited by 8,968
Odian, G. (2004) · doi:10.1002/047147875x · Cited by 7,158
Polymersomes: Tough Vesicles Made from Diblock Copolymers
Discher, B. M., Won, Y.-Y., Ege, D. S., Lee, J. C.-M., Bates, F. S., Discher, D. E., & Hammer, D. A. (1999) · Science · doi:10.1126/science.284.5417.1143 · Cited by 2,512
Self-citationBiodegradable block copolymers as injectable drug-delivery systems
Jeong, B., Bae, Y. H., Lee, D. S., & Kim, S. W. (1997) · Nature · doi:10.1038/42218 · Cited by 1,997
Self-citationFeil, H., Bae, Y. H., Feijen, J., & Kim, S. W. (1993) · Macromolecules · doi:10.1021/ma00062a016 · Cited by 1,073
Jeong, B., Bae, Y. H., & Kim, S. W. (2000) · Journal of Controlled Release · doi:10.1016/s0168-3659(99)00194-7 · Cited by 635
Self-citationThermoreversible Gelation of PEG−PLGA−PEG Triblock Copolymer Aqueous Solutions
Jeong, B., Bae, Y. H., & Kim, S. W. (1999) · Macromolecules · doi:10.1021/ma9908999 · Cited by 619
Self-citationControlled environment vitrification system: An improved sample preparation technique
Bellare, J. R., Davis, H. T., Scriven, L. E., & Talmon, Y. (1988) · Journal of Electron Microscopy Technique · doi:10.1002/jemt.1060100111 · Cited by 614
Ordered Mesoporous Polymers of Tunable Pore Size from Colloidal Silica Templates
Johnson, S. A., Ollivier, P. J., & Mallouk, T. E. (1999) · Science · doi:10.1126/science.283.5404.963 · Cited by 603
Influence of CO2 emission rates on the stability of the thermohaline circulation
Stocker, T. F., & Schmittner, A. (1997) · Nature · doi:10.1038/42224 · Cited by 560
Research works printed but not linked: 13
- Hill-West J. L., 1994, Proc. Natl. Acad. Sci. U.S.A., 91, 5971
- Thomas J. L., 1995, J. Am. Chem. Soc., 117, 2950
- Malstom M., 1992, Macromolecules, 25, 5450
- Yang J., 1994, Macromolecules, 27, 680
- Wout Z. G. M., 1992, J. Parenter. Sci. Technol., 46, 200
- Jeong B., 2000, J. Biomed. Mater. Res., 50, 177, 10.1002/(sici)1097-4636(200005)50:2<171::aid-jbm11>3.0.co;2-f · doi:10.1002/(sici)1097-4636(200005)50:2<171::aid-jbm11>3.0.co;2-f
- Jeong B., J. Am. Chem. Soc., submitted.
- Prescription, http://www.ifex.com/ifpre.html
- Tanodekaew S., 1997, Macromol. Chem. Phys., 198, 3395
- Alexandrisdis P., 1994, Macromolecules, 27, 2425
- Cau F., 1996, Macromolecules, 29, 178
- Deng Y., 1992, J. Chem. Soc., Faraday Trans., 88, 1446
- Yu G. E., 1992, J. Chem. Soc., Faraday Trans., 88, 2544
Cited by
Stimuli-reponsive polymers and their bioconjugates
GIL, E., & HUDSON, S. (2004) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2004.08.003 · Cited by 2,385
Novel crosslinking methods to design hydrogels
Hennink, W. E., & van Nostrum, C. F. (2002) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(01)00240-x · Cited by 1,962
Thermosensitive sol-gel reversible hydrogels
Jeong, B., Kim, S. W., & Bae, Y. H. (2002) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(01)00242-3 · Cited by 1,478
Self-citationChitosan and its derivatives for tissue engineering applications
Kim, I.-Y., Seo, S.-J., Moon, H.-S., Yoo, M.-K., Park, I.-Y., Kim, B.-C., & Cho, C.-S. (2008) · Biotechnology Advances · doi:10.1016/j.biotechadv.2007.07.009 · Cited by 1,433
In situ-forming hydrogels--review of temperature-sensitive systems
Ruel-Gariépy, E., & Leroux, J.-C. (2004) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2004.03.019 · Cited by 1,297
“The critical gel concentrations of both polymers were approximately 16 [114] and 22 wt% [116], respectively.”
BackgroundChemical syntheses of biodegradable polymers
Okada, M. (2002) · Progress in Polymer Science · doi:10.1016/s0079-6700(01)00039-9 · Cited by 1,199
Novel crosslinking methods to design hydrogels
Hennink, W. E., & van Nostrum, C. F. (2012) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.09.009 · Cited by 1,171
Lessons from nature: stimuli-responsive polymers and their biomedical applications
Jeong, B., & Gutowska, A. (2002) · Trends in Biotechnology · doi:10.1016/s0167-7799(02)01962-5 · Cited by 856
Self-citationThermosensitive water-soluble copolymers with doubly responsive reversibly interacting entities
Dimitrov, I., Trzebicka, B., Müller, A. H. E., Dworak, A., & Tsvetanov, C. B. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.07.001 · Cited by 750
Injectable matrices and scaffolds for drug delivery in tissue engineering
Kretlow, J. D., Klouda, L., & Mikos, A. G. (2007) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2007.03.013 · Cited by 629
Stimuli-Responsive Polymeric Nanocarriers for Drug Delivery, Imaging, and Theragnosis
Das, S. S., Bharadwaj, P., Bilal, M., Barani, M., Rahdar, A., Taboada, P., Bungau, S., & Kyzas, G. Z. (2020) · Polymers · doi:10.3390/polym12061397 · Cited by 581
Thermosensitive sol–gel reversible hydrogels
Jeong, B., Kim, S. W., & Bae, Y. H. (2012) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.09.012 · Cited by 533
Self-citationSynthesis and Biological Application of Polylactic Acid
Li, G., Zhao, M., Xu, F., Yang, B., Li, X., Meng, X., Teng, L., Sun, F., & Li, Y. (2020) · Molecules · doi:10.3390/molecules25215023 · Cited by 492
Injectable Biodegradable Hydrogels
Nguyen, M. K., & Lee, D. S. (2010) · Macromolecular Bioscience · doi:10.1002/mabi.200900402 · Cited by 481
Injectable gels for tissue engineering
Gutowska, A., Jeong, B., & Jasionowski, M. (2001) · The Anatomical Record · doi:10.1002/ar.1115 · Cited by 441
Self-citationDevelopment of Polymeric Nanoparticles for Blood–Brain Barrier Transfer—Strategies and Challenges
Zhang, W., Mehta, A., Tong, Z., Esser, L., & Voelcker, N. H. (2021) · Advanced Science · doi:10.1002/advs.202003937 · Cited by 430
Stimuli‐Responsive Materials for Controlled Release of Theranostic Agents
Wang, Y., Shim, M. S., Levinson, N. S., Sung, H., & Xia, Y. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400279 · Cited by 378
PEG–PLGA copolymers: Their structure and structure-influenced drug delivery applications
Zhang, K., Tang, X., Zhang, J., Lu, W., Lin, X., Zhang, Y., Tian, B., Yang, H., & He, H. (2014) · Journal of Controlled Release · doi:10.1016/j.jconrel.2014.03.026 · Cited by 374
Melt–solid polycondensation of lactic acid and its biodegradability
Maharana, T., Mohanty, B., & Negi, Y. S. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.10.001 · Cited by 368
PEG-based thermosensitive and biodegradable hydrogels
Shi, J., Yu, L., & Ding, J. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2021.04.009 · Cited by 341
Thermosensitive Hydrogels as Scaffolds for Cartilage Tissue Engineering
Zhang, Y., Yu, J., Ren, K., Zuo, J., Ding, J., & Chen, X. (2019) · Biomacromolecules · doi:10.1021/acs.biomac.9b00043 · Cited by 334
Singh, N. K., & Lee, D. S. (2014) · Journal of Controlled Release · doi:10.1016/j.jconrel.2014.04.056 · Cited by 326
Ruel-Gariépy, E., Leclair, G., Hildgen, P., Gupta, A., & Leroux, J.-C. (2002) · Journal of Controlled Release · doi:10.1016/s0168-3659(02)00146-3 · Cited by 308
Recent advances in PLGA-based biomaterials for bone tissue regeneration
Jin, S., Xia, X., Huang, J., Yuan, C., Zuo, Y., Li, Y., & Li, J. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2021.03.067 · Cited by 295
Thermo-sensitive hydrogels for delivering biotherapeutic molecules: A review
Huang, H., Qi, X., Chen, Y., & Wu, Z. (2019) · Saudi Pharmaceutical Journal · doi:10.1016/j.jsps.2019.08.001 · Cited by 281
Injectable Block Copolymer Hydrogels: Achievements and Future Challenges for Biomedical Applications
Huynh, C. T., Nguyen, M. K., & Lee, D. S. (2011) · Macromolecules · doi:10.1021/ma201261m · Cited by 240
In situ forming hydrogels based on chitosan for drug delivery and tissue regeneration
Liu, L., Gao, Q., Lu, X., & Zhou, H. (2016) · Asian Journal of Pharmaceutical Sciences · doi:10.1016/j.ajps.2016.07.001 · Cited by 232
Park, M. H., Joo, M. K., Choi, B. G., & Jeong, B. (2012) · Accounts of Chemical Research · doi:10.1021/ar200162j · Cited by 226
Self-citationReview of Stimuli-Responsive Polymers in Drug Delivery and Textile Application
CHATTERJEE, S., & Chi-leung HUI, P. (2019) · Molecules · doi:10.3390/molecules24142547 · Cited by 201
“The LSCT can be defined as a critical temperature at which the polymeric solution shows a phase separation, which moves from the isotropic state to the anisotropic state [21].”
BackgroundInfluentialOverstreet, D. J., Dutta, D., Stabenfeldt, S. E., & Vernon, B. L. (2012) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.23081 · Cited by 199
Chatterjee, S., Hui, P. C.-L., & Kan, C.-W. (2018) · Polymers · doi:10.3390/polym10050480 · Cited by 196
“Thermoresponsive polymers are capable of rapidly changing their physical properties with increasing temperature and they belong to the class of stimuli-responsive materials [63,64].”
BackgroundBimaterial Microcantilevers as a Hybrid Sensing Platform
Singamaneni, S., LeMieux, M. C., Lang, H. P., Gerber, C., Lam, Y., Zauscher, S., Datskos, P. G., Lavrik, N. V., Jiang, H., Naik, R. R., et al. (2008) · Advanced Materials · doi:10.1002/adma.200701667 · Cited by 185
Sanborn, T. J., Messersmith, P. B., & Barron, A. E. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00002-9 · Cited by 182
Perspectives on: PEO-PPO-PEO Triblock Copolymers and their Biomedical Applications
Fusco, S., Borzacchiello, A., & Netti, P. A. (2006) · Journal of Bioactive and Compatible Polymers · doi:10.1177/0883911506063207 · Cited by 166
Modified biopolymer-dextrin based crosslinked hydrogels: application in controlled drug delivery
Das, D., & Pal, S. (2015) · RSC Advances · doi:10.1039/c4ra16103c · Cited by 162
Thermosensitive Polymeric Hydrogels As Drug Delivery Systems
Gong, C., Qi, T., Wei, X., Qu, Y., Wu, Q., Luo, F., & Qian, Z. (2012) · Current Medicinal Chemistry · doi:10.2174/09298673130109 · Cited by 161
Thermosensitive Self-Assembling Block Copolymers as Drug Delivery Systems
Bonacucina, G., Cespi, M., Mencarelli, G., Giorgioni, G., & Palmieri, G. F. (2011) · Polymers · doi:10.3390/polym3020779 · Cited by 156
Injectable implants for the sustained release of protein and peptide drugs
Agarwal, P., & Rupenthal, I. D. (2013) · Drug Discovery Today · doi:10.1016/j.drudis.2013.01.013 · Cited by 154
Hydrolytic degradation of oligo(lactic acid): a kinetic and mechanistic study
van Nostrum, C. F., Veldhuis, T. F. J., Bos, G. W., & Hennink, W. E. (2004) · Polymer · doi:10.1016/j.polymer.2004.08.001 · Cited by 150
Biodegradable Thermogelling Polymers: Working Towards Clinical Applications
Dou, Q. Q., Liow, S. S., Ye, E., Lakshminarayanan, R., & Loh, X. J. (2014) · Advanced Healthcare Materials · doi:10.1002/adhm.201300627 · Cited by 139
Biodegradable thermosensitive copolymer hydrogels for drug delivery
Loh, X. J., & Li, J. (2007) · Expert Opinion on Therapeutic Patents · doi:10.1517/13543776.17.8.965 · Cited by 140
Micellization of synthetic and polysaccharides-based graft copolymers in aqueous media
Atanase, L. I., Desbrières, J., & Riess, G. (2017) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2017.06.001 · Cited by 140
SHIM, W., Kim, J. H., Kim, K., KIM, Y., PARK, R., KIM, I., KWON, I., & Lee, D.-H. (2006) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2006.09.027 · Cited by 139
Rheological studies of PLLA–PEO–PLLA triblock copolymer hydrogels
Aamer, K. A., Sardinha, H., Bhatia, S. R., & Tew, G. N. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00632-x · Cited by 138
Zhang, H., Yu, L., & Ding, J. (2008) · Macromolecules · doi:10.1021/ma7026484 · Cited by 134
Novel drug release profiles from micellar solutions of PLA–PEO–PLA triblock copolymers
Agrawal, S. K., Sanabria-DeLong, N., Coburn, J. M., Tew, G. N., & Bhatia, S. R. (2006) · Journal of Controlled Release · doi:10.1016/j.jconrel.2005.12.024 · Cited by 114
Lu, J., Shi, M., & Shoichet, M. S. (2008) · Bioconjugate Chemistry · doi:10.1021/bc8003167 · Cited by 120
Thermosensitive hexanoyl glycol chitosan-based ocular delivery system for glaucoma therapy
Cho, I. S., Park, C. G., Huh, B. K., Cho, M. O., Khatun, Z., Li, Z., Kang, S.-W., Choy, Y. B., & Huh, K. M. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.05.011 · Cited by 106
Loh, X. J., Guerin, W., & Guillaume, S. M. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm33777k · Cited by 105
Loh, X. J., Goh, S. H., & Li, J. (2009) · The Journal of Physical Chemistry B · doi:10.1021/jp903984r · Cited by 101
Long-term biostability of self-assembling protein polymers in the absence of covalent crosslinking
Sallach, R. E., Cui, W., Balderrama, F., Martinez, A. W., Wen, J., Haller, C. A., Taylor, J. V., Wright, E., Long, R. C., & Chaikof, E. L. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.09.082 · Cited by 98
Biodegradable thermoreversible gelling PLGA-g-PEG copolymers
Jeong, B., Wang, L.-Q., & Gutowska, A. (2001) · Chemical Communications · doi:10.1039/b102819g · Cited by 87
Self-citationA novel thermosensitive polymer with pH-dependent degradation for drug delivery
Garripelli, V. K., Kim, J.-K., Namgung, R., Kim, W., Repka, M. A., & Jo, S. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.07.005 · Cited by 95
Yeon, B., Park, M. H., Moon, H. J., Kim, S.-J., Cheon, Y. W., & Jeong, B. (2013) · Biomacromolecules · doi:10.1021/bm400868j · Cited by 92
Self-citationYang, L., Zhao, Z., Wei, J., Ghzaoui, A. E., & Li, S. (2007) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2007.05.074 · Cited by 91
Chang, G., Yu, L., Yang, Z., & Ding, J. (2009) · Polymer · doi:10.1016/j.polymer.2009.10.036 · Cited by 87
Gong, C. Y., Dong, P. W., Shi, S., Fu, S., Yang, J. L., Guo, G. F., Zhao, X., Wei, Y., & Qian, Z. Y. (2009) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.21694 · Cited by 86
Sun, K., & Raghavan, S. R. (2010) · Langmuir · doi:10.1021/la904907b · Cited by 80
Zhang, J., Li, Q., Zhu, K. J., & Jin, Y. (2004) · Macromolecular Rapid Communications · doi:10.1002/marc.200400180 · Cited by 78
In situ forming acyl-capped PCLA–PEG–PCLA triblock copolymer based hydrogels
Sandker, M. J., Petit, A., Redout, E. M., Siebelt, M., Müller, B. M., de Bruin, P., Meyboom, R., Vermonden, T., Hennink, W. E., & Weinans, H. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2013.07.046 · Cited by 77
Engineering Bioresponsive Hydrogels toward Healthcare Applications
Wu, Y., Chen, X., Wang, W., & Loh, X. J. (2015) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201500172 · Cited by 76
Micro- to Nanoscale Structure of Biocompatible PLA−PEO−PLA Hydrogels
Agrawal, S. K., Sanabria-DeLong, N., Jemian, P. R., Tew, G. N., & Bhatia, S. R. (2007) · Langmuir · doi:10.1021/la063390x · Cited by 75
Engineering of Functional Skeletal Tissues
Bronner, F., Mikos, A. G., & Farach‐Carson, M. C. (2007) · Springer eBooks · doi:10.1007/978-1-84628-366-6 · Cited by 71
Emerging trends in Poly(lactic-co-glycolic) acid bionanoarchitectures and applications
Idumah, C. I. (2022) · Cleaner Materials · doi:10.1016/j.clema.2022.100102 · Cited by 70
Tang, R., Ji, W., & Wang, C. (2010) · Macromolecular Bioscience · doi:10.1002/mabi.200900229 · Cited by 62
Branched polyesters: Preparative strategies and applications
d’Arcy, R., Burke, J., & Tirelli, N. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.05.005 · Cited by 62
Schacht, E. H., Toncheva, V. D., Vandertaelen, K., & Heller, J. (2006) · Journal of Controlled Release · doi:10.1016/j.jconrel.2006.07.026 · Cited by 61
Surface-initiated, ring-opening polymerization of p-dioxanone from gold and silicon oxide surfaces
Yoon, K. R., Chi, Y. S., Lee, K., Lee, J. K., Kim, D. J., Koh, Y., Joo, S., Yun, W. S., & Choi, I. S. (2003) · Journal of Materials Chemistry · doi:10.1039/b305903k · Cited by 61
Cotton-based health care textile: a mini review
Shahriari‐Khalaji, M., Alassod, A., & Nozhat, Z. (2022) · Polymer Bulletin · doi:10.1007/s00289-021-04015-y · Cited by 60
Nagahama, K., Fujiura, K., Enami, S., Ouchi, T., & Ohya, Y. (2008) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.22943 · Cited by 59
Thermoresponsive polymers as gene and drug delivery vectors: architecture and mechanism of action
Calejo, M. T., Sande, S. A., & Nyström, B. (2013) · Expert Opinion on Drug Delivery · doi:10.1517/17425247.2013.846906 · Cited by 59
Smart hydrogel-functionalized textile system with moisture management property for skin application
Wang, X., Hu, H., Yang, Z., He, L., Kong, Y., Fei, B., & Xin, J. H. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/12/125027 · Cited by 58
PCL-based thermo-gelling polymers for in vivo delivery of chemotherapeutics to tumors
Zheng, C., Gao, H., Yang, D., Liu, M., Cheng, H., Wu, Y., & Loh, X. J. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.02.005 · Cited by 54
D’Addio, S. M., Kafka, C., Akbulut, M. E. S., Beattie, P. D., Saad, W., Herrera, M., Kennedy, M. T., & Prud’homme, R. K. (2010) · Molecular Pharmaceutics · doi:10.1021/mp900260q · Cited by 52
Petit, A., Müller, B. M., de Bruin, P., Meyboom, R., Piest, M., Kroon-Batenburg, L. M. J., de Leede, L. G. J., Hennink, W. E., & Vermonden, T. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.07.044 · Cited by 50
HYDROGELS AS A DRUG DELIVERY SYSTEM AND APPLICATIONS: A REVIEW Review Article
Kalshetti, P., Rajendra, V. B., Dixit, D. N., & Parekh, P. P. (2012) · Cited by 50
Nagahama, K., Takahashi, A., & Ohya, Y. (2012) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2012.11.003 · Cited by 46
Slow eroding biodegradable multiblock poloxamer copolymers
Ahn, J. S., Suh, J. M., Lee, M., & Jeong, B. (2005) · Polymer International · doi:10.1002/pi.1780 · Cited by 43
Self-citationReverse Thermal Gelation of Aliphatically Modified Biodegradable Triblock Copolymers
Jo, S., Kim, J., & Kim, S. W. (2006) · Macromolecular Bioscience · doi:10.1002/mabi.200600127 · Cited by 43
Biodegradable ‘intelligent’ materials in response to chemical stimuli for biomedical applications
Ju, X., Xie, R., Yang, L., & Chu, L. (2009) · Expert Opinion on Therapeutic Patents · doi:10.1517/13543770902769617 · Cited by 43
Synthesis of four‐armed poly(ε‐caprolactone)‐ block ‐poly(ethylene oxide) by diethylzinc catalyst
Deng, M., Chen, X., Piao, L., Zhang, X., Dai, Z., & Jing, X. (2004) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.11052 · Cited by 41
Cho, I. S., Oh, H. M., Cho, M. O., Jang, B. S., Cho, J.-K., Park, K. H., Kang, S., & Huh, K. M. (2018) · Biomaterials Research · doi:10.1186/s40824-018-0137-7 · Cited by 40
Theerasilp, M., & Nasongkla, N. (2012) · Journal of Microencapsulation · doi:10.3109/02652048.2012.746746 · Cited by 37
A Review on Synthesis Methods of Phyllosilicate- and Graphene-Filled Composite Hydrogels
Ganguly, S., & Margel, S. (2022) · Journal of Composites Science · doi:10.3390/jcs6010015 · Cited by 37
Thermosensitive phase behavior and drug release of in situ N-isopropylacrylamide copolymer
Chen, S., Zhong, H., Gu, B., Wang, Y., Li, X.-M., Cheng, Z., Zhang, L., & Yao, C. (2012) · Materials Science and Engineering C · doi:10.1016/j.msec.2012.05.052 · Cited by 35
Jafari, M., Doustdar, F., & Mehrnejad, F. (2018) · Journal of Chemical Information and Modeling · doi:10.1021/acs.jcim.8b00641 · Cited by 35
Heller, J., & Barr, J. (2005) · Expert Opinion on Drug Delivery · doi:10.1517/17425247.2.1.169 · Cited by 35
Nagahama, K., Imai, Y., Nakayama, T., Ohmura, J., Ouchi, T., & Ohya, Y. (2009) · Polymer · doi:10.1016/j.polymer.2009.05.045 · Cited by 34
Stabilization of pluronic gels in the presence of different polysaccharides
Kjøniksen, A., Calejo, M. T., Zhu, K., Nyström, B., & Sande, S. A. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.40465 · Cited by 34
Stimuli-responsive Carriers for Controlled Intracellular Drug Release
Sheng, Y., Hu, J., Shi, J., & Lee, L. J. (2019) · Current Medicinal Chemistry · doi:10.2174/0929867324666170830102409 · Cited by 33
Khiabani, S. S., Aghazadeh, M., Rakhtshah, J., & Davaran, S. (2021) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2021.112035 · Cited by 33
Mao, H., Wang, C., Chang, X., Cao, H., Shan, G., Bao, Y., & Pan, P. (2017) · Materials Chemistry Frontiers · doi:10.1039/c7qm00502d · Cited by 33
Biodegradable ‘intelligent’ materials in response to physical stimuli for biomedical applications
Ju, X., Xie, R., Yang, L., & Chu, L. (2009) · Expert Opinion on Therapeutic Patents · doi:10.1517/13543770902771282 · Cited by 33
Tetronic-oligolactide-heparin hydrogel as a multi-functional scaffold for tissue regeneration.
Go, D. H., Joung, Y., Lee, S.-Y., Lee, M., & Park, K. (2008) · Macromolecular Bioscience · doi:10.1002/mabi.200800098 · Cited by 30
Kumar, R., Kulkarni, A., Nabulsi, J., Nagesha, D. K., Cormack, R. A., Makrigiorgos, M. G., & Sridhar, S. (2013) · Drug Delivery and Translational Research · doi:10.1007/s13346-012-0124-9 · Cited by 31
Synthesis, characterization and drug delivery behaviors of new PCP polymeric micelles
Liu, D.-Z., Hsieh, J.-H., Fan, X.-C., Yang, J.-D., & Chung, T. (2006) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2006.10.019 · Cited by 31
Tarasevich, B. J., Gutowska, A., Li, X. S., & Jeong, B. (2008) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32025 · Cited by 30
Self-citationSharma, A., Mittal, P., Yadav, A., Mishra, A. K., Hazari, P. P., & Sharma, R. K. (2022) · ACS Applied Bio Materials · doi:10.1021/acsabm.1c01078 · Cited by 29
Asadzadeh, H., & Moosavi, A. (2019) · Materials Research Express · doi:10.1088/2053-1591/ab06d3 · Cited by 29
Jiang, Z., You, Y., Gu, Q., Hao, J., & Deng, X. (2008) · Macromolecular Rapid Communications · doi:10.1002/marc.200800186 · Cited by 29
Metadata
- Authors
- Jeong, B., Kibbey, M. R., Birnbaum, J. C., Won, Y.-Y., & Gutowska, A.
- Affiliations
- University of Minnesota (US)
- Corresponding author
- Gutowska, Anna
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2000-10-01
- Volume
- 33
- Issue
- 22
- Pages
- 8317-8322
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2011227657
- Cited by
- 193
- References
- 20
- Citations by year
- 2026: 7 · 2025: 2 · 2024: 2 · 2023: 5 · 2022: 8 · 2021: 4 · 2020: 5 · 2019: 8 · 2018: 5 · 2017: 4 · 2016: 5 · 2015: 6 · 2014: 18 · 2013: 8 · 2012: 16
- FWCI
- 2.72
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Macromolecules (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Physical Sciences › Materials Science › Biomaterials › Supramolecular Self-Assembly in Materials
- Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Surfactants and Colloidal Systems
- Keywords
- thermosensitive hydrogel, sol-gel transition, critical micelle concentration, micelles, hydrogel degradation, mechanical properties, molecular motion
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.