The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Strong Sulfur Binding with Conducting Magnéli-Phase TinO2 n–1 Nanomaterials for Improving Lithium–Sulfur Batteries
Abstract
Lithium-sulfur batteries show fascinating potential for advanced energy storage systems due to their high specific capacity, low-cost, and environmental benignity. However, the shuttle effect and the uncontrollable deposition of lithium sulfide species result in poor cycling performance and low Coulombic efficiency. Despite the recent success in trapping soluble polysulfides via porous matrix and chemical binding, the important mechanism of such controllable deposition of sulfur species has not been well understood. Herein, we discovered that conductive Magnéli phase Ti4O7 is highly effective matrix to bind with sulfur species. Compared with the TiO2-S, the Ti4O7-S cathodes exhibit higher reversible capacity and improved cycling performance. It delivers high specific capacities at various C-rates (1342, 1044, and 623 mAh g(-1) at 0.02, 0.1, and 0.5 C, respectively) and remarkable capacity retention of 99% (100 cycles at 0.1 C). The superior properties of Ti4O7-S are attributed to the strong adsorption of sulfur species on the low-coordinated Ti sites of Ti4O7 as revealed by density functional theory calculations and confirmed through experimental characterizations. Our study demonstrates the importance of surface coordination environment for strongly influencing the S-species binding. These findings can be also applicable to numerous other metal oxide materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
The surface science of titanium dioxide
Diebold, U. (2003) · Surface Science Reports · doi:10.1016/s0167-5729(02)00100-0 · Cited by 7,944
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Challenges and Prospects of Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., & Su, Y.-S. (2013) · Accounts of Chemical Research · doi:10.1021/ar300179v · Cited by 2,380
Wang, H., Yang, Y., Liang, Y., Robinson, J. T., Li, Y., Jackson, A., Cui, Y., & Dai, H. (2011) · Nano Letters · doi:10.1021/nl200658a · Cited by 2,119
Self-citationPolysulfide Shuttle Study in the Li/S Battery System
Mikhaylik, Y. V., & Akridge, J. R. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1806394 · Cited by 2,115
Wei Seh, Z., Li, W., Cha, J. J., Zheng, G., Yang, Y., McDowell, M. T., Hsu, P.-C., & Cui, Y. (2013) · Nature Communications · doi:10.1038/ncomms2327 · Cited by 2,107
Self-citationNanostructured sulfur cathodes
Yang, Y., Zheng, G., & Cui, Y. (2013) · Chemical Society Reviews · doi:10.1039/c2cs35256g · Cited by 1,947
Self-citationGraphene Oxide as a Sulfur Immobilizer in High Performance Lithium/Sulfur Cells
Ji, L., Rao, M., Zheng, H., Zhang, L., Li, Y., Duan, W., Guo, J., Cairns, E. J., & Zhang, Y. (2011) · Journal of the American Chemical Society · doi:10.1021/ja206955k · Cited by 1,505
Lithium–sulphur batteries with a microporous carbon paper as a bifunctional interlayer
Su, Y.-S., & Manthiram, A. (2012) · Nature Communications · doi:10.1038/ncomms2163 · Cited by 1,458
Cited by
Designing high-energy lithium–sulfur batteries
Seh, Z. W., Sun, Y., Zhang, Q., & Cui, Y. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00410a · Cited by 2,573
Self-citationReview on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Lithium–Sulfur Batteries: Progress and Prospects
Manthiram, A., Chung, S., & Zu, C. (2015) · Advanced Materials · doi:10.1002/adma.201405115 · Cited by 1,620
Nanostructured Metal Oxides and Sulfides for Lithium–Sulfur Batteries
Liu, X., Huang, J., Zhang, Q., & Mai, L. (2017) · Advanced Materials · doi:10.1002/adma.201601759 · Cited by 1,616
Powering Lithium–Sulfur Battery Performance by Propelling Polysulfide Redox at Sulfiphilic Hosts
Yuan, Z., Peng, H.-J., Hou, T.-Z., Huang, J.-Q., Chen, C.-M., Wang, D.-W., Cheng, X.-B., Wei, F., & Zhang, Q. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04166 · Cited by 1,438
Mechanism and Kinetics of Li2S Precipitation in Lithium–Sulfur Batteries
Fan, F. Y., Carter, W. C., & Chiang, Y. (2015) · Advanced Materials · doi:10.1002/adma.201501559 · Cited by 987
Advances in Lithium–Sulfur Batteries: From Academic Research to Commercial Viability
Chen, Y., Wang, T., Tian, H., Su, D., Zhang, Q., & Wang, G. (2021) · Advanced Materials · doi:10.1002/adma.202003666 · Cited by 870
Li, Z., Zhang, J., & Lou, X. W. (. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201506972 · Cited by 841
Wei, Q., Xiong, F., Tan, S., Huang, L., Lan, E. H., Dunn, B., & Mai, L. (2017) · Advanced Materials · doi:10.1002/adma.201602300 · Cited by 802
A sulfur host based on titanium monoxide@carbon hollow spheres for advanced lithium–sulfur batteries
Li, Z., Zhang, J., Guan, B., Wang, D., Liu, L.-M., & Lou, X. W. (2016) · Nature Communications · doi:10.1038/ncomms13065 · Cited by 677
Lithium–Sulfur Batteries under Lean Electrolyte Conditions: Challenges and Opportunities
Zhao, M., Li, B., Peng, H., Yuan, H., Wei, J., & Huang, J. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201909339 · Cited by 663
Li, Z., Wu, H. B., & (David) Lou, X. W. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02364a · Cited by 654
Enhanced Electrochemical Kinetics on Conductive Polar Mediators for Lithium–Sulfur Batteries
Peng, H., Zhang, G., Chen, X., Zhang, Z., Xu, W., Huang, J., & Zhang, Q. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201605676 · Cited by 649
Current Status and Future Prospects of Metal–Sulfur Batteries
Chung, S., & Manthiram, A. (2019) · Advanced Materials · doi:10.1002/adma.201901125 · Cited by 622
Carbon materials for Li–S batteries: Functional evolution and performance improvement
Liang, J., Sun, Z.-H., Li, F., & Cheng, H.-M. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2015.09.007 · Cited by 593
Xue, W., Shi, Z., Suo, L., Wang, C., Wang, Z., Wang, H., So, K. P., Maurano, A., Yu, D., Chen, Y., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0351-0 · Cited by 591
A Cooperative Interface for Highly Efficient Lithium–Sulfur Batteries
Peng, H., Zhang, Z., Huang, J., Zhang, G., Xie, J., Xu, W., Shi, J., Chen, X., Cheng, X., & Zhang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201603401 · Cited by 583
Zhang, J., Hu, H., Li, Z., & Lou, X. W. (. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201511632 · Cited by 560
Redox-Active Polymers for Energy Storage Nanoarchitectonics
Kim, J., Kim, J. H., & Ariga, K. (2017) · Joule · doi:10.1016/j.joule.2017.08.018 · Cited by 549
Entrapment of Polysulfides by a Black‐Phosphorus‐Modified Separator for Lithium–Sulfur Batteries
Sun, J., Sun, Y., Pasta, M., Zhou, G., Li, Y., Liu, W., Xiong, F., & Cui, Y. (2016) · Advanced Materials · doi:10.1002/adma.201602172 · Cited by 516
Self-citationNanostructured energy materials for electrochemical energy conversion and storage: A review
Zhang, X., Cheng, X., & Zhang, Q. (2016) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2016.11.003 · Cited by 516
Paper‐Based Electrodes for Flexible Energy Storage Devices
Yao, B., Zhang, J., Kou, T., Song, Y., Liu, T., & Li, Y. (2017) · Advanced Science · doi:10.1002/advs.201700107 · Cited by 464
Nanowires for Electrochemical Energy Storage
Zhou, G., Xu, L., Hu, G., Mai, L., & Cui, Y. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00326 · Cited by 439
Self-citationRational Design of Nanostructured Functional Interlayer/Separator for Advanced Li–S Batteries
Jeong, Y. C., Kim, J. H., Nam, S., Park, C. R., & Yang, S. J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707411 · Cited by 429
Kim, H., Lee, J., Ahn, H., Kim, O., & Park, M. J. (2015) · Nature Communications · doi:10.1038/ncomms8278 · Cited by 428
Pang, Q., & Nazar, L. F. (2016) · ACS Nano · doi:10.1021/acsnano.5b07347 · Cited by 411
Progress Towards Commercially Viable Li–S Battery Cells
Urbonaite, S., Poux, T., & Novák, P. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500118 · Cited by 406
Multifunctional Co3S4@sulfur nanotubes for enhanced lithium-sulfur battery performance
Pu, J., Shen, Z., Zheng, J., Wu, W., Zhu, C., Zhou, Q., Zhang, H., & Pan, F. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.05.009 · Cited by 369
Zhang, Z., Peng, H., Zhao, M., & Huang, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707536 · Cited by 357
Chu, H., Noh, H., Kim, Y.-J., Yuk, S., Lee, J.-H., Lee, J., Kwack, H., Kim, Y., Yang, D.-K., & Kim, H.-T. (2019) · Nature Communications · doi:10.1038/s41467-018-07975-4 · Cited by 353
A Revolution in Electrodes: Recent Progress in Rechargeable Lithium–Sulfur Batteries
Fang, X., & Peng, H. (2015) · Small · doi:10.1002/smll.201402354 · Cited by 346
Chen, T., Ma, L., Cheng, B., Chen, R., Hu, Y., Zhu, G., Wang, Y., Liang, J., Tie, Z., Liu, J., et al. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.05.064 · Cited by 334
Status and Prospects of MXene‐Based Lithium–Sulfur Batteries
Zhao, Q., Zhu, Q., Liu, Y., & Xu, B. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202100457 · Cited by 334
Pang, Q., Liang, X., Kwok, C. Y., & Nazar, L. F. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0171514jes · Cited by 323
Design of Complex Nanomaterials for Energy Storage: Past Success and Future Opportunity
Liu, Y., Zhou, G., Liu, K., & Cui, Y. (2017) · Accounts of Chemical Research · doi:10.1021/acs.accounts.7b00450 · Cited by 323
Self-citationXu, N., Qian, T., Liu, X., Liu, J., Chen, Y., & Yan, C. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04610 · Cited by 319
Yao, W., Xu, J., Ma, L., Lu, X., Luo, D., Qian, J., Zhan, L., Manke, I., Yang, C., Adelhelm, P., et al. (2023) · Advanced Materials · doi:10.1002/adma.202212116 · Cited by 317
Zhou, F., Li, Z., Luo, X., Wu, T., Jiang, B., Lu, L.-L., Yao, H.-B., Antonietti, M., & Yu, S.-H. (2018) · Nano Letters · doi:10.1021/acs.nanolett.7b04505 · Cited by 316
Wang, Y., Zhang, R., Pang, Y.-C., Chen, X., Lang, J., Xu, J., Xiao, C., Li, H., Xi, K., & Ding, S. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.05.019 · Cited by 312
Cathode materials for lithium–sulfur batteries: a practical perspective
Eftekhari, A., & Kim, D.-W. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00799j · Cited by 285
Three-Dimensional Growth of Li2S in Lithium–Sulfur Batteries Promoted by a Redox Mediator
Gerber, L. C. H., Frischmann, P. D., Fan, F. Y., Doris, S. E., Qu, X., Scheuermann, A. M., Persson, K., Chiang, Y.-M., & Helms, B. A. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04189 · Cited by 255
Metadata
- Authors
- Tao, X., Wang, J., Ying, Z., Cai, Q., Zheng, G., Gan, Y., Huang, H., Xia, Y., Liang, C., Zhang, W., & Cui, Y.
- Venue
- Nano Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-08-06
- Volume
- 14
- Issue
- 9
- Pages
- 5288-5294
- ISSN
- 1530-6984 (ISSN-L)
- 1530-6992
- OpenAlex
- W2314555399
- Cited by
- 687
- References
- 37
- FWCI
- 43.51
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.