The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Three-dimensional porous carbon composites containing high sulfur nanoparticle content for high-performance lithium–sulfur batteries
Open accessAbstract
Sulfur is a promising cathode material for lithium–sulfur batteries because of its high theoretical capacity (1,675 mA h g−1); however, its low electrical conductivity and the instability of sulfur-based electrodes limit its practical application. Here we report a facile in situ method for preparing three-dimensional porous graphitic carbon composites containing sulfur nanoparticles (3D S@PGC). With this strategy, the sulfur content of the composites can be tuned to a high level (up to 90 wt%). Because of the high sulfur content, the nanoscale distribution of the sulfur particles, and the covalent bonding between the sulfur and the PGC, the developed 3D S@PGC cathodes exhibit excellent performance, with a high sulfur utilization, high specific capacity (1,382, 1,242 and 1,115 mA h g−1 at 0.5, 1 and 2 C, respectively), long cycling life (small capacity decay of 0.039% per cycle over 1,000 cycles at 2 C) and excellent rate capability at a high charge/discharge current.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Wang, Z., Dong, Y., Li, H., Zhao, Z., Bin Wu, H., Hao, C., Liu, S., Qiu, J., & Lou, X. W. (2014) · Nature Communications · doi:10.1038/ncomms6002 · Cited by 1,059
Cited by
More Reliable Lithium‐Sulfur Batteries: Status, Solutions and Prospects
Fang, R., Zhao, S., Sun, Z., Wang, D., Cheng, H., & Li, F. (2017) · Advanced Materials · doi:10.1002/adma.201606823 · Cited by 1,785
Du, Z., Chen, X., Hu, W., Chuang, C., Xie, S., Hu, A., Yan, W., Kong, X., Wu, X., Ji, H., et al. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.8b12973 · Cited by 1,490
Mesoporous materials for energy conversion and storage devices
Li, W., Liu, J., & Zhao, D. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.23 · Cited by 1,388
Electrode Degradation in Lithium-Ion Batteries
Pender, J. P., Jha, G., Youn, D. H., Ziegler, J. M., Andoni, I., Choi, E. J., Heller, A., Dunn, B. S., Weiss, P. S., Penner, R. M., et al. (2020) · ACS Nano · doi:10.1021/acsnano.9b04365 · Cited by 873
2D MoS2 as an efficient protective layer for lithium metal anodes in high-performance Li–S batteries
Cha, E., Patel, M. D., Park, J., Hwang, J., Prasad, V., Cho, K., & Choi, W. (2018) · Nature Nanotechnology · doi:10.1038/s41565-018-0061-y · Cited by 767
Feng, X., Bai, Y., Liu, M., Li, Y., Yang, H., Wang, X., & Wu, C. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00166c · Cited by 761
Porous Carbons: Structure‐Oriented Design and Versatile Applications
Tian, W., Zhang, H., Duan, X., Sun, H., Shao, G., & Wang, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909265 · Cited by 657
Current Status and Future Prospects of Metal–Sulfur Batteries
Chung, S., & Manthiram, A. (2019) · Advanced Materials · doi:10.1002/adma.201901125 · Cited by 622
Applications of Phosphorene and Black Phosphorus in Energy Conversion and Storage Devices
Pang, J., Bachmatiuk, A., Yin, Y., Trzebicka, B., Zhao, L., Fu, L., Mendes, R. G., Gemming, T., Liu, Z., & Rummeli, M. H. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702093 · Cited by 518
Mao, Y., Li, G., Guo, Y., Li, Z., Liang, C., Peng, X., & Lin, Z. (2017) · Nature Communications · doi:10.1038/ncomms14628 · Cited by 518
Self-citationHost Materials Anchoring Polysulfides in Li–S Batteries Reviewed
Zhou, L., Danilov, D. L., Eichel, R., & Notten, P. H. L. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202001304 · Cited by 516
Production and processing of graphene and related materials
Backes, C., Abdelkader, A. M., Alonso, C., Andrieux-Ledier, A., Arenal, R., Azpeitia, J., Balakrishnan, N., Banszerus, L., Barjon, J., Bartali, R., et al. (2020) · 2D Materials · doi:10.1088/2053-1583/ab1e0a · Cited by 501
3D MXene Architectures for Efficient Energy Storage and Conversion
Li, K., Liang, M., Wang, H., Wang, X., Huang, Y., Coelho, J., Pinilla, S., Zhang, Y., Qi, F., Nicolosi, V., et al. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000842 · Cited by 498
Self-citationGriebel, J. J., Glass, R. S., Char, K., & Pyun, J. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.04.003 · Cited by 446
Zhong, Y., Chao, D., Deng, S., Zhan, J., Fang, R., Xia, Y., Wang, Y., Wang, X., Xia, X., & Tu, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201706391 · Cited by 428
A Comprehensive Understanding of Lithium–Sulfur Battery Technology
Li, T., Bai, X., Gulzar, U., Bai, Y., Capiglia, C., Deng, W., Zhou, X., Liu, Z., Feng, Z., & Proietti Zaccaria, R. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201901730 · Cited by 422
Zhang, B.-W., Sheng, T., Liu, Y.-D., Wang, Y.-X., Zhang, L., Lai, W.-H., Wang, L., Yang, J., Gu, Q.-F., Chou, S.-L., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-06144-x · Cited by 414
Structural Design of Lithium–Sulfur Batteries: From Fundamental Research to Practical Application
Yang, X., Li, X., Adair, K., Zhang, H., & Sun, X. (2018) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0010-3 · Cited by 411
Li-S Batteries: Challenges, Achievements and Opportunities
Raza, H., Bai, S., Cheng, J., Majumder, S., Zhu, H., Liu, Q., Zheng, G., Li, X., & Chen, G. (2023) · Electrochemical Energy Reviews · doi:10.1007/s41918-023-00188-4 · Cited by 406
A review of recent developments in rechargeable lithium–sulfur batteries
Kang, W., Deng, N., Ju, J., Li, Q., Wu, D., Ma, X., Li, L., Naebe, M., & Cheng, B. (2016) · Nanoscale · doi:10.1039/c6nr04923k · Cited by 391
Shen, L., Lv, H., Chen, S., Kopold, P., van Aken, P. A., Wu, X., Maier, J., & Yu, Y. (2017) · Advanced Materials · doi:10.1002/adma.201700142 · Cited by 382
Interfacial Assembly and Applications of Functional Mesoporous Materials
Duan, L., Wang, C., Zhang, W., Ma, B., Deng, Y., Li, W., & Zhao, D. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00236 · Cited by 368
Wang, X., Li, G., Li, J., Zhang, Y., Wook, A., Yu, A., & Chen, Z. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00194g · Cited by 360
Self-citationChu, H., Noh, H., Kim, Y.-J., Yuk, S., Lee, J.-H., Lee, J., Kwack, H., Kim, Y., Yang, D.-K., & Kim, H.-T. (2019) · Nature Communications · doi:10.1038/s41467-018-07975-4 · Cited by 353
A Review of Heteroatom Doped Materials for Advanced Lithium–Sulfur Batteries
Wang, J., & Han, W. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202107166 · Cited by 351
Li, Z., He, Q., Xu, X., Zhao, Y., Liu, X., Zhou, C., Ai, D., Xia, L., & Mai, L. (2018) · Advanced Materials · doi:10.1002/adma.201804089 · Cited by 338
Biomass-based materials for green lithium secondary batteries
Jin, C., Nai, J., Sheng, O., Yuan, H., Zhang, W., Tao, X., & Lou, X. W. (. (2021) · Energy & Environmental Science · doi:10.1039/d0ee02848g · Cited by 324
Li, G., Gao, Y., He, X., Huang, Q., Chen, S., Kim, S. H., & Wang, D. (2017) · Nature Communications · doi:10.1038/s41467-017-00974-x · Cited by 314
Self-citationWang, W., Cao, Z., Elia, G. A., Wu, Y., Wahyudi, W., Abou-Hamad, E., Emwas, A.-H., Cavallo, L., Li, L.-J., & Ming, J. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b01945 · Cited by 312
Wang, Z., Shen, J., Liu, J., Xu, X., Liu, Z., Hu, R., Yang, L., Feng, Y., Liu, J., Shi, Z., et al. (2019) · Advanced Materials · doi:10.1002/adma.201902228 · Cited by 309
Huang, S., Lim, Y. V., Zhang, X., Wang, Y., Zheng, Y., Kong, D., Ding, M., Yang, S. A., & Yang, H. Y. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.06.052 · Cited by 303
Rana, M., Ahad, S. A., Li, M., Luo, B., Wang, L., Gentle, I., & Knibbe, R. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.12.024 · Cited by 301
Xiao, Z., Li, Z., Li, P., Meng, X., & Wang, R. (2019) · ACS Nano · doi:10.1021/acsnano.9b00177 · Cited by 300
Cathode materials for lithium–sulfur batteries: a practical perspective
Eftekhari, A., & Kim, D.-W. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00799j · Cited by 285
Engineering Hollow Carbon Architecture for High-Performance K-Ion Battery Anode
Bin, D.-S., Lin, X.-J., Sun, Y.-G., Xu, Y.-S., Zhang, K., Cao, A.-M., & Wan, L.-J. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b02178 · Cited by 284
Li, G., Wang, X., Seo, M. H., Li, M., Ma, L., Yuan, Y., Wu, T., Yu, A., Wang, S., Lu, J., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-03116-z · Cited by 267
Self-citationChen, Y., Zhang, W., Zhou, D., Tian, H., Su, D., Wang, C., Stockdale, D., Kang, F., Li, B., & Wang, G. (2019) · ACS Nano · doi:10.1021/acsnano.9b01079 · Cited by 257
Recent research trends in Li–S batteries
Kumar, R., Liu, J., Hwang, J.-Y., & Sun, Y.-K. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta01483c · Cited by 254
MoS 2 /MoO x ‐Nanostructure‐Decorated Activated Carbon Cloth for Enhanced Supercapacitor Performance
Sari, F. N. I., & Ting, J. (2018) · ChemSusChem · doi:10.1002/cssc.201702295 · Cited by 95
Yang, M.-T., Tong, W.-C., Lee, J., Kwon, E., & Lin, K.-Y. A. (2019) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2019.02.090 · Cited by 41
Wang, C., Huang, J., Li, J., Cao, L., & Kajiyoshi, K. (2022) · Applied Surface Science · doi:10.1016/j.apsusc.2022.152620 · Cited by 40
Ehsan, M. A., Khalafallah, D., Zhi, M., & Hong, Z. (2021) · Journal of Porous Materials · doi:10.1007/s10934-020-00955-4 · Cited by 7
Zhong, M., Sun, J., Shu, X., Guan, J., Tong, G., Ding, H., Chen, L., Zhou, N., & Shuai, Y. (2022) · Nanotechnology · doi:10.1088/1361-6528/ac5286 · Cited by 6
Self-citation
Metadata
- Authors
- Li, G., Sun, J., Hou, W., Jiang, S., Huang, Y., & Geng, J.
- Venue
- Nature Communications
- Published
- 2016-02-01
- Volume
- 7
- Issue
- 1
- Pages
- 10601-10601
- ISSN
- 2041-1723 (ISSN-L)
- OpenAlex
- W2270589204
- Cited by
- 806
- References
- 2
- FWCI
- 60.22
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.