Thermal properties of graphene and nanostructured carbon materials
Open accessThe DOI matches its Crossref record; 162 of the 164 references it cites were found in a registry or an index.
Abstract
Recent years have seen a rapid growth of interest by the scientific and engineering communities in the thermal properties of materials. Heat removal has become a crucial issue for continuing progress in the electronic industry, and thermal conduction in low-dimensional structures has revealed truly intriguing features. Carbon allotropes and their derivatives occupy a unique place in terms of their ability to conduct heat. The room-temperature thermal conductivity of carbon materials span an extraordinary large range--of over five orders of magnitude--from the lowest in amorphous carbons to the highest in graphene and carbon nanotubes. Here, I review the thermal properties of carbon materials focusing on recent results for graphene, carbon nanotubes and nanostructured carbon materials with different degrees of disorder. Special attention is given to the unusual size dependence of heat conduction in two-dimensional crystals and, specifically, in graphene. I also describe the prospects of applications of graphene and carbon materials for thermal management of electronics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“More attractively, in the longitudinal direction, single‐walled carbon nanotubes (SWCNTs) have an extremely high thermal conductivity of ≈3500 W mK−1 and multiwalled carbon nanotubes (MWCNTs) have a thermal conductivity of ≈3000 W mK−1.[ 66 ]”
From Carbon-Based Composite Phase Change Materials for Thermal Energy Storage, Transfer, and Conversion (2021) · cites this paper as [66]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electric Field Effect in Atomically Thin Carbon Films
Novoselov, K. S., Geim, A. K., Morozov, S. V., Jiang, D., Zhang, Y., Dubonos, S. V., Grigorieva, I. V., & Firsov, A. A. (2004) · Science · doi:10.1126/science.1102896 · Cited by 66,834 · cited 1×
“s), K≈3000 – 3500 W/mK at RT [10, 11], exceeds that of diamond, which is the best bulk heat conductor. Alexander A. Balandin, University of California - Riverside (2011) 3 The exfoliation of graphene [12] and discovery of its exotic electrical conduction [13, 14, 15] made possible, among other things, the first experi…”
BackgroundGeim, A. K., & Novoselov, K. S. (2007) · Nature Materials · doi:10.1038/nmat1849 · Cited by 39,979 · cited 2×
“compared to their natural abundance [145- 146]. The isotope effects in graphene have been considered only computationally [83, 147] and await experimental investigation. Finally, the rise of graphene [13] renewed interest to other carbon allotropes including their prospects for thermal management [55]. The use of comp…”
BackgroundTwo-dimensional gas of massless Dirac fermions in graphene
Novoselov, K. S., Geim, A. K., Morozov, S. V., Jiang, D., Katsnelson, M. I., Grigorieva, I. V., Dubonos, S. V., & Firsov, A. A. (2005) · Nature · doi:10.1038/nature04233 · Cited by 21,611 · cited 1×
“diamond, which is the best bulk heat conductor. Alexander A. Balandin, University of California - Riverside (2011) 3 The exfoliation of graphene [12] and discovery of its exotic electrical conduction [13, 14, 15] made possible, among other things, the first experimental study of heat transport in the strictly 2D cryst…”
BackgroundSuperior Thermal Conductivity of Single-Layer Graphene
Balandin, A. A., Ghosh, S., Bao, W., Calizo, I., Teweldebrhan, D., Miao, F., & Lau, C. N. (2008) · Nano Letters · doi:10.1021/nl0731872 · Cited by 13,823 · cited 5×
“apted from ref. (20). Alexander A. Balandin, University of California - Riverside (2011) 25 Appendix II: Unique Features of Heat Conduction in 2D Crystals Investigation of heat conduction in graphene [16, 17] and CNTs [8] raised the issue of ambiguity in definition of the intrinsic thermal conductivity for 2D and 1D c…”
BackgroundMethodInfluentialSelf-citationExperimental observation of the quantum Hall effect and Berry's phase in graphene
Zhang, Y., Tan, Y.-W., Stormer, H. L., & Kim, P. (2005) · Nature · doi:10.1038/nature04235 · Cited by 13,435 · cited 1×
“diamond, which is the best bulk heat conductor. Alexander A. Balandin, University of California - Riverside (2011) 3 The exfoliation of graphene [12] and discovery of its exotic electrical conduction [13, 14, 15] made possible, among other things, the first experimental study of heat transport in the strictly 2D cryst…”
BackgroundLarge-Area Synthesis of High-Quality and Uniform Graphene Films on Copper Foils
Li, X., Cai, W., An, J., Kim, S., Nah, J., Yang, D., Piner, R., Velamakanni, A., Jung, I., Tutuc, E., et al. (2009) · Science · doi:10.1126/science.1171245 · Cited by 11,220 · cited 1×
“ions of liquid-phase exfoliated graphene is Alexander A. Balandin, University of California - Riverside (2011) 22 promising for TIM applications. Progress in CVD graphene growth on various substrates [130, 131, 132] gives hope that one would have a much better control of thermal properties of supported or encased FLG.…”
BackgroundLarge-scale pattern growth of graphene films for stretchable transparent electrodes
Kim, K. S., Zhao, Y., Jang, H., Lee, S. Y., Kim, J. M., Kim, K. S., Ahn, J.-H., Kim, P., Choi, J.-Y., & Hong, B. H. (2009) · Nature · doi:10.1038/nature07719 · Cited by 10,452 · cited 1×
“ions of liquid-phase exfoliated graphene is Alexander A. Balandin, University of California - Riverside (2011) 22 promising for TIM applications. Progress in CVD graphene growth on various substrates [130, 131, 132] gives hope that one would have a much better control of thermal properties of supported or encased FLG.…”
BackgroundChemical methods for the production of graphenes
Park, S., & Ruoff, R. S. (2009) · Nature Nanotechnology · doi:10.1038/nnano.2009.58 · Cited by 6,663 · cited 1×
“The same factors limit K in the chemical vapor deposited (CVD) graphene, which is polycrystalline with misoriented grains [31-32].”
BackgroundRobertson, J. (2002) · Materials Science and Engineering: R: Reports · doi:10.1016/s0927-796x(02)00005-0 · Cited by 6,206 · cited 2×
“Among amorphous solids, ta-C is likely the material with the highest K [35-36].”
BackgroundLarge Area, Few-Layer Graphene Films on Arbitrary Substrates by Chemical Vapor Deposition
Reina, A., Jia, X., Ho, J., Nezich, D., Son, H., Bulovic, V., Dresselhaus, M. S., & Kong, J. (2009) · Nano Letters · doi:10.1021/nl801827v · Cited by 5,881 · cited 1×
“ions of liquid-phase exfoliated graphene is Alexander A. Balandin, University of California - Riverside (2011) 22 promising for TIM applications. Progress in CVD graphene growth on various substrates [130, 131, 132] gives hope that one would have a much better control of thermal properties of supported or encased FLG.…”
BackgroundScience of fullerenes and carbon nanotubes
Ebert, L. B. (1997) · Carbon · doi:10.1016/s0008-6223(97)89618-2 · Cited by 4,492
Thermal Transport Measurements of Individual Multiwalled Nanotubes
Kim, P., Shi, L., Majumdar, A., & McEuen, P. L. (2001) · Physical Review Letters · doi:10.1103/physrevlett.87.215502 · Cited by 3,378
Model for Lattice Thermal Conductivity at Low Temperatures
Callaway, J. (1959) · Physical Review · doi:10.1103/physrev.113.1046 · Cited by 3,218 · cited 2×
“In typical solids, the acoustic phonons, which carry bulk of heat, are scattered by other phonons, lattice defects, impurities, conduction electrons and interfaces [22, 25-26].”
BackgroundUnusually High Thermal Conductivity of Carbon Nanotubes
Berber, S., Kwon, Y.-K., & Tománek, D. (2000) · Physical Review Letters · doi:10.1103/physrevlett.84.4613 · Cited by 3,087 · cited 1×
“Table 1 summarizes experimental data for single-walled CNTs (SWCNTs) and multi-walled CNTs (MWCNTs”
BackgroundAnomalous thermal conductivity enhancement in nanotube suspensions
Choi, S. U. S., Zhang, Z. G., Yu, W., Lockwood, F. E., & Grulke, E. A. (2001) · Applied Physics Letters · doi:10.1063/1.1408272 · Cited by 2,769 · cited 1×
“interface materials (TIMs). XI. Graphene and Carbon Based Composites The needs for improved TIMs in modern electronics and optoelectronics stimulated interest to carbon materials as fillers for TIMs [105, 106, 107, 108, 109, 110, 111, 112, 113]. Current TIMs are based on polymers or greases filled with thermally condu…”
BackgroundLiquid Phase Production of Graphene by Exfoliation of Graphite in Surfactant/Water Solutions
Lotya, M., Hernandez, Y., King, P. J., Smith, R. J., Nicolosi, V., Karlsson, L. S., Blighe, F. M., De, S., Wang, Z., McGovern, I. T., et al. (2009) · Journal of the American Chemical Society · doi:10.1021/ja807449u · Cited by 2,282
Ghosh, S., Calizo, I., Teweldebrhan, D., Pokatilov, E. P., Nika, D. L., Balandin, A. A., Bao, W., Miao, F., & Lau, C. N. (2008) · Applied Physics Letters · doi:10.1063/1.2907977 · Cited by 2,099
Self-citationThermal conductivity measurement from 30 to 750 K: the 3ω method
Cahill, D. G. (1990) · Review of Scientific Instruments · doi:10.1063/1.1141498 · Cited by 1,928
Two-Dimensional Phonon Transport in Supported Graphene
Seol, J. H., Jo, I., Moore, A. L., Lindsay, L., Aitken, Z. H., Pettes, M. T., Li, X., Yao, Z., Huang, R., Broido, D., et al. (2010) · Science · doi:10.1126/science.1184014 · Cited by 1,926 · cited 2×
“important to know K of supported graphene, i.e. graphene attached to the substrate along its entire length. The measurements for exfoliated graphene on SiO 2 /Si revealed in-plane K≈600 W/mK near RT [78]. This value is below those reported for suspended graphene but it is still rather high exceeding K of Si (K=145 W/m…”
BackgroundThermal Conductance of an Individual Single-Wall Carbon Nanotube above Room Temperature
Pop, E., Mann, D., Wang, Q., Goodson, K., & Dai, H. (2006) · Nano Letters · doi:10.1021/nl052145f · Cited by 1,852 · cited 3×
“values obtained in the experiments were attributed to the ballistic transport regime achieved in some CNTs. Commonly quoted values for individual MWCNTs are ~3000 W/mK [10] and ~3500 W/mK for SW-CNTs [11] at RT. These values are above the bulk graphite limit of ~2000 W/mK. Thus, CNTs are nanostructures where heat tran…”
BackgroundCarbon nanotube composites for thermal management
Biercuk, M. J., Llaguno, M. C., Radosavljevic, M., Hyun, J. K., Johnson, A. T., & Fischer, J. E. (2002) · Applied Physics Letters · doi:10.1063/1.1469696 · Cited by 1,552 · cited 1×
“Molecular-dynamics simulations found that R B at the graphene/oil interface is similar or smaller than that at graphene/solid interface”
BackgroundKox, A. J., Klein, M. J., & Schulmann, R. (1996) · Cited by 1,495
Carbon nanotube composites for thermal management
Biercuk, M. J., Llaguno, M. C., Radosavljević, M., Johnson, A. T. C., Hyun, J. K., & Fischer, J. E. (2002) · ScholarlyCommons (University of Pennsylvania) · Cited by 1,476
Thermal conduction in classical low-dimensional lattices
Lepri, S. (2003) · Physics Reports · doi:10.1016/s0370-1573(02)00558-6 · Cited by 1,415
Dimensional crossover of thermal transport in few-layer graphene
Ghosh, S., Bao, W., Nika, D. L., Subrina, S., Pokatilov, E. P., Lau, C. N., & Balandin, A. A. (2010) · Nature Materials · doi:10.1038/nmat2753 · Cited by 1,388 · cited 2×
“ermal transport limited by (i) intrinsic properties of FLG lattice, e.g. crystal anharmonicity, and (ii) extrinsic effects, e.g. by phonon – boundary or defect scattering. The optothermal Raman study [74] found that K of suspended uncapped FLG decreases with increasing n approaching the bulk graphite limit (Figure 3a)…”
BackgroundMethodSelf-citationThermal Transport in Suspended and Supported Monolayer Graphene Grown by Chemical Vapor Deposition
Cai, W., Moore, A. L., Zhu, Y., Li, X., Chen, S., Shi, L., & Ruoff, R. S. (2010) · Nano Letters · doi:10.1021/nl9041966 · Cited by 1,262 · cited 2×
“can be determined either via measuring the integrated Raman intensity of G peak, as in the original experiments [16], or by a detector placed under the graphene layer, as in the follow up experiments [75, 76]. Since optical absorption in graphene depends on the light wavelength [94] and can be affected by strain, defe…”
BackgroundMethodTemperature Dependence of the Raman Spectra of Graphene and Graphene Multilayers
Calizo, I., Balandin, A. A., Bao, W., Miao, F., & Lau, C. N. (2007) · Nano Letters · doi:10.1021/nl071033g · Cited by 1,226 · cited 1×
“The first measurements of the thermal properties of graphen”
BackgroundSelf-citationThermal conductivity of single-walled carbon nanotubes
Hone, J., Whitney, M., Piskoti, C., & Zettl, A. (1999) · Physical Review B · doi:10.1103/physrevb.59.r2514 · Cited by 1,188
Ziman, J. M. (2001) · Oxford University Press eBooks · doi:10.1093/acprof:oso/9780198507796.001.0001 · Cited by 1,179
Origin of the1150−cm−1Raman mode in nanocrystalline diamond
Ferrari, A. C., & Robertson, J. (2001) · Physical Review B · doi:10.1103/physrevb.63.121405 · Cited by 1,176 · cited 1×
“l D~3-5 nm, where thermal transport is controlled by the intrinsic properties of the grain boundaries [49]. The grain boundaries contain sp2-phase as opposed to the sp3-phase carbon inside the grains [54]. Figure 2: Thermal conductivity of disordered and nanostructured carbon materials. (a) K of DLC as a function of m…”
BackgroundMounet, N., & Marzari, N. (2005) · Physical Review B · doi:10.1103/physrevb.71.205214 · Cited by 1,153 · cited 1×
“4 8 r 1. 0)u10 6 (K-1) for T<300 K, which switches sign at T≈900 K for SLG and T≈400 K for BLG [135]. These properties are rooted in the intricacies of the phonon dispersion in graphene and FLG [83, 135, 136, 137, 138]. One can expect that graphene thermal properties can be strain-engineered in a way similar to ele…”
BackgroundThermal conductivity of carbon nanotubes
Che, J., Çagin, T., & Goddard, W. A. (2000) · Nanotechnology · doi:10.1088/0957-4484/11/2/305 · Cited by 1,144 · cited 1×
“tures with reported experimental K exceeding that of bulk graphite and diamond. Table I summarizes experimental data for single-wall (SW) and multi-wall (MW) CNTs [10- 11, 63-66]. Theoretical results [67, 68, 69, 70] are also provided for comparison. There is substantial data scatter in the reported RT values for CNTs…”
BackgroundStrain Engineering of Graphene’s Electronic Structure
Pereira, V. M., & Castro Neto, A. H. (2009) · Physical Review Letters · doi:10.1103/physrevlett.103.046801 · Cited by 1,075 · cited 1×
“One can expect that graphene thermal properties can be strain-engineered in a way similar to electronic properties [139].”
BackgroundGraphite Nanoplatelet−Epoxy Composite Thermal Interface Materials
Yu, A., Ramesh, P., Itkis, M. E., Bekyarova, E., & Haddon, R. C. (2007) · The Journal of Physical Chemistry C · doi:10.1021/jp071761s · Cited by 1,039
High-Concentration, Surfactant-Stabilized Graphene Dispersions
Lotya, M., King, P. J., Khan, U., De, S., & Coleman, J. N. (2010) · ACS Nano · doi:10.1021/nn1005304 · Cited by 1,015
Phonon thermal conduction in graphene: Role of Umklapp and edge roughness scattering
Nika, D. L., Pokatilov, E. P., Askerov, A. S., & Balandin, A. A. (2009) · Physical Review B · doi:10.1103/physrevb.79.155413 · Cited by 967
Self-citationMeasuring the Thermal Conductivity of a Single Carbon Nanotube
Fujii, M., Zhang, X., Xie, H., Ago, H., Takahashi, K., Ikuta, T., Abe, H., & Shimizu, T. (2005) · Physical Review Letters · doi:10.1103/physrevlett.95.065502 · Cited by 900 · cited 1×
“Table 1 summarizes experimental data for single-walled CNTs (SWCNTs) and multi-walled CNTs (MWCNTs”
BackgroundThermal Conductance and Thermopower of an Individual Single-Wall Carbon Nanotube
Yu, C., Shi, L., Yao, Z., Li, D., & Majumdar, A. (2005) · Nano Letters · doi:10.1021/nl051044e · Cited by 871
Flexural phonons and thermal transport in graphene
Lindsay, L., Broido, D. A., & Mingo, N. (2010) · Physical Review B · doi:10.1103/physrevb.82.115427 · Cited by 860 · cited 1×
“There have been opposite view expressed to the importance of ZA phonons, from negligible [23, 33, 61], to dominant [69, 78, 81, 85].”
BackgroundThermal Conductivity and Thermal Rectification in Graphene Nanoribbons: A Molecular Dynamics Study
Hu, J., Ruan, X., & Chen, Y. P. (2009) · Nano Letters · doi:10.1021/nl901231s · Cited by 784
Thermoelectric and Magnetothermoelectric Transport Measurements of Graphene
Zuev, Y. M., Chang, W., & Kim, P. (2009) · Physical Review Letters · doi:10.1103/physrevlett.102.096807 · Cited by 777 · cited 1×
“Thermoelectric effects in graphene Experimental studie”
Thickness of graphene and single-wall carbon nanotubes
Huang, Y., Wu, J., & Hwang, K. C. (2006) · Physical Review B · doi:10.1103/physrevb.74.245413 · Cited by 656 · cited 1×
“of graphene and graphite contains ambiguity related to a definition of the graphene thickness h. Most studies used h=0.34 nm defined by the carbon-bond length. However, this definition is not unique [95, 96]. One can introduce h from the inter-atomic potential [95] or start from Young’s modulus and tensile strength [9…”
BackgroundInfluentialAb initio theory of the lattice thermal conductivity in diamond
Ward, A., Broido, D. A., Stewart, D. A., & Deinzer, G. (2009) · Physical Review B · doi:10.1103/physrevb.80.125203 · Cited by 655
Phonon heat conduction in a semiconductor nanowire
Zou, J., & Balandin, A. (2001) · Journal of Applied Physics · doi:10.1063/1.1345515 · Cited by 654 · cited 1×
“event K degradation, he still benefits from the high in-plane K ≈2000 W/mK of graphite, which is exceptional compared to semiconductors, e.g. K≈150 W/mK in bulk Si and K≈10 W/mK in Si nanowires at RT [134]. The explosive growth of the new field of thermal properties of graphene and low-dimensional carbons does not all…”
BackgroundSelf-citationBalandin, A., & Wang, K. L. (1998) · Physical Review B · doi:10.1103/physrevb.58.1544 · Cited by 647 · cited 1×
“Nanowires do not conduct heat as well as bulk crystals due to increased phonon - boundary scattering [3] or changes in the phonon dispersion [4].”
BackgroundSelf-citationEquivalent-continuum modeling of nano-structured materials
Odegard, G. (2002) · Composites Science and Technology · doi:10.1016/s0266-3538(02)00113-6 · Cited by 643
Chen, S., Moore, A. L., Cai, W., Suk, J. W., An, J., Mishra, C., Amos, C., Magnuson, C. W., Kang, J., Shi, L., et al. (2011) · ACS Nano · doi:10.1021/nn102915x · Cited by 575
Lattice thermal conductivity of graphene flakes: Comparison with bulk graphite
Nika, D. L., Ghosh, S., Pokatilov, E. P., & Balandin, A. A. (2009) · Applied Physics Letters · doi:10.1063/1.3136860 · Cited by 533
Self-citationBreakdown of Fourier’s Law in Nanotube Thermal Conductors
Chang, C. W., Okawa, D., Garcia, H., Majumdar, A., & Zettl, A. (2008) · Physical Review Letters · doi:10.1103/physrevlett.101.075903 · Cited by 520 · cited 1×
“o either limit the system size or introduce disorder to have the physically meaningful finite value of K. These findings led to discussions of the validity of Fourier’s law in low-dimensional systems [7, 8]. Carbon materials, which form a variety of allotropes [9], occupy a unique place in terms of their thermal prope…”
BackgroundAnomalous Thermoelectric Transport of Dirac Particles in Graphene
Wei, P., Bao, W., Pu, Y., Lau, C. N., & Shi, J. (2009) · Physical Review Letters · doi:10.1103/physrevlett.102.166808 · Cited by 455 · cited 1×
“as the gate bias crossed the charge neutrality point. Similar results with Alexander A. Balandin, University of California - Riverside (2011) 21 TEP of ~50-100 V/K were obtained in other experiments [119, 120]. The theory gave consistent results [121]. It was established theoretically that TEP behaves as 1/(n 0 )1/2 a…”
ResultThermal conductivity of graphene nanoribbons
Guo, Z., Zhang, D., & Gong, X.-G. (2009) · Applied Physics Letters · doi:10.1063/1.3246155 · Cited by 450 · cited 1×
“n the last few years, a number of MD studies, with Tersoff and Brenner potentials, addressed heat conduction in graphene nanoribbons (GNR) with various length, edge roughness and defect concentration [84, 85, 86, 87, 88, 89, 90, 91]. A recent MD study found K≈8000 - 10000 W/mK at RT for square graphene sheet, which wa…”
BackgroundModification of graphene properties due to electron-beam irradiation
Teweldebrhan, D., & Balandin, A. A. (2009) · Applied Physics Letters · doi:10.1063/1.3062851 · Cited by 434 · cited 1×
“f K p due to phononedge disorder scattering without substantial deterioration of electron transport [126]. Graphene, with intentionally introduced lattice disorder, e.g. via electron beam irradiation [127], or charged impurities [128] can become an option for TE energy conversion. Graphene reveals interesting TE effec…”
BackgroundSelf-citationIsotope Effect on the Thermal Conductivity of Boron Nitride Nanotubes
Chang, C. W., Fennimore, A. M., Afanasiev, A., Okawa, D., Ikuno, T., Garcia, H., Li, D., Majumdar, A., & Zettl, A. (2006) · Physical Review Letters · doi:10.1103/physrevlett.97.085901 · Cited by 419 · cited 2×
“anges from 1 to 2 is in line with the earlier theoretical predictions [66]. It is also consistent with the experimental dependence of K on the outer-diameter (i.e. number of atomic layers) in MW-CNTs [65, 71]. Another group solved BTE under assumptions that in-plane interactions are described by Tersoff potential whil…”
BackgroundResultThermal conductivity of suspended pristine graphene measured by Raman spectroscopy
Lee, J.-U., Yoon, D., Kim, H., Lee, S. W., & Cheong, H. (2011) · Physical Review B · doi:10.1103/physrevb.83.081419 · Cited by 411 · cited 2×
“, 82]. In order to compare directly independent measurements of thermal conductivity of graphene, I reproduce here the measured K as the function of temperature T from ref. (92), and add experimental [16, 17, 76, 93] and theoretical [62, 83] data from other works (See Figure 4b). In this plot, K is larger for graphene…”
BackgroundMak, K. F., Shan, J., & Heinz, T. F. (2011) · Physical Review Letters · doi:10.1103/physrevlett.106.046401 · Cited by 405
Segal, M. (2009) · Nature Nanotechnology · doi:10.1038/nnano.2009.279 · Cited by 403 · cited 1×
“ch was verified up to 2600 K [115]. The use of liquid-phase exfoliated graphene [116] in advanced TIMs can become the first industry application, which would require large quantities of this material [117]. XII. Thermoelectric Effects in Graphene Experimental studied [118] demonstrated that graphene, with the electron…”
BackgroundAnomalous Heat Conduction in One-Dimensional Momentum-Conserving Systems
Narayan, O., & Ramaswamy, S. (2002) · Physical Review Letters · doi:10.1103/physrevlett.89.200601 · Cited by 396 · cited 2×
“0). Alexander A. Balandin, University of California - Riverside (2011) 25 Appendix II: Unique Features of Heat Conduction in 2D Crystals Investigation of heat conduction in graphene [16, 17] and CNTs [8] raised the issue of ambiguity in definition of the intrinsic thermal conductivity for 2D and 1D crystal lattices. I…”
BackgroundThermal Conductivity of Graphene in Corbino Membrane Geometry
Faugeras, C., Faugeras, B., Orlita, M., Potemski, M., Nair, R. R., & Geim, A. K. (2010) · ACS Nano · doi:10.1021/nn9016229 · Cited by 388 · cited 4×
“can be determined either via measuring the integrated Raman intensity of G peak, as in the original experiments [16], or by a detector placed under the graphene layer, as in the follow up experiments [75, 76]. Since optical absorption in graphene depends on the light wavelength [94] and can be affected by strain, defe…”
BackgroundInfluentialThermal Expansion of Graphene Composites
Wang, S., Tambraparni, M., Qiu, J., Tipton, J., & Dean, D. (2009) · Macromolecules · doi:10.1021/ma900631c · Cited by 387 · cited 2×
“interface materials (TIMs). XI. Graphene and Carbon Based Composites The needs for improved TIMs in modern electronics and optoelectronics stimulated interest to carbon materials as fillers for TIMs [105, 106, 107, 108, 109, 110, 111, 112, 113]. Current TIMs are based on polymers or greases filled with thermally condu…”
BackgroundThermal conductivity of graphite in the basal plane
Klemens, P. G., & Pedraza, D. F. (1994) · Carbon · doi:10.1016/0008-6223(94)90096-5 · Cited by 386 · cited 1×
“The experimental K values for HOPG are in excellent agreement with theoretical predictions for the intrinsic K of graphit”
ResultBreakdown current density of graphene nanoribbons
Murali, R., Yang, Y., Brenner, K., Beck, T., & Meindl, J. D. (2009) · Applied Physics Letters · doi:10.1063/1.3147183 · Cited by 385 · cited 1×
“ross the interface [78]. An independent study, which used electrical self-heating method, found K≈1000 - 1400 W/mK near RT for graphene nanoribbons (GNRs) for n<5 and width 16 nm < W < 52 nm [79]. The breakdown current density of graphene was determined to be ~108 A/cm2, close to that of CNTs. The authors [79…”
BackgroundHeat flow and lattice vibrations in glasses
Cahill, D. G., & Pohl, R. O. (1989) · Solid State Communications · doi:10.1016/0038-1098(89)90630-3 · Cited by 384 · cited 1×
“It increases monotonically with T , which is expected for disordered materials, where the heat conduction mechanism is hopping of localized excitations [34].”
BackgroundEnergy Dissipation in Graphene Field-Effect Transistors
Freitag, M., Steiner, M., Martin, Y., Perebeinos, V., Chen, Z., Tsang, J. C., & Avouris, P. (2009) · Nano Letters · doi:10.1021/nl803883h · Cited by 366 · cited 1×
“The actual TBR is usually higher than Kapitza resistance due to interface imperfections. Heat conduction across graphene or FLG was measured by several different techniques, including electrical 3- [98], Raman-electrical [99, 100], and optical pump-and-probe [101] methods. The thermo-reflectance technique was used to…”
MethodThe CVD of Nanodiamond Materials
Butler, J. E., & Sumant, A. V. (2008) · Chemical Vapor Deposition · doi:10.1002/cvde.200700037 · Cited by 357 · cited 1×
“Progress in CVD polycrystalline diamond ( p-D) films – ultrananocrystalline (UNCD), nanocrystalline (NCD) and microcrystalline (MCD) (Figure 2b) – renewed interest to their thermal properties [43-44].”
BackgroundCarbon Nanosheets for Polymeric Nanocomposites with High Thermal Conductivity
Veca, L. M., Meziani, M. J., Wang, W., Wang, X., Lu, F., Zhang, P., Lin, Y., Fee, R., Connell, J. W., & Sun, Y. (2009) · Advanced Materials · doi:10.1002/adma.200802317 · Cited by 355 · cited 1×
“s found to vary in the range ~(5-30)×10-5 (1/oC) and decreased with increasing graphene fraction [111]. Carbon nanoparticles strongly enhance thermal diffusivity of epoxy to D T ~60 mm 2/s at 70 vol% [114]. An important characteristic for TIM applications of graphene is its high temperature stability, which was verifi…”
BackgroundHeat Conduction across Monolayer and Few-Layer Graphenes
Koh, Y. K., Bae, M.-H., Cahill, D. G., & Pop, E. (2010) · Nano Letters · doi:10.1021/nl101790k · Cited by 355 · cited 1×
“to interface imperfections. Heat conduction across graphene or FLG was measured by several different techniques, including electrical 3- [98], Raman-electrical [99, 100], and optical pump-and-probe [101] methods. The thermo-reflectance technique was used to study graphite interface with Cr, Al, Ti and Au [102]. The RT…”
MethodThermal contact resistance between graphene and silicon dioxide
Chen, Z., Jang, W., Bao, W., Lau, C. N., & Dames, C. (2009) · Applied Physics Letters · doi:10.1063/1.3245315 · Cited by 349 · cited 1×
“lly higher than Kapitza resistance due to interface imperfections. Heat conduction across graphene or FLG was measured by several different techniques, including electrical 3- [98], Raman-electrical [99, 100], and optical pump-and-probe [101] methods. The thermo-reflectance technique was used to study graphite interfa…”
MethodEvans, W. J., Hu, L., & Keblinski, P. (2010) · Applied Physics Letters · doi:10.1063/1.3435465 · Cited by 339
Thickness-Dependent Thermal Conductivity of Encased Graphene and Ultrathin Graphite
Jang, W., Chen, Z., Bao, W., Lau, C. N., & Dames, C. (2010) · Nano Letters · doi:10.1021/nl101613u · Cited by 339 · cited 2×
“re thermal transport is limited by the acoustic phonon scattering from the top and bottom boundaries and disorder, which is unavoidable when FLG is embedded between two layers of dielectrics. A study [82], conducted with the 3-omega technique, found K≈160 W/mK for encased SLG at T=310 K. It increases to ~1000 W/mK for…”
BackgroundResultThermal Conductivity of Solids
Parrott, J. E., Stuckes, A. D., & Klemens, P. G. (1977) · Physics Today · doi:10.1063/1.3037419 · Cited by 335 · cited 1×
“In typical solids, the acoustic phonons, which carry the bulk of heat, are scattered by other phonons, lattice defects, impurities, conduction electrons and interface”
BackgroundEnhanced thermoelectric figure of merit in edge-disordered zigzag graphene nanoribbons
Sevinçli, H., & Cuniberti, G. (2010) · Physical Review B · doi:10.1103/physrevb.81.113401 · Cited by 306 · cited 1×
“Theoretical studies suggest that ZT can be made as high as ∼4 at room temperature in zigzag graphene nanoribbon”
BackgroundThermopower and Nernst effect in graphene in a magnetic field
Checkelsky, J. G., & Ong, N. P. (2009) · Physical Review B · doi:10.1103/physrevb.80.081413 · Cited by 301 · cited 1×
“as the gate bias crossed the charge neutrality point. Similar results with Alexander A. Balandin, University of California - Riverside (2011) 21 TEP of ~50-100 V/K were obtained in other experiments [119, 120]. The theory gave consistent results [121]. It was established theoretically that TEP behaves as 1/(n 0 )1/2 a…”
ResultInfluence of Polymeric Residue on the Thermal Conductivity of Suspended Bilayer Graphene
Pettes, M. T., Jo, I., Yao, Z., & Shi, L. (2011) · Nano Letters · doi:10.1021/nl104156y · Cited by 299
Continuum model for the vibration of multilayered graphene sheets
Kitipornchai, S., He, X. Q., & Liew, K. M. (2005) · Physical Review B · doi:10.1103/physrevb.72.075443 · Cited by 288
Elastic, mechanical, and thermal properties of nanocrystalline diamond films
Philip, J., Hess, P., Feygelson, T., Butler, J. E., Chattopadhyay, S., Chen, K. H., & Chen, L. C. (2003) · Journal of Applied Physics · doi:10.1063/1.1537465 · Cited by 280 · cited 1×
“rystalline diamond (p-D) films – ultrananocrystalline (UNCD), nanocrystalline (NCD) and microcrystalline (MCD) (Figure 2b) – renewed interest to their thermal properties [43, 44]. Most studies of p-D [45, 46, 47, 48, 49, 50, 51] agree that K depends strongly on the grain size D and cover the range from ~1-10 W/mK in U…”
BackgroundThermal Transport in Suspended and Supported Few-Layer Graphene
Wang, Z., Xie, R., Bui, C. T., Liu, D., Ni, X., Li, B., & Thong, J. T. L. (2011) · Nano Letters · doi:10.1021/nl102923q · Cited by 279 · cited 1×
“strain-engineered in a way similar to electronic properties [139]. Another important issue is the effect of the defects, grain size and orientation on K(T) of graphene. Recently, two similar studies [140, 141] suggested that K(T)~ T1.4 or ~T1.5 dependences prove that ZA modes are dominant in graphene heat transport. H…”
Thermal conductivity of diamond-like carbon films
Shamsa, M., Liu, W. L., Balandin, A. A., Casiraghi, C., Milne, W. I., & Ferrari, A. C. (2006) · Applied Physics Letters · doi:10.1063/1.2362601 · Cited by 247
Self-citationHeat Flow in Regular and Disordered Harmonic Chains
Casher, A., & Lebowitz, J. L. (1971) · Journal of Mathematical Physics · doi:10.1063/1.1665794 · Cited by 247 · cited 1×
“at conduction in graphene and graphene nanoribbons [83 - 91]. The high-quality suspended FLG also made possible experimental testing of theoretical results obtained for heat conduction in 2D lattices [56, 57, 58, 59, 60]. Theoretical description of thermal properties of 2D graphene is closely related to that of CNTs […”
BackgroundAuciello, O., & Sumant, A. V. (2010) · Diamond and Related Materials · doi:10.1016/j.diamond.2010.03.015 · Cited by 247
Thermal conductivity of single-walled carbon nanotubes
Hone, J., Whitney, M., & Zettl, A. (1999) · Synthetic Metals · doi:10.1016/s0379-6779(98)01070-4 · Cited by 240 · cited 2×
“of California - Riverside (2011) 10 diffusive but close to the ballistic transition. At T<30 K the energy-independent phonon MFP of ~0.5 – 1.5 mm was extracted from measurements for SW-CNT bundles [63]. The peak in CNT K was achieved at T~320 K [10], which is substantially higher T compared to bulk crystals. This i…”
MethodInfluentialHeat conduction in graphene: experimental study and theoretical interpretation
Ghosh, S., Nika, D. L., Pokatilov, E. P., & Balandin, A. A. (2009) · New Journal of Physics · doi:10.1088/1367-2630/11/9/095012 · Cited by 235 · cited 1×
“The first experimental studies [16-17, 73-74] of thermal conductivity of graphene were carried out at UC-Riverside (see details of the measurement procedures in Appendix I).”
MethodSelf-citationEffect of phonon confinement on the thermoelectric figure of merit of quantum wells
Balandin, A., & Wang, K. L. (1998) · Journal of Applied Physics · doi:10.1063/1.368928 · Cited by 233 · cited 1×
“In nanostructures with D Λ , phonon dispersion can undergo modifications owing to confinement resulting in changes in u and more complicated size dependenc”
BackgroundSelf-citationTheory of Thermal Conduction in Thin Ceramic Films
Klemens, P. G. (2001) · International Journal of Thermophysics · doi:10.1023/a:1006776107140 · Cited by 225
Thermal Conductivity of the Elements: A Comprehensive Review
Ho, C.-Y., Powell, R. W., & Liley, P. E. (1974) · Cited by 224
Thermal expansion of carbon structures
Schelling, P. K., & Keblinski, P. (2003) · Physical Review B · doi:10.1103/physrevb.68.035425 · Cited by 221 · cited 1×
“4 8 r 1. 0)u10 6 (K-1) for T<300 K, which switches sign at T≈900 K for SLG and T≈400 K for BLG [135]. These properties are rooted in the intricacies of the phonon dispersion in graphene and FLG [83, 135, 136, 137, 138]. One can expect that graphene thermal properties can be strain-engineered in a way similar to ele…”
BackgroundThermal conductivity of amorphous carbon thin films
Bullen, A. J., O’Hara, K. E., Cahill, D. G., Monteiro, O., & von Keudell, A. (2000) · Journal of Applied Physics · doi:10.1063/1.1314301 · Cited by 214 · cited 1×
“It is difficult to compare directly its accuracy with that of the thermal-bridge or 3- techniques [21, 39-42] when the latter are applied to graphene.”
MethodThermal conductivity of solids
Schunck, M. (2017) · HEDH Multimedia · doi:10.1615/hedhme.a.000520 · Cited by 212
Thermal conductance and phonon transmissivity of metal–graphite interfaces
Schmidt, A. J., Collins, K. C., Minnich, A. J., & Chen, G. (2010) · Journal of Applied Physics · doi:10.1063/1.3428464 · Cited by 211 · cited 1×
“ques, including electrical 3- [98], Raman-electrical [99, 100], and optical pump-and-probe [101] methods. The thermo-reflectance technique was used to study graphite interface with Cr, Al, Ti and Au [102]. The RT TBR of ~10-8 (Km2/W) was found in most of cases. The studies are in agreement that the cross-plane conduct…”
MethodMorath, C. J., Maris, H. J., Cuomo, J. J., Pappas, D. L., Grill, A., Patel, V. V., Doyle, J. P., & Saenger, K. L. (1994) · Journal of Applied Physics · doi:10.1063/1.357560 · Cited by 209 · cited 2×
“lications. DLC consists not only of a-C but also of the hydrogenated alloys, a-C:H. Hydrogen-free DLC with the highest sp3 content are called tetrahedral amorphous carbon (ta-C). Experimental studies [36, 37, 38, 39, 40, 41, 42] revealed that heat conduction in DLC is mostly governed by the amount and structural disor…”
BackgroundInfluentialBallistic Thermal Conductance of Graphene Ribbons
Muñoz, E., Lu, J., & Yakobson, B. I. (2010) · Nano Letters · doi:10.1021/nl904206d · Cited by 205 · cited 1×
“n the last few years, a number of MD studies, with Tersoff and Brenner potentials, addressed heat conduction in graphene nanoribbons (GNR) with various length, edge roughness and defect concentration [84, 85, 86, 87, 88, 89, 90, 91]. A recent MD study found K≈8000 - 10000 W/mK at RT for square graphene sheet, which wa…”
BackgroundTheory of thermopower in two-dimensional graphene
Hwang, E. H., Rossi, E., & Das Sarma, S. (2009) · Physical Review B · doi:10.1103/physrevb.80.235415 · Cited by 196
Momentum Conserving Model with Anomalous Thermal Conductivity in Low Dimensional Systems
Basile, G., Bernardin, C., & Olla, S. (2006) · Physical Review Letters · doi:10.1103/physrevlett.96.204303 · Cited by 194
Heat Conduction in the Disordered Harmonic Chain Revisited
Dhar, A. (2001) · Physical Review Letters · doi:10.1103/physrevlett.86.5882 · Cited by 193 · cited 1×
“at conduction in graphene and graphene nanoribbons [83 - 91]. The high-quality suspended FLG also made possible experimental testing of theoretical results obtained for heat conduction in 2D lattices [56, 57, 58, 59, 60]. Theoretical description of thermal properties of 2D graphene is closely related to that of CNTs […”
BackgroundDonadio, D., & Galli, G. (2007) · Physical Review Letters · doi:10.1103/physrevlett.99.255502 · Cited by 193
Suppression of thermal conductivity in graphene nanoribbons with rough edges
Savin, A. V., Kivshar, Y. S., & Hu, B. (2010) · Physical Review B · doi:10.1103/physrevb.82.195422 · Cited by 193 · cited 2×
“For the ribbons with fixed L =10 nm and width W varying from 1 to 10 nm, K increased from ~1000 W/mK to 7000 W/mK. Thermal conductivity in GNR with rough edges can be suppressed by orders of magnitude as compared to that in GNR with perfect edges [84, 87].”
BackgroundMeasurement of the thermal conductance of the graphene/SiO2 interface
Mak, K. F., Lui, C. H., & Heinz, T. F. (2010) · Applied Physics Letters · doi:10.1063/1.3511537 · Cited by 192
Pettes, M. T., & Shi, L. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200900932 · Cited by 190
Thermal conduction in semiconductors
Drabble, J. R., Tockner, K., Robinson, C. T., & Peter, F. D. (1961) · Medical Entomology and Zoology · Cited by 189
Diameter dependence of carbon nanotube thermal conductivity and extension to the graphene limit
Lindsay, L., Broido, D. A., & Mingo, N. (2010) · Physical Review B · doi:10.1103/physrevb.82.161402 · Cited by 187
Nelson, F. J., Kamineni, V. K., Zhang, T., Comfort, E. S., Lee, J. U., & Diebold, A. C. (2010) · Applied Physics Letters · doi:10.1063/1.3525940 · Cited by 185
Zhong, W.-R., Zhang, M.-P., Ai, B.-Q., & Zheng, D.-Q. (2011) · Applied Physics Letters · doi:10.1063/1.3567415 · Cited by 180 · cited 1×
“nt with the theory for the crystal lattices described by the FermiPasta-Ulam Hamiltonians [56]. Recent non-equilibrium MD calculations for graphene nanoribbons with the number of planes n from 1 to 8 [80] gave the thickness dependence K(n) in excellent agreement with the experiment [74]. As seen in Figure 3b, K satura…”
ResultYu, W., Xie, H., & Chen, W. (2010) · Journal of Applied Physics · doi:10.1063/1.3372733 · Cited by 179 · cited 1×
“interface materials (TIMs). XI. Graphene and Carbon Based Composites The needs for improved TIMs in modern electronics and optoelectronics stimulated interest to carbon materials as fillers for TIMs [105, 106, 107, 108, 109, 110, 111, 112, 113]. Current TIMs are based on polymers or greases filled with thermally condu…”
BackgroundTheory of the a-Plane Thermal Conductivity of Graphite
KLEMENS, P. G. (2000) · Journal of Wide Bandgap Materials · doi:10.1106/7fp2-qbln-tjpa-nc66 · Cited by 168 · cited 1×
“ornia - Riverside (2011) 26 The uniqueness of heat conduction in graphene can be illustrated with an expression, derived by Klemens, for the intrinsic Umklapp-limited thermal conductivity of graphene [23, 61]: (2 2 ) 1 ( 4 / ) ln( / ). K m f m T f m f B Here m is the mass density, f m is the upper limit of the phonon…”
BackgroundThermal transport and grain boundary conductance in ultrananocrystalline diamond thin films
Angadi, M. A., Watanabe, T., Bodapati, A., Xiao, X., Auciello, O., Carlisle, J. A., Eastman, J. A., Keblinski, P., Schelling, P. K., & Phillpot, S. R. (2006) · Journal of Applied Physics · doi:10.1063/1.2199974 · Cited by 165
Collected Papers of P.L. Kapitza
(1965) · Elsevier eBooks · doi:10.1016/c2013-0-01850-6 · Cited by 164
Hu, J., Schiffli, S., Vallabhaneni, A. K., Ruan, X., & Chen, Y. P. (2010) · Applied Physics Letters · doi:10.1063/1.3491267 · Cited by 164 · cited 1×
“K is suppressed. Although graphene reveals extremely high intrinsic K, its dominant K p component can be efficiently suppressed by utilizing graphene ribbons with rough edges or introducing disorder [87, 124, 125]. Theoretical studies suggested that ZT can be made as high as ~4 at RT in zigzag GNRs [126]. For comparis…”
BackgroundYu, A., Itkis, M. E., Bekyarova, E. B., & Haddon, R. C. (2006) · Applied Physics Letters · doi:10.1063/1.2357580 · Cited by 162
Mechanism of thermal conductivity reduction in few-layer graphene
Singh, D., Murthy, J. Y., & Fisher, T. S. (2011) · Journal of Applied Physics · doi:10.1063/1.3622300 · Cited by 159
Theory of carrier transport in bilayer graphene
Das Sarma, S., Hwang, E. H., & Rossi, E. (2010) · Physical Review B · doi:10.1103/physrevb.81.161407 · Cited by 159 · cited 1×
“point. Similar results with Alexander A. Balandin, University of California - Riverside (2011) 21 TEP of ~50-100 V/K were obtained in other experiments [119, 120]. The theory gave consistent results [121]. It was established theoretically that TEP behaves as 1/(n 0 )1/2 at high carrier density n 0 , but saturates at l…”
ResultBuckyball microwave plasmas: Fragmentation and diamond-film growth
Gruen, D. M., Liu, S., Krauss, A. R., & Pan, X. (1994) · Journal of Applied Physics · doi:10.1063/1.356367 · Cited by 159 · cited 1×
“rystalline diamond (p-D) films – ultrananocrystalline (UNCD), nanocrystalline (NCD) and microcrystalline (MCD) (Figure 2b) – renewed interest to their thermal properties [43, 44]. Most studies of p-D [45, 46, 47, 48, 49, 50, 51] agree that K depends strongly on the grain size D and cover the range from ~1-10 W/mK in U…”
BackgroundCarbon nanotube thermal interface material for high-brightness light-emitting-diode cooling
Zhang, K., Chai, Y., Yuen, M. M. F., Xiao, D. G. W., & Chan, P. C. H. (2008) · Nanotechnology · doi:10.1088/0957-4484/19/21/215706 · Cited by 156 · cited 1×
“interface materials (TIMs). XI. Graphene and Carbon Based Composites The needs for improved TIMs in modern electronics and optoelectronics stimulated interest to carbon materials as fillers for TIMs [105, 106, 107, 108, 109, 110, 111, 112, 113]. Current TIMs are based on polymers or greases filled with thermally condu…”
BackgroundThermal boundary resistance at the graphene-oil interface
Konatham, D., & Striolo, A. (2009) · Applied Physics Letters · doi:10.1063/1.3251794 · Cited by 146 · cited 1×
“can depend strongly on the surface roughness, presence or absence of suspended regions in graphene layers, and methods of graphene preparation. MD simulations found that TBR at graphene-oil interface [104, 107] is similar or smaller than that at the graphene-solid interfaces [104 - 107]. Low TBR of graphene with many…”
BackgroundAtomistic simulations of structural and thermodynamic properties of bilayer graphene
Захарченко, К. В., Los, J. H., Katsnelson, M. I., & Fasolino, A. (2010) · Physical Review B · doi:10.1103/physrevb.81.235439 · Cited by 145 · cited 1×
“, which were not discussed in details, include graphene’s negative thermalexpansion coefficient D ( 4 8 r 1. 0)u10 6 (K-1) for T<300 K, which switches sign at T≈900 K for SLG and T≈400 K for BLG [135]. These properties are rooted in the intricacies of the phonon dispersion in graphene and FLG [83, 135, 136, 137, 13…”
BackgroundThermal Transport in Graphene Nanostructures: Experiments and Simulations
Jauregui, L. A., Yue, Y., Sidorov, A., Hu, J., Yu, Q., Lopez, G., Jalilian, R., Benjamin, D. K., Delkd, D. A., Wu, W., et al. (2010) · ECS Transactions · doi:10.1149/1.3367938 · Cited by 142 · cited 1×
“ain distribution in the suspended graphene of various sizes and geometries may also affect the results. Other optothermal studies with suspended graphene found K in the range from ~1500 to ~5000 W/mK [77]. The data for suspended or partially suspended graphene is closer to the intrinsic K because suspension reduces th…”
BackgroundThermal conduction in semiconductors
Bhandari, C. M., & Rowe, D. M. (1988) · Medical Entomology and Zoology · Cited by 141
Heat Removal in Silicon-on-Insulator Integrated Circuits With Graphene Lateral Heat Spreaders
Subrina, S., Kotchetkov, D., & Balandin, A. A. (2009) · IEEE Electron Device Letters · doi:10.1109/led.2009.2034116 · Cited by 140 · cited 1×
“e efficiency of photovoltaic solar cell via reduction of its temperature under illumination. Similarly, FLG serving as interconnects in 3D electronics can simultaneously act as lateral heat spreaders [129]. The demonstrated K enhancement of composites by addition of small volume fractions of liquid-phase exfoliated gr…”
BackgroundSelf-citationThermal conductivity of isotopically enriched Si
Capinski, W. S., Maris, H. J., Bauser, E., Silier, I., Asen-Palmer, M., Ruf, T., Cardona, M., & Gmelin, E. (1997) · Applied Physics Letters · doi:10.1063/1.119384 · Cited by 134
Hu, J., Schiffli, S., Vallabhaneni, A. K., et al. (2010) · Purdue e-Pubs (Purdue University System) · Cited by 132
Thermal conductance of graphene and dimerite
Jiang, J.-W., Wang, J., & Li, B. (2009) · Physical Review B · doi:10.1103/physrevb.79.205418 · Cited by 129
On the isotope effect in thermal conductivity of silicon
Inyushkin, A. V., Taldenkov, A. N., Gibin, A. M., Gusev, A. V., & Pohl, H. ‐. (2004) · physica status solidi (c) · doi:10.1002/pssc.200405341 · Cited by 126
Rego, L. G. C., & Kirczenow, G. (1999) · Physical review. B, Condensed matter · doi:10.1103/physrevb.59.13080 · Cited by 120 · cited 1×
“(9.456×10-9 W/K2)T is the universal quantum of thermal conductance and Alexander A. Balandin, University of California - Riverside (2011) 11 represent the maximum possible conductance per phonon mode [72]. Assuming different CNT diameter d CNT in the range from 1 nm to 3 nm, the extracted K of SW-CNTs was found to cha…”
BackgroundInfluentialCahill, D. G. (2002) · Review of Scientific Instruments · doi:10.1063/1.1505652 · Cited by 118
Optical measurement of thermal transport in suspended carbon nanotubes
Hsu, I.-K., Kumar, R., Bushmaker, A., Cronin, S. B., Pettes, M. T., Shi, L., Brintlinger, T. H., Fuhrer, M. S., & Cumings, J. (2008) · Applied Physics Letters · doi:10.1063/1.2829864 · Cited by 111 · cited 1×
“ins or a high concentration of defects due to processing as suggested in ref. (142). Thermal contact resistance of graphene and CNTs, which can affect the accuracy of measurements and change K values [142, 143, 144], also deserves more thorough consideration. It has been shown that K of isotopically pure bulk diamond…”
BackgroundSilicon carbide nanowires under external loads: An atomistic simulation study
Makeev, M. A., Srivastava, D., & Menon, M. (2006) · Physical Review B · doi:10.1103/physrevb.74.165303 · Cited by 109 · cited 1×
“Although graphene reveals extremely high intrinsic K , its dominant K p component can be efficiently suppressed by using graphene ribbons with rough edges or introducing disorde”
BackgroundHigh‐temperature stability of suspended single‐layer graphene
Kim, K., Regan, W., Geng, B., Alemán, B., Kessler, B., Wang, F., Crommie, M. F., & Zettl, A. K. (2010) · physica status solidi (RRL) - Rapid Research Letters · doi:10.1002/pssr.201000244 · Cited by 105 · cited 1×
“nhance thermal diffusivity of epoxy to D T ~60 mm 2/s at 70 vol% [114]. An important characteristic for TIM applications of graphene is its high temperature stability, which was verified up to 2600 K [115]. The use of liquid-phase exfoliated graphene [116] in advanced TIMs can become the first industry application, wh…”
BackgroundTheory of the evolution of phonon spectra and elastic constants from graphene to graphite
Michel, K. H., & Verberck, B. (2008) · Physical Review B · doi:10.1103/physrevb.78.085424 · Cited by 104 · cited 1×
“4 8 r 1. 0)u10 6 (K-1) for T<300 K, which switches sign at T≈900 K for SLG and T≈400 K for BLG [135]. These properties are rooted in the intricacies of the phonon dispersion in graphene and FLG [83, 135, 136, 137, 138]. One can expect that graphene thermal properties can be strain-engineered in a way similar to ele…”
BackgroundHeat Conduction in a Three Dimensional Anharmonic Crystal
Saito, K., & Dhar, A. (2010) · Physical Review Letters · doi:10.1103/physrevlett.104.040601 · Cited by 101 · cited 2×
“Experimentally observed evolution of heat conduction in FLG with n varying from 1 to n ~4 [74] is in qualitative agreement with the theory for the crystal lattices described by the Fermi-Pasta-Ulam Hamiltonians [56].”
BackgroundMethodHartmann, J., Voigt, P., & Reichling, M. (1997) · Journal of Applied Physics · doi:10.1063/1.364329 · Cited by 100 · cited 1×
“rystalline diamond (p-D) films – ultrananocrystalline (UNCD), nanocrystalline (NCD) and microcrystalline (MCD) (Figure 2b) – renewed interest to their thermal properties [43, 44]. Most studies of p-D [45, 46, 47, 48, 49, 50, 51] agree that K depends strongly on the grain size D and cover the range from ~1-10 W/mK in U…”
BackgroundLiu, W. L., Shamsa, M., Calizo, I., Balandin, A. A., Ral'chenko, V. G., Popovich, A. F., & Saveliev, A. V. (2006) · Applied Physics Letters · doi:10.1063/1.2364130 · Cited by 97
Self-citationIn-plane lattice thermal conductivity of a quantum-dot superlattice
Khitun, A., Balandin, A. A., Liu, J., & Wang, K. L. (2000) · Journal of Applied Physics · doi:10.1063/1.373723 · Cited by 97
Self-citationIsotope Effect on the Thermal Conductivity of Graphene
Zhang, H., Lee, G., da Fonseca, A. F., Borders, T. L., & Cho, K. (2010) · Journal of Nanomaterials · doi:10.1155/2010/537657 · Cited by 88 · cited 1×
“t K of isotopically pure bulk diamond and Si can be substantially improved as compared to their natural abundance [145- 146]. The isotope effects in graphene have been considered only computationally [83, 147] and await experimental investigation. Finally, the rise of graphene [13] renewed interest to other carbon all…”
BackgroundHeat Conduction in Two-Dimensional Nonlinear Lattices
Lippi, A., & Livi, R. (2000) · Journal of Statistical Physics · doi:10.1023/a:1018721525900 · Cited by 84 · cited 4×
“The high-quality suspended FLG also made possible experimental testing of theoretical results obtained for heat conduction in 2D lattices [56-60].”
BackgroundMethodResultInfluentialEffect of charged impurities on the thermoelectric power of graphene near the Dirac point
Wang, D., & Shi, J. (2011) · Physical Review B · doi:10.1103/physrevb.83.113403 · Cited by 84 · cited 1×
“der scattering without substantial deterioration of electron transport [126]. Graphene, with intentionally introduced lattice disorder, e.g. via electron beam irradiation [127], or charged impurities [128] can become an option for TE energy conversion. Graphene reveals interesting TE effects, it has high S compared to…”
BackgroundThermal conductivity of ultrathin tetrahedral amorphous carbon films
Balandin, A. A., Shamsa, M., Liu, W. L., Casiraghi, C., & Ferrari, A. C. (2008) · Applied Physics Letters · doi:10.1063/1.2957041 · Cited by 83
Self-citationTHERMAL CONDUCTIVITY OF InAs/ AlSb SUPERLATTICES
Borca‐Tasciuc, D. (2001) · Microscale Thermophysical Engineering · doi:10.1080/108939501753222896 · Cited by 73
Thermal conductivity of nitrogenated ultrananocrystalline diamond films on silicon
Shamsa, M., Ghosh, S., Calizo, I., Ral'chenko, V. G., Popovich, A. F., & Balandin, A. A. (2008) · Journal of Applied Physics · doi:10.1063/1.2907865 · Cited by 68
Self-citationHuang, Z., Fisher, T. S., & Murthy, J. Y. (2010) · Journal of Applied Physics · doi:10.1063/1.3499347 · Cited by 64 · cited 1×
“n the last few years, a number of MD studies, with Tersoff and Brenner potentials, addressed heat conduction in graphene nanoribbons (GNR) with various length, edge roughness and defect concentration [84, 85, 86, 87, 88, 89, 90, 91]. A recent MD study found K≈8000 - 10000 W/mK at RT for square graphene sheet, which wa…”
BackgroundSimulation insights into thermally conductive graphene-based nanocomposites
Konatham, D., Bui, K., Papavassiliou, D. V., & Striolo, A. (2010) · Molecular Physics · doi:10.1080/00268976.2010.533707 · Cited by 62
Diamondlike properties in a single phase carbon nitride solid
Zhang, Z. J., Fan, S., Huang, J., & Lieber, C. M. (1996) · Applied Physics Letters · doi:10.1063/1.116317 · Cited by 60
High-temperature thermal conductivity of porous Al2O3 nanostructures
Braginsky, L., Shklover, V., Hofmann, H., & Bowen, P. (2004) · Physical Review B · doi:10.1103/physrevb.70.134201 · Cited by 59 · cited 1×
“8 [53], which involves phonon transmission through grain boundaries, gave good agreement for p-D with different D (Figure 2c).”
BackgroundWei, D., Song, Y., & Wang, F. (2011) · The Journal of Chemical Physics · doi:10.1063/1.3589163 · Cited by 58
Heat transfer between weakly coupled systems: Graphene on a-SiO 2
Persson, B. N. J., & Ueba, H. (2010) · Europhysics Letters (EPL) · doi:10.1209/0295-5075/91/56001 · Cited by 45 · cited 1×
“5×10 7 (W/m 2 K) [103].”
Enhancement of phonon-drag thermopower in bilayer graphene
Kubakaddi, S. S., & Bhargavi, K. S. (2010) · Physical Review B · doi:10.1103/physrevb.82.155410 · Cited by 42 · cited 1×
“esults [100] for Seebeck coefficient S ranging from ~10 to ~100 V/K for T from ~100 to ~300 K. The theoretical studies of the phonondrag effects on TEP in bilayer graphene revealed higher S at low T [123]. The efficiency of TE energy conversion is determined by the figure-of-merit ZT=S2T/(K e +K p ). Moderate values o…”
BackgroundThermoelectric power in graphene
Bao, W., Liu, S. Y., & Lei, X. L. (2010) · Journal of Physics Condensed Matter · doi:10.1088/0953-8984/22/31/315502 · Cited by 39
Hurler, W., Pietralla, M., & Hammerschmidt, A. (1995) · Diamond and Related Materials · doi:10.1016/0925-9635(94)00259-2 · Cited by 39
Finite Heat Conduction in a 2D Disorder Lattice
Yang, L. (2002) · Physical Review Letters · doi:10.1103/physrevlett.88.094301 · Cited by 38
Goyal, V., Subrina, S., Nika, D. L., & Balandin, A. A. (2010) · Applied Physics Letters · doi:10.1063/1.3463455 · Cited by 34 · cited 1×
“It has been shown that composite Si/polycrystalline diamond substrates, which are more thermally resistive at room temperature, outperform Si wafers at elevated temperatures (above ∼360 K), which are characteristic for the operation of electronic device”
BackgroundSelf-citationWoodcraft, A. L., Barucci, M., Hastings, P. R., Lolli, L., Martelli, V., Risegari, L., & Ventura, G. (2009) · Cryogenics · doi:10.1016/j.cryogenics.2008.10.024 · Cited by 32 · cited 1×
“This difference is explained by the fact that HOPG is made from large crystallites, which are well aligned with each other, so that the overall behaviour is similar to that of a single crysta”
BackgroundNonlinear dc transport in graphene
Bao, W., Liu, S., Lei, X. L., & Wang, C. M. (2009) · Journal of Physics Condensed Matter · doi:10.1088/0953-8984/21/30/305302 · Cited by 29 · cited 1×
“igh carrier density n 0 , but saturates at low densities. TEP scales with the normalized temperature T/T F and does not depend on the impurity densities (T F is Fermi temperature) [121]. Calculations [122] reproduced experimental results [100] for Seebeck coefficient S ranging from ~10 to ~100 V/K for T from ~100 to ~…”
Thermal conduction in metalized tetrahedral amorphous carbon (ta–C) films on silicon
Chen, G. Z., Hui, P., & Xu, S. (2000) · Thin Solid Films · doi:10.1016/s0040-6090(99)01097-4 · Cited by 29 · cited 2×
“ghest values of thermal conductivity of graphene were measured with the Raman optothermal technique. It is difficult to compare directly its accuracy with that of the thermal-bridge or 3- techniques [21, 39, 40, 41, 42] when the latter are applied to graphene. The Raman technique used for graphene [16-17, 74-77] has a…”
BackgroundMethod末宗, 康. (1976) · 日本物理學會誌 · Cited by 24
Phonon Transport in Suspended Single Layer GraphenePreprint
Xu, X., Wang, Y., Zhang, K., Zhao, X., Bae, S., Heinrich, M., Bui, C. T., Xie, R., Thong, J. T. L., Hong, B. H., et al. (2010) · arXiv (Cornell University) · doi:10.48550/arxiv.1012.2937 · Cited by 24
Thermal Properties of Graphene: Applications in Thermal Interface Materials
Shahil, K. M. F., Goyal, V., & Balandin, A. A. (2011) · ECS Transactions · doi:10.1149/1.3569911 · Cited by 22
Self-citationLocal variation of room-temperature thermal conductivity in high-quality polycrystalline diamond
Reichling, M., Klotzbücher, T., & Hartmann, J. (1998) · Applied Physics Letters · doi:10.1063/1.121991 · Cited by 15 · cited 1×
“rystalline diamond (p-D) films – ultrananocrystalline (UNCD), nanocrystalline (NCD) and microcrystalline (MCD) (Figure 2b) – renewed interest to their thermal properties [43, 44]. Most studies of p-D [45, 46, 47, 48, 49, 50, 51] agree that K depends strongly on the grain size D and cover the range from ~1-10 W/mK in U…”
BackgroundThermal properties of char obtained by pyrolysis: A molecular dynamics simulation study
Makeev, M. A., & Srivastava, D. (2009) · Applied Physics Letters · doi:10.1063/1.3249632 · Cited by 14
Collected Papers of P.L. Kapitza
(1967) · Elsevier eBooks · doi:10.1016/c2013-0-02004-x · Cited by 11
THERMAL CONDUCTIVITY OF GRAPHITE
Garth, R. C., & Sailor, V. L. (1949) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · Cited by 10
Heat Transfer between Weakly Coupled SystemsPreprint
Persson, B. N. J., Волокитин, А. И., & Ueba, H. (2010) · arXiv (Cornell University) · doi:10.48550/arxiv.1008.4488 · Cited by 4
Thermal conductance at the graphene-SiO2 interface measured by optical pump-probe spectroscopyPreprint
Mak, K. F., Lui, C. H., & Heinz, T. F. (2010) · arXiv (Cornell University) · doi:10.48550/arxiv.1009.0231 · Cited by 4 · cited 2×
“[99-100], and optical pump-and-probe [101] methods.”
ResultYan, Z. H., Liu, G., Khan, J. M., Yu, J. Z., Subrina, S., & Balandin, A. A. (2011) · MRS Proceedings · doi:10.1557/opl.2011.1348 · Cited by 4
Self-citationThermal Properties of Graphene: Applications in Thermal Interface Materials
Balandin, A. A. (2011) · ECS Meeting Abstracts · doi:10.1149/ma2011-01/18/1196 · Cited by 3
Self-citationZamponi, N. (2011) · Cited by 2
Research works printed but not linked: 5
- Balandin, A. A. Better computing through CPU cooling. IEEE Spectrum 29–33 (October, 2009).
- Ioffe, A. F. Semiconductor Thermoelements and Thermal Cooling (Nauka, 1956).
- Ghosh, S. et al. Thermal properties of polycrystalline graphene films and reduced graphene-oxide films. MRS Proc. S6.2, 198 (2010).
- Klemens, P. G. Solid State Physics Vol. 7 (eds Seitz, F. & Turnbull, D.) 1–98 (Academic, 1958).
- Pierson, H. O. Handbook of Carbon, Graphite, Diamonds and Fullerenes: Processing, Properties and Applications (Noyes Publications, 2010).
Cited by
Novoselov, K. S., Fal′ko, V. I., Colombo, L., Gellert, P. R., Schwab, M. G., & Kim, K. (2012) · Nature · doi:10.1038/nature11458 · Cited by 9,251
Science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems
Ferrari, A. C., Bonaccorso, F., Fal'ko, V., Novoselov, K. S., Roche, S., Bøggild, P., Borini, S., Koppens, F. H. L., Palermo, V., Pugno, N., et al. (2015) · Nanoscale · doi:10.1039/c4nr01600a · Cited by 3,027
Georgakilas, V., Perman, J. A., Tucek, J., & Zboril, R. (2015) · Chemical Reviews · doi:10.1021/cr500304f · Cited by 2,147
Nanoscale thermal transport. II. 2003–2012
Cahill, D. G., Braun, P. V., Chen, G., Clarke, D. R., Fan, S., Goodson, K. E., Keblinski, P., King, W. P., Mahan, G. D., Majumdar, A., et al. (2014) · Applied Physics Reviews · doi:10.1063/1.4832615 · Cited by 1,763
A review on mechanical exfoliation for the scalable production of graphene
Yi, M., & Shen, Z. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00252d · Cited by 1,736
Metadata
- Authors
- Balandin, A. A.
- Affiliations
- University of California, Riverside (US)
- Corresponding author
- Balandin, Alexander A.
- Venue
- Nature Materials
- Published
- 2011-07-22
- Volume
- 10
- Issue
- 8
- Pages
- 569-581
- ISSN
- 1476-1122 (ISSN-L)
- 1476-4660
- OpenAlex
- W2057626905
- Cited by
- 6,244
- References
- 164
- Citations by year
- 2026: 307 · 2025: 382 · 2024: 396 · 2023: 368 · 2022: 430 · 2021: 546 · 2020: 538 · 2019: 541 · 2018: 489 · 2017: 493 · 2016: 448 · 2015: 415 · 2014: 356 · 2013: 288 · 2012: 221
- FWCI
- 139.37
- Type
- journal article
- Language
- en
- Open access
- green
- arxiv.org
- Licence
- www.springer.com/tdm (tdm)
- www.springer.com/tdm (vor)
- Locations
- Nature Materials (publishedVersion)
- PubMed (publishedVersion)
- arXiv (Cornell University) (submittedVersion)
- arXiv (Cornell University)
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Thermal properties of materials
- Physical Sciences › Materials Science › Materials Chemistry › Graphene research and applications
- Physical Sciences › Materials Science › Materials Chemistry › Carbon Nanotubes in Composites
- Keywords
- graphene, thermal conductivity, carbon nanotubes, carbon nanomaterials, two-dimensional crystals, electronics cooling, heat removal, carbon allotropes
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.