The conflicts between strength and toughness
The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Abstract
The attainment of both strength and toughness is a vital requirement for most structural materials; unfortunately these properties are generally mutually exclusive. Although the quest continues for stronger and harder materials, these have little to no use as bulk structural materials without appropriate fracture resistance. It is the lower-strength, and hence higher-toughness, materials that find use for most safety-critical applications where premature or, worse still, catastrophic fracture is unacceptable. For these reasons, the development of strong and tough (damage-tolerant) materials has traditionally been an exercise in compromise between hardness versus ductility. Drawing examples from metallic glasses, natural and biological materials, and structural and biomimetic ceramics, we examine some of the newer strategies in dealing with this conflict. Specifically, we focus on the interplay between the mechanisms that individually contribute to strength and toughness, noting that these phenomena can originate from very different lengthscales in a material's structural architecture. We show how these new and natural materials can defeat the conflict of strength versus toughness and achieve unprecedented levels of damage tolerance within their respective material classes.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Cavitation that frequently observed during stretching was also suppressed due to side constraints according to Ref [27].”
From Simultaneously Toughening and Strengthening of PLA-b-PCL Copolymer via Pressure-induced-flow Processing at Room Temperature (2018) · cites this paper as [27]
In the citing paper
“Polyesterbased TPEs are attractive because of their degradability and synthetic versatility, 5-10 yet they suffer from a fundamental trade-off: enhancing tensile strength often reduces elasticity, while improving stretchability typically compromises strength.11,12”
From Metal-Free Synthesis of Tough PLLA- b -PCVL- b -PLLA Triblock Polyester Thermoplastic Elastomers from Mixed Monomers (2026) · cites this paper as [11]
Citations
Cites
THE MATERIAL BONE: Structure-Mechanical Function Relations
Weiner, S., & Wagner, H. D. (1998) · Annual Review of Materials Science · doi:10.1146/annurev.matsci.28.1.271 · Cited by 2,724
Nabarro, F. R. N., Duesbery, M. S., Hirth, J. P., & Kubin, L. P. (1979) · Cited by 2,675
Freezing as a Path to Build Complex Composites
Deville, S., Saiz, E., Nalla, R. K., & Tomsia, A. P. (2006) · Science · doi:10.1126/science.1120937 · Cited by 1,900
Tough, Bio-Inspired Hybrid Materials
Munch, E., Launey, M. E., Alsem, D. H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2008) · Science · doi:10.1126/science.1164865 · Cited by 1,822 · cited 1×
“Recently, synthetic, yet bioinspired, bulk ceramic materials have been made in the image of the nacre structur”
BackgroundSelf-citationPerspective on the Development of High‐Toughness Ceramics
Evans, A. G. (1990) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1990.tb06493.x · Cited by 1,625 · cited 1×
“A prime example of this is in brittle materials such as ceramics, which invariably cannot be toughened by promoting plasticit”
BackgroundDesigning metallic glass matrix composites with high toughness and tensile ductility
Hofmann, D. C., Suh, J.-Y., Wiest, A., Duan, G., Lind, M.-L., Demetriou, M. D., & Johnson, W. L. (2008) · Nature · doi:10.1038/nature06598 · Cited by 1,501
On the Fracture Toughness of Advanced Materials
Launey, M. E., & Ritchie, R. O. (2009) · Advanced Materials · doi:10.1002/adma.200803322 · Cited by 967
Self-citationRitchie, R. O. (1988) · Materials Science and Engineering: A · doi:10.1016/0025-5416(88)90547-2 · Cited by 874
Self-citationDeformation mechanisms in nacre
Wang, R. Z., Suo, Z., Evans, A. G., Yao, N., & Aksay, I. A. (2001) · Journal of Materials Research · doi:10.1557/jmr.2001.0340 · Cited by 835 · cited 1×
“, the frictional motion between mineral platelets in seashell”
BackgroundOn the Mechanistic Origins of Toughness in Bone
Launey, M. E., Buehler, M. J., & Ritchie, R. O. (2010) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070909-104427 · Cited by 741 · cited 1×
“The origin of the intrinsic (plastic deformation) mechanisms tends to be on the smaller, submicrometre lengthscales, akin to the nanometre scale of dislocation Burgers' vectors in metals, whereas the processes of extrinsic toughening and fracture occur on much coarser lengthscales typically well into the micrometre ra…”
BackgroundSelf-citation
Research works printed but not linked: 1
- Sarikaya, M. & Aksay, I. A. in Results and Problems in Cell Differentiation Vol. 19 (ed. Case, S.) Ch. 1 (Springer, 1992).
Cited by
Items 901–1,000 of 1,006
Huang, Z., Wang, M., Feng, Y., & Qu, J. (2021) · Macromolecules · doi:10.1021/acs.macromol.1c00530 · Cited by 46
Jia, Z., Fernandes, M. C., Deng, Z., Yang, T., Zhang, Q., Alfie, L., Yin, J., Lee, J., Lin Han, B., Weaver, J. C., et al. (2021) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2101017118 · Cited by 46
Yang, K., Li, Y., Hong, Z., Du, S., Ma, T., Liu, S., & Jin, X. (2021) · Materials Science and Engineering A · doi:10.1016/j.msea.2021.141517 · Cited by 46
Anstey, A., Tuccitto, A. V., Lee, P., & Park, C. B. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c13836 · Cited by 50
Gregory, G. L., & Williams, C. K. (2022) · Macromolecules · doi:10.1021/acs.macromol.2c00068 · Cited by 47
Analysing fracture properties of bio-inspired 3D printed suture structures
Wickramasinghe, S., Peng, C., Ladani, R. B., & Tran, P. (2022) · Thin-Walled Structures · doi:10.1016/j.tws.2022.109317 · Cited by 46
Recent advances in nanomechanical and in situ testing techniques: Towards extreme conditions
Kiener, D., Wurmshuber, M., Alfreider, M., Schaffar, G. J. K., & Maier‐Kiener, V. (2023) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2023.101108 · Cited by 47
Bottom‐Up Film‐to‐Bulk Assembly Toward Bioinspired Bulk Structural Nanocomposites
Chen, S., Zhang, Z., Gao, H., & Yu, S. (2024) · Advanced Materials · doi:10.1002/adma.202313443 · Cited by 45
Glass science behind lithium silicate glass-ceramics
Lohbauer, U., Fabris, D. C. N., Lubauer, J., Abdelmaseh, S., Cicconi, M. R., Hurle, K., de Ligny, D., Goetz‐Neunhoeffer, F., & Belli, R. (2024) · Dental Materials · doi:10.1016/j.dental.2024.03.006 · Cited by 45
Sun, J., Li, H., Chen, Y., & An, X. (2024) · Advanced Science · doi:10.1002/advs.202407283 · Cited by 47
Quantitative biomimetics of high-performance materials
Yang, M., & Kotov, N. A. (2024) · Nature Reviews Materials · doi:10.1038/s41578-024-00753-3 · Cited by 56
“The discontinuity of mechanical properties manifests as a discontinuity of cracks in the normal direction to the interface 107 .”
Tan, J., Wang, G., Liu, Z. Y., Bednarčík, J., Gao, Y., Zhai, Q., Mattern, N., & Eckert, J. (2014) · Scientific Reports · doi:10.1038/srep03897 · Cited by 45
Smith, C. M., Jiang, D., Gong, J., & Yin, L. (2014) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2014.09.015 · Cited by 45
Abraham, A. C., Agarwalla, A., Yadavalli, A., Liu, J. Y., & Tang, S. Y. (2016) · Bone · doi:10.1016/j.bone.2016.03.013 · Cited by 46
A novel Si/Sn composite with entangled ribbon structure as anode materials for lithium ion battery
Wu, J., Zhu, Z., Zhang, H., Fu, H., Li, H., Wang, A., & Zhang, H. (2016) · Scientific Reports · doi:10.1038/srep29356 · Cited by 45
Zhang, Z., Shi, S., Lin, Q., Wang, L., Liu, Z., Li, P., & Chen, X. (2018) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2018.02.034 · Cited by 49
Tough and deformable glasses with bioinspired cross-ply architectures
Zhen, Y., Dastjerdi, A. K., & Barthelat, F. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.05.012 · Cited by 51
Ubaid, J., Wardle, B. L., & Kumar, S. (2018) · Scientific Reports · doi:10.1038/s41598-018-31819-2 · Cited by 48
Fatigue resistance of nanotwinned high-entropy alloy films
Huo, W., Fang, F., Liu, X., Tan, S., Xie, Z., & Jiang, J. (2018) · Materials Science and Engineering A · doi:10.1016/j.msea.2018.09.112 · Cited by 45
Yan, J., Xu, H., Zuo, X., Jia, T., & Wang, E. (2018) · Materials Science and Engineering A · doi:10.1016/j.msea.2018.10.036 · Cited by 45
Mechanics of Arthropod Cuticle-Versatility by Structural and Compositional Variation
Politi, Y., Bar‐On, B., & Fabritius, H. (2019) · Springer series in materials science · doi:10.1007/978-3-030-11942-3_10 · Cited by 49
Oxidative Kerogen Degradation: A Potential Approach to Hydraulic Fracturing in Unconventionals
Hull, K. L., Jacobi, D., & Abousleiman, Y. (2019) · Energy & Fuels · doi:10.1021/acs.energyfuels.9b00104 · Cited by 45
Si, L., Lu, Z., Yao, C., Ma, Q., Zhao, Y., Wang, Y., Wang, D., & Jin, Z. (2020) · Journal of Materials Science · doi:10.1007/s10853-020-04412-0 · Cited by 47
Residual stress as a fracture toughening mechanism: A Phase-Field study on a brittle material
Salvati, E. (2021) · Theoretical and Applied Fracture Mechanics · doi:10.1016/j.tafmec.2021.103021 · Cited by 45
Xi, P., Quan, F., Sun, Y., & Jiang, Y. (2022) · Composites Part B Engineering · doi:10.1016/j.compositesb.2022.110078 · Cited by 45
Belli, R., Petschelt, A., & Lohbauer, U. (2014) · Dental Materials · doi:10.1016/j.dental.2014.01.009 · Cited by 45
“[19] Ritchie RO.”
BackgroundSong, Z., Ni, Y. Z., Peng, L., Liang, H., & He, L. (2016) · Scientific Reports · doi:10.1038/srep23724 · Cited by 48
Guo, R., Hu, Z., Shaga, A., & Shen, P. (2022) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2022.107347 · Cited by 45
Strong and ductile CrCoNi medium-entropy alloy via dispersed heterostructure
Wang, Y., Ma, X., Guo, F., Zhao, Z., Huang, C., Zhu, Y. T., & Wei, Y. (2023) · Materials & Design · doi:10.1016/j.matdes.2023.111593 · Cited by 44
Su, Y., Shi, S., Wang, C., Wang, Z., Li, P., Zhang, S., Fei, B., Yang, Z., & Hu, J. (2024) · Nano Today · doi:10.1016/j.nantod.2024.102188 · Cited by 44
Tough and Ductile Architected Nacre‐Like Cementitious Composites
Gupta, S., Esmaeeli, H. S., & Moini, R. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202313516 · Cited by 65
Blueprints of Architected Materials: A Guide to Metamaterial Design for Tissue Engineering
Kalogeropoulou, M., Kracher, A., Fucile, P., Mihaila, S. M., & Moroni, L. (2024) · Advanced Materials · doi:10.1002/adma.202408082 · Cited by 48
Shahsavari, R., & Sakhavand, N. (2015) · Carbon · doi:10.1016/j.carbon.2015.08.106 · Cited by 44
Nature of crack-tip plastic zone in metallic glasses
Chen, Y., & Dai, L. H. (2015) · International Journal of Plasticity · doi:10.1016/j.ijplas.2015.10.004 · Cited by 44
“…the crack tip such as shear banding and crack branching, and thus results in different characteristic fracture morphologies (Lewandowski et al., 2005; Xi et al., 2005;Wang et al., 2006; Tandaiya et al., 2009; Xu et al., 2010; Ritchie, 2011; Wu et al., 2011; He et al., 2012; Narayan et al., 2014).”
BackgroundJohnson, J. C., Wanasekara, N. D., & Korley, L. T. J. (2014) · Journal of Materials Chemistry B · doi:10.1039/c3tb21476a · Cited by 44
Fabrication of tougher ZTA ceramics with sustainable high hardness through (RSM) optimisation
Sktani, Z. D. I., Rejab, N. A., Ratnam, M. M., & Ahmad, Z. A. (2018) · International Journal of Refractory Metals and Hard Materials · doi:10.1016/j.ijrmhm.2018.03.006 · Cited by 44
Rate-related study on the ply orientation of carbon fiber reinforced epoxy composite laminates
Zhang, Z., Hou, S., Mao, Y., He, L., & Han, X. (2020) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2020.105968 · Cited by 44
Predictive fatigue crack growth law of high-strength steels
Li, H. F., Zhang, P., Wang, B., & Zhang, Z. F. (2021) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2021.04.042 · Cited by 44
The spider cuticle: a remarkable material toolbox for functional diversity
Politi, Y., Bertinetti, L., Fratzl, P., & Barth, F. G. (2021) · Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rsta.2020.0332 · Cited by 48
“The fracture mechanics of the cuticle is governed by various toughening mechanisms across the structural hierarchy [23] that include multiple interfaces such as chitin–protein and protein– protein interactions, interactions between fibrils, between layers with different architecture (e.”
BackgroundInvestigate the Mode I Fracture Characteristics of Granite After Heating/-LN2 Cooling Treatments
Shao, Z., Sun, L., Aboayanah, K. R., Liu, Q., & Grasselli, G. (2022) · Rock Mechanics and Rock Engineering · doi:10.1007/s00603-022-02893-w · Cited by 43
“The fracture toughness (KIC) is one of the most crucial rock material property characterizing the material’s resistance to crack initiation and propagation (Guo et al. 2021; Ritchie 2011).”
Background60 years of dislocations in ceramics: A conceptual framework for dislocation mechanics in ceramics
Porz, L. (2022) · International Journal of Ceramic Engineering & Science · doi:10.1002/ces2.10150 · Cited by 43
Ma, L., Zhang, X., Duan, Y., Guo, S., Zhao, D., He, C., & Zhao, N. (2022) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2022.10.058 · Cited by 43
Li, Q., Li, X., Jin, C., Li, H., Hua, K., Deng, X., & Wang, H. (2023) · Materials Science and Engineering A · doi:10.1016/j.msea.2023.145037 · Cited by 50
Pan, R. C., Fan, D., Bian, Y. L., Zhao, X., Zhang, N. B., Lu, L., Cai, Y., & Luo, S. (2023) · Materials Science and Engineering A · doi:10.1016/j.msea.2023.145535 · Cited by 43
Liu, X., Feng, P., Ruiz‐Agudo, C., Sun, H., Yu, X., Avaro, J. T., Huang, J., Hou, D., Ran, Q., Hong, J., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202307437 · Cited by 43
Zheng, J., Liu, Y., Wang, Q., Cheng, L., Zhang, C., Zhang, T., Shao, J., & Dai, F. (2024) · Polymer Testing · doi:10.1016/j.polymertesting.2023.108319 · Cited by 43
Liu, J., Wang, X., Zong, X., Ding, X., Xu, H., Yang, F., & Kong, F. (2025) · Acta Materialia · doi:10.1016/j.actamat.2025.120811 · Cited by 43
Qin, S., Liu, Y., Hao, Q., Wang, Y., Chen, N., Zuo, X., & Rong, Y. (2015) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-015-3021-2 · Cited by 43
Thermoset-Cross-Linked Lignocellulose: A Moldable Plant Biomass
Karumuri, S., Hızıroǧlu, S., & Kalkan, A. K. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am508832d · Cited by 44
The Gaussian distribution of lattice size and atomic level heterogeneity in high entropy alloys
Liu, S., & Wei, Y. (2016) · Extreme Mechanics Letters · doi:10.1016/j.eml.2016.10.007 · Cited by 43
Rajasekharan, A. K., Bordes, R., Sandström, C., Ekh, M., & Andersson, M. (2017) · Small · doi:10.1002/smll.201700550 · Cited by 44
Tang, L., Krishnan, N. M. A., Berjikian, J., Rivera, J., Smedskjær, M. M., Mauro, J. C., Zhou, W. H., & Bauchy, M. (2018) · Physical Review Materials · doi:10.1103/physrevmaterials.2.113602 · Cited by 43
Anisotropy of fracture toughness in nanostructured ceramics controlled by grain boundary design
Daniel, R., Meindlhumer, M., Baumegger, W., Todt, J., Zálešák, J., Ziegelwanger, T., Mitterer, C., & Kečkéš, J. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.11.028 · Cited by 45
A novel phase field method for modeling the fracture of long bones
Shen, R., Waisman, H., Yosibash, Z., & Dahan, G. (2019) · International Journal for Numerical Methods in Biomedical Engineering · doi:10.1002/cnm.3211 · Cited by 45
Adiabatic shear band localization in an Al–Zn–Mg–Cu alloy under high strain rate compression
Khan, M. A., Wang, Y., Yasin, G., Nazeer, F., Malik, A., Ahmad, T. J., Khan, W. Q., Nguyen, T. A., Zhang, H., & Afifi, M. A. (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2020.02.024 · Cited by 43
Nutor, R. K., Cao, Q. P., Wang, X. D., Zhang, D., & Jiang, J. Z. (2020) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2020.09.029 · Cited by 43
A universal mechanical framework for noncovalent interface in laminated nanocomposites
He, Z., Zhu, Y., & Wu, H. (2021) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2021.104560 · Cited by 43
Transparent Omniphobic Coating with Glass‐Like Wear Resistance and Polymer‐Like Bendability
Zhang, K., Huang, S., Wang, J., & Liu, G. (2019) · Angewandte Chemie · doi:10.1002/ange.201904210 · Cited by 44
Ductilizing of a brittle as-cast hypereutectic Al–Si alloy by friction stir processing
Rao, A. G., Deshmukh, V. P., Prabhu, N., & Kashyap, B. P. (2015) · Materials Letters · doi:10.1016/j.matlet.2015.07.006 · Cited by 43
“Contemporary high performance structural materials are being established by their superior mechanical properties, particularly, the strength, ductility and toughness [1].”
BackgroundXiong, D., Cao, M., Guo, Q., Tan, Z., Fan, G., Li, Z., & Zhang, D. (2016) · Scientific Reports · doi:10.1038/srep33801 · Cited by 44
Frølich, S., Weaver, J. C., Dean, M. N., & Birkedal, H. (2017) · Advanced Engineering Materials · doi:10.1002/adem.201600848 · Cited by 48
Kim, D., Kim, C., Yang, C.-H., Park, J.-U., Jeong, H.-W., Yim, K.-H., & Hong, H.-U. (2023) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2023.169341 · Cited by 42
High-performance ultra-lean biodegradable Mg–Ca alloys and guidelines for their processing
Akhmetshina, T. G., Berger, L., Basu, I., Montibeller, S., Rubin, W., Rich, A. M., Schäublin, R. E., & Löffler, J. F. (2024) · Acta Materialia · doi:10.1016/j.actamat.2024.120247 · Cited by 44
Nature’s Load-Bearing Design Principles and Their Application in Engineering: A Review
Breish, F., Hamm, C. E., & Andresen, S. (2024) · Biomimetics · doi:10.3390/biomimetics9090545 · Cited by 48
Bhatt, B., Martucci, A., Biamino, S., Ugues, D., Bondioli, F., Montanaro, L., Lombardi, M., & Fino, P. (2025) · Materials & Design · doi:10.1016/j.matdes.2025.113742 · Cited by 46
Fracture toughness of WC-Fe cermet in W-WC-Fe composite by nanoindentation
Cai, X., Xu, Y., Zhong, L., & Liu, M. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.09.070 · Cited by 42
Gu, J., Zhang, L., Ni, S., & Song, M. J. (2017) · Micron · doi:10.1016/j.micron.2017.12.003 · Cited by 42
Yang, L., Shen, P., Guo, R., & Jiang, Q. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.05.163 · Cited by 43
López‐Píriz, R., Cabal, B., Goyos, L., Fernández, A., Bartolomé, J. F., Moya, J. S., & Torrecillas, R. (2019) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36661 · Cited by 48
Dynamic self-strengthening of a bio-nanostructured armor — conch shell
Li, H., Shen, J., Wei, Q., & Li, X. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.109820 · Cited by 42
Unusual plastic deformation behavior of nanotwinned Cu/high entropy alloy FeCoCrNi nanolaminates
Zhao, Y., Zhang, J., Wang, Y. Q., Wu, K., Liu, G., & Sun, J. (2019) · Nanoscale · doi:10.1039/c9nr00836e · Cited by 42
Dalfi, H. K., Katnam, K. B., & Potluri, P. (2019) · Polymer Composites · doi:10.1002/pc.25325 · Cited by 42
Burr, D. B. (2019) · Bone · doi:10.1016/j.bone.2019.07.015 · Cited by 43
“For instance extrinsic toughening mechanisms involve crack bridging (by uncracked “ligaments” and collagen fibers that shield the crack tip and slow its propagation) as well as deflection of cracks around microstructural features that act as barriers to unconstrained crack growth [11, 23] [Figures 1,2].”
BackgroundStrength and plasticity of amorphous ceramics with self-patterned nano-heterogeneities
Ming, K., Gu, C., Su, Q., Xie, D., Wu, Y., Wang, Y., Shao, L., Nastasi, M., & Wang, J. (2020) · International Journal of Plasticity · doi:10.1016/j.ijplas.2020.102837 · Cited by 42
Review of Tailoring Methods for Joints with Additively Manufactured Adherends and Adhesives
Frascio, M., Marques, E. A. S., Carbas, R. J. C., da Silva, L. F. M., Monti, M., & Avalle, M. (2020) · Materials · doi:10.3390/ma13183949 · Cited by 45
“The conflict between strength and toughness is a well-known engineering problem [36], but recent works attempted to address it by developing new materials or material deposition micro bio-inspired patterns [37].”
BackgroundEngineering toughening mechanisms in architectured ceramic-based bioinspired materials
Rahimizadeh, A., Sarvestani, H. Y., Li, L., Robles, J. B., Backman, D. S., LESSARD, L. B., & Ashrafi, B. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.109375 · Cited by 42
Kocich, R., & Kunčická, L. (2021) · Journal of Sandwich Structures & Materials · doi:10.1177/1099636221993886 · Cited by 43
Xi, P., Quan, F., Yao, J., Xia, Y., Fang, K., & Jiang, Y. (2021) · ACS Nano · doi:10.1021/acsnano.1c05952 · Cited by 42
Fracture toughness of fibrin gels as a function of protein volume fraction: Mechanical origins
Garyfallogiannis, K., Ramanujam, R. K., Litvinov, R. I., Yu, T., Nagaswami, C., Bassani, J. L., Weisel, J. W., Purohit, P. K., & Tutwiler, V. J. (2023) · Acta Biomaterialia · doi:10.1016/j.actbio.2022.12.028 · Cited by 50
Structural and Mechanical Characterization of Thermally Treated Conch Shells
Li, H., Jin, D., Li, R., & Li, X. (2015) · JOM · doi:10.1007/s11837-015-1330-y · Cited by 44
Libanori, R., Carnelli, D., Rothfuchs, N., Binelli, M. R., Zanini, M., Nicoleau, L., Feichtenschlager, B., Albrecht, G., & Studart, A. R. (2016) · Bioinspiration & Biomimetics · doi:10.1088/1748-3190/11/3/036004 · Cited by 42
Ceramic composites toughened by vat photopolymerization 3D printing technology
Li, Q., Pan, Z., Liang, J., Zhang, Z., Li, J., Zhou, Y., & Sun, X. (2022) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2022.10.035 · Cited by 41
Preparation and formation mechanism of high-toughness organic polymers modified geopolymers
Xing, X., Wang, B., Luo, S., Lin, F., Wei, J., Xu, W., Hu, J., & Yu, Q. (2024) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2024.105578 · Cited by 44
Jing, J., Yao, B., Sun, W., Chen, J., Xu, J., & Fu, J. (2024) · Angewandte Chemie International Edition · doi:10.1002/anie.202410693 · Cited by 51
Mechanism of oxygen content on impact toughness of α + β powder metallurgy titanium alloy
Gao, S., Pan, K., Chen, D., Wang, B., Wu, S., Luo, X., Sun, M., Zhao, C., & Li, N. (2024) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2024.09.077 · Cited by 41
Yang, J. C., Cao, P., Dou, Q., Guo, L., Li, Y., Zhang, Y., Yan, J., Wang, Q., Xu, Z., Xie, H., et al. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.158459 · Cited by 41
An, F., Zou, S., Liu, J., Zhang, B., Huang, X., Hou, J., Qian, B., Zhang, X., & Lu, W. (2025) · Acta Materialia · doi:10.1016/j.actamat.2025.121375 · Cited by 41
Chu, Y., Zhang, W., Liu, D., Chen, P., Huang, L., You, Y., Luan, S., Li, C., & Fu, Y. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202510461 · Cited by 41
Peptoid nanosheets as soluble, two-dimensional templates for calcium carbonate mineralization
Jun, J. V., Altoé, M. V. P., Aloni, S., & Zuckermann, R. N. (2015) · Chemical Communications · doi:10.1039/c5cc03323c · Cited by 44
Ye, C., Suslov, S., Lin, D. L., Liao, Y., & Cheng, G. J. (2014) · Journal of Applied Physics · doi:10.1063/1.4881555 · Cited by 41
Zhang, H., Scholz, A. K., de Crevoisier, J., Berghezan, D., Narayanan, T., Krämer, E. J., & Creton, C. (2014) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.23651 · Cited by 44
Tough Alumina/Polymer Layered Composites with High Ceramic Content
Livanov, K., Jelitto, H., Bar‐On, B., Schulte, K., Schneider, G. A., & Wagner, D. H. (2014) · Journal of the American Ceramic Society · doi:10.1111/jace.13413 · Cited by 42
Zhang, N., Carrez, P., & Shahsavari, R. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b13107 · Cited by 41
Wang, B., & Sullivan, T. N. (2017) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2017.05.015 · Cited by 44
Costa, É. K. D. C., de Souza, C. O., da Silva, J. B. A., & Druzian, J. I. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.45311 · Cited by 42
Xu, Z. Y., Huang, J., Zhang, C., Daryadel, S., Behroozfar, A., McWilliams, B., Boesl, B., Agarwal, A. K., & Minary‐Jolandan, M. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201700782 · Cited by 41
Khan, M. A., & Kumar, S. (2018) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2018.02.038 · Cited by 41
Strength versus toughness of emulsion templated Poly(Dicyclopentadiene) foams
Kovačič, S., Žagar, E., & Slugovc, C. (2019) · Polymer · doi:10.1016/j.polymer.2019.02.045 · Cited by 41
Enhancement of impact toughness of β-type Ti–Mo alloy by {332}<113> twinning
Yao, K., Min, X., Emura, S., Meng, F., Ji, X. H., & Tsuchiya, K. (2019) · Journal of Materials Science · doi:10.1007/s10853-019-03679-2 · Cited by 41
A simple way to make pre-stressed ceramics with high strength
Bao, Y., Kuang, F., Sun, Y., Li, Y., Wan, D., Shen, Z., Ma, D., & He, L. (2019) · Journal of Materiomics · doi:10.1016/j.jmat.2019.06.001 · Cited by 41
Metadata
- Authors
- Ritchie, R. O.
- Affiliations
- Lawrence Berkeley National Laboratory (US)
- Corresponding author
- Ritchie, Robert O.
- ORCID
- Ritchie, Robert O.
- Venue
- Nature Materials
- Published
- 2011-10-24
- Volume
- 10
- Issue
- 11
- Pages
- 817-822
- ISSN
- 1476-1122 (ISSN-L)
- 1476-4660
- OpenAlex
- W1971974144
- Cited by
- 3,989
- References
- 27
- Citations by year
- 2026: 458 · 2025: 556 · 2024: 474 · 2023: 385 · 2022: 398 · 2021: 332 · 2020: 280 · 2019: 259 · 2018: 242 · 2017: 172 · 2016: 140 · 2015: 120 · 2014: 81 · 2013: 62 · 2012: 30
- FWCI
- 27.12
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- www.springer.com/tdm (vor)
- Locations
- Nature Materials (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Metals and Alloys › Microstructure and mechanical properties
- Physical Sciences › Materials Science › Biomaterials › Calcium Carbonate Crystallization and Inhibition
- Physical Sciences › Materials Science › Metals and Alloys › Metallic Glasses and Amorphous Alloys
- Keywords
- strength-toughness trade-off, damage tolerance, fracture resistance, amorphous alloys, biological materials, advanced ceramics, ductility
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.