The conflicts between strength and toughness
The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Abstract
The attainment of both strength and toughness is a vital requirement for most structural materials; unfortunately these properties are generally mutually exclusive. Although the quest continues for stronger and harder materials, these have little to no use as bulk structural materials without appropriate fracture resistance. It is the lower-strength, and hence higher-toughness, materials that find use for most safety-critical applications where premature or, worse still, catastrophic fracture is unacceptable. For these reasons, the development of strong and tough (damage-tolerant) materials has traditionally been an exercise in compromise between hardness versus ductility. Drawing examples from metallic glasses, natural and biological materials, and structural and biomimetic ceramics, we examine some of the newer strategies in dealing with this conflict. Specifically, we focus on the interplay between the mechanisms that individually contribute to strength and toughness, noting that these phenomena can originate from very different lengthscales in a material's structural architecture. We show how these new and natural materials can defeat the conflict of strength versus toughness and achieve unprecedented levels of damage tolerance within their respective material classes.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Cavitation that frequently observed during stretching was also suppressed due to side constraints according to Ref [27].”
From Simultaneously Toughening and Strengthening of PLA-b-PCL Copolymer via Pressure-induced-flow Processing at Room Temperature (2018) · cites this paper as [27]
In the citing paper
“Polyesterbased TPEs are attractive because of their degradability and synthetic versatility, 5-10 yet they suffer from a fundamental trade-off: enhancing tensile strength often reduces elasticity, while improving stretchability typically compromises strength.11,12”
From Metal-Free Synthesis of Tough PLLA- b -PCVL- b -PLLA Triblock Polyester Thermoplastic Elastomers from Mixed Monomers (2026) · cites this paper as [11]
Citations
Cites
THE MATERIAL BONE: Structure-Mechanical Function Relations
Weiner, S., & Wagner, H. D. (1998) · Annual Review of Materials Science · doi:10.1146/annurev.matsci.28.1.271 · Cited by 2,724
Nabarro, F. R. N., Duesbery, M. S., Hirth, J. P., & Kubin, L. P. (1979) · Cited by 2,675
Freezing as a Path to Build Complex Composites
Deville, S., Saiz, E., Nalla, R. K., & Tomsia, A. P. (2006) · Science · doi:10.1126/science.1120937 · Cited by 1,900
Tough, Bio-Inspired Hybrid Materials
Munch, E., Launey, M. E., Alsem, D. H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2008) · Science · doi:10.1126/science.1164865 · Cited by 1,822 · cited 1×
“Recently, synthetic, yet bioinspired, bulk ceramic materials have been made in the image of the nacre structur”
BackgroundSelf-citationPerspective on the Development of High‐Toughness Ceramics
Evans, A. G. (1990) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1990.tb06493.x · Cited by 1,625 · cited 1×
“A prime example of this is in brittle materials such as ceramics, which invariably cannot be toughened by promoting plasticit”
BackgroundDesigning metallic glass matrix composites with high toughness and tensile ductility
Hofmann, D. C., Suh, J.-Y., Wiest, A., Duan, G., Lind, M.-L., Demetriou, M. D., & Johnson, W. L. (2008) · Nature · doi:10.1038/nature06598 · Cited by 1,501
On the Fracture Toughness of Advanced Materials
Launey, M. E., & Ritchie, R. O. (2009) · Advanced Materials · doi:10.1002/adma.200803322 · Cited by 967
Self-citationRitchie, R. O. (1988) · Materials Science and Engineering: A · doi:10.1016/0025-5416(88)90547-2 · Cited by 874
Self-citationDeformation mechanisms in nacre
Wang, R. Z., Suo, Z., Evans, A. G., Yao, N., & Aksay, I. A. (2001) · Journal of Materials Research · doi:10.1557/jmr.2001.0340 · Cited by 835 · cited 1×
“, the frictional motion between mineral platelets in seashell”
BackgroundOn the Mechanistic Origins of Toughness in Bone
Launey, M. E., Buehler, M. J., & Ritchie, R. O. (2010) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070909-104427 · Cited by 741 · cited 1×
“The origin of the intrinsic (plastic deformation) mechanisms tends to be on the smaller, submicrometre lengthscales, akin to the nanometre scale of dislocation Burgers' vectors in metals, whereas the processes of extrinsic toughening and fracture occur on much coarser lengthscales typically well into the micrometre ra…”
BackgroundSelf-citation
Research works printed but not linked: 1
- Sarikaya, M. & Aksay, I. A. in Results and Problems in Cell Differentiation Vol. 19 (ed. Case, S.) Ch. 1 (Springer, 1992).
Cited by
Items 801–900 of 1,006
The quest for stiff, strong and tough hybrid materials: an exhaustive exploration
Barthelat, F., & Mirkhalaf, M. (2013) · Journal of The Royal Society Interface · doi:10.1098/rsif.2013.0711 · Cited by 53
“How to tune these parameters for optimum performance represents a fascinating and highly relevant problem in materials science [3,4].”
BackgroundLarge-scale parallel alignment of platelet-shaped particles through gravitational sedimentation
Behr, S., Vainio, U., Müller, M., Schreyer, A. G., & Schneider, G. A. (2015) · Scientific Reports · doi:10.1038/srep09984 · Cited by 55
Cymbiola nobilis shell: Toughening mechanisms in a crossed-lamellar structure
Ji, H., Li, X., & Chen, D. L. (2017) · Scientific Reports · doi:10.1038/srep40043 · Cited by 52
Nacre-like ceramic refractories for high temperature applications
Pelissari, P. I. B. G. B., Bouville, F., Pandolfelli, V. C., Carnelli, D., Giuliani, F., da Luz, A. P., Saiz, E., & Studart, A. R. (2017) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2017.10.042 · Cited by 51
“The reduced toughness of ceramics can be handled by approaches that induce extrinsic crack arresting mechanisms, which act at the crack wake, inhibiting or slowing down its propagation [3].”
BackgroundChen, X., Tao, J., Yi, J., Li, C., Bao, R., Liu, Y., You, X., & Tan, S. (2017) · Materials Science and Engineering A · doi:10.1016/j.msea.2017.12.044 · Cited by 51
Dang, C., Yao, Y., Olugbade, T. O., Li, J., & Wang, L. (2018) · Thin Solid Films · doi:10.1016/j.tsf.2018.03.029 · Cited by 51
Nitrogen Interstitial Alloying of CoCrFeMnNi High Entropy Alloy through Reactive Powder Milling
Moravčík, I., Čížek, J., Moravcikova-Gouvea, L., Čupera, J., Gubán, I., & Dlouhý, I. (2019) · Entropy · doi:10.3390/e21040363 · Cited by 51
“The need for safety critical application materials with improved combination of high strength, low density, and high fracture resistance has been stimulating research efforts for decades [1].”
BackgroundChen, X., Gao, H., Hu, Y., & Hu, G. (2019) · Composite Structures · doi:10.1016/j.compstruct.2019.111365 · Cited by 51
Wang, Y. Q., Fritz, R., Kiener, D., Zhang, J. Y., Liu, G., Kolednik, O., Pıppan, R., & Sun, J. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.09.002 · Cited by 51
Sha, C., Zhou, Z., Xie, Z., & Munroe, P. R. (2020) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2020.125435 · Cited by 51
Wang, J., Zhao, Y., Zhou, W. Q., Zhao, Q., Lei, C., & Zeng, W. (2021) · Materials Science and Engineering A · doi:10.1016/j.msea.2021.141790 · Cited by 51
Dou, P., Kimura, A., Kasada, R., Okuda, T., Inoue, M., Ukai, S., Ohnuki, S., Fujisawa, T., Abe, F., Jiang, S., et al. (2016) · Journal of Nuclear Materials · doi:10.1016/j.jnucmat.2016.12.001 · Cited by 54
García-Rodríguez, S. M., Costa, J., Rankin, K. E., Boardman, R., Singery, V., & Mayugo, J. A. (2019) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2019.105659 · Cited by 50
İnal, O., Katnam, K. B., Potluri, P., & Soutis, C. (2021) · The Aeronautical Journal · doi:10.1017/aer.2021.95 · Cited by 56
Famkar, E., Pircheraghi, G., & Nazockdast, H. (2021) · Composites Science and Technology · doi:10.1016/j.compscitech.2021.109119 · Cited by 53
Effect of a weak fiber interface coating in ZrB2 reinforced with long SiC fibers
Silvestroni, L., Sciti, D., Hilmas, G. E., Fahrenholtz, W. G., & Watts, J. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.08.105 · Cited by 50
Alignment of layered double hydroxide platelets
Zhang, Y., & Evans, J. (2012) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2012.05.033 · Cited by 54
Nanoconfinement and the Strength of Biopolymers
Giesa, T., & Buehler, M. J. (2013) · Annual Review of Biophysics · doi:10.1146/annurev-biophys-083012-130345 · Cited by 58
Nacre-like materials using a simple doctor blading technique: Fabrication, testing and modeling
Mirkhalaf, M., & Barthelat, F. (2015) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2015.11.010 · Cited by 58
“In particu- lar, these materials combine high strength and high tough- ness (energy absorption), two properties which are very difficult to achieve simultaneously in engineering materials (Ritchie, 2011).”
BackgroundCharacterization of the translaminar fracture Cohesive Law
Ortega, A., Maimí, P., González, E. V., & Trias, D. (2016) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.01.019 · Cited by 50
Roadmap across the mesoscale for durable and sustainable cement paste – A bioinspired approach
Palkovic, S. D., Brommer, D. B., Kupwade‐Patil, K., Mašić, A., Buehler, M. J., & Büyüköztürk, O. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.04.020 · Cited by 56
Liu, X., Wu, K., Wu, G., Gao, Y., Zhu, L., Lü, Y., & Lü, J. (2016) · Scripta Materialia · doi:10.1016/j.scriptamat.2016.07.003 · Cited by 50
Fatigue crack growth anisotropy in ultrafine-grained iron
Leitner, T., Hohenwarter, A., Ochensberger, W., & Pıppan, R. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.12.059 · Cited by 50
“Toward seashells under stress”: Bioinspired concepts to design tough layered ceramic composites
Bermejo, R. (2017) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2017.04.041 · Cited by 54
Tough salami-inspired Cf/ZrB2 UHTCMCs produced by electrophoretic deposition
Galizia, P., Failla, S., Zoli, L., & Sciti, D. (2017) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2017.09.047 · Cited by 50
Natural Biopolymer Alloys with Superior Mechanical Properties
Meng, L., Xie, F., Zhang, B., Wang, D. K., & Yu, L. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b06009 · Cited by 51
An improved crack-bridging model for rigid particle-polymer composites
Meng, Q., & Wang, T. (2019) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2019.02.028 · Cited by 50
Bamboo-Inspired Renewable, High-Strength, Vibration-Damping Composites for Structural Applications
Han, S., Chen, F., Ye, H., Zheng, Z., Chen, L., & Wang, G. (2023) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.2c06490 · Cited by 52
Shim, S. H., Pouraliakbar, H., Kim, Y. K., Lee, B. J., Fallah, V., Kim, Y., Lim, K. R., Na, Y., & Hong, S. I. (2023) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2023.172514 · Cited by 49
Shi, C., Li, X.-D., Zhang, X., & Zou, M. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.152361 · Cited by 49
Robust super-structured porous hydrogel enables bioadaptive repair of dynamic soft tissue
He, S., Liang, W., Tang, Y., Zhang, J., Wang, R., Quan, L., Ouyang, Y., Huang, R., Dou, R., & Wu, D. (2025) · Nature Communications · doi:10.1038/s41467-025-58062-4 · Cited by 49
Transition dynamics and magic-number-like behavior of frictional granular clusters
Tordesillas, A., Walker, D. M., Froyland, G., Zhang, J., & Behringer, R. (2012) · Physical Review E · doi:10.1103/physreve.86.011306 · Cited by 52
High damage-tolerance bio-inspired ZL205A/SiC composites with a lamellar-interpenetrated structure
Shaga, A., Shen, P., Xiao, L., Guo, R., Liu, Y., & Jiang, Q. (2017) · Materials Science and Engineering A · doi:10.1016/j.msea.2017.09.114 · Cited by 50
Oğuz, O., Candau, N., Citak, M. K., Cetin, F. N., Seven, S. A., & Menceloǵlu, Y. Z. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b00319 · Cited by 53
Zhang, Y., Chen, Z., Qu, S., Feng, A., Mi, G., Shen, J., Huang, X., & Chen, D. L. (2020) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2020.06.039 · Cited by 50
Han, X., Wang, Z., Ding, L., Lian, C., Wang, F., Pu, J., & Jiang, S. (2021) · Chinese Chemical Letters · doi:10.1016/j.cclet.2021.03.044 · Cited by 49
Wei, X., Wang, G., Smith, L. M., Chen, X., & Jiang, H. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.12.071 · Cited by 49
Merkel, S., Liermann, H., Miyagi, L., & Wenk, H. R. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.04.068 · Cited by 49
Zhang, C., Wang, Y., Lv, H., Gao, H., Wang, J., & Sun, B. (2021) · Materials Science and Engineering A · doi:10.1016/j.msea.2021.141591 · Cited by 48
Lu, Y., Li, W., Zhou, J., Ren, Y., Wang, X., Li, J., & Zhu, S. (2022) · Composites Communications · doi:10.1016/j.coco.2022.101397 · Cited by 48
Kim, J.-W., Gardner, J. M., Sauti, G., Wincheski, R. A., Jensen, B. D., Wise, K. E., & Siochi, E. J. (2023) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2023.107449 · Cited by 48
Wang, J., Liu, X., Xu, Q. P., Luo, Q., & Xuan, Y. (2023) · DeCarbon · doi:10.1016/j.decarb.2023.100005 · Cited by 50
Liu, X., Zhang, S., Feng, H., Wang, J., Jiang, P., Li, H., Yuan, F., & Wu, X. (2023) · Acta Materialia · doi:10.1016/j.actamat.2023.119079 · Cited by 51
Zeng, H., Jin, M., Li, W., Gao, C., Ma, Y., Guan, Q., & Liu, J. (2024) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2024.134863 · Cited by 48
Li, B., Yakubov, V., Nomoto, K., Ringer, S. P., Gludovatz, B., Li, X., & Kruzic, J. J. (2024) · Acta Materialia · doi:10.1016/j.actamat.2024.119685 · Cited by 48
Tough Hydrogels with Different Toughening Mechanisms and Applications
Xu, Z., Chen, Y., Cao, Y., & Xue, B. (2024) · International Journal of Molecular Sciences · doi:10.3390/ijms25052675 · Cited by 58
“Additionally, there is often a trade-off between strength and toughness in hydrogels, as these properties are mutually exclusive [19].”
BackgroundFan, C., Sun, J., Zhao, J., & Yun, X. (2024) · Ceramics International · doi:10.1016/j.ceramint.2024.07.166 · Cited by 50
Yin, W. H., Xu, F. Y., Ertörer, O., Pan, Z., Zhang, X. Y., Kecskes, L. J., Lavernia, E. J., & Wei, Q. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.03.011 · Cited by 48
Maimí, P., González, E. V., Gascons, N., & Ripoll, L. (2013) · Applied Mechanics Reviews · doi:10.1115/1.4024163 · Cited by 48
Hao, Q., Qin, S., Liu, Y., Zuo, X., Chen, N., Huang, W., & Rong, Y. (2016) · Materials Science and Engineering A · doi:10.1016/j.msea.2016.03.007 · Cited by 48
Kang, J. Y., Kim, J. G., Park, H. W., & Kim, H. S. (2016) · Scientific Reports · doi:10.1038/srep26590 · Cited by 48
Mechanical and biological evaluation of 3D printed 10CeTZP-Al 2 O 3 structures
Goyos, L., García‐Tuñón, E., Fernández-García, E., Díaz, R., Fernández, A., Prado, C., Saiz, E., & Torrecillas, R. (2017) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2017.03.012 · Cited by 50
“In general, ceramic materials are brittle and have virtually no plasticity; however, there are exceptions, such as ceria-stabilized zirconia (CeTZP), which presents an important intrinsic reinforcement mechanism associated to its phase transformation, called transformation toughening [16].”
Zhang, T., Zhang, X., Chen, Y., Duan, Y., & Zhang, J. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b03608 · Cited by 48
Materials-by-design: computation, synthesis, and characterization from atoms to structures
Yeo, J., Jung, G. S., Martín‐Martínez, F. J., Ling, S., Gu, G. X., Qin, Z., & Buehler, M. J. (2018) · Physica Scripta · doi:10.1088/1402-4896/aab4e2 · Cited by 56
“Many engineering materials possess inherently conflicting mechanical properties, such as toughness and strength [25].”
BackgroundVella, J. B., Trombetta, R. P., Hoffman, M. D., Inzana, J. A., Awad, H. A., & Benoit, D. S. W. (2017) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36270 · Cited by 51
Calcite fibre formation in modern brachiopod shells
Roda, M. D. M. S., Griesshaber, E., Ziegler, A., Rupp, U., Yin, X., Henkel, D., Häussermann, V., Laudien, J., Brand, U., Eisenhauer, A., et al. (2019) · Scientific Reports · doi:10.1038/s41598-018-36959-z · Cited by 53
Tough and Osteocompatible Calcium Phosphate Cements Reinforced with Poly(vinyl alcohol) Fibers
Kucko, N. W., Schickert, S. D. L., Marques, T. S., Herber, R., van den Beucken, J. J. J. P., Zuo, Y., & Leeuwenburgh, S. C. G. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b00226 · Cited by 48
Effect of interlocking structure on mechanical properties of bio-inspired nacreous composites
Cui, S., Lu, Z., & Yang, Z. (2019) · Composite Structures · doi:10.1016/j.compstruct.2019.111260 · Cited by 50
Yuan, T., Qu, X., Cui, X., & Sun, J. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b08208 · Cited by 48
PET-RAFT facilitated 3D printable resins with multifunctional RAFT agents
Shi, X., Zhang, J., Corrigan, N. A., & Boyer, C. A. (2020) · Materials Chemistry Frontiers · doi:10.1039/d0qm00961j · Cited by 48
Dynamic mechanical properties and fracturing behaviour of concrete under biaxial compression
Wang, H., Zhao, J. W., Li, J., Liu, K., Braithwaite, C., & Zhang, Q. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.124085 · Cited by 48
Rojas, D. F., Li, H., Orhan, O. K., Shao, C., Hogan, J. D., & Ponga, M. R. (2021) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2021.162309 · Cited by 52
Wu, K., Song, Y., Zhang, X., Zhang, S., Zheng, Z., Gong, X., He, L., Yao, H., & Ni, Y. Z. (2022) · Advanced Science · doi:10.1002/advs.202104867 · Cited by 49
He, J., Feng, S., & Yang, M. (2024) · ACS Nano · doi:10.1021/acsnano.4c04388 · Cited by 50
Zhong, Z., Jiang, X., Sun, H., Wu, Z., Liu, Y., & Matamoros‐Veloza, A. (2024) · Advanced Engineering Materials · doi:10.1002/adem.202401392 · Cited by 49
Experimental study on the impact resistance of fill-enhanced mechanical metamaterials
Wang, W., Yang, H., Zhang, W., Shang, N., & Ma, L. (2024) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2024.109799 · Cited by 58
Toughening and strengthening mechanisms of biological materials: A review
Feng, X., Zhao, Z.-L., Yan, Y., & Zhao, H. (2025) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2025.100988 · Cited by 55
Zhu, B., Xu, X., & Tang, R. (2013) · The Journal of Chemical Physics · doi:10.1063/1.4848696 · Cited by 46
Lu, H., Chen, Z., & Ma, C. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm32763e · Cited by 48
What's Inside the Box? – Length‐Scales that Govern Fracture Processes of Polymer Fibers
Giesa, T., Pugno, N. M., Wong, J. Y., Kaplan, D. L., & Buehler, M. J. (2014) · Advanced Materials · doi:10.1002/adma.201303323 · Cited by 47
Chen, K., Ding, J. J., Zhang, S., Tang, X., Yue, Y., & Guo, L. (2017) · ACS Nano · doi:10.1021/acsnano.6b07932 · Cited by 49
Smirnov, A., Beltrán, J. I., Rodriguez‐Suarez, T., Pecharromán, C., Muñoz, M. C., Moya, J. S., & Bartolomé, J. F. (2017) · Scientific Reports · doi:10.1038/srep44922 · Cited by 47
“In these structural materials strength and toughness are usually considered mutually exclusive 2 .”
A unified and universal Griffith-based criterion for brittle fracture
Huang, K., Shimada, T., Ozaki, N., Hagiwara, Y., Sumigawa, T., Guo, L., & Kitamura, T. (2017) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2017.08.018 · Cited by 47
Nonlinear viscoelasticity of fat crystal networks
Macias‐Rodriguez, B. A., Ewoldt, R. H., & Marangoni, A. G. (2018) · Rheologica Acta · doi:10.1007/s00397-018-1072-1 · Cited by 47
“multiple length scales but also from the incorporation of structural means, namely mineral-platelet sliding in seashells, for relieving locally high stresses (Ritchie 2011).”
BackgroundLiu, J., Zhu, W., Yu, Z., & Wei, X. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.04.031 · Cited by 50
Tadayon, M., Amini, S., Wang, Z., & Miserez, A. (2018) · iScience · doi:10.1016/j.isci.2018.08.022 · Cited by 47
“An ideal spring should be both stiff and extensible to maximize storage of elastic energy, but this brings an inherent material limitation because these characteristics are usually mutually exclusive from a fracture mechanics perspective (Ritchie, 2011; Lawn, 1993).”
BackgroundThe reinforcing effects of dendritic short carbon fibers for rigid polyurethane composites
Ma, R., Li, W., Huang, M., Feng, M. J., & Liu, X. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.11.047 · Cited by 47
The fracture mechanics of biological and bioinspired materials
Pro, J. W., & Barthelat, F. (2019) · MRS Bulletin · doi:10.1557/mrs.2018.324 · Cited by 49
The Stomatopod Telson: Convergent Evolution in the Development of a Biological Shield
Yaraghi, N. A., Trikanad, A. A., Restrepo, D., Huang, W. D., Rivera, J., Herrera, S. A., Zhernenkov, M., Parkinson, D. Y., Caldwell, R. L., Zavattieri, P. D., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201902238 · Cited by 49
Yu, H., Zhu, Y., Xiong, Z., & Lu, B. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125666 · Cited by 49
Shen, J., Hu, L., Zhang, L., Liu, W., Fang, A., & Sun, Y. (2020) · Materials Science and Engineering A · doi:10.1016/j.msea.2020.139997 · Cited by 47
Wang, X., Sánchez-Mata, O., Atabay, S. E., Muñiz-Lerma, J. A., Shandiz, M. A., & Brochu, M. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.102104 · Cited by 47
Strong and highly flexible slivers prepared from natural bamboo culm using NaOH pretreatment
Chen, H., Wu, J., Shi, J., Zhang, W., & Wang, G. (2021) · Industrial Crops and Products · doi:10.1016/j.indcrop.2021.113773 · Cited by 48
Guo, Y. Z., Nakajima, T., Mredha, M. T. I., Guo, H. L., Cui, K., Zheng, Y. P., Cui, W. L., Kurokawa, T., & Gong, J. P. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.132040 · Cited by 47
Bai, H., Zhong, L., Shang, Z., Xu, Y., Wu, H. P., Bai, J., & Ding, Y. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.08.316 · Cited by 46
Twist and lock: nutshell structures for high strength and energy absorption
Xiao, N., Felhofer, M., Antreich, S. J., Huss, J. C., Mayer, K., Singh, A. P., Bock, P., & Gierlinger, N. (2021) · Royal Society Open Science · doi:10.1098/rsos.210399 · Cited by 48
“To combine strength and toughness is a big challenge in material science and engineering [30].”
BackgroundYang, L., Liang, D., Cheng, Z., Duan, R., Zhong, C., Luan, J., Jiao, Z., & Ren, F. (2022) · Fundamental Research · doi:10.1016/j.fmre.2022.05.024 · Cited by 48
Bamboo-inspired strong, tough and stable composites derived from renewable bamboo
Han, S., Chen, F., Yu, Y., Chen, L., & Wang, G. (2023) · Industrial Crops and Products · doi:10.1016/j.indcrop.2023.116292 · Cited by 49
Advanced manufacturing methods for ceramic and bioinspired ceramic composites: A review
Nazari, K. A., Tran, P., Tan, P., Ghazlan, A., Ngo, T., & Xie, Y. M. (2023) · Open Ceramics · doi:10.1016/j.oceram.2023.100399 · Cited by 45
Yue, H., Yao, Y., Li, Y., Ding, L., Guo, J., Tang, X., Li, F., Sun, Y., Huang, J., Zhong, H., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202308039 · Cited by 49
Li, T., & Li, Y. (2024) · Advanced Materials · doi:10.1002/adma.202309604 · Cited by 46
Biobased fibers from natural to synthetic: Processing, manufacturing, and application
Liu, F., Pan, L., Liu, Y., Zhai, G., Zhou, S., Zhang, X., Zhang, Z., Liu, Q., Yu, S., Zhu, L., et al. (2024) · Matter · doi:10.1016/j.matt.2024.04.006 · Cited by 50
Jing, J., Yao, B., Sun, W. C., Chen, J., Xu, J., & Fu, J. (2024) · Angewandte Chemie · doi:10.1002/ange.202410693 · Cited by 54
The Latest Advances in Mechanically Robust Self‐Healing Polyurea Based on Dynamic Chemistry
Hao, Y., & Zhu, G. (2025) · Advanced Science · doi:10.1002/advs.202414788 · Cited by 50
Enhanced fatigue endurance of metallic glasses through a staircase-like fracture mechanism
Gludovatz, B., Demetriou, M. D., Floyd, M., Hohenwarter, A., Johnson, W. L., & Ritchie, R. O. (2013) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1317715110 · Cited by 46
“The development of the often mutually exclusive properties of strength and toughness is in itself a significant challenge (47); further combining this with excellent fatigue resistance in many respects represents an ideal suite of properties for a structural material.”
BackgroundSelf-citationOliver-Ortega, H., Granda, L. A., Espinach, F. X., Delgado‐Aguilar, M., Duran, J., & Mutjé, P. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.09.062 · Cited by 47
Bobzin, K., Brögelmann, T., Kruppe, N. C., Arghavani, M., Mayer, J., & Weirich, T. E. (2017) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2017.06.092 · Cited by 46
Estimation of the effective properties of two-dimensional cellular materials: a review
Ongaro, F. (2018) · Theoretical and Applied Mechanics Letters · doi:10.1016/j.taml.2018.04.010 · Cited by 49
Liang, S. M., Ji, H., & Li, X. (2021) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2021.01.082 · Cited by 47
Molecular mechanism of abnormally large nonsoftening deformation in a tough hydrogel
Ye, Y. N., Cui, K., Hong, W., Li, X., Yu, C., Hourdet, D., Nakajima, T., Kurokawa, T., & Gong, J. P. (2021) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2014694118 · Cited by 46
“The latter behavior is sometimes called yielding (3, 9) or yielding-like phenomenon (10, 11).”
Background
Metadata
- Authors
- Ritchie, R. O.
- Affiliations
- Lawrence Berkeley National Laboratory (US)
- Corresponding author
- Ritchie, Robert O.
- ORCID
- Ritchie, Robert O.
- Venue
- Nature Materials
- Published
- 2011-10-24
- Volume
- 10
- Issue
- 11
- Pages
- 817-822
- ISSN
- 1476-1122 (ISSN-L)
- 1476-4660
- OpenAlex
- W1971974144
- Cited by
- 3,989
- References
- 27
- Citations by year
- 2026: 458 · 2025: 556 · 2024: 474 · 2023: 385 · 2022: 398 · 2021: 332 · 2020: 280 · 2019: 259 · 2018: 242 · 2017: 172 · 2016: 140 · 2015: 120 · 2014: 81 · 2013: 62 · 2012: 30
- FWCI
- 27.12
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- www.springer.com/tdm (vor)
- Locations
- Nature Materials (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Metals and Alloys › Microstructure and mechanical properties
- Physical Sciences › Materials Science › Biomaterials › Calcium Carbonate Crystallization and Inhibition
- Physical Sciences › Materials Science › Metals and Alloys › Metallic Glasses and Amorphous Alloys
- Keywords
- strength-toughness trade-off, damage tolerance, fracture resistance, amorphous alloys, biological materials, advanced ceramics, ductility
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.