The conflicts between strength and toughness
The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Abstract
The attainment of both strength and toughness is a vital requirement for most structural materials; unfortunately these properties are generally mutually exclusive. Although the quest continues for stronger and harder materials, these have little to no use as bulk structural materials without appropriate fracture resistance. It is the lower-strength, and hence higher-toughness, materials that find use for most safety-critical applications where premature or, worse still, catastrophic fracture is unacceptable. For these reasons, the development of strong and tough (damage-tolerant) materials has traditionally been an exercise in compromise between hardness versus ductility. Drawing examples from metallic glasses, natural and biological materials, and structural and biomimetic ceramics, we examine some of the newer strategies in dealing with this conflict. Specifically, we focus on the interplay between the mechanisms that individually contribute to strength and toughness, noting that these phenomena can originate from very different lengthscales in a material's structural architecture. We show how these new and natural materials can defeat the conflict of strength versus toughness and achieve unprecedented levels of damage tolerance within their respective material classes.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Cavitation that frequently observed during stretching was also suppressed due to side constraints according to Ref [27].”
From Simultaneously Toughening and Strengthening of PLA-b-PCL Copolymer via Pressure-induced-flow Processing at Room Temperature (2018) · cites this paper as [27]
In the citing paper
“Polyesterbased TPEs are attractive because of their degradability and synthetic versatility, 5-10 yet they suffer from a fundamental trade-off: enhancing tensile strength often reduces elasticity, while improving stretchability typically compromises strength.11,12”
From Metal-Free Synthesis of Tough PLLA- b -PCVL- b -PLLA Triblock Polyester Thermoplastic Elastomers from Mixed Monomers (2026) · cites this paper as [11]
Citations
Cites
THE MATERIAL BONE: Structure-Mechanical Function Relations
Weiner, S., & Wagner, H. D. (1998) · Annual Review of Materials Science · doi:10.1146/annurev.matsci.28.1.271 · Cited by 2,724
Nabarro, F. R. N., Duesbery, M. S., Hirth, J. P., & Kubin, L. P. (1979) · Cited by 2,675
Freezing as a Path to Build Complex Composites
Deville, S., Saiz, E., Nalla, R. K., & Tomsia, A. P. (2006) · Science · doi:10.1126/science.1120937 · Cited by 1,900
Tough, Bio-Inspired Hybrid Materials
Munch, E., Launey, M. E., Alsem, D. H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2008) · Science · doi:10.1126/science.1164865 · Cited by 1,822 · cited 1×
“Recently, synthetic, yet bioinspired, bulk ceramic materials have been made in the image of the nacre structur”
BackgroundSelf-citationPerspective on the Development of High‐Toughness Ceramics
Evans, A. G. (1990) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1990.tb06493.x · Cited by 1,625 · cited 1×
“A prime example of this is in brittle materials such as ceramics, which invariably cannot be toughened by promoting plasticit”
BackgroundDesigning metallic glass matrix composites with high toughness and tensile ductility
Hofmann, D. C., Suh, J.-Y., Wiest, A., Duan, G., Lind, M.-L., Demetriou, M. D., & Johnson, W. L. (2008) · Nature · doi:10.1038/nature06598 · Cited by 1,501
On the Fracture Toughness of Advanced Materials
Launey, M. E., & Ritchie, R. O. (2009) · Advanced Materials · doi:10.1002/adma.200803322 · Cited by 967
Self-citationRitchie, R. O. (1988) · Materials Science and Engineering: A · doi:10.1016/0025-5416(88)90547-2 · Cited by 874
Self-citationDeformation mechanisms in nacre
Wang, R. Z., Suo, Z., Evans, A. G., Yao, N., & Aksay, I. A. (2001) · Journal of Materials Research · doi:10.1557/jmr.2001.0340 · Cited by 835 · cited 1×
“, the frictional motion between mineral platelets in seashell”
BackgroundOn the Mechanistic Origins of Toughness in Bone
Launey, M. E., Buehler, M. J., & Ritchie, R. O. (2010) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070909-104427 · Cited by 741 · cited 1×
“The origin of the intrinsic (plastic deformation) mechanisms tends to be on the smaller, submicrometre lengthscales, akin to the nanometre scale of dislocation Burgers' vectors in metals, whereas the processes of extrinsic toughening and fracture occur on much coarser lengthscales typically well into the micrometre ra…”
BackgroundSelf-citation
Research works printed but not linked: 1
- Sarikaya, M. & Aksay, I. A. in Results and Problems in Cell Differentiation Vol. 19 (ed. Case, S.) Ch. 1 (Springer, 1992).
Cited by
Items 701–800 of 1,006
Polymeric materials reinforced by noncovalent aggregates of polymer chains
Liu, X., & Sun, J. (2021) · Aggregate · doi:10.1002/agt2.109 · Cited by 60
Biomimetic fracture model of lizard tail autotomy
Baban, N. S., Orozaliev, A., Kirchhof, S., Stubbs, C. J., & Song, Y. (2022) · Science · doi:10.1126/science.abh1614 · Cited by 58
Guo, Y., Su, H., Yang, P., Shen, Z., Zhao, D., Zhao, Y., Liu, Y., & Zhou, H. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.103257 · Cited by 58
Wang, X., Chen, X., Huang, B. B., Chen, L., Fang, C., Ma, X., & Fei, B. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.132328 · Cited by 58
Zhang, X., Wang, L., Zhang, K., Zhou, K., Hou, K., Zhao, Z., Li, G., Yao, Q., Nan, S., & Wang, X. (2025) · Advanced Materials · doi:10.1002/adma.202414720 · Cited by 60
Fracture behaviors of ceramic tissue scaffolds for load bearing applications
Entezari, A., Roohani‐Esfahani, S., Zhang, Z., Zreiqat, H., Dunstan, C. R., & Li, Q. (2016) · Scientific Reports · doi:10.1038/srep28816 · Cited by 58
“Onset of damage takes place when the stress ratio equals one (f = 1) as indicated in equation (4).”
BackgroundGu, G. X., Wettermark, S. D., & Buehler, M. J. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.07.002 · Cited by 59
Li, S., Wang, Y., Xu, W., & Shi, B. Q. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b07078 · Cited by 59
Power‐law hereditariness of hierarchical fractal bones
Deseri, L., Paola, M. D., Zingales, M., & Pollaci, P. (2013) · International Journal for Numerical Methods in Biomedical Engineering · doi:10.1002/cnm.2572 · Cited by 61
Bioinspired Underwater Propulsors
Buren, T. W. V., Floryan, D., & Smits, A. J. (2020) · Cambridge University Press eBooks · doi:10.1017/9781139058995.006 · Cited by 62
Deformation and Cracking Mechanism in CrN/TiN Multilayer Coatings
Azizpour, A., Hahn, R., Klimashin, F. F., Wójcik, T., Poursaeidi, E., & Mayrhofer, P. H. (2019) · Coatings · doi:10.3390/coatings9060363 · Cited by 57
Fracture properties of thin film TiN at elevated temperatures
Buchinger, J., Löfler, L., Ast, J., Wagner, A., Chen, Z., Michler, J., Zhang, Z., Mayrhofer, P. H., Holec, D., & Bartosik, M. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.108885 · Cited by 57
Qiu, C., Su, Y., Yang, J., Wang, X., Chen, B., Ouyang, Q., & Zhang, D. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.108996 · Cited by 57
A lightweight refractory complex concentrated alloy with high strength and uniform ductility
Jia, Y., Wang, G., Wu, S., Mu, Y., Yi, Y. Z., Jia, Y., Liaw, P. K., Zhang, T., & Liu, C. T. (2022) · Applied Materials Today · doi:10.1016/j.apmt.2022.101429 · Cited by 57
Novel forming process for aluminum alloy thin shells at ultra-low temperature gradient
Fan, X., Chen, X., & Yuan, S. (2022) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2022.103992 · Cited by 57
Sadeghi, B., & Cavaliere, P. D. (2023) · Materials · doi:10.3390/ma16175745 · Cited by 63
Achieving strength-ductility synergy in zirconium via ultra-dense twin-twin networks
Lin, X.-H., & Han, W. (2024) · Acta Materialia · doi:10.1016/j.actamat.2024.119825 · Cited by 57
Khan, I., Barsoum, I., Abas, M., Rashid, A. A., Koç, M., & Tariq, M. (2024) · Composite Structures · doi:10.1016/j.compstruct.2024.118490 · Cited by 59
Zhang, Y., Cui, X., Chen, L., Gao, N., Zhang, X., Wang, Z., Cong, G., Zhai, X., Luo, J., Zhang, Y., et al. (2025) · International Journal of Plasticity · doi:10.1016/j.ijplas.2025.104283 · Cited by 57
Meng, L., Wang, X., Hu, X., Shi, H., & Wu, K. (2018) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2018.10.021 · Cited by 57
Wang, L., Fu, C., Wu, Y., Li, R., Wang, Y., & Hui, X. (2019) · Materials Science and Engineering A · doi:10.1016/j.msea.2019.138147 · Cited by 57
He, Z., Zhu, Y., Xia, J., & Wu, H. (2019) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2019.103706 · Cited by 57
The relationship between fracture toughness and tensile property in high-strength steels
Li, H. F., Wei, J. L., Yang, S., & Liu, Y. (2021) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2021.105854 · Cited by 56
Novel processing strategy and challenges on whisker-reinforced ceramic matrix composites
Lv, X., Ye, F., Cheng, L., & Zhang, L. (2022) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2022.106974 · Cited by 56
Song, Z., He, Q. Z., Ma, E., & Xu, J. Z. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.07.071 · Cited by 56
Cohesive-length scales for damage and toughening mechanisms
Sills, R. B., & Thouless, M. D. (2014) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2014.06.010 · Cited by 56
“(December 7, 2013) (Revised: May 27, 2014)”
Damage-tolerant Zr–Cu–Al-based bulk metallic glasses with record-breaking fracture toughness
Xu, J. Z., & Ma, E. (2014) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2014.160 · Cited by 56
Dislocation Strengthening without Ductility Trade-off in Metastable Austenitic Steels
Liu, J., Jin, Y., Fang, X., Chen, C., Feng, Q., Liu, X., Chen, Y. Z., Suo, T., Zhao, F., Huang, T., et al. (2016) · Scientific Reports · doi:10.1038/srep35345 · Cited by 57
Wang, Y., Shen, P., Guo, R., Hu, Z., & Jiang, Q. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.12.038 · Cited by 59
Super-elasticity and deformation mechanism of three-dimensional pillared graphene network structures
Wang, Y., Zhu, Y., Wang, F., Liu, X., & Wu, H. (2017) · Carbon · doi:10.1016/j.carbon.2017.03.092 · Cited by 56
Di, X., Tong, M., Li, C., Zhao, C., & Wang, D. (2018) · Materials Science and Engineering A · doi:10.1016/j.msea.2018.11.070 · Cited by 56
Interfacial toughening effect of suture structures
Liu, Z., Zhang, Z., & Ritchie, R. O. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.11.034 · Cited by 58
Self-citationMechanical properties of FeMnCoCr high entropy alloy alloyed with C/Si at low temperatures
Yang, F., Dong, L., Cai, L., Hu, X., & Fang, F. (2020) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2020.157876 · Cited by 56
Lu, E., Zhao, J., Makkonen, I., Mizohata, K., Li, Z., Hua, M., Djurabekova, F., & Tuomisto, F. (2021) · Acta Materialia · doi:10.1016/j.actamat.2021.117093 · Cited by 57
Shi, X., Zhang, J., Corrigan, N. A., & Boyer, C. A. (2021) · Polymer Chemistry · doi:10.1039/d1py01283e · Cited by 62
Sowan, N., Cox, L. M., Shah, P. K., Song, H. B., Stansbury, J. W., & Bowman, C. N. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201800511 · Cited by 59
Nutor, R. K., Cao, Q., Wang, X., Ding, S. Q., Zhang, D., & Jiang, J. Z. (2022) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2022.101032 · Cited by 56
Role of topology in dictating the fracture toughness of mechanical metamaterials
Choukir, S., & Singh, C. V. (2022) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2022.107945 · Cited by 55
Theory of transformation-mediated twinning
Lu, S., Sun, X., Tian, Y., An, X., Li, W., Chen, Y., Zhang, H., & Vitos, L. (2022) · PNAS Nexus · doi:10.1093/pnasnexus/pgac282 · Cited by 55
“When plastic deformation is solely accommodated by dislocation slips, the strengthductility dilemma is generally inevitable since the conventional metallurgical strengthening methods via generating internal barriers for dislocation motion cause a sacrifice in ductility (1, 2).”
BackgroundMao, Y., Chen, H., & Xiong, J. (2024) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2024.03.099 · Cited by 55
Lu, S., Wang, Q., Yao, T., Feng, H., Gao, M. Z., Xi, T., Li, H., Tan, L., & Yang, K. (2024) · International Journal of Plasticity · doi:10.1016/j.ijplas.2024.104144 · Cited by 55
Liu, C., Zhang, L., Wang, K., & Wang, L. (2024) · Acta Materialia · doi:10.1016/j.actamat.2024.120526 · Cited by 57
Veprek, S., & Heijman, M. G. J. (2012) · Thin Solid Films · doi:10.1016/j.tsf.2012.08.048 · Cited by 55
Belde, M. M., Springer, H., Inden, G., & Raabe, D. (2015) · Acta Materialia · doi:10.1016/j.actamat.2014.11.025 · Cited by 55
Xia, W., Song, J., Meng, Z., Shao, C., & Keten, S. (2016) · Molecular Systems Design & Engineering · doi:10.1039/c6me00022c · Cited by 56
Toughening of thin ceramic plates using bioinspired surface patterns
Malik, I. A., & Barthelat, F. (2016) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2016.07.010 · Cited by 55
Xie, Z., Sebald, G., & Guyomar, D. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.09.164 · Cited by 57
Lin, C., Han, Y., Guo, C., Chang, Y., Han, X., Lin, L., & Jiang, F. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.06.057 · Cited by 55
Crack deflection occurs by constrained microcracking in nacre
Song, J., Fan, C., Ma, H., Liang, L., & Wei, Y. (2017) · Acta Mechanica Sinica · doi:10.1007/s10409-017-0724-1 · Cited by 56
“Almost all engineering structural materials are required to be both strong and tough (damage-tolerant), but these two mechanical properties are mutually exclusive [1].”
BackgroundStructural Compromise between High Hardness and Crack Resistance in Aluminoborate Glasses
Frederiksen, K. F., Januchta, K., Mascaraque, N., Youngman, R. E., Bauchy, M., Rzoska, S. J., Boćkowski, M., & Smedskjær, M. M. (2018) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.8b02905 · Cited by 55
Effect of Nitrogen Doping and Temperature on Mechanical Durability of Silicon Carbide Thin Films
Tomáštík, J., Čtvrtlík, R., Ingr, T., Maňák, J., & Opletalová, A. (2018) · Scientific Reports · doi:10.1038/s41598-018-28704-3 · Cited by 55
Zhang, S., Feng, X., Zhu, S., Huan, Q., Han, K., Ma, Y., & Yu, M. (2013) · Materials Letters · doi:10.1016/j.matlet.2012.12.019 · Cited by 54
Designing ductile, tough, nacre-inspired concrete member in metric scale
Ye, J., Yu, K., Yu, J., Zhang, Q., & Li, L. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.103987 · Cited by 56
Zhang, M., Yu, Q., Liu, Z., Zhang, J., Jiao, D., Li, S., Peng, H. F., Wang, Q., Zhang, Z., & Ritchie, R. O. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.108783 · Cited by 54
Self-citationZhao, S., Zhang, Y., Yang, J., & Kitipornchai, S. (2022) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2021.12.042 · Cited by 54
Huang, C., Hu, C., Liu, Y., Liang, Z., & Huang, M. (2022) · Materials Futures · doi:10.1088/2752-5724/ac7fae · Cited by 54
“The strengthening of steels is generally achieved by blocking or inhibiting dislocation movement with defects at different length scales [62, 82], which inevitably causes strain concentration and thus microcrack formation once dislocations are entangled.”
BackgroundHua, A., Su, Y., Cai, Y., Wang, X., Liu, K., Cao, H., Zhang, D., & Ouyang, Q. (2022) · Materials Characterization · doi:10.1016/j.matchar.2022.112243 · Cited by 54
Structural design and mechanical performance of composite vascular grafts
Zia, A. W., Liu, R., & Wu, X. (2022) · Bio-Design and Manufacturing · doi:10.1007/s42242-022-00201-7 · Cited by 60
Zhou, Y., Liu, C., Luo, Q., & Li, Q. (2022) · Materials Characterization · doi:10.1016/j.matchar.2022.112288 · Cited by 54
Trifunctional Laves precipitates enabling dual-hierarchical FeCrAl alloys ultra-strong and ductile
Liu, S. Y., Wang, H., Zhang, J., Zhang, H., Xue, H., Liu, G., & Sun, J. (2022) · International Journal of Plasticity · doi:10.1016/j.ijplas.2022.103438 · Cited by 54
Deep Learning Accelerated Design of Mechanically Efficient Architected Materials
Lee, S., Zhang, Z., & Gu, G. X. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c02746 · Cited by 56
Toughening oxide glasses through paracrystallization
Tang, H., Cheng, Y., Yuan, X., Zhang, K., Kurnosov, A., Chen, Z., Xiao, W., Jeppesen, H. S., Etter, M., Liang, T., et al. (2023) · Nature Materials · doi:10.1038/s41563-023-01625-x · Cited by 54
Heterostructured metal matrix composites for structural applications: a review
Zhao, L., Zheng, W., Hu, Y., Guo, Q., & Zhang, D. (2024) · Journal of Materials Science · doi:10.1007/s10853-023-09300-x · Cited by 56
“1c) [2].”
Stress fluctuation, crack renucleation and toughening in layered materials
Hsueh, C.-J., Avellar, L., Bourdin, B., Ravichandran, G., & Bhattacharya, K. (2018) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2018.04.011 · Cited by 54
“Consequently, both intrinsic and extrinsic toughening mechanisms have been identified and studied; still relatively little is known regarding the mechanistic contributions to overall toughening of heterogeneous materials [9, 18].”
BackgroundStructure design, fabrication, properties of laminated ceramics: A review
Cheng, L., Sun, M., Ye, F., Bai, Y., Li, M., Fan, S., & Zhang, L. (2018) · International Journal of Lightweight Materials and Manufacture · doi:10.1016/j.ijlmm.2018.08.002 · Cited by 56
New Advances in Vehicular Technology and Automotive Engineering
Carmo, J. P., & Ribeiro, J. (2012) · InTech eBooks · doi:10.5772/2617 · Cited by 58
Growing a synthetic mollusk shell
Barthelat, F. (2016) · Science · doi:10.1126/science.aah6507 · Cited by 54
Lightweight, ultra-tough, 3D-architected hybrid carbon microlattices
Surjadi, J. U., Zhou, Y., Huang, S., Wang, L., Li, M., Fan, S., Li, X., Zhou, J., Lam, R. H. W., Wang, Z., et al. (2022) · Matter · doi:10.1016/j.matt.2022.08.010 · Cited by 55
Configuration effect and mechanical behavior of particle reinforced aluminum matrix composites
Lin, Z., Su, Y., Qiu, C., Yang, J., Chai, X., Liu, X., Ouyang, Q., & Zhang, D. (2022) · Scripta Materialia · doi:10.1016/j.scriptamat.2022.115135 · Cited by 53
Liu, Y., Xie, X., Liu, Z., Yu, Q., Jia, Q., Wang, S., Zhang, Z., Yang, R., & Ritchie, R. O. (2022) · Materials Today · doi:10.1016/j.mattod.2022.12.002 · Cited by 53
Self-citationTransparent Self-Cleaning Coatings: A Review
Wu, P., Xue, Z., Yu, T., & Penkov, O. V. (2023) · Coatings · doi:10.3390/coatings13071270 · Cited by 53
Strengthening and toughening metallic glasses: The elastic perspectives and opportunities
Liu, Z., & Zhong-hou, Z. (2014) · Journal of Applied Physics · doi:10.1063/1.4872249 · Cited by 53
del Rosario, Z., Rupp, M., Kim, Y., Antono, E., & Ling, J. (2020) · The Journal of Chemical Physics · doi:10.1063/5.0006124 · Cited by 53
“24 In lieu of more preference information, one must navigate the resulting multi-objective trade-off space.”
BackgroundCrovace, A. M., Lacitignola, L., Monopoli, D., Staffieri, F., Francioso, E. G., Meo, A. D., Becerra, J., Crovace, A., & Santos‐Ruiz, L. (2020) · Animals · doi:10.3390/ani10081389 · Cited by 62
Fatigue Improvement of AlSi10Mg Fabricated by Laser-Based Powder Bed Fusion through Heat Treatment
Sajadi, F., Tiemann, J.-M., Bandari, N., Darabi, A. C., Mola, J., & Schmauder, S. (2021) · Metals · doi:10.3390/met11050683 · Cited by 52
Xiong, L., Li, H.-T., Nie, M.-X., Fu, S., Li, Y., Zhang, Q., Chen, F., Han, D., & Fu, Q. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c13256 · Cited by 55
Cai, P., Ding, Y., Wang, C., Wu, J., Hart, M. L., Rolauffs, B., Mo, X., & Sun, B. (2025) · Biomedical Technology · doi:10.1016/j.bmt.2025.100099 · Cited by 60
Song, B., Guo, N., Xin, R., Pan, H., & Guo, C. (2015) · Materials Science and Engineering A · doi:10.1016/j.msea.2015.10.069 · Cited by 52
Zhang, N., & Shahsavari, R. (2016) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2016.07.021 · Cited by 52
Chen, K., Zhang, S., Li, A., Tang, X., Li, L., & Guo, L. (2018) · ACS Nano · doi:10.1021/acsnano.7b08671 · Cited by 52
Discrete‐Continuum Duality of Architected Materials: Failure, Flaws, and Fracture
Mateos, A. J., Huang, W. D., Zhang, Y., & Greer, J. R. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201806772 · Cited by 53
Kourkoumelis, N., Zhang, X., Lin, Z., & Wang, J. (2019) · Clinical Reviews in Bone and Mineral Metabolism · doi:10.1007/s12018-018-9255-y · Cited by 62
Liu, X., Li, J., Liu, E., He, C., Shi, C., & Zhao, N. (2019) · Materials Science and Engineering A · doi:10.1016/j.msea.2019.01.046 · Cited by 52
Katnam, K. B., Dalfi, H. K., & Potluri, P. (2019) · Composite Structures · doi:10.1016/j.compstruct.2019.111083 · Cited by 52
“In this regard, achieving a balance between in-plane mechanical properties and impact damage tolerance, which are in general mutually exclusive properties [3, 4], has been a key challenge to ensure post-impact structural integrity [2, 5].”
BackgroundBreaking the Limit of Micro‐Ductility in Oxide Glasses
Januchta, K., Stępniewska, M., Jensen, L. R., Zhang, Y., Somers, M. A. J., Bauchy, M., Yue, Y., & Smedskjær, M. M. (2019) · Advanced Science · doi:10.1002/advs.201901281 · Cited by 52
Designing solid solution hardening to retain uniform ductility while quadrupling yield strength
Yang, P.-J., Li, J., Han, W., Li, J., & Ma, E. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.08.024 · Cited by 52
“This well-known strength-ductility trade-off [1,2] has been the subject of extensive research in recent years.”
BackgroundAchieving high strength and ductility in copper matrix composites with graphene network
Shi, L., Liu, M., Yang, Y., Liu, R., Zhang, W., Zheng, Q., & Ren, Z. (2021) · Materials Science and Engineering A · doi:10.1016/j.msea.2021.142107 · Cited by 52
Micro fracture investigations of white etching layers
Saxena, A. K., Kumar, A., Herbig, M., Brinckmann, S., Dehm, G., & Kirchlechner, C. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107892 · Cited by 51
“A common feature of structural materials is the inverse dependence of toughness and strength [46].”
BackgroundYuan, Z., Han, Y., Zang, S.-L., Chen, J., He, G., Chai, Y., Yang, Z., & Fu, Q. (2020) · Ceramics International · doi:10.1016/j.ceramint.2020.12.196 · Cited by 51
Bio-inspired composite laminate design with improved out-of-plane strength and ductility
Melaibari, A. A., Wagih, A., Basha, M., Kabeel, A. M., Gilles Lubineau, A., & Eltaher, M. A. (2021) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2021.106362 · Cited by 51
High strength aluminum alloys design via explainable artificial intelligence
Park, S., Kayani, S. H., Euh, K., Seo, E., Kim, H., Park, S., Yadav, B. N., Park, S. J., Sung, H., & Jung, I. D. (2022) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2022.163828 · Cited by 55
Fracture properties of high-entropy alloys
Gludovatz, B., & Ritchie, R. O. (2022) · MRS Bulletin · doi:10.1557/s43577-022-00267-9 · Cited by 53
Self-citationOu, Y., Fu, A., Wu, L., Yi, X., & Mao, D. (2023) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2023.107872 · Cited by 51
Sadeghi, B., Cavaliere, P. D., & Shabani, A. M. H. (2023) · Materials Today Communications · doi:10.1016/j.mtcomm.2023.107535 · Cited by 66
Uncovering the Intrinsic High Fracture Toughness of Titanium via Lowered Oxygen Impurity Content
Zou, X., Han, W., & Ma, E. (2024) · Advanced Materials · doi:10.1002/adma.202408286 · Cited by 51
Cartilage-bioinspired tenacious concrete-like hydrogel verified via in-situ testing
Liu, J., Zhao, W., Ma, Z., Zhao, H., & Ren, L. (2025) · Nature Communications · doi:10.1038/s41467-025-57653-5 · Cited by 51
Zhao, C., Dong, W., Mahlia, T. M. I., Shi, L. X., Wang, K., Shah, S. P., & Li, W. (2025) · Energy and Buildings · doi:10.1016/j.enbuild.2025.115732 · Cited by 56
Influence of second phases on fatigue crack growth behavior of nickel aluminum bronze
Xu, X., Lv, Y., Meng, H., Xiong, D., Zhang, L., Wang, L., & Lü, W. (2015) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2015.09.014 · Cited by 51
Wang, C., Shi, K., Gross, C. T., Pureza, J. M., Lacerda, M. D. M., & Chung, Y.-W. (2014) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2014.08.018 · Cited by 55
Inzana, J. A., Maher, J. R., Takahata, M., Schwarz, E. M., Berger, A. J., & Awad, H. A. (2012) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2012.11.039 · Cited by 52
“Fracture toughness is generally independent of strength and refers to bone’s ability to resist fracture by dissipating high local stresses associated with crack initiation and propagation (Ritchie, 2011).”
Background
Metadata
- Authors
- Ritchie, R. O.
- Affiliations
- Lawrence Berkeley National Laboratory (US)
- Corresponding author
- Ritchie, Robert O.
- ORCID
- Ritchie, Robert O.
- Venue
- Nature Materials
- Published
- 2011-10-24
- Volume
- 10
- Issue
- 11
- Pages
- 817-822
- ISSN
- 1476-1122 (ISSN-L)
- 1476-4660
- OpenAlex
- W1971974144
- Cited by
- 3,989
- References
- 27
- Citations by year
- 2026: 458 · 2025: 556 · 2024: 474 · 2023: 385 · 2022: 398 · 2021: 332 · 2020: 280 · 2019: 259 · 2018: 242 · 2017: 172 · 2016: 140 · 2015: 120 · 2014: 81 · 2013: 62 · 2012: 30
- FWCI
- 27.12
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- www.springer.com/tdm (vor)
- Locations
- Nature Materials (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Metals and Alloys › Microstructure and mechanical properties
- Physical Sciences › Materials Science › Biomaterials › Calcium Carbonate Crystallization and Inhibition
- Physical Sciences › Materials Science › Metals and Alloys › Metallic Glasses and Amorphous Alloys
- Keywords
- strength-toughness trade-off, damage tolerance, fracture resistance, amorphous alloys, biological materials, advanced ceramics, ductility
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.