The conflicts between strength and toughness
The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Abstract
The attainment of both strength and toughness is a vital requirement for most structural materials; unfortunately these properties are generally mutually exclusive. Although the quest continues for stronger and harder materials, these have little to no use as bulk structural materials without appropriate fracture resistance. It is the lower-strength, and hence higher-toughness, materials that find use for most safety-critical applications where premature or, worse still, catastrophic fracture is unacceptable. For these reasons, the development of strong and tough (damage-tolerant) materials has traditionally been an exercise in compromise between hardness versus ductility. Drawing examples from metallic glasses, natural and biological materials, and structural and biomimetic ceramics, we examine some of the newer strategies in dealing with this conflict. Specifically, we focus on the interplay between the mechanisms that individually contribute to strength and toughness, noting that these phenomena can originate from very different lengthscales in a material's structural architecture. We show how these new and natural materials can defeat the conflict of strength versus toughness and achieve unprecedented levels of damage tolerance within their respective material classes.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Cavitation that frequently observed during stretching was also suppressed due to side constraints according to Ref [27].”
From Simultaneously Toughening and Strengthening of PLA-b-PCL Copolymer via Pressure-induced-flow Processing at Room Temperature (2018) · cites this paper as [27]
In the citing paper
“Polyesterbased TPEs are attractive because of their degradability and synthetic versatility, 5-10 yet they suffer from a fundamental trade-off: enhancing tensile strength often reduces elasticity, while improving stretchability typically compromises strength.11,12”
From Metal-Free Synthesis of Tough PLLA- b -PCVL- b -PLLA Triblock Polyester Thermoplastic Elastomers from Mixed Monomers (2026) · cites this paper as [11]
Citations
Cites
THE MATERIAL BONE: Structure-Mechanical Function Relations
Weiner, S., & Wagner, H. D. (1998) · Annual Review of Materials Science · doi:10.1146/annurev.matsci.28.1.271 · Cited by 2,724
Nabarro, F. R. N., Duesbery, M. S., Hirth, J. P., & Kubin, L. P. (1979) · Cited by 2,675
Freezing as a Path to Build Complex Composites
Deville, S., Saiz, E., Nalla, R. K., & Tomsia, A. P. (2006) · Science · doi:10.1126/science.1120937 · Cited by 1,900
Tough, Bio-Inspired Hybrid Materials
Munch, E., Launey, M. E., Alsem, D. H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2008) · Science · doi:10.1126/science.1164865 · Cited by 1,822 · cited 1×
“Recently, synthetic, yet bioinspired, bulk ceramic materials have been made in the image of the nacre structur”
BackgroundSelf-citationPerspective on the Development of High‐Toughness Ceramics
Evans, A. G. (1990) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1990.tb06493.x · Cited by 1,625 · cited 1×
“A prime example of this is in brittle materials such as ceramics, which invariably cannot be toughened by promoting plasticit”
BackgroundDesigning metallic glass matrix composites with high toughness and tensile ductility
Hofmann, D. C., Suh, J.-Y., Wiest, A., Duan, G., Lind, M.-L., Demetriou, M. D., & Johnson, W. L. (2008) · Nature · doi:10.1038/nature06598 · Cited by 1,501
On the Fracture Toughness of Advanced Materials
Launey, M. E., & Ritchie, R. O. (2009) · Advanced Materials · doi:10.1002/adma.200803322 · Cited by 967
Self-citationRitchie, R. O. (1988) · Materials Science and Engineering: A · doi:10.1016/0025-5416(88)90547-2 · Cited by 874
Self-citationDeformation mechanisms in nacre
Wang, R. Z., Suo, Z., Evans, A. G., Yao, N., & Aksay, I. A. (2001) · Journal of Materials Research · doi:10.1557/jmr.2001.0340 · Cited by 835 · cited 1×
“, the frictional motion between mineral platelets in seashell”
BackgroundOn the Mechanistic Origins of Toughness in Bone
Launey, M. E., Buehler, M. J., & Ritchie, R. O. (2010) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070909-104427 · Cited by 741 · cited 1×
“The origin of the intrinsic (plastic deformation) mechanisms tends to be on the smaller, submicrometre lengthscales, akin to the nanometre scale of dislocation Burgers' vectors in metals, whereas the processes of extrinsic toughening and fracture occur on much coarser lengthscales typically well into the micrometre ra…”
BackgroundSelf-citation
Research works printed but not linked: 1
- Sarikaya, M. & Aksay, I. A. in Results and Problems in Cell Differentiation Vol. 19 (ed. Case, S.) Ch. 1 (Springer, 1992).
Cited by
Items 201–300 of 1,006
Zhang, X., Shi, C., Liu, E., He, F., Ma, L., Li, Q., Li, J., Bacsa, W., Zhao, N., & He, C. (2017) · Nanoscale · doi:10.1039/c6nr07335b · Cited by 174
Polymer Adhesion: Seeking New Solutions for an Old Problem
Raos, G., & Zappone, B. (2021) · Macromolecules · doi:10.1021/acs.macromol.1c01182 · Cited by 171
Zadpoor, A. (2017) · International Journal of Molecular Sciences · doi:10.3390/ijms18081607 · Cited by 172
“show either high strength values or high toughness values [105].”
BackgroundHu, J., Du, L.-X., Xu, W., Zhai, J.-H., Dong, Y., Liu, Y.-J., & Misra, R. D. K. (2018) · Materials Characterization · doi:10.1016/j.matchar.2017.11.058 · Cited by 172
Dislocation-toughened ceramics
Porz, L., Klomp, A. J., Fang, X., Li, N., Yildirim, C., Detlefs, C., Bruder, E., Höfling, M., Rheinheimer, W., Patterson, E. A., et al. (2021) · Materials Horizons · doi:10.1039/d0mh02033h · Cited by 175
Advancing the Mechanical Performance of Glasses: Perspectives and Challenges
Wondraczek, L., Bouchbinder, E., Ehrlicher, A., Mauro, J. C., Sajzew, R., & Smedskjaer, M. M. (2022) · Advanced Materials · doi:10.1002/adma.202109029 · Cited by 168
Isolation of Aramid Nanofibers for High Strength and Toughness Polymer Nanocomposites
Lin, J., Bang, S. H., Malakooti, M. H., & Sodano, H. A. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b01488 · Cited by 167
Strengthening and Toughening Hierarchical Nanocellulose via Humidity-Mediated Interface
Hou, Y., Guan, Q.-F., Xia, J., Ling, Z.-C., He, Z., Han, Z.-M., Yang, H.-B., Gu, P., Zhu, Y., Yu, S.-H., et al. (2021) · ACS Nano · doi:10.1021/acsnano.0c08574 · Cited by 170
The synthesis and application of crystalline–amorphous hybrid materials
Lan, H., Wang, J., Cheng, L., Yu, D., Wang, H., & Guo, L. (2024) · Chemical Society Reviews · doi:10.1039/d3cs00860f · Cited by 163
Lin, E., Li, Y., Ortiz, C., & Boyce, M. C. (2014) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2014.08.011 · Cited by 171
“However, because an anti-trapezoidal geometry is inherently interlocking, if the tip angle is large enough, the post-failure process is more graceful, resulting in higher toughness, analogous to the increased toughness due to interlocking platelets shown in nacre (Katti et al., 2005; Ritchie, 2011).”
Preparation and anisotropic properties of textured structural ceramics: A review
Zhang, Z., Duan, X., Qiu, B., Yang, Z., Cai, D., He, P., Jia, D., & Zhou, Y. (2019) · Journal of Advanced Ceramics · doi:10.1007/s40145-019-0325-5 · Cited by 168
“There are usually conflicts between toughness and strength, because strength is the ability resisting non-recoverable (for example, plastic) deformation, while high toughness is usually related to good plasticity [55,200].”
BackgroundEngineering lattice metamaterials for extreme property, programmability, and multifunctionality
Jia, Z., Liu, F., Jiang, X., & Wang, L. (2020) · Journal of Applied Physics · doi:10.1063/5.0004724 · Cited by 170
Mechanical design of the highly porous cuttlebone: A bioceramic hard buoyancy tank for cuttlefish
Yang, T., Jia, Z., Chen, H., Deng, Z., Liu, W., Chen, L., & Li, L. (2020) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2009531117 · Cited by 161
“Moreover, the richer organic contents in the septa (8) may also improve the damage resistance (52).”
BackgroundNiu, W., Zhu, Y., Wang, R., Lu, Z., Liu, X., & Sun, J. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c06995 · Cited by 169
Toughening mechanisms in bioinspired multilayered materials
Askarinejad, S., & Rahbar, N. (2015) · Journal of The Royal Society Interface · doi:10.1098/rsif.2014.0855 · Cited by 168
“Inspired by this structure, there have been significant efforts in the past decades to synthesize new materials with mechanical performance comparable to nacre in the past decades [4–15].”
The optimum grain size for strength-ductility combination in metals
Wang, Y., Huang, C., Ma, X., Zhao, J., Guo, F., Fang, X., Zhu, Y., & Wei, Y. (2023) · International Journal of Plasticity · doi:10.1016/j.ijplas.2023.103574 · Cited by 167
“Good ductility originates from high work hardening capability, which helps to resist strain localization and consequently prevent catastrophic failure (Ritchie, 2011; Zhu and Wu, 2018).”
Elastic films of single-crystal two-dimensional covalent organic frameworks
Yang, Y., Liang, B., Kreie, J., Hambsch, M., Liang, Z., Wang, C., Huang, S., Dong, X., Gong, L., Liang, C., et al. (2024) · Nature · doi:10.1038/s41586-024-07505-x · Cited by 166
Structural Orientation and Anisotropy in Biological Materials: Functional Designs and Mechanics
Liu, Z., Zhang, Z., & Ritchie, R. O. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201908121 · Cited by 164
Self-citationThe fracture mechanics of human bone: influence of disease and treatment
Zimmermann, E. A., Busse, B., & Ritchie, R. O. (2015) · BoneKEy Reports · doi:10.1038/bonekey.2015.112 · Cited by 164
“A prime benefit to the hierarchical arrangement is that strength (that is, the resistance to inelastic deformation) and toughness (that is, the resistance to crack growth or fracture) can be generated independently.(11) Indeed, strength originates from intrinsic mechanisms at small length-scales that promote plasticit…”
BackgroundSelf-citationBioinspired, Graphene/Al2O3 Doubly Reinforced Aluminum Composites with High Strength and Toughness
Zhang, Y., & Li, X. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b03308 · Cited by 164
Gu, H., Zhang, H., Ma, C., Xu, X., Wang, Y., Wang, Z., Wei, R., Liu, H., Liu, C., Shao, Q., et al. (2019) · Carbon · doi:10.1016/j.carbon.2018.10.029 · Cited by 163
Synthetic and Bone tissue engineering graft substitutes: What is the future?
Valtanen, R. S., Yang, Y. P., Gurtner, G. C., Maloney, W. J., & Lowenberg, D. W. (2021) · Injury · doi:10.1016/j.injury.2020.07.040 · Cited by 158
Fiber‐Reinforced Viscoelastomers Show Extraordinary Crack Resistance That Exceeds Metals
Cui, W., King, D. R., Huang, Y., Chen, L., Sun, T. L., Guo, Y., Saruwatari, Y., Hui, C., Kurokawa, T., & Gong, J. P. (2020) · Advanced Materials · doi:10.1002/adma.201907180 · Cited by 162
Advanced Structural Materials by Bioinspiration
Libonati, F., & Buehler, M. J. (2017) · Advanced Engineering Materials · doi:10.1002/adem.201600787 · Cited by 163
Li, Y., Lu, Y., Li, W., Khedr, M., Liu, H., & Jin, X. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.06.019 · Cited by 164
Thin lamellar films with enhanced mechanical properties for durable radiative cooling
Xiong, L., Wei, Y., Chen, C., Chen, X., Fu, Q., & Deng, H. (2023) · Nature Communications · doi:10.1038/s41467-023-41797-3 · Cited by 162
Jiang, L., Fu, H., Zhang, Z., Zhang, H., Zhang, X., Feng, X., Xu, X., Mao, M., & Xie, J. (2024) · Acta Materialia · doi:10.1016/j.actamat.2024.119873 · Cited by 172
Peng, S., Wang, Z., Li, J., Fang, Q., & Wei, Y. (2023) · International Journal of Plasticity · doi:10.1016/j.ijplas.2023.103710 · Cited by 166
Ming, P., Song, Z., Gong, S., Zhang, Y., Duan, J., Zhang, Q., Jiang, L., & Cheng, Q. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta05742f · Cited by 160
Trifunctional nanoprecipitates ductilize and toughen a strong laminated metastable titanium alloy
Zhang, C., Liu, S., Zhang, J., Zhang, D., Kuang, J., Bao, X., Liu, G., & Sun, J. F. (2023) · Nature Communications · doi:10.1038/s41467-023-37155-y · Cited by 159
L12-strengthened high-entropy alloys for advanced structural applications
Yang, T., Zhao, Y., Liu, W., Kai, J., & Liu, C. (2018) · Journal of Materials Research · doi:10.1557/jmr.2018.186 · Cited by 160
“However, most conventional alloys designed based on one single-principle element gradually show a serious embrittlement effect with increasing strength, following the long-standing dilemma of strength-ductility trade-off.(1,2) Multicomponent highentropy alloys (HEAs), emerging as a new class of metallic materials, hav…”
BackgroundWater: How Does It Influence the CaCO3 Formation?
Du, H., & Amstad, E. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201903662 · Cited by 159
Transparent Omniphobic Coating with Glass‐Like Wear Resistance and Polymer‐Like Bendability
Zhang, K., Huang, S., Wang, J., & Liu, G. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201904210 · Cited by 158
Ultra-Strong, Ultra-Tough, Transparent, and Sustainable Nanocomposite Films for Plastic Substitute
Guan, Q., Ling, Z., Han, Z., Yang, H., & Yu, S. (2020) · Matter · doi:10.1016/j.matt.2020.07.014 · Cited by 157
Impact‐Resistant Hydrogels by Harnessing 2D Hierarchical Structures
Liang, X., Chen, G., Lei, I. M., Zhang, P., Wang, Z., Chen, X., Lu, M., Zhang, J., Wang, Z., Sun, T., et al. (2022) · Advanced Materials · doi:10.1002/adma.202207587 · Cited by 172
Zhao, H., Yue, Y., Guo, L., Wu, J., Zhang, Y., Li, X., Mao, S., & Han, X. (2016) · Advanced Materials · doi:10.1002/adma.201600839 · Cited by 155
Mahdi, E. M., & Tan, J. (2015) · Journal of Membrane Science · doi:10.1016/j.memsci.2015.09.066 · Cited by 166
“Our findings demonstrate that additional emphasis must be given to the characterisation of material toughness [77], especially from the viewpoint of ductility and fracture energy.”
BackgroundFracture toughness and structural evolution in the TiAlN system upon annealing
Bartosik, M., Rumeau, C., Hahn, R., Zhang, Z. L., & Mayrhofer, P. H. (2017) · Scientific Reports · doi:10.1038/s41598-017-16751-1 · Cited by 158
Zhang, X., Shi, C., Liu, E., Zhao, N., & He, C. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b09799 · Cited by 154
Bioactive Calcium Phosphate-Based Composites for Bone Regeneration
Tavoni, M., Dapporto, M., Tampieri, A., & Sprio, S. (2021) · Journal of Composites Science · doi:10.3390/jcs5090227 · Cited by 167
Harnessing instability for work hardening in multi-principal element alloys
Xu, B., Duan, H., Chen, X., Wang, J., Ma, Y., Jiang, P., Yuan, F., Wang, Y., Ren, Y., Du, K., et al. (2024) · Nature Materials · doi:10.1038/s41563-024-01871-7 · Cited by 160
“2a1,2).”
BackgroundHierarchical Toughening of Nacre‐Like Composites
Grossman, M., Pivovarov, D., Bouville, F., Dransfeld, C. A., Masania, K., & Studart, A. R. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201806800 · Cited by 162
Rawat, P., Zhu, D., Rahman, M. Z., & Barthelat, F. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.12.003 · Cited by 165
Yuan, T., Cui, X., Liu, X., Qu, X., & Sun, J. (2019) · Macromolecules · doi:10.1021/acs.macromol.9b00053 · Cited by 155
High impact toughness of CrCoNi medium-entropy alloy at liquid-helium temperature
Yang, M., Zhou, L., Wang, C., Jiang, P., Yuan, F., Ma, E., & Wu, X. (2019) · Scripta Materialia · doi:10.1016/j.scriptamat.2019.07.010 · Cited by 152
Chen, J., An, Q., Ming, W., & Chen, M. (2021) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2021.04.061 · Cited by 152
The dual role of TRIP effect on ductility and toughness of a medium Mn steel
Hu, C., Huang, C., Liu, Y., Perlade, A., Zhu, K., & Huang, M. (2022) · Acta Materialia · doi:10.1016/j.actamat.2022.118629 · Cited by 152
Enhanced strength in pure Ti via design of alternating coarse- and fine-grain layers
Li, D., Fan, G., Huang, X., Jensen, D. J., Miao, K., Xu, C., Geng, L., Zhang, Y., & Yu, T. (2021) · Acta Materialia · doi:10.1016/j.actamat.2021.116627 · Cited by 151
Toughening materials: enhancing resistance to fracture
Ritchie, R. O. (2021) · Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rsta.2020.0437 · Cited by 198
“Extrinsic toughening acts to lower the local stress and strain fields at the crack tip; as it depends on the presence of a crack, it affects only the crack-growth toughness, specifically through the generation of a rising R-curve [5].”
BackgroundInfluentialSelf-citationWang, D., Wang, Z., Li, K., Ma, J., Liu, W., & Shen, Z. J. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.12.010 · Cited by 150
Yen, C.-C., Lu, H.-N., Tsai, M., Wu, B.-W., Lo, Y., Wang, C., Chang, S.-Y., & Yen, S. (2019) · Corrosion Science · doi:10.1016/j.corsci.2019.06.024 · Cited by 150
Wang, Y., Jiao, A., Qiu, C., Liu, Q., Yang, Y., Bian, S., Zeng, F., & Jin, Z. (2022) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2022.107737 · Cited by 154
Malopheyev, S., Vysotskiy, I., Kulitskiy, V., Mironov, S. Y., & Kaibyshev, R. O. (2016) · Materials Science and Engineering A · doi:10.1016/j.msea.2016.03.063 · Cited by 149
Moravčík, I., Čížek, J., Zapletal, J., Kováčová, Z., Veselý, J., Minárik, P., Kitzmantel, M., Neubauer, E., & Dlouhý, I. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.01.036 · Cited by 149
Mesocrystalline calcium silicate hydrate: A bioinspired route toward elastic concrete materials
Picker, A., Nicoleau, L., Burghard, Ž., Bill, J., Zlotnikov, I., Labbez, C., Nonat, A., & Cölfen, H. (2017) · Science Advances · doi:10.1126/sciadv.1701216 · Cited by 155
“However, in all approaches, the C-S-H nanoplatelets are still randomly aggregated, and thus, the potential mechanical performance remains limited (10).”
BackgroundTunable Chemical Disorder in Concentrated Alloys: Defect Physics and Radiation Performance
Zhang, Y., Osetsky, Y. N., & Weber, W. J. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00387 · Cited by 158
Graphene-copper composite with micro-layered grains and ultrahigh strength
Wang, L., Yang, Z., Cui, Y., Wei, B., Xu, S., Sheng, J., Wang, M., Zhu, Y., & Fei, W. (2017) · Scientific Reports · doi:10.1038/srep41896 · Cited by 148
Printing nature: Unraveling the role of nacre's mineral bridges
Gu, G. X., Libonati, F., Wettermark, S. D., & Buehler, M. J. (2017) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2017.05.007 · Cited by 151
“As most engineering materials sacrifice strength for toughness, and vice versa, researchers strive to overcome these limitations by exploring hybrid materials (Gu et al., 2016a; Kickelbick, 2007; Pedro and Sanchez, 2006; Ritchie, 2011).”
BackgroundHan, X., Ye, Y., Lam, F., Pu, J., & Jiang, F. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta11118b · Cited by 153
High temperature deformability of ductile flash-sintered ceramics via in-situ compression
Cho, J., Li, Q., Wang, H., Fan, Z., Li, J., Xue, S., Vikrant, K. S. N., Wang, H., Holland, T. B., Mukherjee, A. K., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-04333-2 · Cited by 146
Bioinspired sensor system for health care and human‐machine interaction
Xue, J., Zou, Y., Deng, Y., & Li, Z. (2022) · EcoMat · doi:10.1002/eom2.12209 · Cited by 155
On deformation behavior of Fe-Mn based structural alloys
Chowdhury, P. B., Canadinç, D., & Huseyin Sehitoglu, B. (2017) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2017.09.002 · Cited by 145
Wei, D., Wang, L., Zhang, Y., Gong, W., Tsuru, T., Lobzenko, I. P., Jiang, J., Harjo, S., Kawasaki, T., Bae, J. W., et al. (2021) · Acta Materialia · doi:10.1016/j.actamat.2021.117571 · Cited by 145
Designing superhard, self-toughening CrAlN coatings through grain boundary engineering
Zhao, L., Munroe, P. R., Jiang, Z., Zhao, X., Xu, J., Zhou, Z., Jiang, J., Fang, F., & Xie, Z. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.06.049 · Cited by 142
Recent search for new superhard materials: Go nano!
Veprek, S. (2013) · Journal of Vacuum Science & Technology A Vacuum Surfaces and Films · doi:10.1116/1.4818590 · Cited by 142
Three-Dimensional-Printing of Bio-Inspired Composites
Gu, G. X., Su, I., Sharma, S., Voros, J. L., Qin, Z., & Buehler, M. J. (2016) · Journal of Biomechanical Engineering · doi:10.1115/1.4032423 · Cited by 157
“Large number of interfaces that exists on the fibrous lamellar structure of bone result in toughening mechanisms such as crack-bridging, microcrack formation, and crack deflection [25], as shown in Fig.”
3D Printing metamaterials towards tissue engineering
Dogan, E., Bhusal, A., Çeçen, B., & Miri, A. K. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2020.100752 · Cited by 161
Tang, N., Jiang, Y., Wei, K., Zheng, Z., Zhang, H., & Hu, J. (2023) · Advanced Materials · doi:10.1002/adma.202309576 · Cited by 156
High-Performance Bamboo Steel Derived from Natural Bamboo
Wang, Y.-Y., Wang, X., Li, Y., Huang, P., Yang, B., Hu, N., & Fu, S. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c18239 · Cited by 148
Bio-inspired “jigsaw”-like interlocking sutures: Modeling, optimization, 3D printing and testing
Malik, I. A., Mirkhalaf, M., & Barthelat, F. (2017) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2017.03.003 · Cited by 143
“…( Bajaj et al., 2010 ), sea shells ( Barthelat et al., 2007 ), or turtle carapace ( Chen et al., 2015 ) display unique and attractive combinations of strength, toughness, deformability and puncture resistance, properties that are difficult to combine in engineering materials ( Ritchie, 2011 ).”
BackgroundDevelopment of high entropy alloys: A review
Sharma, P., Dwivedi, V. K., & Dwivedi, S. P. (2021) · Materials Today Proceedings · doi:10.1016/j.matpr.2020.12.023 · Cited by 159
Labonte, D., Lenz, A.-K., & Oyen, M. L. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.05.034 · Cited by 144
Zheng, W., Huang, J., Zang, X., Xu, X., Cai, W., Lin, Z., & Lai, Y. (2022) · Advanced Materials · doi:10.1002/adma.202204581 · Cited by 138
Yue, X. Y., Yang, H., Han, Z., Lu, Y., Yin, C., Zhao, X., Liu, Z., Guan, Q., & Yu, S. (2023) · Advanced Materials · doi:10.1002/adma.202306451 · Cited by 144
Multiscale Geometric Design Principles Applied to 3D Printed Schwarzites
Sajadi, S. M., Owuor, P. S., Schara, S., Woellner, C. F., Rodrigues, V., Vajtai, R., Lou, J., Galvao, D. S., Tiwary, C. S., & Ajayan, P. M. (2017) · Advanced Materials · doi:10.1002/adma.201704820 · Cited by 144
Jiang, S., Peng, R. L., Hegedűs, Z., Gnaupel-Herold, T. H., Moverare, J. J., Lienert, U., Fang, F., Zhao, X. M., Zuo, L., & Jia, N. (2020) · Acta Materialia · doi:10.1016/j.actamat.2020.116546 · Cited by 135
Kuang, J., Dai, Z., Liu, L., Yang, Z., Jin, M., & Zhang, Z. (2015) · Nanoscale · doi:10.1039/c5nr00841g · Cited by 141
A review on improving mechanical properties of high entropy alloy: interstitial atom doping
Zhu, C., Xu, L., Liu, M., Guo, M., & Wei, S. (2023) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2023.05.002 · Cited by 140
Biomimetic twisted plywood structural materials
Chen, S.-M., Gao, H., Zhu, Y., Yao, H., Mao, L., Song, Q.-Y., Xia, J., Pan, Z., He, Z., Wu, H., et al. (2018) · National Science Review · doi:10.1093/nsr/nwy080 · Cited by 135
Chen, J., Xing, L., Fang, G., Lei, L., & Liu, W. (2021) · Acta Materialia · doi:10.1016/j.actamat.2021.116741 · Cited by 137
Zhu, J. G., Zhang, H., & Kotov, N. A. (2013) · ACS Nano · doi:10.1021/nn400972t · Cited by 138
“In general, strength and toughness are two mutually exclusive properties, which usually require a reduction of one to improve the other.(41,42)”
Naglieri, V., Gludovatz, B., Tomsia, A. P., & Ritchie, R. O. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.07.022 · Cited by 135
Self-citationDesign and Fabrication of Bioinspired Hierarchical Dissipative Elastic Metamaterials
Miniaci, M., Krushynska, A. O., Gliozzi, A. S., Kherraz, N., Bosia, F., & Pugno, N. M. (2018) · Physical Review Applied · doi:10.1103/physrevapplied.10.024012 · Cited by 131
“providing many energy dissipation and crack deflection mechanisms over various size scales to contribute to high toughness [5].”
BackgroundUltratough graphene–black phosphorus films
Zhou, T., Ni, H. W., Wang, Y., Wu, C., Zhang, H., Zhang, J., Tomsia, A. P., Jiang, L., & Cheng, Q. (2020) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1916610117 · Cited by 131
Recent progress in the design and fabrication of multifunctional structures based on metamaterials
Yuan, X., Chen, M., Yao, Y., Guo, X., Huang, Y., Peng, Z., Xu, B., Lv, B., Tao, R., Duan, S., et al. (2020) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2020.100883 · Cited by 141
Chen, J., Liu, B., Xing, L., Liu, W., Lei, L., & Fang, G. (2021) · Acta Materialia · doi:10.1016/j.actamat.2021.117609 · Cited by 131
Gong, S., Cui, W. L., Zhang, Q., Cao, A., Jiang, L., & Cheng, Q. (2015) · ACS Nano · doi:10.1021/acsnano.5b05252 · Cited by 130
“However, the conflicts between strength and toughness have commonly existed in binary nanocomposites.(12) Prasad et al.”
BackgroundExploiting π–π Stacking for Stretchable Semiconducting Polymers
Son, S. Y., Kim, J.-H., Song, E., Choi, K., Lee, J., Cho, K., Kim, T., & Park, T. (2018) · Macromolecules · doi:10.1021/acs.macromol.8b00093 · Cited by 131
Liu, K., Su, Y., Wang, X., Cai, Y., Cao, H., Ouyang, Q., & Zhang, D. (2022) · Composites Part B Engineering · doi:10.1016/j.compositesb.2022.110350 · Cited by 133
Reducing deformation anisotropy to achieve ultrahigh strength and ductility in Mg at the nanoscale
Yu, Q., Qi, L., Mishra, R. K., Li, J., & Minor, A. M. (2013) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1306371110 · Cited by 130
“Proc Natl Acad Sci USA 100(10):5597–5600.”
BackgroundHunt, H. B., Torres, A. M., Palomino, P. M., Marty, E., Saiyed, R., Cohn, M. R., Jo, J., Warner, S. J., Sroga, G. E., King, K. B., et al. (2019) · Journal of Bone and Mineral Research · doi:10.1002/jbmr.3711 · Cited by 137
“Although we did not detect a group‐wise difference in postyield strain or postyield toughness, the tradeoff between strength and toughness is well‐documented.((59,77)) It is possible that the large effect of BV/TV overshadowed any smaller effects of T2DM on postyield properties and inhibited our ability to detect such…”
BackgroundFabricating strong and tough aramid fibers by small addition of carbon nanotubes
Luo, J., Wen, Y., Jia, X., Lei, X., Gao, Z., Jian, M., Xiao, Z., Li, L., Zhang, J., Li, T., et al. (2023) · Nature Communications · doi:10.1038/s41467-023-38701-4 · Cited by 129
Carbon nanotubes: Their potential and pitfalls for bone tissue regeneration and engineering
Newman, P. L. H., Minett, A. I., Ellis-Behnke, R. G., & Zreiqat, H. (2013) · Nanomedicine Nanotechnology Biology and Medicine · doi:10.1016/j.nano.2013.06.001 · Cited by 152
Global Analysis of the Mechanical Properties of Organic Crystals
Karothu, D. P., Halabi, J. M., Ahmed, E., Ferreira, R., Spackman, P. R., Spackman, M. A., & Naumov, P. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202113988 · Cited by 131
Yang, G., & Kim, J. (2022) · Acta Materialia · doi:10.1016/j.actamat.2022.117974 · Cited by 128
Tough and Conductive Nacre‐inspired MXene/Epoxy Layered Bulk Nanocomposites
Wang, H., Lu, R., Yan, J., Peng, J., Tomsia, A. P., Liang, R., Sun, G., Liu, M., Jiang, L., & Cheng, Q. (2022) · Angewandte Chemie International Edition · doi:10.1002/anie.202216874 · Cited by 154
Bio-inspired functional wood-based materials – hybrids and replicates
Burgert, I., Cabane, É., Zollfrank, C., & Berglund, L. A. (2015) · International Materials Reviews · doi:10.1179/1743280415y.0000000009 · Cited by 135
High performance dental resin composites with hydrolytically stable monomers
Wang, X., Huyang, G., Palagummi, S., Liu, X., Škrtić, D., Beauchamp, C., Bowen, R., & Sun, J. (2017) · Dental Materials · doi:10.1016/j.dental.2017.10.007 · Cited by 127
“, as hardness increases, toughness decreases [54,55].”
Sha, C., Zhou, Z., Xie, Z., & Munroe, P. R. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2019.145101 · Cited by 130
Interstitial doping enhances the strength-ductility synergy in a CoCrNi medium entropy alloy
Moravčík, I., Horník, V., Minárik, P., Li, L., Dlouhý, I., Janovská, M., Raabe, D., & Li, Z. (2020) · Materials Science and Engineering A · doi:10.1016/j.msea.2020.139242 · Cited by 126
Metadata
- Authors
- Ritchie, R. O.
- Affiliations
- Lawrence Berkeley National Laboratory (US)
- Corresponding author
- Ritchie, Robert O.
- ORCID
- Ritchie, Robert O.
- Venue
- Nature Materials
- Published
- 2011-10-24
- Volume
- 10
- Issue
- 11
- Pages
- 817-822
- ISSN
- 1476-1122 (ISSN-L)
- 1476-4660
- OpenAlex
- W1971974144
- Cited by
- 3,989
- References
- 27
- Citations by year
- 2026: 458 · 2025: 556 · 2024: 474 · 2023: 385 · 2022: 398 · 2021: 332 · 2020: 280 · 2019: 259 · 2018: 242 · 2017: 172 · 2016: 140 · 2015: 120 · 2014: 81 · 2013: 62 · 2012: 30
- FWCI
- 27.12
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- www.springer.com/tdm (vor)
- Locations
- Nature Materials (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Metals and Alloys › Microstructure and mechanical properties
- Physical Sciences › Materials Science › Biomaterials › Calcium Carbonate Crystallization and Inhibition
- Physical Sciences › Materials Science › Metals and Alloys › Metallic Glasses and Amorphous Alloys
- Keywords
- strength-toughness trade-off, damage tolerance, fracture resistance, amorphous alloys, biological materials, advanced ceramics, ductility
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.