The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
The conflicts between strength and toughness
Abstract
The attainment of both strength and toughness is a vital requirement for most structural materials; unfortunately these properties are generally mutually exclusive. Although the quest continues for stronger and harder materials, these have little to no use as bulk structural materials without appropriate fracture resistance. It is the lower-strength, and hence higher-toughness, materials that find use for most safety-critical applications where premature or, worse still, catastrophic fracture is unacceptable. For these reasons, the development of strong and tough (damage-tolerant) materials has traditionally been an exercise in compromise between hardness versus ductility. Drawing examples from metallic glasses, natural and biological materials, and structural and biomimetic ceramics, we examine some of the newer strategies in dealing with this conflict. Specifically, we focus on the interplay between the mechanisms that individually contribute to strength and toughness, noting that these phenomena can originate from very different lengthscales in a material's structural architecture. We show how these new and natural materials can defeat the conflict of strength versus toughness and achieve unprecedented levels of damage tolerance within their respective material classes.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Cavitation that frequently observed during stretching was also suppressed due to side constraints according to Ref [27].”
From Simultaneously Toughening and Strengthening of PLA-b-PCL Copolymer via Pressure-induced-flow Processing at Room Temperature (2018) · cites this paper as [27]
In the citing paper
“Polyesterbased TPEs are attractive because of their degradability and synthetic versatility, 5-10 yet they suffer from a fundamental trade-off: enhancing tensile strength often reduces elasticity, while improving stretchability typically compromises strength.11,12”
From Metal-Free Synthesis of Tough PLLA- b -PCVL- b -PLLA Triblock Polyester Thermoplastic Elastomers from Mixed Monomers (2026) · cites this paper as [11]
Citations
Cites
THE MATERIAL BONE: Structure-Mechanical Function Relations
Weiner, S., & Wagner, H. D. (1998) · Annual Review of Materials Science · doi:10.1146/annurev.matsci.28.1.271 · Cited by 2,724
Nabarro, F. R. N., Duesbery, M. S., Hirth, J. P., & Kubin, L. P. (1979) · Cited by 2,675
Freezing as a Path to Build Complex Composites
Deville, S., Saiz, E., Nalla, R. K., & Tomsia, A. P. (2006) · Science · doi:10.1126/science.1120937 · Cited by 1,900
Tough, Bio-Inspired Hybrid Materials
Munch, E., Launey, M. E., Alsem, D. H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2008) · Science · doi:10.1126/science.1164865 · Cited by 1,822 · cited 1×
“Recently, synthetic, yet bioinspired, bulk ceramic materials have been made in the image of the nacre structur”
BackgroundSelf-citationPerspective on the Development of High‐Toughness Ceramics
Evans, A. G. (1990) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1990.tb06493.x · Cited by 1,625
Designing metallic glass matrix composites with high toughness and tensile ductility
Hofmann, D. C., Suh, J.-Y., Wiest, A., Duan, G., Lind, M.-L., Demetriou, M. D., & Johnson, W. L. (2008) · Nature · doi:10.1038/nature06598 · Cited by 1,501
On the Fracture Toughness of Advanced Materials
Launey, M. E., & Ritchie, R. O. (2009) · Advanced Materials · doi:10.1002/adma.200803322 · Cited by 967
Self-citationRitchie, R. O. (1988) · Materials Science and Engineering: A · doi:10.1016/0025-5416(88)90547-2 · Cited by 874
Self-citationDeformation mechanisms in nacre
Wang, R. Z., Suo, Z., Evans, A. G., Yao, N., & Aksay, I. A. (2001) · Journal of Materials Research · doi:10.1557/jmr.2001.0340 · Cited by 835
On the Mechanistic Origins of Toughness in Bone
Launey, M. E., Buehler, M. J., & Ritchie, R. O. (2010) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070909-104427 · Cited by 741
Self-citation
Research works printed but not linked: 1
- Sarikaya, M. & Aksay, I. A. in Results and Problems in Cell Differentiation Vol. 19 (ed. Case, S.) Ch. 1 (Springer, 1992).
Cited by
A fracture-resistant high-entropy alloy for cryogenic applications
Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E. H., George, E. P., & Ritchie, R. O. (2014) · Science · doi:10.1126/science.1254581 · Cited by 5,714
Self-citationBioinspired structural materials
Wegst, U. G. K., Bai, H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2015) · Nature Materials · doi:10.1038/nmat4089 · Cited by 4,721
Self-citationMetastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
Li, Z., Pradeep, K. G., Deng, Y., Raabe, D., & Tasan, C. C. (2016) · Nature · doi:10.1038/nature17981 · Cited by 4,071
Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures
Gludovatz, B., Hohenwarter, A., Thurston, K. V. S., Bei, H., Wu, Z., George, E. P., & Ritchie, R. O. (2016) · Nature Communications · doi:10.1038/ncomms10602 · Cited by 1,930
Self-citationEnhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes
Lei, Z., Liu, X., Wu, Y., Wang, H., Jiang, S., Wang, S., Hui, X., Wu, Y., Gault, B., Kontis, P., et al. (2018) · Nature · doi:10.1038/s41586-018-0685-y · Cited by 1,764
Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys
Yang, T., Zhao, Y. L., Tong, Y., Jiao, Z. B., Wei, J., Cai, J. X., Han, X. D., Chen, D., Hu, A., Kai, J. J., et al. (2018) · Science · doi:10.1126/science.aas8815 · Cited by 1,684
Processing bulk natural wood into a high-performance structural material
Song, J., Chen, C., Zhu, S., Zhu, M., Dai, J., Ray, U., Li, Y., Kuang, Y., Li, Y., Quispe, N., et al. (2018) · Nature · doi:10.1038/nature25476 · Cited by 1,632
A radiative cooling structural material
Li, T., Zhai, Y., He, S., Gan, W., Wei, Z., Heidarinejad, M., Dalgo, D., Mi, R., Zhao, X., Song, J., et al. (2019) · Science · doi:10.1126/science.aau9101 · Cited by 1,614
Zhu, Y., & Wu, X. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101019 · Cited by 1,537
Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation
Jiang, S., Wang, H., Wu, Y., Liu, X., Chen, H., Yao, M., Gault, B., Ponge, D., Raabe, D., Hirata, A., et al. (2017) · Nature · doi:10.1038/nature22032 · Cited by 1,441
Extraordinary strain hardening by gradient structure
Wu, X., Jiang, P., Chen, L., Yuan, F., & Zhu, Y. T. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1324069111 · Cited by 1,315
Mechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys
Li, Z., Zhao, S., Ritchie, R. O., & Meyers, M. A. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.12.003 · Cited by 1,171
Self-citationTowards strength–ductility synergy through the design of heterogeneous nanostructures in metals
Ma, E., & Zhu, T. (2017) · Materials Today · doi:10.1016/j.mattod.2017.02.003 · Cited by 1,132
Evading the strength–ductility trade-off dilemma in steel through gradient hierarchical nanotwins
Wei, Y., Li, Y., Zhu, L., Liu, Y., Lei, X., Wang, G., Wu, Y., Mi, Z., Liu, J., Wang, H., et al. (2014) · Nature Communications · doi:10.1038/ncomms4580 · Cited by 1,109
Synthetic nacre by predesigned matrix-directed mineralization
Mao, L.-B., Gao, H.-L., Yao, H.-B., Liu, L., Cölfen, H., Liu, G., Chen, S.-M., Li, S.-K., Yan, Y.-X., Liu, Y.-Y., et al. (2016) · Science · doi:10.1126/science.aaf8991 · Cited by 983
Strong, tough and stiff bioinspired ceramics from brittle constituents
Bouville, F., Maire, E., Meille, S., Van de Moortèle, B., Stevenson, A. J., & Deville, S. (2014) · Nature Materials · doi:10.1038/nmat3915 · Cited by 959
Liu, Z., Meyers, M. A., Zhang, Z., & Ritchie, R. O. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.04.013 · Cited by 895
Self-citationMultiscale metallic metamaterials
Zheng, X., Smith, W., Jackson, J., Moran, B., Cui, H., Chen, D., Ye, J., Fang, N., Rodriguez, N., Weisgraber, T., et al. (2016) · Nature Materials · doi:10.1038/nmat4694 · Cited by 870
Nanoscale origins of the damage tolerance of the high-entropy alloy CrMnFeCoNi
Zhang, Z., Mao, M. M., Wang, J., Gludovatz, B., Zhang, Z., Mao, S. X., George, E. P., Yu, Q., & Ritchie, R. O. (2015) · Nature Communications · doi:10.1038/ncomms10143 · Cited by 845
Self-citationZhao, Q., Sun, Q., Xin, S., Chen, Y., Wu, C., Wang, H., Xu, J., Wan, M., Zeng, W., & Zhao, Y. (2022) · Materials Science and Engineering: A · doi:10.1016/j.msea.2022.143260 · Cited by 785
Advances in ultra-high temperature ceramics, composites, and coatings
Ni, D., Cheng, Y., Zhang, J., Liu, J.-X., Zou, J., Chen, B., Wu, H., Li, H., Dong, S., Han, J., et al. (2022) · Journal of Advanced Ceramics · doi:10.1007/s40145-021-0550-6 · Cited by 789
High-entropy alloys with heterogeneous microstructure: Processing and mechanical properties
Sathiyamoorthi, P., & Kim, H. S. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100709 · Cited by 766
Structure and mechanics of interfaces in biological materials
Barthelat, F., Yin, Z., & Buehler, M. J. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.7 · Cited by 765
Structural Design Elements in Biological Materials: Application to Bioinspiration
Naleway, S. E., Porter, M. M., McKittrick, J., & Meyers, M. A. (2015) · Advanced Materials · doi:10.1002/adma.201502403 · Cited by 730
Additive manufacturing of structural materials
Liu, G., Zhang, X., Chen, X., He, Y., Cheng, L., Huo, M., Yin, J., Hao, F., Chen, S., Wang, P., et al. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100596 · Cited by 707
Phase‐Transformation Ductilization of Brittle High‐Entropy Alloys via Metastability Engineering
Huang, H., Wu, Y., He, J., Wang, H., Liu, X., An, K., Wu, W., & Lu, Z. (2017) · Advanced Materials · doi:10.1002/adma.201701678 · Cited by 705
Hierarchical crack buffering triples ductility in eutectic herringbone high-entropy alloys
Shi, P., Li, R., Li, Y., Wen, Y., Zhong, Y., Ren, W., Shen, Z., Zheng, T., Peng, J., Liang, X., et al. (2021) · Science · doi:10.1126/science.abf6986 · Cited by 678
Li, Z., Zhu, Y., Niu, W., Yang, X., Jiang, Z., Lu, Z., Liu, X., & Sun, J. (2021) · Advanced Materials · doi:10.1002/adma.202101498 · Cited by 668
Calcium phosphate cements for bone substitution: Chemistry, handling and mechanical properties
Zhang, J., Liu, W., Schnitzler, V., Tancret, F., & Bouler, J.-M. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.11.001 · Cited by 667
Advanced Materials through Assembly of Nanocelluloses
Kontturi, E., Laaksonen, P., Linder, M. B., Nonappa, Gröschel, A. H., Rojas, O. J., & Ikkala, O. (2018) · Advanced Materials · doi:10.1002/adma.201703779 · Cited by 664
Zhang, Z., Sheng, H., Wang, Z., Gludovatz, B., Zhang, Z., George, E. P., Yu, Q., Mao, S. X., & Ritchie, R. O. (2017) · Nature Communications · doi:10.1038/ncomms14390 · Cited by 664
Self-citationMultiscale Toughening Mechanisms in Biological Materials and Bioinspired Designs
Huang, W., Restrepo, D., Jung, J., Su, F. Y., Liu, Z., Ritchie, R. O., McKittrick, J., Zavattieri, P., & Kisailus, D. (2019) · Advanced Materials · doi:10.1002/adma.201901561 · Cited by 662
Self-citationWu, S. W., Wang, G., Wang, Q., Jia, Y. D., Yi, J., Zhai, Q. J., Liu, J. B., Sun, B. A., Chu, H. J., Shen, J., et al. (2019) · Acta Materialia · doi:10.1016/j.actamat.2018.12.012 · Cited by 640
Structural evolutions of metallic materials processed by severe plastic deformation
Cao, Y., Ni, S., Liao, X., Song, M., & Zhu, Y. (2018) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2018.06.001 · Cited by 633
Ultrastrong ductile and stable high-entropy alloys at small scales
Zou, Y., Ma, H., & Spolenak, R. (2015) · Nature Communications · doi:10.1038/ncomms8748 · Cited by 634
Tailoring heterogeneities in high-entropy alloys to promote strength–ductility synergy
Ma, E., & Wu, X. (2019) · Nature Communications · doi:10.1038/s41467-019-13311-1 · Cited by 621
Hierarchically structured bioinspired nanocomposites
Nepal, D., Kang, S., Adstedt, K. M., Kanhaiya, K., Bockstaller, M. R., Brinson, L. C., Buehler, M. J., Coveney, P. V., Dayal, K., El-Awady, J. A., et al. (2023) · Nature Materials · doi:10.1038/s41563-022-01384-1 · Cited by 594
High‐Performance Polymeric Materials through Hydrogen‐Bond Cross‐Linking
Song, P., & Wang, H. (2020) · Advanced Materials · doi:10.1002/adma.201901244 · Cited by 614
Self‐Healing Hydrogels: The Next Paradigm Shift in Tissue Engineering?
Talebian, S., Mehrali, M., Taebnia, N., Pennisi, C. P., Kadumudi, F. B., Foroughi, J., Hasany, M., Nikkhah, M., Akbari, M., Orive, G., et al. (2019) · Advanced Science · doi:10.1002/advs.201801664 · Cited by 602
Super-tough MXene-functionalized graphene sheets
Zhou, T., Wu, C., Wang, Y., Tomsia, A. P., Li, M., Saiz, E., Fang, S., Baughman, R. H., Jiang, L., & Cheng, Q. (2020) · Nature Communications · doi:10.1038/s41467-020-15991-6 · Cited by 578
Gu, G. X., Chen, C.-T., Richmond, D. J., & Buehler, M. J. (2018) · Materials Horizons · doi:10.1039/c8mh00653a · Cited by 556
Layered nanocomposites by shear-flow-induced alignment of nanosheets
Zhao, C., Zhang, P., Zhou, J., Qi, S., Yamauchi, Y., Shi, R., Fang, R., Ishida, Y., Wang, S., Tomsia, A. P., et al. (2020) · Nature · doi:10.1038/s41586-020-2161-8 · Cited by 548
Exceptional fracture toughness of CrCoNi-based medium- and high-entropy alloys at 20 kelvin
Liu, D., Yu, Q., Kabra, S., Jiang, M., Forna-Kreutzer, P., Zhang, R., Payne, M., Walsh, F., Gludovatz, B., Asta, M., et al. (2022) · Science · doi:10.1126/science.abp8070 · Cited by 543
Self-citationBioinspired wood nanotechnology for functional materials
Berglund, L. A., & Burgert, I. (2018) · Advanced Materials · doi:10.1002/adma.201704285 · Cited by 518
Molnár, G., & Gravouil, A. (2017) · Finite Elements in Analysis and Design · doi:10.1016/j.finel.2017.03.002 · Cited by 515
Defects and anomalies in powder bed fusion metal additive manufacturing
Mostafaei, A., Zhao, C., He, Y., Reza Ghiaasiaan, S., Shi, B., Shao, S., Shamsaei, N., Wu, Z., Kouraytem, N., Sun, T., et al. (2022) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2021.100974 · Cited by 491
Surface and Interface Engineering for Nanocellulosic Advanced Materials
Yang, X., Biswas, S. K., Han, J., Tanpichai, S., Li, M., Chen, C., Zhu, S., Das, A. K., & Yano, H. (2021) · Advanced Materials · doi:10.1002/adma.202002264 · Cited by 497
Zadpoor, A. A. (2016) · Materials Horizons · doi:10.1039/c6mh00065g · Cited by 492
Li, Z., Tasan, C. C., Springer, H., Gault, B., & Raabe, D. (2017) · Scientific Reports · doi:10.1038/srep40704 · Cited by 488
Making ultrastrong steel tough by grain-boundary delamination
Liu, L., Yu, Q., Wang, Z., Ell, J., Huang, M. X., & Ritchie, R. O. (2020) · Science · doi:10.1126/science.aba9413 · Cited by 482
Self-citationLi, Z., Guo, Q., Li, Z., Fan, G., Xiong, D.-B., Su, Y., Zhang, J., & Zhang, D. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b03492 · Cited by 482
A strong, tough, and scalable structural material from fast-growing bamboo
Li, Z., Chen, C., Mi, R., Gan, W., Dai, J., Jiao, M., Xie, H., Yao, Y., Xiao, S., & Hu, L. (2020) · Advanced Materials · doi:10.1002/adma.201906308 · Cited by 476
Chen, R., Qin, G., Zheng, H., Wang, L., Su, Y., Chiu, Y., Ding, H., Guo, J., & Fu, H. (2018) · Acta Materialia · doi:10.1016/j.actamat.2017.10.058 · Cited by 469
Phase Engineering of High‐Entropy Alloys
Chang, X., Zeng, M., Liu, K., & Fu, L. (2020) · Advanced Materials · doi:10.1002/adma.201907226 · Cited by 464
Shi, P., Zhong, Y., Li, Y., Ren, W., Zheng, T., Shen, Z., Yang, B., Peng, J., Hu, P., Zhang, Y., et al. (2020) · Materials Today · doi:10.1016/j.mattod.2020.09.029 · Cited by 464
Mass production of bulk artificial nacre with excellent mechanical properties
Gao, H.-L., Chen, S.-M., Mao, L.-B., Song, Z.-Q., Yao, H.-B., Cölfen, H., Luo, X.-S., Zhang, F., Pan, Z., Meng, Y.-F., et al. (2017) · Nature Communications · doi:10.1038/s41467-017-00392-z · Cited by 443
Nano/Micro‐Manufacturing of Bioinspired Materials: a Review of Methods to Mimic Natural Structures
Zhang, C., Mcadams, D. A., & Grunlan, J. C. (2016) · Advanced Materials · doi:10.1002/adma.201505555 · Cited by 443
Hybrid Hydrogels with Extremely High Stiffness and Toughness
Li, J., Illeperuma, W. R. K., Suo, Z., & Vlassak, J. J. (2014) · ACS Macro Letters · doi:10.1021/mz5002355 · Cited by 437
Nanocellulose: Recent Fundamental Advances and Emerging Biological and Biomimicking Applications
Heise, K., Kontturi, E., Allahverdiyeva, Y., Tammelin, T., Linder, M. B., Nonappa, & Ikkala, O. (2021) · Advanced Materials · doi:10.1002/adma.202004349 · Cited by 425
Yang, W., Chen, I. H., Gludovatz, B., Zimmermann, E. A., Ritchie, R. O., & Meyers, M. A. (2013) · Advanced Materials · doi:10.1002/adma.201202713 · Cited by 426
Self-citationAnomalous scaling law of strength and toughness of cellulose nanopaper
Zhu, H., Zhu, S., Jia, Z., Parvinian, S., Li, Y., Vaaland, O., Hu, L., & Li, T. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1502870112 · Cited by 424
Additive manufacturing of biologically-inspired materials
Studart, A. R. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00836k · Cited by 415
Bai, H., Walsh, F., Gludovatz, B., Delattre, B., Huang, C., Chen, Y., Tomsia, A. P., & Ritchie, R. O. (2016) · Advanced Materials · doi:10.1002/adma.201504313 · Cited by 410
Self-citationBone-like crack resistance in hierarchical metastable nanolaminate steels
Koyama, M., Zhang, Z., Wang, M., Ponge, D., Raabe, D., Tsuzaki, K., Noguchi, H., & Tasan, C. C. (2017) · Science · doi:10.1126/science.aal2766 · Cited by 413
Guo, R., Zhang, Q., Wu, Y., Chen, H., Liu, Y., Wang, J., Duan, X., Chen, Q., Ge, Z., & Zhang, Y. (2023) · Advanced Materials · doi:10.1002/adma.202212130 · Cited by 400
Cui, W., Li, M., Liu, J., Wang, B., Zhang, C., Jiang, L., & Cheng, Q. (2014) · ACS Nano · doi:10.1021/nn503755c · Cited by 401
Mechanical properties and peculiarities of molecular crystals
Awad, W. M., Davies, D. W., Kitagawa, D., Mahmoud Halabi, J., Al-Handawi, M. B., Tahir, I., Tong, F., Campillo-Alvarado, G., Shtukenberg, A. G., Alkhidir, T., et al. (2023) · Chemical Society Reviews · doi:10.1039/d2cs00481j · Cited by 392
Nanoprecipitate‐Strengthened High‐Entropy Alloys
Liu, L., Zhang, Y., Han, J., Wang, X., Jiang, W., Liu, C., Zhang, Z., & Liaw, P. K. (2021) · Advanced Science · doi:10.1002/advs.202100870 · Cited by 393
The microstructure and micromechanics of the tendon–bone insertion
Rossetti, L., Kuntz, L. A., Kunold, E., Schock, J., Müller, K. W., Grabmayr, H., Stolberg-Stolberg, J., Pfeiffer, F., Sieber, S. A., Burgkart, R., et al. (2017) · Nature Materials · doi:10.1038/nmat4863 · Cited by 401
Zhang, X., Liu, W., Yang, D., & Qiu, X. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201806912 · Cited by 385
Magnetically-driven phase transformation strengthening in high entropy alloys
Niu, C., LaRosa, C. R., Miao, J., Mills, M. J., & Ghazisaeidi, M. (2018) · Nature Communications · doi:10.1038/s41467-018-03846-0 · Cited by 393
Overcoming the brittleness of glass through bio-inspiration and micro-architecture
Mirkhalaf, M., Dastjerdi, A. K., & Barthelat, F. (2014) · Nature Communications · doi:10.1038/ncomms4166 · Cited by 384
Fracture and fatigue in additively manufactured metals
Becker, T. H., Kumar, P., & Ramamurty, U. (2021) · Acta Materialia · doi:10.1016/j.actamat.2021.117240 · Cited by 377
An, X. H., Wu, S. D., Wang, Z. G., & Zhang, Z. F. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.11.001 · Cited by 374
Liu, Y. J., Wang, H. L., Li, S. J., Wang, S. G., Wang, W. J., Hou, W. T., Hao, Y. L., Yang, R., & Zhang, L. C. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.12.052 · Cited by 368
Raabe, D., Sandlöbes, S., Millán, J., Ponge, D., Assadi, H., Herbig, M., & Choi, P.-P. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.06.055 · Cited by 370
A Mechanically Robust and Versatile Liquid‐Free Ionic Conductive Elastomer
Yiming, B., Han, Y., Han, Z., Zhang, X., Li, Y., Lian, W., Zhang, M., Yin, J., Sun, T., Wu, Z., et al. (2021) · Advanced Materials · doi:10.1002/adma.202006111 · Cited by 364
NbTaV-(Ti,W) refractory high-entropy alloys: Experiments and modeling
Yao, H. W., Qiao, J. W., Gao, M. C., Hawk, J. A., Ma, S. G., Zhou, H. F., & Zhang, Y. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2016.07.102 · Cited by 361
Zhang, X., Xu, Y., Wang, M., Liu, E., Zhao, N., Shi, C., Lin, D., Zhu, F., & He, C. (2020) · Nature Communications · doi:10.1038/s41467-020-16490-4 · Cited by 355
Transition-metal coordinate bonds for bioinspired macromolecules with tunable mechanical properties
Khare, E., Holten-Andersen, N., & Buehler, M. J. (2021) · Nature Reviews Materials · doi:10.1038/s41578-020-00270-z · Cited by 353
Guan, Q.-F., Yang, H.-B., Han, Z.-M., Zhou, L.-C., Zhu, Y.-B., Ling, Z.-C., Jiang, H.-B., Wang, P.-F., Ma, T., Wu, H.-A., et al. (2020) · Science Advances · doi:10.1126/sciadv.aaz1114 · Cited by 356
Chen, J., Gao, Y., Shi, L., Yu, W., Sun, Z., Zhou, Y., Liu, S., Mao, H., Zhang, D., Lu, T., et al. (2022) · Nature Communications · doi:10.1038/s41467-022-32517-4 · Cited by 325
A dendrite-suppressing composite ion conductor from aramid nanofibres
Tung, S.-O., Ho, S., Yang, M., Zhang, R., & Kotov, N. A. (2015) · Nature Communications · doi:10.1038/ncomms7152 · Cited by 336
Discontinuous crack-bridging model for fracture toughness analysis of nacre
Shao, Y., Zhao, H.-P., Feng, X.-Q., & Gao, H. (2012) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2012.04.011 · Cited by 335
High pressure synthesis of a hexagonal close-packed phase of the high-entropy alloy CrMnFeCoNi
Tracy, C. L., Park, S., Rittman, D. R., Zinkle, S. J., Bei, H., Lang, M., Ewing, R. C., & Mao, W. L. (2017) · Nature Communications · doi:10.1038/ncomms15634 · Cited by 329
The materials science of collagen
Sherman, V. R., Yang, W., & Meyers, M. A. (2015) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2015.05.023 · Cited by 324
Ming, K., Bi, X., & Wang, J. (2018) · International Journal of Plasticity · doi:10.1016/j.ijplas.2017.10.005 · Cited by 330
Fibre-reinforced multifunctional SiC matrix composite materials
Yin, X. W., Cheng, L. F., Zhang, L. T., Travitzky, N., & Greil, P. (2017) · International Materials Reviews · doi:10.1080/09506608.2016.1213939 · Cited by 323
Wang, J., Cheng, Q., Lin, L., & Jiang, L. (2014) · ACS Nano · doi:10.1021/nn406428n · Cited by 325
Jiang, L., Yang, H., Yee, J. K., Mo, X., Topping, T., Lavernia, E. J., & Schoenung, J. M. (2016) · Acta Materialia · doi:10.1016/j.actamat.2015.09.057 · Cited by 323
A Review on High‐Strength Titanium Alloys: Microstructure, Strengthening, and Properties
Kang, L., & Yang, C. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201801359 · Cited by 318
Hao, H., Hutter, T., Boyce, B. L., Watt, J., Liu, P., & Mitlin, D. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00838 · Cited by 314
Recent progress in gradient-structured metals and alloys
Ji, W., Zhou, R., Vivegananthan, P., See Wu, M., Gao, H., & Zhou, K. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101194 · Cited by 313
Polymer matrix nanocomposites for automotive structural components
Naskar, A. K., Keum, J. K., & Boeman, R. G. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2016.262 · Cited by 316
Structure-property relationships from universal signatures of plasticity in disordered solids
Cubuk, E. D., Ivancic, R. J. S., Schoenholz, S. S., Strickland, D. J., Basu, A., Davidson, Z. S., Fontaine, J., Hor, J. L., Huang, Y.-R., Jiang, Y., et al. (2017) · Science · doi:10.1126/science.aai8830 · Cited by 320
Rapid fabrication of physically robust hydrogels
Bao, B., Zeng, Q., Li, K., Wen, J., Zhang, Y., Zheng, Y., Zhou, R., Shi, C., Chen, T., Xiao, C., et al. (2023) · Nature Materials · doi:10.1038/s41563-023-01648-4 · Cited by 293
Zhang, Y. H., Zhuang, Y., Hu, A., Kai, J. J., & Liu, C. T. (2017) · Scripta Materialia · doi:10.1016/j.scriptamat.2016.11.014 · Cited by 313
Bhattacharjee, T., Wani, I. S., Sheikh, S., Clark, I. T., Okawa, T., Guo, S., Bhattacharjee, P. P., & Tsuji, N. (2018) · Scientific Reports · doi:10.1038/s41598-018-21385-y · Cited by 303
Du, X., & Qiao, S. Z. (2015) · Small · doi:10.1002/smll.201401201 · Cited by 302
A Bayesian experimental autonomous researcher for mechanical design
Gongora, A. E., Xu, B., Perry, W., Okoye, C., Riley, P., Reyes, K. G., Morgan, E. F., & Brown, K. A. (2020) · Science Advances · doi:10.1126/sciadv.aaz1708 · Cited by 300
Metadata
- Authors
- Ritchie, R. O.
- Affiliations
- Lawrence Berkeley National Laboratory (US)
- Corresponding author
- Ritchie, Robert O.
- ORCID
- Ritchie, Robert O.
- Venue
- Nature Materials
- Published
- 2011-10-24
- Volume
- 10
- Issue
- 11
- Pages
- 817-822
- ISSN
- 1476-1122 (ISSN-L)
- 1476-4660
- OpenAlex
- W1971974144
- Cited by
- 3,989
- References
- 27
- Citations by year
- 2026: 458 · 2025: 556 · 2024: 474 · 2023: 385 · 2022: 398 · 2021: 332 · 2020: 280 · 2019: 259 · 2018: 242 · 2017: 172 · 2016: 140 · 2015: 120 · 2014: 81 · 2013: 62 · 2012: 30
- FWCI
- 27.12
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- www.springer.com/tdm (vor)
- Locations
- Nature Materials (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Metals and Alloys › Microstructure and mechanical properties
- Physical Sciences › Materials Science › Biomaterials › Calcium Carbonate Crystallization and Inhibition
- Physical Sciences › Materials Science › Metals and Alloys › Metallic Glasses and Amorphous Alloys
- Keywords
- strength-toughness trade-off, damage tolerance, fracture resistance, amorphous alloys, biological materials, advanced ceramics, ductility
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.