The conflicts between strength and toughness
The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Abstract
The attainment of both strength and toughness is a vital requirement for most structural materials; unfortunately these properties are generally mutually exclusive. Although the quest continues for stronger and harder materials, these have little to no use as bulk structural materials without appropriate fracture resistance. It is the lower-strength, and hence higher-toughness, materials that find use for most safety-critical applications where premature or, worse still, catastrophic fracture is unacceptable. For these reasons, the development of strong and tough (damage-tolerant) materials has traditionally been an exercise in compromise between hardness versus ductility. Drawing examples from metallic glasses, natural and biological materials, and structural and biomimetic ceramics, we examine some of the newer strategies in dealing with this conflict. Specifically, we focus on the interplay between the mechanisms that individually contribute to strength and toughness, noting that these phenomena can originate from very different lengthscales in a material's structural architecture. We show how these new and natural materials can defeat the conflict of strength versus toughness and achieve unprecedented levels of damage tolerance within their respective material classes.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Cavitation that frequently observed during stretching was also suppressed due to side constraints according to Ref [27].”
From Simultaneously Toughening and Strengthening of PLA-b-PCL Copolymer via Pressure-induced-flow Processing at Room Temperature (2018) · cites this paper as [27]
In the citing paper
“Polyesterbased TPEs are attractive because of their degradability and synthetic versatility, 5-10 yet they suffer from a fundamental trade-off: enhancing tensile strength often reduces elasticity, while improving stretchability typically compromises strength.11,12”
From Metal-Free Synthesis of Tough PLLA- b -PCVL- b -PLLA Triblock Polyester Thermoplastic Elastomers from Mixed Monomers (2026) · cites this paper as [11]
Citations
Cites
THE MATERIAL BONE: Structure-Mechanical Function Relations
Weiner, S., & Wagner, H. D. (1998) · Annual Review of Materials Science · doi:10.1146/annurev.matsci.28.1.271 · Cited by 2,724
Nabarro, F. R. N., Duesbery, M. S., Hirth, J. P., & Kubin, L. P. (1979) · Cited by 2,675
Freezing as a Path to Build Complex Composites
Deville, S., Saiz, E., Nalla, R. K., & Tomsia, A. P. (2006) · Science · doi:10.1126/science.1120937 · Cited by 1,900
Tough, Bio-Inspired Hybrid Materials
Munch, E., Launey, M. E., Alsem, D. H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2008) · Science · doi:10.1126/science.1164865 · Cited by 1,822 · cited 1×
“Recently, synthetic, yet bioinspired, bulk ceramic materials have been made in the image of the nacre structur”
BackgroundSelf-citationPerspective on the Development of High‐Toughness Ceramics
Evans, A. G. (1990) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1990.tb06493.x · Cited by 1,625 · cited 1×
“A prime example of this is in brittle materials such as ceramics, which invariably cannot be toughened by promoting plasticit”
BackgroundDesigning metallic glass matrix composites with high toughness and tensile ductility
Hofmann, D. C., Suh, J.-Y., Wiest, A., Duan, G., Lind, M.-L., Demetriou, M. D., & Johnson, W. L. (2008) · Nature · doi:10.1038/nature06598 · Cited by 1,501
On the Fracture Toughness of Advanced Materials
Launey, M. E., & Ritchie, R. O. (2009) · Advanced Materials · doi:10.1002/adma.200803322 · Cited by 967
Self-citationRitchie, R. O. (1988) · Materials Science and Engineering: A · doi:10.1016/0025-5416(88)90547-2 · Cited by 874
Self-citationDeformation mechanisms in nacre
Wang, R. Z., Suo, Z., Evans, A. G., Yao, N., & Aksay, I. A. (2001) · Journal of Materials Research · doi:10.1557/jmr.2001.0340 · Cited by 835 · cited 1×
“, the frictional motion between mineral platelets in seashell”
BackgroundOn the Mechanistic Origins of Toughness in Bone
Launey, M. E., Buehler, M. J., & Ritchie, R. O. (2010) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070909-104427 · Cited by 741 · cited 1×
“The origin of the intrinsic (plastic deformation) mechanisms tends to be on the smaller, submicrometre lengthscales, akin to the nanometre scale of dislocation Burgers' vectors in metals, whereas the processes of extrinsic toughening and fracture occur on much coarser lengthscales typically well into the micrometre ra…”
BackgroundSelf-citation
Research works printed but not linked: 1
- Sarikaya, M. & Aksay, I. A. in Results and Problems in Cell Differentiation Vol. 19 (ed. Case, S.) Ch. 1 (Springer, 1992).
Cited by
Items 401–500 of 1,006
Structure and Mechanical Adaptability of a Modern Elasmoid Fish Scale from the Common Carp
Quan, H., Yang, W., Lapeyriere, M., Schaible, E., Ritchie, R. O., & Meyers, M. A. (2020) · Matter · doi:10.1016/j.matt.2020.05.011 · Cited by 95
“By using primarily biopolymers and minerals in an intricate and ingenious hierarchical architecture, the elasmoid scales combine sufficient strength with excellent damage tolerance, properties that are often exclusive to synthetic materials, making these scales high-performance structural materials.(25,26)”
BackgroundSelf-citationHe, X., Feng, L., Zhang, Z., Hou, X., Ye, X., Song, Q., Yang, Y., Suo, G., Zhang, L., Fu, Q., et al. (2021) · ACS Nano · doi:10.1021/acsnano.0c08924 · Cited by 96
Sangiovanni, D. G., Mellor, W. M., Harrington, T., Kaufmann, K., & Vecchio, K. S. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.109932 · Cited by 104
“In fact, the combination of high strength and excellent fracture resistance – which equates to superior toughness – is generally unattainable for a monolithic solid ceramic phase [36].”
BackgroundBulk metallic glass composites containing B2 phase
Chen, Y., Tang, C., & Jiang, J. Z. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100799 · Cited by 96
Meng, Y., Zhu, Y., Zhou, L., Meng, X., Yang, Y., Zhao, R., Xia, J., Yang, B., Lu, Y., Wu, H., et al. (2021) · Advanced Materials · doi:10.1002/adma.202108267 · Cited by 99
Chen, Q., Wu, F., Jiang, Z., Zhang, H., Yuan, J., Xiang, Y., & Liu, Y. (2023) · Composites Part B Engineering · doi:10.1016/j.compositesb.2023.110503 · Cited by 98
Topology in soft and biological matter
Tubiana, L., Alexander, G. P., Barbensi, A., Buck, D., Cartwright, J. H. E., Chwastyk, M., Cieplak, M., Coluzza, I., Čopar, S., Craik, D. J., et al. (2024) · Physics Reports · doi:10.1016/j.physrep.2024.04.002 · Cited by 128
Dan, X., Ren, C., Song, Z., Waqar, S., Zhang, D., Wang, M., Liu, Q., Sun, Y., Chen, X., Jiang, W., et al. (2024) · Acta Materialia · doi:10.1016/j.actamat.2024.120395 · Cited by 96
Cao, F., Munroe, P. R., Zhou, Z., & Xie, Z. (2017) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2017.12.021 · Cited by 95
Highly-aligned cellulose fibers reinforced epoxy composites derived from bulk natural bamboo
Kalali, E. N., Hu, Y., Wang, X., Song, L., & Xing, W. (2018) · Industrial Crops and Products · doi:10.1016/j.indcrop.2018.11.063 · Cited by 96
Diao, Y., Yan, L., & Gao, K. (2021) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2021.09.004 · Cited by 98
Critical damage events of 3D printed AlSi10Mg alloy via in situ synchrotron X-ray tomography
Wu, Z., Wu, S., Kruzic, J. J., Hu, Y., Yu, H., Zhang, X., Li, X., Wang, Q., Kang, G., & Withers, P. J. (2024) · Acta Materialia · doi:10.1016/j.actamat.2024.120464 · Cited by 95
Kim, W., Choi, J., Kim, J.-H., Kim, T., Lee, C., Lee, S., Kim, M., Kim, B. J., & Kim, T. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b00172 · Cited by 94
Strength and toughness of adhesion of soft materials measured in lap shear
Wang, Y., Yang, X., Nian, G., & Suo, Z. (2020) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2020.103988 · Cited by 104
“Strength and toughness are independent properties ( Ritchie, 2011 ).”
BackgroundRole of stress-induced martensite on damage behavior in a metastable titanium alloy
Xiao, J. F., Shang, X., Hou, J., Li, Y., & He, B. (2021) · International Journal of Plasticity · doi:10.1016/j.ijplas.2021.103103 · Cited by 94
Chen, S., Zhang, J., Guan, S., Li, T., Liu, J. Q., Wu, F., & Wu, Y. (2022) · Materials Science and Engineering A · doi:10.1016/j.msea.2022.142701 · Cited by 97
Wang, Y., Jiang, X., Li, X., Ding, K., Liu, X., Huang, B., Ding, J., Qu, K., Sun, W., Xue, Z., et al. (2023) · Materials Horizons · doi:10.1039/d3mh00326d · Cited by 98
Overcoming strength-ductility tradeoff with high pressure thermal treatment
Tang, Y., Wang, H., Ouyang, X., Wang, C., Huang, Q., Zhao, Q., Liu, X. C., Zhu, Q. F., Hou, Z., Wu, J., et al. (2024) · Nature Communications · doi:10.1038/s41467-024-48435-6 · Cited by 94
Boskey, A. L., Donnelly, E. L., Boskey, E. R., Spevak, L., Ma, Y., Zhang, W., Lappe, J. M., & Recker, R. R. (2015) · Journal of Bone and Mineral Research · doi:10.1002/jbmr.2759 · Cited by 97
“This contention was based on the observations that regions of heterogeneous material properties act as intrinsic toughening mechanisms in bone((71,72)) and that microcracks stop proliferating at cement lines or other barriers.”
BackgroundAnnealing effect on microstructure and mechanical properties of Al/Ti/Al laminate sheets
Yu, H., Lü, C., Tieu, A. K., Li, H., Godbole, A., & Kong, C. (2016) · Materials Science and Engineering A · doi:10.1016/j.msea.2016.02.087 · Cited by 95
3D-printing and mechanics of bio-inspired articulated and multi-material structures
Porter, M. M., Ravikumar, N., Barthelat, F., & Martini, R. (2016) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2016.12.016 · Cited by 105
Ductile fracture in notched bulk metallic glasses
Pan, J., Wang, Y., & Li, Y. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.06.048 · Cited by 94
Papkov, D., Delpouve, N., Delbreilh, L., Araujo, S., Stockdale, T. A., Mamedov, S., Maleckis, K., Zou, Y., Andalib, M. N., Dargent, É., et al. (2019) · ACS Nano · doi:10.1021/acsnano.8b08725 · Cited by 95
Manufacturing carbon fibres from pitch and polyethylene blend precursors: a review
Aldosari, S. M., Khan, M., & Rahatekar, S. S. (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2020.05.037 · Cited by 93
“A number of natural materials are dependent on both intrinsic and extrinsic toughening and provide excellent examples of damage tolerant materials, one of which is seashells [67].”
BackgroundFast fabrication of a hierarchical nanostructured multifunctional ferromagnet
Hua, Y., Li, X., Li, J., Luo, X., Li, Y., Qin, W., Zhang, L., Xiao, J., Xia, W., Song, P., et al. (2024) · Science · doi:10.1126/science.adp2328 · Cited by 93
Grain size dependence of fracture toughness and crack-growth resistance of superelastic NiTi
Ahadi, A., & Sun, Q. (2015) · Scripta Materialia · doi:10.1016/j.scriptamat.2015.10.036 · Cited by 93
Rong, X., Zhang, X., Zhao, D., He, C., Shi, C., Liu, E., & Zhao, N. (2021) · Scripta Materialia · doi:10.1016/j.scriptamat.2021.113825 · Cited by 92
Study on the intrinsic factors determining impact toughness of TC21 alloy
Lei, L., Zhao, Q., Zhao, Y., Huang, S., Wu, C., Jia, W., & Zeng, W. (2021) · Materials Characterization · doi:10.1016/j.matchar.2021.111164 · Cited by 92
Xie, Y., Pan, Y., & Cai, P. (2021) · Industrial Crops and Products · doi:10.1016/j.indcrop.2021.114381 · Cited by 93
Nanostructure and Microstructure Fabrication: From Desired Properties to Suitable Processes
van Assenbergh, P., Meinders, E. R., Geraedts, J. M. P., & Dodou, D. (2018) · Small · doi:10.1002/smll.201703401 · Cited by 99
Learning from nature: Use material architecture to break the performance tradeoffs
Jia, Z., Yu, Y., & Wang, L. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107650 · Cited by 93
Electrically Conducting and Mechanically Strong Graphene–Polylactic Acid Composites for 3D Printing
Kim, M., Jeong, J. H., Lee, J., Capasso, A., Bonaccorso, F., Kang, S.-H., Lee, Y., & Lee, G. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b03241 · Cited by 91
Chen, Y., Wang, S., Xiong, J., Wu, G., Gao, J., Wu, Y., Ma, G., Wu, H., & Mao, X. (2022) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2022.05.051 · Cited by 94
Achieving ultrahigh strength and ductility in high-entropy alloys via dual precipitation
Guo, J. M., Zhou, B. C., Qiu, S. Y., Kong, H., Niu, M., Luan, J., Zhang, T., Wu, H. P., & Jiao, Z. (2023) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2023.05.021 · Cited by 91
Liu, B., Huang, L. J., Rong, X., Geng, L., & Yin, F. (2016) · Composites Science and Technology · doi:10.1016/j.compscitech.2016.02.011 · Cited by 91
Zhang, Q., Zhang, F., Xu, X. Q., Zhou, C., & Lin, D. L. (2018) · ACS Nano · doi:10.1021/acsnano.7b06095 · Cited by 90
Wang, J., Tao, N. R., & Lu, K. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.09.021 · Cited by 90
Exploring Large Ductility in Cellulose Nanopaper Combining High Toughness and Strength
Chen, F., Xiang, W., Sawada, D., Bai, L., Hummel, M., Sixta, H., & Budtova, T. (2020) · ACS Nano · doi:10.1021/acsnano.0c02302 · Cited by 90
Zhao, P., Li, J., & Wang, Y. (2012) · International Journal of Plasticity · doi:10.1016/j.ijplas.2012.06.007 · Cited by 90
“The second physical effect is strain-induced softening which has been observed experimentally (Xi et al., 2005; Bei et al., 2006; Nagendra et al., 2000).”
BackgroundDislocation evolution and peak spall strengths in single crystal and nanocrystalline Cu
Mackenchery, K., Valisetty, R. R., Namburu, R. R., Stukowski, A., Rajendran, A. M., & Dongare, A. M. (2016) · Journal of Applied Physics · doi:10.1063/1.4939867 · Cited by 90
Kumar, S., Wardle, B. L., & Arif, M. F. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b13038 · Cited by 91
Chazot, C. A. C., & Hart, A. J. (2019) · Composites Science and Technology · doi:10.1016/j.compscitech.2019.107795 · Cited by 89
Architecturing materials at mesoscale: some current trends
Estrin, Y., Beygelzimer, Y., Kulagin, R., Gumbsch, P., Fratzl, P., Zhu, Y. T., & Hahn, H. (2021) · Materials Research Letters · doi:10.1080/21663831.2021.1961908 · Cited by 93
“Structural materials can acquire conflicting properties such as toughness and strength [88], and tough materials can be generated in a bioinspired way based on brit-tle constituents [89,90].”
Enhancing strength and ductility via crystalline-amorphous nanoarchitectures in TiZr-based alloys
Ming, K., Zhu, Z., Zhu, W., Fang, B., Wei, B., Liaw, P. K., Wei, X., Wang, J., & Zheng, S. (2022) · Science Advances · doi:10.1126/sciadv.abm2884 · Cited by 89
Xu, J., Wang, X., Ruan, H., Zhang, X., Zhang, Y., Yang, Z., Wang, Q., & Wang, T. (2022) · Polymer Chemistry · doi:10.1039/d2py00269h · Cited by 90
Yu, H., & Zhu, Y. (2024) · Chemical Society Reviews · doi:10.1039/d2cs00513a · Cited by 93
Ultra-strong and ductile medium entropy alloy with a dual heterogeneous microstructure
Amar, A., Wang, M., Huang, R., Zhang, L., & Lu, Y. (2024) · Acta Materialia · doi:10.1016/j.actamat.2024.120645 · Cited by 89
Elsharkawy, S., & Mata, Á. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201800178 · Cited by 93
Seow, C. E., Zhang, J., Coules, H., Wu, G., Jones, C. P., Ding, J., & Williams, S. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101578 · Cited by 88
“Crack deflection, which is one of several toughening mechanisms in materials [44], effectively reduces the crack driving force [45], leading to a higher apparent fracture toughness.”
BackgroundBioinspired hierarchical Al2O3/Al laminated composite fabricated by flake powder metallurgy
Zhang, Z., Li, Z., Tan, Z., Zhao, H., Fan, G., Xu, Y., Xiong, D., & Li, Z. (2020) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2020.106187 · Cited by 93
Temperature-induced wear transition in ceramic-metal composites
Lou, M., Chen, X., Xu, K., Deng, Z., Chen, L., Lv, J., Chang, K., & Wang, L. (2020) · Acta Materialia · doi:10.1016/j.actamat.2020.116545 · Cited by 88
Wilkerson, R., Gludovatz, B., Watts, J., Tomsia, A. P., Hilmas, G. E., & Ritchie, R. O. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.01.046 · Cited by 88
Self-citationKhakalo, A., Tanaka, A., Korpela, A., & Orelma, H. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c02221 · Cited by 95
Bottom-up approaches to engineered living materials: Challenges and future directions
Molinari, S., Tesoriero, R. F., & Ajo-Franklin, C. M. (2021) · Matter · doi:10.1016/j.matt.2021.08.001 · Cited by 98
Wu, F., Qiang, S., Zhang, X., Wang, F., Yin, X., Liu, L., Yu, J., Liu, Y., & Ding, B. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202207130 · Cited by 87
Enhanced strength-ductility synergy of medium-entropy alloys via multiple level gradient structures
Zhang, X., Gui, Y., Lai, M., Lü, X., Gu, J., Wang, F., Yang, T., Wang, Z., & Song, M. J. (2023) · International Journal of Plasticity · doi:10.1016/j.ijplas.2023.103592 · Cited by 87
Daniel, R., Meindlhumer, M., Zálešák, J., Sartory, B., Zeilinger, A., Mitterer, C., & Kečkéš, J. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.05.029 · Cited by 89
Matizamhuka, W. R. (2016) · Journal of the Southern African Institute of Mining and Metallurgy · doi:10.17159/2411-9717/2016/v116n12a12 · Cited by 87
Shi, X., Yao, W., Liu, D., Xia, K., Tang, T., & Shi, Y. (2018) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2018.11.027 · Cited by 86
Rupture of 3D-printed hyperelastic composites: Experiments and phase field fracture modeling
Russ, J. B., Slesarenko, V., Rudykh, S., & Waisman, H. (2020) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2020.103941 · Cited by 86
“However, while the addition of inclusions in a polymer matrix may enhance its strength (resistance to non-recoverable deformation), it may also decrease its toughness (resistance to fracture) ( Ritchie, 2011 ).”
BackgroundPönitzsch, A., Nofz, M., Wondraczek, L., & Deubener, J. M. (2015) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2015.12.002 · Cited by 89
Optimizing Bulk Metallic Glasses for Robust, Highly Wear‐Resistant Gears
Hofmann, D. C., Andersen, L. M., Kolodziejska, J. A., Roberts, S. N., Borgonia, J. P., Johnson, W. L., Vecchio, K. S., & Kennett, A. (2016) · Advanced Engineering Materials · doi:10.1002/adem.201600541 · Cited by 86
Intrinsic impact toughness of relatively high strength alloys
Duan, Q. Q., Qu, R. T., Zhang, P., Zhang, Z. J., & Zhang, Z. F. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.09.064 · Cited by 85
Zhou, P., Song, Y., Hua, L., Lu, J., Zhang, J., & Wang, F. (2019) · Materials Science and Engineering A · doi:10.1016/j.msea.2019.05.071 · Cited by 85
Liu, H., Sun, C., Wang, C., Li, Y., Bai, J., Xue, F., Ma, A., & Jiang, J. (2020) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2020.02.092 · Cited by 85
Tough and Strong: Cross-Lamella Design Imparts Multifunctionality to Biomimetic Nacre
Raut, H. K., Schwartzman, A. F., Das, R., Liu, F., Wang, L., Ross, C. A., & Fernandez, J. G. (2020) · ACS Nano · doi:10.1021/acsnano.0c01511 · Cited by 86
“One key property of structural bio-composites is their multifunctionality, which enables a single material to perform satisfactorily in the many multidimensional loading scenarios that an organism may face during its life.(3) Mollusk shells, fish scales, arthropod exoskeletons, mammalian bones, and sponge spicules are…”
BackgroundWu, C., Zhao, Y., Huang, S., Lei, L., Zhao, Q., Sun, Q., & Zhou, L. (2021) · Materials Characterization · doi:10.1016/j.matchar.2021.111103 · Cited by 85
Liu, Y., Lim, C. V. S., Chen, D., Huang, A. J., & Weyland, M. (2021) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2021.04.032 · Cited by 85
Yan, T., Zhang, L., Yuan, X., Li, B., Bai, J., Fu, H., Zhang, H., & Zhang, H. (2025) · Acta Materialia · doi:10.1016/j.actamat.2025.121018 · Cited by 85
Bioinspired Hybrid Materials from Spray‐Formed Ceramic Templates
Dwivedi, G., Flynn, K., Resnick, M., Sampath, S., & Gouldstone, A. (2015) · Advanced Materials · doi:10.1002/adma.201500303 · Cited by 87
Mirkhalaf, M., Sunesara, A., Ashrafi, B., & Barthelat, F. (2018) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2018.08.025 · Cited by 85
ZrO2 Matrix Toughened Ceramic Material‐Strength and Toughness
Qi, B., Liang, S., Li, Y., Zhou, C., Yu, H., & Li, J. (2022) · Advanced Engineering Materials · doi:10.1002/adem.202101278 · Cited by 87
Zhang, L., Wang, B., Song, B., Yao, Y., Choi, S.-K., Cao, Y., & Shi, Y. (2022) · Bioactive Materials · doi:10.1016/j.bioactmat.2022.07.009 · Cited by 91
Bio-inspired interfacial strengthening strategy through geometrically interlocking designs
Zhang, Y., Yao, H., Christine Ortiz, B., Xu, J., & Dao, M. (2012) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2012.07.006 · Cited by 90
Mechanical Stability of Surface Architecture—Consequences for Superhydrophobicity
Dyett, B., Wu, A. H.-F., & Lamb, R. N. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am505487r · Cited by 89
Cao, W., Zhang, M., Huang, C., Xiao, S., Han, D. H., & Weng, Y. (2017) · Scientific Reports · doi:10.1038/srep41459 · Cited by 84
Mechanisms of Failure in Nanoscale Metallic Glass
Gu, X. W., Jafary‐Zadeh, M., Chen, D. Z., Wu, Z., Zhang, Y., Srolovitz, D. J., & Greer, J. R. (2014) · Nano Letters · doi:10.1021/nl5027869 · Cited by 97
Arapaima Fish Scale: One of the Toughest Flexible Biological Materials
Yang, W., Quan, H., Meyers, M. A., & Ritchie, R. O. (2019) · Matter · doi:10.1016/j.matt.2019.09.014 · Cited by 97
Self-citationZhang, M., Li, M., Wang, S., Chi, J., Ren, L., Fang, M. X., & Zhou, C. Y. (2020) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2020.106043 · Cited by 83
Bernhard, A., Milovanovic, P. D., Zimmermann, E. A., Hahn, M. P., Djonić, D., Krause, M., Breer, S., Püschel, K., Djuric, M. P., Amling, M., et al. (2013) · Osteoporosis International · doi:10.1007/s00198-013-2374-x · Cited by 86
Biomimetic Materials by Freeze Casting
Porter, M. M., McKittrick, J. M., & Meyers, M. A. (2013) · JOM · doi:10.1007/s11837-013-0606-3 · Cited by 93
Rodriguez‐Suarez, T., Bartolomé, J. F., & Moya, J. S. (2012) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2012.06.026 · Cited by 83
Bone Material Properties in Osteogenesis Imperfecta
Bishop, N. (2016) · Journal of Bone and Mineral Research · doi:10.1002/jbmr.2835 · Cited by 84
“(68) A multiscale model summarizing toughening mechanisms has been proposed by Ritchie.”
BackgroundMethodCrack driving force in twisted plywood structures
Fischer, F. D., Kolednik, O., Predan, J., Razi, H., & Fratzl, P. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.04.007 · Cited by 87
Gao, F., Zhang, N., Fang, X., & Ma, M. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b00717 · Cited by 81
Co-inspired hydroxyapatite-based scaffolds for vascularized bone regeneration
Feng, C., Xue, J., Yu, X., Zhai, D., Lin, R., Zhang, M., Xia, L., Wang, X., Yao, Q., Chang, J., et al. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.11.010 · Cited by 87
Doan, D.-Q., Fang, T., & Chen, T. (2021) · Intermetallics · doi:10.1016/j.intermet.2020.107079 · Cited by 81
Huang, D. J., & Li, H. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.109606 · Cited by 85
Relation Between Strength and Hardness of High-Entropy Alloys
Fan, X., Qu, R. T., & Zhang, Z. (2021) · Acta Metallurgica Sinica (English Letters) · doi:10.1007/s40195-021-01252-y · Cited by 81
Natural load-bearing protein materials
Harrington, M. J., & Fratzl, P. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100767 · Cited by 87
Yin, J., Xiao, H., Xu, P., Yang, J., Fan, Z., Ke, Y., Ouyang, X., Liu, G. X., Sun, T. L., Tang, L., et al. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202108196 · Cited by 83
Multifunctional Hard Yet Flexible Coatings Fabricated Using a Universal Step‐by‐Step Strategy
Zhang, Y., Chen, Z., Zheng, H., Chen, R., Ma, C., & Zhang, G. (2022) · Advanced Science · doi:10.1002/advs.202200268 · Cited by 82
Unraveling the deformation behavior of the Fe45Co25Ni10V20 high entropy alloy
Li, Y. X., Nutor, R. K., Zhao, Q., Zhang, X., Cao, Q. P., Sohn, S. S., Wang, X. D., Ding, S. Q., Zhang, D. X., Zhou, H. F., et al. (2023) · International Journal of Plasticity · doi:10.1016/j.ijplas.2023.103619 · Cited by 82
Deformable hard tissue with high fatigue resistance in the hinge of bivalve Cristaria plicata
Meng, X., Zhou, L., Liu, L., Zhu, Y., Meng, Y., Zheng, D., Yang, B., Rao, Q.-Z., Mao, L., Wu, H., et al. (2023) · Science · doi:10.1126/science.ade2038 · Cited by 80
Damage tolerance of nuclear graphite at elevated temperatures
Liu, D., Gludovatz, B., Barnard, H. S., Kuball, M., & Ritchie, R. O. (2017) · Nature Communications · doi:10.1038/ncomms15942 · Cited by 80
Self-citationBabuska, T. F., Wilson, M. A., Johnson, K. L., Whetten, S., Curry, J. F., Rodelas, J., Atkinson, C., Lu, P., Chandross, M., Krick, B. A., et al. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.08.044 · Cited by 81
Hierarchical Toughening of a Biomimetic Bulk Cement Composite
Pan, H., She, W., Zuo, W., Zhou, Y., Huang, J., Zhang, Z., Geng, Z., Yao, Y., Zhang, W., Zheng, L., et al. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c15313 · Cited by 79
Design and development of CoCrFeNiTa eutectic high entropy alloys
Mukarram, M., Mujahid, M., & Yaqoob, K. (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2020.12.042 · Cited by 80
Zhang, Z., Gao, H., Wen, S., Pang, J., Zhang, S., Cui, C., Wang, Z., & Yu, S. (2023) · Advanced Materials · doi:10.1002/adma.202209510 · Cited by 82
Liu, L., Li, S., Pan, D., Hui, D., Zhang, X., Li, B., Liang, T., Shi, P., Bahador, A., Umeda, J., et al. (2023) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2302234120 · Cited by 79
“Pursuing high strength and high ductility in metallic materials has been a lasting endeavor for advanced engineering applications (1–3).”
Background
Metadata
- Authors
- Ritchie, R. O.
- Affiliations
- Lawrence Berkeley National Laboratory (US)
- Corresponding author
- Ritchie, Robert O.
- ORCID
- Ritchie, Robert O.
- Venue
- Nature Materials
- Published
- 2011-10-24
- Volume
- 10
- Issue
- 11
- Pages
- 817-822
- ISSN
- 1476-1122 (ISSN-L)
- 1476-4660
- OpenAlex
- W1971974144
- Cited by
- 3,989
- References
- 27
- Citations by year
- 2026: 458 · 2025: 556 · 2024: 474 · 2023: 385 · 2022: 398 · 2021: 332 · 2020: 280 · 2019: 259 · 2018: 242 · 2017: 172 · 2016: 140 · 2015: 120 · 2014: 81 · 2013: 62 · 2012: 30
- FWCI
- 27.12
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- www.springer.com/tdm (vor)
- Locations
- Nature Materials (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Metals and Alloys › Microstructure and mechanical properties
- Physical Sciences › Materials Science › Biomaterials › Calcium Carbonate Crystallization and Inhibition
- Physical Sciences › Materials Science › Metals and Alloys › Metallic Glasses and Amorphous Alloys
- Keywords
- strength-toughness trade-off, damage tolerance, fracture resistance, amorphous alloys, biological materials, advanced ceramics, ductility
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.