The conflicts between strength and toughness
The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Abstract
The attainment of both strength and toughness is a vital requirement for most structural materials; unfortunately these properties are generally mutually exclusive. Although the quest continues for stronger and harder materials, these have little to no use as bulk structural materials without appropriate fracture resistance. It is the lower-strength, and hence higher-toughness, materials that find use for most safety-critical applications where premature or, worse still, catastrophic fracture is unacceptable. For these reasons, the development of strong and tough (damage-tolerant) materials has traditionally been an exercise in compromise between hardness versus ductility. Drawing examples from metallic glasses, natural and biological materials, and structural and biomimetic ceramics, we examine some of the newer strategies in dealing with this conflict. Specifically, we focus on the interplay between the mechanisms that individually contribute to strength and toughness, noting that these phenomena can originate from very different lengthscales in a material's structural architecture. We show how these new and natural materials can defeat the conflict of strength versus toughness and achieve unprecedented levels of damage tolerance within their respective material classes.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Cavitation that frequently observed during stretching was also suppressed due to side constraints according to Ref [27].”
From Simultaneously Toughening and Strengthening of PLA-b-PCL Copolymer via Pressure-induced-flow Processing at Room Temperature (2018) · cites this paper as [27]
In the citing paper
“Polyesterbased TPEs are attractive because of their degradability and synthetic versatility, 5-10 yet they suffer from a fundamental trade-off: enhancing tensile strength often reduces elasticity, while improving stretchability typically compromises strength.11,12”
From Metal-Free Synthesis of Tough PLLA- b -PCVL- b -PLLA Triblock Polyester Thermoplastic Elastomers from Mixed Monomers (2026) · cites this paper as [11]
Citations
Cites
THE MATERIAL BONE: Structure-Mechanical Function Relations
Weiner, S., & Wagner, H. D. (1998) · Annual Review of Materials Science · doi:10.1146/annurev.matsci.28.1.271 · Cited by 2,724
Nabarro, F. R. N., Duesbery, M. S., Hirth, J. P., & Kubin, L. P. (1979) · Cited by 2,675
Freezing as a Path to Build Complex Composites
Deville, S., Saiz, E., Nalla, R. K., & Tomsia, A. P. (2006) · Science · doi:10.1126/science.1120937 · Cited by 1,900
Tough, Bio-Inspired Hybrid Materials
Munch, E., Launey, M. E., Alsem, D. H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2008) · Science · doi:10.1126/science.1164865 · Cited by 1,822 · cited 1×
“Recently, synthetic, yet bioinspired, bulk ceramic materials have been made in the image of the nacre structur”
BackgroundSelf-citationPerspective on the Development of High‐Toughness Ceramics
Evans, A. G. (1990) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1990.tb06493.x · Cited by 1,625 · cited 1×
“A prime example of this is in brittle materials such as ceramics, which invariably cannot be toughened by promoting plasticit”
BackgroundDesigning metallic glass matrix composites with high toughness and tensile ductility
Hofmann, D. C., Suh, J.-Y., Wiest, A., Duan, G., Lind, M.-L., Demetriou, M. D., & Johnson, W. L. (2008) · Nature · doi:10.1038/nature06598 · Cited by 1,501
On the Fracture Toughness of Advanced Materials
Launey, M. E., & Ritchie, R. O. (2009) · Advanced Materials · doi:10.1002/adma.200803322 · Cited by 967
Self-citationRitchie, R. O. (1988) · Materials Science and Engineering: A · doi:10.1016/0025-5416(88)90547-2 · Cited by 874
Self-citationDeformation mechanisms in nacre
Wang, R. Z., Suo, Z., Evans, A. G., Yao, N., & Aksay, I. A. (2001) · Journal of Materials Research · doi:10.1557/jmr.2001.0340 · Cited by 835 · cited 1×
“, the frictional motion between mineral platelets in seashell”
BackgroundOn the Mechanistic Origins of Toughness in Bone
Launey, M. E., Buehler, M. J., & Ritchie, R. O. (2010) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070909-104427 · Cited by 741 · cited 1×
“The origin of the intrinsic (plastic deformation) mechanisms tends to be on the smaller, submicrometre lengthscales, akin to the nanometre scale of dislocation Burgers' vectors in metals, whereas the processes of extrinsic toughening and fracture occur on much coarser lengthscales typically well into the micrometre ra…”
BackgroundSelf-citation
Research works printed but not linked: 1
- Sarikaya, M. & Aksay, I. A. in Results and Problems in Cell Differentiation Vol. 19 (ed. Case, S.) Ch. 1 (Springer, 1992).
Cited by
Items 501–600 of 1,006
Liu, Z., Liu, G., Qu, R. T., Zhang, Z. F., Wu, S., & Zhang, T. (2014) · Scientific Reports · doi:10.1038/srep04167 · Cited by 79
Monn, M. A., Weaver, J. C., Zhang, T., Aizenberg, J., & Kesari, H. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1415502112 · Cited by 87
Wu, W., Lu, Z., Lu, C., Sun, X., Ni, B., Cölfen, H., & Xiong, R. (2023) · ACS Nano · doi:10.1021/acsnano.2c12385 · Cited by 78
Zhang, K., Huang, S., Wang, J., & Liu, G. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125211 · Cited by 77
Biomineralized Materials as Model Systems for Structural Composites: 3D Architecture
Jia, Z., Deng, Z., & Li, L. (2022) · Advanced Materials · doi:10.1002/adma.202106259 · Cited by 82
Pahlavani, H., Amani, M., Saldívar, M. C., Zhou, J., Mirzaali, M. J., & ZADPOOR, A. A. (2022) · Communications Materials · doi:10.1038/s43246-022-00270-2 · Cited by 79
Oxygen-gradient titanium with high strength, strain hardening and toughness
Wang, X.-Q., & Han, W. (2023) · Acta Materialia · doi:10.1016/j.actamat.2023.118674 · Cited by 77
Ultrahigh toughness zirconia ceramics
Matsui, K., Hosoi, K., Feng, B., Yoshida, H., & Ikuhara, Y. (2023) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2304498120 · Cited by 77
Polymer Composites in 3D/4D Printing: Materials, Advances, and Prospects
Mahmood, A., Perveen, F., Chen, S., Akram, T., & Irfan, A. (2024) · Molecules · doi:10.3390/molecules29020319 · Cited by 94
“High strength and toughness are fundamental requirements for a wide range of engineering materials, but they often exhibit a mutually exclusive relationship [128].”
BackgroundExploring the Potential of Nonclassical Crystallization Pathways to Advance Cementitious Materials
Ruiz‐Agudo, C., & Cölfen, H. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00259 · Cited by 81
Zhang, J., Zhang, M., Wan, H., Zhou, J., & Lu, A. (2025) · Nature Communications · doi:10.1038/s41467-024-55245-3 · Cited by 88
Zhu, B., Merindol, R., Benítez, A., Wang, B., & Walther, A. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b00410 · Cited by 77
Meng, L., Wang, X., Ning, J., Hu, X., Fan, G., & Wu, K. (2018) · Carbon · doi:10.1016/j.carbon.2018.01.006 · Cited by 77
Peng, H., Baker, I. A., Hu, L., & Li, L. (2021) · Scripta Materialia · doi:10.1016/j.scriptamat.2021.114278 · Cited by 76
Wei, S., Kumar, P., Lau, K. B., Wuu, D., Liew, L.-L., Wei, F., Teo, S. L., Cheong, A. K. H., Ng, C. K., Zhang, B., et al. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.103190 · Cited by 96
Ultra-stable and tough bioinspired crack-based tactile sensor for small legged robots
Kim, T., Hong, I., Kim, M., Im, S., Roh, Y., Kim, C., Lim, J., Kim, D.-J., Park, J., Lee, S., et al. (2023) · npj Flexible Electronics · doi:10.1038/s41528-023-00255-2 · Cited by 83
Jiang, Y. P., Zhan, D., Zhang, M., Zhu, Y., Zhong, H., Wu, Y., Tan, Q., Dong, X., Zhang, D., & Hadjichristidis, N. (2023) · Angewandte Chemie International Edition · doi:10.1002/anie.202310832 · Cited by 76
Nacre-like surface nanolaminates enhance fatigue resistance of pure titanium
Zhang, Y., He, C., Yu, Q., Li, X., Wang, X., Zhang, Y., Wang, J., Jiang, C., Jia, Y.-F., Zhang, X., et al. (2024) · Nature Communications · doi:10.1038/s41467-024-51423-5 · Cited by 76
Self-citationAtomic and vibrational origins of mechanical toughness in bioactive cement during setting
Tian, K. V., Yang, B., Yue, Y., Bowron, D. T., Mayers, J., Donnan, R. S., Dobó‐Nagy, C., Nicholson, J. W., Fang, D., Greer, A. L., et al. (2015) · Nature Communications · doi:10.1038/ncomms9631 · Cited by 76
Reiser, J., Hoffmann, J., Jäntsch, U., Klimenkov, M., Bonk, S., Bonnekoh, C., Hoffmann, A., Mrotzek, T., & Rieth, M. (2016) · International Journal of Refractory Metals and Hard Materials · doi:10.1016/j.ijrmhm.2016.10.018 · Cited by 76
Natural hydrogel in American lobster: A soft armor with high toughness and strength
Wu, J., Zhao Qin, A., Qu, L., Zhang, H., Deng, F., & Guo, M. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.01.067 · Cited by 78
Oñate, Á., Salgado, A. S., & Berrio, M. E. (2020) · Intermetallics · doi:10.1016/j.intermet.2020.106850 · Cited by 75
Huang, D. J., & Zhuang, Y. (2021) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2021.08.061 · Cited by 75
Making low-alloyed steel strong and tough by designing a dual-phase layered structure
Sun, J., Wang, H., Xu, B., Jiang, L., Guo, S., Sun, X., Yu, D., Liu, F., & Liu, Y. (2022) · Acta Materialia · doi:10.1016/j.actamat.2022.117701 · Cited by 75
Optimized structures for vibration attenuation and sound control in nature: A review
Bosia, F., Poggetto, V. F. D., Gliozzi, A. S., Greco, G. H., Lott, M., Miniaci, M., Ongaro, F., Onorato, M., Seyyedizadeh, S. F., Tortello, M., et al. (2022) · Matter · doi:10.1016/j.matt.2022.07.023 · Cited by 78
“In these examples, a hierarchical architecture has often been proved to be the responsible for many energy dissipation and crack deflection mechanisms over various size scales, simultaneously contributing to exceptional toughness[2].”
BackgroundLi, L., Peng, J., Tang, S., Fang, Q., & Wei, Y. (2024) · International Journal of Plasticity · doi:10.1016/j.ijplas.2024.103970 · Cited by 76
Yu, H., Su, L., Lü, C., Tieu, A. K., Li, H., Li, J., Godbole, A., & Kong, C. (2016) · Materials Science and Engineering A · doi:10.1016/j.msea.2016.08.003 · Cited by 75
“Generally, the strength and the ductility of UFG materials are conflicting properties [32]: ductility of materials will generally reduce with higher strength.”
BackgroundBinary Cellulose Nanocrystal Blends for Bioinspired Damage Tolerant Photonic Films
Natarajan, B., Krishnamurthy, A., Qin, X., Emiroglu, C. D., Forster, A. L., Foster, E. J., Weder, C., Fox, D. M., Keten, S., Obrzut, J., et al. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201800032 · Cited by 79
On flaw tolerance of nacre: a theoretical study
Shao, Y., Zhao, H.-P., & Feng, X. (2014) · Journal of The Royal Society Interface · doi:10.1098/rsif.2013.1016 · Cited by 76
Peng, H., Hu, L., Li, L., Gao, J., & Zhang, Q. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.152750 · Cited by 74
Liu, J., Wang, X., Singh, A. P., Xu, H., Kong, F., & Yang, F. (2021) · Metals · doi:10.3390/met11122054 · Cited by 77
Jiang, W., Zhu, Y. T., & Zhao, Y. (2022) · Frontiers in Materials · doi:10.3389/fmats.2021.792359 · Cited by 74
“FIGURE 1 | Traditional strength–ductility trade-off relationship in pure (A) Ti and (B) Cu (Wang et al., 2002; Ritchie, 2011; Wu et al., 2015; Shahmir et al., 2016).”
BackgroundWang, Q., Chen, S., Zeng, S., Chen, P., Xu, Y., Nie, W., & Zhou, Y. (2022) · Composites Part B Engineering · doi:10.1016/j.compositesb.2022.110092 · Cited by 74
Degradation of the mechanical properties of NbMoTaW refractory high-entropy alloy in tension
Kumar, P., Gou, X., Cook, D. H., Payne, M. I., Morrison, N., Wang, W., Zhang, M., Asta, M., Minor, A. M., Cao, R., et al. (2024) · Acta Materialia · doi:10.1016/j.actamat.2024.120297 · Cited by 82
Self-citationAcevedo, C., Bale, H., Gludovatz, B., Wat, A., Tang, S. Y., Wang, M., Busse, B., Zimmermann, E. A., Schaible, E. G., Allen, M. R., et al. (2015) · Bone · doi:10.1016/j.bone.2015.08.002 · Cited by 84
“Indeed, fracture resistance in general originates atmultiple length-scales; at nanoscale dimensions, intrinsic toughening mechanisms resist the initiation and growth of cracks primarily via plasticity acting ahead of a growing crack, whereas at microscale dimensions, extrinsic toughness mechanisms act to impede the cr…”
BackgroundSelf-citationStrong and Tough Layered Nanocomposites with Buried Interfaces
Chen, K., Tang, X., Yue, Y., Zhao, H., & Guo, L. (2016) · ACS Nano · doi:10.1021/acsnano.6b01752 · Cited by 74
“place by CMC, which is composed of β-(1-4)-linked glycanes, a water-soluble anionic”
BackgroundSun, X., Guo, Y., Wei, Q., Li, Y., & Zhang, S. (2016) · Materials Science and Engineering A · doi:10.1016/j.msea.2016.05.093 · Cited by 74
Liu, X., Li, J., Sha, J., Liu, E., Li, Q., He, C., Shi, C., & Zhao, N. (2017) · Materials Science and Engineering A · doi:10.1016/j.msea.2017.10.030 · Cited by 74
Processing Lignocellulose-Based Composites into an Ultrastrong Structural Material
Chen, Y., Dang, B., Jin, C., & Sun, Q. (2018) · ACS Nano · doi:10.1021/acsnano.8b06409 · Cited by 76
Schultz, R. A. (2019) · Cambridge University Press eBooks · doi:10.1017/9781316996737 · Cited by 74
Deka, N., Bera, A., Roy, D., & De, P. (2022) · ACS Omega · doi:10.1021/acsomega.2c04564 · Cited by 85
Xu, X., Kumar, P., Cao, R., Ye, Q., Chu, Y., Tian, Y., Li, Y., & Ritchie, R. O. (2024) · Acta Materialia · doi:10.1016/j.actamat.2024.120019 · Cited by 73
Self-citationSelf-toughening crystalline Cu/amorphous Cu–Zr nanolaminates: Deformation-induced devitrification
Zhang, J., Liu, G., & Sun, J. (2014) · Acta Materialia · doi:10.1016/j.actamat.2013.11.061 · Cited by 73
Singh, P. K., Smirnov, A. V., & Johnson, D. D. (2018) · Physical Review Materials · doi:10.1103/physrevmaterials.2.055004 · Cited by 73
Liu, X., Li, J., Liu, E., Li, Q., He, C., Shi, C., & Zhao, N. (2018) · Materials Science and Engineering A · doi:10.1016/j.msea.2018.01.065 · Cited by 73
Nature-Inspired Hierarchical Steels
Cao, S. C., Liu, J., Zhu, L., Li, L., Dao, M., Lü, J., & Ritchie, R. O. (2018) · Scientific Reports · doi:10.1038/s41598-018-23358-7 · Cited by 74
Self-citationTedeschi, G., Guzmán‐Puyol, S., Ceseracciu, L., Paul, U. C., Picone, P., Carlo, M. D., Athanassiou, A., & Heredia‐Guerrero, J. A. (2020) · Biomacromolecules · doi:10.1021/acs.biomac.9b01569 · Cited by 76
Shear avalanches in plastic deformation of a metallic glass composite
Tong, X., Wang, G., Yi, J., Ren, J., Pauly, S., Gao, Y., Zhai, Q., Mattern, N., Dahmen, K. A., Liaw, P. K., et al. (2015) · International Journal of Plasticity · doi:10.1016/j.ijplas.2015.10.006 · Cited by 72
Strength and toughness trade-off optimization of nacre-like ceramic composites
Radi, K., Jauffrès, D., Deville, S., & Martin, C. L. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.107699 · Cited by 73
“Extrinsic mechanisms influence only the crack growth [7,8].”
BackgroundMonn, M. A., Vijaykumar, K., Kochiyama, S., & Kesari, H. (2020) · Nature Communications · doi:10.1038/s41467-019-14128-8 · Cited by 72
Wan, H., Leung, N., Algharaibeh, S., Sui, T., Liu, Q., Peng, H., & Su, B. (2020) · Composites Part B Engineering · doi:10.1016/j.compositesb.2020.108414 · Cited by 76
Liu, X., Liu, Z., Liu, Y., Zafar, Z., Lu, Y., Wu, X. G., Jiang, Y., Xu, Z., Guo, Z., & Li, S. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.109552 · Cited by 73
Mechanical energy metamaterials in interstellar travel
Jiao, P. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101132 · Cited by 81
Shen, J., Li, C., van der Vegt, N. F. A., & Peter, C. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp402341w · Cited by 78
Crystal lattice tilting in prismatic calcite
Olson, I. C., Metzler, R. A., Tamura, N., Kunz, M., Killian, C. E., & Gilbert, P. U. P. A. (2013) · Journal of Structural Biology · doi:10.1016/j.jsb.2013.06.006 · Cited by 75
“, 2012) with the mechanical properties of the shells (Bruet et al., 2005; Kearney et al., 2006; Launey and Ritchie, 2009; Munch et al., 2008; Ritchie, 2011).”
BackgroundPeng, C., Gao, X., Wang, M., Wu, L., Tang, H., Li, X., Zhang, Q., Ren, Y., Zhang, F., Wang, Y., et al. (2019) · Applied Physics Letters · doi:10.1063/1.5054954 · Cited by 76
Wang, C.-C., Mao, Y., Shan, Z., Dao, M., Li, J., Sun, J., Ma, E., & Suresh, S. (2013) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1320235110 · Cited by 71
“Fourth, cyclic straining-induced crystalline phases near the fatigue crack tip, in conjunction with a plasticity-induced tension-compression fatigue load with displacement-controlled straining, would bridge the wakes of crack and thus extrinsically enhance the fatigue tolerance (38).”
BackgroundOh, J. Y., Kim, Y. S., Jung, Y., Yang, S. J., & Park, C. R. (2016) · ACS Nano · doi:10.1021/acsnano.5b06719 · Cited by 71
“Previous studies have revealed the key mechanistic principle of bone and the strengthening role of mineral hydroxyapatite.(30-33) The distinctive nanostructure based on electrostatic interactions and hydrogen bonding between plate-shaped hydroxyapatite nanocrystals and fiber-shaped collagen molecules provides unique l…”
BackgroundZhu, W., Lei, J. F., Su, B., & Sun, Q. (2020) · Materials Science and Engineering A · doi:10.1016/j.msea.2020.139248 · Cited by 71
Wang, J., Shen, Y. F., Xue, W. Y., Jia, N., & Misra, R. D. K. (2020) · Materials Science and Engineering A · doi:10.1016/j.msea.2020.140484 · Cited by 71
Zhang, Z., Fan, G., Tan, Z., Zhao, H., Xu, Y., Xiong, D., & Li, Z. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.109251 · Cited by 71
Cai, C., Meng, X., Zhang, L., Luo, B., Liu, Y., Liu, T., Zhang, S., Wang, J., Chi, M., Gao, C., et al. (2024) · Nano Letters · doi:10.1021/acs.nanolett.4c00918 · Cited by 72
Milovanovic, P. D., Rakočević, Z. L., Djonić, D., Živković, V., Hahn, M. P., Nikolić, S., Amling, M., Busse, B., & Djuric, M. P. (2014) · Experimental Gerontology · doi:10.1016/j.exger.2014.03.001 · Cited by 80
“bonemechanical properties domutually compete, so that any structural and compositional alteration may result in mechanical imbalances (Currey, 2003, 2004; Ritchie, 2011).”
Zhai, H., Wang, H., & Liu, F. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.05.290 · Cited by 71
Teng, C., Qiao, J., Wang, J., Jiang, L., & Zhu, Y. (2015) · ACS Nano · doi:10.1021/acsnano.5b05120 · Cited by 73
Li, H. F., Duan, Q. Q., Zhang, P., Zhou, X. H., Wang, B., & Zhang, Z. F. (2019) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2019.03.003 · Cited by 70
Bae, J. W., Lee, J., Zargaran, A., & Kim, H. S. (2020) · Scripta Materialia · doi:10.1016/j.scriptamat.2020.113653 · Cited by 70
Stockhausen, K. E., Qwamizadeh, M., Wölfel, E. M., Hemmatian, H., Fiedler, I. A. K., Flenner, S., Longo, E., Amling, M., Greving, I., Ritchie, R. O., et al. (2021) · ACS Nano · doi:10.1021/acsnano.0c04786 · Cited by 74
Self-citationFlexible Cages Enable Robust Supramolecular Elastomers
Xu, J., Shao, M., Wang, X., Chen, T., Song, L., Zhang, X., Wang, T., Zhang, Y., Yang, Z., & Wang, Q. (2024) · Advanced Materials · doi:10.1002/adma.202311992 · Cited by 71
Ban, Y., Huang, L., Li, Z., Li, Y., Zhang, Y., & Pan, J. (2024) · International Journal of Plasticity · doi:10.1016/j.ijplas.2024.104147 · Cited by 70
Luczynski, K. W., Steiger-Thirsfeld, A., Bernardi, J., Eberhardsteiner, J., & Hellmich, C. (2015) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2015.03.001 · Cited by 70
Design for Fe-high Mn alloy with an improved combination of strength and ductility
Lee, S.-J., Han, J., Lee, S. J., Kang, S. H., Lee, S., & Lee, Y. (2017) · Scientific Reports · doi:10.1038/s41598-017-03862-y · Cited by 70
“ρ σ = ∆ + ∆ + + ∆ + γ ε γ ε − → → ( ) G G E G SFE (mJ m ) 2 2 (5) ch mag st AGS 2”
Sakakibara, K., Moriki, Y., Yano, H., & Tsujii, Y. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b13963 · Cited by 75
Yin, W., Briffod, F., Shiraiwa, T., & Enoki, M. (2022) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2022.02.004 · Cited by 69
Sustainable valorization of asphaltenes via flash joule heating
Saadi, M. A. S. R., Advincula, P. A., Thakur, M. S. H., Khater, A. Z., Saad, S., Zeraati, A. S., Nabil, S. K., Zinke, A., Roy, S., Lou, M., et al. (2022) · Science Advances · doi:10.1126/sciadv.add3555 · Cited by 77
“3C) shows high roughness, suggesting large numbers of shear band formations and crack deflections throughout the sample ( 33 ).”
Bio-inspired non self-similar hierarchical elastic metamaterials
Mazzotti, M., Foehr, A., Bilal, O. R., Bergamini, A., Bosia, F., Daraio, C., Pugno, N. M., & Miniaci, M. (2022) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2022.107915 · Cited by 73
Chung, D., Lee, J., He, Q., Kim, Y., Lim, K. R., Kim, H. S., Yang, Y. G., & Na, Y. (2022) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2022.10.036 · Cited by 69
Zhang, P., Zhang, G., Pan, J., Ma, C., & Zhang, G. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c22433 · Cited by 69
Mechanical tailoring of dislocations in ceramics at room temperature: A perspective
Fang, X. (2023) · Journal of the American Ceramic Society · doi:10.1111/jace.19362 · Cited by 69
“28 Yet, dislocations with high density (up to ∼ 10 13 /m 2 and higher) are often required to significantly improve functionality.”
Strong and Tough Biofibers Designed by Dual Crosslinking for Sutures
Xiao, Y., Yang, Z. R., Guo, B., Wu, B., Liu, R., Zhang, S., Zhao, P., Ruan, J., Lu, X., Liu, K., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202313131 · Cited by 69
Toughening of ceramics and ceramic composites through microstructure engineering: A review
Gavalda‐Diaz, O., Saiz, E., Chevalier, J., & Bouville, F. (2025) · International Materials Reviews · doi:10.1177/09506608241308337 · Cited by 69
Multiscale structure and damage tolerance of coconut shells
Gludovatz, B., Walsh, F., Zimmermann, E. A., Naleway, S. E., Ritchie, R. O., & Kruzic, J. J. (2017) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2017.05.024 · Cited by 71
“), is accomplished through aforementioned multiscale hierarchical architectures providing both intrinsic and extrinsic fracture resistance mechanisms (Ritchie, 2011; Zimmermann et al., 2015).”
BackgroundInfluentialSelf-citationLessons from the Ocean: Whale Baleen Fracture Resistance
Wang, B., Sullivan, T. N., Pissarenko, A., Zaheri, A., Espinosa, H. D., & Meyers, M. A. (2018) · Advanced Materials · doi:10.1002/adma.201804574 · Cited by 69
Ke, X., Shan, Z., Li, Z., Tao, Y., Yue, Y., & Tao, H. (2020) · Journal of the American Ceramic Society · doi:10.1111/jace.17048 · Cited by 68
Bond Switching in Densified Oxide Glass Enables Record-High Fracture Toughness
To, T., Sørensen, S. S., Christensen, J. F. S., Christensen, R., Jensen, L. R., Boćkowski, M., Bauchy, M., & Smedskjær, M. M. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c00435 · Cited by 68
Research progress on selective laser melting (SLM) of bulk metallic glasses (BMGs): a review
Zhang, P., Tan, J., Tian, Y., Yan, H., & Yu, Z. (2021) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-021-07990-8 · Cited by 68
Computational discovery of microstructured composites with optimal stiffness-toughness trade-offs
Li, B., Deng, B., Shou, W., Oh, T.-H., Hu, Y., Luo, Y., Shi, L., & Matusik, W. (2024) · Science Advances · doi:10.1126/sciadv.adk4284 · Cited by 72
Bone tissue aging affects mineralization of cement lines
Milovanovic, P. D., Scheidt, A. V., Mletzko, K., Sarau, G., Püschel, K., Djuric, M. P., Amling, M., Christiansen, S. H., & Busse, B. (2018) · Bone · doi:10.1016/j.bone.2018.02.004 · Cited by 73
Bakhit, B., Engberg, D. L. J., Lu, J., Rosén, J., Högberg, H., Hultman, L., Petrov, I., Greene, J. E., & Greczyński, G. (2019) · Journal of Vacuum Science & Technology A Vacuum Surfaces and Films · doi:10.1116/1.5093170 · Cited by 68
Strength-induced peridynamic modeling and simulation of fractures in brittle materials
Wang, Y., Han, F., & Gilles Lubineau, A. (2020) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2020.113558 · Cited by 67
Toughening cemented carbides by phase transformation of zirconia
Jiang, W., Lü, H., Chen, J., Liu, X., Liu, C., & Song, X. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.109559 · Cited by 67
Micheletti, C., Hurley, A. L., Gourrier, A., Palmquist, A., Tang, T., Shah, F. A., & Grandfield, K. (2022) · Acta Biomaterialia · doi:10.1016/j.actbio.2022.02.024 · Cited by 71
Bioinspired Robust Mechanical Properties for Advanced Materials
Wijerathne, B., Liao, T., Ostrikov, K., & Sun, Z. (2022) · Small Structures · doi:10.1002/sstr.202100228 · Cited by 71
Design metastability in high-entropy alloys by tailoring unstable fault energies
Wang, X., Vecchis, R. R. D., Li, C., Zhang, H., Hu, X., Sridar, S., Wang, Y., Chen, W., & Xiong, W. (2022) · Science Advances · doi:10.1126/sciadv.abo7333 · Cited by 72
“Column (1) is the phase map, and column (2) is the inverse pole figure (IPF) map of the homogenized samples.”
BackgroundInfluentialEmerging Sustainable Structural Materials by Assembling Cellulose Nanofibers
Yang, H., Yue, X., Liu, Z., Guan, Q., & Yu, S. (2024) · Advanced Materials · doi:10.1002/adma.202413564 · Cited by 92
Li, Y., Umer, R., Isakovic, A. F., Samad, Y. A., Zheng, L., & Liao, K. (2013) · RSC Advances · doi:10.1039/c3ra22300k · Cited by 67
de Obaldia, E. E., Jeong, C., Grunenfelder, L. K., Kisailus, D., & Zavattieri, P. D. (2015) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2015.03.026 · Cited by 76
Liu, Z., Jiao, D., Weng, Z. Y., & Zhang, Z. F. (2015) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2015.11.013 · Cited by 67
Deformation mechanisms in nanotwinned copper by molecular dynamics simulation
Zhao, X., Lü, C., Tieu, A. K., Pei, L., Zhang, L., Su, L., & Zhan, L. (2016) · Materials Science and Engineering A · doi:10.1016/j.msea.2016.12.061 · Cited by 67
Salvador, C. A. F., Maia, E. L., da Costa, F. H., Escobar, J., & Oliveira, J. P. (2022) · Scientific Data · doi:10.1038/s41597-022-01283-9 · Cited by 72
Metadata
- Authors
- Ritchie, R. O.
- Affiliations
- Lawrence Berkeley National Laboratory (US)
- Corresponding author
- Ritchie, Robert O.
- ORCID
- Ritchie, Robert O.
- Venue
- Nature Materials
- Published
- 2011-10-24
- Volume
- 10
- Issue
- 11
- Pages
- 817-822
- ISSN
- 1476-1122 (ISSN-L)
- 1476-4660
- OpenAlex
- W1971974144
- Cited by
- 3,989
- References
- 27
- Citations by year
- 2026: 458 · 2025: 556 · 2024: 474 · 2023: 385 · 2022: 398 · 2021: 332 · 2020: 280 · 2019: 259 · 2018: 242 · 2017: 172 · 2016: 140 · 2015: 120 · 2014: 81 · 2013: 62 · 2012: 30
- FWCI
- 27.12
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- www.springer.com/tdm (vor)
- Locations
- Nature Materials (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Metals and Alloys › Microstructure and mechanical properties
- Physical Sciences › Materials Science › Biomaterials › Calcium Carbonate Crystallization and Inhibition
- Physical Sciences › Materials Science › Metals and Alloys › Metallic Glasses and Amorphous Alloys
- Keywords
- strength-toughness trade-off, damage tolerance, fracture resistance, amorphous alloys, biological materials, advanced ceramics, ductility
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.