The conflicts between strength and toughness
The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Abstract
The attainment of both strength and toughness is a vital requirement for most structural materials; unfortunately these properties are generally mutually exclusive. Although the quest continues for stronger and harder materials, these have little to no use as bulk structural materials without appropriate fracture resistance. It is the lower-strength, and hence higher-toughness, materials that find use for most safety-critical applications where premature or, worse still, catastrophic fracture is unacceptable. For these reasons, the development of strong and tough (damage-tolerant) materials has traditionally been an exercise in compromise between hardness versus ductility. Drawing examples from metallic glasses, natural and biological materials, and structural and biomimetic ceramics, we examine some of the newer strategies in dealing with this conflict. Specifically, we focus on the interplay between the mechanisms that individually contribute to strength and toughness, noting that these phenomena can originate from very different lengthscales in a material's structural architecture. We show how these new and natural materials can defeat the conflict of strength versus toughness and achieve unprecedented levels of damage tolerance within their respective material classes.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Cavitation that frequently observed during stretching was also suppressed due to side constraints according to Ref [27].”
From Simultaneously Toughening and Strengthening of PLA-b-PCL Copolymer via Pressure-induced-flow Processing at Room Temperature (2018) · cites this paper as [27]
In the citing paper
“Polyesterbased TPEs are attractive because of their degradability and synthetic versatility, 5-10 yet they suffer from a fundamental trade-off: enhancing tensile strength often reduces elasticity, while improving stretchability typically compromises strength.11,12”
From Metal-Free Synthesis of Tough PLLA- b -PCVL- b -PLLA Triblock Polyester Thermoplastic Elastomers from Mixed Monomers (2026) · cites this paper as [11]
Citations
Cites
THE MATERIAL BONE: Structure-Mechanical Function Relations
Weiner, S., & Wagner, H. D. (1998) · Annual Review of Materials Science · doi:10.1146/annurev.matsci.28.1.271 · Cited by 2,724
Nabarro, F. R. N., Duesbery, M. S., Hirth, J. P., & Kubin, L. P. (1979) · Cited by 2,675
Freezing as a Path to Build Complex Composites
Deville, S., Saiz, E., Nalla, R. K., & Tomsia, A. P. (2006) · Science · doi:10.1126/science.1120937 · Cited by 1,900
Tough, Bio-Inspired Hybrid Materials
Munch, E., Launey, M. E., Alsem, D. H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2008) · Science · doi:10.1126/science.1164865 · Cited by 1,822 · cited 1×
“Recently, synthetic, yet bioinspired, bulk ceramic materials have been made in the image of the nacre structur”
BackgroundSelf-citationPerspective on the Development of High‐Toughness Ceramics
Evans, A. G. (1990) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1990.tb06493.x · Cited by 1,625 · cited 1×
“A prime example of this is in brittle materials such as ceramics, which invariably cannot be toughened by promoting plasticit”
BackgroundDesigning metallic glass matrix composites with high toughness and tensile ductility
Hofmann, D. C., Suh, J.-Y., Wiest, A., Duan, G., Lind, M.-L., Demetriou, M. D., & Johnson, W. L. (2008) · Nature · doi:10.1038/nature06598 · Cited by 1,501
On the Fracture Toughness of Advanced Materials
Launey, M. E., & Ritchie, R. O. (2009) · Advanced Materials · doi:10.1002/adma.200803322 · Cited by 967
Self-citationRitchie, R. O. (1988) · Materials Science and Engineering: A · doi:10.1016/0025-5416(88)90547-2 · Cited by 874
Self-citationDeformation mechanisms in nacre
Wang, R. Z., Suo, Z., Evans, A. G., Yao, N., & Aksay, I. A. (2001) · Journal of Materials Research · doi:10.1557/jmr.2001.0340 · Cited by 835 · cited 1×
“, the frictional motion between mineral platelets in seashell”
BackgroundOn the Mechanistic Origins of Toughness in Bone
Launey, M. E., Buehler, M. J., & Ritchie, R. O. (2010) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070909-104427 · Cited by 741 · cited 1×
“The origin of the intrinsic (plastic deformation) mechanisms tends to be on the smaller, submicrometre lengthscales, akin to the nanometre scale of dislocation Burgers' vectors in metals, whereas the processes of extrinsic toughening and fracture occur on much coarser lengthscales typically well into the micrometre ra…”
BackgroundSelf-citation
Research works printed but not linked: 1
- Sarikaya, M. & Aksay, I. A. in Results and Problems in Cell Differentiation Vol. 19 (ed. Case, S.) Ch. 1 (Springer, 1992).
Cited by
Items 601–700 of 1,006
3D Interrelationship between Osteocyte Network and Forming Mineral during Human Bone Remodeling
Ayoubi, M., van Tol, A. F., Weinkamer, R., Roschger, P., Brugger, P. C., Berzlanovich, A. M., Bertinetti, L., Roschger, A., & Fratzl, P. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202100113 · Cited by 68
Extra plasticity governed by shear band deflection in gradient metallic glasses
Tang, Y., Zhou, H., Lu, H., Wang, X. D., Cao, Q. P., Zhang, D., Yang, W. M., & Jiang, J. Z. (2022) · Nature Communications · doi:10.1038/s41467-022-29821-4 · Cited by 66
Lee, D.-H., Lee, G. M., & Park, S. H. (2022) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2022.05.015 · Cited by 67
Mirkhalaf, M., Tanguay, J., & Barthelat, F. (2016) · Extreme Mechanics Letters · doi:10.1016/j.eml.2016.02.016 · Cited by 66
“Despite large efforts in material development and mechanics, some combinations of mechanical properties remain inaccessible to engineering materials [1,2].”
BackgroundCanal, L. P., Alfano, M., & Botsis, J. (2016) · Composites Science and Technology · doi:10.1016/j.compscitech.2016.11.027 · Cited by 66
An additively manufactured AlCuMnZr alloy microstructure and tensile mechanical properties
Shyam, A., Plotkowski, A., Bahl, S., Sisco, K. D., Allard, L. F., Yang, Y., Haynes, J. A., & Dehoff, R. (2020) · Materialia · doi:10.1016/j.mtla.2020.100758 · Cited by 66
A Natural 3D Interconnected Laminated Composite with Enhanced Damage Resistance
Li, L., & Christine Ortiz, B. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201500380 · Cited by 66
Jin, L., Zhang, M., Shang, L., Liu, L. L., Li, M., & Ao, Y. (2020) · Composites Science and Technology · doi:10.1016/j.compscitech.2020.108382 · Cited by 66
Design of high strength and wear-resistance β-Ti alloy via oxygen-charging
Wang, X.-Q., Zhang, Y., & Han, W. (2022) · Acta Materialia · doi:10.1016/j.actamat.2022.117686 · Cited by 65
Hu, F., Zeng, J., Li, J., Wang, B., Cheng, Z., Wang, T., & Chen, K. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c01597 · Cited by 65
A ductility metric for refractory-based multi-principal-element alloys
Singh, P. K., Vela, B., Ouyang, G., Argibay, N., Cui, J., Arróyave, R., & Johnson, D. D. (2023) · Acta Materialia · doi:10.1016/j.actamat.2023.119104 · Cited by 69
“systems have been developed to enhance high-temperature phase stability, expanding the design prospects for new alloys [3-22].”
BackgroundKoch, S. L., Morgan, B. J., Passerini, S., & Teobaldi, G. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.07.027 · Cited by 65
“Recent research in damage tolerant natural and synthetic materials indicates that hierarchical multiscale (nm to cm) structuring (extrinsic toughening [34]) of composite materials can be crucial for crack suppression [34,35].”
BackgroundInfluentialJiao, D., Liu, Z., Zhang, Z., & Zhang, Z. (2015) · Scientific Reports · doi:10.1038/srep12418 · Cited by 68
Yu, B., Geng, C., Zhou, M., Bai, H., Fu, Q., & He, B. (2016) · Composites Part B Engineering · doi:10.1016/j.compositesb.2016.02.040 · Cited by 65
Stress Reduction of 3D Printed Compliance‐Tailored Multilayers
Kumar, S., Wardle, B. L., Arif, M. F., & Ubaid, J. (2017) · Advanced Engineering Materials · doi:10.1002/adem.201700883 · Cited by 66
Han, D., Guan, X., Yan, Y. C., Shi, F., & Li, X. (2018) · Materials Science and Engineering A · doi:10.1016/j.msea.2018.11.103 · Cited by 65
Gao, Y., Kuang, J., Liu, G., & Sun, J. (2018) · Materials Science and Engineering A · doi:10.1016/j.msea.2018.12.099 · Cited by 65
Mei, A. B., Kindlund, H., Broitman, E., Hultman, L., Petrov, I., Greene, J. E., & Sangiovanni, D. G. (2020) · Acta Materialia · doi:10.1016/j.actamat.2020.03.037 · Cited by 65
“accepted assumption that excellent ductility and high strength (well-correlated to hardness in solids [10, 11]) are mutually-exclusive material properties [12, 13].”
BackgroundLin, J., Wang, L., Liu, L., Lu, K., Li, G., & Yang, X. (2020) · Composites Science and Technology · doi:10.1016/j.compscitech.2020.108114 · Cited by 65
Multi-objective topology optimization and structural analysis of periodic spaceframe structures
Lim, J., You, C., & Dayyani, I. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.108552 · Cited by 68
“Some mechanical metamaterials with ultra-property behaviour have simultaneously two or more conflicting properties, for example: high stiffness, high toughness and low mass density [4,5].”
BackgroundZhang, J., & Han, W. (2020) · Acta Materialia · doi:10.1016/j.actamat.2020.06.023 · Cited by 64
Xiang, H., & Guo, W. (2021) · International Journal of Plasticity · doi:10.1016/j.ijplas.2021.103197 · Cited by 64
Examining the Effect of the Aging State on Strength and Plasticity of Wrought Aluminum Alloys
Qu, Z., Zhang, Z. J., Yan, J. X., Zhang, P., Gong, B. S., Lu, S., Zhang, Z. F., & Langdon, T. G. (2021) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2021.11.075 · Cited by 64
Bioinspired Strategies for Excellent Mechanical Properties of Composites
Peng, X., Zhang, B., Wang, Z., Su, W., Niu, S., Han, Z., & Ren, L. (2022) · Journal of Bionic Engineering · doi:10.1007/s42235-022-00199-9 · Cited by 69
“However, certain properties of structural materials are mutually exclusive, such as the contradiction between strength and toughness [1].”
BackgroundFatigue cracking criterion of high-strength steels induced by inclusions under high-cycle fatigue
Wang, P., Zhang, P., Wang, B., Zhu, Y., Xu, Z., & Zhang, Z. (2023) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2023.02.006 · Cited by 64
Mesostructure engineering in additive manufacturing of alloys
Wei, S., Hutchinson, C. R., & Ramamurty, U. (2023) · Scripta Materialia · doi:10.1016/j.scriptamat.2023.115429 · Cited by 64
Turning brittleness into toughness
Studart, A. R. (2014) · Nature Materials · doi:10.1038/nmat3955 · Cited by 68
Hohenwarter, A., Völker, B., Kapp, M. W., Li, Y., Goto, S., Raabe, D., & Pıppan, R. (2016) · Scientific Reports · doi:10.1038/srep33228 · Cited by 64
Mao, G., Cayron, C., Cao, R., Logé, R. E., & Chen, J. (2018) · Materials Characterization · doi:10.1016/j.matchar.2018.09.012 · Cited by 64
Nacre-Mimetic Graphene Oxide/Cross-Linking Agent Composite Films with Superior Mechanical Properties
Woo, J. Y., Oh, J. H., Jo, S., & Han, C. (2019) · ACS Nano · doi:10.1021/acsnano.9b00158 · Cited by 66
Strength and toughness enhancement in 3d printing via bioinspired tool path
Sun, Y., Tian, W., Zhang, T., Chen, P., & Li, M. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108239 · Cited by 67
Bone adaptation: Safety factors and load predictability in shaping skeletal form
Willie, B. M., Zimmermann, E. A., Vitienes, I., Main, R. P., & Komarova, S. V. (2019) · Bone · doi:10.1016/j.bone.2019.115114 · Cited by 75
Porter, M. M., & Niksiar, P. (2018) · PLoS ONE · doi:10.1371/journal.pone.0204309 · Cited by 67
Fracture toughness analysis of helical fiber-reinforced biocomposites
Gao, Y., Li, B., Wang, J., & Feng, X. (2020) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2020.104206 · Cited by 63
Tian, Y., Wu, J., Fang, X., Guan, L., Yao, N., Yang, G., Wang, Z., Hua, Z., & Liu, G. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202112741 · Cited by 64
The dual role of martensitic transformation in fatigue crack growth
Wang, X., Liu, C., Sun, B., Ponge, D., Jiang, C., & Raabe, D. (2022) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2110139119 · Cited by 63
“For instance, the use of the transformation-induced plasticity (TRIP) effect (3, 4) to overcome the strength–ductility trade-off (5) has enabled many high-performance alloys, such as advanced steels (6, 7), titanium alloys (8), and high-entropy alloys (9).”
BackgroundMechanical properties of ceramics reinforced with allotropic forms of carbon
Morales‐Flórez, V., & Domínguez-Rodríguez, A. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.100966 · Cited by 65
Wang, Z., Lin, X., Wang, J., Kang, N., Hu, Y., Wang, D., Li, H., Huang, W., & Pan, F. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.103093 · Cited by 63
Duan, X., & Yang, X. (2023) · Materials Science and Engineering A · doi:10.1016/j.msea.2023.144711 · Cited by 63
High-strength and ultra-tough whole spider silk fibers spun from transgenic silkworms
Mi, J., Zhou, Y., Ma, S., Zhou, X., Xu, S., Yang, Y.-C., Sun, Y., Xia, Q.-Y., Zhu, H.-N., Wang, S., et al. (2023) · Matter · doi:10.1016/j.matt.2023.08.013 · Cited by 59
The importance of fracture toughness evaluation for additively manufactured metals
Paul, M. J., Kruzic, J. J., Ramamurty, U., & Gludovatz, B. (2024) · Acta Materialia · doi:10.1016/j.actamat.2024.120061 · Cited by 63
Xie, H., Bao, F., Zhang, H., Zhao, C., Shi, L., Cui, J., Li, X., Pan, Y. M., Zhu, C., Ding, X., et al. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202408411 · Cited by 67
Recovery of strain-hardening rate in Ni-Si alloys
Yang, C. L., Zhang, Z. J., Cai, T., Zhang, P., & Zhang, Z. F. (2015) · Scientific Reports · doi:10.1038/srep15532 · Cited by 63
“Thus, this gives rise to two open questions: (1) whether the polycrystalline metals with only dislocation slip mechanism may possess RSHR effect? and (2) what is the general mechanism for the RSHR? As the decrease of Θ during deformation is mainly driven by the annihilation of screw dislocations at room temperate, whi…”
BackgroundMolecular Engineering of Elastic and Strong Supertough Polyurethanes
Fernández–d’Arlas, B., Ramos, J. Á., Saralegi, A., Corcuera, M. Á., Mondragòn, I., & Eceiza, A. (2012) · Macromolecules · doi:10.1021/ma300397e · Cited by 63
Ultrastrong Graphene-Based Fibers with Increased Elongation
Li, M., Zhang, X., Wang, X., Ru, Y., & Qiao, J. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b03108 · Cited by 63
Thermoset Blends of an Epoxy Resin and Polydicyclopentadiene
Rohde, B. J., Le, K. M., Krishnamoorti, R., & Robertson, M. L. (2016) · Macromolecules · doi:10.1021/acs.macromol.6b01649 · Cited by 65
Microstructure evolution and fracture behavior of innovative Ti-(SiCf/Al3Ti) laminated composites
Lin, C., Jiang, F., Han, Y., Wang, E., Yuan, D. S., & Guo, C. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.01.392 · Cited by 63
Bending Flexibility of Moso Bamboo (Phyllostachys Edulis) with Functionally Graded Structure
Wei, X., Zhou, H., Chen, F., & Wang, G. (2019) · Materials · doi:10.3390/ma12122007 · Cited by 62
“At the same time, the model could also provide theoretical guidance for the study of mechanical properties of natural FG materials [22] (including bamboo, bones and shells, etc.”
BackgroundMethodMechanical properties of additively manufactured variable lattice structures of Ti6Al4V
Traxel, K. D., Groden, C., Valladares, J., & Bandyopadhyay, A. K. (2021) · Materials Science and Engineering A · doi:10.1016/j.msea.2021.140925 · Cited by 68
Strengthening and toughening epoxy polymer at cryogenic temperature using cupric oxide nanorods
Chang, W., Rose, L. R. F., Islam, M. S., Wu, S., Peng, S., Huang, F., Kinloch, A. J., & Wang, C. (2021) · Composites Science and Technology · doi:10.1016/j.compscitech.2021.108762 · Cited by 62
Toughening of Bioceramic Composites for Bone Regeneration
Abbas, Z., Dapporto, M., Tampieri, A., & Sprio, S. (2021) · Journal of Composites Science · doi:10.3390/jcs5100259 · Cited by 71
Ceramic Toughening Strategies for Biomedical Applications
Bai, R., Sun, Q., He, Y., Peng, L., Zhang, Y., Zhang, L., Lu, W., Deng, J., Zhuang, Z., Yu, T., et al. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.840372 · Cited by 66
“These new materials show that bioinspired techniques can be used to achieve both strength and toughness, which are normally mutually exclusive qualities (Ritchie, 2011).”
BackgroundJi, W., & Wu, M. S. (2021) · Acta Materialia · doi:10.1016/j.actamat.2022.117639 · Cited by 63
Nanofiber Composite Reinforced Organohydrogels for Multifunctional and Wearable Electronics
Wen, J., Wu, Y., Gao, Y., Su, Q., Liu, Y.-T., Wu, H., Zhang, H., Liu, Z., Yao, H., Huang, X., et al. (2023) · Nano-Micro Letters · doi:10.1007/s40820-023-01148-9 · Cited by 66
“Hence, the nanofibers in the membrane layer and the nanofi-brils in the gel layers can enhance the fracture toughness of the composite organohydrogel by combination of the fiber pulling out and bridging mechanism [41].”
BackgroundTailoring Ti3AlC2 ceramic with high anisotropic physical and mechanical properties
Zhang, H. B., Hu, C., Sato, K., Grasso, S., Estili, M., Guo, S., Morita, K., Yoshida, H., Nishimura, T., Suzuki, T., et al. (2014) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2014.08.026 · Cited by 62
An improved failure criterion for biological and engineered staggered composites
Barthelat, F., Dastjerdi, A. K., & Rabiei, R. (2012) · Journal of The Royal Society Interface · doi:10.1098/rsif.2012.0849 · Cited by 69
Torsional properties of helix-reinforced composites fabricated by magnetic freeze casting
Porter, M. M., Meraz, L., Calderon, A., Choi, H., Chouhan, A., Wang, L. Z., Meyers, M. A., & McKittrick, J. M. (2014) · Composite Structures · doi:10.1016/j.compstruct.2014.08.033 · Cited by 65
“This type of crack deflection is commonly observed in a variety of natural materials, such as bone and nacre [41], leading to enhanced strength and toughness.”
BackgroundToughening Mechanisms in Nanolayered MAX Phase Ceramics—A Review
Chen, X., & Bei, G. (2017) · Materials · doi:10.3390/ma10040366 · Cited by 62
“Schematic illustrating both intrinsic and extrinsic mechanisms of toughening mechanisms associated with crack extension [13].”
BackgroundInfluentialHidalgo-Manrique, P., Yan, S., Lin, F., Hong, Q., Kinloch, I. A., Chen, X., Young, R. J., Zhang, X., & Dai, S. (2017) · Journal of Materials Science · doi:10.1007/s10853-017-1450-6 · Cited by 62
“Aluminium matrix composites (AMCs) typically exhibit improved specific strength and stiffness compared to the Al metal matrices due to reinforcement from non-metallic phases [6–8].”
BackgroundInfluentialEffect of interlamellar spacing on fracture toughness of nano-structured pearlite
Mishra, K., & Singh, A. (2017) · Materials Science and Engineering A · doi:10.1016/j.msea.2017.08.115 · Cited by 62
Chen, K., Tian, Q., Tian, C., Yan, G., Cao, F., Liang, S., & Wang, X. (2017) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.7b03218 · Cited by 62
Wang, Y., Yuan, L., Zhang, S., Sun, C., Wang, W., Yang, G., Li, Q., & Wei, Y. (2019) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2019.01.037 · Cited by 62
Phase transformation assisted twinning in a face-centered-cubic FeCrNiCoAl0.36 high entropy alloy
Yu, P., Feng, R., Du, J.-P., Shinzato, S., Chou, J., Chen, B., Lo, Y., Liaw, P. K., Ogata, S., & Hu, A. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.10.012 · Cited by 62
Linear and nonlinear rheological behavior of fat crystal networks
Macias‐Rodriguez, B. A., & Marangoni, A. G. (2017) · Critical Reviews in Food Science and Nutrition · doi:10.1080/10408398.2017.1325835 · Cited by 65
“These explanations seem plausible, as similar findings have been reported for biological and biologicallike materials with similar constituents and volume fractions (Ritchie, 2011; Sen and Buehler, 2011).”
ResultLee, W., Kim, J.-H., Kim, T., Kim, S., Lee, C., Kim, J.-S., Ahn, H., Kim, T., & Kim, B. J. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta11382j · Cited by 62
Ren, P. F., Chen, X. P., Wang, C. Y., Zhou, Y. X., Cao, W. Q., & Liu, Q. (2021) · Materials Characterization · doi:10.1016/j.matchar.2021.111013 · Cited by 61
Observation of cavitation governing fracture in glasses
Shen, L., Yu, J., Tang, X. C., Sun, B., Liu, Y., Bai, H. Y., & Wang, W. (2021) · Science Advances · doi:10.1126/sciadv.abf7293 · Cited by 61
“This means that the degree of plastic flow during the cavitation process depends on the intrinsic toughness of glasses, implying that the inherent fracture resistance is associated with the intrinsic plasticity (22, 41), even for brittle glasses with rather limited damage tolerance.”
BackgroundStructural Mechanisms in Soft Fibrous Tissues: A Review
Sharabi, M. (2022) · Frontiers in Materials · doi:10.3389/fmats.2021.793647 · Cited by 78
“The structural hierarchy in collagen fibers, explicitly, its subdivision into fibrils and micro-fibrils significantly increases its toughness and lessens the risk of crack propagation across multiple fibrils (Launey et al., 2010; Ritchie, 2011; Schriefl et al., 2012; Yang et al., 2019).”
BackgroundRational Design of Durable Anti-fouling Coatings with High Transparency, Hardness, and Flexibility
Gao, P., Wang, Y., Wang, J., Wang, F., Ma, W., Zhang, Z., Men, X., & Lu, Y. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c04279 · Cited by 61
Materials science-based guidelines to develop robust hard thin film materials
Mayrhofer, P. H., Clemens, H., & Fischer, F. D. (2024) · Progress in Materials Science · doi:10.1016/j.pmatsci.2024.101323 · Cited by 61
Clinical challenges in bone tissue engineering - A narrative review
Hoveidaei, A. H., Sadat‐Shojai, M., Nabavizadeh, S. S., Niakan, R., Shirinezhad, A., Mosalamiaghili, S., & Tabaie, S. A. (2024) · Bone · doi:10.1016/j.bone.2024.117363 · Cited by 68
“However, toughness and strength are often mutually exclusive (251): materials with higher strength tend to be brittle, while tougher materials are generally more susceptible to deformation.”
Tough and strong bioinspired high-entropy all-ceramics with a contiguous network structure
Zhu, Z., Liu, Y., Qin, Y., Gu, F., Zhuang, L., Yu, H., & Chu, Y. (2025) · Nature Communications · doi:10.1038/s41467-025-59914-9 · Cited by 79
Wu, C., Na, X., Ma, W., Ren, C., Zhong, Q., Wang, T., & Du, M. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.128724 · Cited by 62
Macro-micro-nano multistage toughening in nano-laminated graphene ceramic composites
Sun, J., Zhao, J., Chen, Y., Wang, L., Yun, X., & Huang, Z. (2021) · Materials Today Physics · doi:10.1016/j.mtphys.2021.100595 · Cited by 60
Sun, X., Jiang, F., Yuan, D. S., Wang, G., Tong, Y. X., & Wang, J. (2022) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2022.164075 · Cited by 60
A Flexible and Electrically Conductive Liquid Metal Adhesive for Hybrid Electronic Integration
Pozarycki, T. A., Zu, W., Wilcox, B. T., & Bartlett, M. D. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202313567 · Cited by 68
Hu, F., Gong, N., Zeng, J., Li, P., Wang, T., Li, J., Wang, B., & Chen, K. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202405016 · Cited by 60
Gu, Y., Wu, W., Zhang, C., Li, X., Guo, X., Wang, Y., Yuan, Y., Jiang, B., & Jin, Y. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202417206 · Cited by 60
Lignocellulosic Films: Preparation, Properties, and Applications
Du, H., Liu, K., Xu, T., Xu, C., Lin, M., Fang, Z., Kim, S., Seo, J., Chen, J., Ma, H., et al. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.5c00267 · Cited by 73
Hagenau, A., Suhre, M. H., & Scheibel, T. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.02.007 · Cited by 67
Spark Plasma Sintering as an Approach to Manufacture Bulk Materials: Feasibility and Cost Savings
Kelly, J., & Graeve, O. A. (2014) · JOM · doi:10.1007/s11837-014-1202-x · Cited by 60
Unique microstructural design of ceramic scaffolds for bone regeneration under load
Roohani‐Esfahani, S., Dunstan, C. R., Li, J. J., Lu, Z., Davies, B., PEARCE, S. G., Field, J., Williams, R., & Zreiqat, H. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.02.039 · Cited by 61
Sheng, L., Wei, T., Liang, Y., Jiang, L., Qu, L., & Fan, Z. (2017) · Carbon · doi:10.1016/j.carbon.2017.05.033 · Cited by 60
Amplifying Strength, Toughness, and Auxeticity via Wavy Sutural Tessellation in Plant Seedcoats
Gao, C., Hasseldine, B. P. J., Li, L., Weaver, J. C., & Li, Y. (2018) · Advanced Materials · doi:10.1002/adma.201800579 · Cited by 61
3D Printed Tubulanes as Lightweight Hypervelocity Impact Resistant Structures
Sajadi, S. M., Woellner, C. F., Ramesh, P., Eichmann, S. L., Sun, Q., Boul, P. J., Thaemlitz, C. J., Rahman, M. M., Baughman, R. H., Galvao, D. S., et al. (2019) · Small · doi:10.1002/smll.201904747 · Cited by 67
Transparent Nacre‐like Composites Toughened through Mineral Bridges
Magrini, T., Moser, S., Fellner, M., Lauria, A., Bouville, F., & Studart, A. R. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202002149 · Cited by 63
Yao, X., Shamsaei, E., Wang, W., Zhang, S., Sagoe‐Crentsil, K., & Duan, W. (2020) · Carbon · doi:10.1016/j.carbon.2020.08.051 · Cited by 61
Structural hierarchy defeats alloy cracking
An, X. (2021) · Science · doi:10.1126/science.abk1671 · Cited by 62
Pu, B., Zhang, X., Zhao, D., He, C., Shi, C., Liu, E., Sha, J., & Zhao, N. (2021) · Carbon · doi:10.1016/j.carbon.2021.07.042 · Cited by 59
Golman, M., Abraham, A. C., Kurtaliaj, I., Marshall, B. P., Hu, Y., Schwartz, A. G., Guo, X.-D. E., Birman, V., Thurner, P. J., Genin, G. M., et al. (2021) · Science Advances · doi:10.1126/sciadv.abi5584 · Cited by 59
Oxidation kinetics of overstoichiometric TiB2 thin films grown by DC magnetron sputtering
Dorri, S., Pališaitis, J., Greczyński, G., Petrov, I., Birch, J., Hultman, L., & Bakhit, B. (2022) · Corrosion Science · doi:10.1016/j.corsci.2022.110493 · Cited by 59
Functional polymer–ceramic hybrid coatings: Status, progress, and trend
Zhang, Z., Huang, Y., Xie, Q., Liu, G., Ma, C., & Zhang, G. (2024) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2024.101840 · Cited by 63
Cement-based biomimetic metamaterials
She, W., Wu, Z., Yang, J., Pan, H., Du, F., Du, Z., & Miao, C. (2024) · Journal of Building Engineering · doi:10.1016/j.jobe.2024.110050 · Cited by 80
Tough double-bouligand architected concrete enabled by robotic additive manufacturing
Prihar, A., Gupta, S., Esmaeeli, H. S., & Moini, R. (2024) · Nature Communications · doi:10.1038/s41467-024-51640-y · Cited by 59
Liu, J., Zhang, L., Yuan, B., Zhang, Y., Yang, Z., & Huang, J. (2024) · Materials & Design · doi:10.1016/j.matdes.2024.113338 · Cited by 59
Gilles Lubineau, A., Alfano, M., Tao, R., Wagih, A., Yudhanto, A., Li, X., Almuhammadi, K., Hashem, M., Hu, P., Mahmoud, H. A., et al. (2024) · Advanced Materials · doi:10.1002/adma.202407132 · Cited by 59
Tensile and flexural properties of multilayered metal/intermetallics composites
Sun, Y., Chen, J., Ma, F., Ameyama, K., Xiao, W., & Ma, C. (2015) · Materials Characterization · doi:10.1016/j.matchar.2015.02.018 · Cited by 59
“In recent years, the composites with multilayered (or laminated) structure have been the focus of research because of their impressive strength, toughness and other mechanical properties [1–4].”
BackgroundA study of lattice elasticity from low entropy metals to medium and high entropy alloys
Huang, E., Yu, D., Yeh, J. W., Lee, C., An, K., & Tu, S.-Y. (2015) · Scripta Materialia · doi:10.1016/j.scriptamat.2015.01.011 · Cited by 59
Brieland-shoultz, A. C., Tawfick, S., Park, S. J., Bedewy, M., Maschmann, M. R., Baur, J. W., & Hart, A. J. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400851 · Cited by 61
Stepwise graded struts for maximizing energy absorption in lattices
Mueller, J., & Shea, K. (2018) · Extreme Mechanics Letters · doi:10.1016/j.eml.2018.10.006 · Cited by 61
Metadata
- Authors
- Ritchie, R. O.
- Affiliations
- Lawrence Berkeley National Laboratory (US)
- Corresponding author
- Ritchie, Robert O.
- ORCID
- Ritchie, Robert O.
- Venue
- Nature Materials
- Published
- 2011-10-24
- Volume
- 10
- Issue
- 11
- Pages
- 817-822
- ISSN
- 1476-1122 (ISSN-L)
- 1476-4660
- OpenAlex
- W1971974144
- Cited by
- 3,989
- References
- 27
- Citations by year
- 2026: 458 · 2025: 556 · 2024: 474 · 2023: 385 · 2022: 398 · 2021: 332 · 2020: 280 · 2019: 259 · 2018: 242 · 2017: 172 · 2016: 140 · 2015: 120 · 2014: 81 · 2013: 62 · 2012: 30
- FWCI
- 27.12
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- www.springer.com/tdm (vor)
- Locations
- Nature Materials (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Metals and Alloys › Microstructure and mechanical properties
- Physical Sciences › Materials Science › Biomaterials › Calcium Carbonate Crystallization and Inhibition
- Physical Sciences › Materials Science › Metals and Alloys › Metallic Glasses and Amorphous Alloys
- Keywords
- strength-toughness trade-off, damage tolerance, fracture resistance, amorphous alloys, biological materials, advanced ceramics, ductility
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.