Multi-shape active composites by 3D printing of digital shape memory polymers
Open accessThe DOI matches its Crossref record; 30 of the 31 references it cites were found in a registry or an index.
Abstract
Recent research using 3D printing to create active structures has added an exciting new dimension to 3D printing technology. After being printed, these active, often composite, materials can change their shape over time; this has been termed as 4D printing. In this paper, we demonstrate the design and manufacture of active composites that can take multiple shapes, depending on the environmental temperature. This is achieved by 3D printing layered composite structures with multiple families of shape memory polymer (SMP) fibers – digital SMPs - with different glass transition temperatures (Tg) to control the transformation of the structure. After a simple single-step thermomechanical programming process, the fiber families can be sequentially activated to bend when the temperature is increased. By tuning the volume fraction of the fibers, bending deformation can be controlled. We develop a theoretical model to predict the deformation behavior for better understanding the phenomena and aiding the design. We also design and print several flat 2D structures that can be programmed to fold and open themselves when subjected to heat. With the advantages of an easy fabrication process and the controllable multi-shape memory effect, the printed SMP composites have a great potential in 4D printing applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures










Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“the first example of 3D printed multiple-way SMPs was provided by Wu et al. [206], who fabricated layered composite structures with SMPs having different glass transition temperatures, by using a multi-material Polyjet 3D printer.”
From Two-Way and Multiple-Way Shape Memory Polymers for Soft Robotics: An Overview (2020) · cites this paper as [206]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Inkjet Printing—Process and Its Applications
Singh, M., Haverinen, H. M., Dhagat, P., & Jabbour, G. E. (2010) · Advanced Materials · doi:10.1002/adma.200901141 · Cited by 2,375 · cited 1×
“Active materials and structures that can change their properties and shape have great technological potential, e.g., in sensors, robotics, self-packaging devices, aerospace exploring and bio-medical applications 15–18 .”
Light-induced shape-memory polymers
Lendlein, A., Jiang, H., Jünger, O., & Langer, R. (2005) · Nature · doi:10.1038/nature03496 · Cited by 2,006 · cited 1×
“Among active materials, shape memory polymers (SMPs) have been intensively studied because of their ability to generate a large shape change under an external stimuli us, such as temperature 19–21 , light 22 , electric 23,24 and magnetic fields 25,26 .”
Review of progress in shape-memory polymers
Liu, C., Qin, H., & Mather, P. T. (2007) · Journal of Materials Chemistry · doi:10.1039/b615954k · Cited by 1,942
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M. (2014) · Analytical Chemistry · doi:10.1021/ac403397r · Cited by 1,746 · cited 1×
“1038/srep24224 λ α = + − < < t T t T t t ( ) 1 [ ( ) ], 0 , (2) Thermal H 1”
Shape-memory polymers and their composites: stimulus methods and applications
Leng, J., Lan, X., Liu, Y., & Du, S. (2011) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.03.001 · Cited by 1,495 · cited 1×
“Active materials and structures that can change their properties and shape have great technological potential, e.g., in sensors, robotics, self-packaging devices, aerospace exploring and bio-medical applications 15–18 .”
A review on 3D micro-additive manufacturing technologies
Vaezi, M., Seitz, H., & Yang, S. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4605-2 · Cited by 1,293 · cited 1×
“e y t t t t y t t t ( , ) ln ( ) ( ) ( ) , (6) Thermal b 0 2 3”
Recent advances in polymer shape memory
Xie, T. (2011) · Polymer · doi:10.1016/j.polymer.2011.08.003 · Cited by 870
3D printing of composite calcium phosphate and collagen scaffolds for bone regeneration
Inzana, J. A., Olvera, D., Fuller, S. M., Kelly, J. P., Graeve, O. A., Schwarz, E. M., Kates, S. L., & Awad, H. A. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.01.064 · Cited by 840 · cited 1×
“λ λ = ∆ y t y t y t ( , ) ( , ) ( , ), (7) Mech Thermal 0”
Mohr, R., Kratz, K., Weigel, T., Lucka-Gabor, M., Moneke, M., & Lendlein, A. (2006) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0600079103 · Cited by 819 · cited 1×
“Among active materials, shape memory polymers (SMPs) have been intensively studied because of their ability to generate a large shape change under an external stimuli us, such as temperature 19–21 , light 22 , electric 23,24 and magnetic fields 25,26 .”
Research works printed but not linked: 1
- Tibbits, S. The emergence of “4D printing”. TED conference. (2013) Available at: http://www.ted.com/talks/skylar_tibbits_the_emergence_of_4d_printing?language=en (Accessed: 25th July 2013).
Cited by
Items 201–300 of 399
Mailen, R. W., Wagner, C. H., Bang, R. S., Zikry, M. A., Dickey, M. D., & Genzer, J. (2019) · Smart Materials and Structures · doi:10.1088/1361-665x/ab030a · Cited by 30
Use of shear thickening fluids in sport protection applications: a review
Parisi, M., Fauci, G. L., Pugno, N. M., & Colonna, M. (2023) · Frontiers in Materials · doi:10.3389/fmats.2023.1285995 · Cited by 31
Additive manufacturing of soft robots
Walker, S., Yirmibeşoğlu, O. D., Daalkhaijav, U., & Mengüç, Y. (2018) · Elsevier eBooks · doi:10.1016/b978-0-08-102260-3.00014-7 · Cited by 30
3D and 4D Printing of Functional and Smart Composite Materials
Palmero, E. M., & Bollero, A. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-819724-0.00008-2 · Cited by 36
Materials and manufacturing strategies for mechanically transformative electronics
Byun, S.-H., Sim, J. Y., Agno, K., & Jeong, J. (2020) · Materials Today Advances · doi:10.1016/j.mtadv.2020.100089 · Cited by 29
Comprehensive study on shape shifting behaviors in FDM-based 4D printing of bilayer structures
Nezhad, I. S., Golzar, M., Behravesh, A. H., & Zare, S. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-08741-z · Cited by 34
Functional flexibility: The potential of morphing composites
Jones, M. P., Murali, G. G., Laurin, F., Robinson, P., & Bismarck, A. (2022) · Composites Science and Technology · doi:10.1016/j.compscitech.2022.109792 · Cited by 29
Compliant Robotics in Space: A Prospective Review of Soft and Deformable Systems for Space Missions
Nohooji, H. R., & Voos, H. (2025) · Advanced Intelligent Systems · doi:10.1002/aisy.202400785 · Cited by 36
Multi‐Material Additive Manufacturing of Soft Robotic Systems: A Comprehensive Review
Raj, R., Song, Q., & Juang, J. (2025) · Advanced Robotics Research · doi:10.1002/adrr.202500064 · Cited by 36
Micalizzi, S., Lantada, A. D., & Maria, C. D. (2019) · Smart Materials and Structures · doi:10.1088/1361-665x/ab3b35 · Cited by 28
3D printed ferroelectret with giant piezoelectric coefficient
Kumar, A., Saini, D., & Mandal, D. (2022) · Applied Physics Letters · doi:10.1063/5.0091808 · Cited by 26
Zhuo, S., Geever, L. M., Halligan, E., Tie, B. S. H., & Breheny, C. (2022) · Journal of Functional Biomaterials · doi:10.3390/jfb13040262 · Cited by 27
Ghosh, S., Chaudhuri, S., Roy, P., & Lahiri, D. (2022) · Regenerative Engineering and Translational Medicine · doi:10.1007/s40883-022-00288-5 · Cited by 30
Samal, B. B., Jena, A., Varshney, S. K., & Kumar, C. S. (2023) · Smart Materials and Structures · doi:10.1088/1361-665x/acda6e · Cited by 27
“Two prototypes, designed to mimic an insect and a smart hook, have been reported to undergo an extremely complex shape change [13].”
Passively addressed robotic morphing surface (PARMS) based on machine learning
Wang, J., Sotzing, M., Lee, M., & Chortos, A. (2023) · Science Advances · doi:10.1126/sciadv.adg8019 · Cited by 26
“…have been developed on the basis of the spatial patterning of materials that deform in response to a global external stimulus (temperature, humidity, etc.), such as liquid crystal elastomers (LCEs) ( 7 , 8 ), shape memory alloys ( 9 ), hydrogels ( 10 , 11 ), and shape memory polymers ( 12 , 13 ).”
Materials, design, and fabrication of shape programmable polymers
Kuang, X., Roach, D. J., Hamel, C. M., Yu, K., & Qi, H. J. (2020) · Multifunctional Materials · doi:10.1088/2399-7532/aba1d9 · Cited by 29
Self-citationFour-dimensional Printing —— the Additive Manufacturing Technology of Intelligent Components
Yusheng, S., Wu, H., Chunze, Y., Xiao, Y., Chen, D., Zhang, C., Bin, S., Song, B., Li, Z., Pang, S., et al. (2020) · Journal of Mechanical Engineering · doi:10.3901/jme.2020.15.001 · Cited by 30
“图 20 利用不同玻璃化温度的形状记忆高分子材料编码设计,实现可控变形行为的 4D 打印复合材料([37])”
Programming the microstructure of magnetic nanocomposites in DLP 3D printing
Lantean, S., Roppolo, I., Sangermano, M., Hayoun, M., Dammak, H., & Rizza, G. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.102343 · Cited by 33
“In polymeric 4D printing, smart materials, either neat polymers or composites, must possess one or more functions that can be activated by physicochemical stimuli including, solvents [24,25], light [26–28], temperature [29–33], electric charges [34–36], and pH [37,38].”
BackgroundSurface texture and thermo-mechanical properties of material extruded and ironed polylactic acid
Caputo, M. P., Rashwan, O. H., Waryoba, D. R., & McDade, K. K. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.103084 · Cited by 25
Wang, K., Chen, J., Wei, K., Yang, X., & Yang, X. (2023) · Composite Structures · doi:10.1016/j.compstruct.2023.117671 · Cited by 25
Controlled helical deformation of programmable bilayer structures: design and fabrication
Feng, Y., Xu, J., Zeng, S., Gao, Y., & Tan, J. (2020) · Smart Materials and Structures · doi:10.1088/1361-665x/ab905d · Cited by 27
Thermally induced deformations in multi-layered polymeric struts
Hanuhov, T., & Cohen, N. (2021) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2021.106959 · Cited by 25
Dimassi, S., Demoly, F., Belkebir, H., Cruz, C., Kim, K.-Y. J., Gomes, S., Qi, H. J., & André, J. (2022) · Computers in Industry · doi:10.1016/j.compind.2022.103824 · Cited by 24
Self-citationHybrid additive manufacturing of a piezopolymer-based inertial sensor
Bernasconi, R., Hatami, D., Hosseinabadi, H. N., Zega, V., Corigliano, A., Suriano, R., Levi, M., Langfelder, G., & Magagnin, L. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.103091 · Cited by 22
Kameoka, M., Watanabe, Y., Shiblee, M. N. I., Kawakami, M., Ogawa, J., Khosla, A., Furukawa, H., Zhang, S., Hirai, S., & Wang, Z. (2023) · Machines · doi:10.3390/machines11010103 · Cited by 24
Relationship between programming stress and residual strain in FDM 4D printing
Cerbe, F., Mahlstedt, D., Sinapius, M., Hühne, C., & Böl, M. (2023) · Progress in Additive Manufacturing · doi:10.1007/s40964-023-00477-w · Cited by 24
Mechanics Design for Buckling of Thin Ribbons on an Elastomeric Substrate Without Material Failure
Wang, A., Avila, R. O., & Ma, Y. (2017) · Journal of Applied Mechanics · doi:10.1115/1.4037149 · Cited by 22
Zhang, J., Liu, X., Zao, W., Feng, H., Hou, Y., & Huo, A. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c20528 · Cited by 21
4D printing of shape memory composites with remotely controllable local deformation
Ren, L., Wang, Z., Ren, L., Liu, Q., Li, W., Song, Z., Li, B., Wu, Q., & Zhou, X. (2023) · Materials Today Chemistry · doi:10.1016/j.mtchem.2023.101470 · Cited by 21
Smart Materials: The Next Generation
Shehata, N., Abdelkareem, M. A., Sayed, E. T., Egirani, D. E., & Opukumo, A. W. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-815732-9.00062-0 · Cited by 27
Peng, B., Yang, Y., & Cavicchi, K. A. (2020) · Multifunctional Materials · doi:10.1088/2399-7532/abcbe1 · Cited by 24
“Instead of directly assigning the digital materials to different locations, Wu et al [118] printed laminated composite materials composed of two digital materials and a rubbery matrix to realize sequential shapeshifting after a single step programming.”
BackgroundExoForm: Shape Memory and Self-Fusing Semi-Rigid Wearables
Qin, F., Cheng, H., Sneeringer, R., Vlachostergiou, M., Acharya, S., Liu, H., Majidi, C., Islam, M. F., & Yao, L. (2021) · CHI Conference Extended Abstracts on Human Factors in Computing Systems (CHI EA) · doi:10.1145/3411763.3451818 · Cited by 20
“and dynamic designs emerge via embedded, pre-programed stimulus responses in 3D printed shape memory materials [31, 60] like”
BackgroundThe Shape Memory Properties and Actuation Performances of 4D Printing Poly (Ether-Ether-Ketone)
Zhou, Y., Ren, L., Zang, J., & Zhang, Z. (2022) · Polymers · doi:10.3390/polym14183800 · Cited by 25
Shape memory polymer blends and composites for 3D and 4D printing applications
Salimon, A. I., Senatov, F. S., Kalyaev, V., & Korsunsky, A. M. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-816805-9.00006-5 · Cited by 26
PLA Composite Matrix as Functional Prototypes for Four Dimensional Applications
Kumar, S., Singh, R., Singh, T. P., & Batish, A. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-803581-8.11595-4 · Cited by 23
Digital inkjet printing in three dimensions with multiple ceramic compositions
Lee, J.-H., Kim, J.-H., Hwang, K., Hwang, H., & Han, K. (2020) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2020.09.044 · Cited by 19
Hosseinzadeh, M., Ghoreishi, M., & Narooei, K. (2021) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x211028286 · Cited by 22
“The structure of these materials is in a way that can be stimulated by external actuators such as light, electrical field, magnetic field, pH, and heat (Maleki-Bigdeli et al., 2020; Roudbarian et al., 2019a; Wu et al., 2016).”
Background4D printing of shape memory polymers: Research status and application prospects
Wei, H., Wan, X., Liu, Y., & Leng, J. (2017) · Scientia Sinica Technologica · doi:10.1360/n092017-00156 · Cited by 24
Light activation of 3D‐printed structures: from millimeter to sub‐micrometer scale
Jeong, H. Y., An, S., & Jun, Y. C. (2022) · Nanophotonics · doi:10.1515/nanoph-2021-0652 · Cited by 20
Monolithic processing of a layered flexible robotic actuator film for kinetic electronics
Zhang, S., Wang, J., Hayashi, K., & Sassa, F. (2021) · Scientific Reports · doi:10.1038/s41598-021-99500-9 · Cited by 20
Thermal transport in 3D printed shape memory polymer metamaterials
Farzinazar, S., Wang, Y., Owens, C. A.-H., Yang, C., Lee, H., & Lee, J. (2022) · APL Materials · doi:10.1063/5.0094036 · Cited by 19
Yi, H. (2021) · Engineering Construction & Architectural Management · doi:10.1108/ecam-05-2021-0428 · Cited by 23
AziziHariri, P., Ebrahimi, A. H., Zamyad, H., & Sahebian, S. (2023) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2023.128435 · Cited by 17
Application of phase change materials in 4D printing: A review
Mehta, P., & Sahlot, P. (2021) · Materials Today Proceedings · doi:10.1016/j.matpr.2021.05.664 · Cited by 17
Wang, H., Zhang, Z., Fu, K., & Li, Y. (2023) · Polymers · doi:10.3390/polym15183740 · Cited by 20
“Wu [21] and Yuan [22] designed a “corrugated” deformation and an “origami crane” structure by exploiting the deformation mismatch between the elastic phase and the shape memory phase.”
Background4D Printed Bifurcated Stents with Kirigami-Inspired Structures
Kim, D., Kim, T., & Lee, Y. (2019) · Journal of Visualized Experiments · doi:10.3791/59746 · Cited by 20
Mono–Material 4D Printing of Digital Shape–Memory Components
Niazy, D., Elsabbagh, A., & Ismail, M. R. (2021) · Polymers · doi:10.3390/polym13213767 · Cited by 18
“Most two-way shape-memory effects previously achieved in polymers required composite formation [12,15].”
BackgroundLiu, Z., Liu, H., Duan, G., & Tan, J. (2019) · Mathematics and Mechanics of Solids · doi:10.1177/1081286519877563 · Cited by 18
“[24] constructed composite bilayer structures with two kinds of composite material consisting of elastomer matrix and SMP fiber.”
BackgroundSmart polymers for 3D printing applications: current status and future outlook
Singh, N., Sinha, P., Sinha, D. K., & Banerjee, S. (2025) · Polymer Chemistry · doi:10.1039/d5py00741k · Cited by 22
Liu, Y., Wu, J., Zhang, J., & Peng, W. B. (2017) · Journal of Medical and Biological Engineering · doi:10.1007/s40846-017-0263-z · Cited by 17
“The SMP material can be processed like general plastic by injection molding or extrusion molding, coating, or even 3D printing, to obtain the required special shapes, at a temperature of approximately 200 C [20].”
BackgroundSelf-citationFundamentals and working mechanisms of artificial muscles with textile application in the loop
Grellmann, H., Lohse, F., Kamble, V. G., Winger, H., Nocke, A., Hickmann, R., Wießner, S., & Cherif, C. (2021) · Smart Materials and Structures · doi:10.1088/1361-665x/ac3d9d · Cited by 16
Trends in additive manufacturing of chromatographic and membrane materials
Hearn, M. T. (2017) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2017.11.003 · Cited by 15
Direct ink writing of polymers and their composites, and related applications
Zhang, X., Jia, X., & Wang, X. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-819535-2.00013-2 · Cited by 16
Baldemir, A., Ildız, N., Yusufbeyoğlu, S., & Öçsoy, İ. (2023) · Inorganic and Nano-Metal Chemistry · doi:10.1080/24701556.2023.2240757 · Cited by 14
Thermoplastic shape memory polymers with tailor-made trigger temperature
Fu, X., Yuan, Y., Liu, Z., Yan, P., Zhou, C., & Lei, J. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.06.001 · Cited by 15
Morphing wing with compliant aileron and slat for unmanned aerial vehicles
Menshchikov, A., & Somov, A. (2019) · Physics of Fluids · doi:10.1063/1.5086976 · Cited by 14
4D Printing of Continuous Shape Representation
Ahn, S., Byun, J., Joo, H., Jeong, J., Lee, D., & Cho, K. (2021) · Advanced Materials Technologies · doi:10.1002/admt.202100133 · Cited by 17
3D printed microfluidics-based reconfigurable antenna
Anwar, M. S., & Bangert, A. (2017) · IEEE MTT-S International Microwave Workshop Series on Advanced Materials and Processes for RF and THz Applications (IMWS-AMP) · doi:10.1109/imws-amp.2017.8247364 · Cited by 14
3D Printed Actuators: Reversibility, Relaxation, and Ratcheting
Zhao, S., Maas, M., Jansen, K. M. B., & van Hecke, M. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201905545 · Cited by 15
Anju, M. S., Raj, D. K., Madathil, B. K., Kasoju, N., & Kumar, P. R. A. (2021) · Springer eBooks · doi:10.1007/978-981-16-0002-9_16 · Cited by 14
Wei, Y., Huang, P., Li, Z., Wang, P., & Feng, X. (2021) · Smart Materials and Structures · doi:10.1088/1361-665x/ac13b3 · Cited by 13
“The active materials, which are environmentally responsive, mainly category into shape-memory polymers [1, 2], dielectric elastomers [3], and liquid-crystal elastomers [4, 5].”
Advances in nanocomposite material for Fused Filament Fabrication
Patel, A. M., & Taufik, M. (2022) · Polymer-Plastics Technology and Materials · doi:10.1080/25740881.2022.2072225 · Cited by 13
Insight into constitutive theories of 4D printed polymer materials: a review
Rodriguez-Morales, J. A., Duan, H., Gu, J., Zeng, H., & Sun, H. (2024) · Smart Materials and Structures · doi:10.1088/1361-665x/ad523c · Cited by 13
Delbart, R., Robert, C., Hoang, T. Q. T., & Martínez-Hergueta, F. (2024) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2024.108381 · Cited by 14
Vidakis, N., Petousis, M., David, C., Sagris, D., Mountakis, N., Spiridaki, M., Moutsopoulou, A. J., & Nasikas, N. K. (2024) · Bioprinting · doi:10.1016/j.bprint.2024.e00361 · Cited by 12
An, Y., Kim, J., Goo, N. S., Kim, Y., Park, J. K., & Yu, W. (2018) · Smart Materials and Structures · doi:10.1088/1361-665x/aad936 · Cited by 13
Smart Materials for 4D Printing: A Review on Developments, Challenges and Applications
Sreenivasulu, R. (2021) · Lecture notes in mechanical engineering · doi:10.1007/978-981-16-4222-7_1 · Cited by 16
Multi-material 4D printing to realize two-phase morphing in self-actuating structures
Lee, H. M., Han, S. J., Kim, M., & Yoon, G. H. (2024) · Smart Materials and Structures · doi:10.1088/1361-665x/ad21b5 · Cited by 12
“…production of magnetic hydrogel-based soft actuators using multi-material direct ink printing [36], the proposal of bi-layer composite actuators for voltage control [37], and the realization of self-folding and self-opening structure through the utilization of multi-shape active composites [38].”
4D Printing and Its Biomedical Applications
Akbari, S., Zhang, Y., Wang, D., & Ge, Q. (2018) · Wiley eBooks · doi:10.1002/9783527813704.ch14 · Cited by 21
Direct Writing Corrugated PVC Gel Artificial Muscle via Multi-Material Printing Processes
Luo, B., Zhong, Y., Chen, H., Zhu, Z., & Wang, Y. (2021) · Polymers · doi:10.3390/polym13162734 · Cited by 11
Benyahia, K., Gomes, S., André, J., Qi, H. J., & Demoly, F. (2023) · Smart Materials and Structures · doi:10.1088/1361-665x/acd092 · Cited by 12
Self-citationSimple triple-state polymer actuators with controllable folding characteristics
Chen, S., Li, J., Fang, L., Zhu, Z., & Kang, S. H. (2017) · Applied Physics Letters · doi:10.1063/1.4979560 · Cited by 12
Mo, F., Ban, J., Pan, L., Shi, B., & Lu, S. (2019) · New Journal of Chemistry · doi:10.1039/c8nj05451g · Cited by 10
Kuang, X. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-818411-0.00004-5 · Cited by 12
A Smart pH-Responsive Three Components Luminescent Hydrogel
Li, Y., Liu, W., Cheng, L., Huang, P., Yu, P., Wu, Y., Li, X., Li, X., & Fan, X. (2016) · Journal of Functional Biomaterials · doi:10.3390/jfb7030025 · Cited by 10
Review on various materials used in Additive Manufacturing
Sangeetha, N., Monish, P., & Brathikan, V. M. (2022) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/1228/1/012015 · Cited by 10
Multi-Material Production of 4D Shape Memory Polymer Composites
Nyabadza, A., Kane, J., Vázquez, M., Sreenilayam, S. P., & Brabazon, D. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-819724-0.00057-4 · Cited by 14
Vidakis, N., Saltas, V., David, C., Sagris, D., Nasikas, N. K., Mountakis, N., Spiridaki, M., & Petousis, M. (2024) · International Journal on Interactive Design and Manufacturing (IJIDeM) · doi:10.1007/s12008-024-02144-y · Cited by 12
An analysis of the methods and materials for 4-dimensional printing
Manikandan, N., Rajesh, P. K., & Harish, V. I. (2020) · Materials Today Proceedings · doi:10.1016/j.matpr.2020.05.551 · Cited by 11
Shape-locking in architected materials through 3D printed magnetically activated joints
de Jong, P. H., Salvatori, Y., Libonati, F., Mirzaali, M. J., & ZADPOOR, A. A. (2023) · Materials & Design · doi:10.1016/j.matdes.2023.112427 · Cited by 9
Synthesis and Characteristics of Thermo-Photo Staged-Response Shape Memory Poly(aryl ether ketone)s
Gu, Y., Zhao, Z., Chao, D., & Liu, X. (2019) · Macromolecular Research · doi:10.1007/s13233-020-8061-9 · Cited by 9
4D-actuators by 3D-printing combined with water-based curing
Mazurek‐Budzyńska, M., Behl, M., Neumann, R., & Lendlein, A. (2021) · Materials Today Communications · doi:10.1016/j.mtcomm.2021.102966 · Cited by 10
Wang, Z., Zhang, Y., Niu, Y., Chen, X., & Song, J. (2023) · Materials · doi:10.3390/ma16103805 · Cited by 8
“Wu et al. [11] demonstrated that the programmed composition of mechanically different SMPs enabled the evolution of curling shapes exhibiting multiple shape memory effects (SMEs).”
Bouguermouh, K., Habibi, M., Laperrière, L., Monplaisir, D., Li, Z., & Abdin, Y. (2025) · Polymer · doi:10.1016/j.polymer.2025.128587 · Cited by 8
Hydrogen Bond Driven Shape Memory Polymers: Progress and Outlook
Basak, S., & De, P. (2025) · ChemistrySelect · doi:10.1002/slct.202501828 · Cited by 9
Metamaterials and smart structure integration enabled by 3D and 4D printing technologies: A review
Huang, Y., Zhang, Y., Li, J., Hoang, T., & Jiang, Q. (2025) · Materials and Emerging Technologies for Sustainability · doi:10.1142/s3060932125300033 · Cited by 9
Yang, J., Liao, Z., Hossain, M., Huang, G., Wang, K., & Yao, X. (2023) · Mechanics Research Communications · doi:10.1016/j.mechrescom.2023.104212 · Cited by 8
Varadharajan, S., Vasanthan, K. S., & Agarwal, P. (2023) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2022.0376 · Cited by 10
“Wu et al. 253 developed a design technique for the fabrication of a flat-layered composite containing numerous digital SMPP fibers in the matrix by combining 4D printing with traditional manufacturing.”
Kumar, R., Singh, S., Sushant, S., Babbar, A., Sharma, S. K., Singh, G., Goel, P., & Ranjan, N. (2024) · International Journal on Interactive Design and Manufacturing (IJIDeM) · doi:10.1007/s12008-024-01830-1 · Cited by 9
Rui, F., & Zhao, G. (2022) · Engineering Analysis with Boundary Elements · doi:10.1016/j.enganabound.2022.03.011 · Cited by 9
Evolution and emerging trends of 4D printing: a bibliometric analysis
Zhang, W., Ge, Z., & Li, D. (2022) · Manufacturing Review · doi:10.1051/mfreview/2022028 · Cited by 10
Phase field topology optimisation for 4D printing
Garcke, H., Lam, K. F., Nürnberg, R., & Signori, A. (2023) · ESAIM Control Optimisation and Calculus of Variations · doi:10.1051/cocv/2023012 · Cited by 9
“In particular, this opens up the design of multiphase PACs that can memorise more than two shapes [36, 45, 58, 62, 66].”
BackgroundA Voyage From 3D to 4D Printing in Nanomedicine and Healthcare: Part I
Kumari, G., Kumar, A., Singh, S., Hussain, A., Altamimi, M., Madhyastha, H., Webster, T. J., & Dev, A. (2022) · Nanomedicine · doi:10.2217/nnm-2021-0285 · Cited by 9
Bioinspired porous magnetoresponsive soft actuators with programmable 3D curved shapes
Zhu, H., Ye, X., Tian, Y., Ge, Y., Huang, H., Lim, Z. H., Gao, M. X., Liu, B. J., Zhao, Y., Zhou, K., et al. (2024) · Applied Physics Reviews · doi:10.1063/5.0231351 · Cited by 7
Cheung, T. C., Choi, S. Y., & Jiang, S. (2025) · Journal of Applied Polymer Science · doi:10.1002/app.56710 · Cited by 7
Dynamic solar shadings: Redefining the building envelope
Wijewardane, S., Vasilakopoulou, K., & Santamouris, M. (2025) · Solar Compass · doi:10.1016/j.solcom.2025.100139 · Cited by 12
Design and analysis of smart diaphragm based on shape memory polymer
Tao, R., Liu, X., Yang, Q., & He, X. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.46557 · Cited by 7
Deformable Morphing and Multivariable Stiffness in the Evolutionary Robotics
Feng, H., Xue, Y., Li, H., Tang, Z., Wang, W., Wei, Z., Zeng, G., Li, M., & Dai, J. S. (2023) · International Journal of Automotive Manufacturing and Materials · doi:10.53941/ijamm.2023.100013 · Cited by 9
Rolling of 3D Printed Dual‐Layer Beam into a Cylinder by Ethanol Absorption
Choi, W., Kim, T., & Lee, Y. (2018) · Macromolecular Materials and Engineering · doi:10.1002/mame.201700675 · Cited by 8
Moisture outgassing from siloxane elastomers containing surface-treated-silica fillers
Sharma, H. N., Lenhardt, J. M., Loui, A., Allen, P. G., McLean, W., Maxwell, R. S., & Dinh, L. N. (2019) · npj Materials Degradation · doi:10.1038/s41529-019-0083-4 · Cited by 7
Metadata
- Authors
- Wu, J., Yuan, C., Ding, Z., Isakov, M., Mao, Y., Wang, T., Dunn, M. L., & Qi, H. J.
- Affiliations
- Georgia Institute of Technology (US)
- Xi'an Jiaotong University (CN)
- Singapore University of Technology and Design (SG)
- Corresponding author
- Dunn, Martin L.
- Qi, H. Jerry
- Venue
- Scientific Reports
- Published
- 2016-04-13
- Volume
- 6
- Issue
- 1
- Pages
- 24224-24224
- ISSN
- 2045-2322 (ISSN-L)
- PMC
- PMC4829848
- OpenAlex
- W2336992486
- Cited by
- 399
- References
- 31
- Citations by year
- 2026: 12 · 2025: 23 · 2024: 39 · 2023: 37 · 2022: 43 · 2021: 55 · 2020: 57 · 2019: 49 · 2018: 39 · 2017: 36 · 2016: 8
- FWCI
- 39.13
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- cc-by
- creativecommons.org/licenses/by/4.0 (tdm)
- creativecommons.org/licenses/by/4.0 (vor)
- Locations
- Scientific Reports (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- Funders
- National Science Foundation (1462895, 1462894, 1404621)
- National Research Foundation
- National Research Foundation Singapore
- Singapore University of Technology and Design
- Digital Manufacturing and Design Centre, Singapore University of Technology and Design
- Division of Civil, Mechanical and Manufacturing Innovation (CMMI-1462895, CMMI-1462894, 1462894, 1462895)
- Air Force Office of Scientific Research (FA9550-13-1-0088, FA9550-)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer composites and self-healing
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Keywords
- shape memory polymers, 4D printing, active composites, glass transition temperature, fiber volume fraction, bending deformation, folding and unfolding, deformation modeling, composite laminates
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.