Multi-shape active composites by 3D printing of digital shape memory polymers
Open accessThe DOI matches its Crossref record; 30 of the 31 references it cites were found in a registry or an index.
Abstract
Recent research using 3D printing to create active structures has added an exciting new dimension to 3D printing technology. After being printed, these active, often composite, materials can change their shape over time; this has been termed as 4D printing. In this paper, we demonstrate the design and manufacture of active composites that can take multiple shapes, depending on the environmental temperature. This is achieved by 3D printing layered composite structures with multiple families of shape memory polymer (SMP) fibers – digital SMPs - with different glass transition temperatures (Tg) to control the transformation of the structure. After a simple single-step thermomechanical programming process, the fiber families can be sequentially activated to bend when the temperature is increased. By tuning the volume fraction of the fibers, bending deformation can be controlled. We develop a theoretical model to predict the deformation behavior for better understanding the phenomena and aiding the design. We also design and print several flat 2D structures that can be programmed to fold and open themselves when subjected to heat. With the advantages of an easy fabrication process and the controllable multi-shape memory effect, the printed SMP composites have a great potential in 4D printing applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures










Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“the first example of 3D printed multiple-way SMPs was provided by Wu et al. [206], who fabricated layered composite structures with SMPs having different glass transition temperatures, by using a multi-material Polyjet 3D printer.”
From Two-Way and Multiple-Way Shape Memory Polymers for Soft Robotics: An Overview (2020) · cites this paper as [206]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Inkjet Printing—Process and Its Applications
Singh, M., Haverinen, H. M., Dhagat, P., & Jabbour, G. E. (2010) · Advanced Materials · doi:10.1002/adma.200901141 · Cited by 2,375 · cited 1×
“Active materials and structures that can change their properties and shape have great technological potential, e.g., in sensors, robotics, self-packaging devices, aerospace exploring and bio-medical applications 15–18 .”
Light-induced shape-memory polymers
Lendlein, A., Jiang, H., Jünger, O., & Langer, R. (2005) · Nature · doi:10.1038/nature03496 · Cited by 2,006 · cited 1×
“Among active materials, shape memory polymers (SMPs) have been intensively studied because of their ability to generate a large shape change under an external stimuli us, such as temperature 19–21 , light 22 , electric 23,24 and magnetic fields 25,26 .”
Review of progress in shape-memory polymers
Liu, C., Qin, H., & Mather, P. T. (2007) · Journal of Materials Chemistry · doi:10.1039/b615954k · Cited by 1,942
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M. (2014) · Analytical Chemistry · doi:10.1021/ac403397r · Cited by 1,746 · cited 1×
“1038/srep24224 λ α = + − < < t T t T t t ( ) 1 [ ( ) ], 0 , (2) Thermal H 1”
Shape-memory polymers and their composites: stimulus methods and applications
Leng, J., Lan, X., Liu, Y., & Du, S. (2011) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.03.001 · Cited by 1,495 · cited 1×
“Active materials and structures that can change their properties and shape have great technological potential, e.g., in sensors, robotics, self-packaging devices, aerospace exploring and bio-medical applications 15–18 .”
A review on 3D micro-additive manufacturing technologies
Vaezi, M., Seitz, H., & Yang, S. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4605-2 · Cited by 1,293 · cited 1×
“e y t t t t y t t t ( , ) ln ( ) ( ) ( ) , (6) Thermal b 0 2 3”
Recent advances in polymer shape memory
Xie, T. (2011) · Polymer · doi:10.1016/j.polymer.2011.08.003 · Cited by 870
3D printing of composite calcium phosphate and collagen scaffolds for bone regeneration
Inzana, J. A., Olvera, D., Fuller, S. M., Kelly, J. P., Graeve, O. A., Schwarz, E. M., Kates, S. L., & Awad, H. A. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.01.064 · Cited by 840 · cited 1×
“λ λ = ∆ y t y t y t ( , ) ( , ) ( , ), (7) Mech Thermal 0”
Mohr, R., Kratz, K., Weigel, T., Lucka-Gabor, M., Moneke, M., & Lendlein, A. (2006) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0600079103 · Cited by 819 · cited 1×
“Among active materials, shape memory polymers (SMPs) have been intensively studied because of their ability to generate a large shape change under an external stimuli us, such as temperature 19–21 , light 22 , electric 23,24 and magnetic fields 25,26 .”
Research works printed but not linked: 1
- Tibbits, S. The emergence of “4D printing”. TED conference. (2013) Available at: http://www.ted.com/talks/skylar_tibbits_the_emergence_of_4d_printing?language=en (Accessed: 25th July 2013).
Cited by
Printing ferromagnetic domains for untethered fast-transforming soft materials
Kim, Y., Yuk, H., Zhao, R., Chester, S. A., & Zhao, X. (2018) · Nature · doi:10.1038/s41586-018-0185-0 · Cited by 2,183
Momeni, F., M.Mehdi Hassani.N, S., Liu, X., & Ni, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.02.068 · Cited by 1,165
Multimaterial 4D Printing with Tailorable Shape Memory Polymers
Ge, Q., Sakhaei, A. H., Lee, H., Dunn, C. K., Fang, N. X., & Dunn, M. L. (2016) · Scientific Reports · doi:10.1038/srep31110 · Cited by 1,160
Self-citationAdvances in 4D Printing: Materials and Applications
Kuang, X., Roach, D. J., Wu, J., Hamel, C. M., Ding, Z., Wang, T., Dunn, M. L., & Qi, H. J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201805290 · Cited by 1,095
Self-citation3D printing of soft robotic systems
Wallin, T. J., Pikul, J., & Shepherd, R. F. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0002-2 · Cited by 942
Recent Progress on Polymer Materials for Additive Manufacturing
Tan, L. J., Zhu, W., & Zhou, K. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202003062 · Cited by 740
Direct 4D Printing Via Active Composite Materials
Ding, Z., Yuan, C., Peng, X., Wang, T., Qi, H. J., & Dunn, M. L. (2017) · Science Advances · doi:10.1126/sciadv.1602890 · Cited by 692
Self-citationMulti‐Material 3D and 4D Printing: A Survey
Rafiee, M., Farahani, R. D., & Therriault, D. (2020) · Advanced Science · doi:10.1002/advs.201902307 · Cited by 662
Printing, folding and assembly methods for forming 3D mesostructures in advanced materials
Zhang, Y., Zhang, F., Yan, Z., Ma, Q., Li, X., Huang, Y., & Rogers, J. A. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.19 · Cited by 620
Recent Progress in Additive Manufacturing of Fiber Reinforced Polymer Composite
Goh, G. D., Yap, Y. L., Agarwala, S., & Yeong, W. Y. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800271 · Cited by 621
González-Henríquez, C. M., Sarabia-Vallejos, M. A., & Rodriguez-Hernandez, J. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.03.001 · Cited by 562
3D Printing of Highly Stretchable, Shape-Memory, and Self-Healing Elastomer toward Novel 4D Printing
Kuang, X., Chen, K., Dunn, C. K., Wu, J., Li, V. C. F., & Qi, H. J. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b18265 · Cited by 523
Self-citationFast‐Response, Stiffness‐Tunable Soft Actuator by Hybrid Multimaterial 3D Printing
Zhang, Y., Zhang, N., Hingorani, H., Ding, N., Wang, D., Yuan, C., Zhang, B., Gu, G., & Ge, Q. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201806698 · Cited by 513
Self-citation3D Printed Photoresponsive Devices Based on Shape Memory Composites
Yang, H., Leow, W. R., Wang, T., Wang, J., Yu, J., He, K., Qi, D., Wan, C., & Chen, X. (2017) · Advanced Materials · doi:10.1002/adma.201701627 · Cited by 483
Self-citationUntethered soft robotic matter with passive control of shape morphing and propulsion
Kotikian, A., McMahan, C., Davidson, E. C., Muhammad, J. M., Weeks, R. D., Daraio, C., & Lewis, J. A. (2019) · Science Robotics · doi:10.1126/scirobotics.aax7044 · Cited by 476
Projection micro stereolithography based 3D printing and its applications
Ge, Q., Li, Z., Wang, Z., Kowsari, K., Zhang, W., He, X., Zhou, J., & Fang, N. X. (2020) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ab8d9a · Cited by 444
4D printing of polymeric materials for tissue and organ regeneration
Miao, S., Castro, N., Nowicki, M., Xia, L., Cui, H., Zhou, X., Zhu, W., Lee, S.-J., Sarkar, K., Vozzi, G., et al. (2017) · Materials Today · doi:10.1016/j.mattod.2017.06.005 · Cited by 408
3D Printing Materials for Soft Robotics
Sachyani Keneth, E., Kamyshny, A., Totaro, M., Beccai, L., & Magdassi, S. (2021) · Advanced Materials · doi:10.1002/adma.202003387 · Cited by 356
Two-Way 4D Printing: A Review on the Reversibility of 3D-Printed Shape Memory Materials
Lee, A. Y., An, J., & Chua, C. K. (2017) · Engineering · doi:10.1016/j.eng.2017.05.014 · Cited by 326
Roach, D. J., Yuan, C., Kuang, X., Li, V. C.-F., Blake, P., Romero, M. L., Hammel, I., Yu, K., & Qi, H. J. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b04401 · Cited by 319
Self-citationProgramming 2D/3D shape-shifting with hobbyist 3D printers
van Manen, T., Janbaz, S., & Zadpoor, A. A. (2017) · Materials Horizons · doi:10.1039/c7mh00269f · Cited by 321
3D printing for polymer/particle-based processing: A review
Xu, W., Jambhulkar, S., Zhu, Y., Ravichandran, D., Kakarla, M., Vernon, B., Lott, D. G., Cornella, J. L., Shefi, O., Miquelard-Garnier, G., et al. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.109102 · Cited by 318
Liquid crystal elastomers: an introduction and review of emerging technologies
Ula, S. W., Traugutt, N. A., Volpe, R. H., Patel, R. R., Yu, K., & Yakacki, C. M. (2018) · Liquid Crystals Reviews · doi:10.1080/21680396.2018.1530155 · Cited by 316
“ing methods include fused deposition modeling [143], in which a filament is laid down layer by layer to build up the printed part, and inkjet printing [138,140,144], in which droplets are jetted onto the print bed to create the part.”
MethodEvolution of 3D printed soft actuators
Zolfagharian, A., Kouzani, A. Z., Khoo, S. Y., Moghadam, A. A. A., Gibson, I., & Kaynak, A. (2016) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2016.09.028 · Cited by 314
Multifunctional magnetic soft composites: a review
Wu, S., Hu, W., Ze, Q., Sitti, M., & Zhao, R. (2020) · Multifunctional Materials · doi:10.1088/2399-7532/abcb0c · Cited by 307
Shape memory polymers for composites
Mu, T., Liu, L., Lan, X., Liu, Y., & Leng, J. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.03.018 · Cited by 302
3D printed reversible shape changing soft actuators assisted by liquid crystal elastomers
Yuan, C., Roach, D. J., Dunn, C. K., Mu, Q., Kuang, X., Yakacki, C. M., Wang, T. J., Yu, K., & Qi, H. J. (2017) · Soft Matter · doi:10.1039/c7sm00759k · Cited by 300
Self-citationAdvances in 3D/4D printing of mechanical metamaterials: From manufacturing to applications
Zhou, X., Ren, L., Song, Z., Li, G., Zhang, J., Li, B., Wu, Q., Li, W., Ren, L., & Liu, Q. (2023) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2023.110585 · Cited by 277
Ning, X., Wang, X., Zhang, Y., Yu, X., Choi, D., Zheng, N., Kim, D. S., Huang, Y., Zhang, Y., & Rogers, J. A. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201800284 · Cited by 273
Additive manufacturing of polymeric composites from material processing to structural design
Yuan, S., Li, S., Zhu, J., & Tang, Y. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.108903 · Cited by 267
Breakthrough in the printing tactics for stimuli-responsive materials: 4D printing
Rastogi, P., & Kandasubramanian, B. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.02.085 · Cited by 267
4D printing of shape memory polylactic acid (PLA)
Mehrpouya, M., Vahabi, H., Janbaz, S., Darafsheh, A., Mazur, T. R., & Ramakrishna, S. (2021) · Polymer · doi:10.1016/j.polymer.2021.124080 · Cited by 258
4D Printing for Biomedical Applications
Yarali, E., Mirzaali, M. J., Ghalayaniesfahani, A., Accardo, A., Diaz‐Payno, P. J., & Zadpoor, A. A. (2024) · Advanced Materials · doi:10.1002/adma.202402301 · Cited by 257
3D Printing of Auxetic Metamaterials with Digitally Reprogrammable Shape
Lei, M., Hong, W., Zhao, Z., Hamel, C., Chen, M., Lu, H., & Qi, H. J. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b06081 · Cited by 245
Self-citationSmart polymers and nanocomposites for 3D and 4D printing
Falahati, M., Ahmadvand, P., Safaee, S., Chang, Y.-C., Lyu, Z., Chen, R., Li, L., & Lin, Y. (2020) · Materials Today · doi:10.1016/j.mattod.2020.06.001 · Cited by 245
“b) Design for 4D printing of a multi-material trestle and its shape memory behavior including programming and recovery steps [210].”
BackgroundSoft mechanical metamaterials with unusual swelling behavior and tunable stress-strain curves
Zhang, H., Guo, X., Wu, J., Fang, D., & Zhang, Y. (2018) · Science Advances · doi:10.1126/sciadv.aar8535 · Cited by 239
Self-citationRahmatabadi, D., Ghasemi, I., Baniassadi, M., Abrinia, K., & Baghani, M. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.11.024 · Cited by 235
Peng, X., Kuang, X., Roach, D. J., Wang, Y., Hamel, C. M., Lu, C., & Qi, H. J. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2021.101911 · Cited by 238
Self-citationA review of 3D printing processes and materials for soft robotics
Yap, Y. L., Sing, S. L., & Yeong, W. Y. (2020) · Rapid Prototyping Journal · doi:10.1108/rpj-11-2019-0302 · Cited by 227
Self-expanding/shrinking structures by 4D printing
Bodaghi, M., Damanpack, A. R., & Liao, W. H. (2016) · Smart Materials and Structures · doi:10.1088/0964-1726/25/10/105034 · Cited by 225
Niu, Y., Liu, H., He, R., Li, Z., Ren, H., Gao, B., Guo, H., Genin, G. M., & Xu, F. (2020) · Materials Today · doi:10.1016/j.mattod.2020.10.004 · Cited by 224
Leist, S. K., & Zhou, J. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1198630 · Cited by 216
Novel ink for ambient condition printing of liquid crystal elastomers for 4D printing
Roach, D. J., Kuang, X., Yuan, C., Chen, K., & Qi, H. J. (2018) · Smart Materials and Structures · doi:10.1088/1361-665x/aae96f · Cited by 208
Self-citationTwo-Way and Multiple-Way Shape Memory Polymers for Soft Robotics: An Overview
Scalet, G. (2020) · Actuators · doi:10.3390/act9010010 · Cited by 209
Bifurcation-based embodied logic and autonomous actuation
Jiang, Y., Korpas, L. M., & Raney, J. R. (2019) · Nature Communications · doi:10.1038/s41467-018-08055-3 · Cited by 200
The research status and challenges of shape memory polymer-based flexible electronics
Gao, H., Li, J., Zhang, F., Liu, Y., & Leng, J. (2019) · Materials Horizons · doi:10.1039/c8mh01070f · Cited by 197
Roach, D. J., Hamel, C. M., Dunn, C. K., Johnson, M. V., Kuang, X., & Qi, H. J. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.100819 · Cited by 191
Self-citationRecent Advances in 4D Printing of Advanced Materials and Structures for Functional Applications
Wan, X., Xiao, Z., Tian, Y., Chen, M., Liu, F., Wang, D., Liu, Y., Bartolo, P. J. D. S., Yan, C., Shi, Y., et al. (2024) · Advanced Materials · doi:10.1002/adma.202312263 · Cited by 188
Self-citationAdditive manufacturing of cementitious composites: Materials, methods, potentials, and challenges
Hamidi, F., & Aslani, F. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.05.140 · Cited by 191
Progress, Challenges, and Prospects of Soft Robotics for Space Applications
Zhang, Y., Li, P., Quan, J., Li, L., Zhang, G., & Zhou, D. (2023) · Advanced Intelligent Systems · doi:10.1002/aisy.202200071 · Cited by 189
Review of 4D printing materials and their properties
Shin, D.-G., Kim, T.-H., & Kim, D.-E. (2017) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-017-0040-z · Cited by 183
3D Printing of polymer composites: A short review
Singh, S., Ramakrishna, S., & Berto, F. (2020) · Material Design & Processing Communications · doi:10.1002/mdp2.97 · Cited by 175
Leist, S. K., Gao, D., Chiou, R., & Zhou, J. (2017) · Virtual and Physical Prototyping · doi:10.1080/17452759.2017.1341815 · Cited by 173
A review on advancements in applications of fused deposition modelling process
T., S., P., S., & M.S., A. (2020) · Rapid Prototyping Journal · doi:10.1108/rpj-08-2018-0199 · Cited by 172
Technological considerations for 4D printing: An overview
Pei, E., & Loh, G. H. (2018) · Progress in Additive Manufacturing · doi:10.1007/s40964-018-0047-1 · Cited by 171
“21 Design of the trestle, cross section of the composites strips, and the 3D printed part [12]”
BackgroundThree-Dimensional Printing of Shape Memory Composites with Epoxy-Acrylate Hybrid Photopolymer
Yu, R., Yang, X., Zhang, Y., Zhao, X., Wu, X., Zhao, T., Zhao, Y., & Huang, W. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b13531 · Cited by 168
3D Printing‐Enabled Nanoparticle Alignment: A Review of Mechanisms and Applications
Xu, W., Jambhulkar, S., Ravichandran, D., Zhu, Y., Kakarla, M., Nian, Q., Azeredo, B., Chen, X., Jin, K., Vernon, B., et al. (2021) · Small · doi:10.1002/smll.202100817 · Cited by 168
Active Materials for Functional Origami
Leanza, S., Wu, S., Sun, X., Qi, H. J., & Zhao, R. R. (2024) · Advanced Materials · doi:10.1002/adma.202302066 · Cited by 169
“the printing of “digital” materials,[117, 362, 404] which combine different ratios of base printing”
BackgroundResultSelf-citationSoft network materials with isotropic negative Poisson's ratios over large strains
Liu, J., & Zhang, Y. (2018) · Soft Matter · doi:10.1039/c7sm02052j · Cited by 165
Yang, Y., Terentjev, E. M., Wei, Y., & Ji, Y. (2018) · Nature Communications · doi:10.1038/s41467-018-04257-x · Cited by 160
Machine-learning based design of active composite structures for 4D printing
Hamel, C. M., Roach, D. J., Long, K. N., Demoly, F., Dunn, M. L., & Qi, H. J. (2019) · Smart Materials and Structures · doi:10.1088/1361-665x/ab1439 · Cited by 159
Self-citationRobotic surfaces with reversible, spatiotemporal control for shape morphing and object manipulation
Liu, K., Hacker, F., & Daraio, C. (2021) · Science Robotics · doi:10.1126/scirobotics.abf5116 · Cited by 157
“Shape changes can be actuated by various mechanisms, such as shape memory effect in polymers (24, 25), swelling of hydrogels (26–28), phase transition of liquid crystal elastomers (LCEs) (29–32), anisotropy of elastomeric film (33), and heterogeneity of layered composite of architected sheets (34, 35).”
Background4D rods: 3D structures via programmable 1D composite rods
Ding, Z., Weeger, O., Qi, H. J., & Dunn, M. L. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.10.004 · Cited by 156
Self-citationDesign for Additive Manufacturing
Gibson, I., Rosen, D. W., & Stucker, B. E. (2009) · Springer eBooks · doi:10.1007/978-1-4419-1120-9_11 · Cited by 154
Hydrophilic/Hydrophobic Composite Shape-Shifting Structures
Zhao, Z., Kuang, X., Yuan, C., Qi, H. J., & Fang, D. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b02444 · Cited by 152
Self-citationComputational design for 4D printing of topology optimized multi-material active composites
Athinarayanarao, D., Prod’hon, R., Chamoret, D., Qi, H. J., Bodaghi, M., André, J., & Demoly, F. (2023) · npj Computational Materials · doi:10.1038/s41524-022-00962-w · Cited by 158
“The various classes of smart materials prominently researched include shape memory polymers 8 , shape memory alloys 9 , liquid crystal elastomers 10 – 13 and hydrogels 14,15 to name a few.”
BackgroundSelf-citationRecent advances and future challenges in printed batteries
Costa, C. M., Gonçalves, R., & Lanceros-Méndez, S. (2020) · Energy storage materials · doi:10.1016/j.ensm.2020.03.012 · Cited by 156
“[24], military [25], pharmaceuticals [26], aerospace [27], tissue engineering [28], displays [29], supercapacitors [30], battery components [31, 32] or solar cells [33].”
BackgroundMachine Learning‐Evolutionary Algorithm Enabled Design for 4D‐Printed Active Composite Structures
Sun, X., Yue, L., Yu, L., Shao, H., Peng, X., Zhou, K., Demoly, F., Zhao, R. R., & Qi, H. J. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202109805 · Cited by 150
Self-citationShape Memory Polymer Composites: 4D Printing, Smart Structures, and Applications
Yan, S., Zhang, F., Luo, L., Wang, L., Liu, Y., & Leng, J. (2023) · Research · doi:10.34133/research.0234 · Cited by 168
“Wu et al. [100] prepared a composite material by multimaterial printing using 3 materials with different T t .”
MethodReview on recent advances in 4D printing of shape memory polymers
Alshebly, Y. S., Marwan Nafea, M., Ali, M. S. M., & Almurib, H. A. F. (2021) · European Polymer Journal · doi:10.1016/j.eurpolymj.2021.110708 · Cited by 142
4D Printing: Future Insight in Additive Manufacturing
Zafar, M. Q., & Zhao, H. (2019) · Metals and Materials International · doi:10.1007/s12540-019-00441-w · Cited by 146
Active Reconfigurable Tristable Square‐Twist Origami
Wang, L., Song, W., Zhang, Y., Qu, M., Zhao, Z., Chen, M., Yang, Y., Chen, H., & Fang, D. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909087 · Cited by 123
Mahmood, A., Akram, T., Chen, H., & Chen, S. (2022) · Polymers · doi:10.3390/polym14214698 · Cited by 143
“3D (bending) [57], 2D to 3D (folding) [55], 2D to 3D (twisting) [58], 2D to 3D (surface curling), 2D to”
Zhao, W., Wang, Z., Zhang, J., Wang, X., Xu, Y., Ding, N., & Peng, Z. (2021) · Advanced Materials Technologies · doi:10.1002/admt.202001218 · Cited by 132
Programmable Deployment of Tensegrity Structures by Stimulus-Responsive Polymers
Liu, K., Wu, J., Paulino, G. H., & Qi, H. J. (2017) · Scientific Reports · doi:10.1038/s41598-017-03412-6 · Cited by 119
“Further enrichment includes, for example, using shape memory composites 22 to achieve finer control of shape change, or using materials such as hydrogels 23, 24 to design the structure to respond to different types of environmental stimuli.”
MethodSelf-citationRecent progress in shape memory polymer composites: methods, properties, applications and prospects
Lei, M., Chen, Z., Lu, H., & Yu, K. (2019) · Nanotechnology Reviews · doi:10.1515/ntrev-2019-0031 · Cited by 130
Mechanical behaviors and applications of shape memory polymer and its composites
Zhao, W. D., Li, N., Liu, L., Leng, J., & Liu, Y. (2023) · Applied Physics Reviews · doi:10.1063/5.0126892 · Cited by 128
4D polycarbonates via stereolithography as scaffolds for soft tissue repair
Weems, A. C., Arno, M. C., Wei, Y., Huckstepp, R. T. R., & Dove, A. P. (2021) · Nature Communications · doi:10.1038/s41467-021-23956-6 · Cited by 126
Hu, G. F., Damanpack, A. R., Bodaghi, M., & Liao, W. H. (2017) · Smart Materials and Structures · doi:10.1088/1361-665x/aa95ec · Cited by 119
“Wu et al [17] printed SMP composite structures in trestle, helix, insect and hook shapes.”
BackgroundDesign for Additive Manufacturing
Gibson, I., Rosen, D. W., Stucker, B. E., & Khorasani, M. (2020) · Springer eBooks · doi:10.1007/978-3-030-56127-7_19 · Cited by 139
3D-Printed Self-Folding Electronics
Sundaram, S., Kim, D. S., Baldo, M. A., Hayward, R. C., & Matusik, W. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b10443 · Cited by 123
Programmable, active lattice structures: Unifying stretch-dominated and bending-dominated topologies
Wagner, M. A., Lumpe, T. S., Chen, T., & Shea, K. (2019) · Extreme Mechanics Letters · doi:10.1016/j.eml.2019.100461 · Cited by 120
4D printing using anisotropic thermal deformation of 3D-printed thermoplastic parts
Goo, B., Hong, C.-H., & Park, K. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.108485 · Cited by 126
Mechanical Models, Structures, and Applications of Shape-Memory Polymers and Their Composites
Xin, X., Liu, L., Liu, Y., & Leng, J. (2019) · Acta Mechanica Solida Sinica · doi:10.1007/s10338-019-00103-9 · Cited by 115
“1D-to-1D and 2D deformation of the printed structure: a contraction/expansion [114]; b 1D structure bending deformation to 2D structure [115]; c 1D structure folding deformation to 2D structure [117]; d foldable hinges developed by [118]; e controllable folding structure developed by [119]”
BackgroundMethodHua, D., Zhang, X., Ji, Z., Yan, C., Yu, B., Li, Y., Wang, X., & Zhou, F. (2018) · Journal of Materials Chemistry C · doi:10.1039/c7tc05710e · Cited by 123
Reversible shape change structures by grayscale pattern 4D printing
Wu, J., Zhao, Z., Kuang, X., Hamel, C. M., Fang, D., & Qi, H. J. (2018) · Multifunctional Materials · doi:10.1088/2399-7532/aac322 · Cited by 125
Self-citationXiao, R., & Huang, W. (2020) · Macromolecular Bioscience · doi:10.1002/mabi.202000108 · Cited by 119
Additive manufacturing with stimuli-responsive materials
Boydston, A. J., Cao, B., Nelson, A., Ono, R. J., Saha, A., Schwartz, J. J., & Thrasher, C. J. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta07716a · Cited by 127
Jeong, H. Y., Woo, B. H., Kim, N., & Jun, Y. C. (2020) · Scientific Reports · doi:10.1038/s41598-020-63020-9 · Cited by 118
4D Printing: Materials, Technologies, and Future Applications in the Biomedical Field
Bajpai, A., Baigent, A., Raghav, S., Brádaigh, C. M. Ó., Koutsos, V., & Radacsi, N. (2020) · Sustainability · doi:10.3390/su122410628 · Cited by 126
“Triple-SMPs, which have two temporary forms, can achieve more complex shape-changing demands than dual-SMPs, which only deform into one temporary shape [43,56].”
BackgroundMethodZhang, J., Yin, Z., Ren, L., Liu, Q., Ren, L., Yang, X., & Zhou, X. (2022) · Advanced Materials Technologies · doi:10.1002/admt.202101568 · Cited by 123
Yang, C., Wang, B., Li, D., & Tian, X. (2017) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1265992 · Cited by 111
Review of 4D printing materials and reinforced composites: Behaviors, applications and challenges
Alshahrani, H. (2021) · Journal of Science Advanced Materials and Devices · doi:10.1016/j.jsamd.2021.03.006 · Cited by 134
Singh, G., Singh, S., Prakash, C., Kumar, R., Kumar, R., & Ramakrishna, S. (2020) · Polymer Composites · doi:10.1002/pc.25683 · Cited by 111
Tang, Z., Gao, Z., Jia, S., Wang, F., & Wang, Y. (2017) · Advanced Science · doi:10.1002/advs.201600437 · Cited by 105
Additive Manufacturing of Epoxy Resins: Materials, Methods, and Latest Trends
Peerzada, M. H., Abbasi, S. A., Lau, K.-T., & Hameed, N. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b06870 · Cited by 110
4D Printed Multifunctional Composites with Cooling‐Rate Mediated Tunable Shape Morphing
Roach, D. J., Sun, X., Peng, X., Demoly, F., Zhou, K., & Qi, H. J. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202203236 · Cited by 102
Self-citationPlant leaf-mimetic smart wind turbine blades by 4D printing
Momeni, F., Sabzpoushan, S., Valizadeh, R., Morad, M. R., Liu, X., & Ni, J. (2018) · Renewable Energy · doi:10.1016/j.renene.2018.05.095 · Cited by 98
Hierarchically self-morphing structure through 4D printing
Teoh, J. E. M., An, J., Chua, C. K., Lv, M. Y., Krishnasamy, V., & Liu, Y. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1272174 · Cited by 98
Reactive 3D Printing of Shape-Programmable Liquid Crystal Elastomer Actuators
Barnes, M., Sajadi, S. M., Parekh, S., Rahman, M. M., Ajayan, P. M., & Verduzco, R. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c07331 · Cited by 104
Metadata
- Authors
- Wu, J., Yuan, C., Ding, Z., Isakov, M., Mao, Y., Wang, T., Dunn, M. L., & Qi, H. J.
- Affiliations
- Georgia Institute of Technology (US)
- Xi'an Jiaotong University (CN)
- Singapore University of Technology and Design (SG)
- Corresponding author
- Dunn, Martin L.
- Qi, H. Jerry
- Venue
- Scientific Reports
- Published
- 2016-04-13
- Volume
- 6
- Issue
- 1
- Pages
- 24224-24224
- ISSN
- 2045-2322 (ISSN-L)
- PMC
- PMC4829848
- OpenAlex
- W2336992486
- Cited by
- 399
- References
- 31
- Citations by year
- 2026: 12 · 2025: 23 · 2024: 39 · 2023: 37 · 2022: 43 · 2021: 55 · 2020: 57 · 2019: 49 · 2018: 39 · 2017: 36 · 2016: 8
- FWCI
- 39.13
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- cc-by
- creativecommons.org/licenses/by/4.0 (tdm)
- creativecommons.org/licenses/by/4.0 (vor)
- Locations
- Scientific Reports (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- Funders
- National Science Foundation (1462895, 1462894, 1404621)
- National Research Foundation
- National Research Foundation Singapore
- Singapore University of Technology and Design
- Digital Manufacturing and Design Centre, Singapore University of Technology and Design
- Division of Civil, Mechanical and Manufacturing Innovation (CMMI-1462895, CMMI-1462894, 1462894, 1462895)
- Air Force Office of Scientific Research (FA9550-13-1-0088, FA9550-)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer composites and self-healing
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Keywords
- shape memory polymers, 4D printing, active composites, glass transition temperature, fiber volume fraction, bending deformation, folding and unfolding, deformation modeling, composite laminates
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.