Multi-shape active composites by 3D printing of digital shape memory polymers
Open accessThe DOI matches its Crossref record; 30 of the 31 references it cites were found in a registry or an index.
Abstract
Recent research using 3D printing to create active structures has added an exciting new dimension to 3D printing technology. After being printed, these active, often composite, materials can change their shape over time; this has been termed as 4D printing. In this paper, we demonstrate the design and manufacture of active composites that can take multiple shapes, depending on the environmental temperature. This is achieved by 3D printing layered composite structures with multiple families of shape memory polymer (SMP) fibers – digital SMPs - with different glass transition temperatures (Tg) to control the transformation of the structure. After a simple single-step thermomechanical programming process, the fiber families can be sequentially activated to bend when the temperature is increased. By tuning the volume fraction of the fibers, bending deformation can be controlled. We develop a theoretical model to predict the deformation behavior for better understanding the phenomena and aiding the design. We also design and print several flat 2D structures that can be programmed to fold and open themselves when subjected to heat. With the advantages of an easy fabrication process and the controllable multi-shape memory effect, the printed SMP composites have a great potential in 4D printing applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures










Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“the first example of 3D printed multiple-way SMPs was provided by Wu et al. [206], who fabricated layered composite structures with SMPs having different glass transition temperatures, by using a multi-material Polyjet 3D printer.”
From Two-Way and Multiple-Way Shape Memory Polymers for Soft Robotics: An Overview (2020) · cites this paper as [206]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Inkjet Printing—Process and Its Applications
Singh, M., Haverinen, H. M., Dhagat, P., & Jabbour, G. E. (2010) · Advanced Materials · doi:10.1002/adma.200901141 · Cited by 2,375 · cited 1×
“Active materials and structures that can change their properties and shape have great technological potential, e.g., in sensors, robotics, self-packaging devices, aerospace exploring and bio-medical applications 15–18 .”
Light-induced shape-memory polymers
Lendlein, A., Jiang, H., Jünger, O., & Langer, R. (2005) · Nature · doi:10.1038/nature03496 · Cited by 2,006 · cited 1×
“Among active materials, shape memory polymers (SMPs) have been intensively studied because of their ability to generate a large shape change under an external stimuli us, such as temperature 19–21 , light 22 , electric 23,24 and magnetic fields 25,26 .”
Review of progress in shape-memory polymers
Liu, C., Qin, H., & Mather, P. T. (2007) · Journal of Materials Chemistry · doi:10.1039/b615954k · Cited by 1,942
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M. (2014) · Analytical Chemistry · doi:10.1021/ac403397r · Cited by 1,746 · cited 1×
“1038/srep24224 λ α = + − < < t T t T t t ( ) 1 [ ( ) ], 0 , (2) Thermal H 1”
Shape-memory polymers and their composites: stimulus methods and applications
Leng, J., Lan, X., Liu, Y., & Du, S. (2011) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.03.001 · Cited by 1,495 · cited 1×
“Active materials and structures that can change their properties and shape have great technological potential, e.g., in sensors, robotics, self-packaging devices, aerospace exploring and bio-medical applications 15–18 .”
A review on 3D micro-additive manufacturing technologies
Vaezi, M., Seitz, H., & Yang, S. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4605-2 · Cited by 1,293 · cited 1×
“e y t t t t y t t t ( , ) ln ( ) ( ) ( ) , (6) Thermal b 0 2 3”
Recent advances in polymer shape memory
Xie, T. (2011) · Polymer · doi:10.1016/j.polymer.2011.08.003 · Cited by 870
3D printing of composite calcium phosphate and collagen scaffolds for bone regeneration
Inzana, J. A., Olvera, D., Fuller, S. M., Kelly, J. P., Graeve, O. A., Schwarz, E. M., Kates, S. L., & Awad, H. A. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.01.064 · Cited by 840 · cited 1×
“λ λ = ∆ y t y t y t ( , ) ( , ) ( , ), (7) Mech Thermal 0”
Mohr, R., Kratz, K., Weigel, T., Lucka-Gabor, M., Moneke, M., & Lendlein, A. (2006) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0600079103 · Cited by 819 · cited 1×
“Among active materials, shape memory polymers (SMPs) have been intensively studied because of their ability to generate a large shape change under an external stimuli us, such as temperature 19–21 , light 22 , electric 23,24 and magnetic fields 25,26 .”
Research works printed but not linked: 1
- Tibbits, S. The emergence of “4D printing”. TED conference. (2013) Available at: http://www.ted.com/talks/skylar_tibbits_the_emergence_of_4d_printing?language=en (Accessed: 25th July 2013).
Cited by
Items 301–399 of 399
Kernin, A., Ventura, L., Soul, A., Chen, K., Wan, K., Lu, W., Steiner, P., Kocabaş, C., Papageorgiou, D. G., Goutianos, S., et al. (2022) · Materials & Design · doi:10.1016/j.matdes.2022.111335 · Cited by 7
Development of shape memory polymers micro/nanofiber membranes in biomedical applications
Zheng, W., Wang, Y., Zhang, F., ChunYan, L. I., Liu, Y., & Leng, J. (2018) · Scientia Sinica Technologica · doi:10.1360/n092018-00126 · Cited by 7
Induced Birefringence in 3D Printing: Concealing Information Optically within Printed Objects
Roper, D. M., Kwon, K., Malone, L. P., Best, S. M., & Cameron, R. E. (2022) · Advanced Materials Technologies · doi:10.1002/admt.202200139 · Cited by 6
Matta, C., Tawk, C., & Rahmé, P. (2024) · Smart materials & methods. · doi:10.1080/29963176.2024.2419860 · Cited by 9
4D printing technology, modern era: A short review
Mostakim, K., Masuk, N. I., Hasan, M. R., & Islam, M. S. (2020) · International Journal of Energy Technology · doi:10.32438//ijet.203015 · Cited by 8
Three-dimensional printing of continuous carbon fiber-reinforced shape memory polymer composites
An, Y., & Yu, W.-R. (2019) · AIP conference proceedings · doi:10.1063/1.5112513 · Cited by 6
Recent Advances of Novel Materials for 3D / 4D Printing in Biomedical Applications
Ahmed, J. (2018) · Wiley eBooks · doi:10.1002/9783527813704.ch10 · Cited by 14
Soltanzadeh, R., Afsharipour, E., Anssari, N., Mansouri, B., & Shafai, C. (2020) · Journal of 3D Printing in Medicine · doi:10.2217/3dp-2019-0020 · Cited by 5
New modeling approach for 4D printing by using kinetic components
Choi, W., Kim, D., Lee, S., & Lee, Y. (2021) · Journal of Computational Design and Engineering · doi:10.1093/jcde/qwab029 · Cited by 8
“If the part is physically isolated based on the activity, we can denote each element to be active or passive (Ge et al., 2014; Peraza-Hernandez et al., 2014; Raviv et al., 2014; Deng & Chen, 2015; Yu et al., 2015; Wu et al., 2016).”
BackgroundChen, H. M., Li, X. P., Chen, J., He, X., Huang, W., Zhu, K., Yu, W. H., Ni, H. L., Zhao, K., & Hu, P. (2021) · Journal of Polymer Research · doi:10.1007/s10965-021-02561-7 · Cited by 5
“This approach provides an alternative way for additive manufacturing (3D printing) of digital shape memory polymers [13, 14].”
BackgroundIntroduction to 4D Printing: Concepts and Material Systems
Kuang, X., Yue, L., & Qi, H. J. (2023) · Wiley eBooks · doi:10.1002/9783527833931.ch1 · Cited by 11
Self-citationAli, N. B., Alshahrani, H., & de Barros, S. (2025) · Colloid & Polymer Science · doi:10.1007/s00396-025-05499-0 · Cited by 4
“For example, Guo-qiang et al. [30] investigated the impact of design parameters on the closing efficiencies of SMP-based synaptic foam, while Wu et al. [31] explored the shape memory behavior of 3D-printed SMP composites activated at various temperatures in water.”
3D printed actuators: reversibility, relaxation and ratcheting
Zhao, S., Maas, M., Jansen, K. M. B., & Hecke, M. L. V. (2019) · Leiden Repository (Leiden University) · Cited by 4
Suryavanshi, P., Lekurwale, S., Kumar, P., Dwivedy, S. K., & Banerjee, S. (2025) · Rapid Prototyping Journal · doi:10.1108/rpj-07-2024-0295 · Cited by 4
Wang, Y., Liang, W., Cai, W., Zhang, J., Guo, W., Qi, B., Zhang, H., Lu, H., & Ding, Z. (2025) · Engineering Structures · doi:10.1016/j.engstruct.2025.120459 · Cited by 4
Self-citationMaterials for four-dimensional printing
Shi, Y., Yan, C., Zhou, Y., Wu, J., Wang, Y., Yu, S., & Chen, Y. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-819302-0.00008-0 · Cited by 4
Self-citationA brief review on mechanical designs for 4D printing
Wang, L., Zhang, Q., Zhao, Z., Song, W., & Fang, D. (2022) · Smart Manufacturing · doi:10.1142/s2737549822300012 · Cited by 4
Physical Logic Bombs in 3D Printers via Emerging 4D Techniques
Le, T. D., Etigowni, S., Liang, S., Peng, X., Qi, H. J., Javanmard, M., Zonouz, S., & Beyah, R. (2021) · Annual Computer Security Applications Conference · doi:10.1145/3485832.3485880 · Cited by 5
“The emerging 4D printing has been studied in recent work [13, 17, 22, 26, 33, 39, 52, 58], and shown to be applicable in biomedical applications such as tissue engineering, drug delivery, and miniature surgery tools [18, 30, 46].”
BackgroundSelf-citationNezhad, I. S., Golzar, M., Behravesh, A. H., & Zare, S. (2021) · Research Square · doi:10.21203/rs.3.rs-791407/v1 · Cited by 4
Process design and grasping performance of 4D-printed biomimetic curling soft actuators
Qian, Z., Huang, S. T., Zhang, H., Zhang, Y., Sheng, J., Zhang, J., Agyenim-Boateng, E., & Zhu, M. (2025) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2025.08.069 · Cited by 3
Mechanics guided design of programmable bilayer for aortic valve stent
Yang, M., Yuan, C., Guo, H., Jiang, X., & Wang, T. (2024) · Extreme Mechanics Letters · doi:10.1016/j.eml.2024.102229 · Cited by 4
Self-citationPelliccia, G., Bianconi, F., Filippucci, M., & Correa, D. (2024) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2023.0337 · Cited by 3
“21 There are two notable exceptions: fi rst, Sahin et al. 22 developed a cross-sectional 4D-printed (CS4DP) methodology by tailoring the mechanical and hygroscopic properties across the depth of bilayers structures by rotating the printing axis of the bilayers before actuation.”
InfluentialHassan, R. U., Jo, S., & Seok, J. (2018) · Functional Materials Letters · doi:10.1142/s1793604718500315 · Cited by 3
Yi, H. (2023) · Civil Engineering and Architecture · doi:10.13189/cea.2023.110221 · Cited by 3
Additive Manufacturing for Complex Geometries in Polymer Composites
López‐Barroso, J., Flores‐Hernandez, C. G., Martínez‐Hernández, A. L., Martínez‐Barrera, G., & Velasco‐Santos, C. (2023) · Advances in material research and technology · doi:10.1007/978-3-031-42731-2_5 · Cited by 3
Vat photopolymerization 3D printing of stimuli-responsive polymer
Zhai, F., & Ji, Z. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-15487-4.00015-7 · Cited by 3
Folding and assembly methods for forming three-dimensional mesostructures
Fan, Z., Zhang, F., & Zhang, Y. (2018) · Chinese Science Bulletin (Chinese Version) · doi:10.1360/n972018-00396 · Cited by 2
Application of Thermoplastic Polymers in 4D Printing
Piyush, P., Kumar, R., Singh, R., & Kumar, R. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-820352-1.00011-0 · Cited by 5
4D Printing Using Multifunctional Polymeric Materials: A Review
González-Henríquez, C. M., Rodríguez-Umanzor, F. E., Sarabia‐Vallejos, M. A., & Rodríguez‐Hernández, J. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-820352-1.00168-1 · Cited by 3
4D-printed self-forming monofilament structures in material extrusion additive manufacturing
Zhang, J., He, R., Baxevanakis, K. P., & Gleadall, A. (2025) · Rapid Prototyping Journal · doi:10.1108/rpj-07-2024-0287 · Cited by 2
Multifunctional and Reprogrammable Magnetoactive Graphene Oxide Origami
Cai, J. H., Chen, Y., Seyedkanani, A., Shen, G., Cerruti, M., & Akbarzadeh, A. (2025) · Advanced Science · doi:10.1002/advs.202514597 · Cited by 8
Thermomechanical Properties of Polyjet Voxel-Printed Parts and the Effect of Percolation
Ho, C., Bao, J., & Xu, J. (2023) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2023.0126 · Cited by 5
Liu, Y., Yang, B., Song, C., Zhao, Q., Xie, T., Fang, Z., & Wu, J. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c14140 · Cited by 5
Self-citation4D-printed composite actuators
Delbart, R., Roumy, L., Harcourt, M., Robert, C., Touchard, F., Truong-Hoang, T. Q., & Martínez-Hergueta, F. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-15917-6.00005-0 · Cited by 2
Additive manufacturing of shape memory polymers
Mehrpouya, M., Ding, Z., & Huang, W. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-29594-2.00002-x · Cited by 4
Self-citationDesign and realization of multiunit functional primitives based on 4D printing
Zeng, S.-Y., Wang, Y., Zheng, H., Gao, Y., Wang, L., & Tan, J. (2025) · Advances in Manufacturing · doi:10.1007/s40436-025-00551-2 · Cited by 2
SFEM-4DP: A strain-based finite element model for 4D printing
Liu, Z., Zhe, Q. I. U., Tian, Y., Ma, S., Furukawa, H., Hirai, S., & Wang, Z. (2025) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2025.110497 · Cited by 2
Polymer nanocomposites in additive manufacturing processes for typical applications in the industry
González-Henríquez, C. M., Sarabia‐Vallejos, M. A., & Rodríguez‐Hernández, J. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-821497-8.00024-1 · Cited by 3
Curvature arising in shape memory polymer sheets via light absorption
MORIMOTO, T., ASHIDA, F., Inoue, N., & Hayashi, R. (2022) · Acta Mechanica · doi:10.1007/s00707-022-03400-6 · Cited by 2
“Moreover, this strategic approach has only been induced in submerged environments since most reports use hydrogels as active material, with a few exceptions using liquid crystal elastomer (LCE) [17–21] and shape memory polymer (SMP) [15,22,23].”
BackgroundFlexible and Stretchable Three-Dimensional (3D) Devices
Lee, S. E., Kim, S., & Kim, B. H. (2022) · Journal of Flexible and Printed Electronics · doi:10.56767/jfpe.2022.1.1.1 · Cited by 2
“이러한 제조 공정들을 활용 하면 복잡한 3차원 구조를 손쉽게 제작할 수 있기 때 문에, 새로운 폼팩터(form factor)를 기반으로 향상된 성능 및 다양한 응용 분야를 갖는 유연 및 신축 소자를 제조할 수 있다[8-15].”
Flexible Gripper Manufacturing and Simulation Based on 3D Printing
Tong, A., Hu, J., Zhang, M., Jin, Y. Q., & Du, J. (2019) · Symposium on Piezoelectricity, Acoustic Waves and Device Applications · doi:10.1109/spawda.2019.8681858 · Cited by 2
“With the introduction of 3D printing, SMPs become more exquisite [9,10].”
Programming 4D Printed Parts Through Shape-Memory Polymers and Computer-Aided-Design
Pei, E., Loh, G. H., Nam, S. W., & Azhar, F. E. (2019) · Lecture notes in mechanical engineering · doi:10.1007/978-3-030-29041-2_19 · Cited by 4
Multi-materials/hybrid composite 4D printing
Kandi, R., & Colangelo, F. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-21518-6.00005-3 · Cited by 1
Inverse design of thermally active composite via policy-transferred reinforcement learning
Lee, S., Kang, S., Nam, J., Yu, J. S., Kim, M., & Ryu, S. (2026) · Materials Horizons · doi:10.1039/d6mh00239k · Cited by 1
Yang, B., Zhu, A., Li, Y., Gao, M., Gao, X., Sun, J., Liu, X., & Gu, Z. (2026) · Materials Horizons · doi:10.1039/d6mh00770h · Cited by 1
Wang, G., Dong, M., Shen, J., Zhang, X., Du, M., Li, D., Li, K., Zhang, X., & Chen, J. (2026) · Materials · doi:10.3390/ma19183869 · Cited by 1
“Building on Ge’s research, Wu further advanced the use of polymer jetting technology to achieve 4D printing of multi-directionally deformable composite materials based on SMPs [114].”
Sreenivasulu, R. (2021) · GAZI UNIVERSITY JOURNAL OF SCIENCE · doi:10.35378/gujs.906652 · Cited by 3
4D Printing Materials for Soft Robots
Lee, S. (2022) · Fashion & Textile Research Journal · doi:10.5805/sfti.2022.24.6.667 · Cited by 1
Nano-frictional mechano-reinforcing porous nanowires scaffolds
Hua, L., Hu, C., Zhang, J., Li, J., Gu, C., Huang, B., Li, G., Du, J., & Guo, W. (2023) · Friction · doi:10.1007/s40544-023-0815-x · Cited by 3
“Various multistimuli-responsive materials such as carbon nanotubes with polyurethane, copolymerized 2-methoxyethyl acrylate, and N-methylol acrylamide have been explored for medicinal applications [10 ‒ 13].”
Composite additive manufacturing: An overview of current state, limitations, and progress
Islam, A., & Rahman, M. Z. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-96020-5.00229-6 · Cited by 1
Smart functional and shape memory materials
Guo, R., Xu, X., Ji, Z., Lyu, Y., Lin, Z., & Wang, X. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-18462-8.00003-9 · Cited by 1
Jirandehi, K. P., Aghchai, A. J., Haghighi, S. E., & Jandaghi, S. H. S. S. (2024) · Australian Journal of Mechanical Engineering · doi:10.1080/14484846.2024.2424052 · Cited by 1
“Other methods include stereolitho-graphy (Ge et al. 2016; Wu et al. 2016), SLS (Yang et al. 2016), and FFF (Langelaar 2016; Vanek, Galicia, and Benes 2014).”
Optimization Design of Smart Reversible Diaphragms Using Shape Memory Polymer
Yang, Q., Tao, R., & Wen, P. (2017) · Springer eBooks · doi:10.1007/978-3-319-67988-4_42 · Cited by 1
Wave Propagation And Regulation In Periodic Structure Based On 4D-Printing
Ting-ting, L. I. N., Hu, J., Zhu, Z., Jin, Y. Q., & Du, J. (2019) · Symposium on Piezoelectricity, Acoustic Waves and Device Applications · doi:10.1109/spawda.2019.8681783 · Cited by 1
“Upon heating, the SMP material gains the ability to deform due to shape memory behavior of the matrix [16].”
Background4D printing for product development: State of the art and future scope
Singh, S., & Mali, H. S. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-86011-6.00002-7 · Cited by 1
Integrated multi-media platform for hybrid 3D printing
Dunn, C. K. (2017) · SMARTech Repository (Georgia Institute of Technology) · Cited by 1
4D Printing as a New Paradigm for Advanced Manufacturing
Momeni, F. (2018) · Deep Blue (University of Michigan) · Cited by 3
Multifunctional Polymer Composites: Self-Healing, Shape Memory, 3D Printing, and Flame Retardancy
Feng, X., & Li, G. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-820352-1.00169-3 · Cited by 1
Three-Dimensional Printing of Sustainable Polymer for Motion Programming Applications
Niazy, D., Elsabbagh, A., & Ismail, M. R. (2022) · Encyclopedia of Green Materials · doi:10.1007/978-981-16-4921-9_231-1 · Cited by 1
4D printing of polymer-based smart structures by thermal activation
Teoh, J. E. M. (2018) · DR-NTU (Nanyang Technological University) · doi:10.32657/10356/74351
“The same materials were also used in a recent research [78].”
MethodReversible 4D-printing of shape memory polymers using heat and ethanol swelling
Lee, A. Y. (2020) · DR-NTU (Nanyang Technological University) · doi:10.32657/10356/145238
Stimuli responsive graphene-based materials
Kausar, A. (2021) · Elsevier eBooks · doi:10.1016/b978-0-323-90937-2.00003-4
On 3D printed multiblended and hybrid-blended poly(lactic)acid composite matrix for self-assembly
Kumar, S., Singh, R., Singh, T. P., & Batish, A. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-823725-0.00003-5 · Cited by 1
Fink, J. K. (2018) · Wiley eBooks · doi:10.1002/9781119555308.ch2
Materiales compuestos y la tecnología de impresión 3D en la producción de materiales inteligentes
de México, U. A. D. E., Garduño-Jaimes, I. Z., Martínez‐Barrera, G., de México, U. A. D. E., Vigueras‐Santiago, E., de México, U. A. D. E., Cruz-Olivares, J., & de México, U. A. D. E. (2022) · doi:10.3926/oms.409.03
Potential of Bio-Inspiration in 3- and 4-D Printing
(2020) · Advances in chemical and materials engineering book series · doi:10.4018/978-1-7998-1647-8.ch009
4D-printed low-voltage electroactive polymers modeling and fabrication
Luo, B., Zhu, Z., Xu, X., & Bian, C. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-824082-3.00029-5
Hierarchical motion of 4D-printed structures using the temperature memory effect
Scalet, G., Pandini, S., Inverardi, N., & Auricchio, F. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-95430-3.00010-5
Design Freedoms of Lattice Structures for Interlock Bonding
Freund, R., Sallach, F. M., & Vietor, T. (2023) · Zukunftstechnologien für den multifunktionalen Leichtbau · doi:10.1007/978-3-658-39928-3_12
Study on the deformation capacity of multi-material 4D-printed LCE actuators
Tong, Y., Xiao, X., Liu, T., Wang, N., & Liao, W. (2022) · Smart Manufacturing · doi:10.1142/s273754982240004x
Shape memory polymers: mechanism, structure, and properties
Kausar, A. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-18504-5.00015-4
Shape memory polystyrene and trans-1,4-polyisoprene-derived nanocomposites
Kausar, A. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-18504-5.00006-3
Shape memory polymer–based nanocomposites
Kausar, A. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-18504-5.00009-9
Versatile shape memory nanocomposites: technological platform for biomedical applications
Kausar, A., & Ahmad, I. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-18504-5.00011-7 · Cited by 1
In-space manufacturing of morphing electronics
Little, I., Tran, A., & Deng, Z. (2024) · Active and Passive Smart Structures and Integrated Systems · doi:10.1117/12.3009988
“For example, SMPs coated with commercial carbon inks 22,23 or polydopamine films 4 have been engineered to generate localized heat upon exposure to infrared laser or visible light, resulting in light-driven SMPs. Additionally, embedding electrodes into the SMP structure or incorporating…”
MethodShape-memory polymer/nanodiamond nanocomposites: Design and functioning
Kausar, A. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-15908-4.00003-2
4D printing of molded interconnect device
Park, K. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-13673-3.00011-0
Fundamentals of Four-Dimensional (4D) Printing
(2024) · Advances in chemical and materials engineering book series · doi:10.4018/978-1-6684-5638-5.ch001
Impact of Shape Transformation of Programmable 3D Structures on UV Print Quality
Pivar, M., & Muck, D. (2024) · Polymers · doi:10.3390/polym16192685
“While many applications of 4D printing focus on creating origami structures [6,15–17] or simple everyday objects, such as phone stands and cases [2,8], an intriguing possibility lies in adding “new dimensions” through overprinting.”
BackgroundSimulation of 4D Printing of a Thermally Sensitive Memory Material
Murthy, H. R., & Koteshwara, M. (2024) · Springer Proceedings in Materials · doi:10.1007/978-981-97-5959-0_24
Graphene-Based Morphing Skin: Harnessing Thermomechanical Properties for Aerodynamic Efficiency
Abouzoul, W., Tayane, S., Ennaji, M., & Gaber, J. (2024) · World Conference on Complex Systems · doi:10.1109/wccs62745.2024.10765524
Three-Dimensional Printing of Sustainable Polymer for Motion Programming Applications
Niazy, D., Elsabbagh, A., & Ismail, M. R. (2024) · Encyclopedia of Green Materials · doi:10.1007/978-981-97-4618-7_231
Performance- and function-oriented innovative structures
Tian, X., Liu, T., Hou, Z., & Wu, L. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-13599-6.00005-0
Additive manufacturing of morphing structures with multi-stimuli activation capabilities
Little, I., Tran, A., Keller, A., Zuzelski, M., McKibben, N., Messerli-Wallace, J., & Deng, Z. (2025) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x251386918
“For instance, thermally-driven SMPs coated with commercial carbon inks (Liu et al., 2012; Wu et al., 2016) or polydopamine films (Li et al., 2016) can generate localized heat when exposed to infrared laser or visible light, transforming them into light-responsive SMPs. Additionally, embedding…”
Fundamentals of 4D Printing Technology
Anandharamakrishnan, C., Moses, J. A., & Santhoshkumar, P. (2025) · Wiley eBooks · doi:10.1002/9781394305285.ch4
Xia, Y., Xia, Y., Xia, C., & Wang, Z. (2026) · IEEE International Conference on Micro Electro Mechanical Systems (MEMS) · doi:10.1109/mems64181.2026.11419486
Origami-based design for 4D printing of deployable structures
Jian, B. (2020) · theses.fr (ABES) · doi:10.70675/ac6c8038z75e2z4e26za263zab1f5382ee42 · Cited by 3
Knowledge formalization and recommendation in computational design synthesis for 4D printing
Dimassi, S. (2022) · theses.fr (ABES) · doi:10.70675/9be2f166z146dz4882zbf00z1511ec972047 · Cited by 2
A novel approach to fabricate bioinspired programmable composite materials : the 3D Printing way
Lantean, S. (2021) · theses.fr (ABES) · doi:10.70675/6996d483z854fz41a8za7b3zc82e74574854 · Cited by 2
Hybrid voxels 4D printing based on topologically interlocked multi-material assembly
Benyahia, K. (2023) · theses.fr (ABES) · doi:10.70675/6091d5c4z9f92z44c5z8847zc6267319fcb2 · Cited by 1
Ma, G.-H., Jiang, Z.-X., Li, L.-X., & Liu, T.-W. (2026) · Composite Structures · doi:10.1016/j.compstruct.2026.120462
Mechanical anisotropy of 3D-printed digital materials at large strains
Lee, S., Lee, G., Yun, S., Lee, S., Lee, J., & Cho, H. (2026) · Soft Matter · doi:10.1039/d6sm00036c · Cited by 2
“In parallel, the deformation and failure of these digital materials have been characterized through mechanical testing (Wu et al. 2016; Akbari et al. 2019; Zorzetto et al. 2020; Abu-Qbeitah et al. 2025) and continuum-based constitutive modeling (Slesarenko and Rudykh 2018; Xiang et al. 2019; Lee et…”
Kim, J. B., Martinez, A. P., Hong, Y., Zhang, Z., Wang, K., & Yang, S. M. (2026) · Advanced Materials · doi:10.1002/adma.73794 · Cited by 1
“…through ground-contacting sheets, rods, or fibers actuated by an electromagnetic field-induced Lorentz force on charged particles [5], electrostatic pressure applied to dielectric elastomer actuators (DEAs) under ultrahigh voltage [6], or thermomechanical deformation of shape memory polymers [7].”
A Programmable Bilayer Shape Memory Polymer Composite for Soft Bending Actuators
He, Y., & Wang, J. (2026) · Mechanisms and machine science · doi:10.1007/978-3-032-11165-4_11
Underwater Grippers for Dexterous Manipulation: A Review on Design and Enabling Technologies
Yang, C., Xing, Z., Lin, M., Lin, R., Zhang, S., Wu, X., & Zhang, Y. (2026) · Journal of Field Robotics · doi:10.1002/rob.70277
Shaping Liquid Crystal Rubbers by Chemical Potential Gradient
Arachchige, M. K., Siddiquee, Z., Dharmarathna, R., & Jákli, A. I. (2026) · Macromolecular Rapid Communications · doi:10.1002/marc.70418
Dewangan, K. (2026) · Journal of Thermoplastic Composite Materials · doi:10.1177/08927057261481036
Shaqour, B., Berthé, V., & González-Gutiérrez, J. (2026) · Applied Sciences · doi:10.3390/app16199632
Metadata
- Authors
- Wu, J., Yuan, C., Ding, Z., Isakov, M., Mao, Y., Wang, T., Dunn, M. L., & Qi, H. J.
- Affiliations
- Georgia Institute of Technology (US)
- Xi'an Jiaotong University (CN)
- Singapore University of Technology and Design (SG)
- Corresponding author
- Dunn, Martin L.
- Qi, H. Jerry
- Venue
- Scientific Reports
- Published
- 2016-04-13
- Volume
- 6
- Issue
- 1
- Pages
- 24224-24224
- ISSN
- 2045-2322 (ISSN-L)
- PMC
- PMC4829848
- OpenAlex
- W2336992486
- Cited by
- 399
- References
- 31
- Citations by year
- 2026: 12 · 2025: 23 · 2024: 39 · 2023: 37 · 2022: 43 · 2021: 55 · 2020: 57 · 2019: 49 · 2018: 39 · 2017: 36 · 2016: 8
- FWCI
- 39.13
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- cc-by
- creativecommons.org/licenses/by/4.0 (tdm)
- creativecommons.org/licenses/by/4.0 (vor)
- Locations
- Scientific Reports (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- Funders
- National Science Foundation (1462895, 1462894, 1404621)
- National Research Foundation
- National Research Foundation Singapore
- Singapore University of Technology and Design
- Digital Manufacturing and Design Centre, Singapore University of Technology and Design
- Division of Civil, Mechanical and Manufacturing Innovation (CMMI-1462895, CMMI-1462894, 1462894, 1462895)
- Air Force Office of Scientific Research (FA9550-13-1-0088, FA9550-)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer composites and self-healing
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Keywords
- shape memory polymers, 4D printing, active composites, glass transition temperature, fiber volume fraction, bending deformation, folding and unfolding, deformation modeling, composite laminates
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.