The DOI matches its Crossref record; 79 of the 79 references it cites were found in a registry or an index.
Evaluating metal–organic frameworks for post-combustion carbon dioxide capture via temperature swing adsorption
Abstract
Two representative metal–organic frameworks, Zn4O(BTB)2 (BTB3− = 1,3,5-benzenetribenzoate; MOF-177) and Mg2(dobdc) (dobdc4− = 1,4-dioxido-2,5-benzenedicarboxylate; Mg-MOF-74, CPO-27-Mg), are evaluated in detail for their potential use in post-combustion CO2 capture via temperature swing adsorption (TSA). Low-pressure single-component CO2 and N2 adsorption isotherms were measured every 10 °C from 20 to 200 °C, allowing the performance of each material to be analyzed precisely. In order to gain a more complete understanding of the separation phenomena and the thermodynamics of CO2 adsorption, the isotherms were analyzed using a variety of methods. With regard to the isosteric heat of CO2 adsorption, Mg2(dobdc) exhibits an abrupt drop at loadings approaching the saturation of the Mg2+ sites, which has significant implications for regeneration in different industrial applications. The CO2/N2 selectivities were calculated using ideal adsorbed solution theory (IAST) for MOF-177, Mg2(dobdc), and zeolite NaX, and working capacities were estimated using a simplified TSA model. Significantly, MOF-177 fails to exhibit a positive working capacity even at regeneration temperatures as high as 200 °C, while Mg2(dobdc) reaches a working capacity of 17.6 wt % at this temperature. Breakthrough simulations were also performed for the three materials, demonstrating the superior performance of Mg2(dobdc) over MOF-177 and zeolite NaX. These results show that the presence of strong CO2 adsorption sites is essential for a metal–organic framework to be of utility in post-combustion CO2 capture via a TSA process, and present a methodology for the evaluation of new metal–organic frameworks via analysis of single-component gas adsorption isotherms.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Functional Porous Coordination Polymers
Kitagawa, S., Kitaura, R., & Noro, S. (2004) · Angewandte Chemie International Edition · doi:10.1002/anie.200300610 · Cited by 11,071
Selective gas adsorption and separation in metal–organic frameworks
Li, J.-R., Kuppler, R. J., & Zhou, H.-C. (2009) · Chemical Society Reviews · doi:10.1039/b802426j · Cited by 8,932
Eddaoudi, M., Kim, J., Rosi, N., Vodak, D., Wachter, J., O'Keeffe, M., & Yaghi, O. M. (2002) · Science · doi:10.1126/science.1067208 · Cited by 8,132
Hybrid porous solids: past, present, future
Férey, G. (2008) · Chem. Soc. Rev. · doi:10.1039/b618320b · Cited by 5,822
Hydrogen storage in metal–organic frameworks
Murray, L. J., Dincă, M., & Long, J. R. (2009) · Chemical Society Reviews · doi:10.1039/b802256a · Cited by 4,532
Self-citationAmine Scrubbing for CO 2 Capture
Rochelle, G. T. (2009) · Science · doi:10.1126/science.1176731 · Cited by 4,440
Carbon Dioxide Capture: Prospects for New Materials
D'Alessandro, D. M., Smit, B., & Long, J. R. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201000431 · Cited by 4,046
Self-citationThermodynamics of mixed‐gas adsorption
Myers, A. L., & Prausnitz, J. M. (1965) · AIChE Journal · doi:10.1002/aic.690110125 · Cited by 3,775
Millward, A. R., & Yaghi, O. M. (2005) · Journal of the American Chemical Society · doi:10.1021/ja0570032 · Cited by 2,876
A route to high surface area, porosity and inclusion of large molecules in crystals
Materials Design and Discovery Group, Chae, H. K., Siberio-Pérez, D. Y., Kim, J., Go, Y., Eddaoudi, M., Matzger, A. J., O'Keeffe, M., & Yaghi, O. M. (2004) · Nature · doi:10.1038/nature02311 · Cited by 2,816
Cited by
Introduction to Metal–Organic Frameworks
Zhou, H.-C., Long, J. R., & Yaghi, O. M. (2012) · Chemical Reviews · doi:10.1021/cr300014x · Cited by 7,720
Self-citationCarbon Dioxide Capture in Metal–Organic Frameworks
Sumida, K., Rogow, D. L., Mason, J. A., McDonald, T. M., Bloch, E. D., Herm, Z. R., Bae, T.-H., & Long, J. R. (2012) · Chemical Reviews · doi:10.1021/cr2003272 · Cited by 6,408
Self-citationCarbon capture and conversion using metal–organic frameworks and MOF-based materials
Ding, M., Flaig, R. W., Jiang, H.-L., & Yaghi, O. M. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00829a · Cited by 2,616
Hydrocarbon Separations in a Metal-Organic Framework with Open Iron(II) Coordination Sites
Bloch, E. D., Queen, W. L., Krishna, R., Zadrozny, J. M., Brown, C. M., & Long, J. R. (2012) · Science · doi:10.1126/science.1217544 · Cited by 1,928
Self-citationRecent advances in gas storage and separation using metal–organic frameworks
Li, H., Wang, K., Sun, Y., Lollar, C. T., Li, J., & Zhou, H.-C. (2018) · Materials Today · doi:10.1016/j.mattod.2017.07.006 · Cited by 1,571
MOF-Based Membranes for Gas Separations
Qian, Q., Asinger, P. A., Lee, M. J., Han, G., Mizrahi Rodriguez, K., Lin, S., Benedetti, F. M., Wu, A. X., Chi, W. S., & Smith, Z. P. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00119 · Cited by 1,553
The chemistry of metal–organic frameworks for CO2 capture, regeneration and conversion
Trickett, C. A., Helal, A., Al-Maythalony, B. A., Yamani, Z. H., Cordova, K. E., & Yaghi, O. M. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.45 · Cited by 1,524
Cooperative insertion of CO2 in diamine-appended metal-organic frameworks
McDonald, T. M., Mason, J. A., Kong, X., Bloch, E. D., Gygi, D., Dani, A., Crocellà, V., Giordanino, F., Odoh, S. O., Drisdell, W. S., et al. (2015) · Nature · doi:10.1038/nature14327 · Cited by 1,342
Self-citationProgress in adsorption-based CO2capture by metal–organic frameworks
Liu, J., Thallapally, P. K., McGrail, B. P., Brown, D. R., & Liu, J. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15221a · Cited by 1,339
Metal–Organic Frameworks for Separation
Zhao, X., Wang, Y., Li, D., Bu, X., & Feng, P. (2018) · Advanced Materials · doi:10.1002/adma.201705189 · Cited by 1,305
McDonald, T. M., Lee, W. R., Mason, J. A., Wiers, B. M., Hong, C. S., & Long, J. R. (2012) · Journal of the American Chemical Society · doi:10.1021/ja300034j · Cited by 1,289
Self-citationEvaluating metal–organic frameworks for natural gas storage
Mason, J. A., Veenstra, M., & Long, J. R. (2014) · Chem. Sci. · doi:10.1039/c3sc52633j · Cited by 1,239
Self-citationCovalent Organic Frameworks for CO2 Capture
Zeng, Y., Zou, R., & Zhao, Y. (2016) · Advanced Materials · doi:10.1002/adma.201505004 · Cited by 1,140
Nanoporous organic polymer networks
Dawson, R., Cooper, A. I., & Adams, D. J. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.09.002 · Cited by 1,114
CO2 Capture and Separations Using MOFs: Computational and Experimental Studies
Yu, J., Xie, L.-H., Li, J.-R., Ma, Y., Seminario, J. M., & Balbuena, P. B. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00626 · Cited by 1,047
Methane Storage in Metal–Organic Frameworks: Current Records, Surprise Findings, and Challenges
Peng, Y., Krungleviciute, V., Eryazici, I., Hupp, J. T., Farha, O. K., & Yildirim, T. (2013) · Journal of the American Chemical Society · doi:10.1021/ja4045289 · Cited by 1,018
Kökçam-Demir, Ü., Goldman, A., Esrafili, L., Gharib, M., Morsali, A., Weingart, O., & Janiak, C. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00609e · Cited by 895
Data-driven design of metal–organic frameworks for wet flue gas CO2 capture
Boyd, P. G., Chidambaram, A., García-Díez, E., Ireland, C. P., Daff, T. D., Bounds, R., Gładysiak, A., Schouwink, P., Moosavi, S. M., Maroto-Valer, M. M., et al. (2019) · Nature · doi:10.1038/s41586-019-1798-7 · Cited by 885
Microporous metal-organic framework with potential for carbon dioxide capture at ambient conditions
Xiang, S., He, Y., Zhang, Z., Wu, H., Zhou, W., Krishna, R., & Chen, B. (2012) · Nature Communications · doi:10.1038/ncomms1956 · Cited by 875
Self-citationBiogas as a renewable energy fuel – A review of biogas upgrading, utilisation and storage
Ullah Khan, I., Hafiz Dzarfan Othman, M., Hashim, H., Matsuura, T., Ismail, A. F., Rezaei-DashtArzhandi, M., & Wan Azelee, I. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.08.035 · Cited by 775
Perspective of microporous metal–organic frameworks for CO2capture and separation
Zhang, Z., Yao, Z.-Z., Xiang, S., & Chen, B. (2014) · Energy & Environmental Science · doi:10.1039/c4ee00143e · Cited by 767
Huang, N., Chen, X., Krishna, R., & Jiang, D. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201411262 · Cited by 762
Self-citationBest Practices for the Synthesis, Activation, and Characterization of Metal–Organic Frameworks
Howarth, A. J., Peters, A. W., Vermeulen, N. A., Wang, T. C., Hupp, J. T., & Farha, O. K. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b02626 · Cited by 746
Mixed-metal metal–organic frameworks
Abednatanzi, S., Gohari Derakhshandeh, P., Depauw, H., Coudert, F.-X., Vrielinck, H., Van Der Voort, P., & Leus, K. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00337h · Cited by 741
Ben-Mansour, R., Habib, M. A., Bamidele, O. E., Basha, M., Qasem, N. A. A., Peedikakkal, A., Laoui, T., & Ali, M. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.10.011 · Cited by 722
He, Y., Krishna, R., & Chen, B. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22858k · Cited by 674
Self-citationAdsorption of Carbon Dioxide for post-combustion capture: a review
Raganati, F., Miccio, F., & Ammendola, P. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.1c01618 · Cited by 661
Langmuir’s Theory of Adsorption: A Centennial Review
Swenson, H., & Stadie, N. P. (2019) · Langmuir · doi:10.1021/acs.langmuir.9b00154 · Cited by 646
Zhang, Z., Zhao, Y., Gong, Q., Li, Z., & Li, J. (2013) · Chem. Commun. · doi:10.1039/c2cc35561b · Cited by 609
Direct Air Capture of CO2 by Physisorbent Materials
Kumar, A., Madden, D. G., Lusi, M., Chen, K., Daniels, E. A., Curtin, T., Perry, J. J., & Zaworotko, M. J. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201506952 · Cited by 588
CO2capture and conversion using Mg-MOF-74 prepared by a sonochemical method
Yang, D.-A., Cho, H.-Y., Kim, J., Yang, S.-T., & Ahn, W.-S. (2012) · Energy Environ. Sci. · doi:10.1039/c1ee02234b · Cited by 585
Polyamine‐Tethered Porous Polymer Networks for Carbon Dioxide Capture from Flue Gas
Lu, W., Sculley, J. P., Yuan, D., Krishna, R., Wei, Z., & Zhou, H. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201202176 · Cited by 581
Self-citationSulfonate-Grafted Porous Polymer Networks for Preferential CO2 Adsorption at Low Pressure
Lu, W., Yuan, D., Sculley, J., Zhao, D., Krishna, R., & Zhou, H.-C. (2011) · Journal of the American Chemical Society · doi:10.1021/ja2087773 · Cited by 571
Self-citationThe thermal stability of metal-organic frameworks
Healy, C., Patil, K. M., Wilson, B. H., Hermanspahn, L., Harvey-Reid, N. C., Howard, B. I., Kleinjan, C., Kolien, J., Payet, F., Telfer, S. G., et al. (2020) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2020.213388 · Cited by 535
McDonald, T. M., D'Alessandro, D. M., Krishna, R., & Long, J. R. (2011) · Chemical Science · doi:10.1039/c1sc00354b · Cited by 522
Self-citationThe role of metal–organic frameworks in a carbon-neutral energy cycle
Schoedel, A., Ji, Z., & Yaghi, O. M. (2016) · Nature Energy · doi:10.1038/nenergy.2016.34 · Cited by 516
Yang, Q., Liu, D., Zhong, C., & Li, J.-R. (2013) · Chemical Reviews · doi:10.1021/cr400005f · Cited by 514
Membrane gas separation technologies for biogas upgrading
Chen, X. Y., Vinh-Thang, H., Ramirez, A. A., Rodrigue, D., & Kaliaguine, S. (2015) · RSC Advances · doi:10.1039/c5ra00666j · Cited by 503
Metal–organic framework technologies for water remediation: towards a sustainable ecosystem
Mon, M., Bruno, R., Ferrando-Soria, J., Armentano, D., & Pardo, E. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta00264a · Cited by 480
Metal organic frameworks mimicking natural enzymes: a structural and functional analogy
Nath, I., Chakraborty, J., & Verpoort, F. (2016) · Chemical Society Reviews · doi:10.1039/c6cs00047a · Cited by 477
Stability of amine-functionalized CO2 adsorbents: a multifaceted puzzle
Jahandar Lashaki, M., Khiavi, S., & Sayari, A. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00877a · Cited by 460
Queen, W. L., Hudson, M. R., Bloch, E. D., Mason, J. A., Gonzalez, M. I., Lee, J. S., Gygi, D., Howe, J. D., Lee, K., Darwish, T. A., et al. (2014) · Chem. Sci. · doi:10.1039/c4sc02064b · Cited by 446
Self-citationGeier, S. J., Mason, J. A., Bloch, E. D., Queen, W. L., Hudson, M. R., Brown, C. M., & Long, J. R. (2013) · Chemical Science · doi:10.1039/c3sc00032j · Cited by 443
Self-citationMetal‐Organic Frameworks for Carbon Dioxide Capture and Methane Storage
Lin, Y., Kong, C., Zhang, Q., & Chen, L. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601296 · Cited by 443
Evaluation of cation-exchanged zeolite adsorbents for post-combustion carbon dioxide capture
Bae, T.-H., Hudson, M. R., Mason, J. A., Queen, W. L., Dutton, J. J., Sumida, K., Micklash, K. J., Kaye, S. S., Brown, C. M., & Long, J. R. (2013) · Energy Environ. Sci. · doi:10.1039/c2ee23337a · Cited by 437
Self-citationHuang, N., Krishna, R., & Jiang, D. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b04300 · Cited by 437
Self-citationPorous Organic Polymers for Post‐Combustion Carbon Capture
Zou, L., Sun, Y., Che, S., Yang, X., Wang, X., Bosch, M., Wang, Q., Li, H., Smith, M., Yuan, S., et al. (2017) · Advanced Materials · doi:10.1002/adma.201700229 · Cited by 432
Unconventional, Highly Selective CO2 Adsorption in Zeolite SSZ-13
Hudson, M. R., Queen, W. L., Mason, J. A., Fickel, D. W., Lobo, R. F., & Brown, C. M. (2012) · Journal of the American Chemical Society · doi:10.1021/ja210580b · Cited by 431
Self-citationYounas, M., Rezakazemi, M., Daud, M., Wazir, M. B., Ahmad, S., Ullah, N., Inamuddin, & Ramakrishna, S. (2020) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100849 · Cited by 421
Metal–organic frameworks for upgrading biogas via CO2 adsorption to biogas green energy
Chaemchuen, S., Kabir, N. A., Zhou, K., & Verpoort, F. (2013) · Chemical Society Reviews · doi:10.1039/c3cs60244c · Cited by 416
Inverse design of nanoporous crystalline reticular materials with deep generative models
Yao, Z., Sánchez-Lengeling, B., Bobbitt, N. S., Bucior, B. J., Kumar, S. G. H., Collins, S. P., Burns, T., Woo, T. K., Farha, O. K., Snurr, R. Q., et al. (2021) · Nature Machine Intelligence · doi:10.1038/s42256-020-00271-1 · Cited by 400
Mason, J. A., McDonald, T. M., Bae, T.-H., Bachman, J. E., Sumida, K., Dutton, J. J., Kaye, S. S., & Long, J. R. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b00838 · Cited by 384
Self-citationPetrovic, B., Gorbounov, M., & Masoudi Soltani, S. (2021) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2020.110751 · Cited by 381
Lyndon, R., Konstas, K., Ladewig, B. P., Southon, P. D., Kepert, P. C. J., & Hill, M. R. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201206359 · Cited by 365
Structuring adsorbents and catalysts by processing of porous powders
Akhtar, F., Andersson, L., Ogunwumi, S., Hedin, N., & Bergström, L. (2014) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2014.01.008 · Cited by 363
Du, L., Lu, Z., Zheng, K., Wang, J., Zheng, X., Pan, Y., You, X., & Bai, J. (2013) · Journal of the American Chemical Society · doi:10.1021/ja309992a · Cited by 360
Ye, Y., Xian, S., Cui, H., Tan, K., Gong, L., Liang, B., Pham, T., Pandey, H., Krishna, R., Lan, P. C., et al. (2022) · Journal of the American Chemical Society · doi:10.1021/jacs.1c10620 · Cited by 359
Self-citationBelmabkhout, Y., Guillerm, V., & Eddaoudi, M. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.03.124 · Cited by 358
Trends in Solid Adsorbent Materials Development for CO 2 Capture
Pardakhti, M., Jafari, T., Tobin, Z., Dutta, B., Moharreri, E., Shemshaki, N. S., Suib, S., & Srivastava, R. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b08487 · Cited by 357
The Chemistry of Porous Organic Molecular Materials
Little, M. A., & Cooper, A. I. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909842 · Cited by 357
Das, M. C., Guo, Q., He, Y., Kim, J., Zhao, C.-G., Hong, K., Xiang, S., Zhang, Z., Thomas, K. M., Krishna, R., et al. (2012) · Journal of the American Chemical Society · doi:10.1021/ja302380x · Cited by 354
Self-citationModification of the Mg/DOBDC MOF with Amines to Enhance CO2 Adsorption from Ultradilute Gases
Choi, S., Watanabe, T., Bae, T.-H., Sholl, D. S., & Jones, C. W. (2012) · The Journal of Physical Chemistry Letters · doi:10.1021/jz300328j · Cited by 352
Ab initio carbon capture in open-site metal–organic frameworks
Dzubak, A. L., Lin, L.-C., Kim, J., Swisher, J. A., Poloni, R., Maximoff, S. N., Smit, B., & Gagliardi, L. (2012) · Nature Chemistry · doi:10.1038/nchem.1432 · Cited by 351
A Water Stable Metal–Organic Framework with Optimal Features for CO2 Capture
Yang, Q., Vaesen, S., Ragon, F., Wiersum, A. D., Wu, D., Lago, A., Devic, T., Martineau, C., Taulelle, F., Llewellyn, P. L., et al. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201302682 · Cited by 341
Choi, W., Min, K., Kim, C., Ko, Y. S., Jeon, J. W., Seo, H., Park, Y.-K., & Choi, M. (2016) · Nature Communications · doi:10.1038/ncomms12640 · Cited by 338
CO2 Dynamics in a Metal–Organic Framework with Open Metal Sites
Kong, X., Scott, E., Ding, W., Mason, J. A., Long, J. R., & Reimer, J. A. (2012) · Journal of the American Chemical Society · doi:10.1021/ja306822p · Cited by 335
Self-citationKatz, M. J., Moon, S.-Y., Mondloch, J. E., Beyzavi, M. H., Stephenson, C. J., Hupp, J. T., & Farha, O. K. (2015) · Chemical Science · doi:10.1039/c4sc03613a · Cited by 334
Lee, W. R., Hwang, S. Y., Ryu, D. W., Lim, K. S., Han, S. S., Moon, D., Choi, J., & Hong, C. S. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42328j · Cited by 329
Microporous metal–organic frameworks for storage and separation of small hydrocarbons
He, Y., Zhou, W., Krishna, R., & Chen, B. (2012) · Chemical Communications · doi:10.1039/c2cc35418g · Cited by 322
Self-citationAmmendola, P., Raganati, F., & Chirone, R. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.04.037 · Cited by 314
Microwave synthesis and characterization of MOF-74 (M=Ni, Mg) for gas separation
Wu, X., Bao, Z., Yuan, B., Wang, J., Sun, Y., Luo, H., & Deng, S. (2013) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2013.06.023 · Cited by 314
Lee, K., Howe, J. D., Lin, L.-C., Smit, B., & Neaton, J. B. (2015) · Chemistry of Materials · doi:10.1021/cm502760q · Cited by 307
Quantum-Chemical Characterization of the Properties and Reactivities of Metal–Organic Frameworks
Odoh, S. O., Cramer, C. J., Truhlar, D. G., & Gagliardi, L. (2015) · Chemical Reviews · doi:10.1021/cr500551h · Cited by 306
Enhancing Proton Conduction in a Metal–Organic Framework by Isomorphous Ligand Replacement
Kim, S., Dawson, K. W., Gelfand, B. S., Taylor, J. M., & Shimizu, G. K. H. (2013) · Journal of the American Chemical Society · doi:10.1021/ja310675x · Cited by 303
CO2 Post-combustion Capture: A Critical Review of Current Technologies and Future Directions
Raganati, F., & Ammendola, P. (2024) · Energy & Fuels · doi:10.1021/acs.energyfuels.4c02513 · Cited by 296
Materials challenges for the development of solid sorbents for post-combustion carbon capture
Drage, T. C., Snape, C. E., Stevens, L. A., Wood, J., Wang, J., Cooper, A. I., Dawson, R., Guo, X., Satterley, C., & Irons, R. (2012) · J. Mater. Chem. · doi:10.1039/c2jm12592g · Cited by 292
Sinha, A., Darunte, L. A., Jones, C. W., Realff, M. J., & Kawajiri, Y. (2017) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b03887 · Cited by 282
Li, L., Tang, S., Wang, C., Lv, X., Jiang, M., Wu, H., & Zhao, X. (2014) · Chemical Communications · doi:10.1039/c3cc48275h · Cited by 278
Liu, W.-J., Jiang, H., Tian, K., Ding, Y.-W., & Yu, H.-Q. (2013) · Environmental Science & Technology · doi:10.1021/es401286p · Cited by 276
Fluorinated metal–organic frameworks for gas separation
Ebadi Amooghin, A., Sanaeepur, H., Luque, R., Garcia, H., & Chen, B. (2022) · Chemical Society Reviews · doi:10.1039/d2cs00442a · Cited by 271
Liao, P.-Q., Chen, H., Zhou, D.-D., Liu, S.-Y., He, C.-T., Rui, Z., Ji, H., Zhang, J.-P., & Chen, X.-M. (2015) · Energy & Environmental Science · doi:10.1039/c4ee02717e · Cited by 270
Chen, G., Liu, G., Pan, Y., Liu, G., Gu, X., Jin, W., & Xu, N. (2023) · Chemical Society Reviews · doi:10.1039/d3cs00370a · Cited by 269
Critical role of small micropores in high CO2 uptake
Zhang, Z., Zhou, J., Xing, W., Xue, Q., Yan, Z., Zhuo, S., & Qiao, S. Z. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp44436d · Cited by 263
Zeolite-templated carbons – three-dimensional microporous graphene frameworks
Nishihara, H., & Kyotani, T. (2018) · Chemical Communications · doi:10.1039/c8cc01932k · Cited by 266
Amine-functionalized metal–organic frameworks: structure, synthesis and applications
Lin, Y., Kong, C., & Chen, L. (2016) · RSC Advances · doi:10.1039/c6ra01536k · Cited by 256
Liao, P.-Q., Chen, X.-W., Liu, S.-Y., Li, X.-Y., Xu, Y.-T., Tang, M., Rui, Z., Ji, H., Zhang, J.-P., & Chen, X.-M. (2016) · Chemical Science · doi:10.1039/c6sc00836d · Cited by 253
Bloch, E. D., Hudson, M. R., Mason, J. A., Chavan, S., Crocellà, V., Howe, J. D., Lee, K., Dzubak, A. L., Queen, W. L., Zadrozny, J. M., et al. (2014) · Journal of the American Chemical Society · doi:10.1021/ja505318p · Cited by 252
Self-citationA Critical Review of CO2 Capture Technologies and Prospects for Clean Power Generation
Sifat, N. S., & Haseli, Y. (2019) · Energies · doi:10.3390/en12214143 · Cited by 226
Zhao, Y., Liu, X., Yao, K. X., Zhao, L., & Han, Y. (2012) · Chemistry of Materials · doi:10.1021/cm303072n · Cited by 221
Exceptional CO 2 working capacity in a heterodiamine-grafted metal–organic framework
Lee, W. R., Jo, H., Yang, L.-M., Lee, H., Ryu, D. W., Lim, K. S., Song, J. H., Min, D. Y., Han, S. S., Seo, J. G., et al. (2015) · Chemical Science · doi:10.1039/c5sc01191d · Cited by 153
Ben-Mansour, R., & Qasem, N. A. A. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.11.010 · Cited by 139
Pirngruber, G. D., Guillou, F., Gomez, A., & Clausse, M. (2013) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2013.01.010 · Cited by 99
Fixed bed adsorption as affected by thermodynamics and kinetics: yellow tuff for CO2 capture
Ammendola, P., Raganati, F., Chirone, R., & Miccio, F. (2020) · Powder Technology · doi:10.1016/j.powtec.2020.06.075 · Cited by 88
Mortazavi, N., Bahadori, M., Marandi, A., Tangestaninejad, S., Moghadam, M., Mirkhani, V., & Mohammadpoor-Baltork, I. (2021) · Sustainable Chemistry and Pharmacy · doi:10.1016/j.scp.2021.100495 · Cited by 54
Lian, Y., Deng, S., Li, S., Guo, Z., Zhao, L., & Yuan, X. (2019) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2019.03.029 · Cited by 48
Metadata
- Authors
- Mason, J. A., Sumida, K., Herm, Z. R., Krishna, R., & Long, J. R.
- Venue
- Energy & Environmental Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2011
- Volume
- 4
- Issue
- 8
- Pages
- 3030
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2140743414
- Cited by
- 1,072
- References
- 79
- FWCI
- 123.51
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.