The DOI matches its Crossref record; 63 of the 63 references it cites were found in a registry or an index.
High thermal and chemical stability in pyrazolate-bridged metal–organic frameworks with exposed metal sites
Open accessAbstract
Reactions between the tritopic pyrazole-based ligand 1,3,5-tris(1H-pyrazol-4-yl)benzene (H3BTP) and transition metal acetate salts in DMF afford microporous pyrazolate-bridged metal–organic frameworks of the type M3(BTP)2·xsolvent (M = Ni (1), Cu, (2), Zn (3), Co (4)). Ab-initioX-ray powder diffraction methods were employed in determining the crystal structures of these compounds, revealing 1 and 2 to exhibit an expanded sodalite-like framework with accessible metal cation sites, while 3 and 4 possess tetragonal frameworks with hydrophobic surfaces and narrower channel diameters. Compounds 1–4 can be desolvated without loss of crystallinity by heating under dynamic vacuum, giving rise to microporous solids with BET surface areas of 1650, 1860, 930 and 1027 m2 g−1, respectively. Thermogravimetric analyses and powder X-ray diffraction measurements demonstrate the exceptional thermal and chemical stability of these frameworks. In particular, 3 is stable to heating in air up to at least 510 °C, while 1 is stable to heating in air to 430 °C, as well as to treatment with boiling aqueous solutions of pH 2 to 14 for two weeks. Unexpectedly, 2 and 3 are converted into new crystalline metal–organic frameworks upon heating in boiling water. With the combination of stability under extreme conditions, high surface area, and exposed metal sites, it is anticipated that 1 may open the way to testing metal–organic frameworks for catalytic processes that currently employ zeolites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Functional Porous Coordination Polymers
Kitagawa, S., Kitaura, R., & Noro, S. (2004) · Angewandte Chemie International Edition · doi:10.1002/anie.200300610 · Cited by 11,071
Selective gas adsorption and separation in metal–organic frameworks
Li, J.-R., Kuppler, R. J., & Zhou, H.-C. (2009) · Chemical Society Reviews · doi:10.1039/b802426j · Cited by 8,932
Eddaoudi, M., Kim, J., Rosi, N., Vodak, D., Wachter, J., O'Keeffe, M., & Yaghi, O. M. (2002) · Science · doi:10.1126/science.1067208 · Cited by 8,132
Metal-organic framework materials as catalysts
Lee, J., Farha, O. K., Roberts, J., Scheidt, K. A., Nguyen, S. T., & Hupp, J. T. (2009) · Chemical Society Reviews · doi:10.1039/b807080f · Cited by 7,969
Exceptional chemical and thermal stability of zeolitic imidazolate frameworks
Park, K. S., Ni, Z., Côté, A. P., Choi, J. Y., Huang, R., Uribe-Romo, F. J., Chae, H. K., O’Keeffe, M., & Yaghi, O. M. (2006) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0602439103 · Cited by 7,563
A New Zirconium Inorganic Building Brick Forming Metal Organic Frameworks with Exceptional Stability
Cavka, J. H., Jakobsen, S., Olsbye, U., Guillou, N., Lamberti, C., Bordiga, S., & Lillerud, K. P. (2008) · Journal of the American Chemical Society · doi:10.1021/ja8057953 · Cited by 7,336
Hybrid porous solids: past, present, future
Férey, G. (2008) · Chem. Soc. Rev. · doi:10.1039/b618320b · Cited by 5,822
From Microporous to Mesoporous Molecular Sieve Materials and Their Use in Catalysis
Corma, A. (1997) · Chemical Reviews · doi:10.1021/cr960406n · Cited by 5,791
Eddaoudi, M., Moler, D. B., Li, H., Chen, B., Reineke, T. M., O'Keeffe, M., & Yaghi, O. M. (2001) · Accounts of Chemical Research · doi:10.1021/ar000034b · Cited by 5,180
Hydrogen storage in metal–organic frameworks
Murray, L. J., Dincă, M., & Long, J. R. (2009) · Chemical Society Reviews · doi:10.1039/b802256a · Cited by 4,532
Self-citation
Cited by
The Chemistry and Applications of Metal-Organic Frameworks
Furukawa, H., Cordova, K. E., O’Keeffe, M., & Yaghi, O. M. (2013) · Science · doi:10.1126/science.1230444 · Cited by 16,945
Carbon Dioxide Capture in Metal–Organic Frameworks
Sumida, K., Rogow, D. L., Mason, J. A., McDonald, T. M., Bloch, E. D., Herm, Z. R., Bae, T.-H., & Long, J. R. (2012) · Chemical Reviews · doi:10.1021/cr2003272 · Cited by 6,408
Self-citationStable Metal–Organic Frameworks: Design, Synthesis, and Applications
Yuan, S., Feng, L., Wang, K., Pang, J., Bosch, M., Lollar, C., Sun, Y., Qin, J., Yang, X., Zhang, P., et al. (2018) · Advanced Materials · doi:10.1002/adma.201704303 · Cited by 2,981
Water Stability and Adsorption in Metal–Organic Frameworks
Burtch, N. C., Jasuja, H., & Walton, K. S. (2014) · Chemical Reviews · doi:10.1021/cr5002589 · Cited by 2,730
Tuning the structure and function of metal–organic frameworks via linker design
Lu, W., Wei, Z., Gu, Z.-Y., Liu, T.-F., Park, J., Park, J., Tian, J., Zhang, M., Zhang, Q., Gentle III, T., et al. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00003j · Cited by 2,252
Chemical, thermal and mechanical stabilities of metal–organic frameworks
Howarth, A. J., Liu, Y., Li, P., Li, Z., Wang, T. C., Hupp, J. T., & Farha, O. K. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2015.18 · Cited by 2,204
O’Keeffe, M., & Yaghi, O. M. (2012) · Chemical Reviews · doi:10.1021/cr200205j · Cited by 2,143
Bavykina, A., Kolobov, N., Khan, I. S., Bau, J. A., Ramirez, A., & Gascon, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00685 · Cited by 1,754
Improving MOF stability: approaches and applications
Ding, M., Cai, X., & Jiang, H.-L. (2019) · Chemical Science · doi:10.1039/c9sc03916c · Cited by 1,666
Wang, B., Lv, X.-L., Feng, D., Xie, L.-H., Zhang, J., Li, M., Xie, Y., Li, J.-R., & Zhou, H.-C. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b01663 · Cited by 1,568
Shearer, G. C., Chavan, S., Bordiga, S., Svelle, S., Olsbye, U., & Lillerud, K. P. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b00602 · Cited by 1,437
Metal–organic frameworks: Structures and functional applications
Jiao, L., Seow, J. Y. R., Skinner, W. S., Wang, Z. U., & Jiang, H.-L. (2019) · Materials Today · doi:10.1016/j.mattod.2018.10.038 · Cited by 1,404
Chughtai, A. H., Ahmad, N., Younus, H. A., Laypkov, A., & Verpoort, F. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00395k · Cited by 1,383
Applications of water stable metal–organic frameworks
Wang, C., Liu, X., Keser Demir, N., Chen, J. P., & Li, K. (2016) · Chemical Society Reviews · doi:10.1039/c6cs00362a · Cited by 1,249
Metal–Organic Framework-Based Catalysts with Single Metal Sites
Wei, Y.-S., Zhang, M., Zou, R., & Xu, Q. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00757 · Cited by 1,233
The Current Status of MOF and COF Applications
Freund, R., Zaremba, O., Arnauts, G., Ameloot, R., Skorupskii, G., Dincă, M., Bavykina, A., Gascon, J., Ejsmont, A., Goscianska, J., et al. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202106259 · Cited by 1,194
Metal Organic Framework Catalysis: Quo vadis?
Gascon, J., Corma, A., Kapteijn, F., & Llabrés i Xamena, F. X. (2014) · ACS Catalysis · doi:10.1021/cs400959k · Cited by 960
Structures of Metal–Organic Frameworks with Rod Secondary Building Units
Schoedel, A., Li, M., Li, D., O’Keeffe, M., & Yaghi, O. M. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00346 · Cited by 909
Adsorptive separation on metal–organic frameworks in the liquid phase
Van de Voorde, B., Bueken, B., Denayer, J., & De Vos, D. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00006d · Cited by 874
Zeolite-like metal–organic frameworks (ZMOFs): design, synthesis, and properties
Eddaoudi, M., Sava, D. F., Eubank, J. F., Adil, K., & Guillerm, V. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00230j · Cited by 773
Metal–Organic Frameworks for Water Harvesting from Air
Kalmutzki, M. J., Diercks, C. S., & Yaghi, O. M. (2018) · Advanced Materials · doi:10.1002/adma.201704304 · Cited by 772
Mixed-metal metal–organic frameworks
Abednatanzi, S., Gohari Derakhshandeh, P., Depauw, H., Coudert, F.-X., Vrielinck, H., Van Der Voort, P., & Leus, K. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00337h · Cited by 741
Metal–Organic Frameworks against Toxic Chemicals
Islamoglu, T., Chen, Z., Wasson, M. C., Buru, C. T., Kirlikovali, K. O., Afrin, U., Mian, M. R., & Farha, O. K. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00828 · Cited by 707
Gagnon, K. J., Perry, H. P., & Clearfield, A. (2012) · Chemical Reviews · doi:10.1021/cr2002257 · Cited by 705
A historical overview of the activation and porosity of metal–organic frameworks
Zhang, X., Chen, Z., Liu, X., Hanna, S. L., Wang, X., Taheri-Ledari, R., Maleki, A., Li, P., & Farha, O. K. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00997k · Cited by 692
Proton Transport in Metal–Organic Frameworks
Lim, D.-W., & Kitagawa, H. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00842 · Cited by 689
Metal–organic frameworks (MOFs) for the removal of emerging contaminants from aquatic environments
Dhaka, S., Kumar, R., Deep, A., Kurade, M. B., Ji, S.-W., & Jeon, B.-H. (2019) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2018.10.003 · Cited by 615
Porous Inorganic Membranes for CO2 Capture: Present and Prospects
Pera-Titus, M. (2014) · Chemical Reviews · doi:10.1021/cr400237k · Cited by 614
Water and Metal–Organic Frameworks: From Interaction toward Utilization
Liu, X., Wang, X., & Kapteijn, F. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00746 · Cited by 614
High valence 3p and transition metal based MOFs
Devic, T., & Serre, C. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00081a · Cited by 605
Zhang, W., Hu, Y., Ge, J., Jiang, H.-L., & Yu, S.-H. (2014) · Journal of the American Chemical Society · doi:10.1021/ja509960n · Cited by 588
UiO-66 metal–organic frameworks in water treatment: A critical review
Ahmadijokani, F., Molavi, H., Rezakazemi, M., Tajahmadi, S., Bahi, A., Ko, F., Aminabhavi, T. M., Li, J.-R., & Arjmand, M. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100904 · Cited by 559
Lu, X.-F., Liao, P.-Q., Wang, J.-W., Wu, J.-X., Chen, X.-W., He, C.-T., Zhang, J.-P., Li, G.-R., & Chen, X.-M. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b03125 · Cited by 538
Metal–Organic Frameworks for Food Safety
Wang, P.-L., Xie, L.-H., Joseph, E. A., Li, J.-R., Su, X.-O., & Zhou, H.-C. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00257 · Cited by 533
Understanding the Effect of Water on CO2 Adsorption
Kolle, J. M., Fayaz, M., & Sayari, A. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00762 · Cited by 523
Adsorption-Driven Heat Pumps: The Potential of Metal–Organic Frameworks
de Lange, M. F., Verouden, K. J. F. M., Vlugt, T. J. H., Gascon, J., & Kapteijn, F. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00059 · Cited by 510
H2storage in isostructural UiO-67 and UiO-66 MOFs
Chavan, S., Vitillo, J. G., Gianolio, D., Zavorotynska, O., Civalleri, B., Jakobsen, S., Nilsen, M. H., Valenzano, L., Lamberti, C., Lillerud, K. P., et al. (2012) · Phys. Chem. Chem. Phys. · doi:10.1039/c1cp23434j · Cited by 485
Construction and application of base-stable MOFs: a critical review
Wang, K., Li, Y., Xie, L.-H., Li, X., & Li, J.-R. (2022) · Chemical Society Reviews · doi:10.1039/d1cs00891a · Cited by 462
Covalent Chemistry beyond Molecules
Jiang, J., Zhao, Y., & Yaghi, O. M. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b10666 · Cited by 448
A Water-Stable Metal–Organic Framework with Highly Acidic Pores for Proton-Conducting Applications
Taylor, J. M., Dawson, K. W., & Shimizu, G. K. H. (2013) · Journal of the American Chemical Society · doi:10.1021/ja310435e · Cited by 440
A Modulated Hydrothermal (MHT) Approach for the Facile Synthesis of UiO-66-Type MOFs
Hu, Z., Peng, Y., Kang, Z., Qian, Y., & Zhao, D. (2015) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.5b00435 · Cited by 436
Pyrazolate-Based Porphyrinic Metal–Organic Framework with Extraordinary Base-Resistance
Wang, K., Lv, X.-L., Feng, D., Li, J., Chen, S., Sun, J., Song, L., Xie, Y., Li, J.-R., & Zhou, H.-C. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b10881 · Cited by 419
Metal–organic frameworks for upgrading biogas via CO2 adsorption to biogas green energy
Chaemchuen, S., Kabir, N. A., Zhou, K., & Verpoort, F. (2013) · Chemical Society Reviews · doi:10.1039/c3cs60244c · Cited by 416
Kinetic stability of metal–organic frameworks for corrosive and coordinating gas capture
Rieth, A. J., Wright, A. M., & Dincă, M. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0140-1 · Cited by 402
Water-resistant porous coordination polymers for gas separation
Duan, J., Jin, W., & Kitagawa, S. (2017) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2016.11.004 · Cited by 394
Carbon dioxide capture and conversion by an acid-base resistant metal-organic framework
Liang, L., Liu, C., Jiang, F., Chen, Q., Zhang, L., Xue, H., Jiang, H.-L., Qian, J., Yuan, D., & Hong, M. (2017) · Nature Communications · doi:10.1038/s41467-017-01166-3 · Cited by 386
Luo, X.-Z., Jia, X.-J., Deng, J.-H., Zhong, J.-L., Liu, H.-J., Wang, K.-J., & Zhong, D.-C. (2013) · Journal of the American Chemical Society · doi:10.1021/ja403002m · Cited by 381
Recent advances and challenges of metal–organic framework membranes for gas separation
Kang, Z., Fan, L., & Sun, D. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta01142c · Cited by 366
Structuring adsorbents and catalysts by processing of porous powders
Akhtar, F., Andersson, L., Ogunwumi, S., Hedin, N., & Bergström, L. (2014) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2014.01.008 · Cited by 363
Metal organic frameworks as precursors for the manufacture of advanced catalytic materials
Oar-Arteta, L., Wezendonk, T., Sun, X., Kapteijn, F., & Gascon, J. (2017) · Materials Chemistry Frontiers · doi:10.1039/c7qm00007c · Cited by 361
Recent advances in carbon dioxide capture with metal‐organic frameworks
Liu, Y., Wang, Z. U., & Zhou, H. (2012) · Greenhouse Gases: Science and Technology · doi:10.1002/ghg.1296 · Cited by 357
Linker functionalized metal-organic frameworks
Ali Akbar Razavi, S., & Morsali, A. (2019) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2019.213023 · Cited by 341
Controlled Gas Uptake in Metal–Organic Frameworks with Record Ammonia Sorption
Rieth, A. J., & Dincă, M. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b00313 · Cited by 336
Are Zr6-based MOFs water stable? Linker hydrolysis vs. capillary-force-driven channel collapse
Mondloch, J. E., Katz, M. J., Planas, N., Semrouni, D., Gagliardi, L., Hupp, J. T., & Farha, O. K. (2014) · Chemical Communications · doi:10.1039/c4cc02401j · Cited by 336
Rational strategies for proton-conductive metal–organic frameworks
Lim, D.-W., & Kitagawa, H. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00004g · Cited by 334
Ligand Rigidification for Enhancing the Stability of Metal–Organic Frameworks
Lv, X.-L., Yuan, S., Xie, L.-H., Darke, H. F., Chen, Y., He, T., Dong, C., Wang, B., Zhang, Y.-Z., Li, J.-R., et al. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b02947 · Cited by 322
The stability of MOFs in aqueous solutions—research progress and prospects
An, Y., Lv, X., Jiang, W., Wang, L., Shi, Y., Hang, X., & Pang, H. (2024) · Green Chemical Engineering · doi:10.1016/j.gce.2023.07.004 · Cited by 311
Increasing the Stability of Metal-Organic Frameworks
Bosch, M., Zhang, M., & Zhou, H.-C. (2014) · Advances in Chemistry · doi:10.1155/2014/182327 · Cited by 309
Rieth, A. J., Tulchinsky, Y., & Dincă, M. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b05723 · Cited by 305
Coordination polymers and metal–organic frameworks based on poly(pyrazole)-containing ligands
Pettinari, C., Tăbăcaru, A., & Galli, S. (2016) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2015.08.005 · Cited by 269
Self-citationHu, Y., Ding, M., Liu, X.-Q., Sun, L.-B., & Jiang, H.-L. (2016) · Chemical Communications · doi:10.1039/c6cc01597b · Cited by 261
Abdi, J., Sisi, A. J., Hadipoor, M., & Khataee, A. (2022) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2021.127558 · Cited by 144
Zhu, X., Li, S., Shi, Y., & Cai, N. (2019) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2019.100784 · Cited by 129
Materials design by evolutionary optimization of functional groups in metal-organic frameworks
Collins, S. P., Daff, T. D., Piotrkowski, S. S., & Woo, T. K. (2016) · Science Advances · doi:10.1126/sciadv.1600954 · Cited by 107
Metadata
- Authors
- Colombo, V., Galli, S., Choi, H. J., Han, G. D., Maspero, A., Palmisano, G., Masciocchi, N., & Long, J. R.
- Venue
- Chemical Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2011
- Volume
- 2
- Issue
- 7
- Pages
- 1311
- ISSN
- 2041-6520 (ISSN-L)
- 2041-6539
- OpenAlex
- W2098980266
- Cited by
- 572
- References
- 63
- FWCI
- 21.99
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.