The DOI matches its Crossref record; 47 of the 47 references it cites were found in a registry or an index.
Chemical tailoring of gelatin to adjust its chemical and physical properties for functional bioprinting
Abstract
Double chemical functionalization of gelatin by methacrylation and acetylation of free amino groups enables control over both the viscous behavior of its solutions and the mechanical properties of the resulting hydrogels after photochemical crosslinking. The degree of methacrylation is controlled by the molar excess of methacrylic anhydride applied. Tenfold molar excess leads to highly methacrylated gelatin (GM10), resulting in solutions with low viscosities within the inkjet-printable range (10 wt%: 3.3 ± 0.5 mPa s, 37 °C) and crosslinked hydrogels with high storage moduli G′ (10 wt%: 15.2 ± 6.4 kPa). Twofold excess of methacrylic anhydride leads to less methacrylated gelatin (GM2) proper for preparation of soft hydrogels (10 wt%: G′ = 9.8 ± 4.6 mPa s) but its solutions are highly viscous (10 wt%: 14.2 ± 1.1 mPa s, 37 °C) and thus prone to clogging printing nozzles. Here we show that additional introduction of acetyl functionalities into GM2 results in a significant decrease in solution viscosity (10 wt%: 2.9 ± 0.2 mPa s, 37 °C) and prevention of physical gel formation. In such a manner twofold functionalized gelatin can be inkjet-printed while the degree of chemical crosslinking remains low and the resulting gels are soft. Thus, by adjustable twofold modification of gelatin, i.e. inserting photochemically reactive and inert groups, a versatile bioink for inkjet bioprinting is created, which allows for addressing ECM based hydrogel matrices with a broad range of physical properties. Moreover, bioinks are proven to be cytocompatible and proper for inkjet printing of viable mammalian cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Langer, R., & Vacanti, J. P. (1993) · Science · doi:10.1126/science.8493529 · Cited by 9,893
Hydrogels for biomedical applications
Hoffman, A. S. (2012) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.09.010 · Cited by 3,396
Cell-laden microengineered gelatin methacrylate hydrogels
Nichol, J. W., Koshy, S. T., Bae, H., Hwang, C. M., Yamanlar, S., & Khademhosseini, A. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.03.064 · Cited by 2,377
Inkjet Printing for Materials and Devices
Calvert, P. (2001) · Chemistry of Materials · doi:10.1021/cm0101632 · Cited by 1,822
Structural and Rheological Properties of Methacrylamide Modified Gelatin Hydrogels
Van Den Bulcke, A. I., Bogdanov, B., De Rooze, N., Schacht, E. H., Cornelissen, M., & Berghmans, H. (2000) · Biomacromolecules · doi:10.1021/bm990017d · Cited by 1,536
Mazur, P. (1970) · Science · doi:10.1126/science.168.3934.939 · Cited by 1,402
Department of Materials, U. O. O., Sachlos, E., & Czernuszka, J. (2003) · European Cells and Materials · doi:10.22203/ecm.v005a03 · Cited by 1,303
Collagen-Based Biomaterials for Tissue Engineering Applications
Parenteau-Bareil, R., Gauvin, R., & Berthod, F. (2010) · Materials · doi:10.3390/ma3031863 · Cited by 1,256
Cell Encapsulation in Biodegradable Hydrogels for Tissue Engineering Applications
Nicodemus, G. D., & Bryant, S. J. (2008) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2007.0332 · Cited by 1,239
Additive manufacturing of tissues and organs
Melchels, F. P. W., Domingos, M. A. N., Klein, T. J., Malda, J., Bartolo, P. J., & Hutmacher, D. W. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.11.007 · Cited by 1,213
Aligned biodegradable nanofibrous structure: a potential scaffold for blood vessel engineering
Xu, C. Y., Inai, R., Kotaki, M., & Ramakrishna, S. (2004) · Biomaterials · doi:10.1016/s0142-9612(03)00593-3 · Cited by 1,213
Printing and Prototyping of Tissues and Scaffolds
Derby, B. (2012) · Science · doi:10.1126/science.1226340 · Cited by 1,108
Badylak, S. F., Taylor, D., & Uygun, K. (2011) · Annual Review of Biomedical Engineering · doi:10.1146/annurev-bioeng-071910-124743 · Cited by 1,041
Inkjet printing of viable mammalian cells
Xu, T., Jin, J., Gregory, C., Hickman, J. J., & Boland, T. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.04.011 · Cited by 1,035
Inkjet printing as a deposition and patterning tool for polymers and inorganic particles
Tekin, E., Smith, P. J., & Schubert, U. S. (2008) · Soft Matter · doi:10.1039/b711984d · Cited by 807
Human microvasculature fabrication using thermal inkjet printing technology
Cui, X., & Boland, T. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.07.056 · Cited by 704
Electrospinning for tissue engineering scaffolds
Lannutti, J., Reneker, D., Ma, T., Tomasko, D., & Farson, D. (2007) · Materials Science and Engineering: C · doi:10.1016/j.msec.2006.05.019 · Cited by 693
Direct Human Cartilage Repair Using Three-Dimensional Bioprinting Technology
Cui, X., Breitenkamp, K., Finn, M. G., Lotz, M., & D'Lima, D. D. (2012) · Tissue Engineering Part A · doi:10.1089/ten.tea.2011.0543 · Cited by 686
Cellular materials as porous scaffolds for tissue engineering
Freyman, T. M., Yannas, I. V., & Gibson, L. J. (2001) · Progress in Materials Science · doi:10.1016/s0079-6425(00)00018-9 · Cited by 584
Biocompatible Inkjet Printing Technique for Designed Seeding of Individual Living Cells
Nakamura, M., Kobayashi, A., Takagi, F., Watanabe, A., Hiruma, Y., Ohuchi, K., Iwasaki, Y., Horie, M., Morita, I., & Takatani, S. (2005) · Tissue Engineering · doi:10.1089/ten.2005.11.1658 · Cited by 538
Cell and organ printing 1: Protein and cell printers
Wilson, W. C., & Boland, T. (2003) · The Anatomical Record Part A: Discoveries in Molecular, Cellular, and Evolutionary Biology · doi:10.1002/ar.a.10057 · Cited by 531
Viability and electrophysiology of neural cell structures generated by the inkjet printing method
Xu, T., Gregory, C. A., Molnar, P., Cui, X., Jalota, S., Bhaduri, S. B., & Boland, T. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.048 · Cited by 520
Inkjet Printing of Well-Defined Polymer Dots and Arrays
de Gans, B.-J., & Schubert, U. S. (2004) · Langmuir · doi:10.1021/la049469o · Cited by 499
Tissue Engineering: Current State and Prospects
Stock, U. A., & Vacanti, J. P. (2001) · Annual Review of Medicine · doi:10.1146/annurev.med.52.1.443 · Cited by 483
SATHE, S. K., & SALUNKHE, D. K. (1981) · Journal of Food Science · doi:10.1111/j.1365-2621.1981.tb14533.x · Cited by 464
Tissue engineering heart valves: Valve leaflet replacement study in a lamb model
Shinoka, T., Breuer, C. K., Tanel, R. E., Zund, G., Miura, T., Ma, P. X., Langer, R., Vacanti, J. P., & Mayer, J. E. (1995) · The Annals of Thoracic Surgery · doi:10.1016/0003-4975(95)00733-4 · Cited by 449
Cell encapsulation using biopolymer gels for regenerative medicine
Hunt, N. C., & Grover, L. M. (2010) · Biotechnology Letters · doi:10.1007/s10529-010-0221-0 · Cited by 434
Formation of highly porous biodegradable scaffolds for tissue engineering
Mikos, A. G., & Temenoff, J. S. (2000) · Electronic Journal of Biotechnology · doi:10.2225/vol3-issue2-fulltext-5 · Cited by 426
Cell and organ printing 2: Fusion of cell aggregates in three‐dimensional gels
Boland, T., Mironov, V., Gutowska, A., Roth, E. A., & Markwald, R. R. (2003) · The Anatomical Record Part A: Discoveries in Molecular, Cellular, and Evolutionary Biology · doi:10.1002/ar.a.10059 · Cited by 382
Benton, J. A., DeForest, C. A., Vivekanandan, V., & Anseth, K. S. (2009) · Tissue Engineering Part A · doi:10.1089/ten.tea.2008.0545 · Cited by 349
Potential Use of Chitosan as a Cell Scaffold Material for Cartilage Tissue Engineering
Nettles, D. L., Elder, S. H., & Gilbert, J. A. (2002) · Tissue Engineering · doi:10.1089/107632702320934100 · Cited by 344
Nishiyama, Y., Nakamura, M., Henmi, C., Yamaguchi, K., Mochizuki, S., Nakagawa, H., & Takiura, K. (2009) · Journal of Biomechanical Engineering · doi:10.1115/1.3002759 · Cited by 322
Review: Bioprinting: A Beginning
Mironov, V., Reis, N., & Derby, B. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.631 · Cited by 319
Layer by Layer Three-dimensional Tissue Epitaxy by Cell-Laden Hydrogel Droplets
Moon, S., Hasan, S. K., Song, Y. S., Xu, F., Keles, H. O., Manzur, F., Mikkilineni, S., Hong, J. W., Nagatomi, J., Haeggstrom, E., et al. (2010) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2009.0179 · Cited by 305
Functional properties of protein isolates from beach pea (Lathyrus maritimus L.)
Chavan, U. D., McKenzie, D. B., & Shahidi, F. (2001) · Food Chemistry · doi:10.1016/s0308-8146(01)00123-6 · Cited by 285
Hoch, E., Schuh, C., Hirth, T., Tovar, G. E. M., & Borchers, K. (2012) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-012-4731-2 · Cited by 254
Self-citationEngineered Contractile Skeletal Muscle Tissue on a Microgrooved Methacrylated Gelatin Substrate
Hosseini, V., Ahadian, S., Ostrovidov, S., Camci-Unal, G., Chen, S., Kaji, H., Ramalingam, M., & Khademhosseini, A. (2012) · Tissue Engineering Part A · doi:10.1089/ten.tea.2012.0181 · Cited by 242
Tissue Engineering: The End of the Beginning
Lysaght, M. J., & Hazlehurst, A. L. (2004) · Tissue Engineering · doi:10.1089/107632704322791943 · Cited by 238
Tissue engineering with the aid of inkjet printers
Campbell, P. G., & Weiss, L. E. (2007) · Expert Opinion on Biological Therapy · doi:10.1517/14712598.7.8.1123 · Cited by 221
Bio-ink for on-demand printing of living cells
Ferris, C. J., Gilmore, K. J., Beirne, S., McCallum, D., Wallace, G. G., & in het Panhuis, M. (2013) · Biomater. Sci. · doi:10.1039/c2bm00114d · Cited by 214
All Gelatin Networks: 2. The Master Curve for Elasticity
Joly-Duhamel, C., Hellio, D., Ajdari, A., & Djabourov, M. (2002) · Langmuir · doi:10.1021/la020190m · Cited by 206
Atala, A. (2009) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2009.10.003 · Cited by 202
Protein‐water interactions and functional properties
Chou, D. H., & Morr, C. V. (1979) · Journal of the American Oil Chemists' Society · doi:10.1007/bf02671785 · Cited by 199
C57BL/6および129SvEvマウス間の大動脈弓形状,血行動態,プラークパッターンの相異
Hui, Z., Ji, Z., Jessica, S., Lopez-Bertoni, F., John, R. H., Nobuyo, M., & Morton, H. F. (2009) · Journal of Biomechanical Engineering · Cited by 131
Construction of 3D biological matrices using rapid prototyping technology
Maher, P. S., Keatch, R. P., Donnelly, K., Mackay, R. E., & Paxton, J. Z. (2009) · Rapid Prototyping Journal · doi:10.1108/13552540910960307 · Cited by 93
Maruguchi, T., Maruguchi, Y., Suzuki, S., Matsuda, K., Toda, K., & Isshiki, N. (1994) · Plastic & Reconstructive Surgery · doi:10.1097/00006534-199403000-00014 · Cited by 82
Maruguchi, T., Maruguchi, Y., Suzuki, S., Matsuda, K., Toda, K., & Isshiki, N. (1994) · Plastic & Reconstructive Surgery · doi:10.1097/00006534-199493030-00014 · Cited by 80
Cited by
Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels
Yue, K., Trujillo-de Santiago, G., Alvarez, M. M., Tamayol, A., Annabi, N., & Khademhosseini, A. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.08.045 · Cited by 3,146
“Cell-laden spot arrays were formed where the encapsulated porcine chondrocytes exhibited high viability within the hydrogel [61].”
3D bioprinting for biomedical devices and tissue engineering: A review of recent trends and advances
Derakhshanfar, S., Mbeleck, R., Xu, K., Zhang, X., Zhong, W., & Xing, M. (2018) · Bioactive Materials · doi:10.1016/j.bioactmat.2017.11.008 · Cited by 1,027
Gelatin-Methacryloyl Hydrogels: Towards Biofabrication-Based Tissue Repair
Klotz, B. J., Gawlitta, D., Rosenberg, A. J. W. P., Malda, J., & Melchels, F. P. W. (2016) · Trends in Biotechnology · doi:10.1016/j.tibtech.2016.01.002 · Cited by 846
A Review of 3D Printing Technologies for Soft Polymer Materials
Zhou, L., Fu, J., & He, Y. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000187 · Cited by 713
Strategies and Molecular Design Criteria for 3D Printable Hydrogels
Jungst, T., Smolan, W., Schacht, K., Scheibel, T., & Groll, J. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00303 · Cited by 712
Metadata
- Authors
- Hoch, E., Hirth, T., Tovar, G. E. M., & Borchers, K.
- Venue
- Journal of Materials Chemistry B
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 1
- Issue
- 41
- Pages
- 5675
- ISSN
- 2050-750X (ISSN-L)
- 2050-7518
- OpenAlex
- W2003408201
- Cited by
- 255
- References
- 47
- FWCI
- 5.14
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.