The DOI matches its Crossref record; 145 of the 145 references it cites were found in a registry or an index.
Alternative binders for sustainable electrochemical energy storage – the transition to aqueous electrode processing and bio-derived polymers
Open accessAbstract
The choice of the electrode binder strongly affects the environmental friendliness of electrochemical energy storage devices as reviewed herein.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrical energy storage for the grid: A battery of choices
Dunn, B., Kamath, H., & Tarascon, J.-M. (2011) · Science · doi:10.1126/science.1212741 · Cited by 15,072
Mussel-inspired surface chemistry for multifunctional coatings
Lee, H., Dellatore, S. M., Miller, W. M., & Messersmith, P. B. (2007) · Science · doi:10.1126/science.1147241 · Cited by 10,965
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Sodium-ion batteries: present and future
Hwang, J.-Y., Myung, S.-T., & Sun, Y.-K. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00776g · Cited by 5,305
Electrochemical Energy Storage for Green Grid
Yang, Z., Zhang, J., Kintner-Meyer, M. C. W., Lu, X., Choi, D., Lemmon, J. P., & Liu, J. (2011) · Chemical Reviews · doi:10.1021/cr100290v · Cited by 5,250
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
Lithium–Sulfur Batteries: Electrochemistry, Materials, and Prospects
Yin, Y., Xin, S., Guo, Y., & Wan, L. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201304762 · Cited by 2,707
A cost and resource analysis of sodium-ion batteries
Vaalma, C., Buchholz, D., Weil, M., & Passerini, S. (2018) · Nature Reviews Materials · doi:10.1038/natrevmats.2018.13 · Cited by 2,613
Self-citationCabana, J., Monconduit, L., Larcher, D., & Palacín, M. R. (2010) · Advanced Materials · doi:10.1002/adma.201000717 · Cited by 2,361
Alloy Negative Electrodes for Li-Ion Batteries
Obrovac, M. N., & Chevrier, V. L. (2014) · Chemical Reviews · doi:10.1021/cr500207g · Cited by 2,175
A Major Constituent of Brown Algae for Use in High-Capacity Li-Ion Batteries
Kovalenko, I., Zdyrko, B., Magasinski, A., Hertzberg, B., Milicev, Z., Burtovyy, R., Luzinov, I., & Yushin, G. (2011) · Science · doi:10.1126/science.1209150 · Cited by 1,802
Structural classification and properties of the layered oxides
Delmas, C., Fouassier, C., & Hagenmuller, P. (1980) · Physica B+C · doi:10.1016/0378-4363(80)90214-4 · Cited by 1,783
Lithium insertion into manganese spinels
Thackeray, M. M., David, W. I. F., Bruce, P. G., & Goodenough, J. B. (1983) · Materials Research Bulletin · doi:10.1016/0025-5408(83)90138-1 · Cited by 1,778
Olivetti, E. A., Ceder, G., Gaustad, G. G., & Fu, X. (2017) · Joule · doi:10.1016/j.joule.2017.08.019 · Cited by 1,572
Manganese oxides for lithium batteries
Thackeray, M. M. (1997) · Progress in Solid State Chemistry · doi:10.1016/s0079-6786(97)81003-5 · Cited by 1,475
The use of elemental sulfur as an alternative feedstock for polymeric materials
Chung, W. J., Griebel, J. J., Kim, E. T., Yoon, H., Simmonds, A. G., Ji, H. J., Dirlam, P. T., Glass, R. S., Wie, J. J., Nguyen, N. A., et al. (2013) · Nature Chemistry · doi:10.1038/nchem.1624 · Cited by 1,455
Improved capacity retention in rechargeable 4 V lithium/lithium-manganese oxide (spinel) cells
Gummow, R. J., de Kock, A., & Thackeray, M. M. (1994) · Solid State Ionics · doi:10.1016/0167-2738(94)90450-2 · Cited by 1,418
Wu, H., Yu, G., Pan, L., Liu, N., McDowell, M. T., Bao, Z., & Cui, Y. (2013) · Nature Communications · doi:10.1038/ncomms2941 · Cited by 1,378
Weyl Semimetals as Hydrogen Evolution Catalysts
Rajamathi, C. R., Gupta, U., Kumar, N., Yang, H., Sun, Y., Süß, V., Shekhar, C., Schmidt, M., Blumtritt, H., Werner, P., et al. (2017) · Advanced Materials · doi:10.1002/adma.201606202 · Cited by 1,358
Nickel‐Rich and Lithium‐Rich Layered Oxide Cathodes: Progress and Perspectives
Manthiram, A., Knight, J. C., Myung, S., Oh, S., & Sun, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501010 · Cited by 1,202
Advances in manganese-oxide ‘composite’ electrodes for lithium-ion batteries
Thackeray, M. M., Johnson, C. S., Vaughey, J. T., Ha N. LiCurrent address eVionyx Inc., & Hackney, S. A. (2005) · Journal of Materials Chemistry · doi:10.1039/b417616m · Cited by 1,109
Lithium sulfur batteries, a mechanistic review
Wild, M., O'Neill, L., Zhang, T., Purkayastha, R., Minton, G., Marinescu, M., & Offer, G. J. (2015) · Energy & Environmental Science · doi:10.1039/c5ee01388g · Cited by 1,107
Toward Efficient Binders for Li-Ion Battery Si-Based Anodes: Polyacrylic Acid
Magasinski, A., Zdyrko, B., Kovalenko, I., Hertzberg, B., Burtovyy, R., Huebner, C. F., Fuller, T. F., Luzinov, I., & Yushin, G. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am100871y · Cited by 1,101
Metal Oxide Surfaces and Their Interactions with Aqueous Solutions and Microbial Organisms
Brown, G. E., Henrich, V. E., Casey, W. H., Clark, D. L., Eggleston, C., Felmy, A., Goodman, D. W., Grätzel, M., Maciel, G., McCarthy, M. I., et al. (1999) · Chemical Reviews · doi:10.1021/cr980011z · Cited by 1,088
Global agriculture and nitrous oxide emissions
Reay, D. S., Davidson, E. A., Smith, K. A., Smith, P., Melillo, J. M., Dentener, F., & Crutzen, P. J. (2012) · Nature Climate Change · doi:10.1038/nclimate1458 · Cited by 1,086
Silicon‐Based Anodes for Lithium‐Ion Batteries: From Fundamentals to Practical Applications
Feng, K., Li, M., Liu, W., Kashkooli, A. G., Xiao, X., Cai, M., & Chen, Z. (2018) · Small · doi:10.1002/smll.201702737 · Cited by 1,042
Electrode–Electrolyte Interface in Li-Ion Batteries: Current Understanding and New Insights
Gauthier, M., Carney, T. J., Grimaud, A., Giordano, L., Pour, N., Chang, H.-H., Fenning, D. P., Lux, S. F., Paschos, O., Bauer, C., et al. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b01727 · Cited by 1,028
Removal of Interstitial H2O in Hexacyanometallates for a Superior Cathode of a Sodium-Ion Battery
Song, J., Wang, L., Lu, Y., Liu, J., Guo, B., Xiao, P., Lee, J.-J., Yang, X.-Q., Henkelman, G., & Goodenough, J. B. (2015) · Journal of the American Chemical Society · doi:10.1021/ja512383b · Cited by 966
Growth of native oxide on a silicon surface
Morita, M., Ohmi, T., Hasegawa, E., Kawakami, M., & Ohwada, M. (1990) · Journal of Applied Physics · doi:10.1063/1.347181 · Cited by 914
Ohzuku, T., Kitagawa, M., & Hirai, T. (1990) · Journal of The Electrochemical Society · doi:10.1149/1.2086552 · Cited by 875
An Amorphous Red Phosphorus/Carbon Composite as a Promising Anode Material for Sodium Ion Batteries
Kim, Y., Park, Y., Choi, A., Choi, N., Kim, J., Lee, J., Ryu, J. H., Oh, S. M., & Lee, K. T. (2013) · Advanced Materials · doi:10.1002/adma.201204877 · Cited by 854
Prospects for reducing the processing cost of lithium ion batteries
Wood, D. L., Li, J., & Daniel, C. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.11.019 · Cited by 827
Future generations of cathode materials: an automotive industry perspective
Andre, D., Kim, S.-J., Lamp, P., Lux, S. F., Maglia, F., Paschos, O., & Stiaszny, B. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00361j · Cited by 806
Review—Practical Issues and Future Perspective for Na-Ion Batteries
Kubota, K., & Komaba, S. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0151514jes · Cited by 775
Structure and performance of LiFePO4 cathode materials: A review
Zhang, W.-J. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.11.113 · Cited by 743
Prototype Sodium‐Ion Batteries Using an Air‐Stable and Co/Ni‐Free O3‐Layered Metal Oxide Cathode
Mu, L., Xu, S., Li, Y., Hu, Y., Li, H., Chen, L., & Huang, X. (2015) · Advanced Materials · doi:10.1002/adma.201502449 · Cited by 704
High Capacity and Rate Capability of Amorphous Phosphorus for Sodium Ion Batteries
Qian, J., Wu, X., Cao, Y., Ai, X., & Yang, H. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201209689 · Cited by 696
Visualization and Quantification of Electrochemical and Mechanical Degradation in Li Ion Batteries
Ebner, M., Marone, F., Stampanoni, M., & Wood, V. (2013) · Science · doi:10.1126/science.1241882 · Cited by 695
Sun, Y., Zhao, L., Pan, H., Lu, X., Gu, L., Hu, Y.-S., Li, H., Armand, M., Ikuhara, Y., Chen, L., et al. (2013) · Nature Communications · doi:10.1038/ncomms2878 · Cited by 683
Sharifi, T., Larsen, C., Wang, J., Kwong, W. L., Gracia‐Espino, E., Mercier, G., Messinger, J., Wågberg, T., & Edman, L. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600738 · Cited by 639
Zhou, T., Pang, W. K., Zhang, C., Yang, J., Chen, Z., Liu, H. K., & Guo, Z. (2014) · ACS Nano · doi:10.1021/nn503582c · Cited by 634
Ryou, M., Kim, J., Lee, I., Kim, S., Jeong, Y. K., Hong, S., Ryu, J. H., Kim, T., Park, J., Lee, H., et al. (2013) · Advanced Materials · doi:10.1002/adma.201203981 · Cited by 622
Interpenetrated Gel Polymer Binder for High‐Performance Silicon Anodes in Lithium‐ion Batteries
Song, J., Zhou, M., Yi, R., Xu, T., Gordin, M. L., Tang, D., Yu, Z., Regula, M., & Wang, D. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201401269 · Cited by 589
Li Metal‐Free Rechargeable LiMn2 O 4 / Carbon Cells: Their Understanding and Optimization
Guyomard, D., & Tarascon, J. M. (1992) · Journal of The Electrochemical Society · doi:10.1149/1.2069372 · Cited by 586
Cost Projection of State of the Art Lithium-Ion Batteries for Electric Vehicles Up to 2030
Berckmans, G., Messagie, M., Smekens, J., Omar, N., Vanhaverbeke, L., & Van Mierlo, J. (2017) · Energies · doi:10.3390/en10091314 · Cited by 578
Titanium‐Based Anode Materials for Safe Lithium‐Ion Batteries
Chen, Z., Belharouak, I., Sun, Y. ‐., & Amine, K. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200698 · Cited by 525
Recent progress and remaining challenges in sulfur-based lithium secondary batteries – a review
Bresser, D., Passerini, S., & Scrosati, B. (2013) · Chemical Communications · doi:10.1039/c3cc46131a · Cited by 514
Self-citationBuqa, H., Holzapfel, M., Krumeich, F., Veit, C., & Novák, P. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.03.073 · Cited by 513
Key Parameters Governing the Reversibility of Si/Carbon/CMC Electrodes for Li-Ion Batteries
Bridel, J.-S., Azaïs, T., Morcrette, M., Tarascon, J.-M., & Larcher, D. (2010) · Chemistry of Materials · doi:10.1021/cm902688w · Cited by 499
Higgins, T. M., Park, S.-H., King, P. J., Zhang, C. (., McEvoy, N., Berner, N. C., Daly, D., Shmeliov, A., Khan, U., Duesberg, G., et al. (2016) · ACS Nano · doi:10.1021/acsnano.6b00218 · Cited by 481
Update on anode materials for Na-ion batteries
Kang, H., Liu, Y., Cao, K., Zhao, Y., Jiao, L., Wang, Y., & Yuan, H. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta03181h · Cited by 468
Designing Air-Stable O3-Type Cathode Materials by Combined Structure Modulation for Na-Ion Batteries
Yao, H.-R., Wang, P.-F., Gong, Y., Zhang, J., Yu, X., Gu, L., OuYang, C., Yin, Y.-X., Hu, E., Yang, X.-Q., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b05176 · Cited by 466
A Robust Ion‐Conductive Biopolymer as a Binder for Si Anodes of Lithium‐Ion Batteries
Liu, J., Zhang, Q., Zhang, T., Li, J., Huang, L., & Sun, S. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201500589 · Cited by 452
Polysaccharide elasticity governed by chair–boat transitions of the glucopyranose ring
Marszalek, P. E., Oberhauser, A. F., Pang, Y.-P., & Fernandez, J. M. (1998) · Nature · doi:10.1038/25322 · Cited by 451
Hochgatterer, N. S., Schweiger, M. R., Koller, S., Raimann, P. R., Wöhrle, T., Wurm, C., & Winter, M. (2008) · Electrochemical and Solid-State Letters · doi:10.1149/1.2888173 · Cited by 449
A superior low-cost amorphous carbon anode made from pitch and lignin for sodium-ion batteries
Li, Y., Hu, Y., Li, H., Chen, L., & Huang, X. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta08601a · Cited by 447
Small things make a big difference: binder effects on the performance of Li and Na batteries
Chou, S.-L., Pan, Y., Wang, J.-Z., Liu, H.-K., & Dou, S.-X. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp02475c · Cited by 428
Redox reaction of Sn-polyacrylate electrodes in aprotic Na cell
Komaba, S., Matsuura, Y., Ishikawa, T., Yabuuchi, N., Murata, W., & Kuze, S. (2012) · Electrochemistry Communications · doi:10.1016/j.elecom.2012.05.017 · Cited by 418
Study on Polymer Binders for High-Capacity SiO Negative Electrode of Li-Ion Batteries
Komaba, S., Shimomura, K., Yabuuchi, N., Ozeki, T., Yui, H., & Konno, K. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp201691g · Cited by 405
Structural Fatigue in Spinel Electrodes in High Voltage (4 V) Li/Li[sub x]Mn[sub 2]O[sub 4] Cells
Thackeray, M. M. (1999) · Electrochemical and Solid-State Letters · doi:10.1149/1.1390617 · Cited by 404
Progress and perspectives in PTFE membrane: Preparation, modification, and applications
Feng, S., Zhong, Z., Wang, Y., Xing, W., & Drioli, E. (2018) · Journal of Membrane Science · doi:10.1016/j.memsci.2017.12.032 · Cited by 401
Li, J., Wu, Z., Lü, Y., Zhou, Y., Huang, Q., Huang, L., & Sun, S. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201701185 · Cited by 381
Zhu, W., Schmehl, D. R., Mullin, C. A., & Frazier, J. L. (2014) · PLoS ONE · doi:10.1371/journal.pone.0077547 · Cited by 375
Clasen, C., & Kulicke, W.-M. (2001) · Progress in Polymer Science · doi:10.1016/s0079-6700(01)00024-7 · Cited by 374
Chung, S., & Manthiram, A. (2014) · Advanced Materials · doi:10.1002/adma.201402893 · Cited by 364
Bommier, C., & Ji, X. (2018) · Small · doi:10.1002/smll.201703576 · Cited by 358
Toward Low-Cost, High-Energy Density, and High-Power Density Lithium-Ion Batteries
Li, J., Du, Z., Ruther, R. E., AN, S. J., David, L. A., Hays, K., Wood, M., Phillip, N. D., Sheng, Y., Mao, C., et al. (2017) · JOM · doi:10.1007/s11837-017-2404-9 · Cited by 350
Synthesis of hard carbon from argan shells for Na-ion batteries
Dahbi, M., Kiso, M., Kubota, K., Horiba, T., Chafik, T., Hida, K., Matsuyama, T., & Komaba, S. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta01394a · Cited by 347
Recent Developments of the Lithium Metal Anode for Rechargeable Non‐Aqueous Batteries
Zhang, K., Lee, G., Park, M., Li, W., & Kang, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600811 · Cited by 345
Carbon Coated ZnFe2O4 Nanoparticles for Advanced Lithium‐Ion Anodes
Bresser, D., Paillard, E., Kloepsch, R., Krueger, S., Fiedler, M., Schmitz, R., Baither, D., Winter, M., & Passerini, S. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201200735 · Cited by 340
Self-citationLife cycle assessment of sodium-ion batteries
Peters, J., Buchholz, D., Passerini, S., & Weil, M. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00640j · Cited by 340
Self-citationEnhanced Cycle Life of Si Anode for Li-Ion Batteries by Using Modified Elastomeric Binder
Liu, W., Yang, M., Wu, H., Chiao, S., & Wu, N. (2005) · Electrochemical and Solid-State Letters · doi:10.1149/1.1847685 · Cited by 336
Carboxymethyl Ethers of Cellulose and Starch – A Review
Heinze, T., & Koschella, A. (2005) · Macromolecular Symposia · doi:10.1002/masy.200550502 · Cited by 327
Jeong, Y. K., Kwon, T., Lee, I., Kim, T., Coşkun, A., & Choi, J. W. (2014) · Nano Letters · doi:10.1021/nl404237j · Cited by 318
Li2CO3 in LiNi0.8Co0.15Al0.05O2 cathodes and its effects on capacity and power
Zhuang, G., Chen, G., Shim, J., Song, X., Ross, P. N., & Richardson, T. J. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.02.030 · Cited by 312
Lithium‐ and Manganese‐Rich Oxide Cathode Materials for High‐Energy Lithium Ion Batteries
Wang, J., He, X., Paillard, E., Laszczynski, N., Li, J., & Passerini, S. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600906 · Cited by 309
Self-citationLithium-ion batteries : science and technologies
芳尾, 真., Brodd, R. J., & 小沢, 昭. (2009) · Springer eBooks · Cited by 303
Ionic liquids in supercapacitors
Brandt, A., Pohlmann, S., Varzi, A., Balducci, A., & Passerini, S. (2013) · MRS Bulletin · doi:10.1557/mrs.2013.151 · Cited by 296
Self-citationLow Cost, Environmentally Benign Binders for Lithium-Ion Batteries
Lux, S. F., Schappacher, F., Balducci, A., Passerini, S., & Winter, M. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3291976 · Cited by 289
Self-citationWang, J., Yao, Z., Monroe, C. W., Yang, J., & Nuli, Y. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201201847 · Cited by 266
Leveraging valuable synergies by combining alloying and conversion for lithium-ion anodes
Bresser, D., Passerini, S., & Scrosati, B. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02346k · Cited by 261
Self-citationCross-Linked Chitosan as an Efficient Binder for Si Anode of Li-ion Batteries
Chen, C., Lee, S. H., Cho, M., Kim, J., & Lee, Y. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b10673 · Cited by 260
Perspectives of automotive battery R&D in China, Germany, Japan, and the USA
Bresser, D., Hosoi, K., Howell, D., Li, H., Zeisel, H., Amine, K., & Passerini, S. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.02.039 · Cited by 249
Self-citationXu, J., Chou, S., Gu, Q., Liu, H., & Dou, S. X. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.033 · Cited by 241
LiFePO4 water-soluble binder electrode for Li-ion batteries
Guerfi, A., Kaneko, M., Petitclerc, M., Mori, M., & Zaghib, K. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.09.067 · Cited by 239
Carboxymethyl chitosan: A new water soluble binder for Si anode of Li-ion batteries
Lu, Y., Zhang, L., & Zhong, H. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.08.073 · Cited by 230
Dahbi, M., Nakano, T., Yabuuchi, N., Ishikawa, T., Kubota, K., Fukunishi, M., Shibahara, S., Son, J.-Y., Cui, Y.-T., Oji, H., et al. (2014) · Electrochemistry Communications · doi:10.1016/j.elecom.2014.04.014 · Cited by 228
Enhanced Cyclability for Sulfur Cathode Achieved by a Water-Soluble Binder
He, M., Yuan, L.-X., Zhang, W.-X., Hu, X.-L., & Huang, Y.-H. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp2043416 · Cited by 226
Development of a Green Supercapacitor Composed Entirely of Environmentally Friendly Materials
Dyatkin, B., Presser, V., Heon, M., Lukatskaya, M. R., Beidaghi, M., & Gogotsi, Y. (2013) · ChemSusChem · doi:10.1002/cssc.201300852 · Cited by 213
Use of natural binders and ionic liquid electrolytes for greener and safer lithium-ion batteries
Kim, G. T., Jeong, S. S., Joost, M., Rocca, E., Winter, M., Passerini, S., & Balducci, A. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.09.080 · Cited by 201
Self-citationDou, X., Hasa, I., Hekmatfar, M., Diemant, T., Behm, R. J., Buchholz, D., & Passerini, S. (2017) · ChemSusChem · doi:10.1002/cssc.201700628 · Cited by 194
Self-citationEnabling aqueous binders for lithium battery cathodes – Carbon coating of aluminum current collector
Doberdò, I., Loeffler, N., Laszczynski, N., Cericola, D., Penazzi, N., Bodoardo, S., Kim, G., & Passerini, S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.10.039 · Cited by 192
Self-citationIonic Liquids for Supercapacitors
Egashira, M. (2014) · Springer eBooks · doi:10.1007/978-1-4419-6996-5_509 · Cited by 192
Application of gelatin as a binder for the sulfur cathode in lithium–sulfur batteries
Sun, J., Huang, Y., Wang, W., Yu, Z., Wang, A., & Yuan, K. (2008) · Electrochimica Acta · doi:10.1016/j.electacta.2008.05.022 · Cited by 188
Dilatometric Investigations of Graphite Electrodes in Nonaqueous Lithium Battery Electrolytes
Winter, M., Wrodnigg, G. H., Besenhard, J. O., Biberacher, W., & Novák, P. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393548 · Cited by 188
Kwon, T., Jeong, Y. K., Lee, I., Kim, T., Choi, J. W., & Coskun, A. (2014) · Advanced Materials · doi:10.1002/adma.201402950 · Cited by 184
Lithium polyacrylate as a binder for tin–cobalt–carbon negative electrodes in lithium-ion batteries
Li, J., Le, D.-B., Ferguson, P. P., & Dahn, J. R. (2010) · Electrochimica Acta · doi:10.1016/j.electacta.2010.01.011 · Cited by 183
Rhodes, K., Dudney, N., Lara-Curzio, E., & Daniel, C. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3489374 · Cited by 173
Effects of CO2 in air on Li deintercalation from LiNi1−x−yCoxAlyO2
Matsumoto, K., Kuzuo, R., TAKEYA, K., & Yamanaka, A. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(99)00216-5 · Cited by 170
Adiponitrile-based electrochemical double layer capacitor
Brandt, A., Isken, P., Balducci, A., & Balducci, A. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.12.025 · Cited by 160
ZnFe2O4‐C/LiFePO4‐CNT: A Novel High‐Power Lithium‐Ion Battery with Excellent Cycling Performance
Varzi, A., Bresser, D., von Zamory, J., Müller, F., & Passerini, S. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201400054 · Cited by 155
Self-citationChai, L., Qu, Q., Zhang, L., et al. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.05.009 · Cited by 155
Preparation and performances of LiFePO4 cathode in aqueous solvent with polyacrylic acid as a binder
Cai, Z., Liang, Y., Li, W. S., et al. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.10.040 · Cited by 154
Natural cellulose as binder for lithium battery electrodes
Jeong, S., Böckenfeld, N., Balducci, A., Winter, M., & Passerini, S. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.09.102 · Cited by 151
Self-citationSauerteig, D., Ivanov, S. D., Reinshagen, H., & Bund, A. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.12.121 · Cited by 145
Design of Aqueous Processed Thick LiFePO[sub 4] Composite Electrodes for High-Energy Lithium Battery
Porcher, W., Lestriez, B., Jouanneau, S., et al. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3046129 · Cited by 144
Lee, J.-H., Paik, U., Hackley, V. A., & Choi, Y.-M. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.03.087 · Cited by 137
Rao, M., Song, X., & Cairns, E. J. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.01.047 · Cited by 134
Rudola, A., Du, K., & Balaya, P. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0701706jes · Cited by 134
Achari, A., Sahana, S., & Eswaramoorthy, M. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03856a · Cited by 131
Performance of LiNi1/3Mn1/3Co1/3O2/graphite batteries based on aqueous binder
Loeffler, N., von Zamory, J., Laszczynski, N., Doberdò, I., Kim, G., & Passerini, S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.10.018 · Cited by 126
Self-citationFunctional interface of polymer modified graphite anode
Komaba, S., Ozeki, T., & Okushi, K. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.09.092 · Cited by 126
Aslan, M., Weingarth, D., Jäckel, N., Atchison, J. S., Grobelsek, I., & Presser, V. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.05.031 · Cited by 124
Optimizing the surfactant for the aqueous processing of LiFePO4 composite electrodes
Porcher, W., Lestriez, B., Jouanneau, S., & Guyomard, D. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.11.088 · Cited by 123
Natural, cheap and environmentally friendly binder for supercapacitors
Böckenfeld, N., Jeong, S., Winter, M., Passerini, S., & Balducci, A. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.07.076 · Cited by 116
Self-citationXia, Y., & Yoshio, M. (1997) · Journal of Power Sources · doi:10.1016/s0378-7753(96)02538-4 · Cited by 104
Optimization of LiFePO4 Nanoparticle Suspensions with Polyethyleneimine for Aqueous Processing
Li, J., Armstrong, B. L., Kiggans, J., Daniel, C., & Wood, D. L. (2012) · Langmuir · doi:10.1021/la205157d · Cited by 98
Wu, Z., Yang, J., Yu, B., Shi, B., Zhao, C., & Yu, Z. (2016) · Rare Metals · doi:10.1007/s12598-016-0753-0 · Cited by 98
In Situ Coating of Li[Ni0.33Mn0.33Co0.33]O2 Particles to Enable Aqueous Electrode Processing
Loeffler, N., Kim, G., Mueller, F., Diemant, T., Kim, J., Behm, R. J., & Passerini, S. (2016) · ChemSusChem · doi:10.1002/cssc.201600353 · Cited by 97
Self-citationLi, J., Armstrong, B. L., Kiggans, J., Daniel, C., & Wood, D. L. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.037302jes · Cited by 96
Cao, P., Naguib, M., Du, Z., Stacy, E. W., Li, B., Hong, T., Xing, K., Voylov, D. N., Li, J., Wood, D. L., et al. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b13205 · Cited by 95
Moretti, A., Kim, G., Bresser, D., Renger, K., Paillard, E. E., Marassi, R., Winter, M., & Passerini, S. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.07.142 · Cited by 92
Self-citationComposite LiFePO4/AC high rate performance electrodes for Li-ion capacitors
Böckenfeld, N., Kühnel, R., Passerini, S., Winter, M., & Balducci, A. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.11.042 · Cited by 90
Self-citationKuenzel, M., Bresser, D., Diemant, T., Carvalho, D. V., Kim, G., Behm, R. J., & Passerini, S. (2017) · ChemSusChem · doi:10.1002/cssc.201702021 · Cited by 87
Self-citationPerformance study of commercial LiCoO2 and spinel-based Li-ion cells
Ramadass, P., Haran, B., White, R., & Popov, B. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00267-7 · Cited by 86
Park, Y., Oh, E., & Lee, S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.10.076 · Cited by 85
Bankole, O. E., Gong, C., & Lei, L. (2013) · Journal of Environment and Ecology · doi:10.5296/jee.v4i1.3257 · Cited by 85
Electrode compositions for carbon power supercapacitors
Bonnefoi, L., Simon, P., Fauvarque, J. F., et al. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(99)00069-5 · Cited by 85
New eco-friendly low-cost binders for Li-ion anodes
Versaci, D., Nasi, R., Zubair, U., Amici, J., Sgroi, M. F., Dumitrescu, M. A., Francia, C., Bodoardo, S., & Penazzi, N. (2017) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-017-3665-5 · Cited by 81
Li, J., Rulison, C. J., Kiggans, J., Daniel, C., & Wood, D. L. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.018208jes · Cited by 79
Preparation and electrochemical characterization of the porous sulfur cathode using a gelatin binder
Sun, J., Huang, Y., Wang, W., et al. (2008) · Electrochemistry Communications · doi:10.1016/j.elecom.2008.04.016 · Cited by 77
Kazzazi, A., Bresser, D., Birrozzi, A., von Zamory, J., Hekmatfar, M., & Passerini, S. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b03657 · Cited by 72
Self-citationLee, J., Kim, J.-S., Kim, Y., et al. (2008) · Ultramicroscopy · doi:10.1016/j.ultramic.2008.04.027 · Cited by 69
Improve Rate Capability of the Sulfur Cathode Using a Gelatin Binder
Wang, Q., Wang, W., Huang, Y., et al. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3583375 · Cited by 69
García, A. M., Culebras, M., Collins, M. N., et al. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.46217 · Cited by 67
Investigations on high energy lithium-ion batteries with aqueous binder
Wu, Q., Ha, S., Prakash, J., Dees, D. W., & Lu, W. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.09.068 · Cited by 55
Recycling supercapacitors based on shredding and mild thermal treatment
Jiang, G., & Pickering, S. J. (2015) · Waste Management · doi:10.1016/j.wasman.2015.10.027 · Cited by 48
Repeated Dose Toxicity Study (28 Days) in Rats and Mice with N-Methylpyrrolidone (NMP)
Malek, D. E., Malley, L. A., SLONE, T. W., Elliott, G. S., Kennedy, G. L., Mellert, W., Deckardt, K., Gembardt, C., Hildebrand, B., Murphy, S. R., et al. (1997) · Drug and Chemical Toxicology · doi:10.3109/01480549709011079 · Cited by 46
Binder-induced surface structure evolution effects on Li-ion battery performance
Rezvani, S. J., Pasqualini, M., Witkowska, A., Gunnella, R., Birrozzi, A., Minicucci, M., Rajantie, H., Copley, M., Nobili, F., & Cicco, A. D. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.10.195 · Cited by 40
Valvo, M., Liivat, A., Eriksson, H., Tai, C., & Edström, K. (2017) · ChemSusChem · doi:10.1002/cssc.201700070 · Cited by 38
A high voltage cathode prepared by using polyvinyl acetate as a binder
Prosini, P. P., Carewska, M., & Masci, A. (2015) · Solid State Ionics · doi:10.1016/j.ssi.2015.03.008 · Cited by 32
Varzi, A., Raccichini, R., Marinaro, M., Wohlfahrt‐Mehrens, M., & Passerini, S. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.03.072 · Cited by 31
Self-citationZhu, S., Yu, J., Yan, X., Zhao, E., Wang, Y., Sun, D., Jin, Y., & Kanamura, K. (2016) · Journal of Applied Electrochemistry · doi:10.1007/s10800-016-0957-x · Cited by 30
Haufroid, V., Jaeger, V. K., Jeggli, S., Eisenegger, R., Bernard, A., Friedli, D., Lison, D., & Hotz, P. (2013) · International Archives of Occupational and Environmental Health · doi:10.1007/s00420-013-0906-5 · Cited by 24
Loeffler, N., Kim, G., Passerini, S., Gutiérrez, C., Cendoya, I., de Meatza, I., Alessandrini, F., & Appetecchi, G. (2017) · ChemSusChem · doi:10.1002/cssc.201701087 · Cited by 13
Self-citation
Cited by
Asenbauer, J., Eisenmann, T., Kuenzel, M., Kazzazi, A., Chen, Z., & Bresser, D. (2020) · Sustainable Energy & Fuels · doi:10.1039/d0se00175a · Cited by 1,295
Self-citationLi, J., Fleetwood, J., Hawley, W. B., & Kays, W. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00565 · Cited by 895
Lithium-ion batteries – Current state of the art and anticipated developments
Armand, M., Axmann, P., Bresser, D., Copley, M., Edström, K., Ekberg, C., Guyomard, D., Lestriez, B., Novák, P., Petranikova, M., et al. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228708 · Cited by 888
Self-citationNeumann, J., Petranikova, M., Meeus, M., Gamarra, J. D., Younesi, R., Winter, M., & Nowak, S. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202102917 · Cited by 805
Advanced materials and technologies for hybrid supercapacitors for energy storage – A review
Afif, A., Rahman, S. M., Tasfiah Azad, A., Zaini, J., Islan, M. A., & Azad, A. K. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2019.100852 · Cited by 772
Metadata
- Authors
- Bresser, D., Buchholz, D., Moretti, A., Varzi, A., & Passerini, S.
- Venue
- Energy & Environmental Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2018
- Volume
- 11
- Issue
- 11
- Pages
- 3096-3127
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2896192476
- Cited by
- 640
- References
- 145
- FWCI
- 18.53
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.