The DOI matches its Crossref record; 57 of the 57 references it cites were found in a registry or an index.
Process–Structure–Properties in Polymer Additive Manufacturing via Material Extrusion: A Review
Open accessAbstract
This article provides a database of the mechanical properties of additively manufactured polymeric materials fabricated using material extrusion (e.g., fused filament fabrication (FFF)). Mechanical properties available in the literatures are consolidated in table form for different polymeric materials for FFF. Mechanical properties such as tensile, compressive, flexural, interlayer, fatigue, and creep properties are discussed in detail. The effects of printing parameters such as raster angle, infill, and specimen orientation on properties are also provided, together with a discussion of the possible causes (e.g., texture, microstructure changes, and defects) of anisotropy in properties. In addition to that, research gaps are identified which warrant further investigation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints
Thompson, M. K., Moroni, G., Vaneker, T., Fadel, G., Campbell, R. I., Gibson, I., Bernard, A., Schulz, J., Graf, P., Ahuja, B., et al. (2016) · CIRP Annals · doi:10.1016/j.cirp.2016.05.004 · Cited by 2,017
Metal Additive Manufacturing: A Review of Mechanical Properties
Lewandowski, J. J., & Seifi, M. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-032024 · Cited by 1,722
Ning, F., Cong, W., Qiu, J., Wei, J., & Wang, S. (2015) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2015.06.013 · Cited by 1,718
Chacón, J. M., Caminero, M. A., García-Plaza, E., & Núñez, P. J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.03.065 · Cited by 1,603
Mohamed, O. A., Masood, S. H., & Bhowmik, J. L. (2015) · Advances in Manufacturing · doi:10.1007/s40436-014-0097-7 · Cited by 1,481
A review of melt extrusion additive manufacturing processes: I. Process design and modeling
N. Turner, B., Strong, R., & A. Gold, S. (2014) · Rapid Prototyping Journal · doi:10.1108/rpj-01-2013-0012 · Cited by 1,450
Parametric appraisal of mechanical property of fused deposition modelling processed parts
Sood, A. K., Ohdar, R. K., & Mahapatra, S. S. (2010) · Materials & Design · doi:10.1016/j.matdes.2009.06.016 · Cited by 1,318
Effect of processing conditions on the bonding quality of FDM polymer filaments
Sun, Q., Rizvi, G. M., Bellehumeur, C. T., & Gu, P. (2008) · Rapid Prototyping Journal · doi:10.1108/13552540810862028 · Cited by 1,277
Tymrak, B. M., Kreiger, M., & Pearce, J. M. (2014) · Materials & Design · doi:10.1016/j.matdes.2014.02.038 · Cited by 1,244
Fused deposition modeling with polypropylene
Carneiro, O. S., Silva, A. F., & Gomes, R. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.06.053 · Cited by 851
Turner, B. N., & Gold, S. A. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-02-2013-0017 · Cited by 770
Lanzotti, A., Grasso, M., Staiano, G., & Martorelli, M. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-09-2014-0135 · Cited by 684
Ning, F., Cong, W., Hu, Y., & Wang, H. (2017) · Journal of Composite Materials · doi:10.1177/0021998316646169 · Cited by 632
Recent Progress in Additive Manufacturing of Fiber Reinforced Polymer Composite
Goh, G. D., Yap, Y. L., Agarwala, S., & Yeong, W. Y. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800271 · Cited by 621
Self-citationWeng, Z., Wang, J., Senthil, T., & Wu, L. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.04.045 · Cited by 609
Goh, G. D., Dikshit, V., Nagalingam, A. P., Goh, G. L., Agarwala, S., Sing, S. L., Wei, J., & Yeong, W. Y. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.10.021 · Cited by 604
Self-citationMechanical property characterization and simulation of fused deposition modeling Polycarbonate parts
Domingo-Espin, M., Puigoriol-Forcada, J. M., Garcia-Granada, A.-A., Llumà, J., Borros, S., & Reyes, G. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.06.074 · Cited by 535
Effect of Infill Parameters on Tensile Mechanical Behavior in Desktop 3D Printing
Fernandez-Vicente, M., Calle, W., Ferrandiz, S., & Conejero, A. (2016) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2015.0036 · Cited by 535
3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance
Yang, C., Tian, X., Liu, T., Cao, Y., & Li, D. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-08-2015-0098 · Cited by 515
Measurement of anisotropic compressive strength of rapid prototyping parts
Lee, C. S., Kim, S. G., Kim, H. J., & Ahn, S. (2007) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2006.11.095 · Cited by 504
The importance of carbon fiber to polymer additive manufacturing
Love, L. J., Kunc, V., Rios, O., Duty, C. E., Elliott, A. M., Post, B. K., Smith, R. J., & Blue, C. A. (2014) · Journal of Materials Research · doi:10.1557/jmr.2014.212 · Cited by 493
The effects of PLA color on material properties of 3-D printed components
Wittbrodt, B., & Pearce, J. M. (2015) · Additive manufacturing · doi:10.1016/j.addma.2015.09.006 · Cited by 473
Rankouhi, B., Javadpour, S., Delfanian, F., & Letcher, T. (2016) · Journal of Failure Analysis and Prevention · doi:10.1007/s11668-016-0113-2 · Cited by 457
Mohan, N., Senthil, P., Vinodh, S., & Jayanth, N. (2017) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1274490 · Cited by 457
Additive manufacturing in unmanned aerial vehicles (UAVs): Challenges and potential
Goh, G. D., Agarwala, S., Goh, G. L., Dikshit, V., Sing, S. L., & Yeong, W. Y. (2017) · Aerospace Science and Technology · doi:10.1016/j.ast.2016.12.019 · Cited by 413
Self-citationTorrado, A. R., Shemelya, C. M., English, J. D., Lin, Y., Wicker, R. B., & Roberson, D. A. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2015.02.001 · Cited by 406
Anisotropic Mechanical Properties of ABS Parts Fabricated by Fused Deposition Modelling
Ziemian, C., Sharma, M., & Ziemi, S. (2012) · Mechanical Engineering · doi:10.5772/34233 · Cited by 387
Effects of part build orientations on fatigue behaviour of FDM-processed PLA material
Afrose, M. F., Masood, S. H., Iovenitti, P., Nikzad, M., & Sbarski, I. (2016) · Progress in Additive Manufacturing · doi:10.1007/s40964-015-0002-3 · Cited by 358
Effects of layer thickness and binder saturation level parameters on 3D printing process
Vaezi, M., & Chua, C. K. (2011) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-010-2821-1 · Cited by 341
Material Property Testing of 3D-Printed Specimen in PLA on an Entry-Level 3D Printer
Letcher, T., & Waytashek, M. (2014) · Volume 2A: Advanced Manufacturing · doi:10.1115/imece2014-39379 · Cited by 325
Christiyan, K. G. J., Chandrasekhar, U., & Venkateswarlu, K. (2016) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/114/1/012109 · Cited by 302
Omar, O. M., MOHAMED, M., SyedH., Masood, ., & Bhowmik (2015) · Acta Scientiarum Naturalium Universitatis Sunyatseni · Cited by 302
Kishore, V., Ajinjeru, C., Nycz, A., Post, B., Lindahl, J., Kunc, V., & Duty, C. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2016.11.008 · Cited by 292
Gurrala, P. K., & Regalla, S. P. (2014) · Virtual and Physical Prototyping · doi:10.1080/17452759.2014.913400 · Cited by 290
Fatigue performance of fused filament fabrication PLA specimens
Gómez-Gras, G., Jerez‐Mesa, R., Travieso-Rodriguez, J. A., & Llumà, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.11.072 · Cited by 261
Onwubolu, G. C., & Rayegani, F. (2014) · International Journal of Manufacturing Engineering · doi:10.1155/2014/598531 · Cited by 252
Manufacturing and Security Challenges in 3D Printing
Zeltmann, S. E., Gupta, N., Tsoutsos, N. G., Maniatakos, M., Rajendran, J., & Karri, R. (2016) · JOM · doi:10.1007/s11837-016-1937-7 · Cited by 245
Ravi, A. K., Deshpande, A., & Hsu, K. H. (2016) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2016.08.007 · Cited by 217
In-situ monitoring of strain and temperature distributions during fused deposition modeling process
Kousiatza, C., & Karalekas, D. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.02.099 · Cited by 205
Costa, S. F., Duarte, F. M., & Covas, J. A. (2014) · Virtual and Physical Prototyping · doi:10.1080/17452759.2014.984042 · Cited by 203
Mechanical characterization of 3D printed polymers for fiber reinforced polymers processing
Türk, D.-A., Brenni, F., Zogg, M., & Meboldt, M. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.01.050 · Cited by 168
Parametric appraisal of fused deposition modelling process using the grey Taguchi method
Sood, A. K., Ohdar, R. K., & Mahapatra, S. S. (2010) · Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · doi:10.1243/09544054jem1565 · Cited by 163
In situ monitoring of FDM machine condition via acoustic emission
Wu, H., Wang, Y., & Yu, Z. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7809-4 · Cited by 162
Fatigue analysis of FDM materials
Lee, J., & Huang, A. (2013) · Rapid Prototyping Journal · doi:10.1108/13552541311323290 · Cited by 161
The Effect of Layer Orientation on the Mechanical Properties and Microstructure of a Polymer
Vega, V., Clements, J., Lam, T., Abad, A., Fritz, B., Ula, N. M., & Es-Said, O. S. (2010) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-010-9740-z · Cited by 138
An improved fused deposition modeling process for forming large-size thin-walled parts
Du, J., Wei, Z., Wang, X., Wang, J., & Chen, Z. (2016) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2016.04.005 · Cited by 123
Şerban, D. A., Weber, G., Marșavina, L., Silberschmidt, V. V., & Hufenbach, W. (2012) · Polymer Testing · doi:10.1016/j.polymertesting.2012.12.002 · Cited by 118
Structure–mechanical property relationship in fused deposition modelling
Rezayat, H., Zhou, W., Siriruk, A., Penumadu, D., & Babu, S. S. (2015) · Materials Science and Technology · doi:10.1179/1743284715y.0000000010 · Cited by 107
Faes, M. G. R., Ferraris, E., & Moens, D. (2016) · Procedia CIRP · doi:10.1016/j.procir.2016.02.313 · Cited by 104
Lederle, F., Meyer, F. S., Brunotte, G.-P., Kaldun, C., & Hübner, E. G. (2016) · Progress in Additive Manufacturing · doi:10.1007/s40964-016-0010-y · Cited by 84
Fatigue of injection molded and 3D printed polycarbonate urethane in solution
Miller, A. T., Safranski, D. L., Smith, K. E., Sycks, D. G., Guldberg, R. E., & Gall, K. (2016) · Polymer · doi:10.1016/j.polymer.2016.11.055 · Cited by 77
Nuchitprasitchai, S., Roggemann, M. C., & Pearce, J. M. (2017) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp1010002 · Cited by 73
A study of creep in polycarbonate fused deposition modelling parts
Salazar-Martín, A. G., Pérez, M. A., García‐Granada, A., Reyes, G., & Puigoriol-Forcada, J. M. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.01.008 · Cited by 71
Mohamed, O. A., Masood, S. H., & Bhowmik, J. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-12-2015-0198 · Cited by 60
Wear behavior of FDM parts fabricated by composite material feed stock filament
Boparai, K. S., Singh, R., & Singh, H. (2016) · Rapid Prototyping Journal · doi:10.1108/rpj-06-2014-0076 · Cited by 53
Equbal, A., Sood, A. K., Toppo, V., Ohdar, R., & Mahapatra, S. S. (2010) · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · doi:10.1243/13506501jet835 · Cited by 36
Mohamed, O. A., Masood, S. H., & Bhowmik, J. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.10.013 · Cited by 21
Cited by
Nazir, A., Gokcekaya, O., Md Masum Billah, K., Ertugrul, O., Jiang, J., Sun, J., & Hussain, S. (2023) · Materials & Design · doi:10.1016/j.matdes.2023.111661 · Cited by 773
Kabir, S. M. F., Mathur, K., & Seyam, A.-F. M. (2020) · Composite Structures · doi:10.1016/j.compstruct.2019.111476 · Cited by 678
Kafle, A., Luis, E., Silwal, R., Pan, H. M., Shrestha, P. L., & Bastola, A. K. (2021) · Polymers · doi:10.3390/polym13183101 · Cited by 587
Recent developments in polymers/polymer nanocomposites for additive manufacturing
Wu, H., Fahy, W. P., Kim, S., Kim, H., Zhao, N., Pilato, L., Kafi, A., Bateman, S., & Koo, J. H. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100638 · Cited by 531
Recent Developments in Fused Deposition Modeling-Based 3D Printing of Polymers and Their Composites
Rahim, T. N. A. T., Abdullah, A. M., & Md Akil, H. (2019) · Polymer Reviews · doi:10.1080/15583724.2019.1597883 · Cited by 452
Metadata
- Authors
- Goh, G. D., Yap, Y. L., Tan, H. K. J., Sing, S. L., Goh, G. L., & Yeong, W. Y.
- Venue
- Critical Reviews in Solid State and Materials Sciences
- Publisher
- Informa UK Limited
- Published
- 2019-01-24
- Volume
- 45
- Issue
- 2
- Pages
- 113-133
- ISSN
- 0161-1593 (ISSN-L)
- 1040-8436
- 1547-6561
- OpenAlex
- W2912027467
- Cited by
- 429
- References
- 57
- FWCI
- 21.29
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.