A Review of Bidirectional On-Board Chargers for Electric Vehicles
Open accessThe DOI matches its Crossref record; 155 of the 159 references it cites were found in a registry or an index; 19 of the 150 sources its claims cite were checked for support.
Abstract
The fast development of electric vehicles (EVs) provides significant opportunities to further utilize clean energies in the automotive. On-board chargers (OBCs) are widely used in EVs because of their simple installation and low cost. Limited space in the vehicle and short charging time require an OBC to be power-dense and highly efficient. Moreover, the possibility for EVs to deliver power back to the grid has increased the interest in bidirectional power flow solutions in the automotive market. This paper presents a comprehensive overview and investigation on the state-of-the-art solutions of bidirectional OBCs. It reviews the current status, including architectures and configurations, smart operation modes, industry standards, major components, and commercially available products. A detailed overview of the promising topologies for bidirectional OBCs, including two-stage and single-stage structures, is provided. Future trends and challenges for topologies, wide bandgap technologies, thermal management, system integration, and wireless charging systems are also discussed in this paper.
Overview
CoChat Summary
TL;DR
This review surveys bidirectional on-board chargers (OBCs) for electric vehicles, covering architectures, operation modes, standards, components, commercial products, and promising two-stage and single-stage topologies. It finds two-stage designs dominate commercial use, while single-stage high-power bidirectional OBCs remain mostly theoretical despite higher power-density potential.
Key findings
- Bidirectional OBCs enable V2G, V2H, V2L, and V2V; current use is mainly level-2 AC charging from 3.7 kW to 22 kW, while level-3 AC reverse power flow is mostly limited to 6.6–12 kW due to battery degradation and capacity.
- Commercial examples include Texas Instruments’ 6.6 kW SiC OBC at 97% efficiency, Delta-q’s 6.6 kW unit above 96% efficiency and 2.26 kW/L, Wolfspeed’s 6.6 kW unit at 3.3 kW/L and >96.5% peak efficiency, and Current Ways’ 20 kW modular SiC OBC above 97% efficiency and 3.3 kW/L.
- Most commercial bidirectional OBCs use a two-stage structure with a totem-pole PFC front end and CLLC or DAB DC/DC stage; PFC converters commonly exceed 98% efficiency, and DC/DC converters generally exceed 98%, but high power density at high power ratings remains challenging.
- Single-stage OBCs remove the bulky DC-link capacitor and can offer higher power density and lower cost, but most are theoretical, suffer low efficiency and complex control, and no high-power commercial product has been developed to date.
Methods
- Review paper: qualitative synthesis of state-of-the-art bidirectional OBCs, including architectures, configurations, smart operation modes, industry standards, major components, and commercially available products.
- Data sources: published literature, standards documents, and posted information from six commercial examples—Texas Instruments, Delta-q, Wolfspeed, Current Ways, Valeo Siemens, and Eaton—plus discussion of BYD, Tesla, Renault, BMW, Honda, and Nissan examples.
- Main analysis: comparative review of two-stage and single-stage topologies, PFC and DC/DC converter options, wide-bandgap devices, thermal management, system integration, and wireless charging trends, supported by summary tables.
Limitations
- Paper-stated: bidirectional OBCs face additional system cost, reliability burden, low power density, high weight, and complex smart-grid architecture implementation; V2G is still early-stage and not yet applied in the industry due to battery capacity and grid infrastructure limits.
- Paper-stated: frequent charging/discharging causes battery degradation—daily 2-hour frequency regulation is reported to consume 14.3% of battery capacity, and adding peak shaving can take up to 35.6%.
- Evident from text: as a review, it does not describe a systematic literature-search or selection method, and performance comparisons rely on manufacturer-posted or literature data with missing fields, such as power density not being shared by most manufacturers; no independent experimental validation is reported.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
15 Valid · 33 Not valid · 85 Not checked · 107 Own results and interpretations
Every source the paper cites for this claim was checked and supports it.
In the paper
“The high switching frequency of high power-dense bidirectional OBCs results in potential thermal management challenges because of higher switching loss and eddy current loss [72].”
What the sources say
- Supportedcites [72] [72] K. Gupta, C. Da Silva, M. Nasr, A. Assadi, H. Matsumoto, O. Trescases, and C. H. Amon, ''Thermal management strategies for a high-frequency, bi-directional, on-board electric vehicle charger,'' in Proc. 17th IEEE Intersociety Conf. Thermal Thermomechanical Phenomena Electron. Syst. (ITherm) , San Diego, CA, USA, May 2018, pp. 935 943. - source
The Introduction states that higher switching frequency causes thermal-management challenges through higher MOSFET switching losses and considerably higher eddy-current losses in heat sinks. This directly supports the cited sentence. (LLM, conf=0.95)
hedgedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
Every source the paper cites for this claim was checked and supports it.
In the paper
“Moreover, the V2G mode can help to reduce the grid current harmonics. The battery chargers are treated as variable impedance and eliminate the harmonics issue through appropriate ltering methods [45].”
What the sources say
- Supportedcites [45] [45] Z. A. Arfeen, A. B. Khairuddin, A. Munir, M. K. Azam, M. Faisal, and M. S. B. Arif, ''En route of electric vehicles with the vehicle to grid technique in distribution networks: Status and technological review,'' Energy Storage , vol. 2, no. 2, p. e115, Apr. 2020. - source
Section 5 (VEHICLE TO GRID) lists among V2G's advantages the explicit item 'reduce current harmonics' and states 'The inclusion of V2G can give better harmonics filtration'. Section 5.4 (Harmonic filtering) supplies the second half of the sentence: EV/power chargers 'act as a variable impedance for discrete frequencies and resolves the harmonic issues with an appropriate filtering method.' Both parts of the paraphrase are stated in our copy. (LLM, conf=0.90)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Most manufacturers study the totem-pole PFC topology as the front-end stage and DAB or CLLC topologies as the back-end stage.”
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“To this day, there are only a few bidirectional single-stage OBCs used in the automobile industry.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“However, no commercial product has been developed to this day.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
39 more claims
Create a free account to see all 240 claims and to verify the 7 references still open.
- It may state two separate claims as one. 112
- Probably not a substantial claim. 130
- The quote only partly states this claim. 2
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source doesn’t support the claim as written.
In the citing paper
“The study in [52] includes very few selected bidirectional OBCs, consisting of a report on the power density of four industrial OBCs.”
From On-Board Chargers for Electric Vehicles: A Comprehensive Performance and Efficiency Review (2024) · cites this paper as [52]
Checked by a reasoning model — may be wrong.
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ TABLE 4. Bidirectional PFC summary. · p. 8
“the converter achieves up to 98.86% ef ciency at a 1.6kW power level [78].”
§ TABLE 4. Bidirectional PFC summary. · p. 8
“| | Three-phase | CRM | 85-265 | 390 | 450-1000 | 1.6 | 98.7 | >15 | GaN | >0.99 |”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ C. STANDARDS · p. 4
“the total harmonic distortion (THD) of currents should be less than 7% to comply with the Institute of Electrical and Electronics Engineers (IEEE) 519 requirements [54].”
§ 1) EMI FILTERS · p. 5
“Recommended practice and requirements for stable harmonics limitation of the voltage and current (THD<8%)”
Citations
Cites
Yilmaz, M., & Krein, P. T. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2212917 · Cited by 3,118
A Review of Three-Phase Improved Power Quality AC–DC Converters
Singh, B., Singh, B. N., Chandra, A., Al-Haddad, K., Pandey, A., & Kothari, D. P. (2004) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2004.825341 · Cited by 1,728 · cited 1×
“In addition to single-phase PFC topologies, a lot of research is being undertaken on three-phase bidirectional PFC converters like the full-bridge converter [95], NPC [93], T-type [96] and matrix converter [97]–[99].”
BackgroundA review of single-phase improved power quality ac~dc converters
Singh, B., Singh, B. N., Chandra, A., Al-Haddad, K., Pandey, A., & Kothari, D. P. (2003) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2003.817609 · Cited by 1,297 · cited 1×
“For example, single-phase bidirectional full-bridge converters, and their variants are popular but suffer high power losses [85]–[87].”
BackgroundModern Trends in Inductive Power Transfer for Transportation Applications
Covic, G. A., & Boys, J. T. (2013) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2264473 · Cited by 1,263 · cited 1×
“Many methods are proposed like road built-in pad [160], pad array-based coupling technique [161], and segmental track strategy [162].”
MethodReview of Commercial GaN Power Devices and GaN-Based Converter Design Challenges
Jones, E. A., Wang, F. F., & Costinett, D. (2016) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2016.2582685 · Cited by 1,259 · cited 1×
“GaN semiconductors reaches up to 650V, these devices are becoming an attractive solution for OBCs [142].”
BackgroundUsing fleets of electric-drive vehicles for grid support
Tomić, J., & Kempton, W. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.03.010 · Cited by 1,018 · cited 1×
“A variable DC-link voltage of the PFC converter can mitigate this disadvantage, but the resonant tank needs to be carefully designed to cover that wide-voltage range [125], [126].”
BackgroundSchweizer, M., & Kolar, J. W. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2203151 · Cited by 1,006 · cited 14×
“[96] M. Schweizer and J. W. Kolar, ‘‘Design and implementation of a highly efficient three-level T-type converter for low-voltage applications,’’ IEEE Trans.”
BackgroundMethodInfluentialPerformance Evaluation of Bridgeless PFC Boost Rectifiers
Huber, L., Jang, Y., & Jovanovic, M. M. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2008.921107 · Cited by 865
Un-Noor, F., Padmanaban, S., Mihet-Popa, L., Mollah, M., & Hossain, E. (2017) · Energies · doi:10.3390/en10081217 · Cited by 809 · cited 1×
“However, they do not concentrate on the research and application of the bidirectional OBC [1], [13], [25], [26].”
BackgroundThe Essence of Three-Phase PFC Rectifier Systems—Part I
Kolar, J. W., & Friedli, T. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2197867 · Cited by 788
Research works printed but not linked: 21
- [39] X. Gong and J. Rangaraju, ''Taking charge of electric vehicles Both in the vehicle and on the grid,'' Texas Instrum., Dallas, TX, USA, Tech. Rep. SZZY007A, Jun. 2020, pp. 1 13. -
- [35] G. Yang, E. Draugedalen, T. Sorsdahl, H. Liu, and R. Lindseth, ''Design of high ef ciency high power density 10.5 kw three phase on-boardcharger for electric/hybrid vehicles,'' in Proc. Int. Exhib. Conf. Power Electron., Intell. Motion, Renew. Energy Manage. , Nuremberg, Germany, May 2016, pp. 1 7. -
- [23] Electrical and Electronics Technical Team Roadmap , UDD, Mumbai, India, Oct. 2017. -
- [58] IEEE Standard for Interconnection and Interoperability of Distributed Energy Resources With Associated Electric Power Systems Interfaces , Standard 1547-2018, Apr. 2018. -
- [57] Auto-Delivery , document GB/T 14549-1993, Mar. 1994. -
- [56] bar IEC Webstore , document IEC 61851-1:2017, Feb. 2017. -
- [55] Power Quality Requirements for Plug-In Electric Vehicle Chargers SAE International , Standard J2894/1B (WIP), Jun. 2020. -
- [54] IEEE Recommended Practice and Requirements for Harmonic Control in Electric Power Systems , Standard 519-2014, Mar. 2014. -
- [73] A. Goswami, ''Thermal management of on-board chargers in E-vehicles,'' Electron. Cooling , Aug. 2017. -
- [71] On Board Charger (OBC) LLC Converter , document TND6318/D, Sep. 2019. -
- [70] D. Giacomini, ''An overview and comparison of on board chargers topologies, semiconductors choices and synchronous recti cation advantages in automotive applications,'' In neon Italy s.r.l. ATV Group, Padua, Italy, Tech. Rep., May 2017, pp. 1 23. -
- [78] TIDM-1007 High Ef ciency GaN CCM Totem Pole Bridgeless Power Factor Correction (PFC) Reference Design , Taxes Instruments, Bengaluru, India, Mar. 2020. -
- [61] Electrically Propelled Vehicles , document ISO 6469-1:2019, Apr. 2019. -
- [63] S.-O. Plugs, ''Vehicle connectors and vehicle inlets conductive charging of electric vehicles Part 1, 2, 3,'' IEC Standard , vol. 62196, pp. 1 176, Jun. 2014. -
- [64] P. Contact, ''Charging technology for E-mobility Product overview 2017,'' Inspiring Innov. , vol. 2, pp. 1 56, Dec. 2014. <!-- image --> IEEEAccess" -
- [68] B. Johnson, ''Power factor correction design for on-board chargers in electric vehicles,'' Texas Instrum., Dallas, TX, USA, Tech. Rep. SLUA896, Jun. 2018, pp. 1 17. -
- 2019, Infineon
- [103] On Board Charger (OBC) Three-Phase PFC Converter , ON Semiconductor, Phoenix, AZ, USA, Mar. 2020. -
- [81] 6.6 kw High Power Density Bi-Directional EV on-Board Charger , Cree Power Applications, Durham, CA, USA, Jan. 2020. -
- 2013, On-Board Charger Specifications Eaton
- [119] TIDA-010054 Bi-Directional, Dual Active Bridge Reference Design for Level 3 Electric Vehicle Charging Stations , Texas Instrum., Dallas, TX, USA, Jun. 2019. -
Cited by
Items 201–300 of 379
Deb, S., & Pramanick, S. K. (2025) · Sadhana · doi:10.1007/s12046-025-02774-2 · Cited by 2
“PFC stage and DC–DC stage are integrated into this SS solution, eliminating the bulky electrolytic capacitor present in two-stage configuration [7, 8, 86].”
InfluentialAn overview of sustainable transportation: Solar modules integrated electric vehicles
Mekapati, S. R., & Choudhury, N. B. D. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.238424 · Cited by 2
A Review of Emerging Trends of GaN Power Semiconductor Applications in Onboard Chargers
Razali, M. R., Jamaludin, J., Bakar, A. S. A., Ismail, F., Za’im, R., & Krismadinata, K. (2025) · Journal of Circuits Systems and Computers · doi:10.1142/s0218126626300023 · Cited by 5
DC Off-Board Vehicle to Grid/Building/Home: A Survey and Gap Analysis
Engström, C., Rituraj, G., Linders, K., Esser, M., Shi, W., Tikka, V., & Mouli, G. R. C. (2026) · IEEE Open Journal of Vehicular Technology · doi:10.1109/ojvt.2026.3652429 · Cited by 3
“For charging levels 1 to 4, various topologies used in bidirectional on-board EV chargers are reviewed in [24], [25], and challenges for V2G operation are highlighted in [24].”
High-Power Isolated Bidirectional Three-port DC-DC Converter for Level-1 and Level-2 Charging
Snehalika, S., Patel, R., Panigrahi, C. K., & Rathore, A. K. (2022) · IEEE International Conference on Sustainable Energy and Future Electric Transportation (SEFET) · doi:10.1109/sefet55524.2022.9908861 · Cited by 3
“The power levels obtained are 2 kW and 12 kW which are on par with Level-1 and Level-2 charging [11].”
BackgroundMethodInfluentialA Five-Level Switch Clamped On-Board EV Charger With Wide Input Voltage Range
Kumar, G. K. N., Chaurasiya, A. N., Verma, A. K., & Sandeep, N. (2022) · IEEE International Conference on Sustainable Energy and Future Electric Transportation (SEFET) · doi:10.1109/sefet55524.2022.9908911 · Cited by 2
A Novel Hybrid Quadratic Buck Converter
Jude, G.-M., & Pop–Calimanu, I. (2022) · International Symposium on Electronics and Telecommunications (ISETC) · doi:10.1109/isetc56213.2022.10010225 · Cited by 2
“On the market various DC-DC topologies that have applications in different domains, like automobiles [1-2], telecommunications [3], renewable energy [4-5], computers, manufacturing and so on can be found.”
BackgroundDesigning inductive coils for wireless power transfer for electric vehicles
Praneeth, A. S., Harshavardhan, C., Triloknath, K., et al. (2023) · AIP conference proceedings · doi:10.1063/5.0178585 · Cited by 2
A Quasi-3-Level Active Neutral Point Clamped Converter for Onboard Chargers in Electric Vehicles
Iyer, A. K., Venugopal, P., & Soeiro, T. B. (2023) · IEEE Brazilian Power Electronics Conference and Southern Power Electronics Conference · doi:10.1109/spec56436.2023.10407959 · Cited by 3
“Some of these problems can be mitigated by using wide band-gap semiconductor devices which significantly reduce switching losses [1], [5], [10], however, their cost, reliability concern due to the maturity of the technologies and EMI-related challenges lead to slower adoption [1], [12].”
BackgroundNavigating the Challenges and Harnessing Emerging Trends in EV Charging Infrastructure Development
Pal, P., & Behera, R. K. (2023) · IEEE International Conference on Smart Technologies for Power, Energy and Control (STPEC) · doi:10.1109/stpec59253.2023.10431213 · Cited by 3
“TABLE V: Examples of commercially available On-Board Charger [1] The aforementioned structure can be thought of as one stage.”
BackgroundOnkar, K. A., & Beohar, A. (2024) · Electric Power Components and Systems · doi:10.1080/15325008.2024.2329329 · Cited by 3
“PEVs are the most probable replacement for combustor automobiles as their sales have increased [24].”
Switched Reluctance Motor-based EV Drive with Bidirectional Grid Interaction
Keshari, A., Raveendhra, D., Raju, B. N., Chaturvedi, P., Reddy, U. R., & Bobba, P. B. (2024) · IEEE International Conference on Sustainable Energy and Future Electric Transportation (SEFET) · doi:10.1109/sefet61574.2024.10717965 · Cited by 2
“Bidirectional OBCs would also allow EV owners to use their vehicles for other purposes, like vehicle-to-vehicle (V2V) operations in an emergency and vehicle-to-load (V2L) or vehicle-to-home (V2H) electricity in the event of a grid collapse [3].”
BackgroundSingle Stage Isolated Power Conditioning Unit for Plugin Electric Vehicles on-Board Charger
Ali, M. A., Singh, N. P., Raveendhra, D., Pendem, S. R., Raju, B. N., & Bobba, P. B. (2024) · IEEE International Conference on Sustainable Energy and Future Electric Transportation (SEFET) · doi:10.1109/sefet61574.2024.10718263 · Cited by 2
“Even so, there are numerous obstacles to overcome when using bidirectional OBCs, including increased system costs and reliability requirements, high weight and poor power density, and challenging smart grid architecture implementation [5].”
BackgroundWide Bandgap Devices: Enabling Technologies for Power Electronics-Based System
Shekhawat, R. S., Maurya, S. K., Singh, S., et al. (2025) · Lecture notes in electrical engineering · doi:10.1007/978-981-97-8464-6_3 · Cited by 2
A Comprehensive Assessment of Various Converter Topologies for Electric Vehicle and Grid Integration
Sharma, Y. K., Kidwai, M. S., Husain, M. A., Ansari, A. S., Kumar, N., & Bakhsh, F. I. (2025) · Recent Advances in Electrical & Electronic Engineering (Formerly Recent Patents on Electrical & Electronic Engineering) · doi:10.2174/0123520965349544241105031353 · Cited by 2
Derakhshan, S., & Lam, J. C. W. (2024) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce55643.2024.10861055 · Cited by 2
Maddi, K., Dubey, A., Parihar, K. S., Dar, J. A., Yadav, A. K., & Pathak, M. K. (2024) · IEEE International Conference on Power Electronics, Drives and Energy Systems · doi:10.1109/pedes61459.2024.10960980 · Cited by 2
“In the context of DC-DC converters, resonant converters, and DAB converters are predominantly used in EV applications [2].”
An Enhanced MPPT Control for PV with Grid Connected EV Charging
Elakya, A., Hemanth, M. S. K., Jeyavarsini, N. R., et al. (2025) · doi:10.1109/icmlas64557.2025.10968259 · Cited by 2
“In order to maintain optimal performance in the face of fluctuating environmental conditions like temperature and sunlight intensity, solar panels use MPPT techniques [4].”
Kanakri, H. M., dos Santos, E. C., & Rizkalla, M. (2025) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec48143.2025.10977543 · Cited by 2
“EV chargers can be classified based on the output power they deliver, two-stage EV chargers are classified into Level-1, Level-2, and Level-3 chargers [5], [6].”
Single-Phase Single-Stage Bi-Directional H6 PEV Charger for V2H Application
Rojchaya, S., Jindapetch, N., & Sengchuai, K. (2025) · International Electrical Engineering Congress (iEECON) · doi:10.1109/ieecon64081.2025.10987881 · Cited by 2
“They are widely viewed as one of the most effective strategies for reducing oil dependence, lowering greenhouse gas emissions, and enhancing energy conversion efficiency [1]-[2].”
Reconfigurable Switch-Control Scheme for a Multilevel T-Type DAB DC–DC Converter
Stowhas‐Villa, A., Rojas, C. A., Carmona, R., Wilson-Veas, A. H., Marin, J., Alcaide, A. M., Young, H. A., & Kouro, S. (2025) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2025.3592872 · Cited by 3
“Recent surveys underline the flexibility of these architectures, which are particularly attractive for fast-charging systems [4], [5], [6], [7], on-board systems [8], or both [9].”
SuperBox: A 4-in-1 Power Electronics Solution for Dual-Motor Electric Vehicles
Taha, W., Wang, Y., Anand, A., & Mohammadi, H. (2025) · IEEE Transportation Electrification Conference and Expo · doi:10.1109/itec63604.2025.11097934 · Cited by 2
“The power converters and their control systems convert and manage electrical energy to drive the vehicle, charge its battery, and optimize overall system performance [1], [2].”
Mallick, A., Pantazis, G., Khosravi, M., et al. (2025) · 2022 IEEE 18th International Conference on Automation Science and Engineering (CASE) · doi:10.1109/case58245.2025.11163818 · Cited by 2
“Accordingly, we select a Level-2 three-phase on-board charger with a 22 kW power rating ( P ), which is currently manufactured by Eaton and other major industry players [24].”
A Laboratory for Testing E-mobility Power Electronics
Cipolletta, G., D’Avanzo, G., Femine, A. D., Gallo, D., Landi, C., & Luiso, M. (2021) · IEEE International Workshop on Metrology for Automotive (MetroAutomotive) · doi:10.1109/metroautomotive50197.2021.9502852 · Cited by 2
Single Phase Power Quality Improved EV Charger using Zeta Function based Converter
Bhati, N., & Kalla, U. K. (2021) · IEEE International Conference on Smart Technologies for Power, Energy and Control (STPEC) · doi:10.1109/stpec52385.2021.9718669 · Cited by 3
An effective control structure of on-board battery charger for electric vehicles
Khadem, M., & Karami, M. (2022) · International Journal of Advances in Applied Sciences · doi:10.11591/ijaas.v11.i3.pp211-219 · Cited by 3
“The off-board systems have faster charging capability but their high cost and volume are the main disadvantages for many users [9], [16].”
BackgroundPower Quality Optimization in Dual Active Bridge Converters
Shakoor, A., Ul-Haq, A., & Iqbal, T. (2023) · IEEE Access · doi:10.1109/access.2023.3339554 · Cited by 2
“Whereas, high dv/dt limits the duty cycle and the switching frequency [8], [9], [10].”
BackgroundNew combined control strategy of on-board bidirectional battery chargers for electric vehicles
Hadji, K., Hartani, K., & Chikouche, T. M. (2023) · International Journal of Power Electronics and Drive Systems/International Journal of Electrical and Computer Engineering · doi:10.11591/ijpeds.v15.i1.pp303-311 · Cited by 5
“This paper discussed the current state of potential power converter architectures and configurations that include single-stage and two-stage smart operation modes, opportunities and difficulties in topology, temperature control, wireless charging, and integrated systems [5].”
BackgroundA Review of Structural Batteries with Carbon Fibers
Kwon, D.-J., & Nam, S. Y. (2021) · Applied Chemistry for Engineering · doi:10.14478/ace.2021.1037 · Cited by 2
Komeda, S., Takuma, S., Ohnuma, Y., Gondo, R., Maezaki, D., & Taguchi, N. (2023) · IEEJ Transactions on Industry Applications · doi:10.1541/ieejias.143.139 · Cited by 1
A new modulation strategy on isolated battery charger with wide input and output voltage range
Jou, H., Chen, F., Wu, J., Chiang, C. M., Su, L., & Chen, W. (2023) · IET Power Electronics · doi:10.1049/pel2.12474 · Cited by 1
Mitigation of Electromagnetic Interference from DC-DC Converters for Electric Vehicle Application
Chaudhuri, S., Mukherjee, I., & Hemamalini, S. (2024) · Lecture notes in electrical engineering · doi:10.1007/978-981-99-9833-3_14 · Cited by 1
An Improved Integrated Grid Inductor-Transformer Magnetic Structure for Single-Stage EV Charger
Nguyen, D. B.-H., Kieu, H.-P., Geda, M. G., & Choi, S. (2024) · International Power Electronics and Motion Control Conference (EPE-PEMC) · doi:10.1109/ipemc-ecceasia60879.2024.10567829 · Cited by 1
“The on-board charger (OBC) [1], [2] which is universally utilized enables EVs to be charged provided that the AC grid outlet is available.”
BackgroundFaisal, S., Goyal, G. R., Soni, B. P., et al. (2024) · IEEE International Conference on Sustainable Energy and Future Electric Transportation (SEFET) · doi:10.1109/sefet61574.2024.10718201 · Cited by 1
“Yuan et al. reported a comprehensive analysis of the state of the art in bidirectional OBCs including commercial cases, two-stage, one-stage configurations, one phase and three phase schemes [14].”
BackgroundModeling and Control Of Two Stages On-Board Charger For Electric Vehicle Applications
Elshehawi, M. H., El-Nemr, M. K., & Almozayen, M. A. (2024) · International Middle East Power Systems Conference (MEPCON) · doi:10.1109/mepcon63025.2024.10850277 · Cited by 1
Non-Invasive Approach of Emergency Rescue Assistance Through Vehicle-to-Vehicle AC Charging
Kamma, N., Srinivas, S., Ronanki, D., Surve, U., & Rao, S. E. (2024) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce55643.2024.10861269 · Cited by 1
“Hence, globally, EV/EVSE manufacturers are on the lookout for adopting suitable on-board chargers/off-board chargers that can meet the future requirements of the grid [4]–[7].”
RES and EV potential technology in Indian scenario
Suraj, S., Manjarekar, N. S., Barik, S., et al. (2025) · Elsevier eBooks · doi:10.1016/b978-0-323-95201-9.00007-x · Cited by 1
Wu, Y., Choksi, K., Defaz, S., et al. (2025) · IEEE Transactions on Electromagnetic Compatibility · doi:10.1109/temc.2025.3571381 · Cited by 1
“Design workflow for HDBCs [25], [26], [27]. the converter’s parasitics to diverse CM and differential-mode (DM) noise sources and propagation paths, making the design of robust, EMI-tolerant bidirectional converters significantly more complex than that of unidirectional converters [22].”
Magnetic Integration Applied to an Isolated Single-Stage AC–DC Converter
Barbosa, S. G., de Araújo, J. W. M., Friebe, J., Tofoli, F. L., & Oliveira, D. S. (2025) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2025.3588047 · Cited by 1
“Conversely, the second stage consists of a dc-dc converter providing galvanic isolation for safety issues [5].”
Xiao, H., Li, J., Yu, C., Yan, Y., Chen, Y., & Luo, Q. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3600288 · Cited by 2
“ConventionalOBCstypicallyemployatwo-stagestructure withfront-endPFCandisolateddc–dc. Theyexhibitinherent limitations:highcost,limitedefficiency,lowpowerdensity,and complexcontrol[8].”
Enhanced MPPT Control with Hardware Implementation for PV-Powered EV Charging
Elakya, A., Dejassree, S., Jeyavarsini, N. R., et al. (2025) · International Conference on Sustainable Computing and Data Communication Systems (ICSCDS) · doi:10.1109/icscds65426.2025.11167588 · Cited by 1
“Such limitations may lead to inefficient system operation and energy losses[2].”
Onboard Ev Charger Using Totem-Pole PFC and Isolated DC/DC Converter for Enhanced Power Quality
Baishya, D., Sarmah, M., Thakuria, M., Das, P., Kumar, A., & Hassan, F. (2025) · IEEE North-East India International Energy Conversion Conference and Exhibition (NE-IECCE) · doi:10.1109/ne-iecce64154.2025.11182992 · Cited by 1
“In contrast, on-board chargers are built into the vehicle and can be plugged directly into a single-phase or three-phase power supply, reducing the need for additional charging infrastructure [3].”
Tsuruta, R., Harada, S., Urakabe, T., et al. (2025) · doi:10.1109/ecce58356.2025.11260016 · Cited by 1
Mission Profile-Driven Lifetime Estimation and Optimization of GaN-Based EV Power Converters
Saha, S., & Das, M. (2025) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2025.3646158 · Cited by 1
“Among these, two-stage solutions have emerged as the most promising option [7], [8], [9].”
Design and Optimization of an 11 kW Integrated OBC-LDC EV Battery Charging System
Kwon, D.-H., Jeong, S.-W., Kim, J.-K., Lee, J.-Y., Lee, D.-W., & Youn, H.-S. (2025) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2025.3610746 · Cited by 3
Sora, J., Serban, I., & Musona, R. (2025) · International Conference on Renewable Energy Research and Applications (ICRERA) · doi:10.1109/icrera66237.2025.11284060 · Cited by 1
“To perform this task, several converters can be found in literature and one promising converter topology is the dual active bridge (DAB) converter [5].”
Srinivasan, P., Ram, N. S., Sadhasivam, M., & Kabilan, D. (2026) · International Energy Journal · doi:10.64289/iej.26.0103.9937356 · Cited by 1
A Non-Ecap Wide Range Bidirectional OBC With Multifunction Circuit
Tran, H. N., Nguyen, L. H. B., Vo, M. V., & Nguyen, T. D. (2026) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2026.3680312 · Cited by 1
“…vehicles utilization, the BOBC is introduced enabling EV to work as an energy storge device for resilience, household supply, or other purposes called V2X, that may include vehicle-to-load (V2L); vehicle-to-vehicle (V2V); vehicle-to-home (V2H); vehicle-to-grid (V2G) [3], [10], [11], [12], [13].”
A Phase-Shift Controlled Dual Active Bridge-based AC-DC Converter for Electric Vehicle Charger
Pradhan, R. K., & Tripathy, C. S. (2021) · International Conference on Computational Performance Evaluation (ComPE) · doi:10.1109/compe53109.2021.9751834 · Cited by 1
Fast Dynamic Control of V2X Enabled AC Connected Level-2 EV Chargers
Yadav, S., Roshan Raja Samuel., A., & Tripathi, A. (2022) · International Conference for Emerging Technology (INCET) · doi:10.1109/incet54531.2022.9825367 · Cited by 1
Capacitive Link Universal Converters for EV Powertrain
Wei, A., Lehman, B., Pakdelian, S., & Amirabadi, M. (2022) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce50734.2022.9947954 · Cited by 1
“6 kW charger in Nissan Leaf requires a 2700 μF capacitor [3], while the proposed converter requires only a 10 μF capacitor.”
MethodAn EV Integrated Bidirectional DC Fast Charger based on a Dual Wound Synchronous Machine
Ghumman, S. S., & Lehn, P. W. (2023) · IEEE Transportation Electrification Conference and Expo · doi:10.1109/itec55900.2023.10186963 · Cited by 1
Son, W.-J., & Lee, B. (2023) · International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia) · doi:10.23919/icpe2023-ecceasia54778.2023.10213861 · Cited by 1
Switching Loss Reduction for an Active Buffer DAB AC-DC Converter
Malanda, S. C., Arai, K., Komeda, S., Kifune, H., Takuma, S., & Ohnuma, Y. (2023) · European Conference on Power Electronics and Applications · doi:10.23919/epe23ecceeurope58414.2023.10264416 · Cited by 1
“INTRODUCTION Isolated single-phase AC-DC converters have been developed and studied as an on-board battery charger of electric vehicles [1], [2].”
BackgroundA Grid-Friendly Bidirectional Electric Vehicle Charger Based on CLC Resonant Converter
Ren, Z., Li, X., Xue, Q., Shang, J., Wei, N., & Ren, C. (2024) · Lecture notes in electrical engineering · doi:10.1007/978-981-97-1072-0_23 · Cited by 1
Energy efficient Onboard EV Charger Employing Partial Power Processing DC-DC Converter
Veerakgoundar, V., & Subramaniam, S. (2023) · IEEE Transportation Electrification Conference (ITEC-India) · doi:10.1109/itec-india59098.2023.10471465 · Cited by 1
“However, many researchers have proposed the AC-DC power conversion and associated controllers for achieving near unity power factor correction [2].”
BackgroundChaurasiya, S., & Singh, B. (2023) · IEEE India International Conference on Power Electronics · doi:10.1109/iicpe60303.2023.10474633 · Cited by 1
“An overview of both single and three phase interfaced EV charger topologies is discussed in [3]-[4].”
BackgroundDerakhshan, S., & Lam, J. C. W. (2024) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec48139.2024.10509506 · Cited by 1
Wide Output Range Soft-switched Single-Stage Dual Active Bridge Type AC-DC Boost PFC Converter
Sandhibigraha, H. B., & Iyer, V. M. (2024) · IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec48139.2024.10509426 · Cited by 1
“Some popular topologies are conventional boost PFC or a totem-pole PFC followed by a DC-DC converter such as a Phase-shifted full-bridge, resonant LLC or dual active bridge (DAB) type converter [1], [2].”
BackgroundAnalysis, Modeling and Implementation of Electric Vehicle Converter Configurations
Usha, S., Geetha, P., Geetha, A., et al. (2024) · Green energy and technology · doi:10.1007/978-3-031-18389-8_11 · Cited by 1
Shao, M., Zhang, Q., Wei, Z., Yang, L., & Yuping, H. (2024) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2024.3429369 · Cited by 1
“It should be noted that the power limit for ac charging stations is set at 40 kVA [2], [3].”
BackgroundLee, G.-Y., Kim, C.-M., Han, J., et al. (2024) · Electronics · doi:10.3390/electronics13193929 · Cited by 1
Constant Current Charging of EV Battery with Zero Back-Flow Power EPS Control Using DAB Converter
Katru, V. V., Pattnaik, M., & Sarkar, I. (2024) · IEEE International Conference on Sustainable Energy and Future Electric Transportation (SEFET) · doi:10.1109/sefet61574.2024.10717921 · Cited by 1
“[9].”
Alam, M. S., Singh, M., & Agarwal, P. (2024) · International Journal of Circuit Theory and Applications · doi:10.1002/cta.4358 · Cited by 2
“The voltage control schemes can predict the future behavior of the control variables, which is a crucial advantage over traditional control methods [16, 17].”
Single-Phase Bidirectional Wireless Power Transfer Architecture for V2G / G2V Applications
Bhoi, B., Dash, A. B. C., Mohanty, D., & Pradhan, J. K. (2024) · IEEE International Conference on Smart Power Control and Renewable Energy (ICSPCRE) · doi:10.1109/icspcre62303.2024.10674915 · Cited by 2
Yu, J., & Wanitwattanakosol, J. (2025) · Joint International Conference on Digital Arts, Media and Technology with ECTI Northern Section Conference on Electrical, Electronics, Computer and Telecommunications Engineering (ECTI DAMT & NCON) · doi:10.1109/ectidamtncon64748.2025.10962125 · Cited by 1
“And there were a few V2X (V2V and V2L) technologies have been applied in 2019, Chinese EV brand, BYD Tang, have implemented V2L and V2V functions on their EV on-board-charger [21].”
Smart Solutions for Electric Vehicles Using AI in Mobility and Infrastructure
Pudi, A., Raju, C. V. V. N., Varalatchoumy, M., Ramya, R., Premalatha, R., & Prasad, A. R. (2025) · Advances in civil and industrial engineering book series · doi:10.4018/979-8-3693-7663-8.ch010 · Cited by 1
Isolated single-phase onboard chargers for BEV/PHEV using active power decoupling technology
Amano, Y., Nishimura, K., Matsumori, H., et al. (2025) · IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec48143.2025.10977203 · Cited by 1
Three-Phase Off-Board Smart Bidirectional EV Charger for Peak Load Levelling
Gunjan, H., & Kumawat, M. (2024) · IEEE Power India International Conference · doi:10.1109/piicon63519.2024.10995027 · Cited by 2
“Developing a bidirectional charger for EVs represents a significant step towards addressing the challenges posed by the increase in adoption of Electric Vehicles [6].”
Single-Stage Soft-Switching AC-DC Converter for Bidirectional EV Charging
Prabakaran, S., & Devi, V. S. K. (2025) · International Conference on Inventive Systems and Control (ICISC) · doi:10.1109/icisc65841.2025.11188407 · Cited by 1
“[8].”
Design and Simulation of a Rectifier for Bidirectional Electric Vehicle Chargers
Bajwa, O. J., & Zhang, S. (2021) · IEEE Student Conference on Electric Machines and Systems (SCEMS) · doi:10.1109/scems52239.2021.9646170 · Cited by 2
Design of BUCK DC-DC Converter Portable Charging Application for Electric VehiclesPreprint
Kumar, S., Subbaraj, S., & Kingsly, S. (2023) · Research Square · doi:10.21203/rs.3.rs-3688523/v1 · Cited by 1
Komeda, S., & Yamashita, M. (2021) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce47101.2021.9595603
Electrical Vehicle to Vehicle Charging Without Charging Station
Chaudhary, S. K., Pachauri, P. S., seth, A., et al. (2022) · International Journal for Research in Applied Science and Engineering Technology · doi:10.22214/ijraset.2022.41114
Analysis of Various Topologies and Control Circuit used in Single Phase EV Charger
Tripathi, A., & Letha, S. S. (2022) · International Journal for Research in Applied Science and Engineering Technology · doi:10.22214/ijraset.2022.47112 · Cited by 1
A Novel Fourth-Order Buck-Boost Converter
Jude, G.-M., Pop–Calimanu, I., & Lascu, D. (2022) · International Power Electronics and Motion Control Conference (EPE-PEMC) · doi:10.1109/pemc51159.2022.9962844
“There are several dc-dc converters that can be applied in many domain-like renewable energies [1-2], industrial applications [3-4], automotive industry [5-6] or telecommunications [7].”
BackgroundViatkin, A. (2023) · Springer theses · doi:10.1007/978-3-031-24712-5_1
Fast Charging and Vehicle to Home Battery Management System Using MATLAB Simulink
Ahmad, A., Kumar, A., & Tiwari, P. M. (2023) · International Conference on Power, Instrumentation, Energy and Control (PIECON) · doi:10.1109/piecon56912.2023.10085852
Alzuguren, I., Garcia‐Bediaga, A., Avila, A., Rujas, A., & Vasić, M. (2023) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec43580.2023.10131550
A Novel Capacitor Voltage-Balancing Method for Multiwinding Resonant Converters
Zheng, P., Wang, C., & Bauman, J. (2023) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2023.3292879
Gupta, J., Singh, B., Chandra, A., & Al‐Haddad, K. (2023) · IEEE International Conference on Power Electronics and Drive Systems (PEDS) · doi:10.1109/peds57185.2023.10246543 · Cited by 1
“In double-stage BOBCs, the primary AC-DC transacts desired P/Q power between the DC link and grid while keeping AC side performance compliant with grid codes.”
BackgroundInfluentialEltokhy, M. A. R., Osman, F. A., & Hashem, A. Y. M. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4574094
Uthra, R. A., Jena, S., Majeed, S., et al. (2023) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2023-28-0176
A Two-stage Bi-directional Power Converter for EVs
Yan, R., Chen, X., Wang, D., et al. (2023) · International Conference on Power System Technology (POWERCON) · doi:10.1109/powercon58120.2023.10331571
Yan, R., Wang, D., Wang, X., et al. (2023) · International Conference on Electrical Machines and Systems (ICEMS) · doi:10.1109/icems59686.2023.10344907
Snehalika, S., Patel, R., & Panigrahi, C. K. (2024) · Indonesian Journal of Electrical Engineering and Computer Science · doi:10.11591/ijeecs.v33.i1.pp53-62
A High-Efficient Single-Phase Cascaded Three-Level AC/DC Converter with Variable DC Bus Voltage
Liu, H., He, Y., Hang, L., & Hu, J. (2023) · IEEE International Power Electronics and Application Symposium (PEAS) · doi:10.1109/peas58692.2023.10394737
OCPP-based Electric Vehicle AC fast charging solutions for Indian framework
Ravindran, S., Amal, S., Bhavya, Y. V., & Chandrasekar, V. (2023) · IEEE International Conference on Power Electronics, Smart Grid, and Renewable Energy (PESGRE) · doi:10.1109/pesgre58662.2023.10404448 · Cited by 1
“Based on the type of electrical current output used for EV charging, EVSE can be classified as AC and DC [5].”
Non-Active Power Mitigation of Partial Power Processing DC-DC Converter for Onboard EV Charger
Veerakgoundar, V., & Subramaniam, S. (2023) · IEEE Industrial Electronics Society Annual On-Line Conference (ONCON) · doi:10.1109/oncon60463.2023.10431187 · Cited by 1
“For this, many power converters have developed AC-DC conversion stages with higher power qualities and have been reviewed in [2].”
BackgroundPal, P., & Behera, R. K. (2023) · IEEE International Conference on Smart Technologies for Power, Energy and Control (STPEC) · doi:10.1109/stpec59253.2023.10431243
“Although the dual-stage architecture has traditionally been employed, the single-stage architecture [17] has recently garnered attention from researchers due to its appealing characteristics such as high power density, reduced cost, and improved reliability.”
BackgroundKanthi Mathew, K., & Abraham, D. M. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-18999-9.00006-5
Mobilidade Elétrica no Espírito Santo: Um projeto de Vanguarda
Nunes, R. B., Có, M. A., Andreão, R. V., Donadel, C. B., Brunoro, M., Nunes, W. T., Melo, V. S. D., Camargo, R. S., Monteiro, M. E., Santos, W. M. D., et al. (2024) · Edifes acadêmico eBooks · doi:10.36524/9788582638101
Analytical Model and Control for Three-Phase Single-Stage Rectifier for Battery Chargers
Perez, E., Lin-Shi, X., & Allard, B. (2024) · IEEE International Conference on Industrial Technology (ICIT) · doi:10.1109/icit58233.2024.10540776
“As indicated in [4], single-stage topologies may be the most suitable option for high-power chargers due to their low component count.”
BackgroundOptimizing Bidirectional AC Charging Efficiency of Multilevel Batteries: A Simulation Approach
Buberger, J., Grupp, W., Högerl, T., Wiedenmann, A., Estaller, J., Weyh, T., & Kuder, M. (2024) · International Scientific Conference on Electric Power Engineering · doi:10.1109/epe61521.2024.10559566
“Those OBCs are categorized into different levels and whether the OBC is intended for single-or three-phase mains [19].”
BackgroundNandini, V. (2024) · Research Square · doi:10.21203/rs.3.rs-4735082/v1
Comparing Various DC–DC Converters for Recharging EV Batteries
Gohil, S. N., Shah, H. A., & Mehta, U. (2024) · Algorithms for intelligent systems · doi:10.1007/978-981-97-3526-6_9 · Cited by 1
A Bidirectional ANN-Based On-Board LEV Charging System
Vasantha, M., & Mohan, V. C. J. (2024) · E3S Web of Conferences · doi:10.1051/e3sconf/202456402004 · Cited by 1
Size – Efficiency Multi-Objective Design of DC-Link Capacitor in Two-Stage Single-Phase Converters
Sahoo, B., & Chakraborty, S. (2024) · doi:10.1109/intelec60315.2024.10679031
“These systems find frequent application in various scenarios such as electric vehicle (EV) chargers and power supply units for data centers [1] [2].”
BackgroundBidirectional AC-DC Converter Simulation for V2X Power Transmission
Nelluru, H. K., Venkaiah, C., & Thangavelu, S. (2024) · IEEE International Conference on Sustainable Energy and Future Electric Transportation (SEFET) · doi:10.1109/sefet61574.2024.10718019
An Isolated Three-Phase DC-DC Converter Based on Hybridge Rectifier for Off-Board EV Chargers
de Oliveira, R. N. M., de Araújo, J. W. M., Rodrigues, R. O., Correia, W. B., Honório, D. D. A., Antunes, F. L. M., & Oliveira, D. S. (2024) · Energy Conversion Congress and Expo Europe (ECCE Europe) · doi:10.1109/ecceeurope62508.2024.10752054
“Alternative approaches based on a resonant DC/DC stage have also been proposed, showing promising outcomes in terms of power density and efficiency [5].”
Metadata
- Authors
- Yuan, J., Dorn-Gomba, L., Callegaro, A. D., Reimers, J., & Emadi, A.
- Affiliations
- McMaster University (CA)
- Venue
- IEEE Access
- Published
- 2021
- Volume
- 9
- Pages
- 51501-51518
- ISSN
- 2169-3536 (ISSN-L)
- OpenAlex
- W3147908447
- Cited by
- 390
- References
- 159
- Citations by year
- 2026: 48 · 2025: 94 · 2024: 100 · 2023: 83 · 2022: 49 · 2021: 16
- FWCI
- 18.20
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Locations
- IEEE Access (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Wireless Power Transfer Systems
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electric Vehicles and Infrastructure
- Keywords
- electric vehicles, bidirectional power flow, power electronics topology, two-stage converter, single-stage converter, wide bandgap semiconductors, thermal management, wireless charging, charging efficiency, power density
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol and qwen3.8-omni-flash).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.