A Review of Bidirectional On-Board Chargers for Electric Vehicles
Open accessThe DOI matches its Crossref record; 155 of the 159 references it cites were found in a registry or an index; 19 of the 150 sources its claims cite were checked for support.
Abstract
The fast development of electric vehicles (EVs) provides significant opportunities to further utilize clean energies in the automotive. On-board chargers (OBCs) are widely used in EVs because of their simple installation and low cost. Limited space in the vehicle and short charging time require an OBC to be power-dense and highly efficient. Moreover, the possibility for EVs to deliver power back to the grid has increased the interest in bidirectional power flow solutions in the automotive market. This paper presents a comprehensive overview and investigation on the state-of-the-art solutions of bidirectional OBCs. It reviews the current status, including architectures and configurations, smart operation modes, industry standards, major components, and commercially available products. A detailed overview of the promising topologies for bidirectional OBCs, including two-stage and single-stage structures, is provided. Future trends and challenges for topologies, wide bandgap technologies, thermal management, system integration, and wireless charging systems are also discussed in this paper.
Overview
CoChat Summary
TL;DR
This review surveys bidirectional on-board chargers (OBCs) for electric vehicles, covering architectures, operation modes, standards, components, commercial products, and promising two-stage and single-stage topologies. It finds two-stage designs dominate commercial use, while single-stage high-power bidirectional OBCs remain mostly theoretical despite higher power-density potential.
Key findings
- Bidirectional OBCs enable V2G, V2H, V2L, and V2V; current use is mainly level-2 AC charging from 3.7 kW to 22 kW, while level-3 AC reverse power flow is mostly limited to 6.6–12 kW due to battery degradation and capacity.
- Commercial examples include Texas Instruments’ 6.6 kW SiC OBC at 97% efficiency, Delta-q’s 6.6 kW unit above 96% efficiency and 2.26 kW/L, Wolfspeed’s 6.6 kW unit at 3.3 kW/L and >96.5% peak efficiency, and Current Ways’ 20 kW modular SiC OBC above 97% efficiency and 3.3 kW/L.
- Most commercial bidirectional OBCs use a two-stage structure with a totem-pole PFC front end and CLLC or DAB DC/DC stage; PFC converters commonly exceed 98% efficiency, and DC/DC converters generally exceed 98%, but high power density at high power ratings remains challenging.
- Single-stage OBCs remove the bulky DC-link capacitor and can offer higher power density and lower cost, but most are theoretical, suffer low efficiency and complex control, and no high-power commercial product has been developed to date.
Methods
- Review paper: qualitative synthesis of state-of-the-art bidirectional OBCs, including architectures, configurations, smart operation modes, industry standards, major components, and commercially available products.
- Data sources: published literature, standards documents, and posted information from six commercial examples—Texas Instruments, Delta-q, Wolfspeed, Current Ways, Valeo Siemens, and Eaton—plus discussion of BYD, Tesla, Renault, BMW, Honda, and Nissan examples.
- Main analysis: comparative review of two-stage and single-stage topologies, PFC and DC/DC converter options, wide-bandgap devices, thermal management, system integration, and wireless charging trends, supported by summary tables.
Limitations
- Paper-stated: bidirectional OBCs face additional system cost, reliability burden, low power density, high weight, and complex smart-grid architecture implementation; V2G is still early-stage and not yet applied in the industry due to battery capacity and grid infrastructure limits.
- Paper-stated: frequent charging/discharging causes battery degradation—daily 2-hour frequency regulation is reported to consume 14.3% of battery capacity, and adding peak shaving can take up to 35.6%.
- Evident from text: as a review, it does not describe a systematic literature-search or selection method, and performance comparisons rely on manufacturer-posted or literature data with missing fields, such as power density not being shared by most manufacturers; no independent experimental validation is reported.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
15 Valid · 33 Not valid · 85 Not checked · 107 Own results and interpretations
Every source the paper cites for this claim was checked and supports it.
In the paper
“The high switching frequency of high power-dense bidirectional OBCs results in potential thermal management challenges because of higher switching loss and eddy current loss [72].”
What the sources say
- Supportedcites [72] [72] K. Gupta, C. Da Silva, M. Nasr, A. Assadi, H. Matsumoto, O. Trescases, and C. H. Amon, ''Thermal management strategies for a high-frequency, bi-directional, on-board electric vehicle charger,'' in Proc. 17th IEEE Intersociety Conf. Thermal Thermomechanical Phenomena Electron. Syst. (ITherm) , San Diego, CA, USA, May 2018, pp. 935 943. - source
The Introduction states that higher switching frequency causes thermal-management challenges through higher MOSFET switching losses and considerably higher eddy-current losses in heat sinks. This directly supports the cited sentence. (LLM, conf=0.95)
hedgedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
Every source the paper cites for this claim was checked and supports it.
In the paper
“Moreover, the V2G mode can help to reduce the grid current harmonics. The battery chargers are treated as variable impedance and eliminate the harmonics issue through appropriate ltering methods [45].”
What the sources say
- Supportedcites [45] [45] Z. A. Arfeen, A. B. Khairuddin, A. Munir, M. K. Azam, M. Faisal, and M. S. B. Arif, ''En route of electric vehicles with the vehicle to grid technique in distribution networks: Status and technological review,'' Energy Storage , vol. 2, no. 2, p. e115, Apr. 2020. - source
Section 5 (VEHICLE TO GRID) lists among V2G's advantages the explicit item 'reduce current harmonics' and states 'The inclusion of V2G can give better harmonics filtration'. Section 5.4 (Harmonic filtering) supplies the second half of the sentence: EV/power chargers 'act as a variable impedance for discrete frequencies and resolves the harmonic issues with an appropriate filtering method.' Both parts of the paraphrase are stated in our copy. (LLM, conf=0.90)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Most manufacturers study the totem-pole PFC topology as the front-end stage and DAB or CLLC topologies as the back-end stage.”
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“To this day, there are only a few bidirectional single-stage OBCs used in the automobile industry.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“However, no commercial product has been developed to this day.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
39 more claims
Create a free account to see all 240 claims and to verify the 7 references still open.
- It may state two separate claims as one. 112
- Probably not a substantial claim. 130
- The quote only partly states this claim. 2
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source doesn’t support the claim as written.
In the citing paper
“The study in [52] includes very few selected bidirectional OBCs, consisting of a report on the power density of four industrial OBCs.”
From On-Board Chargers for Electric Vehicles: A Comprehensive Performance and Efficiency Review (2024) · cites this paper as [52]
Checked by a reasoning model — may be wrong.
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ TABLE 4. Bidirectional PFC summary. · p. 8
“the converter achieves up to 98.86% ef ciency at a 1.6kW power level [78].”
§ TABLE 4. Bidirectional PFC summary. · p. 8
“| | Three-phase | CRM | 85-265 | 390 | 450-1000 | 1.6 | 98.7 | >15 | GaN | >0.99 |”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ C. STANDARDS · p. 4
“the total harmonic distortion (THD) of currents should be less than 7% to comply with the Institute of Electrical and Electronics Engineers (IEEE) 519 requirements [54].”
§ 1) EMI FILTERS · p. 5
“Recommended practice and requirements for stable harmonics limitation of the voltage and current (THD<8%)”
Citations
Cites
Yilmaz, M., & Krein, P. T. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2212917 · Cited by 3,118
A Review of Three-Phase Improved Power Quality AC–DC Converters
Singh, B., Singh, B. N., Chandra, A., Al-Haddad, K., Pandey, A., & Kothari, D. P. (2004) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2004.825341 · Cited by 1,728 · cited 1×
“In addition to single-phase PFC topologies, a lot of research is being undertaken on three-phase bidirectional PFC converters like the full-bridge converter [95], NPC [93], T-type [96] and matrix converter [97]–[99].”
BackgroundA review of single-phase improved power quality ac~dc converters
Singh, B., Singh, B. N., Chandra, A., Al-Haddad, K., Pandey, A., & Kothari, D. P. (2003) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2003.817609 · Cited by 1,297 · cited 1×
“For example, single-phase bidirectional full-bridge converters, and their variants are popular but suffer high power losses [85]–[87].”
BackgroundModern Trends in Inductive Power Transfer for Transportation Applications
Covic, G. A., & Boys, J. T. (2013) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2264473 · Cited by 1,263 · cited 1×
“Many methods are proposed like road built-in pad [160], pad array-based coupling technique [161], and segmental track strategy [162].”
MethodReview of Commercial GaN Power Devices and GaN-Based Converter Design Challenges
Jones, E. A., Wang, F. F., & Costinett, D. (2016) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2016.2582685 · Cited by 1,259 · cited 1×
“GaN semiconductors reaches up to 650V, these devices are becoming an attractive solution for OBCs [142].”
BackgroundUsing fleets of electric-drive vehicles for grid support
Tomić, J., & Kempton, W. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.03.010 · Cited by 1,018 · cited 1×
“A variable DC-link voltage of the PFC converter can mitigate this disadvantage, but the resonant tank needs to be carefully designed to cover that wide-voltage range [125], [126].”
BackgroundSchweizer, M., & Kolar, J. W. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2203151 · Cited by 1,006 · cited 14×
“[96] M. Schweizer and J. W. Kolar, ‘‘Design and implementation of a highly efficient three-level T-type converter for low-voltage applications,’’ IEEE Trans.”
BackgroundMethodInfluentialPerformance Evaluation of Bridgeless PFC Boost Rectifiers
Huber, L., Jang, Y., & Jovanovic, M. M. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2008.921107 · Cited by 865
Un-Noor, F., Padmanaban, S., Mihet-Popa, L., Mollah, M., & Hossain, E. (2017) · Energies · doi:10.3390/en10081217 · Cited by 809 · cited 1×
“However, they do not concentrate on the research and application of the bidirectional OBC [1], [13], [25], [26].”
BackgroundThe Essence of Three-Phase PFC Rectifier Systems—Part I
Kolar, J. W., & Friedli, T. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2197867 · Cited by 788
Global Trends in High-Power On-Board Chargers for Electric Vehicles
Khaligh, A., & D'Antonio, M. (2019) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2019.2897050 · Cited by 652 · cited 2×
“OBC review is introduced in [5], which includes promising topologies, two-stage and single-stage architectures, OBCs commercial examples from suppliers, and future trends.”
BackgroundKhaligh, A., & Dusmez, S. (2012) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2012.2213104 · Cited by 630 · cited 1×
“A comprehensive topology survey of charging solutions of Plug-in EVs (PEVs), including on-board and off-board chargers, number of stages, power level, conductive and inductive charging technologies, and the semiconductor selection, is reviewed in [2].”
BackgroundHe, P., & Khaligh, A. (2017) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2016.2630927 · Cited by 501 · cited 1×
“To reduce the high current stress, a halfbridge LLC converter can be replaced by full-bridge LLC converters [108].”
BackgroundSingle-Phase On-Board Bidirectional PEV Charger for V2G Reactive Power Operation
Kisacikoglu, M. C., Kesler, M., & Tolbert, L. M. (2015) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2014.2360685 · Cited by 381 · cited 2×
“Also, the V2G technology can provide frequency and voltage regulation, which balances the supply and demand for active power and reactive power, respectively [43], [44].”
BackgroundAutomotive Traction Inverters: Current Status and Future Trends
Reimers, J., Dorn-Gomba, L., Mak, C., & Emadi, A. (2019) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2019.2897899 · Cited by 375 · cited 2×
“Some production vehicles already include mechanical integration of the OBC with other vehicle power electronics modules such that they share a common housing, reducing cost and weight [6].”
BackgroundSelf-citationUltraflat Interleaved Triangular Current Mode (TCM) Single-Phase PFC Rectifier
Marxgut, C., Krismer, F., Bortis, D., & Kolar, J. W. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2258941 · Cited by 345
Grid-Connected Integrated Battery Chargers in Vehicle Applications: Review and New Solution
Haghbin, S., Lundmark, S., Alakula, M., & Carlson, O. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2187414 · Cited by 345 · cited 1×
“Reviews of integrated battery charger topologies have also been conducted [151]–[153].”
BackgroundOperation Modes for the Electric Vehicle in Smart Grids and Smart Homes: Present and Proposed Modes
Monteiro, V., Pinto, J. G., & Afonso, J. L. (2016) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2015.2481005 · Cited by 307 · cited 1×
“Home-to-vehicle (H2V) and Vehicle-forgrid (V4G) are presented in [50] for future smart homes.”
BackgroundA Bidirectional Soft-Switched DAB-Based Single-Stage Three-Phase AC–DC Converter for V2G Application
Das, D., Weise, N., Basu, K., Baranwal, R., & Mohan, N. (2019) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2018.2886455 · Cited by 248 · cited 1×
“Therefore, this topology can be a promising solution for the OBC application because of its high power density and low system loss [133], [134].”
BackgroundA Power–Frequency Controller for Bidirectional Inductive Power Transfer Systems
Madawala, U. K., Neath, M., & Thrimawithana, D. J. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2174537 · Cited by 232 · cited 1×
“The control strategies like variable frequency and fixed frequency are presented to improve the operating efficiency in [157], [158].”
BackgroundThe viability of vehicle-to-grid operations from a battery technology and policy perspective
Uddin, K., Dubarry, M., & Glick, M. B. (2018) · Energy Policy · doi:10.1016/j.enpol.2017.11.015 · Cited by 231
Combined Phase Shift and Frequency Modulation of a Dual Active Bridge AC-DC Converter with PFC
Jauch, F., & Biela, J. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2515850 · Cited by 229 · cited 2×
“For example, [127]–[129] and [130] have proposed some AC/DC topologies with GaN or SiC technology and achieved high power factor and full ZVS operation through different methods.”
BackgroundMetwly, M. Y., Abdel-Majeed, M. S., Abdel-Khalik, A. S., Hamdy, R. A., Hamad, M. S., & Ahmed, S. (2020) · IEEE Access · doi:10.1109/access.2020.2992741 · Cited by 229 · cited 2×
“However, they do not concentrate on the research and application of the bidirectional OBC [1], [13], [25], [26].”
BackgroundWeise, N. D., Castelino, G., Basu, K., & Mohan, N. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2293112 · Cited by 223 · cited 1×
“Indeed, single-stage removes the DC-link capacitor and is comprised of solely an isolated AC/DC converter, which can provide higher power density and reduce the hardware cost [33].”
BackgroundInvestigations of 600-V GaN HEMT and GaN Diode for Power Converter Applications
Mitova, R., Ghosh, R., Mhaskar, U., Klikic, D., Wang, M.-X., & Dentella, A. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2286639 · Cited by 221 · cited 1×
“GaN has a lower on-resistance, which minimizes the volume and values of the passive components, while keeping the same current capability [141].”
BackgroundHigh-Efficiency High-Density Critical Mode Rectifier/Inverter for WBG-Device-Based On-Board Charger
Liu, Z., Li, B., Lee, F. C., & Li, Q. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2716873 · Cited by 221 · cited 1×
“6kW OBC, which uses 650V GaN and 1200V SiC devices [79], [80].”
MethodCirculating Current and ZVS-on of a Dual Active Bridge DC-DC Converter: A Review
Shao, S., Chen, H., Wu, X., Zhang, J., & Sheng, K. (2019) · IEEE Access · doi:10.1109/access.2019.2911009 · Cited by 200 · cited 1×
“Moreover, single-phase parallel dual DAB topologies [113], [114] and three-phase CLLC topologies [115], [116] have been studied.”
BackgroundUn-Noor, F., Padmanaban, S., Mihet‐Popa, L., et al. (2017) · Preprints.org · doi:10.20944/preprints201705.0090.v1 · Cited by 194
Bi-directional charging topologies for plug-in hybrid electric vehicles
Erb, D. C., Onar, O. C., & Khaligh, A. (2010) · 2010 Twenty-Fifth Annual IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2010.5433520 · Cited by 193
Review of charging power levels and infrastructure for plug-in electric and hybrid vehicles
Yilmaz, M., & Krein, P. T. (2012) · 2012 IEEE International Electric Vehicle Conference · doi:10.1109/ievc.2012.6183208 · Cited by 193
Shi, C., Tang, Y., & Khaligh, A. (2017) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2017.2729345 · Cited by 187 · cited 2×
“Torque production can be eliminated by restricting it to high frequency components with a zero average [146], phase transposition in the charging mode [148] or through flux cancellation with split winding machines [154].”
BackgroundLu, J., Bai, K., Taylor, A. R., Liu, G., Brown, A., Johnson, P. M., & McAmmond, M. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2769661 · Cited by 185 · cited 2×
“Therefore, it can use components with a lower current ratings [40], [41].”
BackgroundAn Electrolytic Capacitorless Bidirectional EV Charger for V2G and V2H Applications
Kwon, M., & Choi, S. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2630711 · Cited by 177 · cited 1×
“A single-stage OBC topology presented in [52] can achieve seamlessV2G andV2Hoperations.”
BackgroundJafari, M., Gauchia, A., Zhao, S., Zhang, K., & Gauchia, L. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2017.2764320 · Cited by 177 · cited 1×
“For example, it can balance the load by shaving peak and filling valley according to the grid demand [42].”
BackgroundReflexive Field Containment in Dynamic Inductive Power Transfer Systems
Lee, K., Pantic, Z., & Lukic, S. M. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2287262 · Cited by 173 · cited 1×
“The double couple method is presented in [163], but it fails because of high-frequency transmission.”
MethodThe essence of three-phase PFC rectifier systems
Kolar, J. W., & Friedli, T. (2011) · 2011 IEEE 33rd International Telecommunications Energy Conference (INTELEC) · doi:10.1109/intlec.2011.6099838 · Cited by 172
A Three-Phase Integrated Onboard Charger for Plug-In Electric Vehicles
Shi, C., Tang, Y., & Khaligh, A. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2727398 · Cited by 159 · cited 1×
“Topologies taking advantage of the conventional three-phase wyeconnected machine found in EVs have been proposed, for both single-phase [146] and three-phase [147] solutions.”
BackgroundShen, Y., Zhao, W., Chen, Z., & Cai, C. (2018) · IEEE Access · doi:10.1109/access.2018.2811760 · Cited by 157
Marxgut, C., Biela, J., & Kolar, J. W. (2010) · The 2010 International Power Electronics Conference - ECCE ASIA - · doi:10.1109/ipec.2010.5542048 · Cited by 157 · cited 1×
“Due to high conduction loss of conventional boost PFC converters, bridgeless interleaved totem-pole PFC are investigated [100]–[102].”
BackgroundA Novel Three-Level CLLC Resonant DC–DC Converter for Bidirectional EV Charger in DC Microgrids
Xuan, Y., Yang, X., Chen, W., Liu, T., & Hao, X. (2021) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2020.2972446 · Cited by 156 · cited 1×
“Moreover, single-phase parallel dual DAB topologies [113], [114] and three-phase CLLC topologies [115], [116] have been studied.”
BackgroundHe, P., Mallik, A., Sankar, A., & Khaligh, A. (2019) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2018.2881276 · Cited by 154 · cited 1×
“21kW/L [123], [124], as shown in Table 5.”
BackgroundModeling and Feasibility Analysis of Quasi-Dynamic WPT System for EV Applications
Mohamed, A. A. S., Lashway, C. R., & Mohammed, O. A. (2017) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2017.2682111 · Cited by 153 · cited 4×
“DWC charges the EV with the specific charging lane, which can prolong the EV range and reduce the battery size.”
BackgroundInfluentialKim, J., Kim, D.-H., & Park, Y.-J. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2365751 · Cited by 152 · cited 1×
“Many methods are proposed like road built-in pad [160], pad array-based coupling technique [161], and segmental track strategy [162].”
MethodAn integrated fast battery charger for Electric Vehicle
Lacroix, S., Laboure, E., & Hilairet, M. (2010) · 2010 IEEE Vehicle Power and Propulsion Conference · doi:10.1109/vppc.2010.5729063 · Cited by 150 · cited 1×
“Torque production can be eliminated by restricting it to high frequency components with a zero average [146], phase transposition in the charging mode [148] or through flux cancellation with split winding machines [154].”
BackgroundBidirectional battery charger with Grid-to-Vehicle, Vehicle-to-Grid and Vehicle-to-Home technologies
Pinto, J. G., Monteiro, V., Goncalves, H., Exposto, B., Pedrosa, D., Couto, C., & Afonso, J. L. (2013) · IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society · doi:10.1109/iecon.2013.6700108 · Cited by 139 · cited 1×
“outage or to supply other loads without a grid connection respectively [49].”
BackgroundZhang, Z., Liu, C., Wang, M., Si, Y., Liu, Y., & Lei, Q. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.2980313 · Cited by 137 · cited 1×
“rical phase-shifted DAB [109] or CLLC resonant converters [110]–[112] are more suitable for bidirectional DC/DC converters.”
BackgroundHybrid PWM-Resonant Converter for Electric Vehicle On-Board Battery Chargers
Lee, I.-O. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2456635 · Cited by 134 · cited 1×
“The on-board charger (OBC) provides the ability for EVs to be charged directly from the AC grid and is widely used in automotive industry for its convenience, especially compared to the high-cost and large-volume of off-board charging solutions [7]–[10].”
BackgroundAn Isolated/Bidirectional PWM Resonant Converter for V2G(H) EV On-Board Charger
Lee, B.-K., Kim, J.-P., Kim, S.-G., & Lee, J.-Y. (2017) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2017.2678532 · Cited by 125 · cited 1×
“A downstream isolated DC/DC topology based on the PWM resonant converter is presented in [9], which can provide V2G”
BackgroundAzad, A. N., Echols, A., Kulyukin, V. A., Zane, R., & Pantic, Z. (2019) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2018.2870339 · Cited by 125 · cited 1×
“Some structures and shapes of the coil are proposed in [157], [159] for better robustness, cost-effectiveness, and minimization of the stray magnetic field.”
BackgroundKandlikar, S. G., & Hayner, C. N. (2009) · Heat Transfer Engineering · doi:10.1080/01457630902837343 · Cited by 124 · cited 1×
“Additionally, heat pipes are becoming an attractive solution for automotive cooling because of its high heat transfer, low thermal resistance and low cost [145].”
BackgroundA Novel Multilevel Multioutput Bidirectional Active Buck PFC Rectifier
Vahedi, H., & Al-Haddad, K. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2555279 · Cited by 122 · cited 1×
“Most EVs use two-stage OBCs in the automotive industry [30]–[32].”
BackgroundAn Improved Generalized Average Model of DC–DC Dual Active Bridge Converters
Mueller, J. A., & Kimball, J. W. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2797966 · Cited by 118 · cited 1×
“bidirectional DC/DC converters in the OBC market [117], [118].”
BackgroundReactive power operation analysis of a single-phase EV/PHEV bidirectional battery charger
Kisacikoglu, M. C., Ozpineci, B., & Tolbert, L. M. (2011) · International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia) · doi:10.1109/icpe.2011.5944614 · Cited by 108 · cited 1×
“6kW to 12 kW, due to battery degradation and capacity [21], [22].”
BackgroundWang, X., Jiang, C., Lei, B., Teng, H., Bai, H. K., & Kirtley, J. L. (2016) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2016.2575921 · Cited by 107
Huber, L., Irving, B. T., & Jovanović, M. M. (2009) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2018560 · Cited by 106 · cited 1×
“Most EVs use two-stage OBCs in the automotive industry [30]–[32].”
BackgroundLi, B., Lee, F. C., Li, Q., & Liu, Z. (2017) · 2017 IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2017.7931228 · Cited by 105
On-Board Single-Phase Integrated Electric Vehicle Charger With V2G Functionality
Semsar, S., Soong, T., & Lehn, P. W. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.2982326 · Cited by 102 · cited 2×
“However, they do not concentrate on the research and application of the bidirectional OBC [1], [13], [25], [26].”
BackgroundSingle-Stage Resonant Battery Charger With Inherent Power Factor Correction for Electric Vehicles
Li, S., Deng, J., & Mi, C. C. (2013) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2013.2265704 · Cited by 100 · cited 2×
“Therefore, most commercial single-stage OBCs are used in low power levels and unidirectional application [136], [137].”
BackgroundAssadi, S. A., Matsumoto, H., Moshirvaziri, M., Nasr, M., Zaman, M. S., & Trescases, O. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2939301 · Cited by 93 · cited 1×
“bidirectional DC/DC converters in the OBC market [117], [118].”
BackgroundImproving Onboard Converter Reliability for More Electric Aircraft With Lifetime-Based Control
Raveendran, V., Andresen, M., & Liserre, M. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2889626 · Cited by 91 · cited 1×
“[171] offers a modular power converter to obtain reliable operations.”
BackgroundImplementation of a Transformerless Common-Mode Active Filter for Offline Converter Systems
Heldwein, M. L., Ertl, H., Biela, J., & Kolar, J. W. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2032204 · Cited by 90 · cited 1×
“higher frequencies, thus reducing the size of CM filter inductors [65].”
BackgroundA bridgeless totem-pole interleaved PFC converter for plug-in electric vehicles
Tang, Y., Ding, W., & Khaligh, A. (2016) · 2016 IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2016.7467909 · Cited by 88 · cited 1×
“Due to high conduction loss of conventional boost PFC converters, bridgeless interleaved totem-pole PFC are investigated [100]–[102].”
BackgroundA Single- and Three-Phase Grid Compatible Converter for Electric Vehicle On-Board Chargers
Zhao, H. L., Shen, Y., Ying, W., Ghosh, S. S., Ahmed, M. R., & Long, T. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2956653 · Cited by 85 · cited 1×
“filter could be used to store the energy, but it also requires more switches and passive components [38].”
BackgroundRepetitive Compensation of Fluctuating DC Link Voltage for Railway Traction Drives
Ouyang, H., Zhang, K., Zhang, P., Kang, Y., & Xiong, J. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2105283 · Cited by 83 · cited 1×
“to reduce the output current distortion, but it causes high voltage stress and over modulation [37].”
BackgroundPerformance Evaluation of Bridgeless PFC Boost Rectifiers
Huber, L., Jang, Y., & Jovanović, M. M. (2007) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apex.2007.357510 · Cited by 83
On-board bidirectional battery chargers topologies for plug-in hybrid electric vehicles
Fahem, K., Chariag, D. E., & Sbita, L. (2017) · 2017 International Conference on Green Energy Conversion Systems (GECS) · doi:10.1109/gecs.2017.8066189 · Cited by 79 · cited 1×
“Although there are many challenges of the application of bidirectional OBCs [17], such as additional system cost and reliability burden, low power density and high weight, and complex smart grid architecture implementation [18], [19], it is widely believed that bidirectional OBCs will become the main charging solution…”
BackgroundNew Perspectives for Vehicle-to-Vehicle (V2V) Power Transfer
Sousa, T. J. C., Monteiro, V., Fernandes, J. C. A., Couto, C., Melendez, A. A. N., & Afonso, J. L. (2018) · IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society · doi:10.1109/iecon.2018.8591209 · Cited by 79 · cited 1×
“The DC/DC V2V charging proposed in [51] increases the charging efficiency by decreasing the number of power transfer stages, but it lacks experimental results.”
BackgroundAn Effective Charging-Torque Elimination Method for Six-Phase Integrated On-Board EV Chargers
Xiao, Y., Liu, C., & Yu, F. Y. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2924538 · Cited by 76 · cited 1×
“The on-board charger (OBC) provides the ability for EVs to be charged directly from the AC grid and is widely used in automotive industry for its convenience, especially compared to the high-cost and large-volume of off-board charging solutions [7]–[10].”
BackgroundA Multifunctional Single-Phase EV On-Board Charger With a New V2V Charging Assistance Capability
Taghizadeh, S., Hossain, M. J., Poursafar, N., Lu, J., & Konstantinou, G. (2020) · IEEE Access · doi:10.1109/access.2020.3004931 · Cited by 76 · cited 4×
“Moreover, bidirectional OBCs would allow EV owners to use their vehicles for other purposes like providing vehicle-to-home (V2H) or vehicle-to-load (V2L) power during grid outage or vehicle-to-vehicle (V2V) function in case of an emergency [14]–[16].”
BackgroundMethodInfluentialSingle- and Three-Phase PHEV Onboard Battery Charger Using Small Link Capacitor
Yoo, K.-M., Kim, K.-D., & Lee, J.-Y. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2202361 · Cited by 74 · cited 1×
“6kW because of simple structure [35], [36].”
Paralleling GaN E-HEMTs in 10kW–100kW systems
Lu, J. L., & Chen, D. (2017) · 2017 IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2017.7931131 · Cited by 73 · cited 1×
“Although WBG devices currently have a higher cost, it is expected that the price will decrease as the production rises [143], [144].”
BackgroundSaber, C., Labrousse, D., Revol, B., & Gascher, A. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2500958 · Cited by 73 · cited 1×
“A variable DC-link voltage of the PFC converter can mitigate this disadvantage, but the resonant tank needs to be carefully designed to cover that wide-voltage range [125], [126].”
BackgroundArfeen, Z. A., Khairuddin, A. B., Munir, A., Azam, M. K., Faisal, M., & Arif, M. S. B. (2020) · Energy Storage · doi:10.1002/est2.115 · Cited by 68
A Review of on-Board Integrated Electric Vehicles Charger and a New Single-Phase Integrated Charger
Harbin Institute of Technology, Na, T., Yuan, X., Harbin Institute of Technology, Tang, J., Harbin Institute of Technology, hang, Q. Z., & Harbin Institute of Technology (2019) · CPSS Transactions on Power Electronics and Applications · doi:10.24295/cpsstpea.2019.00027 · Cited by 68 · cited 1×
“However, they do not concentrate on the research and application of the bidirectional OBC [1], [13], [25], [26].”
BackgroundA Single-Stage Three-Phase Bidirectional AC/DC Converter With High-Frequency Isolation and PFC
de Almeida, B. R., de Araújo, J. W. M., Praça, P. P., & Oliveira, D. S. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2775522 · Cited by 66 · cited 1×
“[131] and [132] propose a high frequency isolation single-stage structure.”
BackgroundLiu, Z., Li, B., Lee, F. C., & Li, Q. (2016) · 2016 IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2016.7855024 · Cited by 65 · cited 1×
“Indeed, bidirectional OBCs are able to achieve vehicle-to-grid (V2G) functionality by returning electrical energy back to the grid, which could be helpful during peak power demands [12], [13].”
BackgroundEVs for frequency regulation: cost benefit analysis in a smart grid environment
David, A. O., & Al‐Anbagi, I. (2017) · IET Electrical Systems in Transportation · doi:10.1049/iet-est.2017.0007 · Cited by 63 · cited 1×
“Also, the V2G technology can provide frequency and voltage regulation, which balances the supply and demand for active power and reactive power, respectively [43], [44].”
BackgroundLi, B., Li, Q., & Lee, F. C. (2018) · 2018 IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2018.8341053 · Cited by 62 · cited 1×
“Moreover, single-phase parallel dual DAB topologies [113], [114] and three-phase CLLC topologies [115], [116] have been studied.”
BackgroundImproved Power Quality On-Board Integrated Charger With Reduced Switching Stress
Gupta, J., Maurya, R., & Arya, S. R. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.2981955 · Cited by 60 · cited 2×
“Firstly, it is necessary to ensure that the OBC operation in charging mode meets the power quality standard of the grid [27].”
BackgroundMethodLi, B., Li, Q., & Lee, F. C. (2017) · 2017 IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2017.7931111 · Cited by 58 · cited 1×
“21kW/L [123], [124], as shown in Table 5.”
Background(2015) · Multimedialen Archiv und Publikationsserver der Christian-Albrechts-Universität zu Kiel (Christian-Albrechts-Universität zu Kiel) · Cited by 58
Coil Design for Wireless Vehicle-to-Vehicle Charging Systems
Mou, X., Gladwin, D. T., Zhao, R., Sun, H., & Yang, Z. (2020) · IEEE Access · doi:10.1109/access.2020.3025787 · Cited by 53 · cited 1×
“For example, the V2V technology can charge another EV when there is no charging station nearby [16], [48].”
BackgroundMa, M., Chang, Z., Hu, Y., Li, F., Gan, C., & Cao, W. (2018) · IEEE Access · doi:10.1109/access.2017.2779460 · Cited by 52 · cited 1×
“Electric vehicles (EVs) are highly attractive in the automotive industry because they use cleaner energy and can achieve superior performance compared to fossil-fueled vehicles [1]–[4].”
BackgroundPraneeth, A. V. J. S., & Williamson, S. S. (2019) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2019.2919197 · Cited by 50 · cited 1×
“Therefore, the proposed paper has the following contributions: • Detailed analysis of the current status of bidirectional OBCs including commercial examples, two-stage and single-stage configurations, single-phase and three-phase structures, and industry standards [28], [29].”
BackgroundAdil, M., Ali, J., Ta, Q. T. H., Attique, M., & Chung, T. (2020) · IEEE Access · doi:10.1109/access.2020.3031182 · Cited by 49 · cited 1×
“SWC and DWC are combined in [164], [165] and show promising results but are expected to also feature a high cost.”
BackgroundSfakianakis, G. E., Everts, J., & Lomonova, E. A. (2015) · 2015 Tenth International Conference on Ecological Vehicles and Renewable Energies (EVER) · doi:10.1109/ever.2015.7112939 · Cited by 47 · cited 3×
“Compared to the NPC converter, it has a better reliability and less number of switches.”
BackgroundDesign of 1 kW bidirectional half-bridge CLLC converter for electric vehicle charging systems
He, P., & Khaligh, A. (2016) · 2016 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES) · doi:10.1109/pedes.2016.7914445 · Cited by 46 · cited 19×
“Fig.5 (b) shows the DAB converter.”
BackgroundInfluentialRaherimihaja, H. J., Zhang, Q., Xu, G., & Zhang, X. (2021) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2020.2978684 · Cited by 45 · cited 1×
“A segmented three-phase OBC integrated with the motor drive is proposed in [47], which can offer torque-less and simple control in V2G mode.”
BackgroundComparison of 600V Si, SiC and GaN Power Devices
Chowdhury, S., Stum, Z., Li, Z. D., Ueno, K., & Chow, T. P. (2014) · Materials Science Forum · doi:10.4028/www.scientific.net/msf.778-780.971 · Cited by 44 · cited 1×
“In fact, as SiC MOSFET devices have a blocking voltage of 600V to 1700V, they can easily deal with battery voltages from 200V to 800V in most EVs [139].”
BackgroundA 22 kW on-board charger for automotive applications based on a modular design
Schmenger, J., Endres, S., Zeltner, S., & Marz, M. (2014) · 2014 IEEE Conference on Energy Conversion (CENCON) · doi:10.1109/cencon.2014.6967467 · Cited by 44 · cited 1×
“Moreover, single-phase parallel dual DAB topologies [113], [114] and three-phase CLLC topologies [115], [116] have been studied.”
BackgroundReconfigurable DC/DC Converter for Efficiency and Reliability Optimization
Sakly, J., Bennani-Ben Abdelghani, A., Slama-Belkhodja, I., & Sammoud, H. (2017) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2017.2676027 · Cited by 42 · cited 1×
“Some control methods are proposed to optimize the reliability, such as the switching function algorithm [168], the bi-objective algorithm based on efficiency and reliability [169], and the adaptive control method [170].”
MethodLeakage Current Issue of Non-Isolated Integrated Chargers for Electric Vehicles
Zhang, Y., Yang, G., He, X., Elshaer, M., Perdikakis, W., Li, H., Yao, C., Wang, J., Zou, K., Xu, Z., et al. (2018) · 2018 IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2018.8558133 · Cited by 41 · cited 1×
“Galvanic isolation is primarily required to prevent common mode currents from creating a shock hazard for the user [155].”
Background3.3kW CLLC converter with synchronous rectification for plug-in electric vehicles
Zou, S., Lu, J., Mallik, A., & Khaligh, A. (2017) · 2017 IEEE Industry Applications Society Annual Meeting · doi:10.1109/ias.2017.8101708 · Cited by 39
A Design Methodology for Flat Pick-up ICPT Systems
Elliott, G. A. J., Boys, J. T., & Covic, G. A. (2006) · 2006 1ST IEEE Conference on Industrial Electronics and Applications · doi:10.1109/iciea.2006.257165 · Cited by 39 · cited 1×
“Many methods are proposed like road built-in pad [160], pad array-based coupling technique [161], and segmental track strategy [162].”
MethodAn Interleaved 6-Level GaN Bidirectional Converter for Level II Electric Vehicle Charging
Chou, D., Fernandez, K., & Pilawa-Podgurski, R. C. N. (2019) · 2019 IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2019.8721971 · Cited by 39 · cited 1×
“A single-phase multilevel converters, such as three-level NPC [88], T-type [89] and six-level flying capacitor topology [90]–[94], enable device voltage stress reductions and power level increase.”
MethodAdvanced modulation strategy for a three-phase AC-DC dual active bridge for V2G
Weise, N. D., Basu, K., & Mohan, N. (2011) · 2011 IEEE Vehicle Power and Propulsion Conference · doi:10.1109/vppc.2011.6043121 · Cited by 38 · cited 1×
“Therefore, this topology can be a promising solution for the OBC application because of its high power density and low system loss [133], [134].”
BackgroundImproved Operation and Control of Single-Phase Integrated On-Board Charger System
Gao, J., Sun, W., Jiang, D., Zhang, Y., & Qu, R. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3025664 · Cited by 36 · cited 1×
“Reviews of integrated battery charger topologies have also been conducted [151]–[153].”
BackgroundBelkamel, H., Hyungjin, K., Beywongwoo, K., Shin, Y., & Choi, S. (2018) · 2018 IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2018.8557933 · Cited by 34 · cited 2×
“For example, [127]–[129] and [130] have proposed some AC/DC topologies with GaN or SiC technology and achieved high power factor and full ZVS operation through different methods.”
Bi-directional AC/DC converter based on neutral point clamped
Lin, B., Chen, D.-J., & Tsay, H.-R. (2002) · IEEE International Symposium on Industrial Electronics (ISIE) · doi:10.1109/isie.2001.931865 · Cited by 34
Adoption of wide bandgap technology in hybrid/electric vehicles-opportunities and challenges
Han, D., Li, S., Lee, W., & Sarlioglu, B. (2017) · 2017 IEEE Transportation Electrification Conference and Expo (ITEC) · doi:10.1109/itec.2017.7993332 · Cited by 34 · cited 1×
“Although WBG devices currently have a higher cost, it is expected that the price will decrease as the production rises [143], [144].”
BackgroundUncertainty Quantification for SAE J2954 Compliant Static Wireless Charge Components
Cirimele, V., Torchio, R., Villa, J. L., Freschi, F., Alotto, P., Codecasa, L., & Rienzo, L. D. (2020) · IEEE Access · doi:10.1109/access.2020.3025052 · Cited by 33 · cited 3×
“Moreover, SEA 2954 offers standard guidelines of WPT industry specifications [157].”
BackgroundWei, C., Shao, J., Agrawal, B., Zhu, D., & Xie, H. (2019) · 2019 IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2019.8721866 · Cited by 31 · cited 1×
“Moreover, bidirectional OBCs would allow EV owners to use their vehicles for other purposes like providing vehicle-to-home (V2H) or vehicle-to-load (V2L) power during grid outage or vehicle-to-vehicle (V2V) function in case of an emergency [14]–[16].”
BackgroundChen, G., & Cai, X. (2018) · IEEE Access · doi:10.1109/access.2018.2789421 · Cited by 30 · cited 1×
“Some control methods are proposed to optimize the reliability, such as the switching function algorithm [168], the bi-objective algorithm based on efficiency and reliability [169], and the adaptive control method [170].”
MethodMoia, J., Lago, J., Perin, A. J., & Heldwein, M. L. (2012) · 2012 3rd IEEE International Symposium on Power Electronics for Distributed Generation Systems (PEDG) · doi:10.1109/pedg.2012.6254005 · Cited by 29
An integrated battery charger for EVs based on an asymmetrical six-phase machine
Subotić, I., LEVI, E., Jones, M., & Graovac, D. (2013) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2013.6700337 · Cited by 29
Switching condition and loss modeling of GaN-based dual active bridge converter for PHEV charger
Xue, L., Boroyevich, D., & Mattavelli, P. (2016) · 2016 IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2016.7468038 · Cited by 28
Single-Phase Isolated Bidirectional AC-DC Battery Charger for Electric Vehicle – Review
Nassary, M., Orabi, M., Ghoneima, M., & El-Nemr, M. K. (2019) · 2019 International Conference on Innovative Trends in Computer Engineering (ITCE) · doi:10.1109/itce.2019.8646528 · Cited by 28
On‐board electric vehicle battery charger with improved power quality and reduced switching stress
Gupta, J., Maurya, R., & Arya, S. R. (2020) · IET Power Electronics · doi:10.1049/iet-pel.2019.0962 · Cited by 27 · cited 2×
“tery chargers, electrical machines, and charging technologies in [24].”
BackgroundMethodA high-efficiency 3.3-kW bidirectional on-board charger
Lai, J.-S., Zhang, L., Zahid, Z., Tseng, N.-H., Lee, C.-S., & Lin, C.-H. (2015) · 2015 IEEE 2nd International Future Energy Electronics Conference (IFEEC) · doi:10.1109/ifeec.2015.7361609 · Cited by 26 · cited 1×
“Although there are many challenges of the application of bidirectional OBCs [17], such as additional system cost and reliability burden, low power density and high weight, and complex smart grid architecture implementation [18], [19], it is widely believed that bidirectional OBCs will become the main charging solution…”
BackgroundSingle-phase half-bridge converter topology for power quality compensation
Lin, B.-R., & Hung, T.-L. (2002) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20020477 · Cited by 24
An integrated battery charger for EVs based on a symmetrical six-phase machine
Subotic, I., & Levi, E. (2014) · 2014 IEEE 23rd International Symposium on Industrial Electronics (ISIE) · doi:10.1109/isie.2014.6864937 · Cited by 24 · cited 5×
“As of now, a few EVs are capable of charging at 22kW, such as Tesla Model X, Renault Zoe, and BMW ix3.”
BackgroundInfluentialLeakage Current Mitigation of Non-Isolated Integrated Chargers for Electric Vehicles
Zhang, Y., Chen, C., Perdikakis, W., Cong, Y., Li, X., Elshaer, M., Abdullah, Y., Wang, J., Zou, K., & Xu, Z. (2019) · 2019 IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2019.8913245 · Cited by 24 · cited 1×
“Techniques for reducing these common mode currents have been presented [156].”
BackgroundBi-directional single-phase half-bridge rectifier for power quality compensation
Lin, B. R., Hung, T. L., & Huang, C. H. (2003) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20030261 · Cited by 22 · cited 1×
“A single-phase multilevel converters, such as three-level NPC [88], T-type [89] and six-level flying capacitor topology [90]–[94], enable device voltage stress reductions and power level increase.”
MethodGould, C., Colombage, K., Wang, J., Stone, D. A., & Foster, M. P. (2013) · IEEE International Conference on Power Electronics and Drive Systems (PEDS) · doi:10.1109/peds.2013.6527097 · Cited by 22 · cited 1×
“Although there are many challenges of the application of bidirectional OBCs [17], such as additional system cost and reliability burden, low power density and high weight, and complex smart grid architecture implementation [18], [19], it is widely believed that bidirectional OBCs will become the main charging solution…”
BackgroundThree Phase High Power Integrated Battery Charger for Plugin Electric Vehicles
Ali, S. Q., Mascarella, D., Joos, G., Coulombe, T., & Cyr, J.-M. (2015) · 2015 IEEE Vehicle Power and Propulsion Conference (VPPC) · doi:10.1109/vppc.2015.7353033 · Cited by 22 · cited 1×
“Other topologies for multiphase [148], open ended winding [149], and switched reluctancemachines [150] have also been proposed.”
BackgroundRemedial Switching Function Approach to Improve Reliability for AC–AC Converters
Kwak, S., & Toliyat, H. A. (2007) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2006.888027 · Cited by 21 · cited 1×
“Some control methods are proposed to optimize the reliability, such as the switching function algorithm [168], the bi-objective algorithm based on efficiency and reliability [169], and the adaptive control method [170].”
Methodhalf-bridge neutral point diode clamped rectifier for power factor correction
Lin, B.-R., Chen, D.-J., & Hung, T.-L. (2002) · IEEE Transactions on Aerospace and Electronic Systems · doi:10.1109/taes.2002.1145750 · Cited by 21
Gupta, K., Da Silva, C., Nasr, M., Assadi, A., Matsumoto, H., Trescases, O., & Amon, C. H. (2018) · 2018 17th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm) · doi:10.1109/itherm.2018.8419580 · Cited by 21
V2G and G2V Using Interleaved Converter for a Single-Phase Onboard Bidirectional Charger
Phimphui, A., & Supatti, U. (2019) · 2019 IEEE Transportation Electrification Conference and Expo, Asia-Pacific (ITEC Asia-Pacific) · doi:10.1109/itec-ap.2019.8903662 · Cited by 21 · cited 2×
“A non-isolated interleaved buck-boost OBC topology is proposed in [21], and it provides a power quality control that reactive power operation is not harmful on the battery as the energy of the battery is not consumed.”
BackgroundBlack-Box Small-Signal Structure for Single-Phase and Three-Phase Electric Vehicle Battery Chargers
Naziris, A., Francés, A., Asensi, R., et al. (2020) · IEEE Access · doi:10.1109/access.2020.3024534 · Cited by 20 · cited 1×
“be able to operate at full power capability with single- and three-phase supplies [34].”
BackgroundModelling and ZVS control of an isolated three-phase bidirectional AC-DC converter
Jauch, F., & Biela, J. (2013) · 2013 15th European Conference on Power Electronics and Applications (EPE) · doi:10.1109/epe.2013.6634323 · Cited by 19 · cited 1×
“For example, the topology in [135] is applied in Brusa EV chargers and minimizes the volume of the filter capacitor at the power rating over 1 kW.”
BackgroundSingle-phase half-bridge rectifier with power factor correction
Lin, B. R., & Yang, T. Y. (2004) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20040237 · Cited by 19 · cited 14×
“[96] M. Schweizer and J. W. Kolar, ‘‘Design and implementation of a highly efficient three-level T-type converter for low-voltage applications,’’ IEEE Trans.”
MethodInfluentialA New Bidirectional Three-Phase Phase-Modular Boost-Buck AC/DC Converter
Menzi, D., Bortis, D., & Kolar, J. W. (2018) · 2018 IEEE International Power Electronics and Application Conference and Exposition (PEAC) · doi:10.1109/peac.2018.8590670 · Cited by 18
Varajao, D., Miranda, L. M., Araujo, R. E., & Lopes, J. P. (2016) · IECON 2016 - 42nd Annual Conference of the IEEE Industrial Electronics Society · doi:10.1109/iecon.2016.7793779 · Cited by 17 · cited 1×
“Moreover, at high power levels, single-stage OBC converters would be preferred for bidirectional applications since they can achieve high power density and compactness, although they raise some challenges in terms of hardware design and achieving high efficiency [138].”
BackgroundComparison of integrated battery chargers for plug-in hybrid electric vehicles: Topology and control
Woo, D.-G., Choe, G.-Y., Kim, J.-S., Lee, B.-K., Hur, J., & Kang, G.-B. (2011) · 2011 IEEE International Electric Machines & Drives Conference (IEMDC) · doi:10.1109/iemdc.2011.5994791 · Cited by 16
High efficiency wide range bidirectional DC/DC converter for OBCM application
Liu, G., Li, D., Zhang, J. Q., & Jia, M. L. (2014) · 2014 International Power Electronics and Application Conference and Exposition · doi:10.1109/peac.2014.7038075 · Cited by 16 · cited 1×
“6kW OBC, which uses 650V GaN and 1200V SiC devices [79], [80].”
MethodKim, B., Kim, H., & Choi, S. (2018) · 2018 IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2018.8341592 · Cited by 16 · cited 1×
“Therefore, it can use components with a lower current ratings [40], [41].”
BackgroundAnalysis of Battery Reduction for an Improved Opportunistic Wireless-Charged Electric Bus
Yin, A., Wu, S., Li, W., & Hu, J. (2019) · Energies · doi:10.3390/en12152866 · Cited by 13 · cited 1×
“SWC and DWC are combined in [164], [165] and show promising results but are expected to also feature a high cost.”
BackgroundA Bidirectional Single-Stage Isolated AC-DC Converter for Electric Vehicle Chargers
Ramos, L. A., Felipe Van Kan, R., Mezaroba, M., Batschauer, A. L., & Rech, C. (2019) · 2019 IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2019.8912166 · Cited by 13 · cited 2×
“For example, [127]–[129] and [130] have proposed some AC/DC topologies with GaN or SiC technology and achieved high power factor and full ZVS operation through different methods.”
Reliability comparison of fault-tolerant HVDC based modular multilevel converters
Alharbi, M., Bhattacharya, S., & Yousefpoor, N. (2017) · 2017 IEEE Power & Energy Society General Meeting · doi:10.1109/pesgm.2017.8274712 · Cited by 12 · cited 1×
“[167] presents a fault-tolerant system to improve reliability, but it adds additional models that cause more weight and cost.”
Background(2016) · Cited by 12
Praneeth, A. V. J. S., Patnaik, L., & Williamson, S. S. (2018) · IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society · doi:10.1109/iecon.2018.8591163 · Cited by 12 · cited 1×
“Therefore, the proposed paper has the following contributions: • Detailed analysis of the current status of bidirectional OBCs including commercial examples, two-stage and single-stage configurations, single-phase and three-phase structures, and industry standards [28], [29].”
BackgroundLan, G., Zhang, S., & Wu, X. (2017) · 2017 IEEE Transportation Electrification Conference and Expo, Asia-Pacific (ITEC Asia-Pacific) · doi:10.1109/itec-ap.2017.8080765 · Cited by 11 · cited 1×
“This increases the stray capacitance between primary and secondary which are exposed to high dv/dt rates [67].”
BackgroundTran, V. T., Islam, M. R., Muttaqi, K. M., & Sutanto, D. (2019) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias.2019.8912310 · Cited by 11 · cited 1×
“A design of an amorphous high-frequency link for V2X is proposed in [53], and the charging and discharging modes are fully tested, but the efficiency is not mentioned.”
BackgroundG2V and V2G operation 20 kW battery charger
Escoda, J., Fontanilles, J., Biel, D., Repecho, V., Cardoner, R., & Griñó, R. (2013) · World Electric Vehicle Symposium and Exhibition (EVS) · doi:10.1109/evs.2013.6914939 · Cited by 11
Water-cooled on-board charger with optimized cooling channel
Bolte, S., Henkenius, C., Böcker, J., Zibart, A., Kenig, E. Y., & Figge, H. (2017) · European Conference on Power Electronics and Applications · doi:10.23919/epe17ecceeurope.2017.8099019 · Cited by 10 · cited 1×
“ensure efficient heat dissipation between the components and the heat sink [75].”
BackgroundTibola, G., & Barbi, I. (2011) · 2011 IEEE International Symposium of Circuits and Systems (ISCAS) · doi:10.1109/iscas.2011.5938180 · Cited by 9 · cited 1×
“Therefore, most commercial single-stage OBCs are used in low power levels and unidirectional application [136], [137].”
BackgroundVariable CLLC Topology Structure Technique for a Bidirectional on Board Charger of Electric Vehicle
Qu, L., Wang, X., Bai, Z., & Liu, Y. (2019) · 2019 4th International Conference on Power and Renewable Energy (ICPRE) · doi:10.1109/icpre48497.2019.9034808 · Cited by 9 · cited 1×
“rical phase-shifted DAB [109] or CLLC resonant converters [110]–[112] are more suitable for bidirectional DC/DC converters.”
BackgroundDesign Method of 6-Element Boundary Gain for LLC Resonant Converter of Electric Vehicle
Shen, C., Zhong, H., Zhang, Y., Tang, Y., & Zhang, Y. (2020) · IEEE Access · doi:10.1109/access.2020.3028941 · Cited by 9 · cited 1×
“5 (a), can achieve a 10kW bidirectional power flow with 96% efficiency when it is controlled with a variable switching frequency [105]–[107].”
BackgroundThermal design, analysis and optimization of a power charger for hybrid or electric vehicles
Biswal, L., & Kesav Kumar, S. (2011) · 2011 IEEE 13th Electronics Packaging Technology Conference · doi:10.1109/eptc.2011.6184389 · Cited by 8 · cited 1×
“The bidirectional OBC also needs to be mechanically integrated inside an enclosure, which has to be sealed to avoid environmental contamination [76].”
BackgroundSaber, C., Labrousse, D., Revol, B., et al. (2017) · International Symposium on Electromagnetic Compatibility - EMC Europe (EMC Europe) · doi:10.1109/emceurope.2017.8094616 · Cited by 8 · cited 1×
“results that account for both DM and CMnoise emission [66].”
BackgroundLiu, B., Qiu, M., Jing, L., & Chen, M. (2017) · 2017 IEEE Transportation Electrification Conference and Expo, Asia-Pacific (ITEC Asia-Pacific) · doi:10.1109/itec-ap.2017.8080766 · Cited by 7
A reduced-part single stage direct AC/DC On-board charger for automotive applications
Dusmez, S., Chen, C., & Khaligh, A. (2013) · 2013 Twenty-Eighth Annual IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2013.6520538 · Cited by 7 · cited 1×
“However, [127], [128], and [130] lack efficiency information.”
(2017) · White Rose eTheses Online (University of Leeds, The University of Sheffield, University of York) · Cited by 7
Reimers, J., & Emadi, A. (2019) · 2019 IEEE 28th International Symposium on Industrial Electronics (ISIE) · doi:10.1109/isie.2019.8781213 · Cited by 7
Self-citation(2018) · OhioLink ETD Center (Ohio Library and Information Network) · Cited by 7
G2V and V2G operation 20 kW Battery Charger
Escoda, J., Fontanilles, J., Biel, D., Repecho, V., Cardoner, R., & Griñó, R. (2013) · World Electric Vehicle Journal · doi:10.3390/wevj6040839 · Cited by 7
Gutierrez, B., & Kwak, S.-S. (2020) · IEEE Access · doi:10.1109/access.2020.3011475 · Cited by 6 · cited 1×
“WBG devices, like SiC and GaN, provide many advantages over traditional Silicon (Si) devices [140].”
BackgroundCurrent Fiscal Year (2012 – 2013) Status of the Hybrid and Electric Systems R&D at the U.S. – DOE
Howell, D. (2013) · World Electric Vehicle Journal · doi:10.3390/wevj6030502 · Cited by 6
Hybrid PFC-inverter topology for bidirectional on board charger for range extended electric vehicle
Kim, Y.-S., Park, G.-C., Ahn, J.-H., & Lee, B.-K. (2015) · 2015 18th International Conference on Electrical Machines and Systems (ICEMS) · doi:10.1109/icems.2015.7385090 · Cited by 6 · cited 1×
“For example, single-phase bidirectional full-bridge converters, and their variants are popular but suffer high power losses [85]–[87].”
BackgroundMishra, D., Singh, B., & Panigrahi, B. K. (2019) · IEEE Transportation Electrification Conference (ITEC-India) · doi:10.1109/itec-india48457.2019.itecindia2019-228 · Cited by 5 · cited 1×
“An adaptive sliding current control is presented in [46] for dynamic current tracking, which fastens the convergence and”
MethodOptimized Bidirectional PFC Rectifiers & Inverters - Si vs. SiC vs. GaN in 2L and 3L Topologies -
Wyss, J., & Biela, J. (2018) · 2018 International Power Electronics Conference (IPEC-Niigata 2018 -ECCE Asia) · doi:10.23919/ipec.2018.8507372 · Cited by 4 · cited 1×
“Therefore, the T-type converter is a good candidate for three-phase bidirectional PFC converter in the future OBC market [104].”
Background(2018) · NORA - Norwegian Open Research Archives · Cited by 3
Half-bridge neutral point diode clamped rectifier for power factor correction
Lin, B., Li, Y.-C., & Chen, D.-J. (2003) · Power Conversion Conference · doi:10.1109/pcc.2002.997545 · Cited by 2
Current Fiscal Year (2012–2013) status of the hybrid and electric systems R&D at the U.S. — DOE
Howell, D. (2013) · 2013 World Electric Vehicle Symposium and Exhibition (EVS27) · doi:10.1109/evs.2013.6914809
Research works printed but not linked: 17
- 2017, Electrical and electronics technical team roadmap
- 2018, IEEE Standard for Interconnection and Interoperability of Distributed Energy Resources with Associated Electric Power Systems Interfaces
- 1994, Auto-Delivery
- 2017, bar IEC Webstore
- 2020, Power Quality Requirements for Plug-in Vehicle Chargers
- 2014, IEEE Recommended Practices and Requirements for Harmonic Control in Electrical Power Systems
- goswami, 2017, Thermal management of on-board chargers in E-vehicles, Electron Cooling
- 2019, On Board Charger (OBC) LLC Converter
- 2020, TIDM-1007 High Efficiency GaN CCM Totem Pole Bridgeless Power Factor Correction (PFC) Reference Design
- 2019, Electrically Propelled Vehicles
- plugs, 2014, Vehicle connectors and vehicle inlets conductive charging of electric vehicles Part 1, 2, 3, IEC Standard, 62196, 1
- contact, 2014, Charging technology for E-mobility—Product overview 2017, Inspiring Innov, 2, 1
- 2019, Infineon
- 2020, On Board Charger (OBC) Three-Phase PFC Converter
- 2020, 6 6 kw High Power Density Bi-Directional EV on-Board Charger
- 2013, On-Board Charger Specifications Eaton
- 2019, TIDA-010054 Bi-Directional Dual Active Bridge Reference Design for Level 3 Electric Vehicle Charging Stations
Cited by
Electric Vehicle-to-Grid (V2G) Technologies: Impact on the Power Grid and Battery
Mojumder, M. R. H., Ahmed Antara, F., Hasanuzzaman, M., Alamri, B., & Alsharef, M. (2022) · Sustainability · doi:10.3390/su142113856 · Cited by 306
Bidirectional Onboard Chargers for Electric Vehicles: State-of-the-Art and Future Trends
Wouters, H., & Martinez, W. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3319996 · Cited by 280
“Key standards are SAE J2894, IEC 61000, and GB/T 14549 [18], [21], [97].”
BackgroundInfluentialA Review on UAV Wireless Charging: Fundamentals, Applications, Charging Techniques and Standards
Chittoor, P. K., Chokkalingam, B., & Mihet-Popa, L. (2021) · IEEE Access · doi:10.1109/access.2021.3077041 · Cited by 269
“…UAV protocol data [200], avoiding charging conflicts [169]–[174], design of novel coil structures [149], [151], [152], drone to drone (V2V) charging [175], Supercapacitor based fast charging [176], dynamic charging of UAV during long flight hours [177], [178], Efficient battery management of UAV for…”
BackgroundSingh, A. R., Vishnuram, P., Alagarsamy, S., Bajaj, M., Blazek, V., Damaj, I., Rathore, R. S., Al-Wesabi, F. N., & Othman, K. M. (2024) · Alexandria Engineering Journal · doi:10.1016/j.aej.2024.06.093 · Cited by 183
Upputuri, R. P., & Subudhi, B. (2023) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2023.3289965 · Cited by 180
“The state-of-the-art converter topologies were reviewed in [8], [9], [10], [11], [12], [13], [14], [15], [16], [17], and [18], as listed in Table I.”
Background
Metadata
- Authors
- Yuan, J., Dorn-Gomba, L., Callegaro, A. D., Reimers, J., & Emadi, A.
- Affiliations
- McMaster University (CA)
- Venue
- IEEE Access
- Published
- 2021
- Volume
- 9
- Pages
- 51501-51518
- ISSN
- 2169-3536 (ISSN-L)
- OpenAlex
- W3147908447
- Cited by
- 390
- References
- 159
- Citations by year
- 2026: 48 · 2025: 94 · 2024: 100 · 2023: 83 · 2022: 49 · 2021: 16
- FWCI
- 18.20
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Locations
- IEEE Access (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Wireless Power Transfer Systems
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electric Vehicles and Infrastructure
- Keywords
- electric vehicles, bidirectional power flow, power electronics topology, two-stage converter, single-stage converter, wide bandgap semiconductors, thermal management, wireless charging, charging efficiency, power density
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol and qwen3.8-omni-flash).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.