A Review of Bidirectional On-Board Chargers for Electric Vehicles
Open accessThe DOI matches its Crossref record; 155 of the 159 references it cites were found in a registry or an index; 19 of the 150 sources its claims cite were checked for support.
Abstract
The fast development of electric vehicles (EVs) provides significant opportunities to further utilize clean energies in the automotive. On-board chargers (OBCs) are widely used in EVs because of their simple installation and low cost. Limited space in the vehicle and short charging time require an OBC to be power-dense and highly efficient. Moreover, the possibility for EVs to deliver power back to the grid has increased the interest in bidirectional power flow solutions in the automotive market. This paper presents a comprehensive overview and investigation on the state-of-the-art solutions of bidirectional OBCs. It reviews the current status, including architectures and configurations, smart operation modes, industry standards, major components, and commercially available products. A detailed overview of the promising topologies for bidirectional OBCs, including two-stage and single-stage structures, is provided. Future trends and challenges for topologies, wide bandgap technologies, thermal management, system integration, and wireless charging systems are also discussed in this paper.
Overview
CoChat Summary
TL;DR
This review surveys bidirectional on-board chargers (OBCs) for electric vehicles, covering architectures, operation modes, standards, components, commercial products, and promising two-stage and single-stage topologies. It finds two-stage designs dominate commercial use, while single-stage high-power bidirectional OBCs remain mostly theoretical despite higher power-density potential.
Key findings
- Bidirectional OBCs enable V2G, V2H, V2L, and V2V; current use is mainly level-2 AC charging from 3.7 kW to 22 kW, while level-3 AC reverse power flow is mostly limited to 6.6–12 kW due to battery degradation and capacity.
- Commercial examples include Texas Instruments’ 6.6 kW SiC OBC at 97% efficiency, Delta-q’s 6.6 kW unit above 96% efficiency and 2.26 kW/L, Wolfspeed’s 6.6 kW unit at 3.3 kW/L and >96.5% peak efficiency, and Current Ways’ 20 kW modular SiC OBC above 97% efficiency and 3.3 kW/L.
- Most commercial bidirectional OBCs use a two-stage structure with a totem-pole PFC front end and CLLC or DAB DC/DC stage; PFC converters commonly exceed 98% efficiency, and DC/DC converters generally exceed 98%, but high power density at high power ratings remains challenging.
- Single-stage OBCs remove the bulky DC-link capacitor and can offer higher power density and lower cost, but most are theoretical, suffer low efficiency and complex control, and no high-power commercial product has been developed to date.
Methods
- Review paper: qualitative synthesis of state-of-the-art bidirectional OBCs, including architectures, configurations, smart operation modes, industry standards, major components, and commercially available products.
- Data sources: published literature, standards documents, and posted information from six commercial examples—Texas Instruments, Delta-q, Wolfspeed, Current Ways, Valeo Siemens, and Eaton—plus discussion of BYD, Tesla, Renault, BMW, Honda, and Nissan examples.
- Main analysis: comparative review of two-stage and single-stage topologies, PFC and DC/DC converter options, wide-bandgap devices, thermal management, system integration, and wireless charging trends, supported by summary tables.
Limitations
- Paper-stated: bidirectional OBCs face additional system cost, reliability burden, low power density, high weight, and complex smart-grid architecture implementation; V2G is still early-stage and not yet applied in the industry due to battery capacity and grid infrastructure limits.
- Paper-stated: frequent charging/discharging causes battery degradation—daily 2-hour frequency regulation is reported to consume 14.3% of battery capacity, and adding peak shaving can take up to 35.6%.
- Evident from text: as a review, it does not describe a systematic literature-search or selection method, and performance comparisons rely on manufacturer-posted or literature data with missing fields, such as power density not being shared by most manufacturers; no independent experimental validation is reported.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
15 Valid · 33 Not valid · 85 Not checked · 107 Own results and interpretations
Every source the paper cites for this claim was checked and supports it.
In the paper
“The high switching frequency of high power-dense bidirectional OBCs results in potential thermal management challenges because of higher switching loss and eddy current loss [72].”
What the sources say
- Supportedcites [72] [72] K. Gupta, C. Da Silva, M. Nasr, A. Assadi, H. Matsumoto, O. Trescases, and C. H. Amon, ''Thermal management strategies for a high-frequency, bi-directional, on-board electric vehicle charger,'' in Proc. 17th IEEE Intersociety Conf. Thermal Thermomechanical Phenomena Electron. Syst. (ITherm) , San Diego, CA, USA, May 2018, pp. 935 943. - source
The Introduction states that higher switching frequency causes thermal-management challenges through higher MOSFET switching losses and considerably higher eddy-current losses in heat sinks. This directly supports the cited sentence. (LLM, conf=0.95)
hedgedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
Every source the paper cites for this claim was checked and supports it.
In the paper
“Moreover, the V2G mode can help to reduce the grid current harmonics. The battery chargers are treated as variable impedance and eliminate the harmonics issue through appropriate ltering methods [45].”
What the sources say
- Supportedcites [45] [45] Z. A. Arfeen, A. B. Khairuddin, A. Munir, M. K. Azam, M. Faisal, and M. S. B. Arif, ''En route of electric vehicles with the vehicle to grid technique in distribution networks: Status and technological review,'' Energy Storage , vol. 2, no. 2, p. e115, Apr. 2020. - source
Section 5 (VEHICLE TO GRID) lists among V2G's advantages the explicit item 'reduce current harmonics' and states 'The inclusion of V2G can give better harmonics filtration'. Section 5.4 (Harmonic filtering) supplies the second half of the sentence: EV/power chargers 'act as a variable impedance for discrete frequencies and resolves the harmonic issues with an appropriate filtering method.' Both parts of the paraphrase are stated in our copy. (LLM, conf=0.90)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Most manufacturers study the totem-pole PFC topology as the front-end stage and DAB or CLLC topologies as the back-end stage.”
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“To this day, there are only a few bidirectional single-stage OBCs used in the automobile industry.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“However, no commercial product has been developed to this day.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
39 more claims
Create a free account to see all 240 claims and to verify the 7 references still open.
- It may state two separate claims as one. 112
- Probably not a substantial claim. 130
- The quote only partly states this claim. 2
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source doesn’t support the claim as written.
In the citing paper
“The study in [52] includes very few selected bidirectional OBCs, consisting of a report on the power density of four industrial OBCs.”
From On-Board Chargers for Electric Vehicles: A Comprehensive Performance and Efficiency Review (2024) · cites this paper as [52]
Checked by a reasoning model — may be wrong.
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ TABLE 4. Bidirectional PFC summary. · p. 8
“the converter achieves up to 98.86% ef ciency at a 1.6kW power level [78].”
§ TABLE 4. Bidirectional PFC summary. · p. 8
“| | Three-phase | CRM | 85-265 | 390 | 450-1000 | 1.6 | 98.7 | >15 | GaN | >0.99 |”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ C. STANDARDS · p. 4
“the total harmonic distortion (THD) of currents should be less than 7% to comply with the Institute of Electrical and Electronics Engineers (IEEE) 519 requirements [54].”
§ 1) EMI FILTERS · p. 5
“Recommended practice and requirements for stable harmonics limitation of the voltage and current (THD<8%)”
Citations
Cites
Yilmaz, M., & Krein, P. T. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2212917 · Cited by 3,118
A Review of Three-Phase Improved Power Quality AC–DC Converters
Singh, B., Singh, B. N., Chandra, A., Al-Haddad, K., Pandey, A., & Kothari, D. P. (2004) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2004.825341 · Cited by 1,728 · cited 1×
“In addition to single-phase PFC topologies, a lot of research is being undertaken on three-phase bidirectional PFC converters like the full-bridge converter [95], NPC [93], T-type [96] and matrix converter [97]–[99].”
BackgroundA review of single-phase improved power quality ac~dc converters
Singh, B., Singh, B. N., Chandra, A., Al-Haddad, K., Pandey, A., & Kothari, D. P. (2003) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2003.817609 · Cited by 1,297 · cited 1×
“For example, single-phase bidirectional full-bridge converters, and their variants are popular but suffer high power losses [85]–[87].”
BackgroundModern Trends in Inductive Power Transfer for Transportation Applications
Covic, G. A., & Boys, J. T. (2013) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2264473 · Cited by 1,263 · cited 1×
“Many methods are proposed like road built-in pad [160], pad array-based coupling technique [161], and segmental track strategy [162].”
MethodReview of Commercial GaN Power Devices and GaN-Based Converter Design Challenges
Jones, E. A., Wang, F. F., & Costinett, D. (2016) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2016.2582685 · Cited by 1,259 · cited 1×
“GaN semiconductors reaches up to 650V, these devices are becoming an attractive solution for OBCs [142].”
BackgroundUsing fleets of electric-drive vehicles for grid support
Tomić, J., & Kempton, W. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.03.010 · Cited by 1,018 · cited 1×
“A variable DC-link voltage of the PFC converter can mitigate this disadvantage, but the resonant tank needs to be carefully designed to cover that wide-voltage range [125], [126].”
BackgroundSchweizer, M., & Kolar, J. W. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2203151 · Cited by 1,006 · cited 14×
“[96] M. Schweizer and J. W. Kolar, ‘‘Design and implementation of a highly efficient three-level T-type converter for low-voltage applications,’’ IEEE Trans.”
BackgroundMethodInfluentialPerformance Evaluation of Bridgeless PFC Boost Rectifiers
Huber, L., Jang, Y., & Jovanovic, M. M. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2008.921107 · Cited by 865
Un-Noor, F., Padmanaban, S., Mihet-Popa, L., Mollah, M., & Hossain, E. (2017) · Energies · doi:10.3390/en10081217 · Cited by 809 · cited 1×
“However, they do not concentrate on the research and application of the bidirectional OBC [1], [13], [25], [26].”
BackgroundThe Essence of Three-Phase PFC Rectifier Systems—Part I
Kolar, J. W., & Friedli, T. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2197867 · Cited by 788
Research works printed but not linked: 21
- [39] X. Gong and J. Rangaraju, ''Taking charge of electric vehicles Both in the vehicle and on the grid,'' Texas Instrum., Dallas, TX, USA, Tech. Rep. SZZY007A, Jun. 2020, pp. 1 13. -
- [35] G. Yang, E. Draugedalen, T. Sorsdahl, H. Liu, and R. Lindseth, ''Design of high ef ciency high power density 10.5 kw three phase on-boardcharger for electric/hybrid vehicles,'' in Proc. Int. Exhib. Conf. Power Electron., Intell. Motion, Renew. Energy Manage. , Nuremberg, Germany, May 2016, pp. 1 7. -
- [23] Electrical and Electronics Technical Team Roadmap , UDD, Mumbai, India, Oct. 2017. -
- [58] IEEE Standard for Interconnection and Interoperability of Distributed Energy Resources With Associated Electric Power Systems Interfaces , Standard 1547-2018, Apr. 2018. -
- [57] Auto-Delivery , document GB/T 14549-1993, Mar. 1994. -
- [56] bar IEC Webstore , document IEC 61851-1:2017, Feb. 2017. -
- [55] Power Quality Requirements for Plug-In Electric Vehicle Chargers SAE International , Standard J2894/1B (WIP), Jun. 2020. -
- [54] IEEE Recommended Practice and Requirements for Harmonic Control in Electric Power Systems , Standard 519-2014, Mar. 2014. -
- [73] A. Goswami, ''Thermal management of on-board chargers in E-vehicles,'' Electron. Cooling , Aug. 2017. -
- [71] On Board Charger (OBC) LLC Converter , document TND6318/D, Sep. 2019. -
- [70] D. Giacomini, ''An overview and comparison of on board chargers topologies, semiconductors choices and synchronous recti cation advantages in automotive applications,'' In neon Italy s.r.l. ATV Group, Padua, Italy, Tech. Rep., May 2017, pp. 1 23. -
- [78] TIDM-1007 High Ef ciency GaN CCM Totem Pole Bridgeless Power Factor Correction (PFC) Reference Design , Taxes Instruments, Bengaluru, India, Mar. 2020. -
- [61] Electrically Propelled Vehicles , document ISO 6469-1:2019, Apr. 2019. -
- [63] S.-O. Plugs, ''Vehicle connectors and vehicle inlets conductive charging of electric vehicles Part 1, 2, 3,'' IEC Standard , vol. 62196, pp. 1 176, Jun. 2014. -
- [64] P. Contact, ''Charging technology for E-mobility Product overview 2017,'' Inspiring Innov. , vol. 2, pp. 1 56, Dec. 2014. <!-- image --> IEEEAccess" -
- [68] B. Johnson, ''Power factor correction design for on-board chargers in electric vehicles,'' Texas Instrum., Dallas, TX, USA, Tech. Rep. SLUA896, Jun. 2018, pp. 1 17. -
- 2019, Infineon
- [103] On Board Charger (OBC) Three-Phase PFC Converter , ON Semiconductor, Phoenix, AZ, USA, Mar. 2020. -
- [81] 6.6 kw High Power Density Bi-Directional EV on-Board Charger , Cree Power Applications, Durham, CA, USA, Jan. 2020. -
- 2013, On-Board Charger Specifications Eaton
- [119] TIDA-010054 Bi-Directional, Dual Active Bridge Reference Design for Level 3 Electric Vehicle Charging Stations , Texas Instrum., Dallas, TX, USA, Jun. 2019. -
Cited by
Items 301–379 of 379
Bidirectional AC-DC Converter System for Grid-to-Vehicle and Vehicle-to-Grid Applications
Sai, R. R., Kumar, M., Dual, M. A., Lakshmi, S., Tewari, S. V., & Udumula, R. R. (2024) · Lecture notes in electrical engineering · doi:10.1007/978-981-97-6091-6_19
Power Factor Correction Buck-Boost Converter for On-Board EV Charging Application
Udumula, R. R., Patnaik, S., Nandigama, S. K., Dega, U. S., Lokeshgupta, B., Vemula, N. K., & Kirankumar, N. (2024) · Lecture notes in electrical engineering · doi:10.1007/978-981-97-6091-6_15
Operation Characteristics of an Active Buffer DAB AC-DC Converter with a Wide Output Voltage Range
Komeda, S., Malanda, S. C., Arai, K., Kifune, H., Takuma, S., & Ohnuma, Y. (2024) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce55643.2024.10861310
Model Predictive Control of a Wide Voltage Range Battery Charger for G2V and V2G Applications
Karneddi, H., Ronanki, D., & Rodríguez, J. (2024) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce55643.2024.10861776
Design of a single-phase bidirectional charger for power flow control in electric vehicles
Eti, S. L., & Sudha, K. R. (2025) · Engineering Research Express · doi:10.1088/2631-8695/adbbb2
Adil, H. M. M., & Khan, H. A. (2024) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon55916.2024.10905171
“In contrast, the DC-DC power converter is used to step up or down the DC voltage level to meet the battery requirements [3, 4].”
A New Approach Of DC-Link Capacitor Design For 6.6kw E-Cap less Single-Phase On-Board EV charger
Dizji, R. H., & Zolghadri, M. R. (2025) · Power Electronics, Drive Systems, and Technologies Conference (PEDSTC) · doi:10.1109/pedstc65486.2025.10911958
“1 shows conventional structure of EV chargers [21].”
Harmonic Analysis of EVs Connected to Grid and Suppression of Harmonics with FLC
Vishwakarma, S., Reddy, C. V., Chawla, P., & Surjan, B. S. (2024) · International Conference on Advancement in Electronics & Communication Engineering (AECE) · doi:10.1109/aece62803.2024.10911670
Efficient Energy Exchange in V2G System for enhanced Power Quality
Padmavathi, R., Sivakumar, P., A, S. C. S., Mogesh Kanna, S., Kalaivani, R., & Jagadeesh, V. (2025) · International Conference on Intelligent and Innovative Technologies in Computing, Electrical and Electronics (IITCEE) · doi:10.1109/iitcee64140.2025.10915217
Mallikarjun, P., & Rajan, G. T. S. (2024) · International Conference on Sustainable Power & Energy (ICSPE) · doi:10.1109/icspe62629.2024.10924389
“On-board charging is examined in depth by Yuan et al. (2021), who present a catalogue of commercial bidirectional chargers as well as a study of the many configurations that are possible.”
Predictive PFM-based Digital Control Algorithm for LLC DC-DC Converter for Automotive Applications
Mishra, M., Kumar, R., & Nidubrolu, K. (2025) · International Conference on Power, Control and Computing Technologies (ICPC2T) · doi:10.1109/icpc2t63847.2025.10958700
“DC-DC converters are used in the widely adopted two-stage architecture of battery chargers which comprises an active front-end PFC(Power Factor Correcting) AC-DC converter cascaded with an active isolated DC-DC converter [1].”
An Extra-Element Small-Signal Model for a Current-Fed Resonant Dual-Active-Bridge Converter
Sbabo, P., Mattavelli, P., Spiazzi, G., et al. (2025) · IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec48143.2025.10977033
“One example of bidirectional power converter is the single-phase Dual-Active-Bridge (DAB) converter used as On-Board Charger (OBC) [5].”
Optimized Bidirectional On-Board Charger Using a Novel Unfolder-Dab Topology
Sarnago, H., Álvarez, I., Briz, P., & Lucía, Ó. (2025) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec48143.2025.10977157
“On-board chargers (OBCs) [6, 8-11] are essential to ensure fast and efficient charge regardless the grid voltage, number of grid phases or the battery charge status.”
Rojchaya, S., Jindapetch, N., & Sengchuai, K. (2025) · International Electrical Engineering Congress (iEECON) · doi:10.1109/ieecon64081.2025.10987629
Dong, S., Shi, L., Li, Q., et al. (2025) · Lecture notes in electrical engineering · doi:10.1007/978-981-96-4800-9_70
Study of Existing Electrical Vehicle and its Modifications
Godhane, P. (2025) · International Journal for Research in Applied Science and Engineering Technology · doi:10.22214/ijraset.2025.70451
Topologies, Control Algorithms and Applications of Bidirectional DC-DC Converters
Krim, S. A., Krim, F., Afghoul, H., Bey, H., & Abdelmalek, F. (2024) · International Conference on Advances in Electrical and Communication Technologies (ICAECOT) · doi:10.1109/icaecot62402.2024.10994890
Farooqi, M. Z., Singh, B., & Panigrahi, B. K. (2024) · IEEE Power India International Conference · doi:10.1109/piicon63519.2024.10995138
“Electric vehicles utilize dedicated chargers, known as on-board chargers, which are installed within the vehicle [1].”
The Novel Electric Vehicle High-Power On-Board Charger Topology with Modular Multilevel Converter
Azghandi, A. V., & Khazaei, A. (2024) · Smart Grid Conference · doi:10.1109/sgc64640.2024.10983678
“As a result, we will see a reduction in costs and an increase in power density [7].”
Xu, M., Ding, H., Han, R. G., et al. (2025) · Energies · doi:10.3390/en18174481
Hrudhya Kurian, C., & Parag Jose, C. (2025) · Research Square · doi:10.21203/rs.3.rs-6999144/v1
A Forward Derived n-module High Buck Topology
Acharya, S., & Das, S. (2025) · doi:10.1109/intelec63987.2025.11214730
Mousavi, M. S., Aly, M., Davari, S. A., et al. (2025) · Proceedings of the Annual Conference of the IEEE Industrial Electronics Society · doi:10.1109/iecon58223.2025.11221292
“However, it is possible to integrate these systems by using the motor drive’s converter for battery charging–a concept known in the literature as the on-board integrated battery charger (OIBC) [6].”
Bakry, N., Fawzi, M., Abdelsalam, I., & Kalas, A. E. (2025) · IEEE Conference on Power Electronics and Renewable Energy (CPERE) · doi:10.1109/cpere65146.2025.11240088
“Isolation is another key classification criterion, with galvanically isolated chargers (using high-frequency transformers) ensuring safety and non-isolated designs improving efficiency and power density [15].”
An Novel Isolated Multi-level DC-DC Power Converter for Electric Vehicle Applications
Sugumar, U., Thanishkumar, R., Dharinish, A., et al. (2025) · IEEE International Conference on Contemporary Computing and Communications (InC4) · doi:10.1109/inc465408.2025.11256395
“Experimental outcomes ascertain that the system attains improved efficiency, good voltage regulation, and lower electromagnetic interference (EMI), demonstrating a real application next generation EV power systems technology [15], [16].”
Design and analysis of high-power bidirectional resonant converter for EV charging applications
Lakshmanan, P., Abhishek, A., & Ranjan, A. (2025) · IEEE International Conference on Sustainable Energy and Future Electric Transportation (SEFET) · doi:10.1109/sefet65155.2025.11255161 · Cited by 1
“The EV and PHEV growth has led to the development of different types of bidirectional chargers for mobility applications [1].”
Multi-Functional On-Board EV Charger with Bidirectional Power Flow Capability
Malla, A. B., & Myneni, H. (2025) · IEEE International Conference on Sustainable Energy and Future Electric Transportation (SEFET) · doi:10.1109/sefet65155.2025.11255043
“However, for electric vehicles (EVs) to be adaptable to any charging location, OBC designs must be capable of operating at their full power capacity with both single-phase and three-phase supplies [4],[5].”
A Three-Level AC-DC Converter for Three-Phase and Single-Phase Compatible EV Fast Chargers
Choi, H.-S., Lee, S. J., Cho, Y., Kim, S., & Chae, J. (2025) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce58356.2025.11259854
Comparative Study on Non-Isolated Integrated on-Board Chargers for BEV/PHEV
Sakai, K., Toda, K., Matsumori, H., et al. (2025) · doi:10.1109/ecce58356.2025.11259660
Jang, J., Shin, Y., Kim, J.-W., Yang, D., Kim, H., & Cho, Y. (2025) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce58356.2025.11260169
Development of Multifunctional On-Board Charger for Automotive Applications
Nishimura, K., Matsumori, H., Kosaka, T., et al. (2025) · doi:10.1109/ecce58356.2025.11260203
Qiao, G., Hou, Y., Sun, Q., Zhang, J., Zhao, Y., & Liu, Z. (2025) · International Journal of Circuit Theory and Applications · doi:10.1002/cta.70265
Park, Y.-H., Ullah, A., & Choi, Y.-O. (2025) · International Conference on Renewable Energy Research and Applications (ICRERA) · doi:10.1109/icrera66237.2025.11284285
“In particular, with the rapid increase in EV sales, the demand for and research on EV chargers have also been growing rapidly [1-3].”
Pulse Density Modulation for Active Rectifiers above 500 kHz in EV Chargers
Ngo-Phi, T., & Nguyen-Quang, N. (2025) · International Conference on Mechatronics Technology (ICMT) · doi:10.1109/icmt67823.2025.11298752
“Common topologies such as Voltage Source Rectifier (VSR) and Vienna rectifier offer precise control and are widely deployed with modulation techniques like SVPWM and carrier-based PWM (CB-PWM) [6], [7].”
Implementation of Bidirectional T-type AC/DC Converter for Electric Vehicle Charging
Chen, Y.-H., Lin, H.-Z., Hsu, C.-W., & Chen, J.-F. (2025) · IEEE International Future Energy Electronics Conference (IFEEC) · doi:10.1109/ifeec65025.2025.11301467
“An additional benefit of T-type converter is that the half-bridge diodes are replaced by the active switches to enable the bidirectional power flows and achieve synchronous rectification (SR) [2].”
InfluentialOmkar, M., & Kumar, M. V. (2025) · International Conference on Automation, Computing and Renewable Systems (ICACRS) · doi:10.1109/icacrs67045.2025.11324359
“This type of approach allows EVs to be used as distributed energy storage resources, providing auxiliary services such as frequency management, peak shaving, and reactive power compensation, thereby contributing to grid resilience and sustainability[1-2].”
Evaluation and Comparison of Various DC to DC Converters used for EV Charging
Golu, V. C., & Kumar, R. (2025) · IEEE Silchar Subsection Conference (SILCON) · doi:10.1109/silcon67893.2025.11326932
“Additionally, a major issue is the variance in efficiency across the charging range, which ranges from 75% to 89% from the cut-off region to the highest power transfer sector [3].”
Deepti, T., K, D. M., Sangeetha, S., et al. (2026) · Journal of King Saud University - Science · doi:10.25259/jksus_630_2025
Evaluating Sustainable Power Electronics in Electric Vehicles Using Real-World Performance Data
Panicker, I., & Kathrine, G. J. W. (2025) · doi:10.1109/icoiics67115.2025.11390509
“[ 5][9].”
PV-assisted EV Charging Station with G2V/V2G/V2V Features Utilizing Fuzzy Controller
Das, S., Pandey, S. K., Maiti, S., & Peyada, N. K. (2025) · International Conference on Power Electronics and Energy (ICPEE) · doi:10.1109/icpee65973.2025.11410714
“Single-phase totem-pole interleaved converters for the front-end stage, and resonant CLLC or Dual Active Bridge (DAB) converters for the DC/DC stage, are expected to gain popularity in the future [21].”
Predictive Graph Neural Network Framework for Congestion Aware V2V Energy SharingPreprint
Jassar, N. A. (2026) · Research Square · doi:10.21203/rs.3.rs-8767957/v1 · Cited by 1
Prajapati, R. K., & Kumar, R. (2026) · International Journal of Circuit Theory and Applications · doi:10.1002/cta.70404
Higher Order Sliding Robust Control Design for Single-Stage Plugin Electric Vehicle
Ali, M. A., Keshri, A., Raveendhra, D., et al. (2025) · IEEE International Transportation Electrification Conference (ITEC-India) · doi:10.1109/itec-india67626.2025.11439380
“Different topology such as totem-pole configuration, three-phase full bridge PFC and T-type converter [2] is used to meet the grid harmonics requirements.”
Brakoh, G., Khan, A. A., & Ahmed, H. F. (2026) · IEEE Journal of Emerging and Selected Topics in Industrial Electronics · doi:10.1109/jestie.2026.3680446 · Cited by 1
Kim, K., & Park, W.-C. (2026) · Journal of Electrical Engineering and Technology · doi:10.1007/s42835-026-02748-2
“Therefore, the resistance value was calculated theoretically be included as a precaution against those that lack it [12].”
Integrated LDC-Boost Converter for Non-Isolated V2L Applications in HEVs
Kim, H.-S., Kwon, G.-H., Kwon, Y.-B., & Youn, H.-S. (2026) · Transactions of Korean Society of Automotive Engineers · doi:10.7467/ksae.2026.34.4.383
Monolithic bidirectional 2DHG diamond switch
Kawai, S., Oi, N., Shoji, S., Yoshida, R., Ota, K., Watanabe, A., Ueda, K., Omura, I., & Fujishima, T. (2026) · Applied Physics Express · doi:10.35848/1882-0786/ae5bdd · Cited by 1
Bikinga, W. (2022) · theses.fr (ABES) · doi:10.70675/c4ed607cze2b2z4e7ez9dcfz46d28587aa55 · Cited by 1
Design of a Single-Stage On-Board Charger Sharing a Switch Leg Considering the ZVS Range
Lee, D.-I., Kwon, G.-H., Kim, H.-S., Kwon, Y.-B., & Youn, H.-S. (2026) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2026.3682265
“As the power capacity of the OBC increases, the charging speed of the HV battery improves accordingly [1], [2], [3].”
Dynamic EV Energy Exchange using On-Board Converters
Shreya, M., Praveen, K., Rahul, J., et al. (2026) · doi:10.1109/icmsci67830.2026.11469488
“The sudden development of electric vehicles (EVs), has generated a powerful urge to obtain efficient and reliable solutions in terms of charging [1], [2].”
InfluentialAn Electrolytic-Capacitorless Integrated LDC/V2L Converter for Hybrid Electric Vehicles
Kwon, G.-H., Lee, D.-I., Kim, H.-S., Hwang, J.-S., Jeong, Y., & Youn, H.-S. (2026) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2026.3684940
“In battery electric vehicles (BEVs), the realization of V2L functionality is relatively simple due to the presence of an onboard charger (OBC) that supports bidirectional power transfer [5], [6], [7], [8], [9].”
Electric vehicle based on types, charging levels, and connectors: A review
Priya, & Singh, V. (2026) · AIP conference proceedings · doi:10.1063/5.0329187
Bloor, J., Kamel, T., Fear, S., & Durndell, L. J. (2026) · EcoEnergy · doi:10.1002/ece2.70068 · Cited by 4
“Based on several factors, such as grid demand, battery status, and V2X technology user preferences [27].”
Gupta, J., & Singh, B. (2026) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2026.3689508 · Cited by 1
“Notably, existing OBCs are commonly implemented either in single or dual-stage power architectures [1], [2], [3], [4], [5], [6], [7], [8], [9], [10], [11], [12], [13], [14], [15], [16], [17], [18], [19], [20], [21], [22], [23].”
InfluentialRobust Controller for Single-Stage Isolated Power Conditioning Unit on-Board Charger
Ali, M. A., Keshri, A., Raveendhra, D., et al. (2025) · IEEE International Conference on Smart Technologies for Power, Energy and Control (STPEC) · doi:10.1109/stpec66316.2025.11490294
“In SSOBC the voluminous DC link capacitor is removed and is comprised solely of AC-DC converter, which can provide higher power density and reduce the hardware cost[3].”
Karlekar, A. S., & Karampuri, R. (2025) · IEEE International Conference on Smart Technologies for Power, Energy and Control (STPEC) · doi:10.1109/stpec66316.2025.11490427
A Nonisolated Modified Multiport Bridgeless Zeta Converter for EV Charging With V2X Compatibility
Vishvanath, M., Arunachalam, V., Thomas, J., Chander, A. H., & Thangavel, S. (2026) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2026.3692498
“Recent research has explored various converter topologies and control strategies to address these requirements [13], [14], [15], [16]; however, further improvements are needed to achieve a compact, e ffi cient, and grid-friendly solution suitable for low-and medium-power EV charging applications.”
Sahoo, G. M., Swain, A. K., & Agarwal, V. (2025) · IEEE International Conference on Power Electronics, Smart Grid, and Renewable Energy (PESGRE) · doi:10.1109/pesgre65581.2025.11521272
“Conventional EV chargers typically employ a two-stage architecture [1], [2], an ac-dc front-end followed by an isolated dc-dc converter.”
Technological Pathways for Compact Electric Vehicle Onboard Charger
Rad, S. E., & Mazumder, S. K. (2026) · IEEE International Conference on Intelligent Design and Control of Automation and Drive Systems (IDCD) · doi:10.1109/idcd69431.2026.11519450
“To achieve compact and efficient production of EVs, various factors need consideration, including high efficiency, high power density, high reliability, low cost, low weight, and small volume for the EV charger [8],[9].”
Multi-Port DCX Converter for EV On-Board Charging and Low-Voltage Power Distribution
Sarnago, H., & Lucía, Ó. (2026) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec51134.2026.11516902
“In recent years, considerable effort has been directed toward developing on-board chargers that offer higher efficiency, power density and enhanced overall performance, with the objective of delivering more effective and compact solutions for electric vehicle manufacturers [3, 6, 8, 10].”
Zhao, Y. A., Armstrong, J., Giardine, F., et al. (2026) · IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec51134.2026.11516908
“Illustratively, emerging applications, such as vehicle-to-grid [1] interfaces and renewable energy-storage systems, require converters to transition between charging and grid-injection modes.”
Nonlinear Control of a Three Phase AC/DC Converter for EV Chargers
Oualifi, K., Abouobaida, H., Abouelmahjoub, Y., et al. (2026) · International Conference on Innovative Research in Applied Science, Engineering and Technology (IRASET) · doi:10.1109/iraset68627.2026.11538695
“Single-stage solutions integrate AC/DC and DC/DC functions in a unified converter, while two-stage designs separate the grid-interface rectifier and the battery-interface DC/DC converter, improving modularity, controllability and bidirectional performance [6] , [7] .”
An Integrated Onboard Charger for Tri-Motor Off-Road Electric Vehicles
Afriyie, D., Brakoh, G., Khan, A. A., Jamil, M., & Ahmed, H. F. (2026) · IEEE Journal of Emerging and Selected Topics in Industrial Electronics · doi:10.1109/jestie.2026.3702018
“Most of the integrated OBCs reported in [12], [18], and [22] use permanent magnet synchronous motors (PMSMs), switched reluctance motors, BLDC motors, and induction motors.”
Portable Isolated LLC Converter Enabling EV Charging From Fuel Cell Electric Vehicles
Akkus, M., Boynueğri, A. R., & Akboy, E. (2026) · Fuel Cells · doi:10.1002/fuce.70121
Gui, X., Mansor, N. N., Mokhlis, H., Hatta, S. F. W. M., Halim, S. N. A., Sulaima, M. F., Huang, H., & Yadav, D. (2026) · Journal of Energy Storage · doi:10.1016/j.est.2026.123034 · Cited by 1
Behera, P. K., Hembram, P., Sinha, S., Oram, S., Ray, P., & Senapati, L. (2026) · International Conference on Electrical and Electronics for Sustainable Innovations (ICEESI) · doi:10.1109/iceesi68020.2026.11583690
“In practical scenarios, the battery pack voltage varies over a wide range, from approximately 100 V in deeply discharged conditions to nearly 420 V at rated operation, thereby imposing stringent design and control challenges on ac-dc converter topologies [3].”
Hamad, M., & Yalman, Y. (2026) · Engineering Science and Technology an International Journal · doi:10.1016/j.jestch.2026.102493
Phuong, P. V., Cường, T. H., Loi, B. D., et al. (2026) · International Conference on Green Energy and Applications (ICGEA) · doi:10.1109/icgea69553.2026.11642944
“Recently, advancements in battery technology, power inverters, electric motors, and associated systems have significantly improved the reliability, operational performance [2].”
Rao, B. N., Surabhi, S. L., & Mohan, V. C. J. (2026) · International Conference on Power, Control and Computing Technologies (ICPC2T) · doi:10.1109/icpc2t68221.2026.11646322
“Those autos that were initially only experiments have now turned into a good solution to the problem of air pollution, as well as, for the reduction of the use of non-renewable fossil fuel [1], [2].”
Tiwari, R. R., & Maurya, R. (2026) · Iranian Journal of Science and Technology Transactions of Electrical Engineering · doi:10.1007/s40998-026-01219-8
A Multilevel Converter based EV Charger with G2V/V2G/V2V Features
Pandey, S. K., Das, S., & Maiti, S. (2026) · IEEE International Conference on Sustainable Energy and Future Electric Transportation (SEFET) · doi:10.1109/sefet69291.2026.11687159
“Several types of bidirectional onboard chargers have been reported in [14].”
Karunakalage, D. P., Arachchige, L. W., & Ekanayake, J. B. (2026) · Moratuwa Engineering Research Conference (MERCon) · doi:10.1109/mercon71835.2026.11691325
“Bidirectional charging allows EVs to support household loads and the grid through Grid-to-Vehicle (G2V), Vehicle-to-Home (V2H), and Vehicle-to-Grid (V2G) operation [1], [2].”
K, N. K., & Varun, P. (2026) · doi:10.1109/cmss69636.2026.11689597
“They all interface solar and wind RES through the electrical subsystem, control subsystem, or propulsion subsystem [2].”
A New Integrated Onboard And Wireless Charging Topology
Ramezani, A., Semsar, S., Perry, M., et al. (2026) · IEEE Wireless Power Technology Conference and Expo (WPTCE) · doi:10.1109/wptce66920.2026.11691190
“Conventionally, the OBC is an embedded converter that comprises two stages [11].”
Assessing the Role of Electric Vehicle Availability in the Energy Management Problem
Kia, M., & O’Donnell, T. (2026) · International Conference on Smart Energy Systems and Technologies (SEST) · doi:10.1109/sest67798.2026.11712476
“In addition, real-time operation requires advanced optimization techniques capable of handling uncertainty, variability, and incomplete information [20].”
Simancas, C. E. G., Mascarenhas, M. M., Kazmi, H., & Driesen, J. (2026) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2026.117560
Metadata
- Authors
- Yuan, J., Dorn-Gomba, L., Callegaro, A. D., Reimers, J., & Emadi, A.
- Affiliations
- McMaster University (CA)
- Venue
- IEEE Access
- Published
- 2021
- Volume
- 9
- Pages
- 51501-51518
- ISSN
- 2169-3536 (ISSN-L)
- OpenAlex
- W3147908447
- Cited by
- 390
- References
- 159
- Citations by year
- 2026: 48 · 2025: 94 · 2024: 100 · 2023: 83 · 2022: 49 · 2021: 16
- FWCI
- 18.20
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Locations
- IEEE Access (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Wireless Power Transfer Systems
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electric Vehicles and Infrastructure
- Keywords
- electric vehicles, bidirectional power flow, power electronics topology, two-stage converter, single-stage converter, wide bandgap semiconductors, thermal management, wireless charging, charging efficiency, power density
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol and qwen3.8-omni-flash).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.