A Review of Bidirectional On-Board Chargers for Electric Vehicles
Open accessThe DOI matches its Crossref record; 155 of the 159 references it cites were found in a registry or an index; 19 of the 150 sources its claims cite were checked for support.
Abstract
The fast development of electric vehicles (EVs) provides significant opportunities to further utilize clean energies in the automotive. On-board chargers (OBCs) are widely used in EVs because of their simple installation and low cost. Limited space in the vehicle and short charging time require an OBC to be power-dense and highly efficient. Moreover, the possibility for EVs to deliver power back to the grid has increased the interest in bidirectional power flow solutions in the automotive market. This paper presents a comprehensive overview and investigation on the state-of-the-art solutions of bidirectional OBCs. It reviews the current status, including architectures and configurations, smart operation modes, industry standards, major components, and commercially available products. A detailed overview of the promising topologies for bidirectional OBCs, including two-stage and single-stage structures, is provided. Future trends and challenges for topologies, wide bandgap technologies, thermal management, system integration, and wireless charging systems are also discussed in this paper.
Overview
CoChat Summary
TL;DR
This review surveys bidirectional on-board chargers (OBCs) for electric vehicles, covering architectures, operation modes, standards, components, commercial products, and promising two-stage and single-stage topologies. It finds two-stage designs dominate commercial use, while single-stage high-power bidirectional OBCs remain mostly theoretical despite higher power-density potential.
Key findings
- Bidirectional OBCs enable V2G, V2H, V2L, and V2V; current use is mainly level-2 AC charging from 3.7 kW to 22 kW, while level-3 AC reverse power flow is mostly limited to 6.6–12 kW due to battery degradation and capacity.
- Commercial examples include Texas Instruments’ 6.6 kW SiC OBC at 97% efficiency, Delta-q’s 6.6 kW unit above 96% efficiency and 2.26 kW/L, Wolfspeed’s 6.6 kW unit at 3.3 kW/L and >96.5% peak efficiency, and Current Ways’ 20 kW modular SiC OBC above 97% efficiency and 3.3 kW/L.
- Most commercial bidirectional OBCs use a two-stage structure with a totem-pole PFC front end and CLLC or DAB DC/DC stage; PFC converters commonly exceed 98% efficiency, and DC/DC converters generally exceed 98%, but high power density at high power ratings remains challenging.
- Single-stage OBCs remove the bulky DC-link capacitor and can offer higher power density and lower cost, but most are theoretical, suffer low efficiency and complex control, and no high-power commercial product has been developed to date.
Methods
- Review paper: qualitative synthesis of state-of-the-art bidirectional OBCs, including architectures, configurations, smart operation modes, industry standards, major components, and commercially available products.
- Data sources: published literature, standards documents, and posted information from six commercial examples—Texas Instruments, Delta-q, Wolfspeed, Current Ways, Valeo Siemens, and Eaton—plus discussion of BYD, Tesla, Renault, BMW, Honda, and Nissan examples.
- Main analysis: comparative review of two-stage and single-stage topologies, PFC and DC/DC converter options, wide-bandgap devices, thermal management, system integration, and wireless charging trends, supported by summary tables.
Limitations
- Paper-stated: bidirectional OBCs face additional system cost, reliability burden, low power density, high weight, and complex smart-grid architecture implementation; V2G is still early-stage and not yet applied in the industry due to battery capacity and grid infrastructure limits.
- Paper-stated: frequent charging/discharging causes battery degradation—daily 2-hour frequency regulation is reported to consume 14.3% of battery capacity, and adding peak shaving can take up to 35.6%.
- Evident from text: as a review, it does not describe a systematic literature-search or selection method, and performance comparisons rely on manufacturer-posted or literature data with missing fields, such as power density not being shared by most manufacturers; no independent experimental validation is reported.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
15 Valid · 33 Not valid · 85 Not checked · 107 Own results and interpretations
Every source the paper cites for this claim was checked and supports it.
In the paper
“The high switching frequency of high power-dense bidirectional OBCs results in potential thermal management challenges because of higher switching loss and eddy current loss [72].”
What the sources say
- Supportedcites [72] [72] K. Gupta, C. Da Silva, M. Nasr, A. Assadi, H. Matsumoto, O. Trescases, and C. H. Amon, ''Thermal management strategies for a high-frequency, bi-directional, on-board electric vehicle charger,'' in Proc. 17th IEEE Intersociety Conf. Thermal Thermomechanical Phenomena Electron. Syst. (ITherm) , San Diego, CA, USA, May 2018, pp. 935 943. - source
The Introduction states that higher switching frequency causes thermal-management challenges through higher MOSFET switching losses and considerably higher eddy-current losses in heat sinks. This directly supports the cited sentence. (LLM, conf=0.95)
hedgedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
Every source the paper cites for this claim was checked and supports it.
In the paper
“Moreover, the V2G mode can help to reduce the grid current harmonics. The battery chargers are treated as variable impedance and eliminate the harmonics issue through appropriate ltering methods [45].”
What the sources say
- Supportedcites [45] [45] Z. A. Arfeen, A. B. Khairuddin, A. Munir, M. K. Azam, M. Faisal, and M. S. B. Arif, ''En route of electric vehicles with the vehicle to grid technique in distribution networks: Status and technological review,'' Energy Storage , vol. 2, no. 2, p. e115, Apr. 2020. - source
Section 5 (VEHICLE TO GRID) lists among V2G's advantages the explicit item 'reduce current harmonics' and states 'The inclusion of V2G can give better harmonics filtration'. Section 5.4 (Harmonic filtering) supplies the second half of the sentence: EV/power chargers 'act as a variable impedance for discrete frequencies and resolves the harmonic issues with an appropriate filtering method.' Both parts of the paraphrase are stated in our copy. (LLM, conf=0.90)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Most manufacturers study the totem-pole PFC topology as the front-end stage and DAB or CLLC topologies as the back-end stage.”
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“To this day, there are only a few bidirectional single-stage OBCs used in the automobile industry.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“However, no commercial product has been developed to this day.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
39 more claims
Create a free account to see all 240 claims and to verify the 7 references still open.
- It may state two separate claims as one. 112
- Probably not a substantial claim. 130
- The quote only partly states this claim. 2
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source doesn’t support the claim as written.
In the citing paper
“The study in [52] includes very few selected bidirectional OBCs, consisting of a report on the power density of four industrial OBCs.”
From On-Board Chargers for Electric Vehicles: A Comprehensive Performance and Efficiency Review (2024) · cites this paper as [52]
Checked by a reasoning model — may be wrong.
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ TABLE 4. Bidirectional PFC summary. · p. 8
“the converter achieves up to 98.86% ef ciency at a 1.6kW power level [78].”
§ TABLE 4. Bidirectional PFC summary. · p. 8
“| | Three-phase | CRM | 85-265 | 390 | 450-1000 | 1.6 | 98.7 | >15 | GaN | >0.99 |”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ C. STANDARDS · p. 4
“the total harmonic distortion (THD) of currents should be less than 7% to comply with the Institute of Electrical and Electronics Engineers (IEEE) 519 requirements [54].”
§ 1) EMI FILTERS · p. 5
“Recommended practice and requirements for stable harmonics limitation of the voltage and current (THD<8%)”
Citations
Cites
Yilmaz, M., & Krein, P. T. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2212917 · Cited by 3,118
A Review of Three-Phase Improved Power Quality AC–DC Converters
Singh, B., Singh, B. N., Chandra, A., Al-Haddad, K., Pandey, A., & Kothari, D. P. (2004) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2004.825341 · Cited by 1,728 · cited 1×
“In addition to single-phase PFC topologies, a lot of research is being undertaken on three-phase bidirectional PFC converters like the full-bridge converter [95], NPC [93], T-type [96] and matrix converter [97]–[99].”
BackgroundA review of single-phase improved power quality ac~dc converters
Singh, B., Singh, B. N., Chandra, A., Al-Haddad, K., Pandey, A., & Kothari, D. P. (2003) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2003.817609 · Cited by 1,297 · cited 1×
“For example, single-phase bidirectional full-bridge converters, and their variants are popular but suffer high power losses [85]–[87].”
BackgroundModern Trends in Inductive Power Transfer for Transportation Applications
Covic, G. A., & Boys, J. T. (2013) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2264473 · Cited by 1,263 · cited 1×
“Many methods are proposed like road built-in pad [160], pad array-based coupling technique [161], and segmental track strategy [162].”
MethodReview of Commercial GaN Power Devices and GaN-Based Converter Design Challenges
Jones, E. A., Wang, F. F., & Costinett, D. (2016) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2016.2582685 · Cited by 1,259 · cited 1×
“GaN semiconductors reaches up to 650V, these devices are becoming an attractive solution for OBCs [142].”
BackgroundUsing fleets of electric-drive vehicles for grid support
Tomić, J., & Kempton, W. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.03.010 · Cited by 1,018 · cited 1×
“A variable DC-link voltage of the PFC converter can mitigate this disadvantage, but the resonant tank needs to be carefully designed to cover that wide-voltage range [125], [126].”
BackgroundSchweizer, M., & Kolar, J. W. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2203151 · Cited by 1,006 · cited 14×
“[96] M. Schweizer and J. W. Kolar, ‘‘Design and implementation of a highly efficient three-level T-type converter for low-voltage applications,’’ IEEE Trans.”
BackgroundMethodInfluentialPerformance Evaluation of Bridgeless PFC Boost Rectifiers
Huber, L., Jang, Y., & Jovanovic, M. M. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2008.921107 · Cited by 865
Un-Noor, F., Padmanaban, S., Mihet-Popa, L., Mollah, M., & Hossain, E. (2017) · Energies · doi:10.3390/en10081217 · Cited by 809 · cited 1×
“However, they do not concentrate on the research and application of the bidirectional OBC [1], [13], [25], [26].”
BackgroundThe Essence of Three-Phase PFC Rectifier Systems—Part I
Kolar, J. W., & Friedli, T. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2197867 · Cited by 788
Research works printed but not linked: 17
- 2017, Electrical and electronics technical team roadmap
- 2018, IEEE Standard for Interconnection and Interoperability of Distributed Energy Resources with Associated Electric Power Systems Interfaces
- 1994, Auto-Delivery
- 2017, bar IEC Webstore
- 2020, Power Quality Requirements for Plug-in Vehicle Chargers
- 2014, IEEE Recommended Practices and Requirements for Harmonic Control in Electrical Power Systems
- goswami, 2017, Thermal management of on-board chargers in E-vehicles, Electron Cooling
- 2019, On Board Charger (OBC) LLC Converter
- 2020, TIDM-1007 High Efficiency GaN CCM Totem Pole Bridgeless Power Factor Correction (PFC) Reference Design
- 2019, Electrically Propelled Vehicles
- plugs, 2014, Vehicle connectors and vehicle inlets conductive charging of electric vehicles Part 1, 2, 3, IEC Standard, 62196, 1
- contact, 2014, Charging technology for E-mobility—Product overview 2017, Inspiring Innov, 2, 1
- 2019, Infineon
- 2020, On Board Charger (OBC) Three-Phase PFC Converter
- 2020, 6 6 kw High Power Density Bi-Directional EV on-Board Charger
- 2013, On-Board Charger Specifications Eaton
- 2019, TIDA-010054 Bi-Directional Dual Active Bridge Reference Design for Level 3 Electric Vehicle Charging Stations
Cited by
Electric Vehicle-to-Grid (V2G) Technologies: Impact on the Power Grid and Battery
Mojumder, M. R. H., Ahmed Antara, F., Hasanuzzaman, M., Alamri, B., & Alsharef, M. (2022) · Sustainability · doi:10.3390/su142113856 · Cited by 306
Bidirectional Onboard Chargers for Electric Vehicles: State-of-the-Art and Future Trends
Wouters, H., & Martinez, W. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3319996 · Cited by 280
“Key standards are SAE J2894, IEC 61000, and GB/T 14549 [18], [21], [97].”
BackgroundInfluentialA Review on UAV Wireless Charging: Fundamentals, Applications, Charging Techniques and Standards
Chittoor, P. K., Chokkalingam, B., & Mihet-Popa, L. (2021) · IEEE Access · doi:10.1109/access.2021.3077041 · Cited by 269
“…UAV protocol data [200], avoiding charging conflicts [169]–[174], design of novel coil structures [149], [151], [152], drone to drone (V2V) charging [175], Supercapacitor based fast charging [176], dynamic charging of UAV during long flight hours [177], [178], Efficient battery management of UAV for…”
BackgroundSingh, A. R., Vishnuram, P., Alagarsamy, S., Bajaj, M., Blazek, V., Damaj, I., Rathore, R. S., Al-Wesabi, F. N., & Othman, K. M. (2024) · Alexandria Engineering Journal · doi:10.1016/j.aej.2024.06.093 · Cited by 183
Upputuri, R. P., & Subudhi, B. (2023) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2023.3289965 · Cited by 180
“The state-of-the-art converter topologies were reviewed in [8], [9], [10], [11], [12], [13], [14], [15], [16], [17], and [18], as listed in Table I.”
BackgroundIslam, S., Iqbal, A., Marzband, M., Khan, I., & Wahedi, A. A. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112574 · Cited by 176
A comprehensive overview of vehicle to everything (V2X) technology for sustainable EV adoption
Rehman, M. A., Numan, M., Tahir, H., Rahman, U., Khan, M. W., & Iftikhar, M. Z. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.109304 · Cited by 169
Wide Band Gap Devices and Their Application in Power Electronics
Kumar, A., Moradpour, M., Losito, M., Franke, T., Ramasamy, S., Baccoli, R., & Gatto, G. (2022) · Energies · doi:10.3390/en15239172 · Cited by 158
“In the case of AC charging, the power level is up to 43.5 kW [114].”
BackgroundInfluentialOn-Board Chargers for High-Voltage Electric Vehicle Powertrains: Future Trends and Challenges
Pradhan, R., Keshmiri, N., & Emadi, A. (2023) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2023.3251992 · Cited by 142
“(V2X) connectivity features have also been addressed [11].”
BackgroundSelf-citationElectric bus coordinated charging strategy considering V2G and battery degradation
Manzolli, J. A., Trovão, J. P. F., & Antunes, C. H. (2022) · Energy · doi:10.1016/j.energy.2022.124252 · Cited by 118
A comprehensive review of vehicle-to-grid integration in electric vehicles: Powering the future
Kumar, P., Channi, H. K., Kumar, R., Rajiv, A., Kumari, B., Singh, G., Singh, S., Dyab, I. F., & Šajić, J. L. (2024) · Energy Conversion and Management X · doi:10.1016/j.ecmx.2024.100864 · Cited by 209
Alrubaie, A. J., Salem, M., Yahya, K. A., Mohamed, M., & Jamil, M. K. M. (2023) · Sustainability · doi:10.3390/su15108122 · Cited by 127
“Dynamic inductive charging, however, permits WC while an EV is in motion [47,48].”
BackgroundGrid Integration of DC Buildings: Standards, Requirements and Power Converter Topologies
Carvalho, E. L., Blinov, A., Chub, A., Emiliani, P., Carne, G. D., & Vinnikov, D. (2022) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2022.3217741 · Cited by 94
“[84]: the paper presents a review of onboard”
BackgroundRana, M. M., Alam, S., Rafi, F. A., Deb, S. B., Agili, B., He, M., & Ali, M. H. (2025) · IEEE Access · doi:10.1109/access.2025.3538663 · Cited by 126
“A detailed examination of bidirectional on-board chargers considering wide bandgap technologies for commercially available products is presented in [16].”
An Isolated Multiport DC–DC Converter for Integrated Electric Vehicle On-Board Charger
Kougioulis, I., Pal, A., Wheeler, P. W., & Ahmed, M. R. (2023) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2023.3276048 · Cited by 89
Review on classification of resonant converters for electric vehicle application
Gore, S., Iqbal, A., Islam, S., Khan, I., Marzband, M., Rahman, S., & Wahedi, A. A. (2021) · Energy Reports · doi:10.1016/j.egyr.2021.12.013 · Cited by 110
Mudiyanselage, G. A., Keshmiri, N., & Emadi, A. (2023) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2023.3331180 · Cited by 104
“Many countries have set goals for electrified transportation and policies to provide government incentives to support the development of EVs [1].”
BackgroundInfluentialSelf-citationSaleh, A. M., Vokony, I., Waseem, M., Khan, M. A., & Alareqi, A. G. (2025) · Energy Reports · doi:10.1016/j.egyr.2025.02.001 · Cited by 82
Optimal Utilization of Bidirectional EVs for Grid Frequency Support in Power Systems
Kazemtarghi, A., Dey, S., & Mallik, A. (2022) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2022.3203654 · Cited by 71
“According to their design characteristics, bidirectional EVs can operate in grid-to-vehicle (G2V) mode as loads, and vehicle-to-grid (V2G) mode as distributed generation units [1], [2].”
BackgroundOverview on Battery Charging Systems for Electric Vehicles
Dini, P., Saponara, S., & Colicelli, A. (2023) · Electronics · doi:10.3390/electronics12204295 · Cited by 68
Electric Vehicle-to-Vehicle Energy Transfer Using On-Board Converters
Shafiqurrahman, A., Umesh, B. S., Sayari, N. A., & Khadkikar, V. (2022) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2022.3172029 · Cited by 59
Akhtar, M. F., Raihan, S. R. S., Rahim, N. A., Akhtar, M. N., & Bakar, E. A. (2023) · Applied Sciences · doi:10.3390/app13031676 · Cited by 62
Electric Vehicle-to-Vehicle (V2V) Power Transfer: Electrical and Communication Developments
Shafiqurrahman, A., Khadkikar, V., & Rathore, A. K. (2023) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2023.3345738 · Cited by 61
“On-board chargers are divided into single-and three-phase chargers and are characterized by small size, weight, and lower cost [41], [42], [95], [126], [127], [128].”
BackgroundA Soft-Switched Single-Stage Single-Phase PFC Converter for Bidirectional Plug-In EV Charger
Patel, N., Lopes, L. A. C., Rathore, A. K., & Khadkikar, V. (2023) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2023.3270387 · Cited by 64
“Single-stage OBCs are potential candidates for providing power quality enhancements like reactive power compensation, power factor correction, voltage regulation, and vehicleto-grid (V2G) functionalities, such as frequency regulation and peak shaving [30].”
BackgroundLi, T., Li, S., Liu, Z., Fang, Y., Xiao, Z., Shafiq, Z., & Lu, S. (2024) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2024.3369079 · Cited by 53
Jin, F., Nabih, A., Yuan, T., & Li, Q. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3354679 · Cited by 63
“Many research works have been presented with this two-stage solution [6], [7], [8], [9], [10].”
BackgroundFeedforward Repetitive Approach to Disturbance Rejection in DAB Converters for EV Charging
Pal, P., Behera, R. K., & Muduli, U. R. (2025) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2024.3519565 · Cited by 45
On-Board Chargers for Electric Vehicles: A Comprehensive Performance and Efficiency Review
Dar, A. R., Haque, A., Khan, M. A., Kurukuru, V. S. B., & Mehfuz, S. (2024) · Energies · doi:10.3390/en17184534 · Cited by 45
“SAEJ2847 [52] and SAEJ2836 [52,56] Communication requirements between an EV and power grid.”
InfluentialOverview of Sustainable Mobility: The Role of Electric Vehicles in Energy Communities
Menyhárt, J. (2024) · World Electric Vehicle Journal · doi:10.3390/wevj15060275 · Cited by 52
“V2G offers promising solutions to increase the stability of electric grids and integrate renewable energy sources, but numerous regulatory and technical challenges need to be overcome [178–180].”
BackgroundAvila, A., Garcia‐Bediaga, A., Alzuguren, I., Vasić, M., & Rujas, A. (2021) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2021.3107951 · Cited by 43
“6–11 kW [2]–[5] and this is another driver toward the research of highly efficient and power-dense ac–dc converters.”
BackgroundZhang, B., Deng, J., Wang, W., et al. (2022) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2022.3175806 · Cited by 41
“a detrimental effect on the performance and reliability of chargers [3].”
BackgroundAdhikary, S., Biswas⃰, P. K., Sain, C., Babu, T. S., & Nwulu, N. I. (2023) · Energy Reports · doi:10.1016/j.egyr.2023.04.358 · Cited by 43
Bay, O., Tran, M. T., Baghdadi, M. E., Chakraborty, S., & Hegazy, O. (2023) · Energies · doi:10.3390/en16083433 · Cited by 53
“In summary, many V2X functions have not yet been fully commercialized, and research on GaN-based topologies for such functions is still in its early stages of development [27].”
BackgroundSun, Q., Xie, H., Liu, X., Niu, F., & Gan, C. (2023) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2023.3240434 · Cited by 46
Ravindran, R., & Massoud, A. M. (2025) · Microelectronic Engineering · doi:10.1016/j.mee.2025.112348 · Cited by 56
V2G based bidirectional EV charger topologies and its control techniques: a review
Rana, R., Saggu, T. S., Letha, S. S., & Bakhsh, F. I. (2024) · Discover Applied Sciences · doi:10.1007/s42452-024-06297-z · Cited by 66
“It has a lower cost, but the charging time is very high (10–12 h) [32].”
Electric Mobility: An Overview of the Main Aspects Related to the Smart Grid
Barreto, R., Faria, P., & Vale, Z. (2022) · Electronics · doi:10.3390/electronics11091311 · Cited by 38
“In [18], the authors investigated the state-of-the-art solutions of bidirectional on-board charges used by EVs.”
BackgroundInfluentialComprehensive review of battery charger structures of EVs and HEVs for levels 1–3
Kattel, M. B. E., Mayer, R., Ely, F., & Filho, B. J. C. (2023) · International Journal of Circuit Theory and Applications · doi:10.1002/cta.3579 · Cited by 38
Novel Bidirectional On-Board Charger for G2V and V2X Applications on Wide-Range Batteries
Lin, J. C., Chiu, H., Tzeng, M.-S., Yeh, J.-W., & Huang, C.-H. (2024) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2024.3367874 · Cited by 36
“Due to the characteristics of wide output range of batteries, bidirectional ac/dc and bidirectional wide voltage range of dc/dc are extremely popular to research and implement for OBC [1], [2], [3], [4], [5], [6], [7].”
BackgroundSaadaoui, A., & Ouassaid, M. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.110854 · Cited by 35
Review on Control Techniques for EV Bidirectional Wireless Chargers
Triviño, A., González‐González, J. M., & Castilla, M. (2021) · Electronics · doi:10.3390/electronics10161905 · Cited by 32
“Some of them are common with on-board conductive chargers [78], but others are specific for wireless chargers due to the challenges imposed by the wireless power transfer technology.”
BackgroundEV Battery Charging using DAB DC-DC Converter with EPS and DPS modulations
Mishra, M., & Sarkar, I. (2023) · IEEE International Students' Conference on Electrical, Electronics and Computer Science (SCEECS) · doi:10.1109/sceecs57921.2023.10063090 · Cited by 34
“Several DC-DC converter topologies are discussed and are found appropriate for EV battery charging applications in [15].”
BackgroundHarmonics Measurement, Analysis, and Impact Assessment of Electric Vehicle Smart Charging
Senol, M., Bayram, I. S., Hunter, L., Sevdari, K., McGarry, C., Campos‐Gaona, D., Gehrke, O., & Galloway, S. (2024) · IEEE Open Journal of Vehicular Technology · doi:10.1109/ojvt.2024.3505778 · Cited by 39
“EVs are electrical loads that connect to the power grid via power electronics-based on-board chargers [23].”
Kim, H., Park, J., Lee, J., & Choi, S. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3165182 · Cited by 32
“structure that includes bulky electrolytic capacitors [6]–[21] and have power density of lower than 2 kW/L [20].”
BackgroundMeraj, S., Mekhilef, S., Mubin, M. B., Ramiah, H., Seyedmahmoudian, M., & Stojcevski, A. (2025) · IEEE Access · doi:10.1109/access.2025.3561396 · Cited by 51
“Effective gate signal generation is a challenging undertaking that requires synchronization with other legs in the power converter and with converters elsewhere [78].”
Lara, J., Hernández, C., Arjona, M. A., Masisi, L., & Chandra, A. (2022) · IEEE Access · doi:10.1109/access.2022.3167694 · Cited by 28
“Several EV charger topologies can be found in literature [22], [23].”
BackgroundZhu, H., Hu, S., Tahir, M., Bai, Y., & Wu, X. (2023) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2023.3329028 · Cited by 29
“Therefore, compact OBC design with high power density and efficiency is the research community’s that focus nowadays [4], [5], [6], [7], [8], [9], [10].”
BackgroundA Bidirectional CLLC Resonant Converter for EV Battery Charger Applications
Takarli, R., Adib, M., Vahedi, A., & Beiranvand, R. (2023) · Power Electronics, Drive Systems, and Technologies Conference (PEDSTC) · doi:10.1109/pedstc57673.2023.10087140 · Cited by 29
“A review of a bidirectional onboard charger is presented in [24] which also contains standard references regarding the PFC stage, safety connector type, and V2G mode.”
BackgroundNdhlovu, E., Mhlanga, D., & Duri, B. (2025) · Discover Global Society · doi:10.1007/s44282-025-00201-9 · Cited by 23
“However, EVs are generally considered to be as safe as, and in some cases safer than, gasoline-powered vehicles in terms of crash safety.”
Pid Switching Controller for Ripple Free Single Phase Interleaved Buck Converter
Tamilamuthan, R., Geetha, B. T., & Sreedevi, S. (2025) · International Conference on Inventive Research in Computing Applications (ICIRCA) · doi:10.1109/icirca65293.2025.11089691 · Cited by 22
“[ 13] reviewed bidirectional chargers for grid-connected EVs, focusing on system architecture rather than power conversion control.”
Nuez, I., Ruiz-García, A., & Osorio, J. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.133252 · Cited by 22
Ramos, L. A., Kan, R. F. V., Mezaroba, M., & Batschauer, A. L. (2022) · Electronics · doi:10.3390/electronics11040650 · Cited by 25
Single-Phase, Bidirectional, 7.7 kW Totem Pole On-Board Charging/Discharging Infrastructure
Kumar, V., & Yi, K. (2022) · Applied Sciences · doi:10.3390/app12042236 · Cited by 21
A novel high‐gain bidirectional DC–DC converter for EV onboard charger applications
Krishna, B., Lithesh, G., & Karthikeyan, V. (2022) · International Journal of Circuit Theory and Applications · doi:10.1002/cta.3268 · Cited by 21
Rao, J. V. G. R., & Venkateshwarlu, S. (2024) · Journal of Engineering and Applied Science · doi:10.1186/s44147-024-00384-z · Cited by 31
“Power factor correction, voltage regulation, and dynamic adaptation are implemented via an on-board charging unit with an adaptive sliding mode controller [9].”
BackgroundMethodAlrubaie, A. J., Swadi, M., Salem, M., Richelli, A., Bughneda, A., & Jamil, M. K. M. (2024) · Energies · doi:10.3390/en17071575 · Cited by 27
Ahmadian, A., Sedghisigarchi, K., & Gadh, R. (2024) · IEEE Access · doi:10.1109/access.2024.3396449 · Cited by 25
“For example, the nonlinear behavior of inverters/converters as well as the parasitic effects often seen in onboard chargers for electric vehicles, including harmonic distortion, battery stress, etc., introduce significant complexities to the system models [18].”
BackgroundJo, C.-H., & Kim, D.-H. (2024) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2024.3429579 · Cited by 19
Metwly, M. Y., Ahmed, M. M., Hemeida, A., Abdel-Khalik, A. S., Hamad, M. S., Belahcen, A., Ahmed, S., & Elmalhy, N. A. (2022) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2022.3197451 · Cited by 19
“ELECTRIC vehicles (EVs), the optimal alternative to fossil-fueled vehicles, promote the emission-free future envisaged for the automotive industry since they utilize clean energy [1].”
BackgroundBidirectional Power Converters for EV Battery Chargers
Monteiro, V., Afonso, J. A., & Afonso, J. L. (2023) · Energies · doi:10.3390/en16041694 · Cited by 23
A Bidirectional Bridgeless Converter-Based Electric Vehicle Charger
Sharma, U., & Singh, B. (2023) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2023.3317359 · Cited by 18
“Considering these advantages of bidirectional operation, a comprehensive study is carried out on the single-stage bidirectional EV chargers [17], [18], [19], [20], [21], [22].”
BackgroundPerformance of bidirectional ON-Board Charger in Electric Vehicle: A review
Sethuraman, R., & Mageshvaran, R. (2024) · e-Prime - Advances in Electrical Engineering Electronics and Energy · doi:10.1016/j.prime.2024.100613 · Cited by 24
Zhang, D., Kaufmann, J., Huber, J., Kasper, M., Deboy, G., & Kolar, J. W. (2024) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2024.3407373 · Cited by 27
“…dc/dc-stage with a high-frequency (HF) transformer; both the options insert a large common-mode (CM) impedance between the grid and the vehicle that limits the ground current and ultimately ensures electrical safety [21], [22], [23], [24], [25], [26], [27], [28], [29], [30], [31], [32], [33], [34].”
Zhou, K., Huang, Y., & Zheng, S. (2023) · IEEE Access · doi:10.1109/access.2023.3314510 · Cited by 17
Elaadouli, N., Lajouad, R., Magri, A. E., Mansouri, A., & Mezdi, K. E. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.114382 · Cited by 16
Naseem, H., Goswami, P., Choi, K., Iqbal, A., & Hakami, H. (2026) · Applied Sciences · doi:10.3390/app16041748 · Cited by 27
Anjinappa, G., Prabhakar, D. B., & Lai, W. (2022) · World Electric Vehicle Journal · doi:10.3390/wevj13110196 · Cited by 16
“However, the advancement of EVs has made their promise as a portable energy source more apparent [20].”
BackgroundLangbauer, T., Connaughton, A., Vollmaier, F., Huang, Z., Krischan, K., & Petrella, R. (2023) · IEEE Access · doi:10.1109/access.2023.3308687 · Cited by 16
“ferent input and output voltages [1], [2], [3], [4].”
BackgroundJin, F., Yuan, T., Nabih, A., & Li, Q. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3436044 · Cited by 19
Alamayreh, M. I., Alamayreh, A., & Amer, A. A. (2025) · Discover Sustainability · doi:10.1007/s43621-025-01255-0 · Cited by 19
“In contrast, bidirectional chargers enable power flow in both directions, namely, grid-to-EV (G2V) or EV-to-grid (V2G), supporting applications such as vehicle-to-grid (V2G), vehicle-to-home (V2H), and vehicle-to-load (V2L) [3, 4].”
Zero Torque Integrated On-Board EV Battery Charger With Enhanced Winding Filter Inductance
Shao, M., Zhang, Q., Wei, Z., & Guang, H. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3400837 · Cited by 15
“Thistype ofchargeroffersmanyadvantagesintermsofcostandpower densitycomparedtootherbatterychargers,suchasoff-board chargers [6], [7] and independent on-board chargers [8], [9].”
BackgroundHakam, Y., Gaga, A., Tabaa, M., & Hadadi, B. E. (2024) · Energies · doi:10.3390/en17133095 · Cited by 22
“The study being conducted now focuses on the mature development of these modes of operation [11,16].”
BackgroundYuan, J., Poorfakhraei, A., Zhang, Y., Fang, G., Liu, C., & Emadi, A. (2023) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2023.3324885 · Cited by 14
“Off-board chargers provide fast power transfer but are limited in development due to high infrastructure cost [6].”
BackgroundSelf-citationVariable-Winding-Based Highly Integrated Electric-Drive-Reconstructed System for SRM-Based EVs
Sun, Q., Zhang, H., Liu, X., Niu, F., & Gan, C. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3367939 · Cited by 14
Design of a 7.5 kW Dual Active Bridge Converter in 650 V GaN Technology for Charging Applications
Alemanno, A., Morici, R., Pretelli, M., et al. (2023) · Electronics · doi:10.3390/electronics12061280 · Cited by 13
“Concerning the DC section, among the different topologies investigated [2,3], the most promising are the CLLC [4] and dual active bridge (DAB) [5] isolated converters.”
Grid Integrated Bidirectional EV Battery Charger in V2G-G2V Mode With Improved Power Quality
Dixit, A., Swarnkar, P., & Nema, R. (2023) · IEEE International Students' Conference on Electrical, Electronics and Computer Science (SCEECS) · doi:10.1109/sceecs57921.2023.10062990 · Cited by 15
“Classification of bidirectional on-board charger [39]”
Yang, J., Xu, Y., Wu, X., & Muhammad, F. (2023) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2023.3327119 · Cited by 15
“For the OBCs, the typical structure contains a power factor correction (PFC) stage and an isolated dc/dc stage [3], [4], [5].”
BackgroundSarnago, H., & Lucía, Ó. (2024) · IEEE Open Journal of the Industrial Electronics Society · doi:10.1109/ojies.2024.3406732 · Cited by 16
“Moreover, in recent years, the interest in multiphase and bidirectional implementations [8], [9] has significantly increased.”
BackgroundHaroon, F., Aamir, M., Waqar, A., et al. (2022) · Energies · doi:10.3390/en16010346 · Cited by 13
A Fixed Frequency Zero-Voltage-Switching On-Board EV Charger
Hu, C., Wang, R., Shi, Y., Jia, X., & Xu, D. (2021) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2021.3133618 · Cited by 13
He, Y., Liu, H., Zhang, J., Shen, C., Xie, X., & Hang, L. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3324008 · Cited by 14
“I N TERMS of electric vehicle charging applications, the two-stage ac/dc converter is mainly composed of a power-factor-correction (PFC) circuit and an isolated dc/dc conversion circuit [1],[2].”
MethodAdhikary, S., Biswas⃰, P. K., Babu, T. S., et al. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-28955-2.00012-3 · Cited by 12
Bayram, I. S., & Shi, X. (2024) · IEEE Open Journal of Vehicular Technology · doi:10.1109/ojvt.2024.3474426 · Cited by 17
Research Review on Power Quality Improvement in Distribution Networks via Charging Pile Integration
Chen, S., Zhou, J., & Sun, Y. (2025) · Electronics · doi:10.3390/electronics14071284 · Cited by 16
Islam, S., Muyeen, S. M., Iqbal, A., Bakhsh, F. I., & Ben‐Brahim, L. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.117563 · Cited by 17
Gholipoor, N., Rasti, M., Aghaei, F., Aghdam, F. H., Kharbouch, A., Talaeizadeh, V., Aghaei, J., & Rakha, H. A. (2025) · IEEE Open Journal of Intelligent Transportation Systems · doi:10.1109/ojits.2025.3593437 · Cited by 18
“Therefore, optimizing driving route and smart navigation can enhance EE and improve driving range [132].”
Chaurasiya, S., & Singh, B. (2022) · IEEE Transportation Electrification Conference and Expo · doi:10.1109/itec53557.2022.9813778 · Cited by 14
“Furthermore, during whole charging range efficiency variation is also a major concern, which varies from 82% to 97% from cut-off region to maximum power transfer region [3].”
BackgroundMethodYuan, J., Poorfakhraei, A., & Emadi, A. (2023) · IEEE Transportation Electrification Conference and Expo · doi:10.1109/itec55900.2023.10186927 · Cited by 13
“However, the two-stage structure of the power factor correction (PFC) AC/DC converter and DC/DC converter limits the power density [2].”
BackgroundSelf-citationRishishwar, V., & Ojha, A. (2023) · IEEE International Conference on Renewable Energy and Sustainable E-Mobility (RESEM) · doi:10.1109/resem57584.2023.10236016 · Cited by 12
A Novel Integrated OBC and LDC System With Flux Path Reconfiguration for Electric Vehicles
Jo, C.-H., Jeong, T.-J., Li, G., & Kim, D.-H. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3459915 · Cited by 11
“…for charging HVB, and 3) low-voltage dc–dc converters (LDC) for charging LVB. Additionally, with the increasing battery capacities aimed at extending EV driving ranges, bidirectional OBCs capable of both grid-to-vehicle (G2V) and vehicle-to-grid (V2G) operations have recently been required [5].”
Vijayakumar, S., & Sudhakar, N. (2024) · Results in Engineering · doi:10.1016/j.rineng.2024.102942 · Cited by 11
A Bidirectional On-Board Charging System for LEVs
Gupta, J., & Singh, B. (2021) · IEEE International Conference on Smart Technologies for Power, Energy and Control (STPEC) · doi:10.1109/stpec52385.2021.9718701 · Cited by 12
Paucara, J. D., Peña, J. C. U., & y Rosas, D. S. (2024) · IEEE Open Journal of the Industrial Electronics Society · doi:10.1109/ojies.2024.3394290 · Cited by 17
“…since typical EVBCs implement GFL control strategies and its power structure is based on a dual active bridge (DAB) dc–dc for galvanic isolation [26], [27], novel control strategies along with different procedures to size the dc-link capacitors should be developed to implement VI and long-term…”
BackgroundOsman, F. A., Eltokhy, M. A. R., Hashem, A. Y. M., & Hashem, M. Y. M. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.112307 · Cited by 16
A Novel Multimode AC-DC LLC Resonant Converter for Wide Output Voltage Range Applications
Meng, H., Dong, H., & Xie, X. (2024) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2024.3493165 · Cited by 10
“2 [3].”
Deepti, T., Deepa, K., Stonier, A. A., Peter, G., Anoop, A., & Ganji, V. (2025) · IET Circuits Devices & Systems · doi:10.1049/cds2/6336609 · Cited by 13
“Economic bene fi ts: Owners of EVs have the opportunity to generate income by engaging in grid-related services and energy trading when their EVs are not actively being used [36].”
Unraveling the Smart Charging Technologies, Energy Sources, and Regulatory Standards for EVs
Arooj, A., Ahmed, Q. Z., Farooq, S., Umer, T., Aslam, N., & Alade, T. T. (2025) · IEEE Access · doi:10.1109/access.2025.3579428 · Cited by 14
A Bidirectional Charging System for Electric Two-Wheelers and Three Wheelers
Singh, B., & Gupta, J. (2022) · IEEE Global Conference on Computing, Power and Communication Technologies (GlobConPT) · doi:10.1109/globconpt57482.2022.9938214 · Cited by 11
“However, for light EVs, the focus is majorly limited to only unidirectional charger’s topologies [3][5][6], i.e., an improved power quality charging system with bidirectional power flow capability for E2Ws and E3Ws charging applications still overlooked.”
BackgroundInfluentialBalamurugan, R., RamKumar, P., Singaraj, B., et al. (2022) · International Conference on Artificial Intelligence and Smart Energy (ICAIS) · doi:10.1109/icais53314.2022.9743050 · Cited by 10
Bidirectional LLC-DAB Converter for Battery Charger Applications: Analysis and Design
Sadeghian, S., Adib, M., Talebi, N., et al. (2024) · doi:10.1109/icredg61679.2024.10607814 · Cited by 9
Metadata
- Authors
- Yuan, J., Dorn-Gomba, L., Callegaro, A. D., Reimers, J., & Emadi, A.
- Affiliations
- McMaster University (CA)
- Venue
- IEEE Access
- Published
- 2021
- Volume
- 9
- Pages
- 51501-51518
- ISSN
- 2169-3536 (ISSN-L)
- OpenAlex
- W3147908447
- Cited by
- 390
- References
- 159
- Citations by year
- 2026: 48 · 2025: 94 · 2024: 100 · 2023: 83 · 2022: 49 · 2021: 16
- FWCI
- 18.20
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Locations
- IEEE Access (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Wireless Power Transfer Systems
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electric Vehicles and Infrastructure
- Keywords
- electric vehicles, bidirectional power flow, power electronics topology, two-stage converter, single-stage converter, wide bandgap semiconductors, thermal management, wireless charging, charging efficiency, power density
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol and qwen3.8-omni-flash).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.