Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges
Open accessThe DOI matches its Crossref record; 341 of the 341 references it cites were found in a registry or an index; 24 of the 225 sources its claims cite were checked for support.
Abstract
The issues of monitoring and fault diagnosis of drives with permanent magnet synchronous motors (PMSM) are currently very topical due to the increasing use of these drives in safety-critical devices. Every year, more and more articles on this subject are published. Therefore, the aim of this article is to update the overview of diagnostic methods and techniques for PMSM drives. Each of the main chapters of the article focuses on a specific element of the drive system (motor, power converter, measuring sensors), with particular emphasis on the components of the motor (stator windings, magnets, bearings, rotor). The main sections on PMSM fault diagnosis are divided according to the type of methods used to obtain the symptoms of the damage. In addition, a review of methods using the analysis of control structure signals for the diagnosis of damage to a vector-controlled motor is presented, as well as the latest achievements of researchers in the field of shallow and deep neural networks for the detection and classification of PMSM drives failures. Based on the presented literature analyses, some development trends and challenges related to the development of diagnostics and fault-tolerant control of PMSM drives are discussed in the conclusion part.
Overview
CoChat Summary
TL;DR
This IEEE Access review surveys fault diagnosis and fault-tolerant control (FTC) for permanent magnet synchronous motor (PMSM) drives, covering motor, converter, and sensor faults and methods based on signal analysis, mathematical models, control-structure signals, and artificial intelligence. It synthesizes the literature and identifies future challenges in transient diagnostics, multiple-fault diagnosis, AI/deep learning, hardware implementation, and prognostics.
Key findings
- The review classifies PMSM faults into electrical, magnetic, and mechanical types and cites component failure statistics: stator winding failures account for 36–66% of AC motor breakdowns, bearing faults 13–41%, bearing failures about 40–50% of all electric motor failures, power semiconductor device damages about 35% of all adjustable-speed-drive faults, DC-link capacitors about 30% of frequency-converter failures, and transistor failures 12% of all electric-drive failures.
- Signal-analysis methods dominate PMSM diagnostics: FFT/MCSA/EPVA are widely used for inter-turn short circuits (ITSCs) and demagnetization, while time-frequency methods such as STFT, WT, WVD, CWD, and HHT address non-stationary conditions; control-structure signals can enable sensorless diagnostics but are sensitive to controller bandwidth.
- AI-based diagnostics are reviewed: shallow neural networks (MLP, RBF, SOM, PNN, BNN) require preprocessing, while deep networks (CNN, LSTM) allow direct feature extraction; Table IX reports literature classification accuracies such as MLP 99.02% on vibrations, CNN 99.38% on flux, CNN 99.28% on stator currents, and SOM 93.00% on vibrations.
- FTC is divided into passive and active approaches; active FTC uses fault detection and diagnosis with reconfiguration or compensation, speed-sensor FTC relies on sensorless estimators, current-sensor FTC uses observers, and inverter FTC often uses hardware redundancy; ITSC-FTC strategies remain relatively rare and mostly target torque-ripple or copper-loss reduction, with few limiting short-circuit current.
Methods
- Design: state-of-the-art review/survey; it compares itself with existing PMSM diagnostic surveys in Table I and organizes the literature by fault location and diagnostic method.
- Data or sample: no primary experimental sample; it analyzes published methods and presents tabular summaries (Tables II–X) for ITSC, demagnetization, bearing, eccentricity, unbalance, misalignment, converter, sensor faults, AI methods, and FTC.
- Main analysis: categorizes methods into frequency-domain, time-frequency, time-domain/statistical, model-based, control-structure-signal, and AI-based approaches, discussing advantages, disadvantages, and future trends.
Limitations
- Paper-stated: future challenges include diagnostics during transients, hardware implementation, failure prediction/prognostics, data storage and cloud transfer, multiple-fault diagnosis, AI/deep-learning development for PMSM drives, transfer learning, and real-time fault detection.
- Paper-stated: many PMSM fault diagnosis methods lack hardware implementation; deep neural networks are limited by structural complexity; few papers address ITSC-FTC and fault-current mitigation; control-structure-based mechanical fault diagnosis needs further work.
- Evident from the text: as a review, it reports no new experimental validation; some cited methods are simulation-only or inconclusive (e.g., DWT+NN bearing diagnosis in DTC is described as simulation-only and rather inconclusive), and the AI accuracy table is literature-derived rather than a controlled benchmark.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures

















Verification
Claims the paper makes
19 Valid · 20 Not valid · 149 Not checked · 149 Own results and interpretations
At least one cited source doesn’t support this claim or points to a different paper, and none confirmed it — see the verdicts below.
In the paper
“Greater sensitivity of this component to the stator winding fault compared to the FFT of the stator phase current is also emphasized.”
§ Fault diagnosis and fault-tolerant control of PMSM drivesstate of the art and future challenges > A. FREQUENCY DOMAIN METHODS
What the sources say
- Disputedcites [43] matched to “Comparison of Selected Methods for the Stator Winding Condition Monitoring of a PMSM Using the Stator Phase Currents” (2021) sourceExperimental — accuracy not yet measured
Section 5 (page not provided) compares the fault indicators and identifies the 3fs component in the FFT spectrum of the stator phase current—not the 2fs component—as the most sensitive across the tested load-torque range. The Conclusions likewise describe both indicators as sensitive, without saying that 2fs is more sensitive. (LLM, conf=0.88)
Checked by a reasoning model — may be wrong.
- Not matchedcites [45]- [47]
A range of references, not one source.
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Disputed
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“According to [20], the greatest and most obvious increase in the case of this fault is the increase in the amplitude of the 3fs component, which has also been confirmed by the results presented by the authors in [42] and [43].”
§ Fault diagnosis and fault-tolerant control of PMSM drivesstate of the art and future challenges > A. FREQUENCY DOMAIN METHODS
What the sources say
- Partly supportedcites [20] matched to “Faults and Diagnosis Methods of Permanent Magnet Synchronous Motors: A Review” (2019) sourceExperimental — accuracy not yet measured
Section 3.2.1 (Frequency Domain Methods) says that for an inter-turn short circuit, the most obvious feature is an increase in the third-harmonic amplitude, corresponding to 3fs. It does not establish that this is the greatest increase in magnitude among the components. (LLM, conf=0.83)
- Partly supportedcites [42] matched to “Analysis of the Impact of Stator Inter-Turn Short Circuits on PMSM Drive with Scalar and Vector Control” (2020) sourceExperimental — accuracy not yet measured
Section 6 (Conclusions; page not available in our copy) reports that inter-turn short circuits increase the stator current’s 3fs harmonic and that its amplitude is much greater under field-oriented control than under scalar control. It does not establish that this is the greatest increase among fault-related components; the claim also omits the control-structure qualification. (LLM, conf=0.83)
- Supportedcites [43] matched to “Comparison of Selected Methods for the Stator Winding Condition Monitoring of a PMSM Using the Stator Phase Currents” (2021) source
Section 6 (Conclusions; page not provided) calls the increase in the 3fs component’s amplitude the most significant symptom of stator-winding damage. Section 4.1 also reports a large increase in that component after an interturn short circuit. (LLM, conf=0.94)
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“In all of these papers, the Authors conclude that the increase of the 2fs component amplitude in the stator phase current space vector module spectrum is a symptom of a stator winding fault.”
§ Fault diagnosis and fault-tolerant control of PMSM drivesstate of the art and future challenges > A. FREQUENCY DOMAIN METHODS
What the sources say
- Supportedcites [43] matched to “Comparison of Selected Methods for the Stator Winding Condition Monitoring of a PMSM Using the Stator Phase Currents” (2021) source
Section 2.2 states that, following an inter-turn short-circuit, the 2fs component increases in the FFT spectrum of the stator phase current space vector magnitude. This directly supports the attributed symptom of a stator winding fault. (LLM, conf=0.93)
- Not matchedcites [45]- [47]
A range of references, not one source.
boostedstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
Every source the paper cites for this claim was checked and supports it.
In the paper
“The limitation of this approach is mentioned in [60] to measure the ZSVC, the access to the neutral point of the stator winding is needed.”
§ Fault diagnosis and fault-tolerant control of PMSM drivesstate of the art and future challenges > A. FREQUENCY DOMAIN METHODS
What the sources say
- Supportedcites [60] matched to “Improved ZSVC‐based fault detection technique for incipient stage inter‐turn fault in PMSM” (2019) source
The Conclusion explicitly states that an accessible neutral point of the stator windings is needed to measure the ZSVC. It also notes that this condition is met in a fault-tolerant PMSM drive system. (LLM, conf=0.95)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
The sources with a verdict support this claim; the rest weren’t checked yet, have no full text we could read, or their verdicts aren’t rated yet.
In the paper
“The basic diagnostic signals in eccentricity diagnosis are: stator current [135], [143]- [146], [150], [151], [156]- [159], [161], [162], mechanical vibrations [149], [155], [156], noise [155], an airgap search coil voltage [149], [152], [156], [160], stator voltage [159], speed [159], load torque [159], d-axis stator inductance Ld [147], [148], BEMF [160] and unbalanced magnetic pull [153], [154]”
§ Fault diagnosis and fault-tolerant control of PMSM drivesstate of the art and future challenges > B. ECCENTRICITY FAULTS
What the sources say
- Not checked — no full text of the sourcecites [135] matched to “Fault detection of eccentricity and bearing damage in a PMSM by means of wavelet transforms decomposition of the stator current” (2008) source
- Not matchedcites [143]-[146]
A range of references, not one source.
- Supportedcites [150] matched to “Static Eccentricity Fault Recognition in Three‐Phase Line Start Permanent Magnet Synchronous Motor Using Finite Element Method” (2014) source
This source is cited within the stator-current group of references, not for the entire list of signals. The Introduction identifies stator current as a prevalent monitored signal for motor fault detection, and Section 5 analyzes it for static eccentricity diagnosis in LSPMSMs. Page numbers are not available in our copy. (LLM, conf=0.93)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
150 more claims · 5 with their cited sources checked
Create a free account to see all 337 claims and to verify the 1 reference still open.
- It may state two separate claims as one. 113
- Probably not a substantial claim. 91
- The quote only partly states this claim. 3
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Fault diagnosis and fault-tolerant control of PMSM drivesstate of the art and future challenges > C. DEEP NEURAL NETWORKS APPLICATION IN PMSM DRIVES
“The possibility of direct extraction of the input signal features in the diagnostics of PMSM stator windings faults has been described in [220], [222], [223], [229], [237].”
§ Fault diagnosis and fault-tolerant control of PMSM drivesstate of the art and future challenges > B. SHALLOW NEURAL NETWORKS APPLICATION IN PMSM DRIVES
“[237] + + CNN FFT IsABC”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Fault diagnosis and fault-tolerant control of PMSM drivesstate of the art and future challenges > TABLE I COMPARISON OF THIS PAPER WITH EXISTING SURVEYS AND REVIEW PAPERS ON DIAGNOSTICS OF PMSM DRIVES
“[15] 2015 125 (120) 1997-2016”
§ Fault diagnosis and fault-tolerant control of PMSM drivesstate of the art and future challenges > References
“15. M. Cheng, J. Hang, and J.Zhang, "Overview of fault diagnosis theory and method for permanent magnet machine," Chinese Journal of Electrical Eng., vol. 1 no. 1, pp. 21-36, 2015..”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Fault diagnosis and fault-tolerant control of PMSM drivesstate of the art and future challenges > IX. FAULT DETECTION OF PMSM DRIVE COMPONENTS AND FAULT-TOLERANT CONTROL A. FREQUENCY CONVERTER FAULTS
“The voltage-based method was also applied in [274] for open switch fault diagnosis in a voltage-oriented controlled AC/DC line side converter.”
§ Fault diagnosis and fault-tolerant control of PMSM drivesstate of the art and future challenges > References
“274. M. Bourogaoui, H. B. A. Sethom, and I. S. Belkhodja. "Speed/position sensor fault tolerant control in adjustable speed drives -a review." ISA Transactions, vol. 64, pp. 269-284, 2016.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Fault diagnosis and fault-tolerant control of PMSM drivesstate of the art and future challenges > B. SHALLOW NEURAL NETWORKS APPLICATION IN PMSM DRIVES
“[216] + MLP DIRECT IsABC”
§ Fault diagnosis and fault-tolerant control of PMSM drivesstate of the art and future challenges > C. DEEP NEURAL NETWORKS APPLICATION IN PMSM DRIVES
“[216] + + MLP 98,50% (FFT) IsABC + Te + + MLP 96,10% (STAT) IsABC + Te”
Citations
Cites
Condition Monitoring and Fault Diagnosis of Electrical Motors—A Review
Nandi, S., Toliyat, H. A., & Li, X. (2005) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2005.847955 · Cited by 2,382
A review of induction motors signature analysis as a medium for faults detection
El Hachemi Benbouzid, M. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873206 · Cited by 1,602
Condition Monitoring for Device Reliability in Power Electronic Converters: A Review
Yang, S., Xiang, D., Bryant, A., Mawby, P., Ran, L., & Tavner, P. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2049377 · Cited by 1,278 · cited 1×
“According to [238], [239], power semiconductor device damages account for approximately 35% of all ASD faults.”
BackgroundAdvances in Diagnostic Techniques for Induction Machines
Bellini, A., Filippetti, F., Tassoni, C., & Capolino, G.-A. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2007527 · Cited by 1,140 · cited 1×
“Additionally, the FFT can even mask components that appear at a given moment of time but are of very short duration [10], [32].”
BackgroundA Literature Review of IGBT Fault Diagnostic and Protection Methods for Power Inverters
Lu, B., & Sharma, S. K. (2009) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2009.2027535 · Cited by 985
A High-Speed Sliding-Mode Observer for the Sensorless Speed Control of a PMSM
Kim, H., Son, J., & Lee, J. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2098357 · Cited by 733 · cited 3×
“In [283] the SMO was developed with sign-type switching function replaced by a sigmoid function with some boundary”
BackgroundMethodWelchko, B. A., Lipo, T. A., Jahns, T. M., & Schulz, S. E. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2004.830074 · Cited by 724 · cited 2×
“A detailed overview of fault-tolerant inverter topologies is presented in [307], [308].”
BackgroundNew Sliding-Mode Observer for Position Sensorless Control of Permanent-Magnet Synchronous Motor
Qiao, Z., Shi, T., Wang, Y., Yan, Y., Xia, C., & He, X. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2206359 · Cited by 602 · cited 2×
“These could be: extended observer [279], SMO [280], [283], [284] or super-twisting sliding mode observer (ST-SMO) [285], MRAS estimator [281], KF [282]”
BackgroundMethodTrends in Fault Diagnosis for Electrical Machines: A Review of Diagnostic Techniques
Henao, H., Capolino, G.-A., Fernandez-Cabanas, M., Filippetti, F., Bruzzese, C., Strangas, E., Pusca, R., Estima, J., Riera-Guasp, M., & Hedayati-Kia, S. (2014) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2013.2287651 · Cited by 602 · cited 3×
“The popularity of this method is related to its simplicity, low cost and online machine state monitoring capabilities [11].”
MethodReport of Large Motor Reliability Survey of Industrial and Commercial Installations, Part I
(1985) · IEEE Transactions on Industry Applications · doi:10.1109/tia.1985.349532 · Cited by 602
Research works printed but not linked: 7
- Krichen, Fault detection and diagnosis methods in permanent magnet synchronous machines: A review, 229
- Varal, 2017, Bearing fault analysis of permanent magnet synchronous motor (PMSM) using current signature analysis, Int. Res. J. Eng. Technol., 4, 410
- Abbas, 2014, Bearings fault diagnosis in direct torque control permanent magnet synchronous motor based on discrete wavelet transform and artificial neural network, Int. J. Adv. Eng. Technol., 7, 341
- 10.1049/iet-epa.2012.0316 · DOI · Paper page
- 10.1109/TIE.2017.2688973 · DOI · Paper page
- 10.1109/TEC.2017.2726142 · DOI · Paper page
- 10.1109/TEC.2019.2936225 · DOI · Paper page
Cited by
Items 201–294 of 294
Small Signal Analysis and Control of High Speed PMSM Drive Consisting of LCL Filter
Panda, A. K., & Tripathi, A. (2023) · IEEE International Transportation Electrification Conference (ITEC-India) · doi:10.1109/itec-india59098.2023.10471384
Bahiddine, M., & Belhamra, A. (2024) · IAES International Journal of Artificial Intelligence · doi:10.11591/ijai.v13.i2.pp2111-2121
Fault ride-through in a dual-lane fault tolerant PMSM drive
McDonald, S. P., Winterborne, D., Mecrow, B. C., et al. (2024) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce55643.2024.10861078
Yu, Y. (2024) · International Conference on Mobile Networks and Wireless Communications (ICMNWC) · doi:10.1109/icmnwc63764.2024.10872190
Analysis and Diagnosis of Power Converter Faults in Switched Reluctance Motor Drives
Mahato, P. K., Alam, M., & Payami, S. (2024) · Proceedings of the Annual Conference of the IEEE Industrial Electronics Society · doi:10.1109/iecon55916.2024.10905492
Ghanayem, H., Alathamneh, M., & Nelms, R. M. (2024) · Proceedings of the Annual Conference of the IEEE Industrial Electronics Society · doi:10.1109/iecon55916.2024.10905690
Kozovský, M., Buchta, L., & Bláha, P. (2024) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon55916.2024.10905074
Duvvuri, S. S., Bhavana, V., Bhavani, P., et al. (2024) · doi:10.1109/icspe62629.2024.10924324
Lim, G. C., Jeong, W. H., Lee, K., et al. (2025) · IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec48143.2025.10977437
Jiang, K., Huang, J., & Min, F. (2025) · Lecture notes in electrical engineering · doi:10.1007/978-981-96-3317-3_15
Gritli, Y., Rossi, C., Tani, A., & Casadei, D. (2025) · Energies · doi:10.3390/en18112856 · Cited by 1
Position Sensor Offset Fault Diagnosis in Speed-Regulated PMSM Drives
Gamage, U. A. M., & Kuruppu, S. S. (2025) · IEEE Access · doi:10.1109/access.2025.3578189 · Cited by 1
Ahmed, N. E. G., Allam, S. M., & Almozayen, M. A. (2025) · Research Square · doi:10.21203/rs.3.rs-6639955/v1
Map-Based Behavior of a Dual Three Phase Machine under Inter-Turn Short Circuit Faults
Walch, D., Burkhardt, Y., & Hofmann, M. (2025) · IEEE International Electric Machines & Drives Conference (IEMDC) · doi:10.1109/iemdc60492.2025.11061069 · Cited by 1
Analytical Modeling and Analysis of Current Sensor Faults in PMSM Drives
Jawdeh, S. A., & Bazzi, A. M. (2025) · IEEE International Electric Machines & Drives Conference (IEMDC) · doi:10.1109/iemdc60492.2025.11061094
Liu, Y., & Zhu, J. (2025) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2025.3587772
Advanced Machine Learning and Data Mining Techniques for Fault Diagnosis in Industrial Applications
Vlachou, V. I., Karakatsanis, T. S., Efstathiou, D. E., Vlachou, E. I., Vologiannidis, S. D., & Gasteratos, A. C. (2025) · Lecture notes in computer science · doi:10.1007/978-3-031-98284-2_12
Analytical Study on Fault-Tolerant Control of Five-Phase Induction Motor Drive
Nayak, J. K., Sahoo, S. B., Behera, R. K., et al. (2025) · doi:10.1109/ecce-asia63110.2025.11111774
Sui, Y., Huang, J., Zhou, Z., Li, Z., Na, K., & Zheng, P. (2025) · IEEE International Electrical and Energy Conference (CIEEC) · doi:10.1109/cieec64805.2025.11116354
Energy-Efficient Predefined-Time Convergent Control Laws for PMSM Stabilization
Garza‐Alonso, A., Mi, X., & Basin, M. (2025) · IEEE International Symposium on Industrial Electronics (ISIE) · doi:10.1109/isie62713.2025.11124691
Shukla, A., Shukla, K., & Nath, S. (2025) · Lecture notes in networks and systems · doi:10.1007/978-981-96-4226-7_42
Analysis of Inter-turn Short Circuit Fault in FSCW-PMM with Y-△ Connection Windings
Elhindi, M., Chen, Z., Ma, H., et al. (2025) · International Journal of Applied Electromagnetics and Mechanics · doi:10.1177/13835416251345606
Fault Signature Sensitivity based on Residues for Interturn Short Circuit Fault in PMSMS
Deponti, M., Boceda, A., Zhao, M., Perini, R., & Foglia, G. M. (2025) · IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/sdemped53223.2025.11154253
Vlachou, V. I., Karakatsanis, T. S., & Efstathiou, D. E. (2025) · IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/sdemped53223.2025.11154340 · Cited by 1
Femia, A., Cagliari, G. A., Sala, G., Rizzoli, G., Gritli, Y., Tani, A., & Zarri, L. (2025) · IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/sdemped53223.2025.11154140
Gkiolekas, N., Salinas, M., Sergakis, A., et al. (2025) · IEEE International Conference on Environment and Electrical Engineering and IEEE Industrial and Commercial Power Systems Europe (EEEIC / I&CPS Europe) · doi:10.1109/eeeic/icpseurope64998.2025.11169032
Hamidani, R., & Rezig, A. (2025) · International Journal of Computational and Experimental Science and Engineering · doi:10.22399/ijcesen.4190
Design and Real-Time Implementation of Robust Permanent Magnet Synchronous Motor Control System
Huynh, V. V., Tran, L. T. T., & Vu, P. (2025) · Technical Education Science/Giáo dục Kỹ thuật · doi:10.54644/jte.2025.1848
Design of an IPM Test Rotor for Use in Machine Tool Condition Monitoring Research
Crossley, M., Apsley, J. M., & Djurović, S. (2025) · doi:10.1109/ecce-europe62795.2025.11238940
Sensors and open-switch FDI of induction motor drives based on control reconfiguration
Venghi, L. E., Aguilera, F., de la Barrera, P. M., & Angelo, C. H. D. (2025) · Control Engineering Practice · doi:10.1016/j.conengprac.2025.106670 · Cited by 2
Thakur, H., Pindoriya, R. M., & Prakash, S. (2025) · IEEE International Conference on Sustainable Energy and Future Electric Transportation (SEFET) · doi:10.1109/sefet65155.2025.11255337
Detection of Synchronous Reluctance Motor Coupling Unbalance via Vibration and Current Analysis
Navarro-Navarro, Á., Ruiz-Sarrió, J. E., Biot-Monterde, V., et al. (2025) · doi:10.1109/ecce58356.2025.11260314
Song, J., & Lee, K. (2025) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce58356.2025.11259541
Development and Testing of a Fault-Tolerant Modular Motor Drive Using Current-Source Inverters
Zhang, X., Tian, P., Chen, K., Parra, A., Jahns, T. M., & Sarlioglu, B. (2025) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce58356.2025.11260409
Lee, J., Im, S.-Y., Park, D.-H., et al. (2025) · doi:10.1109/ecce58356.2025.11259916
FEATURE SELECTION ALGORITHM TO IMPROVE THE EFFICIENCY OF SPACE TECHNIC ELEMENTS DIAGNOSTICS
Игоревич, Н. М., Slobodzyan, N. S., & Zhukov, Y. A. (2025) · Bulletin of Belgorod State Technological University named after V G Shukhov · doi:10.34031/2071-7318-2025-10-12-110-123
Tacholess order analysis method for motor bearing fault diagnosis under variable-speed conditions
Huang, X. S., Zhang, J., Li, G., et al. (2025) · Journal of Power Electronics · doi:10.1007/s43236-025-01248-2
Neural Network Model for Adaptive Control of Permanent Magnet Synchronous Motor
Chepiga, A., Chebotarev, A. A., Malysheva, V. V., Kandalov, V. A., & Shapovalov, V. V. (2025) · Lecture notes in networks and systems · doi:10.1007/978-3-032-13615-2_16 · Cited by 1
AI-Driven Stator Fault Detection Using Time-Domain Features of Current Signal
Geetha, G., & Geethanjali, P. (2025) · Innovations in Power and Advanced Computing Technologies (i-PACT) · doi:10.1109/i-pact65952.2025.11307997
Kuhn, L., Meindl, M., Bentheimer, C., et al. (2026) · Aerospace Science and Technology · doi:10.1016/j.ast.2026.111681
Luo, C., Wang, W., & Xu, S. (2025) · International Conference on Electrical Machines and Systems (ICEMS) · doi:10.23919/icems66262.2025.11317716
Design of a Fault-tolerant System for a Position Sensor of PMSM Based on SMO and ADRC in EVs
Kun, H., Yea, N. J., Janasekaran, S., & Bin, Z. (2025) · IEEE International Conference on Computing, Engineering and Design (ICCED) · doi:10.1109/icced68324.2025.11324977
Feng, G., Lu, Y., Tong, Z., Lai, C., & Ding, B. (2026) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2025.3647803 · Cited by 2
Multiquantity Analysis Under Transient Regimes for Condition Monitoring of Electric Motors
Daviu, J. A. A., Ruiz-Sarrió, J. E., Quijano-López, A., et al. (2026) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2026.3655653
Liu, J., Zhang, Y., Zhu, Y., Zhao, L., Tian, Y., & Zhang, Z. (2025) · International Conference on Advanced Electrical and Energy Systems (AEES) · doi:10.1109/aees66649.2025.11332472 · Cited by 1
Birasa, R., Idris, D. K. M., & Martis, C. S. (2025) · International Conference on Future Energy Solutions (FES) · doi:10.1109/fes65767.2025.11341827
A novel self-sensing-based framework for misalignment detection of shafting
Chen, D., Zhao, M., Yang, J., Sun, S., Li, S., & Zhang, Y. (2026) · Measurement Science and Technology · doi:10.1088/1361-6501/ae44bf
Abebe, M. S., & Ge, X. (2025) · IEEE International Power Electronics and Application Symposium (PEAS) · doi:10.1109/peas66638.2025.11403700
IoT Based Low-Cost Smart EV Motor Fault Detection Using ESP32
Mr. Ameya Nitin Chavan, P. C. J. (2026) · International Journal of Advanced Research in Science Communication and Technology · doi:10.48175/ijarsct-31447
LMI-based Robust Design of Back-EMF Observer with PLL in the Loop
Massenio, P. R., Ruderman, M., Brescia, E., et al. (2026) · IEEE International Conference on Advanced Motion Control (AMC) · doi:10.1109/amc67705.2026.11435821
Yuan, Y., Pi, C., & Jiang, B. (2025) · International Conference on Clean Energy Storage and Power Engineering (CESPE) · doi:10.1109/cespe68033.2025.00108
Zhang, J., Sun, H., Han, T., & Shi, X. (2026) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2026.3675101 · Cited by 2
Online Fault Severity Estimation of Interturn Short-Circuits in PMSMs Based on EKF
Huang, S., Wang, Y., Li, B., et al. (2026) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2026.3680226
Zhang, T., Li, N., Jiang, J., Li, X., Yang, B., & Lei, Y. (2026) · Lecture notes in electrical engineering · doi:10.1007/978-981-95-7322-6_39
Sharma, A., Ramawat, K., Rajpurohit, B. S., Usman, A., & Chaudhary, P. J. (2025) · IEEE International Conference on Smart Technologies for Power, Energy and Control (STPEC) · doi:10.1109/stpec66316.2025.11490821
Operational Hypervisor: Anomaly Detection and Handling for Automated Electric Vehicles
Vučinić, V., Kraus, D., Aleksendrić, D., & Sax, E. (2026) · IEEE International Systems Conference (SysCon) · doi:10.1109/syscon66367.2026.11503525
Wybrane metody wykrywania niewyważenia w układzie napędowym z połączeniem sprężystym
Ewert, P., Wicher, B., & Pajchrowski, T. (2026) · PRZEGLĄD ELEKTROTECHNICZNY · doi:10.15199/48.2026.05.21
Self-citationKrzysztofiak, M., & Skowron, M. (2026) · PRZEGLĄD ELEKTROTECHNICZNY · doi:10.15199/48.2026.05.20
Self-citationAI-Powered FaultDiagnosis for PMSM-basedElectric Vehicles using BWKO-NeuroRBF-SCNetArchitecture
Kamalakannan, C., Padmavathi, R., Elavarasi, R., et al. (2026) · Iranian Journal of Science and Technology Transactions of Electrical Engineering · doi:10.1007/s40998-026-01117-z
Lee, S. K., Kim, H., Chae, M., et al. (2026) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2026.115273
Thakur, H., Pindoriya, R. M., & Prakash, S. (2026) · IETE Journal of Research · doi:10.1080/03772063.2026.2683552
Stare, Ž., Lavrič, H., Nemec, M., et al. (2026) · Applied Sciences · doi:10.3390/app16125994
Gritli, Y., Tani, A., & Rossi, C. (2026) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2026.3704103
Detection of Rotor Unbalance in Multi-Mass Systems Using FFT and Bispectrum
Ewert, P., Wicher, B., & Pajchrowski, T. (2026) · Power Electronics and Drives · doi:10.2478/pead-2026-0019
Self-citationComposite fault-tolerant predictive control strategy for PMSM demagnetization faults
Zhang, Q., Xiao, W., Mei, L., et al. (2026) · ISA Transactions · doi:10.1016/j.isatra.2026.06.053
Diagnostics for Automated Electric Vehicles: Batteries Short-Term Faults Predictions
Vučinić, V., Kraus, D., & Sax, E. (2025) · IEEE International Conference on Cybernetics, Cognition and Machine Learning Applications (ICCCMLA) · doi:10.1109/icccmla66092.2025.11581256
Impact of Traction Motors Bearings Degradation in Common Mode Current
Noia, L. P. D., Fedele, E., Meo, S., & Rizzo, R. (2026) · Global Power, Energy and Communication Conference · doi:10.1109/gpecom70462.2026.11578417
Structural Analysis for Optimal Sensor Placement in Battery Electric Drive for EVs
Maaradji, T. M. A., Cheng, Y., D’Arpino, M., Rizzoni, G., & Attaianese, C. (2026) · IEEE Transportation Electrification Conference and Expo · doi:10.1109/iteceats66641.2026.11592982
Electrical Fault Tolerance of a Multi-stage Axial-Flux PM Drivetrain for Electrified Propulsion
Deponti, M., Lewis, D. D., Lopez-Guerrero, D. A., et al. (2026) · doi:10.1109/iteceats66641.2026.11593010
Lu, D., Li, S., Zhang, J., et al. (2026) · International Power Electronics Conference (IPEC) · doi:10.23919/ipec-nagasaki2026-ec64663.2026.11596912
Ramesh, J. N., Alex, V. C., Kumar, S., et al. (2026) · Engineering Research Express · doi:10.1088/2631-8695/ae8e3a
Koutrakos, K., Mitronikas, E. D., & Michenthaler, C. (2026) · IEEE Open Journal of Industry Applications · doi:10.1109/ojia.2026.3718047
Liu, Y., Xie, F., Li, X., et al. (2026) · Proceedings of the Institution of Mechanical Engineers Part I Journal of Systems and Control Engineering · doi:10.1177/09596518261471570
Advanced Artificial Intelligence for Fault Detection of Electric Motors
Guidotti, G., Zettin, P., Ballo, F. M., & Gobbi, M. (2026) · Electronics · doi:10.3390/electronics15153424
Liu, F., Li, W., Li, H., et al. (2026) · Machines · doi:10.3390/machines14080903
Kumar, M. P., Velpula, S., & Saiprakash, C. (2026) · Transactions of the Institute of Measurement and Control · doi:10.1177/01423312261472646
Investigation of Demagnetization Fault Impact on PMSM Performance for Industrial Applications
Vlachou, V. I., Karakatsanis, T. S., Vologiannidis, S. D., & Efstathiou, D. E. (2026) · International Conference on Electrical, Computer and Energy Technologies (ICECET) · doi:10.1109/icecet65726.2026.11632564
Mazzone, A., Rito, G. D., Bonini, V., Rovera, E., & Suti, A. (2026) · IEEE International Workshop on Metrology for AeroSpace (MetroAeroSpace) · doi:10.1109/metroaerospace69299.2026.11646815 · Cited by 1
Guan, M., Peng, Y., & Xie, Y. (2026) · Sensors · doi:10.3390/s26175537
Adaptive Fault‐Tolerant Prescribed Performance Control for Underactuated Unmanned Surface Vehicles
Tiep, D. K., & Pham, D. (2026) · International Journal of Robust and Nonlinear Control · doi:10.1002/rnc.70734
Aremu, M. B., Ajasa, A., & Nasir, A. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.7411435
Deep Neural Network-Based Adaptive Backstepping Control of Permanent Magnet Synchronous Motors
Bayir, F., Zergeroğlu, E., & Tatlıcıoğlu, E. (2026) · International Journal of Control Automation and Systems · doi:10.1007/s12555-026-00191-7
Modeling and Analysis of Different Types of Fault Mechanisms in PMSM
Zheng, Y., Tian, M., Yi, B., et al. (2026) · doi:10.1109/secp69833.2026.11679397
An ANN-based Open-Circuit Switch Fault Detection Method for Open-End Winding AC Motor Drives
Siva Prasada Rao, D., & Somasekhar, V. T. (2026) · IEEE International Conference on Sustainable Energy and Future Electric Transportation (SEFET) · doi:10.1109/sefet69291.2026.11686933
JOBANI, A. E. (2026) · Discover Electronics · doi:10.1007/s44291-026-00287-8
Design and Control of Drives and Electrical Machines
Li, C., & Li, Z. (2026) · Electronics · doi:10.3390/electronics15184333
KONDRUSIK, A., Choroszucho, A., Szczegielniak, T., et al. (2026) · Energies · doi:10.3390/en19194542
Fault-Tolerant Control Strategy for Robot-Joint PMSM Drives Under Encoder FaultsPreprint
Hu¹, C., Shen, X., Lu, X., Ye¹, G., & Sheng, L. (2026) · Research Square · doi:10.21203/rs.3.rs-10687599/v1
Kim, H.-J., & Baek, S.-W. (2026) · Journal of Electronic Packaging · doi:10.1115/1.4072719
Wang, P. (2026) · International Conference on Mechanical, Electronics and Electrical and Automation Control (METMS) · doi:10.1109/metms70800.2026.11706663
Metadata
- Authors
- Orlowska-Kowalska, T., Wolkiewicz, M., Pietrzak, P., Skowron, M., Ewert, P., Tarchala, G., Krzysztofiak, M., & Kowalski, C. T.
- Affiliations
- Department of Electrical Machines, Drives and Measurements, Wrocław University of Science and Technology, Wrocław, Poland
- Wrocław University of Science and Technology (PL)
- ORCID
- Venue
- IEEE Access
- Published
- 2022
- Volume
- 10
- Pages
- 59979-60024
- ISSN
- 2169-3536 (ISSN-L)
- OpenAlex
- W4285271556
- Semantic Scholar
- dc069ddc2dd7fed25b6db8df368599dab4ad9d8b
- Cited by
- 328
- References
- 335
- Citations by year
- 2026: 72 · 2025: 112 · 2024: 81 · 2023: 52 · 2022: 11
- FWCI
- 21.95
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- IEEE Access (publishedVersion, cc-by-nc-nd)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
- Funders
- National Science Centre Poland (2017/27/B/ST7/00816)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Sensorless Control of Electric Motors
- Physical Sciences › Engineering › Control and Systems Engineering › Fault Detection and Control Systems
- Keywords
- permanent magnet synchronous motor, fault diagnosis, fault-tolerant control, motor drives, stator winding faults, bearing defects, rotor faults, power converter faults, sensor faults, artificial neural networks, safety-critical systems
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-06, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-06 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.