Transitioning to Physics-of-Failure as a Reliability Driver in Power Electronics
Open accessThe DOI matches its Crossref record; 81 of the 82 references it cites were found in a registry or an index.
Abstract
Power electronics has progressively gained an important status in power generation, distribution, and consumption. With more than 70% of electricity processed through power electronics, recent research endeavors to improve the reliability of power electronic systems to comply with more stringent constraints on cost, safety, and availability in various applications. This paper serves to give an overview of the major aspects of reliability in power electronics and to address the future trends in this multidisciplinary research direction. The ongoing paradigm shift in reliability research is presented first. Then, the three major aspects of power electronics reliability are discussed, respectively, which cover physics-of-failure analysis of critical power electronic components, state-of-the-art design for reliability process and robustness validation, and intelligent control and condition monitoring to achieve improved reliability under operation. Finally, the challenges and opportunities for achieving more reliable power electronic systems in the future are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“As a result, many mission-profile-based reliability assessment procedures, which incorporate the DfR method and PoF understandings of power electronics, have been proposed and successfully applied for various applications (e.g., wind power converters [84], grid-connected PV inverters [85], variable frequency drives [86], or more electric aircraft [87]).”
From Reliability of Power Electronic Systems for EV/HEV Applications (2021) · cites this paper as [84]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Statistical Distribution Function of Wide Applicability
Weibull, W. (1951) · Journal of Applied Mechanics · doi:10.1115/1.4010337 · Cited by 11,604
A Review of Single-Phase Grid-Connected Inverters for Photovoltaic Modules
Kjaer, S. B., Pedersen, J. K., & Blaabjerg, F. (2005) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2005.853371 · Cited by 3,621 · cited 1×
“With the increasing penetration of renewable energy sources and the increasing adoption of more efficient variable-speed motor drives [6]-[8], the failure of power electronic converters in Wind Turbines (WTs), Photovoltaic (PV) systems and motor drives are becoming an issue.”
BackgroundSelf-citationPower electronics as efficient interface in dispersed power generation systems
Blaabjerg, F., Chen, Z., & Kjaer, S. B. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2004.833453 · Cited by 2,588 · cited 1×
“With the increasing penetration of renewable energy sources and the increasing adoption of more efficient variable-speed motor drives [6]–[8], the failure of power electronic converters”
BackgroundSelf-citationA Study of the Effects of Cyclic Thermal Stresses on a Ductile Metal
Coffin, L. F. (1954) · Journal of Fluids Engineering · doi:10.1115/1.4015020 · Cited by 2,226 · cited 1×
“If T0 is negligible compared with T , it can be dropped out from the above equation, which then becomes the Coffin–Manson model discussed in [56]–[58].”
BackgroundMultiphase Electric Machines for Variable-Speed Applications
Levi, E. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.918488 · Cited by 2,157 · cited 1×
“nificant shift in the power converter design: multiphase power converters and machines [87], [88] and use of parallel or series connection of power converters [89], [90].”
BackgroundAn Industry-Based Survey of Reliability in Power Electronic Converters
Yang, S., Bryant, A., Mawby, P., Xiang, D., Ran, L., & Tavner, P. (2011) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2011.2124436 · Cited by 2,019
Condition Monitoring for Device Reliability in Power Electronic Converters: A Review
Yang, S., Xiang, D., Bryant, A., Mawby, P., Ran, L., & Tavner, P. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2049377 · Cited by 1,278
Behavior of materials under conditions of thermal stress
Manson, S. S. (1953) · NASA STI Repository (National Aeronautics and Space Administration) · Cited by 1,235
Selected failure mechanisms of modern power modules
Ciappa, M. (2002) · Microelectronics Reliability · doi:10.1016/s0026-2714(02)00042-2 · Cited by 1,039 · cited 1×
“Especially, much interesting work from the semiconductor side investigates the failure mechanisms of insulated-gate bipolar transistor (IGBT) modules [51] and physical-based lifetime models [52].”
BackgroundA Literature Review of IGBT Fault Diagnostic and Protection Methods for Power Inverters
Lu, B., & Sharma, S. K. (2009) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2009.2027535 · Cited by 985
Power Electronics Converters for Wind Turbine Systems
Blaabjerg, F., Liserre, M., & Ma, K. (2012) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2011.2181290 · Cited by 918
Self-citationSurvey on Reliability of Power Electronic Systems
Song, Y., & Wang, B. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2192503 · Cited by 861 · cited 1×
“Several literature reviews on field experiences [23], strategies to improve reliability of power electronic systems [24], and DFR for power electronic systems [9] have been presented in the last two years.”
BackgroundPrognostics and Health Management of Electronics
Pecht, M. G. (2008) · Wiley eBooks · doi:10.1002/9780470385845 · Cited by 847
Practical Reliability Engineering
O'Connor, P. D. T., & Kleyner, A. (2011) · Wiley eBooks · doi:10.1002/9781119961260 · Cited by 783
Welchko, B. A., Lipo, T. A., Jahns, T. M., & Schulz, S. E. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2004.830074 · Cited by 724 · cited 2×
“Switch redundant topology for fault tolerant control [83].”
BackgroundReliability Issues in Photovoltaic Power Processing Systems
Petrone, G., Spagnuolo, G., Teodorescu, R., Veerachary, M., & Vitelli, M. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.924016 · Cited by 579
Avenas, Y., Dupont, L., & Khatir, Z. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2178433 · Cited by 559 · cited 1×
“Since the main failure cause for power module is the junction temperature swing, measuring it or estimating by means of Thermo-Sensitive Electrical Parameters (TSEPs) is one of the most interesting challenges [72].”
BackgroundControl of Distributed Generation Systems— Part II: Load Sharing Control
Marwali, M. N., Jung, J.-W., & Keyhani, A. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2004.836634 · Cited by 438 · cited 1×
“In case of parallel power converters that present some redundancies, it is also possible to share the load among the different units also in view of controlling the temperature swing [80].”
BackgroundPrognostics and health management of electronics
Vichare, N. M., & Pecht, M. G. (2006) · IEEE Transactions on Components and Packaging Technologies · doi:10.1109/tcapt.2006.870387 · Cited by 433
Monte-Carlo based uncertainty analysis: Sampling efficiency and sampling convergence
Janssen, H. (2013) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2012.08.003 · Cited by 385 · cited 1×
“In addition, Monte Carlo simulation is another important statistics tool to handle uncertainties to analyze the robustness margin, confidence level, and so on [69].”
MethodAssessing the Reliability and Degradation of Photovoltaic Module Performance Parameters
Meyer, E. L., & van Dyk, E. E. (2004) · IEEE Transactions on Reliability · doi:10.1109/tr.2004.824831 · Cited by 378
Active thermal control of power electronic modules
Murdock, D. A., Torres, J. E. R., Connors, J. J., & Lorenz, R. D. (2006) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2005.863905 · Cited by 332
Design for reliability of power electronic systems
Wang, H., Ma, K., & Blaabjerg, F. (2012) · IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society · doi:10.1109/iecon.2012.6388833 · Cited by 313 · cited 10×
“A systematic DFR procedure specifically applicable to the design of power electronic products is presented in [9] and shown in Fig.”
BackgroundMethodInfluentialSelf-citationBusca, C., Teodorescu, R., Blaabjerg, F., Munk-Nielsen, S., Helle, L., Abeyasekera, T., & Rodriguez, P. (2011) · Microelectronics Reliability · doi:10.1016/j.microrel.2011.06.053 · Cited by 293 · cited 1×
“If T0 is negligible compared with T , it can be dropped out from the above equation, which then becomes the Coffin–Manson model discussed in [56]–[58].”
BackgroundSelf-citationLong-Lifetime Power Inverter for Photovoltaic AC Modules
Rodriguez, C., & Amaratunga, G. A. J. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.922401 · Cited by 258
Development of a Methodology for Improving Photovoltaic Inverter Reliability
Ristow, A., Begovic, M., Pregelj, A., & Rohatgi, A. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.924017 · Cited by 250
Five years of operating experience at a large, utility‐scale photovoltaic generating plant
Moore, L. M., & Post, H. N. (2008) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.800 · Cited by 246
Catastrophic failure and fault-tolerant design of IGBT power electronic converters - an overview
Wu, R., Blaabjerg, F., Wang, H., Liserre, M., & Iannuzzo, F. (2013) · IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society · doi:10.1109/iecon.2013.6699187 · Cited by 226
Self-citationReliability Physics and Engineering: Time-To-Failure Modeling
McPherson, J. W. (2010) · Springer eBooks · doi:10.1007/978-1-4419-6348-2 · Cited by 220 · cited 2×
“A typical stress-strain (σ-ε) curve for a material [55].”
BackgroundFischer, K., Besnard, F., & Bertling, L. (2012) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2011.2176129 · Cited by 217 · cited 1×
“also saw much pioneering work on the reliability of power converters for WTs [30]–[32] and inverters for PV systems [33]–[50].”
BackgroundDesign Optimization of Transformerless Grid-Connected PV Inverters Including Reliability
Koutroulis, E., & Blaabjerg, F. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2198670 · Cited by 214
Self-citationReliability Calculation of Multilevel Converters: Theory and Applications
Richardeau, F., & Pham, T. T. L. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2211315 · Cited by 212 · cited 2×
“Redundancies by connecting IGBTs in parallel or in series [84].”
BackgroundMethodReliability Prediction for Inverters in Hybrid Electrical Vehicles
Hirschmann, D., Tissen, D., Schroder, S., & De Doncker, R. W. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.909236 · Cited by 209
Recurrent Events Data Analysis for Product Repairs, Disease Recurrences, and Other Applications
Nelson, W. B. (2003) · Society for Industrial and Applied Mathematics eBooks · doi:10.1137/1.9780898718454 · Cited by 205
Harb, S., & Balog, R. S. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2222447 · Cited by 204
Reliability Evaluation of Grid-Connected Photovoltaic Power Systems
Zhang, P., Wang, Y., Xiao, W., & Li, W. (2012) · IEEE Transactions on Sustainable Energy · doi:10.1109/tste.2012.2186644 · Cited by 189
Yang, L., Agyakwa, P. A., & Johnson, C. M. (2013) · IEEE Transactions on Device and Materials Reliability · doi:10.1109/tdmr.2012.2235836 · Cited by 186 · cited 2×
“Especially, much interesting work from the semiconductor side investigates the failure mechanisms of insulated-gate bipolar transistor (IGBT) modules [51] and physical-based lifetime models [52].”
BackgroundReactive Power Influence on the Thermal Cycling of Multi-MW Wind Power Inverter
Ma, K., Liserre, M., & Blaabjerg, F. (2013) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2013.2240644 · Cited by 178
Self-citationDhople, S. V., Davoudi, A., Domínguez-García, A. D., & Chapman, P. L. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2103329 · Cited by 174
Development of an integrated data-acquisition system for renewable energy sources systems monitoring
Koutroulis, E., & Kalaitzakis, K. (2003) · Renewable Energy · doi:10.1016/s0960-1481(01)00197-5 · Cited by 169
Choudhary, V., Ledezma, E., Ayyanar, R., & Button, R. M. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.911845 · Cited by 162
Analysis of PWM Frequency Control to Improve the Lifetime of PWM Inverter
Wei, L., McGuire, J., & Lukaszewski, R. A. (2011) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2010.2103391 · Cited by 160 · cited 1×
“The easiest way is to change the switching frequency [78], [79] to control the junction temperature.”
BackgroundPredicting the reliability of electronic equipment
Pecht, M. G., & Nash, F. R. (1994) · Proceedings of the IEEE · doi:10.1109/5.293157 · Cited by 153 · cited 2×
“data and various handbooks released by military and industry [13].”
BackgroundThe history of reliability prediction
Denson, W. K. (1998) · IEEE Transactions on Reliability · doi:10.1109/24.740547 · Cited by 150 · cited 2×
“3) From Reliability Prediction to Robustness Validation: Conventional empirical methodologies mainly attempt to determine the feasibility in fulfilling certain reliability goals and to predict the warranty-costs and maintenance-support requirements [12].”
BackgroundReliability Estimation of Three Single-Phase Topologies in Grid-Connected PV Systems
Chan, F., & Calleja, H. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2060459 · Cited by 141
Physics-of-Failure: An Approach to Reliable Product Development
Pecht, M., & Dasgupta, A. (1995) · Journal of the IEST · doi:10.17764/jiet.2.38.5.y3561m03801h0082 · Cited by 140
Reliability, availability, and maintainability of high-power variable-speed drive systems
Wikström, P., Terens, L. A., & Kobi, H. (2000) · IEEE Transactions on Industry Applications · doi:10.1109/28.821821 · Cited by 131
Häll, P., & Strutt, J. E. (2003) · Reliability Engineering & System Safety · doi:10.1016/s0951-8320(03)00032-2 · Cited by 111 · cited 1×
“In [68], the probabilistic-based PoF models have been developed for plastic package corrosion.”
BackgroundPhysics-of-failure: an approach to reliable product development
Pecht, M., & Dasgupta, A. (2002) · IEEE 1995 International Integrated Reliability Workshop. Final Report · doi:10.1109/irws.1995.493566 · Cited by 104
Wikström, P., Terens, L., & Kobi, H. (2002) · IEEE Industry Applications Society Petroleum and Chemical Industry Conference (PCIC) · doi:10.1109/pcicon.1998.727936 · Cited by 96 · cited 1×
“Respective research in different applications is also discussed in various literatures, such as three-phase converters for aircrafts [25], power inverters for railway tractions [26], inverters for hybrid electric vehicles [27], high power variable-speed motor drives [28], and pulsed power converters for industrial pro…”
BackgroundIGBT module with user accessible on-chip current and temperature sensors
Motto, E. R., & Donlon, J. F. (2012) · 2012 Twenty-Seventh Annual IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2012.6165816 · Cited by 92 · cited 1×
“In view of controlling the junction temperature, estimating it by means of TSEP, as already mentioned, or using an observer based on FEM modeling of the device [76] are two interesting alternatives to the more expensive ones by using of integrated sensors in the chip [77].”
MethodReliability-Oriented Design of Three-Phase Power Converters for Aircraft Applications
Burgos, R., Chen, G., Wang, F., Boroyevich, D., Odendaal, W. G., & Van Wyk, J. D. (2012) · IEEE Transactions on Aerospace and Electronic Systems · doi:10.1109/taes.2012.6178060 · Cited by 87 · cited 1×
“Respective research in different applications is also discussed in various literatures, such as three-phase converters for aircrafts [25], power inverters for railway tractions [26], inverters for hybrid electric vehicles [27], high power variable-speed motor drives [28], and pulsed power converters for industrial pro…”
BackgroundOptimal Design of Modern Transformerless PV Inverter Topologies
Saridakis, S., Koutroulis, E., & Blaabjerg, F. (2013) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2013.2252013 · Cited by 86
Self-citationFast power switch failure detection for fault tolerant voltage source inverters using FPGA
Karimi, S., Poure, P., & Saadate, S. (2009) · IET Power Electronics · doi:10.1049/iet-pel.2008.0075 · Cited by 78 · cited 1×
“The use of fast digital computational devices [85] and the integration in the power module of the extra leg and of a thyristor that can survive high energy pulses [86] are the enabling technologies to isolate a faulty leg and online substitute it with a healthy one.”
BackgroundMicroelectronics Reliability: Physics-of-Failure Based Modeling and Lifetime Evaluation
White, M., & Bernstein, J. B. (2008) · doi:10.13140/rg.2.1.2490.1281 · Cited by 78
Enhancing MIL-HDBK-217 reliability predictions with physics of failure methods
McLeish, J. G. (2010) · Annual Reliability and Maintainability Symposium (RAMS) · doi:10.1109/rams.2010.5448044 · Cited by 77 · cited 1×
“In recent years, the initiatives to update the Military-Handbook-217F have turned to a hybrid approach, which is proposed for the planned version of Military-Handbook-217H [17].”
BackgroundDesign Strategy to Optimize the Reliability of Grid-Connected PV Systems
Chan, F., & Calleja, H. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.928100 · Cited by 74
Reliability and Safety in Railway
Perpiñà, X. (2012) · InTech eBooks · doi:10.5772/2660 · Cited by 74 · cited 1×
“To meet those requirements, paradigm shift is going on in the area of automotive electronics, more electrical aircrafts, and railway tractions by introducing new reliability design tools and robustness validation methods [2], [4], [5].”
Yang, Y., Wang, H., Blaabjerg, F., & Ma, K. (2013) · 2013 15th European Conference on Power Electronics and Applications (EPE) · doi:10.1109/epe.2013.6631986 · Cited by 71 · cited 1×
“More realistic thermal stress analysis of Si- and SiC-based devices under long-term mission profile are also studied in [49] and [50], respectively.”
BackgroundSelf-citationHow to estimate and use MTTF/MTBF would the real MTBF please stand up?
Krasich, M. (2009) · Proceedings, annual Reliability and Maintainability Symposium/Proceedings. Annual Reliability and Maintainability Symposium · doi:10.1109/rams.2009.4914702 · Cited by 67 · cited 1×
“(defined as 1/λ) are found to be inappropriate to most practical cases as discussed in [9], [13], and [20].”
BackgroundLifetime as a control variable in power electronic systems
Weckert, M., & Roth-Stielow, J. (2010) · 2010 Emobility - Electrical Power Train · doi:10.1109/emobility.2010.5668049 · Cited by 65 · cited 1×
“The easiest way is to change the switching frequency [78], [79] to control the junction temperature.”
BackgroundMa, K., Blaabjerg, F., & Liserre, M. (2013) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2013.2240643 · Cited by 65 · cited 1×
“The thermal analysis of power converters, especially in case of more complex structures like multilevel or multi-cell ones, reveals that some of the power semiconductor devices can be more stressed with respect to others and this difference can be even more evident in some particular conditions like those caused by sy…”
BackgroundSelf-citationLong-Term Reliability of Railway Power Inverters Cooled by Heat-Pipe-Based Systems
Perpiñà, X., Jordà, X., Vellvehi, M., Rebollo, J., & Mermet-Guyennet, M. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2087298 · Cited by 60 · cited 1×
“Respective research in different applications is also discussed in various literatures, such as three-phase converters for aircrafts [25], power inverters for railway tractions [26], inverters for hybrid electric vehicles [27], high power variable-speed motor drives [28], and pulsed power converters for industrial pro…”
BackgroundReal Field Mission Profile Oriented Design of a SiC-Based PV-Inverter Application
Sintamarean, N. C., Blaabjerg, F., Wang, H., & Yang, Y. (2014) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2014.2312545 · Cited by 48 · cited 2×
“also saw much pioneering work on the reliability of power converters for WTs [30]–[32] and inverters for PV systems [33]–[50].”
BackgroundSelf-citationBalog, R. S., Kuai, Y., & Uhrhan, G. (2009) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2009.5316107 · Cited by 46
Reliability of capacitors for DC-link applications — An overview
Wang, H., & Blaabjerg, F. (2013) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2013.6646935 · Cited by 46 · cited 1×
“More detailed discussions on them have been given in [61].”
BackgroundSelf-citationBojoi, R. I., NEACŞU, M. G., & Tenconi, A. (2012) · doi:10.1109/speedam.2012.6264566 · Cited by 41 · cited 2×
“nificant shift in the power converter design: multiphase power converters and machines [87], [88] and use of parallel or series connection of power converters [89], [90].”
BackgroundWang, H., Yang, Y., & Blaabjerg, F. (2013) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2013.6520714 · Cited by 39 · cited 1×
“A reliability-oriented design guideline proposed in [63] is applied for the selection of the input capacitor to fulfill 20 years of lifetime.”
MethodSelf-citationHigh-Efficiency High-Reliability Pulsed Power Converters for Industrial Processes
Carastro, F., Castellazzi, A., Clare, J., & Wheeler, P. W. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2155086 · Cited by 35 · cited 1×
“Respective research in different applications is also discussed in various literatures, such as three-phase converters for aircrafts [25], power inverters for railway tractions [26], inverters for hybrid electric vehicles [27], high power variable-speed motor drives [28], and pulsed power converters for industrial pro…”
BackgroundDesign for Reliability: Overview of the Process and Applicable Techniques
Mettas, A. (2010) · International Journal of Performability Engineering · Cited by 33
Boettcher, M., & Fuchs, F. W. (2011) · European Conference on Power Electronics and Applications · Cited by 24
Power Electronics---Emerging from Limbo
Newell, W. E. (1974) · IEEE Transactions on Industry Applications · doi:10.1109/tia.1974.349114 · Cited by 23 · cited 1×
“Newell in the 1970s [1] and (b) power electronic reliability research needs seen from today.”
BackgroundA Framework for Reliability and Performance Assessment of Wind Energy Conversion Systems
Smater, S. S., & Domínguez-García, A. D. (2011) · IEEE Transactions on Power Systems · doi:10.1109/tpwrs.2011.2111466 · Cited by 15
Reliability And Safety In Railway
Perpinyà, X. S. (2014) · Cited by 15
Real field mission profile oriented design of a SiC-based PV-inverter application
Sintamarean, C., Blaabjerg, F., Wang, H., & Yang, Y. (2013) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2013.6646804 · Cited by 14
Self-citationHigh-Efficiency High-Reliability Pulsed Power Converters for Industrial Processes
Carastro, C., Castellazzi, C., Clare, C., & Wheeler, W. L. (2012) · IEEE Transactions on Power Electronics · Cited by 14
Optimized 70kW power inverter dedicated to future aircraft applications
Maglie, R. D., Osvald, G., Engstler, J., Engler, A., & Carayon, J. (2009) · European Conference on Power Electronics and Applications · Cited by 12
Power module with solid state circuit breakers for fault-tolerant applications
Kriegel, Melkonyan, Galek, & Rackles (2010) · Cited by 8
Utility-scale grid-tied PV inverter reliability workshop summary report.
Granata, J. E., Quintana, M. A., Tasca, C., & Atcitty, S. (2011) · doi:10.2172/1029793 · Cited by 7
Power module with solid state circuit breakers for fault-tolerant applications
Kriegel, K., Melkonyan, A., Gałek, M., & Rackles, J. (2010) · Cited by 3
ROLE OF STATISTICAL VIS-A-VIS PHYSICS-OFFAILURE METHODS IN RELIABILITY ENGINEERING
Varde, P. V. (2009) · Journal of Reliability and Statistical Studies · Cited by 2
Research works printed but not linked: 17
- How to Measure Lifetime for Robustness Validation-Step by Step, ZVEL, Elea, Greece, Nov. 2012.
- H. Laukamp, "Reliability study of grid connected PV systems-Field experience and recommended design practice," IEA Int. Agency, Paris, France, Tech. Rep. IEA-PVPS T7-08: 2002, Mar. 2002.
- Navigant Consulting Inc., "A review of PV inverter technology cost and performance projection, National Renewable Energy Lab., Golden, CO, USA, Tech. Rep. NREL-SR-620-38771, Jan. 2006.
- D. Ton and W. Bower, Summary Report on the DOE High-Tech Inverter Workshop. Washington, DC, USA: U.S. Dept. Energy, Jan. 2005.
- C. Dubilier. (2013). Application Guide-Aluminum Elec- trolytic Capacitors [Online]. Available: http://www.cde.com/ catalogs/AEappGUIDE.pdf
- V. Crk. (2011). Reliability Engineering Challenges in Aerospace Industry, Presentation [Online]. Available: http://ieee.rackoneup.net/ rrvs/11/Reliability%20Engineering%20Challenges%20in%20Aerospace %20Industry.pdf
- Handbook for Robustness Validation of Automotive Electrical/Electronic Modules, ZVEL, Frankfurt am Main, Germany, Jun. 2013.
- U. Scheuermann, "Pragmatic bond wire model," in Proc. ECPE Work- shop Lifetime Model. Simul., Jul. 2013, pp. 1-9.
- A. Wintrich, U. Nicolai, W. Tursky, and T. Reimann, Application Manual Power Semiconductors. Nuremberg, Germany, Semikron, 2011.
- E. Wolfgang, "Examples for failures in power electronics systems," in Proc. Tuts. Rel. Power Electron. Syst., Apr. 2007, pp. 1-5.
- 2011). Report on Wind Turbine Reliability Profiles-Field Data Reliability Analysis [Online]. Available: http://www.reliawind.eu/ files/file-inline/110502_Reliawind Deliverable_D.1.3ReliabilityProfiles Results.pdf
- K. Chatterjee, M. Modarres, and J. B. Bernstein, "Fifty years of physics of failure," J. Rel. Inf. Anal. Center, vol. 20, no. 1, pp. 1-5, Jan. 2012.
- Military Handbook: Reliability Prediction of Electronic Equipment, Standard MIL-HDBK-217F, Dec. 1991.
- Physics of Failure Reliability Predictions, VMEbus International Trade Association, Standard ANSI/VITA 51.2, 2011.
- T. Jomier. (2009, Dec.). Final Public MOET Technical Report, EU FP6 Project on More Open Electrical Technologies [Online]. Available: http://www.eurtd.com/moet/
- R. De Maglie, G. Osvald, J. Engstler, A. Engler, and J. P. Carayon, "Opti- mized 70 kW power inverter dedicated to future aircraft applications," in Proc. 13th Eur. Conf. Power Electron. Appl., Sep. 2009, pp. 1-10.
- 2009, IEEE Standard Framework for the Reliability Prediction of Hardware
Cited by
Study and Handling Methods of Power IGBT Module Failures in Power Electronic Converter Systems
Choi, U.-M., Blaabjerg, F., & Lee, K.-B. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2373390 · Cited by 700
“However, wear-out failure occurs because of long-term degradation, and catastrophic failures are due to a single overstress event in a short duration [3].”
BackgroundSelf-citationDistributed Power-Generation Systems and Protection
Blaabjerg, F., Yang, Y., Yang, D., & Wang, X. (2017) · Proceedings of the IEEE · doi:10.1109/jproc.2017.2696878 · Cited by 671
“Design for reliability has been introduced to such systems [39], [40].”
BackgroundSelf-citationA Digital Twin Approach for Fault Diagnosis in Distributed Photovoltaic Systems
Jain, P., Poon, J., Singh, J. P., Spanos, C., Sanders, S. R., & Panda, S. K. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2911594 · Cited by 462
Ma, K., Liserre, M., Blaabjerg, F., & Kerekes, T. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2312335 · Cited by 460
“As mentioned earlier and also addressed in [2], [19], [36]–[38], thermal-related failures of power semiconductor devices (the focus of this paper) are just one”
BackgroundSelf-citationReliability of Power Electronic Systems: An Industry Perspective
Falck, J., Felgemacher, C., Rojko, A., Liserre, M., & Zacharias, P. (2018) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2018.2825481 · Cited by 336
Self-citation
Metadata
- Authors
- Wang, H., Liserre, M., Blaabjerg, F., de Place Rimmen, P., Jacobsen, J. B., Kvisgaard, T., & Landkildehus, J.
- Affiliations
- Aalborg University (DK)
- Christian-Albrechts-Universität zu Kiel (DE)
- Grundfos (Denmark) (DK)
- Danfoss (Denmark) (DK)
- Venue
- IEEE Journal of Emerging and Selected Topics in Power Electronics
- Published
- 2014-03
- Volume
- 2
- Issue
- 1
- Pages
- 97-114
- ISSN
- 2168-6777 (ISSN-L)
- 2168-6785
- OpenAlex
- W1982574138
- Cited by
- 693
- References
- 82
- Citations by year
- 2026: 37 · 2025: 43 · 2024: 59 · 2023: 68 · 2022: 51 · 2021: 58 · 2020: 61 · 2019: 69 · 2018: 73 · 2017: 53 · 2016: 52 · 2015: 47 · 2014: 21
- FWCI
- 24.00
- Type
- journal article
- Language
- en
- Open access
- bronze
- doi.org
- Locations
- IEEE Journal of Emerging and Selected Topics in Power Electronics (publishedVersion)
- VBN Forskningsportal (Aalborg Universitet) (publishedVersion, other-oa)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon Carbide Semiconductor Technologies
- Physical Sciences › Engineering › Safety, Risk, Reliability and Quality › Reliability and Maintenance Optimization
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Keywords
- power electronics reliability, physics of failure, power electronic components, reliability-based design, condition monitoring, intelligent control, reliability trends
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.