The DOI matches its Crossref record; 53 of the 53 references it cites were found in a registry or an index.
Recent Advances in the Design, Modeling, and Control of Multiphase Machines—Part I
Abstract
Multiphase machines are well recognized as an attractive alternative to conventional three-phase machines in a number of applications where high overall system reliability and reduction in total power per phase are required. The pace of developments in the field has accelerated in the last few years, and substantial knowledge has been recently generated. The main objective of the two-part survey named ‘Recent Advances in the Design, Modeling, and Control of Multiphase Machines’ is to present relevant contributions to encourage and guide new advances and developments in the field. More specifically, part 1 of the work analyzes the recent progress in the design, modeling, and control, including healthy operation, of multiphase motor drives, and discusses open challenges and future research directions in the area.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Multiphase Electric Machines for Variable-Speed Applications
Levi, E. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.918488 · Cited by 2,157
Multiphase induction motor drives – a technology status review
Levi, E., Bojoi, R., Profumo, F., Toliyat, H. A., & Williamson, S. (2007) · IET Electric Power Applications · doi:10.1049/iet-epa:20060342 · Cited by 1,619
Overview of Electric Motor Technologies Used for More Electric Aircraft (MEA)
Cao, W., Mecrow, B. C., Atkinson, G. J., Bennett, J. W., & Atkinson, D. J. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2165453 · Cited by 1,026
Che, H. S., Duran, M. J., Levi, E., Jones, M., Hew, W.-P., & Rahim, N. A. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2293195 · Cited by 394
Self-citationFault-Tolerant Interior-Permanent-Magnet Machines for Hybrid Electric Vehicle Applications
Parsa, L., & Toliyat, H. A. (2007) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2007.896978 · Cited by 317
Fault-Tolerant Control of Five-Phase Permanent-Magnet Motors With Trapezoidal Back EMF
Dwari, S., & Parsa, L. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2045322 · Cited by 289
Current Control Methods for an Asymmetrical Six-Phase Induction Motor Drive
Che, H. S., Levi, E., Jones, M., Hew, W.-P., & Rahim, N. A. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2248170 · Cited by 280
Strategies for the Fault-Tolerant Current Control of a Five-Phase Permanent-Magnet Motor
Bianchi, N., Bolognani, S., & Dai Pre, M. (2007) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2007.900445 · Cited by 276
Kianinezhad, R., Nahid-Mobarakeh, B., Baghli, L., Betin, F., & Capolino, G.-A. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.918479 · Cited by 266
Guzman, H., Duran, M. J., Barrero, F., Bogado, B., & Toral, S. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2289882 · Cited by 258
Self-citationAn Optimal Control Technique for Multiphase PM Machines Under Open-Circuit Faults
Dwari, S., & Parsa, L. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.920643 · Cited by 244
Guzman, H., Duran, M. J., Barrero, F., Zarri, L., Bogado, B., Gonzalez Prieto, I., & Arahal, M. R. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2418732 · Cited by 231
Self-citationBarrero, F., Arahal, M. R., Gregor, R., Toral, S., & Duran, M. J. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2011604 · Cited by 231
Self-citationFuzzy Logic and Sliding-Mode Controls Applied to Six-Phase Induction Machine With Open Phases
Fnaiech, M. A., Betin, F., Capolino, G.-A., & Fnaiech, F. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2034285 · Cited by 227
Global Fault-Tolerant Control Technique for Multiphase Permanent-Magnet Machines
Mohammadpour, A., & Parsa, L. (2015) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2014.2326084 · Cited by 216
Mohammadpour, A., Sadeghi, S., & Parsa, L. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2247011 · Cited by 210
Nguyen, N. K., Meinguet, F., Semail, E., & Kestelyn, X. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2386299 · Cited by 193
Analysis and Tests of a Dual Three-Phase 12-Slot 10-Pole Permanent-Magnet Motor
Barcaro, M., Bianchi, N., & Magnussen, F. (2010) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2010.2070784 · Cited by 173
Faulty Operations of a PM Fractional-Slot Machine With a Dual Three-Phase Winding
Barcaro, M., Bianchi, N., & Magnussen, F. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2087300 · Cited by 170
Slot Harmonic Impact on Rotor Losses in Fractional-Slot Permanent-Magnet Machines
Fornasiero, E., Bianchi, N., & Bolognani, S. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2168794 · Cited by 169
Operation of a Six-Phase Induction Machine Using Series-Connected Machine-Side Converters
Che, H. S., Levi, E., Jones, M., Duran, M. J., Hew, W.-P., & Rahim, N. A. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2248338 · Cited by 163
Self-citationKestelyn, X., & Semail, E. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2119454 · Cited by 162
Shamsi-Nejad, M.-A., Nahid-Mobarakeh, B., Pierfederici, S., & Meibody-Tabar, F. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.918485 · Cited by 160
Mohammadpour, A., & Parsa, L. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2223717 · Cited by 158
Ede, J. D., Atallah, K., Jewell, G. W., Wang, J., & Howe, D. (2007) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2007.904397 · Cited by 148
Experimental Tests of Dual Three-Phase Induction Motor Under Faulty Operating Condition
Alberti, L., & Bianchi, N. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2171175 · Cited by 138
Design of a Five-Phase Brushless DC Motor for a Safety Critical Aerospace Application
Huang, X., Goodman, A., Gerada, C., Fang, Y., & Lu, Q. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2172170 · Cited by 134
Brisset, S., Vizireanu, D., & Brochet, P. (2008) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2008.921379 · Cited by 130
Analysis and tests of a dual three-phase 12-slot 10-pole permanent magnet motor
Barcaro, M., Bianchi, N., & Magnussen, F. (2009) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2009.5316094 · Cited by 124
Gao, L., Fletcher, J., & Zheng, L. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2070775 · Cited by 120
Enhanced Optimal Torque Control of Fault-Tolerant PM Machine Under Flux-Weakening Operation
Sun, Z., Wang, J., Jewell, G. W., & Howe, D. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2029517 · Cited by 120
Salehifar, M., Arashloo, R. S., Moreno-Eguilaz, J. M., Sala, V., & Romeral, L. (2014) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2293518 · Cited by 118
Six-Phase Supply Feasibility Using a PM Fractional-Slot Dual Winding Machine
Barcaro, M., Bianchi, N., & Magnussen, F. (2011) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2011.2161859 · Cited by 117
Effect of Stator Winding Connection on Performance of Five-Phase Induction Machines
Abdel-Khalik, A. S., Morsy, A. S., Ahmed, S., & Massoud, A. M. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2242417 · Cited by 112
Baudart, F., Dehez, B., Matagne, E., Telteu-Nedelcu, D., Alexandre, P., & Labrique, F. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2170393 · Cited by 98
A Transformer-Less High-Power Converter for Large Permanent Magnet Wind Generator Systems
Yuan, X., Chai, J., & Li, Y. (2012) · IEEE Transactions on Sustainable Energy · doi:10.1109/tste.2012.2184806 · Cited by 97
Fault-Tolerant Operation of Multiphase Permanent-Magnet Machines Using Iterative Learning Control
Mohammadpour, A., Mishra, S., & Parsa, L. (2014) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2295537 · Cited by 87
Efficiency Improvement in DTC of Six-Phase Induction Machine by Adaptive Gradient Descent of Flux
Taheri, A., Rahmati, A., & Kaboli, S. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2163420 · Cited by 81
Shipboard Power Generation: Design and Development of a Medium-Voltage dc Generation System
Sulligoi, G., Tessarolo, A., Benucci, V., Millerani, A., Baret, M., & Luise, F. (2013) · IEEE Industry Applications Magazine · doi:10.1109/mias.2012.2215643 · Cited by 81
Investigation of a Novel Five-Phase Modular Permanent-Magnet In-Wheel Motor
Zheng, P., Sui, Y., Zhao, J., Tong, C., Lipo, T. A., & Wang, A. (2011) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2011.2150207 · Cited by 80
Electrical Machine Topologies: Hottest Topics in the Electrical Machine Research Community
Boglietti, A., EL-Refaie, A. M., Drubel, O., Omekanda, A. M., Bianchi, N., Agamloh, E. B., Popescu, M., di Gerlando, A., & Bartolo, J. B. (2014) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2013.2294077 · Cited by 77
Scuiller, F. (2013) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2013.2287855 · Cited by 73
Zheng, P., Wu, F., Lei, Y., Sui, Y., & Yu, B. (2013) · Energies · doi:10.3390/en6104980 · Cited by 67
Huang, J. E., Li, B., Jiang, H., & Kang, M. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2279371 · Cited by 66
Sulligoi, G., Tessarolo, A., Benucci, V., Baret, M., Rebora, A., & Taffone, A. (2010) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2010.2049726 · Cited by 56
Abdel-Khalik, A. S., Ahmed, S., Elserougi, A. A., & Massoud, A. M. (2014) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2014.2303254 · Cited by 50
Performance Evaluation of a Vector Control Fault-Tolerant Flux-Switching Motor Drive
Aboelhassan, M. O. E., Raminosoa, T., Goodman, A., Lillo, L. D., & Gerada, C. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2200221 · Cited by 49
Arashloo, R. S., Romeral, L., Salehifar, M., & Moreno‐Eguilaz, M. (2014) · IET Electric Power Applications · doi:10.1049/iet-epa.2013.0247 · Cited by 35
Fault diagnosis in six-phase induction motor using a current trajectory mass center
Foito, D., Maia, J., Pires, V. F., & Martins, J. F. (2014) · Measurement · doi:10.1016/j.measurement.2014.02.004 · Cited by 21
Direct current ripple compensation for multi-phase fault-tolerant machines
Hafez, A., Todd, R., Forsyth, A. J., & Cross, A. M. (2011) · IET Electric Power Applications · doi:10.1049/iet-epa.2009.0217 · Cited by 20
High-speed functionality optimization of five-phase PM machine using third harmonic current
Gong, J., Aslan, B., Gillon, F., & Semail, E. (2014) · COMPEL The International Journal for Computation and Mathematics in Electrical and Electronic Engineering · doi:10.1108/compel-10-2012-0220 · Cited by 9
Performance evaluation of a five-phase modular external rotor PM machine with different rotor poles
Abdel-Khalik, A. S., & Ahmed, S. (2012) · Alexandria Engineering Journal · doi:10.1016/j.aej.2012.09.003 · Cited by 8
Abdel-Khalik, A. S. (2012) · Modelling and Simulation in Engineering · doi:10.1155/2012/487203 · Cited by 4
Cited by
A Review on Multiphase Drives for Automotive Traction Applications
Salem, A., & Narimani, M. (2019) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2019.2956355 · Cited by 311
A Unified Analysis of the Fault Tolerance Capability in Six-Phase Induction Motor Drives
Munim, W. N. W. A., Duran, M. J., Che, H. S., Bermudez, M., Gonzalez-Prieto, I., & Rahim, N. A. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2632118 · Cited by 292
Self-citationMultiphase machines and drives - Revisited
Levi, E., Barrero, F., & Duran, M. J. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2493510 · Cited by 290
Self-citationDieterle, O., Greiner, T., & Heidrich, P. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2835422 · Cited by 25
“Furthermore, the PMSMmay produce rated power at the maximum [19], [26], [27].”
BackgroundAciego, J. J., Duran, M. J., Gonzalez-Prieto, I., & Barrero, F. (2024) · RE&PQJ · doi:10.24084/repqj15.359 · Cited by 3
Self-citation
Metadata
- Authors
- Barrero, F., & Duran, M. J.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2016-01
- Volume
- 63
- Issue
- 1
- Pages
- 449-458
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2208976213
- Cited by
- 927
- References
- 53
- FWCI
- 35.93
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.