The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Recent Advances in the Design, Modeling, and Control of Multiphase Machines—Part II
Abstract
The main objective of this two-part state-of-the-art paper called “Recent Advances in the Design, Modeling, and Control of Multiphase Machines” is to present latest contributions in the multiphase machines' field. The first part of this paper focuses on the recent progress in the design, modeling, and control, whereas the drive is in healthy operation. This second part presents relevant contributions in two not analyzed fields. The first is in relation with the use of the additional degrees of freedom of multiphase machines and the exploitation of their fault-tolerant capabilities without adding extra hardware. The second one analyzes multiphase generation, particularly in grid-connected wind energy conversion systems and stand-alone applications. Recent progresses are shown and open challenges and future research directions are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Multiphase Electric Machines for Variable-Speed Applications
Levi, E. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.918488 · Cited by 2,157
Multiphase induction motor drives – a technology status review
Levi, E., Bojoi, R., Profumo, F., Toliyat, H. A., & Williamson, S. (2007) · IET Electric Power Applications · doi:10.1049/iet-epa:20060342 · Cited by 1,619
Overview of Electric Motor Technologies Used for More Electric Aircraft (MEA)
Cao, W., Mecrow, B. C., Atkinson, G. J., Bennett, J. W., & Atkinson, D. J. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2165453 · Cited by 1,026
Che, H. S., Duran, M. J., Levi, E., Jones, M., Hew, W.-P., & Rahim, N. A. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2293195 · Cited by 394
Self-citationFault-Tolerant Interior-Permanent-Magnet Machines for Hybrid Electric Vehicle Applications
Parsa, L., & Toliyat, H. A. (2007) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2007.896978 · Cited by 317
Fault-Tolerant Control of Five-Phase Permanent-Magnet Motors With Trapezoidal Back EMF
Dwari, S., & Parsa, L. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2045322 · Cited by 289
Strategies for the Fault-Tolerant Current Control of a Five-Phase Permanent-Magnet Motor
Bianchi, N., Bolognani, S., & Dai Pre, M. (2007) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2007.900445 · Cited by 276
Kianinezhad, R., Nahid-Mobarakeh, B., Baghli, L., Betin, F., & Capolino, G.-A. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.918479 · Cited by 266
Guzman, H., Duran, M. J., Barrero, F., Bogado, B., & Toral, S. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2289882 · Cited by 258
Self-citationAn Optimal Control Technique for Multiphase PM Machines Under Open-Circuit Faults
Dwari, S., & Parsa, L. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.920643 · Cited by 244
Guzman, H., Duran, M. J., Barrero, F., Zarri, L., Bogado, B., Gonzalez Prieto, I., & Arahal, M. R. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2418732 · Cited by 231
Self-citationFuzzy Logic and Sliding-Mode Controls Applied to Six-Phase Induction Machine With Open Phases
Fnaiech, M. A., Betin, F., Capolino, G.-A., & Fnaiech, F. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2034285 · Cited by 227
Global Fault-Tolerant Control Technique for Multiphase Permanent-Magnet Machines
Mohammadpour, A., & Parsa, L. (2015) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2014.2326084 · Cited by 216
Mohammadpour, A., Sadeghi, S., & Parsa, L. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2247011 · Cited by 210
Nguyen, N. K., Meinguet, F., Semail, E., & Kestelyn, X. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2386299 · Cited by 193
Faulty Operations of a PM Fractional-Slot Machine With a Dual Three-Phase Winding
Barcaro, M., Bianchi, N., & Magnussen, F. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2087300 · Cited by 170
Operation of a Six-Phase Induction Machine Using Series-Connected Machine-Side Converters
Che, H. S., Levi, E., Jones, M., Duran, M. J., Hew, W.-P., & Rahim, N. A. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2248338 · Cited by 163
Self-citationKestelyn, X., & Semail, E. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2119454 · Cited by 162
Shamsi-Nejad, M.-A., Nahid-Mobarakeh, B., Pierfederici, S., & Meibody-Tabar, F. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.918485 · Cited by 160
Mohammadpour, A., & Parsa, L. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2223717 · Cited by 158
Experimental Tests of Dual Three-Phase Induction Motor Under Faulty Operating Condition
Alberti, L., & Bianchi, N. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2171175 · Cited by 138
Brisset, S., Vizireanu, D., & Brochet, P. (2008) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2008.921379 · Cited by 130
Enhanced Optimal Torque Control of Fault-Tolerant PM Machine Under Flux-Weakening Operation
Sun, Z., Wang, J., Jewell, G. W., & Howe, D. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2029517 · Cited by 120
Salehifar, M., Arashloo, R. S., Moreno-Eguilaz, J. M., Sala, V., & Romeral, L. (2014) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2293518 · Cited by 118
Effect of Stator Winding Connection on Performance of Five-Phase Induction Machines
Abdel-Khalik, A. S., Morsy, A. S., Ahmed, S., & Massoud, A. M. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2242417 · Cited by 112
Baudart, F., Dehez, B., Matagne, E., Telteu-Nedelcu, D., Alexandre, P., & Labrique, F. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2170393 · Cited by 98
A Transformer-Less High-Power Converter for Large Permanent Magnet Wind Generator Systems
Yuan, X., Chai, J., & Li, Y. (2012) · IEEE Transactions on Sustainable Energy · doi:10.1109/tste.2012.2184806 · Cited by 97
Fault-Tolerant Operation of Multiphase Permanent-Magnet Machines Using Iterative Learning Control
Mohammadpour, A., Mishra, S., & Parsa, L. (2014) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2295537 · Cited by 87
Shipboard Power Generation: Design and Development of a Medium-Voltage dc Generation System
Sulligoi, G., Tessarolo, A., Benucci, V., Millerani, A., Baret, M., & Luise, F. (2013) · IEEE Industry Applications Magazine · doi:10.1109/mias.2012.2215643 · Cited by 81
Sulligoi, G., Tessarolo, A., Benucci, V., Baret, M., Rebora, A., & Taffone, A. (2010) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2010.2049726 · Cited by 56
Abdel-Khalik, A. S., Ahmed, S., Elserougi, A. A., & Massoud, A. M. (2014) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2014.2303254 · Cited by 50
Performance Evaluation of a Vector Control Fault-Tolerant Flux-Switching Motor Drive
Aboelhassan, M. O. E., Raminosoa, T., Goodman, A., Lillo, L. D., & Gerada, C. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2200221 · Cited by 49
Arashloo, R. S., Romeral, L., Salehifar, M., & Moreno‐Eguilaz, M. (2014) · IET Electric Power Applications · doi:10.1049/iet-epa.2013.0247 · Cited by 35
Direct current ripple compensation for multi-phase fault-tolerant machines
Hafez, A., Todd, R., Forsyth, A. J., & Cross, A. M. (2011) · IET Electric Power Applications · doi:10.1049/iet-epa.2009.0217 · Cited by 20
Cited by
A Review on Multiphase Drives for Automotive Traction Applications
Salem, A., & Narimani, M. (2019) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2019.2956355 · Cited by 311
A Unified Analysis of the Fault Tolerance Capability in Six-Phase Induction Motor Drives
Munim, W. N. W. A., Duran, M. J., Che, H. S., Bermudez, M., Gonzalez-Prieto, I., & Rahim, N. A. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2632118 · Cited by 292
Self-citationMultiphase machines and drives - Revisited
Levi, E., Barrero, F., & Duran, M. J. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2493510 · Cited by 290
Self-citationDieterle, O., Greiner, T., & Heidrich, P. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2835422 · Cited by 25
“Furthermore, the PMSM may produce rated power at the maximum [19], [26], [27].”
Background
Metadata
- Authors
- Duran, M. J., & Barrero, F.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2016-01
- Volume
- 63
- Issue
- 1
- Pages
- 459-468
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W4242166568
- Cited by
- 658
- References
- 34
- FWCI
- 24.70
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.