The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Real-Time Motor Fault Detection by 1-D Convolutional Neural Networks
Abstract
Early detection of the motor faults is essential and artificial neural networks are widely used for this purpose. The typical systems usually encapsulate two distinct blocks: feature extraction and classification. Such fixed and hand-crafted features may be a suboptimal choice and require a significant computational cost that will prevent their usage for real-time applications. In this paper, we propose a fast and accurate motor condition monitoring and early fault-detection system using 1-D convolutional neural networks that has an inherent adaptive design to fuse the feature extraction and classification phases of the motor fault detection into a single learning body. The proposed approach is directly applicable to the raw data (signal), and, thus, eliminates the need for a separate feature extraction algorithm resulting in more efficient systems in terms of both speed and hardware. Experimental results obtained using real motor data demonstrate the effectiveness of the proposed method for real-time motor condition monitoring.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
ImageNet classification with deep convolutional neural networks
Krizhevsky, A., Sutskever, I., & Hinton, G. E. (2017) · Communications of the ACM · doi:10.1145/3065386 · Cited by 112,155
Receptive fields of single neurones in the cat's striate cortex
Hubel, D. H., & Wiesel, T. N. (1959) · The Journal of Physiology · doi:10.1113/jphysiol.1959.sp006308 · Cited by 4,653
Gao, Z., Cecati, C., & Ding, S. X. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2417501 · Cited by 3,135 · cited 1×
“In model-based methods, fault diagnosis algorithms are developed to monitor the consistency between the measured outputs of the practical systems and the model-predicted outputs [2].”
MethodReal-Time Patient-Specific ECG Classification by 1-D Convolutional Neural Networks
Kiranyaz, S., Ince, T., & Gabbouj, M. (2016) · IEEE Transactions on Biomedical Engineering · doi:10.1109/tbme.2015.2468589 · Cited by 1,912
Self-citationEvaluation of Pooling Operations in Convolutional Architectures for Object Recognition
Scherer, D., Müller, A., & Behnke, S. (2010) · Lecture Notes in Computer Science · doi:10.1007/978-3-642-15825-4_10 · Cited by 1,503
Wavelets for fault diagnosis of rotary machines: A review with applications
Yan, R., Gao, R. X., & Chen, X. (2014) · Signal Processing · doi:10.1016/j.sigpro.2013.04.015 · Cited by 1,446
Advances in Diagnostic Techniques for Induction Machines
Bellini, A., Filippetti, F., Tassoni, C., & Capolino, G.-A. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2007527 · Cited by 1,140
Deep, Big, Simple Neural Nets for Handwritten Digit Recognition
Cireşan, D. C., Meier, U., Gambardella, L. M., & Schmidhuber, J. (2010) · Neural Computation · doi:10.1162/neco_a_00052 · Cited by 1,078
Neural-network-based motor rolling bearing fault diagnosis
Li, B., Chow, M.-Y., Tipsuwan, Y., & Hung, J. C. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873214 · Cited by 797
Motor bearing damage detection using stator current monitoring
Schoen, R. R., Habetler, T. G., Kamran, F., & Bartfield, R. G. (1995) · IEEE Transactions on Industry Applications · doi:10.1109/28.475697 · Cited by 761
Cited by
Applications of machine learning to machine fault diagnosis: A review and roadmap
Lei, Y., Yang, B., Jiang, X., Jia, F., Li, N., & Nandi, A. K. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.106587 · Cited by 2,997
Deep learning and its applications to machine health monitoring
Zhao, R., Yan, R., Chen, Z., Mao, K., Wang, P., & Gao, R. X. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.05.050 · Cited by 2,894
1D convolutional neural networks and applications: A survey
Kiranyaz, S., Avci, O., Abdeljaber, O., Ince, T., Gabbouj, M., & Inman, D. J. (2021) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2020.107398 · Cited by 2,835
Self-citationA new convolutional neural network-based data-driven fault diagnosis method
Wen, L., Li, X., Gao, L., & Zhang, Y. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2774777 · Cited by 2,222
Zhang, W., Peng, G., Li, C., Chen, Y., & Zhang, Z. (2017) · Sensors · doi:10.3390/s17020425 · Cited by 1,925
Deep learning for smart manufacturing: Methods and applications
Wang, J., Ma, Y., Zhang, L., Gao, R. X., & Wu, D. (2018) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2018.01.003 · Cited by 1,740
Deep Residual Shrinkage Networks for Fault Diagnosis
Zhao, M., Zhong, S., Fu, X., Tang, B., & Pecht, M. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2019.2943898 · Cited by 1,447
Avci, O., Abdeljaber, O., Kiranyaz, S., Hussein, M., Gabbouj, M., & Inman, D. J. (2021) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2020.107077 · Cited by 1,442
Self-citationAbdeljaber, O., Avci, O., Kiranyaz, S., Gabbouj, M., & Inman, D. J. (2017) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2016.10.043 · Cited by 1,278
Self-citationMultiscale Convolutional Neural Networks for Fault Diagnosis of Wind Turbine Gearbox
Jiang, G., He, H., Yan, J., & Xie, P. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2844805 · Cited by 892
A survey on deep learning based bearing fault diagnosis
Hoang, D.-T., & Kang, H.-J. (2019) · Neurocomputing · doi:10.1016/j.neucom.2018.06.078 · Cited by 866
A review of the application of deep learning in intelligent fault diagnosis of rotating machinery
Zhu, Z., Lei, Y., Qi, G., Chai, Y., Mazur, N., An, Y., & Huang, X. (2023) · Measurement · doi:10.1016/j.measurement.2022.112346 · Cited by 731
A generic intelligent bearing fault diagnosis system using compact adaptive 1D CNN classifier
Eren, L., Ince, T., & Kiranyaz, S. (2019) · Journal of Signal Processing Systems · doi:10.1007/s11265-018-1378-3 · Cited by 723
Self-citationA CNN-RNN framework for crop yield prediction
Khaki, S., Wang, L., & Archontoulis, S. V. (2020) · Frontiers in Plant Science · doi:10.3389/fpls.2019.01750 · Cited by 722
“Similar convolutional models have been widely used in various application domains and found to be effective in improving prediction accuracy (Ince et al., 2016; Borovykh et al., 2017; Kiranyaz et al., 2019).”
MethodEstimation of Bearing Remaining Useful Life Based on Multiscale Convolutional Neural Network
Zhu, J., Chen, N., & Peng, W. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2844856 · Cited by 704
An automated system for epilepsy detection using EEG brain signals based on deep learning approach
Ullah, I., Hussain, M., Qazi, E.-U.-H., & Aboalsamh, H. (2018) · Expert Systems with Applications · doi:10.1016/j.eswa.2018.04.021 · Cited by 622
A comprehensive review on convolutional neural network in machine fault diagnosis
Jiao, J., Zhao, M., Lin, J., & Liang, K. (2020) · Neurocomputing · doi:10.1016/j.neucom.2020.07.088 · Cited by 575
Neupane, D., & Seok, J. (2020) · IEEE Access · doi:10.1109/access.2020.2990528 · Cited by 568
Fink, O., Wang, Q., Svensén, M., Dersin, P., Lee, W.-J., & Ducoffe, M. (2020) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2020.103678 · Cited by 549
Abdeljaber, O., Avci, O., Kiranyaz, M. S., Boashash, B., Sodano, H., & Inman, D. J. (2018) · Neurocomputing · doi:10.1016/j.neucom.2017.09.069 · Cited by 521
Wang, H., Liu, Z., Peng, D., & Qin, Y. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2019.2955540 · Cited by 519
Xu, Z., & Saleh, J. H. (2021) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2021.107530 · Cited by 500
Multi-Layer domain adaptation method for rolling bearing fault diagnosis
Li, X., Zhang, W., Ding, Q., & Sun, J.-Q. (2019) · Signal Processing · doi:10.1016/j.sigpro.2018.12.005 · Cited by 477
Chen, Z., Mauricio, A., Li, W., & Gryllias, K. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2020.106683 · Cited by 470
Cao, P., Zhang, S., & Tang, J. (2018) · IEEE Access · doi:10.1109/access.2018.2837621 · Cited by 460
DCNN-Based Multi-Signal Induction Motor Fault Diagnosis
Shao, S., Yan, R., Lu, Y., Wang, P., & Gao, R. X. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2019.2925247 · Cited by 442
Intelligent Bearing Fault Diagnosis Method Combining Compressed Data Acquisition and Deep Learning
Sun, J., Yan, C., & Wen, J. (2018) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2017.2759418 · Cited by 422
Deep residual learning-based fault diagnosis method for rotating machinery
Zhang, W., Li, X., & Ding, Q. (2019) · ISA Transactions · doi:10.1016/j.isatra.2018.12.025 · Cited by 416
Xiang, L., Wang, P., Yang, X., Hu, A., & Su, H. (2021) · Measurement · doi:10.1016/j.measurement.2021.109094 · Cited by 406
1-D Convolutional Neural Networks for Signal Processing Applications
Kiranyaz, S., Ince, T., Abdeljaber, O., Avci, O., & Gabbouj, M. (2019) · ICASSP 2019 - 2019 IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP) · doi:10.1109/icassp.2019.8682194 · Cited by 402
Self-citationMultireceptive Field Graph Convolutional Networks for Machine Fault Diagnosis
Li, T., Zhao, Z., Sun, C., Yan, R., & Chen, X. (2021) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2020.3040669 · Cited by 386
Zhao, M., Kang, M., Tang, B., & Pecht, M. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2762639 · Cited by 380
Jing, L., Wang, T., Zhao, M., & Wang, P. (2017) · Sensors · doi:10.3390/s17020414 · Cited by 379
A Motor Current Signal-Based Bearing Fault Diagnosis Using Deep Learning and Information Fusion
Hoang, D. T., & Kang, H. J. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2019.2933119 · Cited by 378
Kang, J., Park, Y.-J., Lee, J., Wang, S.-H., & Eom, D.-S. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2764861 · Cited by 368
Streamflow and rainfall forecasting by two long short-term memory-based models
Ni, L., Wang, D., Singh, V. P., Wu, J., Wang, Y., Tao, Y., & Zhang, J. (2020) · Journal of Hydrology · doi:10.1016/j.jhydrol.2019.124296 · Cited by 360
Real-Time Fault Detection and Identification for MMC Using 1-D Convolutional Neural Networks
Kiranyaz, S., Gastli, A., Ben-Brahim, L., Al-Emadi, N., & Gabbouj, M. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2833045 · Cited by 358
Self-citationDetecting Cyber Attacks in Industrial Control Systems Using Convolutional Neural Networks
Kravchik, M., & Shabtai, A. (2018) · Proceedings of the 2018 Workshop on Cyber-Physical Systems Security and PrivaCy · doi:10.1145/3264888.3264896 · Cited by 355
Peng, D., Wang, H., Liu, Z., Zhang, W., Zuo, M. J., & Chen, J. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2020.2967557 · Cited by 350
Intelligent Fault Diagnosis for Rotary Machinery Using Transferable Convolutional Neural Network
Chen, Z., Gryllias, K., & Li, W. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2019.2917233 · Cited by 342
Ma, G., Zhang, Y., Cheng, C., Zhou, B., Hu, P., & Yuan, Y. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.113626 · Cited by 342
Wang, H., Li, S., Song, L., & Cui, L. (2019) · Computers in Industry · doi:10.1016/j.compind.2018.12.013 · Cited by 338
A Time Series Transformer based method for the rotating machinery fault diagnosis
Jin, Y., Hou, L., & Chen, Y. (2022) · Neurocomputing · doi:10.1016/j.neucom.2022.04.111 · Cited by 336
Condition Monitoring using Machine Learning: A Review of Theory, Applications, and Recent Advances
Surucu, O., Gadsden, S. A., & Yawney, J. (2023) · Expert Systems with Applications · doi:10.1016/j.eswa.2023.119738 · Cited by 336
Saufi, S. R., Ahmad, Z. A. B., Leong, M. S., & Lim, M. H. (2019) · IEEE Access · doi:10.1109/access.2019.2938227 · Cited by 312
Early Fault Detection of Machine Tools Based on Deep Learning and Dynamic Identification
Luo, B., Wang, H., Liu, H., Li, B., & Peng, F. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2807414 · Cited by 307
Elahi, M., Afolaranmi, S. O., Martinez Lastra, J. L., & Perez Garcia, J. A. (2023) · Discover Artificial Intelligence · doi:10.1007/s44163-023-00089-x · Cited by 303
Domain Adversarial Transfer Network for Cross-Domain Fault Diagnosis of Rotary Machinery
Chen, Z., He, G., Li, J., Liao, Y., Gryllias, K., & Li, W. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2020.2995441 · Cited by 300
Pan, J., Zi, Y., Chen, J., Zhou, Z., & Wang, B. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2767540 · Cited by 294
Sensor Fault Classification Based on Support Vector Machine and Statistical Time-Domain Features
Jan, S. U., Lee, Y.-D., Shin, J., & Koo, I. (2017) · IEEE Access · doi:10.1109/access.2017.2705644 · Cited by 291
Peng, D., Liu, Z., Wang, H., Qin, Y., & Jia, L. (2019) · IEEE Access · doi:10.1109/access.2018.2888842 · Cited by 271
Li, X., Zhang, W., & Ding, Q. (2018) · Neurocomputing · doi:10.1016/j.neucom.2018.05.021 · Cited by 271
Guo, L., Lei, Y., Li, N., Yan, T., & Li, N. (2018) · Neurocomputing · doi:10.1016/j.neucom.2018.02.083 · Cited by 270
Cloud-Based Digital Twinning for Structural Health Monitoring Using Deep Learning
Dang, H., Tatipamula, M., & Nguyen, H. X. (2022) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2021.3115119 · Cited by 270
Wang, S., Xiang, J., Zhong, Y., & Zhou, Y. (2018) · Knowledge-Based Systems · doi:10.1016/j.knosys.2017.12.027 · Cited by 269
Motor Fault Diagnostics Based on Current Signatures: A Review
Niu, G., Dong, X., & Chen, Y. (2023) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2023.3285999 · Cited by 269
One-Dimensional CNN-Based Intelligent Recognition of Vibrations in Pipeline Monitoring With DAS
Wu, H., Chen, J., Liu, X., Xiao, Y., Wang, M., Zheng, Y., & Rao, Y. (2019) · Journal of Lightwave Technology · doi:10.1109/jlt.2019.2923839 · Cited by 267
A hybrid classification autoencoder for semi-supervised fault diagnosis in rotating machinery
Wu, X., Zhang, Y., Cheng, C., & Peng, Z. (2021) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2020.107327 · Cited by 266
Intelligent Fault Diagnosis Method Based on Full 1-D Convolutional Generative Adversarial Network
Guo, Q., Li, Y., Song, Y., Wang, D., & Chen, W. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2019.2934901 · Cited by 262
Kong, Z., Tang, B., Deng, L., Liu, W., & Han, Y. (2020) · Renewable Energy · doi:10.1016/j.renene.2019.07.033 · Cited by 258
Bearing fault detection by one-dimensional convolutional neural networks
Eren, L. (2017) · Mathematical Problems in Engineering · doi:10.1155/2017/8617315 · Cited by 250
Self-citationLi, S., Liu, G., Tang, X., Lu, J., & Hu, J. (2017) · Sensors · doi:10.3390/s17081729 · Cited by 211
Faults and Diagnosis Methods of Permanent Magnet Synchronous Motors: A Review
Chen, Y., Liang, S., Li, W., Liang, H., & Wang, C. (2019) · Applied Sciences · doi:10.3390/app9102116 · Cited by 194
Multiple wavelet coefficients fusion in deep residual networks for fault diagnosis
Zhao, M., Kang, M., Tang, B., & Pecht, M. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2866050 · Cited by 174
Li, Y., Bao, T., Gao, Z., Shu, X., Zhang, K., Xie, L., & Zhang, Z. (2022) · Structural Health Monitoring · doi:10.1177/14759217211009780 · Cited by 132
Jiao, J., Zhao, M., Lin, J., & Zhao, J. (2018) · Knowledge-Based Systems · doi:10.1016/j.knosys.2018.07.017 · Cited by 127
Han, Y., Tang, B., & Deng, L. (2019) · Computers in Industry · doi:10.1016/j.compind.2019.01.012 · Cited by 111
Lekha, S., & M, S. (2021) · IEEE Reviews in Biomedical Engineering · doi:10.1109/rbme.2020.2993591 · Cited by 105
Explainable 1-D convolutional neural network for damage detection using Lamb wave
Pandey, P., Rai, A., & Mitra, M. (2022) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2021.108220 · Cited by 100
Fault diagnosis of high-speed train bogie by residual-squeeze net
Su, L., Ma, L., Qin, N., Huang, D., & Kemp, A. H. (2019) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2019.2907373 · Cited by 102
“In contrast to them, the 1-D convolutional network allows learning the best possible features directly from the raw data and achieving high accuracy with a low computational complexity [22].”
S., P., Krithivasan, K., S., P., & Sriram V.S., S. (2020) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2020.2977872 · Cited by 88
Appana, D. K., Prosvirin, A., & Kim, J.-M. (2018) · Soft Computing · doi:10.1007/s00500-018-3256-0 · Cited by 86
Graph neural networks for multivariate time series regression with application to seismic data
Bloemheuvel, S., van den Hoogen, J., Jozinović, D., Michelini, A., & Atzmueller, M. (2023) · International Journal of Data Science and Analytics · doi:10.1007/s41060-022-00349-6 · Cited by 75
Pietrzak, P., & Wolkiewicz, M. (2021) · Electronics · doi:10.3390/electronics10151786 · Cited by 54
AI-enabled predictive maintenance framework for autonomous mobile cleaning robots
Pookkuttath, S., Rajesh Elara, M., Sivanantham, V., & Ramalingam, B. (2021) · Sensors · doi:10.3390/s22010013 · Cited by 44
Health monitoring for balancing tail ropes of a hoisting system using a convolutional neural network
Zhou, P., Zhou, G., Zhu, Z., Tang, C., He, Z., Li, W., & Jiang, F. (2018) · Applied Sciences · doi:10.3390/app8081346 · Cited by 36
Predicting AC Optimal Power Flows: Combining Deep Learning and Lagrangian Dual Methods
Fioretto, F., Mak, T. W. K., & Van Hentenryck, P. (2020) · Proceedings of the AAAI Conference on Artificial Intelligence · doi:10.1609/aaai.v34i01.5403 · Cited by 29
Metadata
- Authors
- Ince, T., Kiranyaz, S., Eren, L., Askar, M., & Gabbouj, M.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2016-11
- Volume
- 63
- Issue
- 11
- Pages
- 7067-7075
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2461729787
- Cited by
- 1,407
- References
- 35
- FWCI
- 72.67
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.