Dislocated Time Series Convolutional Neural Architecture: An Intelligent Fault Diagnosis Approach for Electric Machine
The DOI matches its Crossref record; 35 of the 36 references it cites were found in a registry or an index.
Abstract
In most current intelligent diagnosis methods, fault classifiers of electric machine are built based on complex handcrafted features extractor from raw signals, which depend on prior knowledge and is difficult to implement intelligentization authentically. In addition, the increasingly complicated industrial structures and data make handcrafted features extractors less suited. Convolutional neural network (CNN) provides an efficient method to act on raw signals directly by weight sharing and local connections without feature extractors. However, effective as CNN works on image recognition, it does not work well in industrial applications due to the differences between image and industrial signals. Inspired by the idea of CNN, we develop a novel diagnosis framework based on the characteristics of industrial vibration signals, which is called dislocated time series CNN (DTS-CNN). The DTS-CNN architecture is composed of dislocate layer, convolutional layer, sub-sampling layer and fully connected layer. By adding a dislocate layer, this model can extract the relationship between signals with different intervals in periodic mechanical signals, thereby overcome the weaknesses of traditional CNNs and is more applicable for modern electric machines, especially under nonstationary conditions. Experiments under constant and nonstationary conditions are performed on a machine fault simulator to validate the proposed framework. The results and comparison with respect to the state of the art in the field is illustrated in detail, which highlights the superiority of the proposed method in industrial applications.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
ImageNet classification with deep convolutional neural networks
Krizhevsky, A., Sutskever, I., & Hinton, G. E. (2017) · Communications of the ACM · doi:10.1145/3065386 · Cited by 112,155
Gradient-based learning applied to document recognition
Lecun, Y., Bottou, L., Bengio, Y., & Haffner, P. (1998) · Proceedings of the IEEE · doi:10.1109/5.726791 · Cited by 58,805 · cited 3×
“[20], we proposed an improved convolutional neural network (CNN) architecture based on the characteristics of mechanical signals, which is called the dislocated time-series CNN (DTS-CNN).”
BackgroundMethod(2014) · Cited by 33,419
Huang, N. E., Shen, Z., Long, S. R., Wu, M. C., Shih, H. H., Zheng, Q., Yen, N.-C., Tung, C. C., & Liu, H. H. (1998) · Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rspa.1998.0193 · Cited by 23,564 · cited 1×
“To extract representative features from the complex and nonstationary noisy signal, numerous vibration signal processing approaches have been developed such as statistic analysis, Fourier transform [12], wavelet transform [13], empirical mode decomposition (EMD) [14], and sparse representation [15], which is developed…”
MethodRepresentation Learning: A Review and New Perspectives
Bengio, Y., Courville, A., & Vincent, P. (2013) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.2013.50 · Cited by 13,001 · cited 1×
“And this ability to automatically learn powerful and proper features will make the mechanical fault diagnosis system real artificial intelligence and become increasingly important as the amount and kind of industrial system continue to grow [21].”
BackgroundReceptive fields and functional architecture of monkey striate cortex
Hubel, D. H., & Wiesel, T. N. (1968) · The Journal of Physiology · doi:10.1113/jphysiol.1968.sp008455 · Cited by 6,568 · cited 1×
“Begins with neuroscientific experiments, CNN have been mainly influenced by Hubel and Wiesel’s early work on the vision cortex working mechanisms of mammalian brain [22], [23].”
MethodImproving neural networks by preventing co-adaptation of feature detectors
Hinton, G. E., Srivastava, N., Krizhevsky, A., Sutskever, I., & Salakhutdinov, R. R. (2012) · arXiv · doi:10.48550/arxiv.1207.0580 · Cited by 6,382
Atomic Decomposition by Basis Pursuit
Chen, S. S., Donoho, D. L., & Saunders, M. A. (2001) · SIAM Review · doi:10.1137/s003614450037906x · Cited by 5,085
A review on machinery diagnostics and prognostics implementing condition-based maintenance
Jardine, A. K. S., Lin, D., & Banjevic, D. (2006) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2005.09.012 · Cited by 4,816 · cited 1×
“Data acquisition is a process of collecting and storing useful data (information) from targeted physical equipments [10].”
BackgroundReceptive fields of single neurones in the cat's striate cortex
Hubel, D. H., & Wiesel, T. N. (1959) · The Journal of Physiology · doi:10.1113/jphysiol.1959.sp006308 · Cited by 4,653 · cited 1×
“Begins with neuroscientific experiments, CNN have been mainly influenced by Hubel and Wiesel’s early work on the vision cortex working mechanisms of mammalian brain [22], [23].”
Method
Research works printed but not linked: 1
- goodfellow, 2016, Deep Learning
Cited by
Applications of machine learning to machine fault diagnosis: A review and roadmap
Lei, Y., Yang, B., Jiang, X., Jia, F., Li, N., & Nandi, A. K. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.106587 · Cited by 2,997
Self-citationDeep learning and its applications to machine health monitoring
Zhao, R., Yan, R., Chen, Z., Mao, K., Wang, P., & Gao, R. X. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.05.050 · Cited by 2,894
Artificial intelligence for fault diagnosis of rotating machinery: A review
Liu, R., Yang, B., Zio, E., & Chen, X. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.02.016 · Cited by 2,188
Self-citationDeep Residual Shrinkage Networks for Fault Diagnosis
Zhao, M., Zhong, S., Fu, X., Tang, B., & Pecht, M. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2019.2943898 · Cited by 1,447
Deep Learning Algorithms for Bearing Fault Diagnostics—A Comprehensive Review
Zhang, S., Zhang, S., Wang, B., & Habetler, T. G. (2020) · IEEE Access · doi:10.1109/access.2020.2972859 · Cited by 913
“Similar to earlier work [104]–[106], [107] implements a 4layer CNN structure with 2 convolutional and 2 pooling layers employing both the CWRU dataset & dataset generated by Qian Peng Company in China, and the accuracy outperforms the conventional SVM and the shallow Softmax regression classifier, especially when the…”
BackgroundMethodMultiscale Convolutional Neural Networks for Fault Diagnosis of Wind Turbine Gearbox
Jiang, G., He, H., Yan, J., & Xie, P. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2844805 · Cited by 892
“For this reason, we inject additive Gaussian white noise [39] to the raw vibration signals to construct noisy signals with different signal-to-noise ratios (SNRs).”
MethodA review of the application of deep learning in intelligent fault diagnosis of rotating machinery
Zhu, Z., Lei, Y., Qi, G., Chai, Y., Mazur, N., An, Y., & Huang, X. (2023) · Measurement · doi:10.1016/j.measurement.2022.112346 · Cited by 731
Estimation of Bearing Remaining Useful Life Based on Multiscale Convolutional Neural Network
Zhu, J., Chen, N., & Peng, W. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2844856 · Cited by 704
“[24] added a dislocated layer before convolutional layer by considering the properties of industrial signal, thus revealed the relationship between signals with inconsistent impact intervals.”
BackgroundHan, T., Liu, C., Yang, W., & Jiang, D. (2020) · ISA Transactions · doi:10.1016/j.isatra.2019.08.012 · Cited by 578
A comprehensive review on convolutional neural network in machine fault diagnosis
Jiao, J., Zhao, M., Lin, J., & Liang, K. (2020) · Neurocomputing · doi:10.1016/j.neucom.2020.07.088 · Cited by 575
Liu, Z., & Zhang, L. (2020) · Measurement · doi:10.1016/j.measurement.2019.107002 · Cited by 535
Wang, H., Liu, Z., Peng, D., & Qin, Y. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2019.2955540 · Cited by 519
“D CNN (2DCNN) to implement fault diagnosis [15], [18], [20], [25]–[27].”
BackgroundMethodA systematic review of deep transfer learning for machinery fault diagnosis
Li, C., Zhang, S., Qin, Y., & Estupinan, E. (2020) · Neurocomputing · doi:10.1016/j.neucom.2020.04.045 · Cited by 472
Chen, Z., Mauricio, A., Li, W., & Gryllias, K. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2020.106683 · Cited by 470
Liu, R., Wang, F., Yang, B., & Qin, S. J. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2019.2941868 · Cited by 454
“Convolutional neural networks (CNNs) [16], deep belief networks (DBNs) [17], [18], residual CNN (ResCNN) [19], and autoencoders (SAEs) [20] are popular deep learning methods used for various fault diagnosis applications.”
BackgroundSelf-citationRemaining Useful Life Prediction Based on a Double-Convolutional Neural Network Architecture
Yang, B., Liu, R., & Zio, E. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2924605 · Cited by 429
“Therefore, although data-driven methods reduce the dependence on prior knowledge, the results are still highly dependent on experience [17].”
BackgroundSelf-citationMulti-head CNN–RNN for multi-time series anomaly detection: An industrial case study
Canizo, M., Triguero, I., Conde, A., & Onieva, E. (2019) · Neurocomputing · doi:10.1016/j.neucom.2019.07.034 · Cited by 420
“Unlike other approaches [26, 32, 33], we utilize an independent CNN to process each sensor data.”
BackgroundMethodLimited Data Rolling Bearing Fault Diagnosis With Few-Shot Learning
Zhang, A., Li, S., Cui, Y., Yang, W., Dong, R., & Hu, J. (2019) · IEEE Access · doi:10.1109/access.2019.2934233 · Cited by 419
“Deep learning methods have also been applied to fault diagnosis and obtained state-of-the-art results [6] using techniques such as auto-encoders (AE) [12]–[15], restricted boltzmann machine (RBM) [16]–[19], convolutional neural networks (CNNs) [20]–[24], recurrent neural”
MethodMechanical fault diagnosis using Convolutional Neural Networks and Extreme Learning Machine
Chen, Z., Gryllias, K., & Li, W. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.106272 · Cited by 390
Tama, B. A., Vania, M., Lee, S., & Lim, S. (2023) · Artificial Intelligence Review · doi:10.1007/s10462-022-10293-3 · Cited by 345
“The authors in (Liu et al. 2017) propose a method called dislocated time series CNN to develop a new diagnosis framework based on the characteristics of industrial vibration signals.”
MethodIntelligent Fault Diagnosis for Rotary Machinery Using Transferable Convolutional Neural Network
Chen, Z., Gryllias, K., & Li, W. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2019.2917233 · Cited by 342
“Liu et al. [21] developed a dislocated time series CNN to capture the relationship between different fault signals, presenting improved fault classification capability of an induction motor.”
BackgroundFault diagnosis of rotating machinery based on recurrent neural networks
Zhang, Y., Zhou, T., Huang, X., Cao, L., & Zhou, Q. (2021) · Measurement · doi:10.1016/j.measurement.2020.108774 · Cited by 339
Wang, H., Li, S., Song, L., & Cui, L. (2019) · Computers in Industry · doi:10.1016/j.compind.2018.12.013 · Cited by 338
Multi-scale deep intra-class transfer learning for bearing fault diagnosis
Wang, X., Shen, C., Xia, M., Wang, D., Zhu, J., & Zhu, Z. (2020) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2020.107050 · Cited by 313
“Liu et al. [16] presented a new model for the fault diagnosis of electric machines by inserting a dislocated layer before the convolution operation to enable the convolutional neural network (CNN) to deal with mechanical periodic signals.”
BackgroundHakim, M., Omran, A. A. B., Ahmed, A. N., Al-Waily, M., & Abdellatif, A. (2023) · Ain Shams Engineering Journal · doi:10.1016/j.asej.2022.101945 · Cited by 305
Early Fault Detection of Machine Tools Based on Deep Learning and Dynamic Identification
Luo, B., Wang, H., Liu, H., Li, B., & Peng, F. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2807414 · Cited by 307
“[29] designed a dislocated time series convolutional neural architecture to learn electric”
BackgroundDeep learning models for predictive maintenance: a survey, comparison, challenges and prospects
Serradilla, O., Zugasti, E., Rodriguez, J., & Zurutuza, U. (2022) · Applied Intelligence · doi:10.1007/s10489-021-03004-y · Cited by 302
“- Simple yet effective - Slower training due to the large Bearing diagnosis [17, 39], electric - Faster than traditional ML number of weights motor [77], gearbox [130], turbofan models in production - Analyse data in chunks and fail [9, 67], Numenta Anomaly -”
Han, T., Li, Y.-F., & Qian, M. (2021) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2021.3088489 · Cited by 288
“…Besides, several other state-of-the-art deep models in machinery fault diagnosis are also tested, including the dislocated time series CNN (DTSCNN) [14], the long short-term memory (LSTM) network [18], the deep residual network (ResNet) [28], the deep capsule network (CapsuleNet) [39], and the…”
BackgroundHuang, R., Li, J., Liao, Y., Chen, J., Wang, Z., & Li, W. (2021) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2020.3042300 · Cited by 264
“…extreme learning machine (ELM) [22], deep belief networks (DBNs) [6], stacked autoencoders (SAEs) [23]–[25], convolutional neural networks (CNNs) [26], capsule networks (CNs) [27], long short-term memory (LSTM) recurrent networks [28], and deep fuzzy echo state networks (DFESNs) [29], [30], have…”
BackgroundIntelligent Fault Diagnosis Method Based on Full 1-D Convolutional Generative Adversarial Network
Guo, Q., Li, Y., Song, Y., Wang, D., & Chen, W. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2019.2934901 · Cited by 262
“[19] added a misaligned layer to establish a misaligned time series convolutional neural structure.”
BackgroundLu, S., Chai, H., Sahoo, A., & Phung, B. T. (2020) · IEEE Transactions on Dielectrics and Electrical Insulation · doi:10.1109/tdei.2020.009070 · Cited by 258
“Besides the three aforementioned conversion methods, reshaping is another method which is one of the most popular 1D-to-2D conversion methods in fault diagnosis in other fields, such as bearing fault diagnosis and photovoltaic fault diagnosis [119, 120].”
MethodGuo, S., Zhang, B., Yang, T., Lyu, D., & Gao, W. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2942548 · Cited by 224
“These methods focus on the construction of network input [13], [14], structure of deep learning algo-rithm [15], [16], and selection of hyperparameters [17].”
MethodA hybrid attention improved ResNet based fault diagnosis method of wind turbines gearbox
Zhang, K., Tang, B., Deng, L., & Liu, X. (2021) · Measurement · doi:10.1016/j.measurement.2021.109491 · Cited by 211
Fault Diagnosis of Hydraulic Systems Based on Deep Learning Model With Multirate Data Samples
Huang, K., Wu, S., Li, F., Yang, C., & Gui, W. (2022) · IEEE Transactions on Neural Networks and Learning Systems · doi:10.1109/tnnls.2021.3083401 · Cited by 207
“Based on the characteristics of the industrial vibration signal, a misplaced time-series CNN is proposed in [16].”
BackgroundLiu, R., Yang, B., & Hauptmann, A. G. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2019.2915536 · Cited by 204
“It has been successfully applied in damage localization in plate-like structures [19]–[21], fault diagnosis of motors [22], bearings [23], and other important components in industrial systems.”
MethodSelf-citationSparse Deep Stacking Network for Fault Diagnosis of Motor
Sun, C., Ma, M., Zhao, Z., & Chen, X. (2018) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2018.2819674 · Cited by 202
“Liu proposed a CNNbased diagnosis process for fault pattern recognition of motor [13].”
BackgroundSelf-citationReview on Machine Learning Algorithm Based Fault Detection in Induction Motors
Kumar, P., & Hati, A. S. (2021) · Archives of Computational Methods in Engineering · doi:10.1007/s11831-020-09446-w · Cited by 200
“The implementation of AI technique in real world requires the feature extraction and feature vector as an input vector [55].”
MethodData-driven machinery fault diagnosis: A comprehensive review
Neupane, D., Bouadjenek, M. R., Dazeley, R., & Aryal, S. (2025) · Neurocomputing · doi:10.1016/j.neucom.2025.129588 · Cited by 178
Wang, H., Li, S., Song, L., Cui, L., & Wang, P. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2019.2928346 · Cited by 186
“Liu et al. [30] proposed to solve the fault diagnosis of unstable modern motors by adding a dislocated layer in the time series CNN. Time–frequency images based on wavelet analysis can also be diagnosed by CNN [31].”
BackgroundA hierarchical deep domain adaptation approach for fault diagnosis of power plant thermal system
Wang, X., He, H., & Li, L. (2019) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2019.2899118 · Cited by 185
“[12], [13], stacked denoising autoencoder (SDAE) [11], and deep belief networks [14], which capture representative fault features from raw data and predict targets.”
BackgroundMulti-scale Dense Gate Recurrent Unit Networks for bearing remaining useful life prediction
Ren, L., Cheng, X., Wang, X., Cui, J., & Zhang, L. (2019) · Future Generation Computer Systems · doi:10.1016/j.future.2018.12.009 · Cited by 179
Yang, D., Gao, X., Kong, L., Pang, Y., & Zhou, B. (2020) · IEEE Transactions on Consumer Electronics · doi:10.1109/tce.2020.2977964 · Cited by 179
“On the one hand, it is a tall order to empirically design the hand-crafted features dependent upon comprehensive understanding of the prior knowledge; on the other hand, much time domain information will be lost in dimensionality reduction during feature selection process [18].”
BackgroundHan, T., Liu, C., Yang, W., & Jiang, D. (2019) · ISA Transactions · doi:10.1016/j.isatra.2019.03.017 · Cited by 174
Role of artificial intelligence in rotor fault diagnosis: a comprehensive review
Nath, A. G., Udmale, S. S., & Singh, S. K. (2021) · Artificial Intelligence Review · doi:10.1007/s10462-020-09910-w · Cited by 172
Deep Coupled Dense Convolutional Network With Complementary Data for Intelligent Fault Diagnosis
Jiao, J., Zhao, M., Lin, J., & Ding, C. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2902817 · Cited by 169
“Through the review of literature, the CNN structures used in intelligent fault diagnosis usually contain 1–4 convolutional layers [12]–[16].”
BackgroundQian, W., Li, S., Yi, P., & Zhang, K. (2019) · Measurement · doi:10.1016/j.measurement.2019.02.073 · Cited by 165
Domain Adaptive Motor Fault Diagnosis Using Deep Transfer Learning
Xiao, D., Huang, Y., Zhao, L., Qin, C., Shi, H., & Liu, C. (2019) · IEEE Access · doi:10.1109/access.2019.2921480 · Cited by 160
“…MMD can be rewritten with embedding kernels as follows to empirically estimate. where K ( · ) represents the kernel function, x iS ∈ X S , and CNN, as a type of most state-of-the-art deep learning model, has been effectively used for a variety of fault diagnosis and health monitoring problems [23].”
BackgroundDeep Convolutional Neural Networks: Structure, Feature Extraction and Training
Namatēvs, I. (2017) · Information Technology and Management Science · doi:10.1515/itms-2017-0007 · Cited by 160
Qiao, H., Wang, T., Wang, P., Qiao, S.-B., & Zhang, L. (2018) · Sensors · doi:10.3390/s18092932 · Cited by 155
“The framework of the traditional data-driven MHM system includes four steps: signal acquisition, feature extraction, feature reduction and condition classification or prediction [2,3].”
BackgroundMethodInfluentialDA-DCGAN: An Effective Methodology for DC Series Arc Fault Diagnosis in Photovoltaic Systems
Lu, S., Sirojan, T., Phung, B. T., Zhang, D., & Eliathamby Ambikairajah, A. (2019) · IEEE Access · doi:10.1109/access.2019.2909267 · Cited by 171
“fields such as high impedance fault detection in medium voltage networks [8], failure detection in electrical machines [9], and track circuit fault in railway systems [10].”
BackgroundGrezmak, J. E., Zhang, J., Wang, P. E., Loparo, K. A., & Gao, R. X. (2019) · IEEE Sensors Journal · doi:10.1109/jsen.2019.2958787 · Cited by 166
“[15] proposed a method for induction motor fault diagnosis from motor vibration signals based on a CNN with a dislocate layer to capture fault patterns at different time scales.”
MethodRobust Interpretable Deep Learning for Intelligent Fault Diagnosis of Induction Motors
Abid, F. B., Sallem, M., & Braham, A. (2019) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2019.2932162 · Cited by 154
Deep Learning for Time-Series Prediction in IIoT: Progress, Challenges, and Prospects
Ren, L., Jia, Z., Laili, Y., & Huang, D. (2023) · IEEE Transactions on Neural Networks and Learning Systems · doi:10.1109/tnnls.2023.3291371 · Cited by 184
Niu, G., Liu, E., Wang, X., Ziehl, P. H., & Zhang, B. (2022) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2022.3179011 · Cited by 142
“D CNN) [28], hierarchical CNN (HCNN) with a matrix reconstruction method [29], deep CNN with wide first-layer kernels (WDCNN) [30], and dislocated time series CNN (DTS-CNN) [31].”
MethodContrastive learning based self-supervised time-series analysis
Pöppelbaum, J., Chadha, G. S., & Schwung, A. (2022) · Applied Soft Computing · doi:10.1016/j.asoc.2021.108397 · Cited by 131
A Robust Weight-Shared Capsule Network for Intelligent Machinery Fault Diagnosis
Huang, R., Li, J., Wang, S., Li, G., & Li, W. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2020.2964117 · Cited by 131
“Rolling bearings are key components in RM [38], [39], e.g., automobile transmissions, aircrafts, machine tools, high-speed rails, and wind turbines [8], and are liable to degrade the health status during long-term operation [40], [41].”
BackgroundYu, X. L., Liang, Z., Wang, Y., Yin, H., Liu, X., Yu, W., & Huang, Y. (2022) · Measurement · doi:10.1016/j.measurement.2022.111597 · Cited by 133
Enhanced K-Nearest Neighbor for Intelligent Fault Diagnosis of Rotating Machinery
Lu, J., Qian, W., Li, S., & Cui, R. (2021) · Applied Sciences · doi:10.3390/app11030919 · Cited by 128
“[16] constructed a novel CNN which can take vibration signals as inputs directly.”
BackgroundZhu, J., Huang, C., Shen, C., & Shen, Y. (2021) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2021.3138558 · Cited by 124
“Given the characteristics of industrial vibration signals, a modified CNN model was proposed in [10] to find the relationship between signals with various intervals in the periodic mechanical data.”
MethodDomain Knowledge-Based Deep-Broad Learning Framework for Fault Diagnosis
Feng, J. Y., Yao, Y., Lu, S., & Liu, Y. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2020.2982085 · Cited by 125
“Liu et al. [29] proposed a dislocated time-series CNN that has the new dislocated layer to handle a diagnosis problem with mechanical periodic signals.”
BackgroundClassifier Inconsistency-Based Domain Adaptation Network for Partial Transfer Intelligent Diagnosis
Jiao, J., Zhao, M. J., Lin, J., & Ding, C. (2019) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2019.2956294 · Cited by 116
“Among the numerous diagnosis methods, deeplearningstandsoutandisbeingextensivelystudiedrecently [6],[7].”
Han, Y., Tang, B., & Deng, L. (2019) · Computers in Industry · doi:10.1016/j.compind.2019.01.012 · Cited by 111
Zheng, H., Yang, Y., Yin, J., Li, Y., Wang, R., & Xu, M. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2020.3016068 · Cited by 139
“The filter sizes of the convolutional layers are searched from [16, 64], [3, 9], [3, 9], [3, 9], and [3, 9], while the number of filters is searched from [3, 9], [3, 9], [9, 27], [9, 27], and [18, 36], respectively.”
BackgroundHe, Z., Shao, H., Zhang, X., Cheng, J., & Yang, Y. (2019) · IEEE Access · doi:10.1109/access.2019.2936243 · Cited by 113
“Artificial intelligence has attracted increasingly attention in recent years for enhancing automation monitoring and inference capabilities of industrial equipment [4].”
BackgroundDeep Ensemble Capsule Network for Intelligent Compound Fault Diagnosis Using Multisensory Data
Huang, R., Li, J., Li, W., & Cui, L. (2019) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2019.2958010 · Cited by 111
“…techniques, such as stacked auto-encoders (SAEs) [24]–[26], deep belief networks (DBNs) [27], [28], convolutional neural networks (CNNs) [29]–[31], long short-term memory recurrent networks (LSTMs) [32], capsule networks (CNs) [33], [34], deep fuzzy echo state networks (DFESNs) [35], [36],…”
BackgroundXiao, D., Huang, Y., Qin, C., Liu, Z., Li, Y., & Liu, C. (2019) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1177/0954406219840381 · Cited by 119
Deep Fuzzy Echo State Networks for Machinery Fault Diagnosis
Zhang, S., Sun, Z., Wang, M., Long, J., Bai, Y., & Li, C. (2019) · IEEE Transactions on Fuzzy Systems · doi:10.1109/tfuzz.2019.2914617 · Cited by 118
“[20] proposed dislocated time-series convolutional neural networks (CNNs) for machine 1063-6706 © 2019 IEEE.”
BackgroundSkowron, M., Orłowska-Kowalska, T., & Kowalski, C. T. (2022) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2022.3146557 · Cited by 113
Duan, A., Guo, L., Gao, H., Xiang-dong, W., & Dong, X. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2020.2998233 · Cited by 107
Bidirectional deep recurrent neural networks for process fault classification
Chadha, G. S., Panambilly, A., Schwung, A., & Ding, S. X. (2020) · ISA Transactions · doi:10.1016/j.isatra.2020.07.011 · Cited by 113
Ellefsen, A. L., Æsøy, V., Ushakov, S., & Zhang, H. (2019) · IEEE Transactions on Reliability · doi:10.1109/tr.2019.2907402 · Cited by 126
“[144] proposed a novel dislocated time-series CNN (DTS-CNN) diagnostics approach.”
BackgroundInfluence of human activity on landslide susceptibility development in the Three Gorges area
Li, Y., Wang, X., & Mao, H. (2020) · Natural Hazards · doi:10.1007/s11069-020-04264-6 · Cited by 118
“During each iteration, the gradient descent method of AdamOptimizer is employed to literally update the weight matrixes Wi (i = 1, 2,…, 6) in the CNN and to minimize the cost function J( ) .”
BackgroundInfluentialWang, H., Zhang, W., Yang, D., & Xiang, Y. (2022) · IEEE Systems Journal · doi:10.1109/jsyst.2022.3193200 · Cited by 141
“[45] designed a dislocated time-series method to”
BackgroundInfluentialHe, W., He, Y., & Li, B. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2020.2969008 · Cited by 102
“[19] developed a diagnosis framework based on a dislocated time-series convolutional neural network (CNN) achieving desirable performance.”
BackgroundA cost-sensitive convolution neural network learning for control chart pattern recognition
Fuqua, D., & Razzaghi, T. (2020) · Expert Systems with Applications · doi:10.1016/j.eswa.2020.113275 · Cited by 103
Li, Y., Zou, L., Jiang, L., & Zhou, X. (2019) · IEEE Access · doi:10.1109/access.2019.2953490 · Cited by 98
“To test the robustness of the designed method, the Gaussian white noises [45] are added to the raw vibration signals with different signal noise ratios (SNRs).”
MethodTeimourzadeh, H., Moradzadeh, A., Shoaran, M., Mohammadi‐Ivatloo, B., & Razzaghi, R. (2021) · IEEE Access · doi:10.1109/access.2021.3051411 · Cited by 103
“The pooling layer is formulated as the following form [42], [45]: where operator pooling () demonstrates the pooling stage and β is the pooling kernel.”
BackgroundMethodQian, W., Li, S., & Wang, J. (2018) · IEEE Access · doi:10.1109/access.2018.2880770 · Cited by 91
“[12] introduced CNN into fault diagnosis to deal with 1 dimension vibration signals directly.”
BackgroundWang, M., Lu, S., & Liao, R.-M. (2021) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2021.3065342 · Cited by 91
Bandyopadhyay, I., Purkait, P., & Koley, C. (2018) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2018.2854885 · Cited by 98
“These problems can be overcome by signal-based approaches whose framework includes three steps: signal acquisition, feature extraction, and fault recognition [14].”
BackgroundZhang, K., Tang, B., Yi, Q., & Deng, L. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.05.049 · Cited by 94
Ma, S., Liu, W., Cai, W., Shang, Z., & Liu, G. (2019) · IEEE Access · doi:10.1109/access.2019.2912072 · Cited by 96
“Reference [23] cut the raw signal into a square matrix by changing the interval K, which was directly used for fault detection in the 2D-CNN structure training.”
BackgroundMethodFault Diagnosis for Energy Internet Using Correlation Processing-Based Convolutional Neural Networks
Yang, D., Pang, Y., Zhou, B., & Li, K. (2019) · IEEE Transactions on Systems Man and Cybernetics Systems · doi:10.1109/tsmc.2019.2919940 · Cited by 94
“To address this challenge, Liu et al. [27] developed a novel diagnosis framework called dislocated time-series CNNs to dislocate the input signals and establish the corresponding image representation.”
BackgroundMethodYu, S., Wang, M., Pang, S., Song, L., & Qiao, S. (2022) · Measurement · doi:10.1016/j.measurement.2022.111228 · Cited by 90
Han, T., Ma, R., & Zheng, J. (2021) · Measurement · doi:10.1016/j.measurement.2021.109208 · Cited by 93
Tang, J. X., Zheng, G., Wei, C., Huang, W., & Ding, X. (2022) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2022.3169528 · Cited by 114
Xu, Z., Bashir, M. B., Zhang, W., Yang, Y., Wang, X., & Li, C. (2022) · Information Fusion · doi:10.1016/j.inffus.2022.06.005 · Cited by 92
An Explainable Convolutional Neural Network for Fault Diagnosis in Linear Motion Guide
Kim, M. S., Yun, J. P., & Park, P. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2020.3012989 · Cited by 93
Series DC Arc Fault Detection Using Machine Learning Algorithms
Dang, H.-L., Kim, J.-C., Kwak, S., & Choi, S. (2021) · IEEE Access · doi:10.1109/access.2021.3115512 · Cited by 92
“…intelligence (AI) methods have become popular and offer potential techniques in fault diagnosis in various areas such as high impedance fault detection in medium voltage networks [22], failure detection in electrical machines [23], and track circuit fault detection in railway systems [24].”
BackgroundSparse Time-Frequency Representation for Incipient Fault Diagnosis of Wind Turbine Drive Train
Yang, B., Liu, R., & Chen, X. (2018) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2018.2828739 · Cited by 84
“The most important components of the fault diagnosis system are the signal acquisition and processing methods [13].”
BackgroundSelf-citationDeep Learning-Based Domain Adaptation Method for Fault Diagnosis in Semiconductor Manufacturing
Azamfar, M., Li, X., & Lee, J. (2020) · IEEE Transactions on Semiconductor Manufacturing · doi:10.1109/tsm.2020.2995548 · Cited by 93
“[29] proposed using time series signal directly in a CNN model for electric motor fault diagnosis and using time series signal in a CNN architecture and for fault diagnosis in semiconductor manufacturing was proposed in [30].”
MethodRobust Single Accelerometer-Based Activity Recognition Using Modified Recurrence Plot
Lu, J., & Tong, K.-Y. (2019) · IEEE Sensors Journal · doi:10.1109/jsen.2019.2911204 · Cited by 79
“In addition, convolutional neural network (CNN) can operate on raw signal directly [19], [20], [21].”
BackgroundSurrogate Modeling of Electrical Machine Torque Using Artificial Neural Networks
Tahkola, M., Keränen, J., Sedov, D., Far, M. F., & Kortelainen, J. (2020) · IEEE Access · doi:10.1109/access.2020.3042834 · Cited by 86
“In [60], the authors propose a CNN-based method, called dislocated time series CNN (DTS-CNN), to classify faults from raw signals.”
MethodEnhanced bearing fault detection using multichannel, multilevel 1D CNN classifier
Ozcan, I. H., Devecioğlu, Ö. C., İnce, T., Eren, L., & Aşkar, M. (2021) · Electrical Engineering · doi:10.1007/s00202-021-01309-2 · Cited by 82
Guo, S., Yang, T., Gao, W., Zhang, C., & Zhang, Y. (2018) · Sensors · doi:10.3390/s18113857 · Cited by 74
“Dislocated Time Series Convolutional Neural Network (DTS-CNN) [18] is proposed for mechanical signals by adding a dislocate layer to CNN.”
BackgroundMethodInfluentialA three-dimensional geometric features-based SCA algorithm for compound faults diagnosis
Hao, Y., Song, L., Cui, L., & Wang, H. (2018) · Measurement · doi:10.1016/j.measurement.2018.10.098 · Cited by 73
Multiple Classifiers and Data Fusion for Robust Diagnosis of Gearbox Mixed Faults
Senanayaka, J. S. L., Khang, H. V., & Robbersmyr, K. G. (2018) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2018.2883357 · Cited by 74
A Lighted Deep Convolutional Neural Network Based Fault Diagnosis of Rotating Machinery
Ma, S., Cai, W., Liu, W., Shang, Z., & Liu, G. (2019) · Sensors · doi:10.3390/s19102381 · Cited by 74
“69 × 106 1024 × 1 × 1 Reference [27] 565.”
MethodDeep Transfer Learning Method Based on 1D‐CNN for Bearing Fault Diagnosis
He, J., Li, X., Chen, Y., Chen, D., Guo, J. M., & Zhou, Y. (2021) · Shock and Vibration · doi:10.1155/2021/6687331 · Cited by 85
“In [12], authors proposed a CNN model based on dislocation time series for fault diagnosis.”
Diagnostics and prognostics for complex systems: A review of methods and challenges
Soleimani, M., Campean, F., & Neagu, D. C. (2021) · Quality and Reliability Engineering International · doi:10.1002/qre.2947 · Cited by 85
“CNNs provide effective methods to work with raw signals directly by weight sharing and local connections without feature extractors [110].”
Method
Metadata
- Authors
- Liu, R., Meng, G., Yang, B., Sun, C., & Chen, X.
- Affiliations
- Xi'an Jiaotong University (CN)
- Venue
- IEEE Transactions on Industrial Informatics
- Published
- 2017-06
- Volume
- 13
- Issue
- 3
- Pages
- 1310-1320
- ISSN
- 1551-3203 (ISSN-L)
- 1941-0050
- OpenAlex
- W2562762876
- Semantic Scholar
- 1edc693c1c597572d540e5e87673e1b232a614fe
- Cited by
- 345
- References
- 36
- Citations by year
- 2026: 9 · 2025: 21 · 2024: 28 · 2023: 37 · 2022: 49 · 2021: 50 · 2020: 62 · 2019: 55 · 2018: 29 · 2017: 5
- FWCI
- 24.95
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Transactions on Industrial Informatics (publishedVersion)
- Funders
- National Key Basic Research Program of China (2015CB057400)
- National Natural Science Foundation of China (51225501, 51335006)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Control and Systems Engineering › Fault Detection and Control Systems
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electrical Fault Detection and Protection
- Keywords
- vibration signals, non-stationary signals, feature extraction
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.