The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
Omnidirectional Printing of Flexible, Stretchable, and Spanning Silver Microelectrodes
Abstract
Flexible, stretchable, and spanning microelectrodes that carry signals from one circuit element to another are needed for many emerging forms of electronic and optoelectronic devices. We have patterned silver microelectrodes by omnidirectional printing of concentrated nanoparticle inks in both uniform and high–aspect ratio motifs with minimum widths of approximately 2 micrometers onto semiconductor, plastic, and glass substrates. The patterned microelectrodes can withstand repeated bending and stretching to large levels of strain with minimal degradation of their electrical properties. With this approach, wire bonding to fragile three-dimensional devices and spanning interconnects for solar cell and light-emitting diode arrays are demonstrated.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Shape-Controlled Synthesis of Gold and Silver Nanoparticles
Sun, Y., & Xia, Y. (2002) · Science · doi:10.1126/science.1077229 · Cited by 6,506
The path to ubiquitous and low-cost organic electronic appliances on plastic
Forrest, S. R. (2004) · Nature · doi:10.1038/nature02498 · Cited by 5,165
High-Resolution Inkjet Printing of All-Polymer Transistor Circuits
Sirringhaus, H., Kawase, T., Friend, R. H., Shimoda, T., Inbasekaran, M., Wu, W., & Woo, E. P. (2000) · Science · doi:10.1126/science.290.5499.2123 · Cited by 3,311
A Stretchable Form of Single-Crystal Silicon for High-Performance Electronics on Rubber Substrates
Khang, D.-Y., Jiang, H., Huang, Y., & Rogers, J. A. (2006) · Science · doi:10.1126/science.1121401 · Cited by 1,689
Self-citationOuyang, J., Xu, Q., Chu, C., Yang, Y., Li, G., & Shinar, J. (2004) · Polymer · doi:10.1016/j.polymer.2004.10.001 · Cited by 1,438
Synthesis of Silver Nanostructures with Controlled Shapes and Properties
Wiley, B., Sun, Y., & Xia, Y. (2007) · Accounts of Chemical Research · doi:10.1021/ar7000974 · Cited by 1,187
Medium-scale carbon nanotube thin-film integrated circuits on flexible plastic substrates
Cao, Q., Kim, H.-S., Pimparkar, N., Kulkarni, J. P., Wang, C., Shim, M., Roy, K., Alam, M. A., & Rogers, J. A. (2008) · Nature · doi:10.1038/nature07110 · Cited by 1,136
Self-citationRogers, J. A., Bao, Z., Baldwin, K., Dodabalapur, A., Crone, B., Raju, V. R., Kuck, V., Katz, H., Amundson, K., Ewing, J., et al. (2001) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.091588098 · Cited by 1,117
Self-citationInorganic Semiconductors for Flexible Electronics
Sun, Y., & Rogers, J. A. (2007) · Advanced Materials · doi:10.1002/adma.200602223 · Cited by 874
Self-citationColloidal Inks for Directed Assembly of 3-D Periodic Structures
Smay, J. E., Cesarano, J., & Lewis, J. A. (2002) · Langmuir · doi:10.1021/la0257135 · Cited by 700
Self-citation
Cited by
Materials and Mechanics for Stretchable Electronics
Rogers, J. A., Someya, T., & Huang, Y. (2010) · Science · doi:10.1126/science.1182383 · Cited by 5,042
Self-citation25th Anniversary Article: Rational Design and Applications of Hydrogels in Regenerative Medicine
Annabi, N., Tamayol, A., Uquillas, J. A., Akbari, M., Bertassoni, L. E., Cha, C., Camci‐Unal, G., Dokmeci, M. R., Peppas, N. A., & Khademhosseini, A. (2014) · Advanced Materials · doi:10.1002/adma.201303233 · Cited by 1,409
3D Printing of Interdigitated Li‐Ion Microbattery Architectures
Sun, K., Wei, T., Ahn, B. Y., Seo, J. Y., Dillon, S. J., & Lewis, J. A. (2013) · Advanced Materials · doi:10.1002/adma.201301036 · Cited by 1,341
Self-citationDirect Ink Writing: A 3D Printing Technology for Diverse Materials
Saadi, M. A. S. R., Maguire, A., Pottackal, N. T., Thakur, M. S. H., Ikram, M. M., Hart, A. J., Ajayan, P. M., & Rahman, M. M. (2022) · Advanced Materials · doi:10.1002/adma.202108855 · Cited by 1,335
Highly Conductive and Stretchable Silver Nanowire Conductors
Xu, F., & Zhu, Y. (2012) · Advanced Materials · doi:10.1002/adma.201201886 · Cited by 1,314
Advanced Carbon for Flexible and Wearable Electronics
Wang, C., Xia, K., Wang, H., Liang, X., Yin, Z., & Zhang, Y. (2019) · Advanced Materials · doi:10.1002/adma.201801072 · Cited by 1,300
Tobjörk, D., & Österbacka, R. (2011) · Advanced Materials · doi:10.1002/adma.201004692 · Cited by 1,287
Meng, Y., Zhao, Y., Hu, C., Cheng, H., Hu, Y., Zhang, Z., Shi, G., & Qu, L. (2013) · Advanced Materials · doi:10.1002/adma.201300132 · Cited by 1,093
Fractal design concepts for stretchable electronics
Fan, J. A., Yeo, W.-H., Su, Y., Hattori, Y., Lee, W., Jung, S.-Y., Zhang, Y., Liu, Z., Cheng, H., Falgout, L., et al. (2014) · Nature Communications · doi:10.1038/ncomms4266 · Cited by 1,088
Self-citationLee, P., Lee, J., Lee, H., Yeo, J., Hong, S., Nam, K. H., Lee, D., Lee, S. S., & Ko, S. H. (2012) · Advanced Materials · doi:10.1002/adma.201200359 · Cited by 1,064
3D printing of conducting polymers
Yuk, H., Lu, B., Lin, S., Qu, K., Xu, J., Luo, J., & Zhao, X. (2020) · Nature Communications · doi:10.1038/s41467-020-15316-7 · Cited by 1,001
Multistable Architected Materials for Trapping Elastic Strain Energy
Shan, S., Kang, S. H., Raney, J. R., Wang, P., Fang, L., Candido, F., Lewis, J. A., & Bertoldi, K. (2015) · Advanced Materials · doi:10.1002/adma.201501708 · Cited by 986
Self-citationXu, S., Yan, Z., Jang, K.-I., Huang, W., Fu, H., Kim, J., Wei, Z., Flavin, M., McCracken, J., Wang, R., et al. (2015) · Science · doi:10.1126/science.1260960 · Cited by 931
Self-citation3D Printing of Free Standing Liquid Metal Microstructures
Ladd, C., So, J., Muth, J., & Dickey, M. D. (2013) · Advanced Materials · doi:10.1002/adma.201301400 · Cited by 926
Park, M., Im, J., Shin, M., Min, Y., Park, J., Cho, H., Park, S., Shim, M.-B., Jeon, S., Chung, D.-Y., et al. (2012) · Nature Nanotechnology · doi:10.1038/nnano.2012.206 · Cited by 919
Self-citationMannoor, M. S., Jiang, Z., James, T., Kong, Y. L., Malatesta, K. A., Soboyejo, W. O., Verma, N., Gracias, D. H., & McAlpine, M. C. (2013) · Nano Letters · doi:10.1021/nl4007744 · Cited by 874
Multiscale metallic metamaterials
Zheng, X., Smith, W., Jackson, J., Moran, B., Cui, H., Chen, D., Ye, J., Fang, N., Rodriguez, N., Weisgraber, T., et al. (2016) · Nature Materials · doi:10.1038/nmat4694 · Cited by 870
Flexible and Semitransparent Organic Solar Cells
Li, Y., Xu, G., Cui, C., & Li, Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701791 · Cited by 788
Extremely Elastic Wearable Carbon Nanotube Fiber Strain Sensor for Monitoring of Human Motion
Ryu, S., Lee, P., Chou, J. B., Xu, R., Zhao, R., Hart, A. J., & Kim, S.-G. (2015) · ACS Nano · doi:10.1021/acsnano.5b00599 · Cited by 770
Recent Progress in Materials and Devices toward Printable and Flexible Sensors
Rim, Y. S., Bae, S., Chen, H., De Marco, N., & Yang, Y. (2016) · Advanced Materials · doi:10.1002/adma.201505118 · Cited by 771
Lee, J., Lee, P., Lee, H., Lee, D., Lee, S. S., & Ko, S. H. (2012) · Nanoscale · doi:10.1039/c2nr31254a · Cited by 741
Nanoparticulate Functional Materials
Goesmann, H., & Feldmann, C. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.200903053 · Cited by 733
Strategies and Molecular Design Criteria for 3D Printable Hydrogels
Jungst, T., Smolan, W., Schacht, K., Scheibel, T., & Groll, J. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00303 · Cited by 712
Additive manufacturing of structural materials
Liu, G., Zhang, X., Chen, X., He, Y., Cheng, L., Huo, M., Yin, J., Hao, F., Chen, S., Wang, P., et al. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100596 · Cited by 707
Stretchable Supercapacitors Based on Buckled Single‐Walled Carbon‐Nanotube Macrofilms
Yu, C., Masarapu, C., Rong, J., Wei, B., & Jiang, H. (2009) · Advanced Materials · doi:10.1002/adma.200901775 · Cited by 683
High-efficiency robust perovskite solar cells on ultrathin flexible substrates
Li, Y., Meng, L., Yang, Y., Xu, G., Hong, Z., Chen, Q., You, J., Li, G., Yang, Y., & Li, Y. (2016) · Nature Communications · doi:10.1038/ncomms10214 · Cited by 680
Materials and Structures toward Soft Electronics
Wang, C., Wang, C., Huang, Z., & Xu, S. (2018) · Advanced Materials · doi:10.1002/adma.201801368 · Cited by 662
Writing in the granular gel medium
Bhattacharjee, T., Zehnder, S. M., Rowe, K. G., Jain, S., Nixon, R. M., Sawyer, W. G., & Angelini, T. E. (2015) · Science Advances · doi:10.1126/sciadv.1500655 · Cited by 635
Conformal Printing of Electrically Small Antennas on Three‐Dimensional Surfaces
Adams, J. J., Duoss, E. B., Malkowski, T. F., Motala, M. J., Ahn, B. Y., Nuzzo, R. G., Bernhard, J. T., & Lewis, J. A. (2011) · Advanced Materials · doi:10.1002/adma.201003734 · Cited by 630
Self-citationPrinting, folding and assembly methods for forming 3D mesostructures in advanced materials
Zhang, Y., Zhang, F., Yan, Z., Ma, Q., Li, X., Huang, Y., & Rogers, J. A. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.19 · Cited by 620
Self-citationRecent Progress in Additive Manufacturing of Fiber Reinforced Polymer Composite
Goh, G. D., Yap, Y. L., Agarwala, S., & Yeong, W. Y. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800271 · Cited by 621
Integrated 3D-printed reactionware for chemical synthesis and analysis
Symes, M. D., Kitson, P. J., Yan, J., Richmond, C. J., Cooper, G. J. T., Bowman, R. W., Vilbrandt, T., & Cronin, L. (2012) · Nature Chemistry · doi:10.1038/nchem.1313 · Cited by 617
Nanoporous polyethylene microfibres for large-scale radiative cooling fabric
Peng, Y., Chen, J., Song, A. Y., Catrysse, P. B., Hsu, P.-C., Cai, L., Liu, B., Zhu, Y., Zhou, G., Wu, D. S., et al. (2018) · Nature Sustainability · doi:10.1038/s41893-018-0023-2 · Cited by 617
Stretchable and self-healing polymers and devices for electronic skin
Benight, S. J., Wang, C., Tok, J. B. H., & Bao, Z. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.08.001 · Cited by 617
Ag Nanowire Reinforced Highly Stretchable Conductive Fibers for Wearable Electronics
Lee, S., Shin, S., Lee, S., Seo, J., Lee, J., Son, S., Cho, H. J., Algadi, H., Al‐Sayari, S., Kim, D. E., et al. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201500628 · Cited by 605
Farahani, R. D., Dubé, M., & Therriault, D. (2016) · Advanced Materials · doi:10.1002/adma.201506215 · Cited by 604
Mechanisms, Capabilities, and Applications of High‐Resolution Electrohydrodynamic Jet Printing
Onses, M. S., Sutanto, E., Ferreira, P. M., Alleyne, A. G., & Rogers, J. A. (2015) · Small · doi:10.1002/smll.201500593 · Cited by 603
Self-citationBioadhesive ultrasound for long-term continuous imaging of diverse organs
Wang, C., Chen, X., Wang, L., Makihata, M., Liu, H.-C., Zhou, T., & Zhao, X. (2022) · Science · doi:10.1126/science.abo2542 · Cited by 599
Choi, S., Han, S. I., Kim, D., Hyeon, T., & Kim, D.-H. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00706c · Cited by 591
Active printed materials for complex self-evolving deformations
Raviv, D., Zhao, W., McKnelly, C., Papadopoulou, A., Kadambi, A., Shi, B., Hirsch, S., Dikovsky, D., Zyracki, M., Olguin, C., et al. (2014) · Scientific Reports · doi:10.1038/srep07422 · Cited by 568
Topology Optimized Architectures with Programmable Poisson's Ratio over Large Deformations
Clausen, A., Wang, F., Jensen, J. S., Sigmund, O., & Lewis, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201502485 · Cited by 551
Self-citationEmerging flexible and wearable physical sensing platforms for healthcare and biomedical applications
Kenry, Yeo, J. C., & Lim, C. T. (2016) · Microsystems & Nanoengineering · doi:10.1038/micronano.2016.43 · Cited by 550
Direct Writing of Gallium‐Indium Alloy for Stretchable Electronics
Boley, J. W., White, E. L., Chiu, G. T. ‐., & Kramer, R. K. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201303220 · Cited by 546
A mechanically driven form of Kirigami as a route to 3D mesostructures in micro/nanomembranes
Zhang, Y., Yan, Z., Nan, K., Xiao, D., Liu, Y., Luan, H., Fu, H., Wang, X., Yang, Q., Wang, J., et al. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1515602112 · Cited by 535
Self-citationLiang, J., Tong, K., & Pei, Q. (2016) · Advanced Materials · doi:10.1002/adma.201600772 · Cited by 535
Facilitated Ion Transport in All-Solid-State Flexible Supercapacitors
Choi, B. G., Hong, J., Hong, W. H., Hammond, P. T., & Park, H. (2011) · ACS Nano · doi:10.1021/nn202020w · Cited by 485
Configurable 3D-Printed millifluidic and microfluidic ‘lab on a chip’ reactionware devices
Kitson, P. J., Rosnes, M. H., Sans, V., Dragone, V., & Cronin, L. (2012) · Lab on a Chip · doi:10.1039/c2lc40761b · Cited by 484
3D Printed Photoresponsive Devices Based on Shape Memory Composites
Yang, H., Leow, W. R., Wang, T., Wang, J., Yu, J., He, K., Qi, D., Wan, C., & Chen, X. (2017) · Advanced Materials · doi:10.1002/adma.201701627 · Cited by 483
Highly Stretchable and Self-Healable Supercapacitor with Reduced Graphene Oxide Based Fiber Springs
Wang, S., Liu, N., Su, J., Li, L., Long, F., Zou, Z., Jiang, X., & Gao, Y. (2017) · ACS Nano · doi:10.1021/acsnano.6b08262 · Cited by 482
Huang, Q., & Zhu, Y. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800546 · Cited by 482
Conductive nanomaterials for 2D and 3D printed flexible electronics
Kamyshny, A., & Magdassi, S. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00738a · Cited by 469
Additive manufacturing (AM) and nanotechnology: promises and challenges
Ivanova, O., Williams, C., & Campbell, T. (2013) · Rapid Prototyping Journal · doi:10.1108/rpj-12-2011-0127 · Cited by 461
Low-Cost Inorganic Solar Cells: From Ink To Printed Device
Habas, S. E., Platt, H. A. S., van Hest, M. F. A. M., & Ginley, D. S. (2010) · Chemical Reviews · doi:10.1021/cr100191d · Cited by 459
Reactive Silver Inks for Patterning High-Conductivity Features at Mild Temperatures
Walker, S. B., & Lewis, J. A. (2012) · Journal of the American Chemical Society · doi:10.1021/ja209267c · Cited by 459
Self-citationAdvanced Materials for Printed Wearable Electrochemical Devices: A Review
Kim, J., Kumar, R., Bandodkar, A. J., & Wang, J. (2017) · Advanced Electronic Materials · doi:10.1002/aelm.201600260 · Cited by 452
3D Printed Stretchable Tactile Sensors
Guo, S., Qiu, K., Meng, F., Park, S. H., & McAlpine, M. C. (2017) · Advanced Materials · doi:10.1002/adma.201701218 · Cited by 445
Self-citation3D Printed Quantum Dot Light-Emitting Diodes
Kong, Y. L., Tamargo, I. A., Kim, H., Johnson, B. N., Gupta, M. K., Koh, T.-W., Chin, H.-A., Steingart, D. A., Rand, B. P., & McAlpine, M. C. (2014) · Nano Letters · doi:10.1021/nl5033292 · Cited by 432
Metal-based Inkjet Inks for Printed Electronics
Kamyshny, A. (2011) · The Open Applied Physics Journal · doi:10.2174/1874183501104010019 · Cited by 424
Additive manufacturing of biologically-inspired materials
Studart, A. R. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00836k · Cited by 415
Harris, K. D., Elias, A. L., & Chung, H.-J. (2016) · Journal of Materials Science · doi:10.1007/s10853-015-9643-3 · Cited by 403
Additive Manufacturing of Metal Structures at the Micrometer Scale
Hirt, L., Reiser, A., Spolenak, R., & Zambelli, T. (2017) · Advanced Materials · doi:10.1002/adma.201604211 · Cited by 400
Learning human–environment interactions using conformal tactile textiles
Luo, Y., Li, Y., Sharma, P., Shou, W., Wu, K., Foshey, M., Li, B., Palacios, T., Torralba, A., & Matusik, W. (2021) · Nature Electronics · doi:10.1038/s41928-021-00558-0 · Cited by 395
Yao, B., Hong, W., Chen, T., Han, Z., Xu, X., Hu, R., Hao, J., Li, C., Li, H., Perini, S. E., et al. (2020) · Advanced Materials · doi:10.1002/adma.201907499 · Cited by 398
Stable propagation of mechanical signals in soft media using stored elastic energy
Raney, J. R., Nadkarni, N., Daraio, C., Kochmann, D. M., Lewis, J. A., & Bertoldi, K. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1604838113 · Cited by 397
Self-citationMaterials and Structures for Stretchable Energy Storage and Conversion Devices
Xie, K., & Wei, B. (2014) · Advanced Materials · doi:10.1002/adma.201305919 · Cited by 396
Zhang, Y., Bai, W., Cheng, X., Ren, J., Weng, W., Chen, P., Fang, X., Zhang, Z., & Peng, H. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201409366 · Cited by 394
Stretchable, elastic materials and devices for solar energy conversion
Lipomi, D. J., & Bao, Z. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01881g · Cited by 392
A New 3D Printing Strategy by Harnessing Deformation, Instability, and Fracture of Viscoelastic Inks
Yuk, H., & Zhao, X. (2018) · Advanced Materials · doi:10.1002/adma.201704028 · Cited by 381
Flexible organic photovoltaics based on water-processed silver nanowire electrodes
Sun, Y., Chang, M., Meng, L., Wan, X., Gao, H., Zhang, Y., Zhao, K., Sun, Z., Li, C., Liu, S., et al. (2019) · Nature Electronics · doi:10.1038/s41928-019-0315-1 · Cited by 380
High-resolution, reconfigurable printing of liquid metals with three-dimensional structures
Park, Y.-G., An, H. S., Kim, J.-Y., & Park, J.-U. (2019) · Science Advances · doi:10.1126/sciadv.aaw2844 · Cited by 367
Fu, Q., Saiz, E., & Tomsia, A. P. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.06.030 · Cited by 366
Seoane-Viaño, I., Januskaite, P., Alvarez-Lorenzo, C., Basit, A. W., & Goyanes, A. (2021) · Journal of Controlled Release · doi:10.1016/j.jconrel.2021.02.027 · Cited by 357
3D-printing and advanced manufacturing for electronics
Espera, A. H., Dizon, J. R. C., Chen, Q., & Advincula, R. C. (2019) · Progress in Additive Manufacturing · doi:10.1007/s40964-019-00077-7 · Cited by 356
Zhu, Z., Ng, D. W. H., Park, H. S., & McAlpine, M. C. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-00235-2 · Cited by 348
Stretchable electronics: functional materials, fabrication strategies and applications
Wu, W. (2019) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2018.1549460 · Cited by 347
Xu, Y., Zhang, Y., Guo, Z., Ren, J., Wang, Y., & Peng, H. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201508848 · Cited by 343
Microfluidic Printheads for Multimaterial 3D Printing of Viscoelastic Inks
Hardin, J. O., Ober, T. J., Valentine, A. D., & Lewis, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201500222 · Cited by 340
Self-citation3D printing electronic components and circuits with conductive thermoplastic filament
Flowers, P. F., Reyes, C., Ye, S., Kim, M. J., & Wiley, B. J. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.10.002 · Cited by 333
A Strain‐Insensitive Stretchable Electronic Conductor: PEDOT:PSS/Acrylamide Organogels
Lee, Y., Kang, H., Gwon, S. H., Choi, G. M., Lim, S., Sun, J., & Joo, Y. (2016) · Advanced Materials · doi:10.1002/adma.201504606 · Cited by 332
Electrically conductive filament for 3D-printed circuits and sensors
Kwok, S. W., Goh, K. H. H., Tan, Z. D., Tan, S. T. M., Tjiu, W. W., Soh, J. Y., Ng, Z. J. G., Chan, Y. Z., Hui, H. K., & Goh, K. E. J. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2017.07.001 · Cited by 332
Conductive Inks with a “Built-In” Mechanism That Enables Sintering at Room Temperature
Grouchko, M., Kamyshny, A., Mihailescu, C. F., Anghel, D. F., & Magdassi, S. (2011) · ACS Nano · doi:10.1021/nn2005848 · Cited by 331
Sun, J., Huang, Y., Fu, C., Wang, Z., Huang, Y., Zhu, M., Zhi, C., & Hu, H. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.07.008 · Cited by 331
“2D or not 2D”: Shape-programming polymer sheets
Liu, Y., Genzer, J., & Dickey, M. D. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2015.09.001 · Cited by 329
Additive manufacturing of multi-directional preforms for composites: opportunities and challenges
Quan, Z., Wu, A., Keefe, M., Qin, X., Yu, J., Suhr, J., Byun, J.-H., Kim, B.-S., & Chou, T.-W. (2015) · Materials Today · doi:10.1016/j.mattod.2015.05.001 · Cited by 324
Laser-assisted direct ink writing of planar and 3D metal architectures
Skylar-Scott, M. A., Gunasekaran, S., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1525131113 · Cited by 318
Self-citationThree‐Dimensional Printing of Elastomeric, Cellular Architectures with Negative Stiffness
Duoss, E. B., Weisgraber, T. H., Hearon, K., Zhu, C., Small, W., Metz, T. R., Vericella, J. J., Barth, H. D., Kuntz, J. D., Maxwell, R. S., et al. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400451 · Cited by 316
Self-citationLiquid crystal elastomers: an introduction and review of emerging technologies
Ula, S. W., Traugutt, N. A., Volpe, R. H., Patel, R. R., Yu, K., & Yakacki, C. M. (2018) · Liquid Crystals Reviews · doi:10.1080/21680396.2018.1530155 · Cited by 316
Recent advances in flexible organic light-emitting diodes
Xu, R.-P., Li, Y.-Q., & Tang, J.-X. (2016) · Journal of Materials Chemistry C · doi:10.1039/c6tc03230c · Cited by 307
Chemical formation of soft metal electrodes for flexible and wearable electronics
Wang, D., Zhang, Y., Lu, X., Ma, Z., Xie, C., & Zheng, Z. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00192d · Cited by 307
Active mixing of complex fluids at the microscale
Ober, T. J., Foresti, D., & Lewis, J. A. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1509224112 · Cited by 306
Self-citationAn, B. W., Kim, K., Lee, H., Kim, S., Shim, Y., Lee, D., Song, J. Y., & Park, J. (2015) · Advanced Materials · doi:10.1002/adma.201502092 · Cited by 306
Rotational 3D printing of damage-tolerant composites with programmable mechanics
Raney, J. R., Compton, B. G., Mueller, J., Ober, T. J., Shea, K., & Lewis, J. A. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1715157115 · Cited by 301
Self-citationRuiz-Morales, J. C., Tarancón, A., Canales-Vázquez, J., Méndez-Ramos, J., Hernández-Afonso, L., Acosta-Mora, P., Marín Rueda, J. R., & Fernández-González, R. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03526d · Cited by 299
Conducting Polymer Dough for Deformable Electronics
Oh, J. Y., Kim, S., Baik, H., & Jeong, U. (2016) · Advanced Materials · doi:10.1002/adma.201502947 · Cited by 297
Zhang, Y., Bai, W., Cheng, X., Ren, J., Weng, W., Chen, P., Fang, X., Zhang, Z., & Peng, H. (2014) · Angewandte Chemie · doi:10.1002/ange.201409366 · Cited by 296
Design of conductive composite elastomers for stretchable electronics
Park, M., Park, J., & Jeong, U. (2014) · Nano Today · doi:10.1016/j.nantod.2014.04.009 · Cited by 295
Recent Advances in Stretchable and Transparent Electronic Materials
McCoul, D., Hu, W., Gao, M., Mehta, V., & Pei, Q. (2016) · Advanced Electronic Materials · doi:10.1002/aelm.201500407 · Cited by 293
Additive Manufacturing: Unlocking the Evolution of Energy Materials
Zhakeyev, A., Wang, P., Zhang, L., Shu, W., Wang, H., & Xuan, J. (2017) · Advanced Science · doi:10.1002/advs.201700187 · Cited by 291
Shen, W., Zhang, X., Huang, Q., Xu, Q., & Song, W. (2014) · Nanoscale · doi:10.1039/c3nr05479a · Cited by 288
3D-printed microelectronics for integrated circuitry and passive wireless sensors
Wu, S.-Y., Yang, C., Hsu, W., & Lin, L. (2015) · Microsystems & Nanoengineering · doi:10.1038/micronano.2015.13 · Cited by 285
Metadata
- Authors
- Ahn, B. Y., Duoss, E. B., Motala, M. J., Guo, X., Park, S.-I., Xiong, Y., Yoon, J., Nuzzo, R. G., Rogers, J. A., & Lewis, J. A.
- Venue
- Science
- Published
- 2009-03-20
- Volume
- 323
- Issue
- 5921
- Pages
- 1590-1593
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W2124282138
- Cited by
- 1,191
- References
- 22
- FWCI
- 43.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.