The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Printing meets lithography: Soft approaches to high-resolution patterning
Open accessAbstract
We are developing a high-resolution printing technique based on transferring a pattern from an elastomeric stamp to a solid substrate by conformal contact. This is an attempt to enhance the accuracy of classical printing to a precision comparable with optical lithography, creating a low-cost, large-area, high-resolution patterning process. First, we introduce the components of this technique, called soft lithography, and review its evolution. Topics described in detail are the stamp material, stamp architecture, pattern design rules, and printing tools. The accuracy of the prints made by thin patterned elastomeric layers supported on a stiff and flexible backplane is then assessed, and defects are characterized using a new electrical metrology approach. This is followed by a discussion of various printing processes used in our laboratory: 1) thiol printing for high-resolution patterns of noble metals that may also be used as sacrificial masks; 2) confined contact processing with liquids in cavities or cha nnels to chemically convert a substrate or deposit layers of materials or biomolecules; 3) printing of catalysts to mediate patterned deposition of metals; and 4) structured, light-guiding stamps for transferring high-resolution patterns into photoresists. Finally, we compare classical and high-resolution printing approaches, and describe their potential for emerging micro- and nano-scale patterning technologies.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Monolithic Microfabricated Valves and Pumps by Multilayer Soft Lithography
Unger, M. A., Chou, H.-P., Thorsen, T., Scherer, A., & Quake, S. R. (2000) · Science · doi:10.1126/science.288.5463.113 · Cited by 4,010
Imprint of sub-25 nm vias and trenches in polymers
Chou, S. Y., Krauss, P. R., & Renstrom, P. J. (1995) · Applied Physics Letters · doi:10.1063/1.114851 · Cited by 2,706
Imprint Lithography with 25-Nanometer Resolution
Chou, S. Y., Krauss, P. R., & Renstrom, P. J. (1996) · Science · doi:10.1126/science.272.5258.85 · Cited by 2,277
Kumar, A., & Whitesides, G. M. (1993) · Applied Physics Letters · doi:10.1063/1.110628 · Cited by 1,605
Selection of peptides with semiconductor binding specificity for directed nanocrystal assembly
Whaley, S. R., English, D. S., Hu, E. L., Barbara, P. F., & Belcher, A. M. (2000) · Nature · doi:10.1038/35015043 · Cited by 1,290
Chemical Amplification: Continuous-Flow PCR on a Chip
Kopp, M. U., Mello, A. J. D., & Manz, A. (1998) · Science · doi:10.1126/science.280.5366.1046 · Cited by 1,212
Polymer microstructures formed by moulding in capillaries
Kim, E., Xia, Y., & Whitesides, G. M. (1995) · Nature · doi:10.1038/376581a0 · Cited by 878
Patterned Delivery of Immunoglobulins to Surfaces Using Microfluidic Networks
Delamarche, E., Bernard, A., Schmid, H., Michel, B., & Biebuyck, H. (1997) · Science · doi:10.1126/science.276.5313.779 · Cited by 678
Self-citationSiloxane Polymers for High-Resolution, High-Accuracy Soft Lithography
Schmid, H., & Michel, B. (2000) · Macromolecules · doi:10.1021/ma982034l · Cited by 673
Self-citationMicrocontact Printing of Proteins
Bernard, A., Renault, J. P., Michel, B., Bosshard, H. R., & Delamarche, E. (2000) · Advanced Materials · doi:10.1002/1521-4095(200007)12:14<1067::aid-adma1067>3.0.co;2-m · Cited by 573
Self-citationImmobilized Affinity Ligand Techniques
Hermanson, G. T., Mallia, A. K., & Smith, P. K. (1992) · Medical Entomology and Zoology · Cited by 541
Bernard, A., Delamarche, E., Schmid, H., Michel, B., Bosshard, H. R., & Biebuyck, H. (1998) · Langmuir · doi:10.1021/la980037l · Cited by 518
Self-citationMicrofluidic Diffusion-Based Separation and Detection
Weigl, B. H., & Yager, P. (1999) · Science · doi:10.1126/science.283.5400.346 · Cited by 502
Microfluidic Networks for Chemical Patterning of Substrates: Design and Application to Bioassays
Delamarche, E., Bernard, A., Schmid, H., Bietsch, A., Michel, B., & Biebuyck, H. (1998) · Journal of the American Chemical Society · doi:10.1021/ja973071f · Cited by 412
Self-citationPatterned Self-Assembled Monolayers and Meso-Scale Phenomena
Kumar, A., Abbott, N. L., Biebuyck, H. A., Kim, E., & Whitesides, G. M. (1995) · Accounts of Chemical Research · doi:10.1021/ar00053a003 · Cited by 400
Submicrometer Patterning of Charge in Thin-Film Electrets
Jacobs, H. O., & Whitesides, G. M. (2001) · Science · doi:10.1126/science.1057061 · Cited by 374
Fabrication of three‐dimensional micro‐structures: Microtransfer molding
Zhao, X., Xia, Y., & Whitesides, G. M. (1996) · Advanced Materials · doi:10.1002/adma.19960081016 · Cited by 361
Stability of molded polydimethylsiloxane microstructures
Delamarche, E., Schmid, H., Michel, B., & Biebuyck, H. (1997) · Advanced Materials · doi:10.1002/adma.19970090914 · Cited by 360
Self-citationShah, R. R., Merreceyes, D., Husemann, M., Rees, I., Abbott, N. L., Hawker, C. J., & Hedrick, J. L. (2000) · Macromolecules · doi:10.1021/ma991264c · Cited by 358
Handbook of print media: technologies and production methods
(2002) · Choice Reviews Online · doi:10.5860/choice.39-3175 · Cited by 355
Microfabricated elastomeric stencils for micropatterning cell cultures
Folch, A., Jo, B.-H., Hurtado, O., Beebe, D. J., & Toner, M. (2000) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(200011)52:2<346::aid-jbm14>3.0.co;2-h · Cited by 354
Microfabrication through Electrostatic Self-Assembly
Tien, J., Terfort, A., & Whitesides, G. M. (1997) · Langmuir · doi:10.1021/la970454i · Cited by 333
Jackman, R. J., Duffy, D. C., Ostuni, E., Willmore, N. D., & Whitesides, G. M. (1998) · Analytical Chemistry · doi:10.1021/ac971295a · Cited by 304
Patterned Protein Layers on Solid Substrates by Thin Stamp Microcontact Printing
James, C. D., Davis, R. C., Kam, L., Craighead, H. G., Isaacson, M., Turner, J. N., & Shain, W. (1998) · Langmuir · doi:10.1021/la9710482 · Cited by 293
Electromagnetic scattering in polarizable backgrounds
Martin, O. J. F., & Piller, N. B. (1998) · Physical Review E · doi:10.1103/physreve.58.3909 · Cited by 279
Conformal contact and pattern stability of stamps used for soft lithography
Bietsch, A., & Michel, B. (2000) · Journal of Applied Physics · doi:10.1063/1.1289816 · Cited by 269
Self-citationDirected Growth of Free-StandingSingle-Walled Carbon Nanotubes
Cassell, A. M., Franklin, N. R., Tombler, T. W., Chan, E. M., Han, J., & Dai, H. (1999) · Journal of the American Chemical Society · doi:10.1021/ja992083t · Cited by 249
Lithographically induced self-construction of polymer microstructures for resistless patterning
Chou, S. Y., Zhuang, L., & Guo, L. (1999) · Applied Physics Letters · doi:10.1063/1.124579 · Cited by 212
James, C. D., Davis, R., Meyer, M., Turner, A., Turner, S., Withers, G., Kam, L., Banker, G., Craighead, H., Issacson, M., et al. (2000) · IEEE Transactions on Biomedical Engineering · doi:10.1109/10.817614 · Cited by 199
Patterned Films of Nanotubes Using Microcontact Printing of Catalysts
Kind, H., Bonard, J.-M., Emmenegger, C., Nilsson, L.-O., Hernadi, K., Maillard-Schaller, E., Schlapbach, L., Forró, L., & Kern, K. (1999) · Advanced Materials · doi:10.1002/(sici)1521-4095(199910)11:15<1285::aid-adma1285>3.0.co;2-j · Cited by 195
Self-citationContact-Inking Stamps for Microcontact Printing of Alkanethiols on Gold
Libioulle, L., Bietsch, A., Schmid, H., Michel, B., & Delamarche, E. (1999) · Langmuir · doi:10.1021/la980978y · Cited by 174
Self-citationTate, J. L., Rogers, J. A., Jones, C. D. W., et al. (2000) · Langmuir · doi:10.1021/la991646b · Cited by 157
Jeon, N. L., Choi, I. S., Whitesides, G. M., Kim, N. Y., Laibinis, P. E., Harada, Y., Finnie, K. R., Girolami, G. S., & Nuzzo, R. G. (1999) · Applied Physics Letters · doi:10.1063/1.125582 · Cited by 143
Deng, T., Wu, H., Brittain, S. T., & Whitesides, G. M. (2000) · Analytical Chemistry · doi:10.1021/ac991343m · Cited by 129
Rogers, J. A., Paul, K. E., Jackman, R. J., & Whitesides, G. M. (1998) · Journal of Vacuum Science & Technology B Microelectronics and Nanometer Structures Processing Measurement and Phenomena · doi:10.1116/1.589836 · Cited by 119
Light-coupling masks for lensless, sub-wavelength optical lithography
Schmid, H., Biebuyck, H. A., Michel, B., & Martin, O. J. F. (1998) · Applied Physics Letters · doi:10.1063/1.121362 · Cited by 104
Self-citationPrinting Gel-like Catalysts for the Directed Growth of Multiwall Carbon Nanotubes
Kind, H., Bonard, J., Forró, L., et al. (2000) · Langmuir · doi:10.1021/la0001880 · Cited by 78
Self-citationKind, H., Geißler, M., Schmid, H., et al. (2000) · Langmuir · doi:10.1021/la991584p · Cited by 74
Self-citationThree-Dimensional Metallic Microstructures Fabricated by Soft Lithography and Microelectrodeposition
Jackman, R. J., Brittain, S. T., Adams, A. W., Wu, H., Prentiss, M. G., Whitesides, S. H., & Whitesides, G. M. (1999) · Langmuir · doi:10.1021/la980857y · Cited by 56
Fabrication of Silicon MOSFETs Using Soft Lithography
Jeon, N. L., Hu, J., Whitesides, G. M., et al. (1998) · Advanced Materials · doi:10.1002/(sici)1521-4095(199812)10:17<1466::aid-adma1466>3.0.co;2-5 · Cited by 54
Plastic electronics and future trends in microelectronics
Xu, J. M. (2000) · Synthetic Metals · doi:10.1016/s0379-6779(00)00291-5 · Cited by 53
Making Honeycomb Microcomposites by Soft Lithography
Xu, B., Arias, F., & Whitesides, G. M. (1999) · Advanced Materials · Cited by 47
Tri-layer systems for nanoimprint lithography with an improved process latitude
Lebib, A., Chen, Y., Carcenac, F., Cambril, E., Manin, L., Couraud, L., & Launois, H. (2000) · Microelectronic Engineering · doi:10.1016/s0167-9317(00)00290-2 · Cited by 43
Synthesis of Geometrically Well Defined, Molecularly Thin Polymer Films
Huck, W. T. S., Stroock, A. D., & Whitesides, G. M. (2000) · Angewandte Chemie · Cited by 27
Cited by
Self-Assembled Monolayers of Thiolates on Metals as a Form of Nanotechnology
Love, J. C., Estroff, L. A., Kriebel, J. K., Nuzzo, R. G., & Whitesides, G. M. (2005) · Chemical Reviews · doi:10.1021/cr0300789 · Cited by 8,282
Technologies for Printing Sensors and Electronics Over Large Flexible Substrates: A Review
Khan, S., Lorenzelli, L., & Dahiya, R. S. (2015) · IEEE Sensors Journal · doi:10.1109/jsen.2014.2375203 · Cited by 1,225
Biswas, A., Bayer, I. S., Biris, A. S., Wang, T., Dervishi, E., & Faupel, F. (2012) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2011.11.001 · Cited by 909
Patterning self-assembled monolayers
Smith, R. K., Lewis, P. A., & Weiss, P. S. (2004) · Progress in Surface Science · doi:10.1016/j.progsurf.2003.12.001 · Cited by 807
Nanoimprint lithography: An old story in modern times? A review
Schift, H. (2008) · Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena · doi:10.1116/1.2890972 · Cited by 726
Metadata
- Authors
- Michel, B., Bernard, A., Bietsch, A., Delamarche, E., Geissler, M., Juncker, D., Kind, H., Renault, J.-P., Rothuizen, H., Schmid, H., Schmidt-Winkel, P., Stutz, R., & Wolf, H.
- Venue
- IBM Journal of Research and Development
- Publisher
- IBM
- Published
- 2001-09
- Volume
- 45
- Issue
- 5
- Pages
- 697-719
- ISSN
- 0018-8646 (ISSN-L)
- OpenAlex
- W1980590573
- Cited by
- 471
- References
- 44
- FWCI
- 29.27
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.