The DOI matches its Crossref record.
Factors Which Limit the Cycle Life of Rechargeable Lithium (Metal) Batteries
Open accessAbstract
Failure mechanisms due to high charging rates of rechargeable lithium batteries comprised of Li metal anodes, cathodes (tunneled structure), and electrolyte solutions based on the combination of 1,3‐dioxolane (DN), , and tributylamine (antipolymerization stabilizer) were explored with the aid of postmortem analysis. It was found that at high charging rates, lithium deposition produces small grains, which are too reactive toward the electrolyte solution, in spite of the excellent passivation of lithium in this solution. In practical batteries such as AA cells with spirally wound configurations, the amount of solution is relatively small, and the solution is spread throughout the battery in a thin layer. Therefore, upon cycling, the Li‐solution reactions deplete the amount of the solution below a critical value, so that only part of the active materials continues to function. This leads to a pronounced increase in the internal resistance of these batteries, which fail as a result of their high impedance and the decrease in the effective working electrodes area. Another failure mechanism relates to the extremely high charge‐discharge current densities developed as the active electrode area decreases. These high currents, developed after prolonged cycling, lead to the formation of dendrites that short‐circuit the battery, thus terminating its life. © 2000 The Electrochemical Society. All rights reserved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Nonaqueous Liquid Electrolytes for Lithium-Based Rechargeable Batteries
Xu, K. (2004) · Chemical Reviews · doi:10.1021/cr030203g · Cited by 7,437
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Promise and reality of post-lithium-ion batteries with high energy densities
Choi, J. W., & Aurbach, D. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.13 · Cited by 5,110
Self-citationLithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
Interconnected hollow carbon nanospheres for stable lithium metal anodes
Zheng, G., Lee, S. W., Liang, Z., Lee, H.-W., Yan, K., Yao, H., Wang, H., Li, W., Chu, S., & Cui, Y. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.152 · Cited by 1,764
Tian, Y., Zeng, G., Rutt, A., Shi, T., Kim, H., Wang, J., Koettgen, J., Sun, Y., Ouyang, B., Chen, T., et al. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00767 · Cited by 1,614
Transition of lithium growth mechanisms in liquid electrolytes
Bai, P., Li, J., Brushett, F. R., & Bazant, M. Z. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01674j · Cited by 1,591
Zhang, R., Chen, X., Chen, X., Cheng, X., Zhang, X., Yan, C., & Zhang, Q. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201702099 · Cited by 1,225
Reviving Lithium‐Metal Anodes for Next‐Generation High‐Energy Batteries
Guo, Y., Li, H., & Zhai, T. (2017) · Advanced Materials · doi:10.1002/adma.201700007 · Cited by 1,215
High‐Energy Lithium‐Ion Batteries: Recent Progress and a Promising Future in Applications
Xu, J., Cai, X., Cai, S., Shao, Y., Hu, C., Lu, S., & Ding, S. (2023) · ENERGY & ENVIRONMENTAL MATERIALS · doi:10.1002/eem2.12450 · Cited by 1,201
Electrode–Electrolyte Interface in Li-Ion Batteries: Current Understanding and New Insights
Gauthier, M., Carney, T. J., Grimaud, A., Giordano, L., Pour, N., Chang, H.-H., Fenning, D. P., Lux, S. F., Paschos, O., Bauer, C., et al. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b01727 · Cited by 1,028
Metallic anodes for next generation secondary batteries
Kim, H., Jeong, G., Kim, Y.-U., Kim, J.-H., Park, C.-M., & Sohn, H.-J. (2013) · Chemical Society Reviews · doi:10.1039/c3cs60177c · Cited by 1,010
Dead lithium: mass transport effects on voltage, capacity, and failure of lithium metal anodes
Chen, K.-H., Wood, K. N., Kazyak, E., LePage, W. S., Davis, A. L., Sanchez, A. J., & Dasgupta, N. P. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00371d · Cited by 1,007
Weber, R., Genovese, M., Louli, A. J., Hames, S., Martin, C., Hill, I. G., & Dahn, J. R. (2019) · Nature Energy · doi:10.1038/s41560-019-0428-9 · Cited by 948
A review of lithium deposition in lithium-ion and lithium metal secondary batteries
Li, Z., Huang, J., Yann Liaw, B., Metzler, V., & Zhang, J. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.12.099 · Cited by 938
Protected Lithium‐Metal Anodes in Batteries: From Liquid to Solid
Yang, C., Fu, K., Zhang, Y., Hitz, E., & Hu, L. (2017) · Advanced Materials · doi:10.1002/adma.201701169 · Cited by 757
Failure Mechanism for Fast‐Charged Lithium Metal Batteries with Liquid Electrolytes
Lu, D., Shao, Y., Lozano, T., Bennett, W. D., Graff, G. L., Polzin, B., Zhang, J., Engelhard, M. H., Saenz, N. T., Henderson, W. A., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201400993 · Cited by 740
Darling, R. M., Gallagher, K. G., Kowalski, J. A., Ha, S., & Brushett, F. R. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee02158d · Cited by 727
Zhang, Q., Cao, D., Ma, Y., Natan, A., Aurora, P., & Zhu, H. (2019) · Advanced Materials · doi:10.1002/adma.201901131 · Cited by 709
Kondrakov, A. O., Schmidt, A., Xu, J., Geßwein, H., Mönig, R., Hartmann, P., Sommer, H., Brezesinski, T., & Janek, J. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b12885 · Cited by 701
A review on energy chemistry of fast-charging anodes
Cai, W., Yao, Y.-X., Zhu, G.-L., Yan, C., Jiang, L.-L., He, C., Huang, J.-Q., & Zhang, Q. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00728h · Cited by 662
Ether-based electrolytes for sodium ion batteries
Li, Y., Wu, F., Li, Y., Liu, M., Feng, X., Bai, Y., & Wu, C. (2022) · Chemical Society Reviews · doi:10.1039/d1cs00948f · Cited by 597
Zhu, B., Jin, Y., Hu, X., Zheng, Q., Zhang, S., Wang, Q., & Zhu, J. (2017) · Advanced Materials · doi:10.1002/adma.201603755 · Cited by 587
Making Li‐Air Batteries Rechargeable: Material Challenges
Shao, Y., Ding, F., Xiao, J., Zhang, J., Xu, W., Park, S., Zhang, J., Wang, Y., & Liu, J. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200688 · Cited by 541
Polymer Nanofiber-Guided Uniform Lithium Deposition for Battery Electrodes
Liang, Z., Zheng, G., Liu, C., Liu, N., Li, W., Yan, K., Yao, H., Hsu, P.-C., Chu, S., & Cui, Y. (2015) · Nano Letters · doi:10.1021/nl5046318 · Cited by 540
Anodes for Rechargeable Lithium‐Sulfur Batteries
Cao, R., Xu, W., Lv, D., Xiao, J., & Zhang, J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402273 · Cited by 502
Understanding undesirable anode lithium plating issues in lithium-ion batteries
Liu, Q., Du, C., Shen, B., Zuo, P., Cheng, X., Ma, Y., Yin, G., & Gao, Y. (2016) · RSC Advances · doi:10.1039/c6ra19482f · Cited by 473
Making Li-metal electrodes rechargeable by controlling the dendrite growth direction
Liu, Y., Liu, Q., Xin, L., Liu, Y., Yang, F., Stach, E. A., & Xie, J. (2017) · Nature Energy · doi:10.1038/nenergy.2017.83 · Cited by 464
Markevich, E., Salitra, G., Chesneau, F., Schmidt, M., & Aurbach, D. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00300 · Cited by 453
Self-citationDubarry, M., Svoboda, V., Hwu, R., & Yann Liaw, B. (2006) · Electrochemical and Solid-State Letters · doi:10.1149/1.2221767 · Cited by 427
Improving battery safety by early detection of internal shorting with a bifunctional separator
Wu, H., Zhuo, D., Kong, D., & Cui, Y. (2014) · Nature Communications · doi:10.1038/ncomms6193 · Cited by 400
Miao, R., Yang, J., Feng, X., Jia, H., Wang, J., & Nuli, Y. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.08.011 · Cited by 361
Cohen, Y. S., Cohen, Y., & Aurbach, D. (2000) · The Journal of Physical Chemistry B · doi:10.1021/jp002526b · Cited by 360
Self-citationManipulating surface reactions in lithium–sulphur batteries using hybrid anode structures
Huang, C., Xiao, J., Shao, Y., Zheng, J., Bennett, W. D., Lu, D., Saraf, L. V., Engelhard, M., Ji, L., Zhang, J., et al. (2014) · Nature Communications · doi:10.1038/ncomms4015 · Cited by 343
A Highly Reversible Lithium Metal Anode
Park, M. S., Ma, S. B., Lee, D. J., Im, D., Doo, S.-G., & Yamamoto, O. (2014) · Scientific Reports · doi:10.1038/srep03815 · Cited by 339
Stitching h-BN by atomic layer deposition of LiF as a stable interface for lithium metal anode
Xie, J., Liao, L., Gong, Y., Li, Y., Shi, F., Pei, A., Sun, J., Zhang, R., Kong, B., Subbaraman, R., et al. (2017) · Science Advances · doi:10.1126/sciadv.aao3170 · Cited by 308
Wood, K. N., Steirer, K. X., Hafner, S. E., Ban, C., Santhanagopalan, S., Lee, S.-H., & Teeter, G. (2018) · Nature Communications · doi:10.1038/s41467-018-04762-z · Cited by 306
Zhamu, A., Chen, G., Liu, C., Neff, D., Fang, Q., Yu, Z., Xiong, W., Wang, Y., Wang, X., & Jang, B. Z. (2012) · Energy Environ. Sci. · doi:10.1039/c2ee02911a · Cited by 300
A review on anode for lithium-sulfur batteries: Progress and prospects
Zhao, H., Deng, N., Yan, J., Kang, W., Ju, J., Ruan, Y., Wang, X., Zhuang, X., Li, Q., & Cheng, B. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.04.112 · Cited by 299
Strategies towards enabling lithium metal in batteries: interphases and electrodes
Horstmann, B., Shi, J., Amine, R., Werres, M., He, X., Jia, H., Hausen, F., Cekic-Laskovic, I., Wiemers-Meyer, S., Lopez, J., et al. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00767j · Cited by 298
Effect of Electrolyte Composition on Lithium Dendrite Growth
Crowther, O., & West, A. C. (2008) · Journal of The Electrochemical Society · doi:10.1149/1.2969424 · Cited by 295
Sarasketa-Zabala, E., Gandiaga, I., Rodriguez-Martinez, L. M., & Villarreal, I. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.08.051 · Cited by 293
Liu, K., Zhuo, D., Lee, H., Liu, W., Lin, D., Lu, Y., & Cui, Y. (2017) · Advanced Materials · doi:10.1002/adma.201603987 · Cited by 288
Chang, H. J., Ilott, A. J., Trease, N. M., Mohammadi, M., Jerschow, A., & Grey, C. P. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b09385 · Cited by 285
Strong texturing of lithium metal in batteries
Shi, F., Pei, A., Vailionis, A., Xie, J., Liu, B., Zhao, J., Gong, Y., & Cui, Y. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1708224114 · Cited by 283
Ahmad, Z., Xie, T., Maheshwari, C., Grossman, J. C., & Viswanathan, V. (2018) · ACS Central Science · doi:10.1021/acscentsci.8b00229 · Cited by 279
Nanoparticle–protein corona complexes govern the biological fates and functions of nanoparticles
Gunawan, C., Lim, M., Marquis, C. P., & Amal, R. (2014) · Journal of Materials Chemistry B · doi:10.1039/c3tb21526a · Cited by 277
A Toolbox for Lithium–Sulfur Battery Research: Methods and Protocols
Zhang, G., Zhang, Z., Peng, H., Huang, J., & Zhang, Q. (2017) · Small Methods · doi:10.1002/smtd.201700134 · Cited by 260
Interactions between Lithium Growths and Nanoporous Ceramic Separators
Bai, P., Guo, J., Wang, M., Kushima, A., Su, L., Li, J., Brushett, F. R., & Bazant, M. Z. (2018) · Joule · doi:10.1016/j.joule.2018.08.018 · Cited by 256
Recent progress on electrolyte additives for stable lithium metal anode
Li, S., Luo, Z., Li, L., Hu, J., Zou, G., Hou, H., & Ji, X. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.07.008 · Cited by 256
Sarasketa-Zabala, E., Gandiaga, I., Martinez-Laserna, E., Rodriguez-Martinez, L. M., & Villarreal, I. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.10.153 · Cited by 210
Metadata
- Authors
- Aurbach, D., Zinigrad, E., Teller, H., & Dan, P.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2000
- Volume
- 147
- Issue
- 4
- Pages
- 1274
- ISSN
- 0013-4651 (ISSN-L)
- OpenAlex
- W1970676384
- Cited by
- 340
- References
- 0
- FWCI
- 4.76
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.