The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
The Impact of Elastic Deformation on Deposition Kinetics at Lithium/Polymer Interfaces
Open accessAbstract
Past theories of electrode stability assume that the surface tension resists the amplification of surface roughness at cathodes and show that instability at lithium/liquid interfaces cannot be prevented by surface forces alone [Electrochim. Acta, 40 , 599 (1995)]. This work treats interfacial stability in lithium/polymer systems where the electrolyte is solid. Linear elasticity theory is employed to compute the additional effect of bulk mechanical forces on electrode stability. The lithium and polymer are treated as Hookean elastic materials, characterized by their shear moduli and Poisson's ratios. Two-dimensional displacement distributions that satisfy force balances across a periodically deforming interface are derived; these allow computation of the stress and surface-tension forces. The incorporation of elastic effects into a kinetic model demonstrates regimes of electrolyte mechanical properties where amplification of surface roughness can be inhibited. For a polymer material with Poisson's ratio similar to poly(ethylene oxide), interfacial roughening is mechanically suppressed when the separator shear modulus is about twice that of lithium. © 2005 The Electrochemical Society. All rights reserved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Introduction to the mechanics of a continuous medium
Malvern, L. E. (1969) · Medical Entomology and Zoology · Cited by 3,937
Review of gel-type polymer electrolytes for lithium-ion batteries
Song, J. Y., Wang, Y. Y., & Wan, C. C. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(98)00193-1 · Cited by 1,491
Analysis of transport phenomena
Deen, W. M. (1998) · Cited by 1,237
Polymer solid electrolytes - an overview
Armand, M. (1983) · Solid State Ionics · doi:10.1016/0167-2738(83)90083-8 · Cited by 871
A Stable Thin‐Film Lithium Electrolyte: Lithium Phosphorus Oxynitride
Yu, X., Bates, J. B., Jellison, G. E., & Hart, F. X. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837443 · Cited by 808
Dendrite Growth in Lithium/Polymer Systems
Monroe, C., & Newman, J. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1606686 · Cited by 800
Self-citationHighly Conductive PEO-like Polymer Electrolytes
Abraham, K. M., Jiang, Z., & Carroll, B. (1997) · Chemistry of Materials · doi:10.1021/cm970075a · Cited by 461
The Effect of Interfacial Deformation on Electrodeposition Kinetics
Monroe, C., & Newman, J. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1710893 · Cited by 394
Self-citationLive Scanning Electron Microscope Observations of Dendritic Growth in Lithium/Polymer Cells
Dollé, M., Sannier, L., Beaudoin, B., Trentin, M., & Tarascon, J.-M. (2002) · Electrochemical and Solid-State Letters · doi:10.1149/1.1519970 · Cited by 278
Lithium Electrode Morphology during Cycling in Lithium Cells
Yoshimatsu, I., Hirai, T., & Yamaki, J. (1988) · Journal of The Electrochemical Society · doi:10.1149/1.2095351 · Cited by 257
Cited by
Items 101–160 of 160
Self-diffusion barriers: possible descriptors for dendrite growth in batteries?
Jäckle, M., Helmbrecht, K., Smits, M., Stottmeister, D., & Groß, A. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01448e · Cited by 365
Recent progress on solid-state hybrid electrolytes for solid-state lithium batteries
Liang, J., Luo, J., Sun, Q., Yang, X., Li, R., & Sun, X. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2019.06.021 · Cited by 365
In situ polymerization process: an essential design tool for lithium polymer batteries
Vijayakumar, V., Anothumakkool, B., Kurungot, S., Winter, M., & Nair, J. R. (2021) · Energy & Environmental Science · doi:10.1039/d0ee03527k · Cited by 365
Progress in Solid Polymer Electrolytes for Lithium‐Ion Batteries and Beyond
An, Y., Han, X., Liu, Y., Azhar, A., Na, J., Nanjundan, A. K., Wang, S., Yu, J., & Yamauchi, Y. (2022) · Small · doi:10.1002/smll.202103617 · Cited by 363
Chi, S.-S., Liu, Y., Zhao, N., Guo, X., Nan, C.-W., & Fan, L.-Z. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.07.004 · Cited by 362
Effect of Molecular Weight and Salt Concentration on Conductivity of Block Copolymer Electrolytes
Panday, A., Mullin, S., Gomez, E. D., Wanakule, N., Chen, V. L., Hexemer, A., Pople, J., & Balsara, N. P. (2009) · Macromolecules · doi:10.1021/ma900451e · Cited by 361
Strategies towards the challenges of zinc metal anode in rechargeable aqueous zinc ion batteries
Wang, J., Yang, Y., Zhang, Y., Li, Y., Sun, R., Wang, Z., & Wang, H. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2020.10.027 · Cited by 359
Schulze, M. W., McIntosh, L. D., Hillmyer, M. A., & Lodge, T. P. (2014) · Nano Letters · doi:10.1021/nl4034818 · Cited by 356
Designing Safe Electrolyte Systems for a High‐Stability Lithium–Sulfur Battery
Chen, W., Lei, T., Wu, C., Deng, M., Gong, C., Hu, K., Ma, Y., Dai, L., Lv, W., He, W., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702348 · Cited by 356
Design Strategies to Enable the Efficient Use of Sodium Metal Anodes in High‐Energy Batteries
Sun, B., Xiong, P., Maitra, U., Langsdorf, D., Yan, K., Wang, C., Janek, J., Schröder, D., & Wang, G. (2020) · Advanced Materials · doi:10.1002/adma.201903891 · Cited by 355
Shen, X., Zhang, R., Chen, X., Cheng, X., Li, X., & Zhang, Q. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903645 · Cited by 354
Single-phase local-high-concentration solid polymer electrolytes for lithium-metal batteries
Zhang, W., Koverga, V., Liu, S., Zhou, J., Wang, J., Bai, P., Tan, S., Dandu, N. K., Wang, Z., Chen, F., et al. (2024) · Nature Energy · doi:10.1038/s41560-023-01443-0 · Cited by 352
Shim, J., Kim, H. J., Kim, B. G., Kim, Y. S., Kim, D.-G., & Lee, J.-C. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01095h · Cited by 351
Mobile Ions in Composite Solids
Zou, Z., Li, Y., Lu, Z., Wang, D., Cui, Y., Guo, B., Li, Y., Liang, X., Feng, J., Li, H., et al. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00760 · Cited by 348
Ionic‐Liquid–Nanoparticle Hybrid Electrolytes: Applications in Lithium Metal Batteries
Lu, Y., Korf, K., Kambe, Y., Tu, Z., & Archer, L. A. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201307137 · Cited by 348
Fan, X., Zhong, C., Liu, J., Ding, J., Deng, Y., Han, X., Zhang, L., Hu, W., Wilkinson, D. P., & Zhang, J. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00196 · Cited by 347
Hybrid Electrolytes with Controlled Network Structures for Lithium Metal Batteries
Pan, Q., Smith, D. M., Qi, H., Wang, S., & Li, C. Y. (2015) · Advanced Materials · doi:10.1002/adma.201502059 · Cited by 345
Lithium dendrite growth mechanisms in polymer electrolytes and prevention strategies
Barai, P., Higa, K., & Srinivasan, V. (2017) · Physical Chemistry Chemical Physics · doi:10.1039/c7cp03304d · Cited by 339
A dendrite-suppressing composite ion conductor from aramid nanofibres
Tung, S.-O., Ho, S., Yang, M., Zhang, R., & Kotov, N. A. (2015) · Nature Communications · doi:10.1038/ncomms7152 · Cited by 336
Lithium Fluoride Additives for Stable Cycling of Lithium Batteries at High Current Densities
Choudhury, S., & Archer, L. A. (2016) · Advanced Electronic Materials · doi:10.1002/aelm.201500246 · Cited by 335
Lithium Mechanics: Roles of Strain Rate and Temperature and Implications for Lithium Metal Batteries
LePage, W. S., Chen, Y., Kazyak, E., Chen, K.-H., Sanchez, A. J., Poli, A., Arruda, E. M., Thouless, M. D., & Dasgupta, N. P. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0221902jes · Cited by 334
Formation of Magnesium Dendrites during Electrodeposition
Davidson, R., Verma, A., Santos, D., Hao, F., Fincher, C., Xiang, S., Van Buskirk, J., Xie, K., Pharr, M., Mukherjee, P. P., et al. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.8b02470 · Cited by 333
Cheng, X.-B., Peng, H.-J., Huang, J.-Q., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2015) · ACS Nano · doi:10.1021/acsnano.5b01990 · Cited by 321
Electrochemomechanics of lithium dendrite growth
Jana, A., Woo, S. I., Vikrant, K. S. N., & García, R. E. (2019) · Energy & Environmental Science · doi:10.1039/c9ee01864f · Cited by 318
Understanding and suppression strategies toward stable Li metal anode for safe lithium batteries
Yasin, G., Arif, M., Mehtab, T., Lu, X., Yu, D., Muhammad, N., Nazir, M. T., & Song, H. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.09.020 · Cited by 317
Yao, P., Zhu, B., Zhai, H., Liao, X., Zhu, Y., Xu, W., Cheng, Q., Jayyosi, C., Li, Z., Zhu, J., et al. (2018) · Nano Letters · doi:10.1021/acs.nanolett.8b01421 · Cited by 313
Visualizing Chemomechanical Degradation of a Solid-State Battery Electrolyte
Tippens, J., Miers, J. C., Afshar, A., Lewis, J. A., Cortes, F. J. Q., Qiao, H., Marchese, T. S., Di Leo, C. V., Saldana, C., & McDowell, M. T. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b00816 · Cited by 309
Grain Boundary Contributions to Li-Ion Transport in the Solid Electrolyte Li7La3Zr2O12 (LLZO)
Yu, S., & Siegel, D. J. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b02805 · Cited by 304
Xu, C., Ahmad, Z., Aryanfar, A., Viswanathan, V., & Greer, J. R. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1615733114 · Cited by 302
A review of challenges and issues concerning interfaces for all-solid-state batteries
Lim, H.-D., Park, J.-H., Shin, H.-J., Jeong, J., Kim, J. T., Nam, K.-W., Jung, H.-G., & Chung, K. Y. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.10.011 · Cited by 302
Electrospinning‐Based Strategies for Battery Materials
Li, X., Chen, W., Qian, Q., Huang, H., Chen, Y., Wang, Z., Chen, Q., Yang, J., Li, J., & Mai, Y. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000845 · Cited by 302
Interfacial Electronic Properties Dictate Li Dendrite Growth in Solid Electrolytes
Tian, H.-K., Liu, Z., Ji, Y., Chen, L.-Q., & Qi, Y. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b01967 · Cited by 301
Unlocking the Energy Capabilities of Lithium Metal Electrode with Solid-State Electrolytes
Shen, Y., Zhang, Y., Han, S., Wang, J., Peng, Z., & Chen, L. (2018) · Joule · doi:10.1016/j.joule.2018.06.021 · Cited by 293
Srivastava, S., Schaefer, J. L., Yang, Z., Tu, Z., & Archer, L. A. (2014) · Advanced Materials · doi:10.1002/adma.201303070 · Cited by 290
The promise of alloy anodes for solid-state batteries
Lewis, J. A., Cavallaro, K. A., Liu, Y., & McDowell, M. T. (2022) · Joule · doi:10.1016/j.joule.2022.05.016 · Cited by 289
Antiperovskite Electrolytes for Solid-State Batteries
Xia, W., Zhao, Y., Zhao, F., Adair, K., Zhao, R., Li, S., Zou, R., Zhao, Y., & Sun, X. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00594 · Cited by 288
Garnet Solid Electrolyte Protected Li-Metal Batteries
Liu, B., Gong, Y., Fu, K., Han, X., Yao, Y., Pastel, G., Yang, C., Xie, H., Wachsman, E. D., & Hu, L. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b03887 · Cited by 287
Homann, G., Stolz, L., Nair, J., Laskovic, I. C., Winter, M., & Kasnatscheew, J. (2020) · Scientific Reports · doi:10.1038/s41598-020-61373-9 · Cited by 284
Electroless Formation of a Fluorinated Li/Na Hybrid Interphase for Robust Lithium Anodes
Wang, Y., Liu, F., Fan, G., Qiu, X., Liu, J., Yan, Z., Zhang, K., Cheng, F., & Chen, J. (2021) · Journal of the American Chemical Society · doi:10.1021/jacs.0c12051 · Cited by 283
Progress and Perspective of Solid‐State Lithium–Sulfur Batteries
Lei, D., Shi, K., Ye, H., Wan, Z., Wang, Y., Shen, L., Li, B., Yang, Q., Kang, F., & He, Y. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707570 · Cited by 282
Wan, J., Xie, J., Mackanic, D. G., Burke, W., Bao, Z., & Cui, Y. (2018) · Materials Today Nano · doi:10.1016/j.mtnano.2018.12.003 · Cited by 281
Tough Hydrogel Electrolytes for Anti‐Freezing Zinc‐Ion Batteries
Yan, Y., Duan, S., Liu, B., Wu, S., Alsaid, Y., Yao, B., Nandi, S., Du, Y., Wang, T., Li, Y., et al. (2023) · Advanced Materials · doi:10.1002/adma.202211673 · Cited by 280
Design Principles of Artificial Solid Electrolyte Interphases for Lithium-Metal Anodes
Yu, Z., Cui, Y., & Bao, Z. (2020) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2020.100119 · Cited by 280
Ahmad, Z., Xie, T., Maheshwari, C., Grossman, J. C., & Viswanathan, V. (2018) · ACS Central Science · doi:10.1021/acscentsci.8b00229 · Cited by 279
How Does External Pressure Shape Li Dendrites in Li Metal Batteries?
Shen, X., Zhang, R., Shi, P., Chen, X., & Zhang, Q. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202003416 · Cited by 279
Universal Soldering of Lithium and Sodium Alloys on Various Substrates for Batteries
Wang, C., Xie, H., Zhang, L., Gong, Y., Pastel, G., Dai, J., Liu, B., Wachsman, E. D., & Hu, L. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701963 · Cited by 278
Heubner, C., Maletti, S., Auer, H., Hüttl, J., Voigt, K., Lohrberg, O., Nikolowski, K., Partsch, M., & Michaelis, A. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202106608 · Cited by 277
Liang, Y., Liu, H., Wang, G., Wang, C., Ni, Y., Nan, C., & Fan, L. (2022) · InfoMat · doi:10.1002/inf2.12292 · Cited by 273
Sharafi, A., Haslam, C. G., Kerns, R. D., Wolfenstine, J., & Sakamoto, J. (2017) · J. Mater. Chem. A · doi:10.1039/c7ta06790a · Cited by 272
Boaretto, N., Garbayo, I., Valiyaveettil-SobhanRaj, S., Quintela, A., Li, C., Casas-Cabanas, M., & Aguesse, F. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.229919 · Cited by 271
Highly Stable Sodium Batteries Enabled by Functional Ionic Polymer Membranes
Wei, S., Choudhury, S., Xu, J., Nath, P., Tu, Z., & Archer, L. A. (2017) · Advanced Materials · doi:10.1002/adma.201605512 · Cited by 267
Nucleation and Early Stage Growth of Li Electrodeposits
Biswal, P., Stalin, S., Kludze, A., Choudhury, S., & Archer, L. A. (2019) · Nano Letters · doi:10.1021/acs.nanolett.9b03548 · Cited by 265
Chemo-Mechanical Challenges in Solid-State Batteries
Lewis, J. A., Tippens, J., Cortes, F. J. Q., & McDowell, M. T. (2019) · Trends in Chemistry · doi:10.1016/j.trechm.2019.06.013 · Cited by 257
Interactions between Lithium Growths and Nanoporous Ceramic Separators
Bai, P., Guo, J., Wang, M., Kushima, A., Su, L., Li, J., Brushett, F. R., & Bazant, M. Z. (2018) · Joule · doi:10.1016/j.joule.2018.08.018 · Cited by 256
Recent progress on electrolyte additives for stable lithium metal anode
Li, S., Luo, Z., Li, L., Hu, J., Zou, G., Hou, H., & Ji, X. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.07.008 · Cited by 256
Polymer electrolytes and interfaces toward solid-state batteries: Recent advances and prospects
Wu, F., Zhang, K., Liu, Y., Gao, H., Bai, Y., Wang, X., & Wu, C. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.08.002 · Cited by 255
Strategies Based on Nitride Materials Chemistry to Stabilize Li Metal Anode
Zhu, Y., He, X., & Mo, Y. (2017) · Advanced Science · doi:10.1002/advs.201600517 · Cited by 254
Effect of external pressure and internal stress on battery performance and lifespan
Li, R., Li, W., Singh, A., Ren, D., Hou, Z., & Ouyang, M. (2022) · Energy Storage Materials · doi:10.1016/j.ensm.2022.07.034 · Cited by 254
Materials and processing for lithium-ion batteries
Daniel, C. (2008) · JOM · doi:10.1007/s11837-008-0116-x · Cited by 192
Liu, P., Xu, R., Liu, Y., Lin, F., & Zhao, K. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab78fa · Cited by 74
Metadata
- Authors
- Monroe, C., & Newman, J.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2005
- Volume
- 152
- Issue
- 2
- Pages
- A396
- ISSN
- 0013-4651 (ISSN-L)
- OpenAlex
- W1996879303
- Cited by
- 1,701
- References
- 13
- FWCI
- 1.27
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.