Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell
Open accessThe DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
Abstract
The galvanostatic charge and discharge of a lithium anode/solid polymer separator/insertion cathode cell is modeled using concentrated solution theory. The model is general enough to include a wide range of polymeric separator materials, lithium salts, and composite insertion cathodes. Insertion of lithium into the active cathode material is simulated using superposition, thus greatly simplifying the numerical calculations. Variable physical properties are permitted in the model. The results of a simulation of the charge/discharge behavior of the system are presented. Criteria are established to assess the importance of diffusion in the solid matrix and transport in the electrolyte. Consideration is also given to various procedures for optimization of the utilization of active cathode material.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“According to their outcomes, KF output is superior to RLS [91].”
In the citing paper
“Electrochemical models are somewhat more accurate than the classical acoustic ones as being based on the description of the battery's inner chemical processes such as lithium ions diffusion of within the electrodes and the electrolyte [31].”
From Review Paper for SOC Estimation Techniques: Challenges and Future Areas for Improvement (2024) · cites this paper as [31]
Citations
Cites
(1996) · Journal of Power Sources · doi:10.1016/s0378-7753(97)81054-3 · Cited by 463
Experimental Determination of the Transport Number of Water in Nafion 117 Membrane
Fuller, T. F., & Newman, J. (1992) · Journal of The Electrochemical Society · doi:10.1149/1.2069407 · Cited by 278
Self-citationAssessment of Polymer‐Electrolyte Batteries for EV and Ambient Temperature Applications
Gauthier, M., Fauteux, D., Vassort, G., Bélanger, A., Duval, M., Ricoux, P., Chabagno, J. M., Muller, D. A., Rigaud, P., Armand, M. B., et al. (1985) · Journal of The Electrochemical Society · doi:10.1149/1.2114112 · Cited by 156
Formation of a passivating film at the lithium-PEO-LiCF3SO3 interface
Fauteux, D. (1985) · Solid State Ionics · doi:10.1016/0167-2738(85)90061-x · Cited by 134
The fabrication and performance of all solid state polymer-based rechargeable lithium cells
Hooper, A. J., & North, J. M. (1983) · Solid State Ionics · doi:10.1016/0167-2738(83)90146-7 · Cited by 124
Laminar Boundary Layer Flows with Surface Reactions
Acrivos, A., & Chambré, P. L. (1957) · Industrial & Engineering Chemistry · doi:10.1021/ie50570a037 · Cited by 100
Status of rechargeable positive electrodes for ambient temperature lithium batteries
Abraham, K. M. (1981) · Journal of Power Sources · doi:10.1016/0378-7753(81)80058-4 · Cited by 88
A Polymeric Electrolyte Rechargeable Lithium Battery
Bonino, F., Ottaviani, M., Scrosati, B., et al. (1988) · Journal of The Electrochemical Society · doi:10.1149/1.2095538 · Cited by 72
Lithium Electrode/PEO‐Based Polymer Electrolyte Interface Behavior Between 60° and 120°C
Fauteux, D. (1988) · Journal of The Electrochemical Society · doi:10.1149/1.2096244 · Cited by 64
Performance of polymer electrolyte cells at +25 to +100°C
Munshi, M. (1988) · Solid State Ionics · doi:10.1016/0167-2738(88)90244-5 · Cited by 62
Cited by
Items 901–1,000 of 1,016
Recent advances of overcharge investigation of lithium-ion batteries
Chen, Y. (2021) · Ionics · doi:10.1007/s11581-021-04331-3 · Cited by 63
Localized lithium plating under mild cycling conditions in high-energy lithium-ion batteries
Smith, A. J., Fang, Y., Mikheenkova, A., Ekström, H., Svens, P. I., Ahmed, I., Lacey, M. J., Lindbergh, G., Furó, I., & Lindström, R. W. (2023) · Journal of Power Sources · doi:10.1016/j.jpowsour.2023.233118 · Cited by 72
Fan, C., Liu, K., Ren, Y., & Peng, Q. (2024) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2024.01.040 · Cited by 58
RETRACTED: An overview of mathematical modeling of electrochemical supercapacitors/ultracapacitors
Ike, I. S., Sigalas, I. J., Iyuke, S. E., et al. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.09.071 · Cited by 58
RetractedMathematical modeling of intercalation batteries at the cell level and beyond
Landstorfer, M., & Jacob, T. (2013) · Chemical Society Reviews · doi:10.1039/c2cs35050e · Cited by 64
Energy-Conscious Warm-Up of Li-Ion Cells From Subzero Temperatures
Mohan, S., Kim, Y., & Stefanopoulou, A. (2016) · IEEE transactions on industrial electronics (1982. Print) · doi:10.1109/tie.2016.2523440 · Cited by 54
“The more complex models are based on concentration theory, first proposed in [17].”
BackgroundWidanage, W. D., Barai, A., Chouchelamane, G., Uddin, K., McGordon, A., Marco, J., & Jennings, P. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.05.015 · Cited by 58
Rieger, B., Erhard, S. V., Kosch, S., Venator, M., Rheinfeld, A., & Jossen, A. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.1051614jes · Cited by 65
Murbach, M. D., & Schwartz, D. T. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.1021802jes · Cited by 65
Review on electrode-level fracture in lithium-ion batteries*
Lü, B., Ning, C., Shi, D., et al. (2020) · Chinese Physics B · doi:10.1088/1674-1056/ab6841 · Cited by 58
Battery State of Health Estimate Strategies: From Data Analysis to End-Cloud Collaborative Framework
Yang, K., Zhang, L., Zhang, Z., Yu, H., Wang, W., Ouyang, M., Zhang, C., Sun, Q., Yan, X., Yang, S., et al. (2023) · Batteries · doi:10.3390/batteries9070351 · Cited by 58
“The P2D model combines porous electrode theory and concentrated solution theory to provide a fundamental theoretical framework for the physical and electrochemical processes occurring within lithium-ion batteries [147].”
MethodDandeLiion v1: An Extremely Fast Solver for the Newman Model of Lithium-Ion Battery (Dis)charge
Korotkin, I., Sahu, S., O’Kane, S. E. J., Richardson, G. W., & Foster, J. M. (2021) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ac085f · Cited by 70
“The electrochemistry and electrical behaviour of a LIB cell is typically modelled by the Doyle Fuller Newman (DFN) model [5, 6, 7], which is also often called porous electrode theory or the P2D model.”
MethodHai, T., Abidi, A., Abed, A. M., Zhou, J., Malekshah, E. H., & Aybar, H. Ş. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.232117 · Cited by 57
Electrochemical models: methods and applications for safer lithium-ion battery operation
Sarkar, S., Halim, S. Z., El‐Halwagi, M. M., & Khan, F. I. (2022) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ac8ee2 · Cited by 65
Zheng, B., Deng, Z., Luo, Z., Mao, S., Ouyang, M., Han, X., Wang, H., Li, Y., Sun, Y., Wang, D., et al. (2025) · Applied Energy · doi:10.1016/j.apenergy.2025.126688 · Cited by 74
A parameter study of intercalation of lithium into storage particles in a lithium-ion battery
Purkayastha, R. T., & McMeeking, R. M. (2013) · Computational Materials Science · doi:10.1016/j.commatsci.2012.11.050 · Cited by 55
Natsiavas, P. P., Weinberg, K., Rosato, D., & Ortiz, M. (2016) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2016.05.007 · Cited by 53
Xia, L., Najafi, E., Li, Z., Bergveld, H. J., & Donkers, M. C. F. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.09.025 · Cited by 62
“A brief sum-mary of the model is given below and the interested reader is referred to [1,2], or to [16] for a more control-oriented exposition of the model.”
BackgroundMethodJiang, Z., Qu, Z., & Zhou, L. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.03.004 · Cited by 56
Joint structural and electrochemical modeling: Impact of porosity on lithium-ion battery performance
Laue, V., Röder, F., & Krewer, U. (2019) · Electrochimica Acta · doi:10.1016/j.electacta.2019.05.005 · Cited by 57
“The P2D model of Doyle et al. [1] is based on a set of partial differential equations for the mass and charge balances of solid (Eqs.”
InfluentialRodríguez, A., Plett, G. L., & Trimboli, M. S. (2019) · eTransportation · doi:10.1016/j.etran.2019.100009 · Cited by 58
Kolluri, S., Aduru, S. V., Pathak, M., et al. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab7bd7 · Cited by 57
A reduced order electrochemical thermal model for lithium ion cells
Gambhire, P., Ganesan, N., Basu, S., Hariharan, K. S., Kolake, S. M., Song, T., Oh, D., Yeo, T., & Doo, S. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.04.179 · Cited by 56
Thermal Management of Large-Format Prismatic Lithium-Ion Battery in PHEV Application
Lundgren, H., Svens, P. I., Ekström, H., Tengstedt, C., Lindström, J., Behm, M., & Lindbergh, G. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.09411602jes · Cited by 61
An analytical solution to Li/Li+ insertion into a porous electrode
LIU, S. (2005) · Solid State Ionics · doi:10.1016/j.ssi.2005.09.053 · Cited by 57
Delay constrained energy efficient transmission strategies for wireless devices
Nuggehalli, P., Srinivasan, V., & Rao, R. R. (2003) · Annual Joint Conference of the IEEE Computer and Communications Societies (INFOCOM) · doi:10.1109/infcom.2002.1019430 · Cited by 57
Li, X., Yuan, C., Wang, Z., & Xie, J. (2022) · Energy · doi:10.1016/j.energy.2021.122206 · Cited by 56
Mei, W., Duan, Q., Zhao, C., Lu, W. M., Sun, J., & Wang, Q. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.119082 · Cited by 55
Astaneh, M., Andrić, J., Löfdahl, L., et al. (2021) · Energy · doi:10.1016/j.energy.2021.122092 · Cited by 56
“A thermally enhanced Newman type pseudo two-dimensional (P2D) cell electrochemical model [15] was integrated into the module-to-module descritized pack electrical model [25,31] to consider cell-to-cell variations in inhomogeneous large traction battery packs.”
MethodFu, P., Zhao, L., Wang, X., Sun, J., & Xin, Z. (2023) · Processes · doi:10.3390/pr11123450 · Cited by 70
“Corresponding electrochemical-thermal models [8–12] and electrical-thermal models [13–17] have been established to analyze the heat transfer and temperature change within the battery pack.”
Shi, D., Cui, Y., Shen, X., Gao, Z., Ma, X., Xu, L. H., Fang, Y., Wang, S., & Fang, S. E. (2025) · RSC Advances · doi:10.1039/d5ra00934k · Cited by 73
Long, T., & Guo, Y. R. (2025) · Electrochemistry Communications · doi:10.1016/j.elecom.2025.108052 · Cited by 60
A lithium-ion battery model including electrical double layer effects
Marcicki, J., Conlisk, A. T., & Rizzoni, G. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.11.001 · Cited by 56
A coupled nonlinear equivalent circuit – Thermal model for lithium ion cells
Hariharan, K. S. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.11.044 · Cited by 56
The Morphology of Battery Electrodes with the Focus of the Conductive Additives Paths
Indrikova, M., Grunwald, S., Golks, F., Netz, A., Westphal, B., & Kwade, A. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0441510jes · Cited by 58
The impact of multi-layered porosity distribution on the performance of a lithium ion battery
Hosseinzadeh, E., Marco, J., & Jennings, P. A. (2018) · Applied Mathematical Modelling · doi:10.1016/j.apm.2018.04.001 · Cited by 62
Study of a lithium battery by confocal Raman microspectrometry
Rey, I., Lassègues, J. C., Baudry, P., et al. (1998) · Electrochimica Acta · doi:10.1016/s0013-4686(97)10050-0 · Cited by 56
Ringbeck, F., Garbade, M., & Sauer, D. U. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228221 · Cited by 55
Xu, Z., Guo, Y., & Saleh, J. H. (2022) · Neural Computing and Applications · doi:10.1007/s00521-022-07291-5 · Cited by 59
“The pseudo-two-dimensional (P2D) model, proposed by Doyle et al. [37], is the most common framework for describing physical processes governing LIB systems.”
MethodZhu, W., Zhou, P., Ren, D., Yang, M., Rui, X., Jin, C., Shen, T., Han, X., Zheng, Y., Lu, L., et al. (2022) · International Journal of Energy Research · doi:10.1002/er.8249 · Cited by 55
“The mechanistic calendar life model is established based on the P2D model developed by Doyle and Newman.24,25 The control equations of the P2D model are as follows: Charge balance equations in solid and liquid phases: ∂ ∂x σeff ∂ ∂x ϕs asFj¼ 0, ð1Þ ∂ ∂x κeff ∂ ∂x ϕe þ2RT tþ 1ð Þ F ∂ ∂x κeff ∂ ∂x lnce þasFj¼ 0: ð2Þ Mas…”
MethodYi, Y., Xia, C., Shi, L., Meng, L., Chi, Q., Qian, L., Ma, T., & Chen, S. (2024) · Energy · doi:10.1016/j.energy.2024.130541 · Cited by 58
Optimal control and state estimation of lithium-ion batteries using reformulated models
Suthar, B., Ramadesigan, V., Northrop, P., Gopaluni, B., Santhanagopalan, S., Braatz, R., & Subramanian, V. (2013) · American Control Conference · doi:10.1109/acc.2013.6580673 · Cited by 57
Computational electro-chemo-mechanics of lithium-ion battery electrodes at finite strains
Dal, H., & Miehé, C. (2014) · Computational Mechanics · doi:10.1007/s00466-014-1102-5 · Cited by 54
Amin, R., & Belharouak, I. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.02.070 · Cited by 55
Marelli, S., & Corno, M. (2020) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2020.2974176 · Cited by 55
“The pseudo-2-dimensional (P2D) electrochemical model, adopted in works such as [11]–[15], is widely recognized as a valuable tradeoff between detailed modeling and computational cost.”
MethodPozzi, A., Torchio, M., Braatz, R. D., & Raimondo, D. M. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228133 · Cited by 53
Impact Modeling and Testing of Pouch and Prismatic Cells
Deng, J., Smith, I., Bae, C., Rairigh, P., Miller, T., Surampudi, B., L’Eplattenier, P., & Çaldichoury, I. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab9962 · Cited by 58
Bragg Coherent Diffraction Imaging for In Situ Studies in Electrocatalysis
Vicente, R., Neckel, I. T., Sankaranarayanan, S. K. R. S., Solla‐Gullón, J., & Fernández, P. S. (2021) · ACS Nano · doi:10.1021/acsnano.1c01080 · Cited by 68
Battery optimization vs energy optimization: which to choose and when?
Rao, R. R., & Vrudhula, S. B. K. (2005) · doi:10.5555/1129601.1129664 · Cited by 55
Battery-Aware Routing for Streaming Data Transmissions in Wireless Sensor Networks
Ma, C., & Yang, Y. (2006) · Mobile Networks and Applications · doi:10.1007/s11036-006-7800-2 · Cited by 55
“A higher load electrical current results in a higher concentration gradient and thus a lower concentration of active species at the electrode surface [ 8 ].”
BackgroundFang, R., Ge, H., Wang, Z., Li, Z., & Zhang, J. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/abb83a · Cited by 58
Teo, L., Subramanian, V. R., & Schwartz, D. T. (2021) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/abda04 · Cited by 56
State of charge and state of health diagnosis of batteries with voltage-controlled models
Braun, J. A., Behmann, R., Schmider, D., & Bessler, W. G. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.231828 · Cited by 63
Analytical Solution to the Impedance of Electrode/Electrolyte Interface in Lithium-Ion Batteries
Huang, J., Li, Z. Y., Ge, H., & Zhang, J. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0081513jes · Cited by 53
Multi-dimensional modeling of large-scale lithium-ion batteries
Jung, S., & Kang, D. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.09.103 · Cited by 56
Low temperature performance of graphite and LiNi0.6Co0.2Mn0.2O2 electrodes in Li-ion batteries
Yaqub, A., Lee, Y., Hwang, M. J., Pervez, S. A., Farooq, U., Choi, J., Kim, D., Choi, H. Y., Cho, S.-B., & Doh, C. (2014) · Journal of Materials Science · doi:10.1007/s10853-014-8479-6 · Cited by 58
Representative volume element model of lithium-ion battery electrodes based on X-ray nano-tomography
Kashkooli, A. G., Amirfazli, A., Farhad, S., Lee, D. U., Felicelli, S. D., Park, H. W., Feng, K., Andrade, V. D., & Chen, Z. (2017) · Journal of Applied Electrochemistry · doi:10.1007/s10800-016-1037-y · Cited by 52
“For the micro-scale model, we reconstructed the 3D electrode morphology using nano-XCT, while for macro-scale, the galvanostatic discharge behavior was simulated by employing the homogenization theory and Newman psedudo-2D model [37, 38].”
Tian, J., Xiong, R., Shen, W., & Wang, J. (2020) · Chinese Journal of Mechanical Engineering · doi:10.1186/s10033-020-00467-x · Cited by 62
“9 EMs include a set of partial differential equations (PDEs) to describe electrochemical reactions [5,6].”
BackgroundMehta, R., & Gupta, A. K. (2021) · Electrochimica Acta · doi:10.1016/j.electacta.2021.138623 · Cited by 57
Impedance as a Tool for Investigating Aging in Lithium-Ion Porous Electrodes
Brown, S., Mellgren, N., Vynnycky, M., & Lindbergh, G. (2008) · Journal of The Electrochemical Society · doi:10.1149/1.2832654 · Cited by 54
Usseglio‐Viretta, F. L. E., Patel, P., Bernhardt, E., Mistry, A. N., Mukherjee, P. P., Allen, J. M., Cooper, S. J., Laurencin, J., & Smith, K. A. (2021) · SoftwareX · doi:10.1016/j.softx.2021.100915 · Cited by 56
Zantye, M. S., Gandhi, A., Wang, Y., Vudata, S. P., Bhattacharyya, D., & Hasan, M. M. F. (2022) · Energy & Environmental Science · doi:10.1039/d2ee00771a · Cited by 57
Xie, W., Guo, P., & Gao, X. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.110554 · Cited by 53
Multi-year field measurements of home storage systems and their use in capacity estimation
Figgener, J., van Ouwerkerk, J., Haberschusz, D., Bors, J., Woerner, P., Mennekes, M., Hildenbrand, F., Hecht, C., Kairies, K.-P., Wessels, O., et al. (2024) · Nature Energy · doi:10.1038/s41560-024-01620-9 · Cited by 73
Multiscale modeling and characterization for performance and safety of lithium-ion batteries
Pannala, S., Turner, J., Allu, S., Elwasif, W. R., Kalnaus, S., Simunovic, S., Kumar, A., Billings, J. J., Wang, H., & Nanda, J. (2015) · Journal of Applied Physics · doi:10.1063/1.4927817 · Cited by 55
Non-isothermal electrochemical model for lithium-ion cells with composite cathodes
Basu, S., Patil, R. S., Ramachandran, S., Hariharan, K. S., Kolake, S. M., Song, T., Oh, D., Yeo, T., & Doo, S. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.02.127 · Cited by 56
On uncertainty quantification of lithium-ion batteries: Application to an LiC6/LiCoO2 cell
Hadigol, M., Maute, K. K., & Doostan, A. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.09.060 · Cited by 65
“Among the proposed models for simulation of LIBs, the most widely used one is Newman’s model [18, 6, 19], which is based on the porous electrode and concentrated solution theories.”
BackgroundMethodInfluentialKim, J.-S., Lee, D.-C., Lee, J.-J., & Kim, C. (2020) · Scientific Reports · doi:10.1038/s41598-020-72442-4 · Cited by 57
Routing protocols to maximize battery efficiency
Chiasserini, C. F., & Rao, R. R. (2002) · IEEE Military Communications Conference (MILCOM) · doi:10.1109/milcom.2000.905002 · Cited by 53
“To show the real behavior of batteries and evaluate their performance we considered the electrochemical model of a dual lithium ion insertion cell [12], which is often used to supply portable devices.”
MethodGandomi, Y. A., Edmundson, M. D., Busby, F. C., & Mench, M. M. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.1331608jes · Cited by 54
Li, L., Wang, C., Yan, S., & Zhao, W. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.229204 · Cited by 52
Mistry, A. N., Trask, S. E., Dunlop, A. R., Jeka, G. T., Polzin, B. J., Mukherjee, P. P., & Srinivasan, V. (2021) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ac1033 · Cited by 54
Zadeh, P. G., Gholamalizadeh, E., Wang, Y., & Chung, J. D. (2022) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2022.101878 · Cited by 57
Fu, K., Li, X., Sun, K., et al. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202409623 · Cited by 52
Waseem, M., Lakshmi, G. S., Amir, M., Ahmad, M., & Suhaib, M. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.236414 · Cited by 67
An extended homogenized porous electrode model for lithium-ion cell electrodes
Ender, M. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.02.098 · Cited by 53
Life modeling of a lithium ion cell with a spinel-based cathode
Cai, L., Dai, Y., Nicholson, M., et al. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.08.046 · Cited by 52
Wang, W., Shu, G., Tian, H., & Zhu, X. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.03.070 · Cited by 52
Modeling of the electrochemical double layer and its impact on intercalation reactions
Lück, J., & Latz, A. (2018) · Physical Chemistry Chemical Physics · doi:10.1039/c8cp05113e · Cited by 52
Couto, L. D., Schorsch, J., Job, N., Léonard, A. F., & Kinnaert, M. (2018) · Journal of Energy Storage · doi:10.1016/j.est.2018.11.001 · Cited by 58
Liu, B., Wang, X., Chen, H., Chen, S., Hong-xin, Y., Xu, J., Jiang, H., & Fang, D.-N. (2019) · Journal of Applied Mechanics · doi:10.1115/1.4042432 · Cited by 53
Rheinfeld, A., Sturm, J., Noel, A., Wilhelm, J., Kriston, Á., Pfrang, A., & Jossen, A. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0071902jes · Cited by 55
Lybbert, M., Ghaemi, Z., Balaji, A. K., & Warren, R. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111004 · Cited by 57
Wang, Q., Shen, J.-N., Ma, Z., & He, Y. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.130308 · Cited by 53
Joo, H., Jung, S. Y., Kim, S., Ahn, K. H., Ryoo, W. S., & Yoon, J. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b07427 · Cited by 50
Ruan, H., Sun, B., Zhang, W., Su, X., & He, X. (2020) · IEEE Transactions on Intelligent Transportation Systems · doi:10.1109/tits.2020.3024801 · Cited by 51
“theory and concentrated solution theory [27], [28].”
Schmidt, A., Ramani, E., Carraro, T., Joos, J., Weber, A., Kamlah, M., & Ivers‐Tiffée, E. (2020) · Energy Technology · doi:10.1002/ente.202000881 · Cited by 58
Battery health evaluation using a short random segment of constant current charging
Deng, Z., Hu, X., Xie, Y., Xu, L., Li, P., Lin, X., & Bian, X. (2022) · iScience · doi:10.1016/j.isci.2022.104260 · Cited by 55
“Battery electrochemical models (Doyle et al., 1993) and equivalent circuit models (Plett, 2004a) are widely used to simulate battery behaviors.”
BackgroundAlipour, M., Yin, L., Sander-Tavallaey, S., Andersson, A. M., & Brandell, D. (2023) · Journal of Power Sources · doi:10.1016/j.jpowsour.2023.233273 · Cited by 51
“The Doyle–Fuller–Newman (DFN) or pseudo-2D (P2D) electrochemical model are the most common physics-based models for studying the behavior of LIBs [10,11].”
Gao, T., & Lu, W. D. (2023) · Applied Energy · doi:10.1016/j.apenergy.2023.121954 · Cited by 66
“[15] M. Doyle, T.F. Fuller, J. Newman, Modeling of galvanostatic charge and discharge of the lithium/polymer/insertion cell, J. Electrochem.”
MethodGoswami, B. R. D., Mastrogiorgio, M., Ragone, M., Jabbari, V., Shahbazian‐Yassar, R., Mashayek, F., & Yurkiv, V. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.234065 · Cited by 71
Osswald, P. J., Erhard, S. V., Wilhelm, J., Hoster, H. E., & Jossen, A. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0561510jes · Cited by 58
Non-Destructive Analysis of Degradation Mechanisms in Cycle-Aged Graphite/LiCoO2 Batteries
Zhang, L., Wang, L., Lyu, C., Li, J., & Zheng, J. (2014) · Energies · doi:10.3390/en7106282 · Cited by 52
“The electrochemical part is described by the pseudo two-dimensional (P2D) model [18,19].”
MethodGoverning equations for a two-scale analysis of Li-ion battery cells
Salvadori, A., Grazioli, D., & Geers, M. G. D. (2015) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2015.01.014 · Cited by 52
Silva, A. R., Liu, M., & Moghaddam, M. (2012) · Journal of Computer Networks and Communications · doi:10.1155/2012/757291 · Cited by 51
“The fact that the nominal lifetime of a primary cell can be a ff ected by pulse currents [10] can be confirmed by analyzing the Table 1 in conjunction with Figure 3.”
BackgroundModeling of volume change phenomena in a Li–air battery
Yoo, K., Banerjee, S., & Dutta, P. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.02.044 · Cited by 51
The Effect of Volume Change on the Accessible Capacities of Porous Silicon-Graphite Composite Anodes
Pereira, D. J., Weidner, J. W., & Garrick, T. R. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.1211906jes · Cited by 55
Data-Driven State of Health Estimation of Li-Ion Batteries With RPT-Reduced Experimental Data
Kim, J., Chun, H., Kim, M., Yu, J., Kim, K., Kim, T., & Han, S. (2019) · IEEE Access · doi:10.1109/access.2019.2932719 · Cited by 55
“Pseudo 2-dimensional (P2D) model, a rigorous battery model developed based on physical principles, was adopted to generate the data for the dynamic driving profiles [7], [22]–[25].”
MethodBai, Y., Santos, D. A., Rezaei, S., Stein, P., Banerjee, S., & Xu, B. (2021) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2021.111099 · Cited by 50
Oca, L., Miguel, E., Agirrezabala, E., Herrán, A., Gucciardi, E., Otaegui, L., Bekaert, É., Villaverde, A., & Iraola, U. (2021) · Electrochimica Acta · doi:10.1016/j.electacta.2021.138287 · Cited by 49
Metadata
- Authors
- Doyle, M., Fuller, T. F., & Newman, J.
- Affiliations
- Lawrence Berkeley National Laboratory (US)
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 1993-06-01
- Volume
- 140
- Issue
- 6
- Pages
- 1526-1533
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2113449668
- Cited by
- 4,328
- References
- 13
- Citations by year
- 2026: 466 · 2025: 496 · 2024: 401 · 2023: 374 · 2022: 303 · 2021: 306 · 2020: 288 · 2019: 212 · 2018: 190 · 2017: 183 · 2016: 165 · 2015: 150 · 2014: 150 · 2013: 144 · 2012: 109
- FWCI
- 6.42
- Type
- journal article
- Language
- en
- Open access
- bronze
- doi.org
- Licence
- iopscience.iop.org/page/copyright (vor, 9685 d)
- iopscience.iop.org/info/page/text-and-data-mining (tdm, 9685 d)
- Locations
- Journal of The Electrochemical Society (publishedVersion)
- Funders
- U.S. Department of Energy
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Battery Materials
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Battery Materials and Technologies
- Physical Sciences › Engineering › Automotive Engineering › Battery Modeling and Management
- Keywords
- lithium batteries, solid polymer electrolytes, concentrated solution theory, lithium metal anode, superposition method, electrolyte transport, composite cathode, lithium salts
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.