Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell
Open accessThe DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
Abstract
The galvanostatic charge and discharge of a lithium anode/solid polymer separator/insertion cathode cell is modeled using concentrated solution theory. The model is general enough to include a wide range of polymeric separator materials, lithium salts, and composite insertion cathodes. Insertion of lithium into the active cathode material is simulated using superposition, thus greatly simplifying the numerical calculations. Variable physical properties are permitted in the model. The results of a simulation of the charge/discharge behavior of the system are presented. Criteria are established to assess the importance of diffusion in the solid matrix and transport in the electrolyte. Consideration is also given to various procedures for optimization of the utilization of active cathode material.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“According to their outcomes, KF output is superior to RLS [91].”
In the citing paper
“Electrochemical models are somewhat more accurate than the classical acoustic ones as being based on the description of the battery's inner chemical processes such as lithium ions diffusion of within the electrodes and the electrolyte [31].”
From Review Paper for SOC Estimation Techniques: Challenges and Future Areas for Improvement (2024) · cites this paper as [31]
Citations
Cites
(1996) · Journal of Power Sources · doi:10.1016/s0378-7753(97)81054-3 · Cited by 463
Experimental Determination of the Transport Number of Water in Nafion 117 Membrane
Fuller, T. F., & Newman, J. (1992) · Journal of The Electrochemical Society · doi:10.1149/1.2069407 · Cited by 278
Self-citationAssessment of Polymer‐Electrolyte Batteries for EV and Ambient Temperature Applications
Gauthier, M., Fauteux, D., Vassort, G., Bélanger, A., Duval, M., Ricoux, P., Chabagno, J. M., Muller, D. A., Rigaud, P., Armand, M. B., et al. (1985) · Journal of The Electrochemical Society · doi:10.1149/1.2114112 · Cited by 156
Formation of a passivating film at the lithium-PEO-LiCF3SO3 interface
Fauteux, D. (1985) · Solid State Ionics · doi:10.1016/0167-2738(85)90061-x · Cited by 134
The fabrication and performance of all solid state polymer-based rechargeable lithium cells
Hooper, A. J., & North, J. M. (1983) · Solid State Ionics · doi:10.1016/0167-2738(83)90146-7 · Cited by 124
Laminar Boundary Layer Flows with Surface Reactions
Acrivos, A., & Chambré, P. L. (1957) · Industrial & Engineering Chemistry · doi:10.1021/ie50570a037 · Cited by 100
Status of rechargeable positive electrodes for ambient temperature lithium batteries
Abraham, K. M. (1981) · Journal of Power Sources · doi:10.1016/0378-7753(81)80058-4 · Cited by 88
A Polymeric Electrolyte Rechargeable Lithium Battery
Bonino, F., Ottaviani, M., Scrosati, B., et al. (1988) · Journal of The Electrochemical Society · doi:10.1149/1.2095538 · Cited by 72
Lithium Electrode/PEO‐Based Polymer Electrolyte Interface Behavior Between 60° and 120°C
Fauteux, D. (1988) · Journal of The Electrochemical Society · doi:10.1149/1.2096244 · Cited by 64
Performance of polymer electrolyte cells at +25 to +100°C
Munshi, M. (1988) · Solid State Ionics · doi:10.1016/0167-2738(88)90244-5 · Cited by 62
Cited by
Items 201–300 of 1,016
A paradigm of storage batteries
Ji, X. (2019) · Energy & Environmental Science · doi:10.1039/c9ee02356a · Cited by 228
Dong, T., Peng, P., & Jiang, F. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.10.024 · Cited by 221
Fractional-order modeling and parameter identification for lithium-ion batteries
Wang, B., Li, S. E., Peng, H., & Liu, Z. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.05.059 · Cited by 227
Simplification and order reduction of lithium-ion battery model based on porous-electrode theory
Dao, T.-S., Vyasarayani, C. P., & McPhee, J. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.09.034 · Cited by 225
A review of novel thermal management systems for batteries
Al-Zareer, M., Dincer, I., & Rosen, M. A. (2018) · International Journal of Energy Research · doi:10.1002/er.4095 · Cited by 224
Jia, J., Liang, J., Shi, Y., Wen, J., Pang, X., & Zeng, J. (2020) · Energies · doi:10.3390/en13020375 · Cited by 223
Extension of physics-based single particle model for higher charge–discharge rates
Khaleghi Rahimian, S., Rayman, S., & White, R. E. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.09.084 · Cited by 221
Entwistle, J., Ge, R., Pardikar, K., Smith, R., & Cumming, D. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112624 · Cited by 221
Modeling All-Solid-State Li-Ion Batteries
Danilov, D., Niessen, R. A. H., & Notten, P. H. L. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3521414 · Cited by 219
Scharf, J., Chouchane, M., Finegan, D. P., Lu, B., Redquest, C., Kim, M.-C., Yao, W., Franco, A. A., Gostovic, D., Liu, Z., et al. (2022) · Nature Nanotechnology · doi:10.1038/s41565-022-01081-9 · Cited by 219
“The Newman’s model, a first-generation mathematical model of a lithium-ion battery, was developed in 1993 127,128 .”
MethodCheng, Y.-T., & Verbrugge, M. W. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3298892 · Cited by 220
Continuum and atomistic models of strongly coupled diffusion, stress, and solute concentration
Haftbaradaran, H., Song, J., Curtin, W. A., & Gao, H. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.06.080 · Cited by 218
An electrochemical–thermal model based on dynamic responses for lithium iron phosphate battery
Li, J., Cheng, Y., Jia, M., Tang, Y., Lin, Y., Zhang, Z., & Liu, Y. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.007 · Cited by 219
A continuum of physics-based lithium-ion battery models reviewed
Brosa Planella, F., Ai, W., Boyce, A. M., Ghosh, A., Korotkin, I., Sahu, S., Sulzer, V, Timms, R., Tranter, T. G., Zyskin, M., et al. (2022) · Progress in Energy · doi:10.1088/2516-1083/ac7d31 · Cited by 217
“homogenised model, even though in [30, 40, 41] it was originally justified on an ad hoc basis, rather than being formally derived.”
Parameter Estimation and Capacity Fade Analysis of Lithium-Ion Batteries Using Reformulated Models
Ramadesigan, V., Chen, K., Burns, N. A., Boovaragavan, V., Braatz, R. D., & Subramanian, V. R. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3609926 · Cited by 216
Wang, C. Y., & Srinivasan, V. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00199-4 · Cited by 217
Lin, C.-E., Zhang, H., Song, Y.-Z., Zhang, Y., Yuan, J.-J., & Zhu, B.-K. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta08702k · Cited by 217
Microstructural Evolution of Battery Electrodes During Calendering
Lu, X., Daemi, S. R., Bertei, A., Kok, M. D. R., O’Regan, K. B., Rasha, L., Park, J., Hinds, G., Kendrick, E., Brett, D. J. L., et al. (2020) · Joule · doi:10.1016/j.joule.2020.10.010 · Cited by 215
Lee, K.-J., Smith, K., Pesaran, A., & Kim, G.-H. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.007 · Cited by 212
A model for battery lifetime analysis for organizing applications on a pocket computer
Rakhmatov, D., Vrudhula, S., & Wallach, D. A. (2003) · IEEE Transactions on Very Large Scale Integration (VLSI) Systems · doi:10.1109/tvlsi.2003.819320 · Cited by 212
“With these settings, the chosen Itsy loads were simulated using DUALFOIL.”
BackgroundMethodInfluentialHu, J., Jiang, Y., Cui, S., Duan, Y., Liu, T., Guo, H., Lin, L., Lin, Y., Zheng, J., Amine, K., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600856 · Cited by 214
Aging aware operation of lithium-ion battery energy storage systems: A review
Collath, N., Tepe, B., Englberger, S., Jossen, A., & Hesse, H. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.105634 · Cited by 210
Moura, S. J., Stein, J. L., & Fathy, H. K. (2013) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2012.2189773 · Cited by 211
“As a case study, we examine a model particularly wellsuited for model reduction and control applications that account for lithium diffusion dynamics, intercalation kinetics, and electrochemical potentials developed by Doyle, Fuller, and Newman [12], [13].”
Mei, W., Chen, H., Sun, J., & Wang, Q. (2019) · Sustainable Energy & Fuels · doi:10.1039/c8se00503f · Cited by 211
The Effects of Defects on Localized Plating in Lithium-Ion Batteries
Cannarella, J., & Arnold, C. B. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.1051507jes · Cited by 210
Diffusion and migration in polymer electrolytes
Choo, Y., Halat, D. M., Villaluenga, I., Timachova, K., & Balsara, N. P. (2020) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2020.101220 · Cited by 209
“These parameters were first described by Onsager[17] and later formalized for battery applications by Newman.[18, 19] Polymer electrolytes covered in this”
BackgroundMethodInfluentialLi, W., Demir, I., Cao, D., Jöst, D., Ringbeck, F., Junker, M., & Sauer, D. U. (2022) · Energy Storage Materials · doi:10.1016/j.ensm.2021.10.023 · Cited by 206
Measurement of three-dimensional microstructure in a LiCoO2 positive electrode
Wilson, J. R., Cronin, J. S., Barnett, S. A., & Harris, S. J. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.04.066 · Cited by 207
Mathematical Modeling of Lithium Batteries
Thomas, K. E., Newman, J., & Darling, R. M. (2002) · Advances in Lithium-Ion Batteries · doi:10.1007/0-306-47508-1_13 · Cited by 206
Self-citationSchmidt, J. P., Berg, P., Schönleber, M., Weber, A., & Ivers-Tiffée, E. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.07.100 · Cited by 206
Battery life estimation of mobile embedded systems
Panigrahi, D., Chiasserini, C., Dey, S., Rao, R., Raghunathan, A., & Lahiri, K. (2001) · VLSI Design 2001. Fourteenth International Conference on VLSI Design · doi:10.1109/icvd.2001.902640 · Cited by 204
“An accurate battery model, representingfine-grained electro-chemical phenomenonof cell dischar geusingPartial DifferentialEquations(PDE),waspresentedin [14].”
MethodInfluentialTagade, P., Hariharan, K. S., Ramachandran, S., Khandelwal, A., Naha, A., Kolake, S. M., & Han, S. H. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.227281 · Cited by 204
Wang, Z., Ma, J., & Zhang, L. (2017) · IEEE Access · doi:10.1109/access.2017.2759094 · Cited by 205
“For example, the growth of solid electrolyte interface (SEI) film has widely been considered as the main source of capacity loss and loss of active material (LAM), resulting in a flotilla of electrochemical models [12], [13].”
BackgroundComan, P. T., Darcy, E. C., Veje, C. T., & White, R. E. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0341704jes · Cited by 199
Xu, L., Lin, X., Xie, Y., & Hu, X. (2022) · Energy Storage Materials · doi:10.1016/j.ensm.2021.12.044 · Cited by 201
Effect of Porosity on the Capacity Fade of a Lithium-Ion Battery
Sikha, G., Popov, B. N., & White, R. E. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1759972 · Cited by 203
Perspectives and challenges for future lithium-ion battery control and management
Wang, Y., Zhang, X., Li, K., Zhao, G., & Chen, Z. (2023) · eTransportation · doi:10.1016/j.etran.2023.100260 · Cited by 200
Liu, B., Tang, X., & Gao, F. (2020) · Electrochimica Acta · doi:10.1016/j.electacta.2020.136098 · Cited by 199
Thermal–electrochemical model for passive thermal management of a spiral-wound lithium-ion battery
Somasundaram, K., Birgersson, E., & Mujumdar, A. S. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.11.075 · Cited by 196
A Framework for Simplification of PDE-Based Lithium-Ion Battery Models
Zou, C., Manzie, C., & Nesic, D. (2016) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2015.2502899 · Cited by 196
“An electrochemistry-based model of a Li-ion cell was initially proposed in [5] based on porous electrode theory and concentrated solution theory.”
BackgroundMethodModelling the impact of variations in electrode manufacturing on lithium-ion battery modules
Kenney, B., Darcovich, K., MacNeil, D. D., & Davidson, I. J. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.03.065 · Cited by 197
Northrop, P. W. C., Ramadesigan, V., De, S., & Subramanian, V. R. (2011) · Journal of The Electrochemical Society · doi:10.1149/2.058112jes · Cited by 197
Feng, X., He, X., Ouyang, M., Wang, L., Lu, L., Ren, D., & Santhanagopalan, S. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0311816jes · Cited by 194
Battery management strategies: An essential review for battery state of health monitoring techniques
Pradhan, S. K., & Chakraborty, B. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.104427 · Cited by 194
Optimal charging strategies in lithium-ion battery
Klein, R., Chaturvedi, N. A., Christensen, J., Ahmed, J., Findeisen, R., & Kojic, A. (2011) · Proceedings of the 2011 American Control Conference · doi:10.1109/acc.2011.5991497 · Cited by 196
“The governing equations are given by (see also [1], [7], [8]) ǫe ∂ce(x,t) ∂t = ∂ ∂x (”
Lithium-ion battery modeling and parameter identification based on fractional theory
Hu, M., Li, Y., Li, S., Fu, C., Qin, D., & Li, Z. (2018) · Energy · doi:10.1016/j.energy.2018.09.101 · Cited by 195
Mei, W., Jiang, L., Liang, C., Sun, J., & Wang, Q. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2021.06.013 · Cited by 194
Porous Electrode Modeling and its Applications to Li‐Ion Batteries
Chen, Z., Danilov, D. L., Eichel, R., & Notten, P. H. L. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202201506 · Cited by 190
Newell, D., & Duffy, M. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2894465 · Cited by 191
Zhao, Y., Zou, B., Zhang, T., Jiang, Z., Ding, J., & Ding, Y. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112667 · Cited by 191
Recent Advances in Machine Learning‐Assisted Multiscale Design of Energy Materials
Mortazavi, B. (2025) · Advanced Energy Materials · doi:10.1002/aenm.202403876 · Cited by 188
Multi-objective optimization of lithium-ion battery model using genetic algorithm approach
Zhang, L., Wang, L., Hinds, G., Lyu, C., Zheng, J., & Li, J. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.07.110 · Cited by 189
Albertus, P., Christensen, J., & Newman, J. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3129656 · Cited by 189
Self-citationIntegrating physics-based modeling with machine learning for lithium-ion batteries
Tu, H., Moura, S., Wang, Y., & Fang, H. (2023) · Applied Energy · doi:10.1016/j.apenergy.2022.120289 · Cited by 190
“A well-known electrochemical model is the Doyle-Fuller-Newman (DFN) model, which is broadly considered reliable and precise enough for almost all LiB management scenarios [3, 4].”
MethodExtremely fast-charging lithium ion battery enabled by dual-gradient structure design
Lu, L.-L., Lu, Y.-Y., Zhu, Z.-X., Shao, J.-X., Yao, H.-B., Wang, S., Zhang, T.-W., Ni, Y., Wang, X.-X., & Yu, S.-H. (2022) · Science Advances · doi:10.1126/sciadv.abm6624 · Cited by 190
Modeling Nail Penetration Process in Large-Format Li-Ion Cells
Zhao, W., Luo, G., & Wang, C.-Y. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.1071501jes · Cited by 187
Uddin, K., Perera, S., Widanage, W., Somerville, L., & Marco, J. (2016) · Batteries · doi:10.3390/batteries2020013 · Cited by 186
“[12] that combines concentrated solution kinetics, mass conservation, charge conservation, and transport and conduction in porous media.”
BackgroundElectrode scale and electrolyte transport effects on extreme fast charging of lithium-ion cells
Colclasure, A. M., Tanim, T. R., Jansen, A. N., Trask, S. E., Dunlop, A. R., Polzin, B. J., Bloom, I., Robertson, D., Flores, L., Evans, M., et al. (2020) · Electrochimica Acta · doi:10.1016/j.electacta.2020.135854 · Cited by 185
Gerver, R. E., & Meyers, J. P. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3591799 · Cited by 184
A phase‐field model for chemo‐mechanical induced fracture in lithium‐ion battery electrode particles
Miehe, C., Dal, H., Schänzel, L. ‐., & Raina, A. (2016) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.5133 · Cited by 181
“Newmann J, Thomas-Alyea KE.”
MethodInfluentialMei, W., Zhang, L., Sun, J., & Wang, Q. (2020) · Energy storage materials · doi:10.1016/j.ensm.2020.06.021 · Cited by 183
Li, Y., Zhou, Z., & Wu, W.-T. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.11.009 · Cited by 182
Smith, K. C., & Dmello, R. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0761603jes · Cited by 180
Liu, K., Gao, Y., Zhu, C., Li, K., Fei, M., Peng, C., Zhang, X., & Han, Q.-L. (2022) · Control Engineering Practice · doi:10.1016/j.conengprac.2022.105176 · Cited by 179
Economic implications of lithium ion battery degradation for Vehicle-to-Grid (V2X) services
Thompson, A. W. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.06.053 · Cited by 178
Hosseininasab, S., Lin, C., Pischinger, S., Stapelbroek, M., & Vagnoni, G. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.104684 · Cited by 177
Orikasa, Y., Gogyo, Y., Yamashige, H., Katayama, M., Chen, K., Mori, T., Yamamoto, K., Masese, T., Inada, Y., Ohta, T., et al. (2016) · Scientific Reports · doi:10.1038/srep26382 · Cited by 178
Modeling of lithium plating and lithium stripping in lithium-ion batteries
von Lüders, C., Keil, J., Webersberger, M., & Jossen, A. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.12.084 · Cited by 177
Simulation of cooling plate effect on a battery module with different channel arrangement
Li, X., Zhao, J., Duan, J., Panchal, S., Yuan, J., Fraser, R., Fowler, M., & Chen, M. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.104113 · Cited by 175
Safari, M., & Delacourt, C. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3515902 · Cited by 176
Electro-thermal cycle life model for lithium iron phosphate battery
Ye, Y., Shi, Y., & Tay, A. A. O. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.06.055 · Cited by 177
Mortazavi, B., Yang, H., Mohebbi, F., Cuniberti, G., & Rabczuk, T. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.05.175 · Cited by 175
“loadings, a model within the framework of Newman's pseudo 2D electrochemical model [24]”
BackgroundMethodInfluentialCurrent Trends for State-of-Charge (SoC) Estimation in Lithium-Ion Battery Electric Vehicles
Espedal, I. B., Jinasena, A., Burheim, O. S., & Lamb, J. J. (2021) · Energies · doi:10.3390/en14113284 · Cited by 177
“A pseudo-two-dimensi al model has be n developed that considers that the cell anode and cathode as porous consisting of ball-like particles with he electroly e filling the gaps in-between [18].”
BackgroundHuang, J., & Zhang, J. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0901609jes · Cited by 176
An, Z., Jia, L., Wei, L., Dang, C., & Peng, Q. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.04.014 · Cited by 173
Hein, S., Danner, T., Westhoff, D., Prifling, B., Scurtu, R., Kremer, L., Hoffmann, A., Hilger, A., Osenberg, M., Manke, I., et al. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab6b1d · Cited by 175
A new extension of physics-based single particle model for higher charge–discharge rates
Luo, W., Lyu, C., Wang, L., & Zhang, L. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.04.129 · Cited by 173
Mathematical modeling of porous battery electrodes—Revisit of Newman's model
Lai, W., & Ciucci, F. (2011) · Electrochimica Acta · doi:10.1016/j.electacta.2011.01.012 · Cited by 171
Size-Dependent Spinodal and Miscibility Gaps for Intercalation in Nanoparticles
Burch, D., & Bazant, M. Z. (2009) · Nano Letters · doi:10.1021/nl9019787 · Cited by 174
Kong, X., Plett, G. L., Scott Trimboli, M., Zhang, Z., Qiao, D., Zhao, T., & Zheng, Y. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2019.101085 · Cited by 173
Next-generation battery management systems: dynamic reconfiguration
Han, W., Wik, T., Kersten, A., Dong, G., & Zou, C. (2020) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2020.3002486 · Cited by 173
“Based on the porous electrode theory and concentrated solution theory, an initial model was proposed in [47], consisting of a set of partial differential–algebraic equations (PDAEs).”
MethodPanchal, S., Dincer, I., Agelin-Chaab, M., Fraser, R., & Fowler, M. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.03.005 · Cited by 173
“[40, 28] and utilized by different researchers [41, 42], separates the battery into the particle and electrode domains.”
MethodHigh Rate Capability of Li(Ni1/3Mn1/3Co1/3)O2Electrode for Li-Ion Batteries
Wu, S.-L., Zhang, W., Song, X., Shukla, A. K., Liu, G., Battaglia, V., & Srinivasan, V. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.062204jes · Cited by 170
Review—Lithium Plating Detection Methods in Li-Ion Batteries
Janakiraman, U., Garrick, T. R., & Fortier, M. E. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/abd3b8 · Cited by 169
El Mejdoubi, A., Oukaour, A., Chaoui, H., Gualous, H., Sabor, J., & Slamani, Y. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2509916 · Cited by 170
Seong Kim, U., Yi, J., Shin, C. B., Han, T., & Park, S. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3565179 · Cited by 170
Wiedemann, A. H., Goldin, G. M., Barnett, S. A., Zhu, H., & Kee, R. J. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2012.10.104 · Cited by 168
State of charge estimation using an unscented filter for high power lithium ion cells
Santhanagopalan, S., & White, R. E. (2010) · International Journal of Energy Research · doi:10.1002/er.1655 · Cited by 167
“A comprehensive model including such limitations [35] will be difficult to cast into the form of linear ODEs to be used along with an EKF.”
MethodChu, Z., Feng, X., Lu, L., Li, J., Han, X., & Ouyang, M. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.03.111 · Cited by 168
Sauerteig, D., Hanselmann, N., Arzberger, A., Reinshagen, H., Ivanov, S., & Bund, A. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.12.044 · Cited by 167
An analytical high-level battery model for use in energy management of portable electronic systems
Rakhmatov, D. N., & Vrudhula, S. B. K. (2002) · IEEE/ACM International Conference on Computer Aided Design. ICCAD 2001. IEEE/ACM Digest of Technical Papers (Cat. No.01CH37281) · doi:10.1109/iccad.2001.968687 · Cited by 167
“There already exist tools that allow for detailed analysis of the battery at the microscopic scale [5, 8].”
BackgroundMethodWireless Sensor Networks with Energy Harvesting
Basagni, S., Naderi, M. Y., Petrioli, C., & Spenza, D. (2013) · Mobile Ad Hoc Networking · doi:10.1002/9781118511305.ch20 · Cited by 167
“These models are usually very accurate, but have high computational complexity and require high configuration effort [36, 46].”
BackgroundTwo-dimensional electrochemical–thermal coupled modeling of cylindrical LiFePO4 batteries
Xu, M., Zhang, Z., Wang, X., Jia, L., & Yang, L. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.070 · Cited by 167
Investigation of the thermal performance of axial-flow air cooling for the lithium-ion battery pack
Yang, T., Yang, N., Zhang, X., & Li, G. (2016) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2016.05.009 · Cited by 166
Design considerations for battery-powered electronics
Pedram, M., & Wu, Q. (1999) · Proceedings of the 36th annual ACM/IEEE Design Automation Conference · doi:10.1145/309847.310089 · Cited by 166
“Similar curves exist for other lithium batteries [8][9][15] and for NiMH batteries [14][15].”
BackgroundRagone, M., Yurkiv, V., Ramasubramanian, A., Kashir, B., & Mashayek, F. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.229108 · Cited by 162
Application of Digital Twin in Smart Battery Management Systems
Wang, W., Wang, J., Tian, J., Lu, J., & Xiong, R. (2021) · Chinese Journal of Mechanical Engineering · doi:10.1186/s10033-021-00577-0 · Cited by 164
“The P2D model is based on theory of concentrated solution and porous electrode [49, 50], and can describe the local behavior in the thickness direction of the battery.”
MethodColclasure, A. M., Smith, K. A., & Kee, R. J. (2011) · Electrochimica Acta · doi:10.1016/j.electacta.2011.08.067 · Cited by 163
Galvanostatic Intermittent Titration and Performance Based Analysis of LiNi0.5Co0.2Mn0.3O2Cathode
Verma, A., Smith, K., Santhanagopalan, S., Abraham, D., Yao, K. P., & Mukherjee, P. P. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1701713jes · Cited by 161
Oxide‐Based Solid‐State Batteries: A Perspective on Composite Cathode Architecture
Ren, Y., Danner, T., Moy, A., Finsterbusch, M., Hamann, T., Dippell, J., Fuchs, T., Müller, M., Hoft, R., Weber, A., et al. (2023) · Advanced Energy Materials · doi:10.1002/aenm.202201939 · Cited by 162
Metadata
- Authors
- Doyle, M., Fuller, T. F., & Newman, J.
- Affiliations
- Lawrence Berkeley National Laboratory (US)
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 1993-06-01
- Volume
- 140
- Issue
- 6
- Pages
- 1526-1533
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2113449668
- Cited by
- 4,328
- References
- 13
- Citations by year
- 2026: 466 · 2025: 496 · 2024: 401 · 2023: 374 · 2022: 303 · 2021: 306 · 2020: 288 · 2019: 212 · 2018: 190 · 2017: 183 · 2016: 165 · 2015: 150 · 2014: 150 · 2013: 144 · 2012: 109
- FWCI
- 6.42
- Type
- journal article
- Language
- en
- Open access
- bronze
- doi.org
- Licence
- iopscience.iop.org/page/copyright (vor, 9685 d)
- iopscience.iop.org/info/page/text-and-data-mining (tdm, 9685 d)
- Locations
- Journal of The Electrochemical Society (publishedVersion)
- Funders
- U.S. Department of Energy
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Battery Materials
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Battery Materials and Technologies
- Physical Sciences › Engineering › Automotive Engineering › Battery Modeling and Management
- Keywords
- lithium batteries, solid polymer electrolytes, concentrated solution theory, lithium metal anode, superposition method, electrolyte transport, composite cathode, lithium salts
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.