The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell
Open accessAbstract
The galvanostatic charge and discharge of a lithium anode/solid polymer separator/insertion cathode cell is modeled using concentrated solution theory. The model is general enough to include a wide range of polymeric separator materials, lithium salts, and composite insertion cathodes. Insertion of lithium into the active cathode material is simulated using superposition, thus greatly simplifying the numerical calculations. Variable physical properties are permitted in the model. The results of a simulation of the charge/discharge behavior of the system are presented. Criteria are established to assess the importance of diffusion in the solid matrix and transport in the electrolyte. Consideration is also given to various procedures for optimization of the utilization of active cathode material.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“According to their outcomes, KF output is superior to RLS [91].”
In the citing paper
“Electrochemical models are somewhat more accurate than the classical acoustic ones as being based on the description of the battery's inner chemical processes such as lithium ions diffusion of within the electrodes and the electrolyte [31].”
From Review Paper for SOC Estimation Techniques: Challenges and Future Areas for Improvement (2024) · cites this paper as [31]
Citations
Cites
(1996) · Journal of Power Sources · doi:10.1016/s0378-7753(97)81054-3 · Cited by 463
Experimental Determination of the Transport Number of Water in Nafion 117 Membrane
Fuller, T. F., & Newman, J. (1992) · Journal of The Electrochemical Society · doi:10.1149/1.2069407 · Cited by 278
Self-citationAssessment of Polymer‐Electrolyte Batteries for EV and Ambient Temperature Applications
Gauthier, M., Fauteux, D., Vassort, G., Bélanger, A., Duval, M., Ricoux, P., Chabagno, J. M., Muller, D. A., Rigaud, P., Armand, M. B., et al. (1985) · Journal of The Electrochemical Society · doi:10.1149/1.2114112 · Cited by 156
Formation of a passivating film at the lithium-PEO-LiCF3SO3 interface
Fauteux, D. (1985) · Solid State Ionics · doi:10.1016/0167-2738(85)90061-x · Cited by 134
Laminar Boundary Layer Flows with Surface Reactions
Acrivos, A., & Chambré, P. L. (1957) · Industrial & Engineering Chemistry · doi:10.1021/ie50570a037 · Cited by 100
The fabrication and performance of all solid state polymer-based rechargeable lithium cells
Hooper, A. J., & North, J. M. (1983) · Solid State Ionics · doi:10.1016/0167-2738(83)90146-7 · Cited by 97
Status of rechargeable positive electrodes for ambient temperature lithium batteries
Abraham, K. M. (1981) · Journal of Power Sources · doi:10.1016/0378-7753(81)80058-4 · Cited by 88
A Polymeric Electrolyte Rechargeable Lithium Battery
Bonino, F., Ottaviani, M., Scrosati, B., et al. (1988) · Journal of The Electrochemical Society · doi:10.1149/1.2095538 · Cited by 72
Lithium Electrode/PEO‐Based Polymer Electrolyte Interface Behavior Between 60° and 120°C
Fauteux, D. (1988) · Journal of The Electrochemical Society · doi:10.1149/1.2096244 · Cited by 64
Performance of polymer electrolyte cells at +25 to +100°C
Munshi, M. (1988) · Solid State Ionics · doi:10.1016/0167-2738(88)90244-5 · Cited by 62
Cited by
A critical review of thermal issues in lithium-ion batteries
Bandhauer, T. M., Garimella, S., & Fuller, T. F. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3515880 · Cited by 2,192
“Summary of insertion electrode lithium-battery thermal s Simulation studies on lithium-based batteries Negative/positive electrode material Wou Pals and Newman83 Li/LiTiS2 Botte et al.77 C/LiNiO2 Thomas and Newman49 Li/LiAl0.”
BackgroundMethodInfluentialSelf-citationArora, P., & Zhang, Z. (. (2004) · Chemical Reviews · doi:10.1021/cr020738u · Cited by 2,175
A review on lithium-ion battery ageing mechanisms and estimations for automotive applications
Barré, A., Deguilhem, B., Grolleau, S., Gérard, M., Suard, F., & Riu, D. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.05.040 · Cited by 1,758
“On the other side, it is possible to identify the prominent occurring physico-chemical processes depending on the employed materials, and evaluate with atomistic calculations, their e ect on the battery [78, 79].”
BackgroundA review on the key issues of the lithium ion battery degradation among the whole life cycle
Han, X., Lu, L., Zheng, Y., Feng, X., Li, Z., Li, J., & Ouyang, M. (2019) · eTransportation · doi:10.1016/j.etran.2019.100005 · Cited by 1,745
A review of conduction phenomena in Li-ion batteries
Park, M., Zhang, X., Chung, M., Less, G. B., & Sastry, A. M. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.06.060 · Cited by 1,627
Lithium-ion battery fast charging: A review
Tomaszewska, A., Chu, Z., Feng, X., O'Kane, S., Liu, X., Chen, J., Ji, C., Endler, E., Li, R., Liu, L., et al. (2019) · eTransportation · doi:10.1016/j.etran.2019.100011 · Cited by 1,592
Wang, Y., Tian, J., Sun, Z., Wang, L., Xu, R., Li, M., & Chen, Z. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110015 · Cited by 1,377
Liu, H., Wei, Z., He, W., & Zhao, J. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.08.016 · Cited by 1,332
A critical review of battery thermal performance and liquid based battery thermal management
Wu, W., Wang, S., Wu, W., Chen, K., Hong, S., & Lai, Y. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.12.051 · Cited by 1,214
Lithium ion battery degradation: what you need to know
Edge, J. S., O’Kane, S., Prosser, R., Kirkaldy, N. D., Patel, A. N., Hales, A., Ghosh, A., Ai, W., Chen, J., Yang, J., et al. (2021) · Physical Chemistry Chemical Physics · doi:10.1039/d1cp00359c · Cited by 1,189
Jaguemont, J., Boulon, L., & Dubé, Y. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.11.034 · Cited by 1,188
Wang, Q., Jiang, B., Li, B., & Yan, Y. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.05.033 · Cited by 1,083
“It was first developed by Newman’s group [98, 99] based on a macro-homogeneous and isothermal model approach [100].”
Xiong, R., Li, L., & Tian, J. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.10.019 · Cited by 1,017
Critical Review on the Battery State of Charge Estimation Methods for Electric Vehicles
Xiong, R., Cao, J., Yu, Q., He, H., & Sun, F. (2018) · IEEE Access · doi:10.1109/access.2017.2780258 · Cited by 1,004
“proposed a P2D electrochemical model on the basis of its physical process [46], [47].”
BackgroundYang, X.-G., Leng, Y., Zhang, G., Ge, S., & Wang, C.-Y. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.05.110 · Cited by 948
Pinson, M. B., & Bazant, M. Z. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.044302jes · Cited by 946
A review of lithium deposition in lithium-ion and lithium metal secondary batteries
Li, Z., Huang, J., Yann Liaw, B., Metzler, V., & Zhang, J. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.12.099 · Cited by 938
Transport Properties of LiPF[sub 6]-Based Li-Ion Battery Electrolytes
Valo̸en, L. O., & Reimers, J. N. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1872737 · Cited by 935
Lithium-ion batteries – Current state of the art and anticipated developments
Armand, M., Axmann, P., Bresser, D., Copley, M., Edström, K., Ekberg, C., Guyomard, D., Lestriez, B., Novák, P., Petranikova, M., et al. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228708 · Cited by 888
Safety focused modeling of lithium-ion batteries: A review
Abada, S., Marlair, G., Lecocq, A., Petit, M., Sauvant-Moynot, V., & Huet, F. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.11.100 · Cited by 819
Safety issues and mechanisms of lithium-ion battery cell upon mechanical abusive loading: A review
Liu, B., Jia, Y., Yuan, C., Wang, L., Gao, X., Yin, S., & Xu, J. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.06.036 · Cited by 816
How, D. N. T., Hannan, M. A., Hossain Lipu, M. S., & Ker, P. J. (2019) · IEEE Access · doi:10.1109/access.2019.2942213 · Cited by 812
Development of First Principles Capacity Fade Model for Li-Ion Cells
Ramadass, P., Haran, B., Gomadam, P. M., White, R., & Popov, B. N. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1634273 · Cited by 794
Dynamic lithium-ion battery model for system simulation
Gao, L., Liu, S., & Dougal, R. A. (2002) · IEEE Transactions on Components and Packaging Technologies · doi:10.1109/tcapt.2002.803653 · Cited by 794
“dynamics of these batteries [9]–[14], these models are generally not suitable for system-level design exercises.”
BackgroundCalendar and cycle life study of Li(NiMnCo)O2-based 18650 lithium-ion batteries
Ecker, M., Nieto, N., Käbitz, S., Schmalstieg, J., Blanke, H., Warnecke, A., & Sauer, D. U. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.09.143 · Cited by 782
Predicting the state of charge and health of batteries using data-driven machine learning
Ng, M.-F., Zhao, J., Yan, Q., Conduit, G. J., & Seh, Z. W. (2020) · Nature Machine Intelligence · doi:10.1038/s42256-020-0156-7 · Cited by 793
A review on electric vehicle battery modelling: From Lithium-ion toward Lithium–Sulphur
Fotouhi, A., Auger, D. J., Propp, K., Longo, S., & Wild, M. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.009 · Cited by 780
Power and thermal characterization of a lithium-ion battery pack for hybrid-electric vehicles
Smith, K., & Wang, C.-Y. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.01.038 · Cited by 763
Discharge Model for the Lithium Iron-Phosphate Electrode
Srinivasan, V., & Newman, J. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1785012 · Cited by 730
Self-citationTheory of Chemical Kinetics and Charge Transfer based on Nonequilibrium Thermodynamics
Bazant, M. Z. (2013) · Accounts of Chemical Research · doi:10.1021/ar300145c · Cited by 724
Overview of batteries and battery management for electric vehicles
Liu, W., Placke, T., & Chau, K. T. (2022) · Energy Reports · doi:10.1016/j.egyr.2022.03.016 · Cited by 715
Modeling and Simulation of Lithium-Ion Batteries from a Systems Engineering Perspective
Northrop, P. W. C., De, S., Braatz, R. D., Ramadesigan, V., Northrop, P. W. C., Santhanagopalan, S., & Subramaniana, V. R. (2011) · Cited by 748
Yang, Y., Zheng, G., Misra, S., Nelson, J., Toney, M. F., & Cui, Y. (2012) · Journal of the American Chemical Society · doi:10.1021/ja3052206 · Cited by 718
Battery Energy Storage System (BESS) and Battery Management System (BMS) for Grid-Scale Applications
Lawder, M. T., Suthar, B., Northrop, P. W. C., De, S., Hoff, C. M., Leitermann, O., Crow, M. L., Santhanagopalan, S., & Subramanian, V. R. (2014) · Proceedings of the IEEE · doi:10.1109/jproc.2014.2317451 · Cited by 713
“Research is being done to continuously update the circuit-based parameters using current and voltage data to improve accuracy [31].”
BackgroundMethodInfluentialKear, G., Shah, A. A., & Walsh, F. C. (2012) · International Journal of Energy Research · doi:10.1002/er.1863 · Cited by 705
“Despite this early activity, modelling of redox flow batteries is not a well‐developed area, particularly in contrast to static batteries [96,97] and fuel cells [98,99].”
BackgroundRadin, M. D., Hy, S., Sina, M., Fang, C., Liu, H., Vinckeviciute, J., Zhang, M., Whittingham, M. S., Meng, Y. S., & Van der Ven, A. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602888 · Cited by 677
Zheng, H., Li, J., Song, X., Liu, G., & Battaglia, V. S. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.03.161 · Cited by 674
Machine learning pipeline for battery state-of-health estimation
Roman, D., Saxena, S., Robu, V., Pecht, M., & Flynn, D. (2021) · Nature Machine Intelligence · doi:10.1038/s42256-021-00312-3 · Cited by 660
“[48] can also be regarded as a data augmentation policy.”
BackgroundA review on battery thermal management in electric vehicle application
Xia, G., Cao, L., & Bi, G. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.09.046 · Cited by 641
Theory of Chemical Kinetics and Charge Transfer based on Nonequilibrium ThermodynamicsPreprint
Bazant, M. Z. (2013) · DSpace@MIT (Massachusetts Institute of Technology) · Cited by 645
Optimizing Areal Capacities through Understanding the Limitations of Lithium-Ion Electrodes
Gallagher, K. G., Trask, S. E., Bauer, C., Woehrle, T., Lux, S. F., Tschech, M., Lamp, P., Polzin, B. J., Ha, S., Long, B., et al. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0321602jes · Cited by 646
Li-Ion Cell Operation at Low Temperatures
Ji, Y., Zhang, Y., & Wang, C.-Y. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.047304jes · Cited by 640
Li, J., Adewuyi, K., Lotfi, N., Landers, R. G., & Park, J. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.01.011 · Cited by 623
Multi-scale computation methods: Their applications in lithium-ion battery research and development
Shi, S., Gao, J., Liu, Y., Zhao, Y., Wu, Q., Ju, W., Ouyang, C., & Xiao, R. (2016) · Chinese Physics B · doi:10.1088/1674-1056/25/1/018212 · Cited by 615
Chen, C.-H., Brosa Planella, F., O’Regan, K., Gastol, D., Widanage, W. D., & Kendrick, E. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab9050 · Cited by 610
Review of simplified Pseudo-two-Dimensional models of lithium-ion batteries
Jokar, A., Rajabloo, B., Désilets, M., & Lacroix, M. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.07.036 · Cited by 592
Algorithms for Advanced Battery-Management Systems
(2010) · IEEE Control Systems · doi:10.1109/mcs.2010.936293 · Cited by 594
The importance of the lithium ion transference number in lithium/polymer cells
Doyle, M., Fuller, T. F., & Newman, J. (1994) · Electrochimica Acta · doi:10.1016/0013-4686(94)85091-7 · Cited by 553
Self-citationZou, C., Zhang, L., Hu, X., Wang, Z., Wik, T., & Pecht, M. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.04.033 · Cited by 515
“In the fractional case, the dimension of Q is F cm$2 sa$1 [14,15].”
BackgroundThe Butler-Volmer equation in electrochemical theory: Origins, value, and practical application
Dickinson, E. J. F., & Wain, A. J. (2020) · Journal of Electroanalytical Chemistry · doi:10.1016/j.jelechem.2020.114145 · Cited by 511
Lu, X., Bertei, A., Finegan, D. P., Tan, C., Daemi, S. R., Weaving, J. S., O’Regan, K. B., Heenan, T. M. M., Hinds, G., Kendrick, E., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-15811-x · Cited by 513
A dynamic performance model for redox-flow batteries involving soluble species
Shah, A. A., Watt-Smith, M. J., & Walsh, F. C. (2008) · Electrochimica Acta · doi:10.1016/j.electacta.2008.05.067 · Cited by 504
Tortuosity Anisotropy in Lithium‐Ion Battery Electrodes
Ebner, M., Chung, D., García, R. E., & Wood, V. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201301278 · Cited by 495
Zheng, Y., Ouyang, M., Han, X., Lu, L., & Li, J. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.11.094 · Cited by 490
Heating strategies for Li-ion batteries operated from subzero temperatures
Ji, Y., & Wang, C. Y. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.03.147 · Cited by 485
Li, X., Yuan, C., Li, X., & Wang, Z. (2020) · Energy · doi:10.1016/j.energy.2019.116467 · Cited by 482
Lithium Plating Mechanism, Detection, and Mitigation in Lithium-Ion Batteries
Lin, X., Khosravinia, K., Hu, X., Li, J., & Lu, W. (2021) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2021.100953 · Cited by 490
“Newman [204] and co-workers introduced the first battery physics-based model.”
BackgroundMethodInfluentialCycle Life Modeling of Lithium-Ion Batteries
Ning, G., & Popov, B. N. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1787631 · Cited by 474
Yang, N., Zhang, X., Li, G., & Hua, D. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.01.049 · Cited by 467
“Therefore, the electrochemical performance of the battery can be calculated by a pseudo 2D electrochemical model [21,22].”
MethodKumar, R. R., Bharatiraja, C., Udhayakumar, K., Devakirubakaran, S., Sekar, K. S., & Mihet-Popa, L. (2023) · IEEE Access · doi:10.1109/access.2023.3318121 · Cited by 471
“[24] introduced a Pseudo-2-D (P2D) electrochemical model, however because there are so many nonlinear equations, it takes longer to simulate and It reduces the effectiveness of its computation for BMS applications.”
BackgroundCheng, Y.-T., & Verbrugge, M. W. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.01.021 · Cited by 469
Seaman, A., Dao, T.-S., & McPhee, J. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.057 · Cited by 453
“This 1D model considers dynamics along only one axis (the horizontal x -axis shown in Figure C.7) and neglects the dynamics along the remaining two axes ( y -axis and z -axis) [62, 63, 66–70].”
Thermal modeling and design considerations of lithium-ion batteries
Al Hallaj, S., Maleki, H., Hong, J. S., & Selman, J. R. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(99)00178-0 · Cited by 454
Control oriented 1D electrochemical model of lithium ion battery
Smith, K. A., Rahn, C. D., & Wang, C.-Y. (2007) · Energy Conversion and Management · doi:10.1016/j.enconman.2007.03.015 · Cited by 445
“[14,15] and applied in Ref.”
MethodMathematical modeling of the capacity fade of Li-ion cells
Ramadass, P., Haran, B., White, R., & Popov, B. N. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00531-7 · Cited by 446
Huria, T., Ceraolo, M., Gazzarri, J., & Jackey, R. (2012) · 2012 IEEE International Electric Vehicle Conference · doi:10.1109/ievc.2012.6183271 · Cited by 470
Electro-thermal modeling and experimental validation for lithium ion battery
Ye, Y., Shi, Y., Cai, N., Lee, J., & He, X. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.10.027 · Cited by 438
The use of mathematical modeling in the design of lithium/polymer battery systems
Doyle, M., & Newman, J. (1995) · Electrochimica Acta · doi:10.1016/0013-4686(95)00162-8 · Cited by 433
Self-citationA review on modeling of electro-chemo-mechanics in lithium-ion batteries
Zhao, Y., Stein, P., Bai, Y., Al-Siraj, M., Yang, Y., & Xu, B.-X. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.12.011 · Cited by 431
Direct in situ measurements of Li transport in Li-ion battery negative electrodes
Harris, S. J., Timmons, A., Baker, D. R., & Monroe, C. (2010) · Chemical Physics Letters · doi:10.1016/j.cplett.2009.12.033 · Cited by 434
Analysis of Electrochemical and Thermal Behavior of Li-Ion Cells
Srinivasan, V., & Wang, C. Y. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1526512 · Cited by 435
Multi-Domain Modeling of Lithium-Ion Batteries Encompassing Multi-Physics in Varied Length Scales
Kim, G.-H., Smith, K., Lee, K.-J., Santhanagopalan, S., & Pesaran, A. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3597614 · Cited by 431
Battery modeling for energy-aware system design
Rao, R., Vrudhula, S., & Rakhmatov, D. N. (2003) · Computer · doi:10.1109/mc.2003.1250886 · Cited by 422
Khateeb, S. A., Amiruddin, S., Farid, M., Selman, J. R., & Al-Hallaj, S. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.09.033 · Cited by 410
Dai, H., Jiang, B., Hu, X., Lin, X., Wei, X., & Pecht, M. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110480 · Cited by 405
Di Domenico, D., Stefanopoulou, A., & Fiengo, G. (2010) · Journal of Dynamic Systems, Measurement, and Control · doi:10.1115/1.4002475 · Cited by 401
Huang, J., Li, Z., Liaw, B. Y., & Zhang, J. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.01.073 · Cited by 399
Wu, B., Widanage, W. D., Yang, S., & Liu, X. (2020) · Energy and AI · doi:10.1016/j.egyai.2020.100016 · Cited by 396
“A more comprehensive approach to describing the performance of LIBs is through the use of continuum level physics models which were pi-oneered by Doyle, Fuller and Newman [15] .”
MethodCoupled electrochemical thermal modelling of a novel Li-ion battery pack thermal management system
Basu, S., Hariharan, K. S., Kolake, S. M., Song, T., Sohn, D. K., & Yeo, T. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.08.049 · Cited by 389
Quilty, C. D., Wu, D., Li, W., Bock, D. C., Wang, L., Housel, L. M., Abraham, A., Takeuchi, K. J., Marschilok, A. C., & Takeuchi, E. S. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00214 · Cited by 388
Review on the Battery Model and SOC Estimation Method
Zhou, W., Zheng, Y., Pan, Z., & Lu, Q. (2021) · Processes · doi:10.3390/pr9091685 · Cited by 394
“In order to meet the requirements of different discharge rates and real-time estimation of SOC, the P2D model is reasonably simplified to obtain other SP2D models [19–21].”
MethodInfluentialOnline internal short circuit detection for a large format lithium ion battery
Feng, X., Weng, C., Ouyang, M., & Sun, J. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.10.019 · Cited by 383
“The electrochemical model used in the et-ISC model is based on the Dualfoil or the pseudo-two-dimensional (P2D) model developed by Doyle, Fuller and Newman [44–46], and it is regarded as a benchmark criterion to evaluate the quality of other simplified models [47–50].”
BackgroundMethodYang, N., Zhang, X., Shang, B., & Li, G. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.12.079 · Cited by 378
A Comprehensive Review on the Characteristics and Modeling of Lithium-Ion Battery Aging
Vermeer, W., Chandra Mouli, G. R., & Bauer, P. (2022) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2021.3138357 · Cited by 385
“[5] and was based on the porous electrode model [6].”
MethodThermal Model for a Li-Ion Cell
Kumaresan, K., Sikha, G., & White, R. E. (2008) · Journal of The Electrochemical Society · doi:10.1149/1.2817888 · Cited by 382
Efficient Macro-Micro Scale Coupled Modeling of Batteries
Subramanian, V. R., Diwakar, V. D., & Tapriyal, D. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.2032427 · Cited by 381
Klass, V., Behm, M., & Lindbergh, G. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.07.116 · Cited by 381
Rechargeable Batteries of the Future—The State of the Art from a BATTERY 2030+ Perspective
Fichtner, M., Edström, K., Ayerbe, E., Berecibar, M., Bhowmik, A., Castelli, I. E., Clark, S., Dominko, R., Erakca, M., Franco, A. A., et al. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202102904 · Cited by 376
Cai, L., & White, R. E. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.03.017 · Cited by 377
Plug-in hybrid electric vehicle charge pattern optimization for energy cost and battery longevity
Bashash, S., Moura, S. J., Forman, J. C., & Fathy, H. K. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.07.001 · Cited by 375
Meng, J., Luo, G., Ricco, M., Swierczynski, M., Stroe, D.-I., & Teodorescu, R. (2018) · Applied Sciences · doi:10.3390/app8050659 · Cited by 370
“Support Vector Machine (SVM) has a more strictly mathematical proof and converges to an optimal solution faster than NN. Replacing experiential risk minimization to structural risk minimization makes the SVM more suitable for solving a small-sample-size problem.”
BackgroundA generalized cycle life model of rechargeable Li-ion batteries
Ning, G., White, R. E., & Popov, B. N. (2006) · Electrochimica Acta · doi:10.1016/j.electacta.2005.06.033 · Cited by 372
Smith, K., & Wang, C.-Y. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.03.050 · Cited by 373
Ping, P., Peng, R., Kong, D., Chen, G., & Wen, J. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.09.025 · Cited by 366
Thermal Modeling of Porous Insertion Electrodes
Thomas, K. E., & Newman, J. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1531194 · Cited by 356
Self-citationLegrand, N., Knosp, B., Desprez, P., Lapicque, F., & Raël, S. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.06.130 · Cited by 357
The novel state of charge estimation method for lithium battery using sliding mode observer
Kim, I.-S. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.09.006 · Cited by 359
Thermal modeling of cylindrical lithium ion battery during discharge cycle
Jeon, D. H., & Baek, S. M. (2011) · Energy Conversion and Management · doi:10.1016/j.enconman.2011.04.013 · Cited by 352
Dees, D. W., Kawauchi, S., Abraham, D. P., & Prakash, J. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.09.045 · Cited by 353
Toward Low-Cost, High-Energy Density, and High-Power Density Lithium-Ion Batteries
Li, J., Du, Z., Ruther, R. E., AN, S. J., David, L. A., Hays, K., Wood, M., Phillip, N. D., Sheng, Y., Mao, C., et al. (2017) · JOM · doi:10.1007/s11837-017-2404-9 · Cited by 350
Metadata
- Authors
- Doyle, M., Fuller, T. F., & Newman, J.
- Affiliations
- Lawrence Berkeley National Laboratory (US)
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 1993-06-01
- Volume
- 140
- Issue
- 6
- Pages
- 1526-1533
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2113449668
- Cited by
- 4,328
- References
- 13
- Citations by year
- 2026: 466 · 2025: 496 · 2024: 401 · 2023: 374 · 2022: 303 · 2021: 306 · 2020: 288 · 2019: 212 · 2018: 190 · 2017: 183 · 2016: 165 · 2015: 150 · 2014: 150 · 2013: 144 · 2012: 109
- FWCI
- 6.42
- Type
- journal article
- Language
- en
- Open access
- bronze
- doi.org
- Licence
- iopscience.iop.org/page/copyright (vor, 9685 d)
- iopscience.iop.org/info/page/text-and-data-mining (tdm, 9685 d)
- Locations
- Journal of The Electrochemical Society (publishedVersion)
- Funders
- U.S. Department of Energy
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Battery Materials
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Battery Materials and Technologies
- Physical Sciences › Engineering › Automotive Engineering › Battery Modeling and Management
- Keywords
- lithium batteries, solid polymer electrolytes, concentrated solution theory, lithium metal anode, superposition method, electrolyte transport, composite cathode, lithium salts
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.