Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell
Open accessThe DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
Abstract
The galvanostatic charge and discharge of a lithium anode/solid polymer separator/insertion cathode cell is modeled using concentrated solution theory. The model is general enough to include a wide range of polymeric separator materials, lithium salts, and composite insertion cathodes. Insertion of lithium into the active cathode material is simulated using superposition, thus greatly simplifying the numerical calculations. Variable physical properties are permitted in the model. The results of a simulation of the charge/discharge behavior of the system are presented. Criteria are established to assess the importance of diffusion in the solid matrix and transport in the electrolyte. Consideration is also given to various procedures for optimization of the utilization of active cathode material.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“According to their outcomes, KF output is superior to RLS [91].”
In the citing paper
“Electrochemical models are somewhat more accurate than the classical acoustic ones as being based on the description of the battery's inner chemical processes such as lithium ions diffusion of within the electrodes and the electrolyte [31].”
From Review Paper for SOC Estimation Techniques: Challenges and Future Areas for Improvement (2024) · cites this paper as [31]
Citations
Cites
(1996) · Journal of Power Sources · doi:10.1016/s0378-7753(97)81054-3 · Cited by 463
Experimental Determination of the Transport Number of Water in Nafion 117 Membrane
Fuller, T. F., & Newman, J. (1992) · Journal of The Electrochemical Society · doi:10.1149/1.2069407 · Cited by 278
Self-citationAssessment of Polymer‐Electrolyte Batteries for EV and Ambient Temperature Applications
Gauthier, M., Fauteux, D., Vassort, G., Bélanger, A., Duval, M., Ricoux, P., Chabagno, J. M., Muller, D. A., Rigaud, P., Armand, M. B., et al. (1985) · Journal of The Electrochemical Society · doi:10.1149/1.2114112 · Cited by 156
Formation of a passivating film at the lithium-PEO-LiCF3SO3 interface
Fauteux, D. (1985) · Solid State Ionics · doi:10.1016/0167-2738(85)90061-x · Cited by 134
The fabrication and performance of all solid state polymer-based rechargeable lithium cells
Hooper, A. J., & North, J. M. (1983) · Solid State Ionics · doi:10.1016/0167-2738(83)90146-7 · Cited by 124
Laminar Boundary Layer Flows with Surface Reactions
Acrivos, A., & Chambré, P. L. (1957) · Industrial & Engineering Chemistry · doi:10.1021/ie50570a037 · Cited by 100
Status of rechargeable positive electrodes for ambient temperature lithium batteries
Abraham, K. M. (1981) · Journal of Power Sources · doi:10.1016/0378-7753(81)80058-4 · Cited by 88
A Polymeric Electrolyte Rechargeable Lithium Battery
Bonino, F., Ottaviani, M., Scrosati, B., et al. (1988) · Journal of The Electrochemical Society · doi:10.1149/1.2095538 · Cited by 72
Lithium Electrode/PEO‐Based Polymer Electrolyte Interface Behavior Between 60° and 120°C
Fauteux, D. (1988) · Journal of The Electrochemical Society · doi:10.1149/1.2096244 · Cited by 64
Performance of polymer electrolyte cells at +25 to +100°C
Munshi, M. (1988) · Solid State Ionics · doi:10.1016/0167-2738(88)90244-5 · Cited by 62
Cited by
Items 101–200 of 1,016
Wei, Z., Zhao, J., He, H., Ding, G., Cui, H., & Liu, L. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.229462 · Cited by 348
Smith, K. A., Rahn, C. D., & Wang, C.-Y. (2010) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2009.2027023 · Cited by 346
“[5], [6], derived from porous electrode and concentrated solution theories, captures relevant solid-state and electrolyte diffusion dynamics and accurately predicts current/voltage response.”
BackgroundAn Overview on Thermal Safety Issues of Lithium-ion Batteries for Electric Vehicle Application
Zhang, J., Zhang, L., Sun, F., & Wang, Z. (2018) · IEEE Access · doi:10.1109/access.2018.2824838 · Cited by 344
“[8] simulated the galvanostatic charge and discharge of LIBs using the concentrated solution theory to describe the transport properties in the electrolyte.”
MethodHeterogeneous damage in Li-ion batteries: Experimental analysis and theoretical modeling
Xu, R., Yang, Y., Yin, F., Liu, P., Cloetens, P., Liu, Y., Lin, F., & Zhao, K. (2019) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2019.05.003 · Cited by 345
Mathematical modeling of lithium-ion and nickel battery systems
Gomadam, P. M., Weidner, J. W., Dougal, R. A., & White, R. E. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00190-8 · Cited by 344
Microstructural Modeling and Design of Rechargeable Lithium-Ion Batteries
Garcı́a, R. E., Chiang, Y.-M., Craig Carter, W., Limthongkul, P., & Bishop, C. M. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1836132 · Cited by 341
Singh, G. K., Ceder, G., & Bazant, M. Z. (2008) · Electrochimica Acta · doi:10.1016/j.electacta.2008.03.083 · Cited by 338
Nonequilibrium Thermodynamics of Porous Electrodes
Ferguson, T. R., & Bazant, M. Z. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.048212jes · Cited by 333
Tsai, P.-C., Wen, B., Wolfman, M., Choe, M.-J., Pan, M. S., Su, L., Thornton, K., Cabana, J., & Chiang, Y.-M. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00001h · Cited by 325
Safety modelling and testing of lithium-ion batteries in electrified vehicles
Deng, J., Bae, C., Marcicki, J., Masias, A., & Miller, T. (2018) · Nature Energy · doi:10.1038/s41560-018-0122-3 · Cited by 330
An analytical model for predicting the remaining battery capacity of lithium-ion batteries
Rong, P., & Pedram, M. (2006) · IEEE Transactions on Very Large Scale Integration (VLSI) Systems · doi:10.1109/tvlsi.2006.876094 · Cited by 321
“There already exist tools that allow for detailed analysis of the battery at the microscopic scale [5, 8].”
BackgroundMethodInfluentialQuantifying the factors limiting rate performance in battery electrodes
Tian, R., Park, S.-H., King, P. J., Cunningham, G., Coelho, J., Nicolosi, V., & Coleman, J. N. (2019) · Nature Communications · doi:10.1038/s41467-019-09792-9 · Cited by 326
Adaikkappan, M., & Sathiyamoorthy, N. (2022) · International Journal of Energy Research · doi:10.1002/er.7339 · Cited by 324
On state-of-charge determination for lithium-ion batteries
Li, Z., Huang, J., Liaw, B. Y., & Zhang, J. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.03.001 · Cited by 317
A two-dimensional modeling of a lithium-polymer battery
Kwon, K. H., Shin, C. B., Kang, T. H., & Kim, C.-S. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.03.012 · Cited by 319
Chen, K.-H., Namkoong, M. J., Goel, V., Yang, C., Kazemiabnavi, S., Mortuza, S. M., Kazyak, E., Mazumder, J., Thornton, K., Sakamoto, J., et al. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228475 · Cited by 313
Battery-Driven System Design: A New Frontier in Low Power Design
Lahiri, K., Raghunathan, A., Dey, S., & Panigrahi, D. (2002) · doi:10.5555/832284.835514 · Cited by 316
Fang, W., Kwon, O. J., & Wang, C.-Y. (2010) · International Journal of Energy Research · doi:10.1002/er.1652 · Cited by 314
“The diffusional conductivity, k D , is given by concentrated solution theory [3], as”
MethodDu, Z., Wood, D. L., Daniel, C., Kalnaus, S., & Li, J. (2017) · Journal of Applied Electrochemistry · doi:10.1007/s10800-017-1047-4 · Cited by 310
Air and PCM cooling for battery thermal management considering battery cycle life
Chen, F., Huang, R., Wang, C., Yu, X., Liu, H., Wu, Q., Qian, K., & Bhagat, R. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.115154 · Cited by 310
“In this study, a one-dimensional electrochemical model developed by Doyle and Newman [22,23] is used to predict heat generation of LIBs.”
MethodKim, T., & Qiao, W. (2011) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2011.2167014 · Cited by 312
Hao, H., Hutter, T., Boyce, B. L., Watt, J., Liu, P., & Mitlin, D. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00838 · Cited by 314
Tippmann, S., Walper, D., Balboa, L., Spier, B., & Bessler, W. G. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.12.022 · Cited by 311
Modeling for the scale-up of a lithium-ion polymer battery
Kim, U. S., Shin, C. B., & Kim, C.-S. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.10.019 · Cited by 308
Siddique, A. R. M., Mahmud, S., & Heyst, B. V. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.08.094 · Cited by 310
Sturm, J., Rheinfeld, A., Zilberman, I., Spingler, F. B., Kosch, S., Frie, F., & Jossen, A. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.11.043 · Cited by 300
“The electrochemical model used in this work is the widely applied newmantype p2D model [22] which is based on porous electrode theory, reaction kinetics and concentrated solution theory [66].”
MethodModeling diffusion-induced stress in nanowire electrode structures
Deshpande, R., Cheng, Y.-T., & Verbrugge, M. W. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.02.021 · Cited by 303
Identifying Capacity Limitations in the Li/Oxygen Battery Using Experiments and Modeling
Albertus, P., Girishkumar, G., McCloskey, B., Sánchez-Carrera, R. S., Kozinsky, B., Christensen, J., & Luntz, A. C. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3527055 · Cited by 301
Forman, J. C., Moura, S. J., Stein, J. L., & Fathy, H. K. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.03.009 · Cited by 299
Panchal, S., Mathew, M., Fraser, R., & Fowler, M. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.02.046 · Cited by 295
Ecker, M., Tran, T. K. D., Dechent, P., Käbitz, S., Warnecke, A., & Sauer, D. U. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0551509jes · Cited by 298
Shearing, P. R., Howard, L. E., Jørgensen, P. S., Brandon, N. P., & Harris, S. J. (2010) · Electrochemistry Communications · doi:10.1016/j.elecom.2009.12.038 · Cited by 296
Guo, P., Cheng, Z., & Yang, L. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.11.072 · Cited by 296
Ren, D., Smith, K., Guo, D., Han, X., Feng, X., Lu, L., Ouyang, M., & Li, J. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0661810jes · Cited by 295
Electrochemical Model Based Observer Design for a Lithium-Ion Battery
Klein, R., Chaturvedi, N. A., Christensen, J., Ahmed, J., Findeisen, R., & Kojic, A. (2013) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2011.2178604 · Cited by 291
Rahman, M. A., Anwar, S., & Izadian, A. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.12.083 · Cited by 289
Coupled thermal–electrochemical modelling of uneven heat generation in lithium-ion battery packs
Wu, B., Yufit, V., Marinescu, M., Offer, G. J., Martinez-Botas, R. F., & Brandon, N. P. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.05.164 · Cited by 286
Qin, P., Liao, M., Zhang, D., Liu, Y., Sun, J., & Wang, Q. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.05.084 · Cited by 284
Nickol, A., Schied, T., Heubner, C., Schneider, M., Michaelis, A., Bobeth, M., & Cuniberti, G. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab9404 · Cited by 281
A review on lithium-ion power battery thermal management technologies and thermal safety
An, Z., Jia, L., Ding, Y., Dang, C., & Li, X. (2017) · Journal of Thermal Science · doi:10.1007/s11630-017-0955-2 · Cited by 274
A review on the liquid cooling thermal management system of lithium-ion batteries
Wu, C., Sun, Y., Tang, H., Zhang, S., Yuan, W., Zhu, L., & Tang, Y. (2024) · Applied Energy · doi:10.1016/j.apenergy.2024.124173 · Cited by 277
Key challenges for a large-scale development of battery electric vehicles: A comprehensive review
Lebrouhi, B. E., Khattari, Y., Lamrani, B., Maaroufi, M., Zeraouli, Y., & Kousksou, T. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.103273 · Cited by 276
A review of thermal runaway prevention and mitigation strategies for lithium-ion batteries
Shahid, S., & Agelin-Chaab, M. (2022) · Energy Conversion and Management: X · doi:10.1016/j.ecmx.2022.100310 · Cited by 267
Jongerden, M. R., & Haverkort, B. R. (2009) · IET Software · doi:10.1049/iet-sen.2009.0001 · Cited by 272
“Doyle, Fuller and Newman developed an electrochemical model for lithium and lithiumion cells [4, 5, 6].”
BackgroundMethodThick electrodes for Li-ion batteries: A model based analysis
Danner, T., Singh, M., Hein, S., Kaiser, J., Hahn, H., & Latz, A. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.09.143 · Cited by 270
“Table 2: Constitutive equations of 1+1D [26] and 3D [10] Li-ion battery models used in this work.”
BackgroundMethodRuess, R., Schweidler, S., Hemmelmann, H., Conforto, G., Bielefeld, A., Weber, D. A., Sann, J., Elm, M. T., & Janek, J. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab9a2c · Cited by 271
Effects of inhomogeneities - nanoscale to mesoscale - on the durability of Li-Ion batteries
Harris, S. J., & Lu, P. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp311431z · Cited by 271
Bizeray, A. M., Zhao, S., Duncan, S. R., & Howey, D. A. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.07.019 · Cited by 269
“Physics-based models have been widely used for battery design [5, 6, 7, 8] but are usually too computationally intensive for the limited resources of an embedded BMS.”
BackgroundMethodSubramanian, V. R., Boovaragavan, V., Ramadesigan, V., & Arabandi, M. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3065083 · Cited by 270
Dynamic spatial progression of isolated lithium during battery operations
Liu, F., Xu, R., Wu, Y., Boyle, D. T., Yang, A., Xu, J., Zhu, Y., Ye, Y., Yu, Z., Zhang, Z., et al. (2021) · Nature · doi:10.1038/s41586-021-04168-w · Cited by 267
Schmidt, A. P., Bitzer, M., Imre, Á. W., & Guzzella, L. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.02.029 · Cited by 266
Li, W., Fan, Y., Ringbeck, F., Jöst, D., Han, X., Ouyang, M., & Sauer, D. U. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228534 · Cited by 265
Non-isothermal modelling of the all-vanadium redox flow battery
Al-Fetlawi, H., Shah, A. A., & Walsh, F. C. (2009) · Electrochimica Acta · doi:10.1016/j.electacta.2009.08.009 · Cited by 266
Perspective—Combining Physics and Machine Learning to Predict Battery Lifetime
Aykol, M., Gopal, C. B., Anapolsky, A., Herring, P. K., van Vlijmen, B., Berliner, M. D., Bazant, M. Z., Braatz, R. D., Chueh, W. C., & Storey, B. D. (2021) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/abec55 · Cited by 264
Han, X., Ouyang, M., Lu, L., & Li, J. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.08.089 · Cited by 258
Xu, M., Zhang, Z., Wang, X., Jia, L., & Yang, L. (2015) · Energy · doi:10.1016/j.energy.2014.11.073 · Cited by 262
Batteries for Electric and Hybrid-Electric Vehicles
Cairns, E. J., & Albertus, P. (2010) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-073009-100942 · Cited by 263
Cai, L., & White, R. E. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3049347 · Cited by 259
Han, X., Ouyang, M., Lu, L., & Li, J. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.12.101 · Cited by 258
Zhang, T., & Ran, F. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202010041 · Cited by 260
Energy efficient battery management
Chiasserini, C.-F., & Rao, R. R. (2001) · IEEE Journal on Selected Areas in Communications · doi:10.1109/49.932692 · Cited by 257
Energy management for battery-powered embedded systems
Rakhmatov, D., & Vrudhula, S. (2003) · ACM Transactions on Embedded Computing Systems · doi:10.1145/860176.860179 · Cited by 257
Intercalation and exfoliation chemistries of transition metal dichalcogenides
Zhang, Q., Mei, L., Cao, X., Tang, Y., & Zeng, Z. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta03727c · Cited by 257
Effect of external pressure and internal stress on battery performance and lifespan
Li, R., Li, W., Singh, A., Ren, D., Hou, Z., & Ouyang, M. (2022) · Energy Storage Materials · doi:10.1016/j.ensm.2022.07.034 · Cited by 254
Two-Dimensional Modeling of Lithium Deposition during Cell Charging
Tang, M., Albertus, P., & Newman, J. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3095513 · Cited by 255
Self-citationMarcicki, J., Canova, M., Conlisk, A. T., & Rizzoni, G. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.12.120 · Cited by 253
Colclasure, A. M., Dunlop, A. R., Trask, S. E., Polzin, B. J., Jansen, A. N., & Smith, K. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0451908jes · Cited by 252
Elmahallawy, M., Elfouly, T., Alouani, A., & Massoud, A. M. (2022) · IEEE Access · doi:10.1109/access.2022.3221137 · Cited by 253
“[45] proposed the full-order electrochemical model (white box model or physical model),”
Local Tortuosity Inhomogeneities in a Lithium Battery Composite Electrode
Kehrwald, D., Shearing, P. R., Brandon, N. P., Sinha, P. K., & Harris, S. J. (2011) · Journal of The Electrochemical Society · doi:10.1149/2.079112jes · Cited by 250
Battery-driven system design: a new frontier in low power design
Lahiri, K., Raghunathan, A., Dey, S., & Panigrahi, D. (2003) · Proceedings of ASP-DAC/VLSI Design 2002. 7th Asia and South Pacific Design Automation Conference and 15h International Conference on VLSI Design · doi:10.1109/aspdac.2002.994932 · Cited by 250
“The effect of this phenomenon is a dependency between battery capacity and the rate at which it is discharged [18].”
BackgroundMethodLi, W., Cao, D., Jöst, D., Ringbeck, F., Kuipers, M., Frie, F., & Sauer, D. U. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.115104 · Cited by 249
Forman, J. C., Bashash, S., Stein, J. L., & Fathy, H. K. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3519059 · Cited by 247
Liu, J., Yadav, S., Salman, M., Chavan, S., & Kim, S. C. (2024) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2023.124748 · Cited by 247
Thermal analysis of a cylindrical lithium-ion battery
Zhang, X. (2011) · Electrochimica Acta · doi:10.1016/j.electacta.2010.10.054 · Cited by 245
Bartlett, A., Marcicki, J., Onori, S., Rizzoni, G., Yang, X. G., & Miller, T. (2015) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2015.2446947 · Cited by 244
“These models are based on the first principles in porous electrode theory [11] and therefore have the potential to predict cell performance more accurately, as well as provide more information about the internal battery states such as lithium concentrations and reaction overpotentials.”
BackgroundZeng, Y., Chalise, D., Lubner, S. D., Kaur, S., & Prasher, R. S. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2021.06.008 · Cited by 239
Liao, Y., Zhang, H., Peng, Y., Hu, Y., Liang, J., Gong, Z., Wei, Y., & Yang, Y. (2024) · Advanced Energy Materials · doi:10.1002/aenm.202304295 · Cited by 244
Review—Dynamic Models of Li-Ion Batteries for Diagnosis and Operation: A Review and Perspective
Krewer, U., Röder, F., Harinath, E., Braatz, R. D., Bedürftig, B., & Findeisen, R. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.1061814jes · Cited by 242
Lin, Q., Wang, J., Xiong, R., Shen, W., & He, H. (2019) · Energy · doi:10.1016/j.energy.2019.06.128 · Cited by 242
Wassiliadis, N., Schneider, J., Frank, A., Wildfeuer, L., Lin, X., Jossen, A., & Lienkamp, M. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.103306 · Cited by 242
In Situ Measurement of Radial Temperature Distributions in Cylindrical Li-Ion Cells
Zhang, G., Cao, L., Ge, S., Wang, C.-Y., Shaffer, C. E., & Rahn, C. D. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0051410jes · Cited by 238
Wang, Y., Wang, L., Li, M., & Chen, Z. (2020) · eTransportation · doi:10.1016/j.etran.2020.100064 · Cited by 240
DOYLE, M., & NEWMAN, J. (1997) · Journal of Applied Electrochemistry · doi:10.1023/a:1018481030499 · Cited by 239
Self-citationTheoretical Analysis of Stresses in a Lithium Ion Cell
Renganathan, S., Sikha, G., Santhanagopalan, S., & White, R. E. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3261809 · Cited by 237
Usseglio-Viretta, F. L. E., Colclasure, A., Mistry, A. N., Claver, K. P. Y., Pouraghajan, F., Finegan, D. P., Heenan, T. M. M., Abraham, D., Mukherjee, P. P., Wheeler, D., et al. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0731814jes · Cited by 238
Ge, H., Aoki, T., Ikeda, N., Suga, S., Isobe, T., Li, Z., Tabuchi, Y., & Zhang, J. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0461706jes · Cited by 236
Lai, Y., Du, S., Ai, L., Ai, L., Cheng, Y., Tang, Y., & Jia, M. (2015) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2015.07.079 · Cited by 234
Jaguemont, J., Boulon, L., & Dube, Y. (2016) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2015.2391053 · Cited by 238
“They can be categorized as electrochemical [28], [29], empirical [30], [31] and semi-empirical [32]–[34].”
BackgroundLithium-ion battery state of charge estimation with a Kalman Filter based on a electrochemical model
Di Domenico, D., Fiengo, G., & Stefanopoulou, A. (2008) · 2008 IEEE International Conference on Control Applications · doi:10.1109/cca.2008.4629639 · Cited by 235
“Since the more complete models are based on electrochemistry laws [4], [15], [18], a SOC estimation based on these models can improve this precision.”
MethodZhu, J. G., Sun, Z. C., Wei, X. Z., & Dai, H. F. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.10.182 · Cited by 233
Analysis of the Polarization in a Li-Ion Battery Cell by Numerical Simulations
Nyman, A., Zavalis, T. G., Elger, R., Behm, M., & Lindbergh, G. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3486161 · Cited by 235
Mathematical modeling of secondary lithium batteries
Botte, G. G., Subramanian, V. R., & White, R. E. (2000) · Electrochimica Acta · doi:10.1016/s0013-4686(00)00340-6 · Cited by 235
Model based identification of aging parameters in lithium ion batteries
Prasad, G. K., & Rahn, C. D. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.01.041 · Cited by 234
Multiphase Porous Electrode Theory
Smith, R. B., & Bazant, M. Z. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0171711jes · Cited by 233
Qu, Z. G., Li, W. Q., & Tao, W. Q. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2013.12.136 · Cited by 230
Modeling Diffusion-Induced Stress in Li-Ion Cells with Porous Electrodes
Christensen, J. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3269995 · Cited by 233
Ke, X., Wang, Y., Ren, G., & Yuan, C. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.08.029 · Cited by 231
Zhou, H., Zhou, F., Xu, L., Kong, J., & QingxinYang (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.11.116 · Cited by 230
Design and Optimization of a Natural Graphite/Iron Phosphate Lithium-Ion Cell
Srinivasan, V., & Newman, J. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1785013 · Cited by 227
Self-citationChemomechanics of Rechargeable Batteries: Status, Theories, and Perspectives
de Vasconcelos, L. S., Xu, R., Xu, Z., Zhang, J., Sharma, N., Shah, S. R., Han, J., He, X., Wu, X., Sun, H., et al. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00002 · Cited by 228
Metadata
- Authors
- Doyle, M., Fuller, T. F., & Newman, J.
- Affiliations
- Lawrence Berkeley National Laboratory (US)
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 1993-06-01
- Volume
- 140
- Issue
- 6
- Pages
- 1526-1533
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2113449668
- Cited by
- 4,328
- References
- 13
- Citations by year
- 2026: 466 · 2025: 496 · 2024: 401 · 2023: 374 · 2022: 303 · 2021: 306 · 2020: 288 · 2019: 212 · 2018: 190 · 2017: 183 · 2016: 165 · 2015: 150 · 2014: 150 · 2013: 144 · 2012: 109
- FWCI
- 6.42
- Type
- journal article
- Language
- en
- Open access
- bronze
- doi.org
- Licence
- iopscience.iop.org/page/copyright (vor, 9685 d)
- iopscience.iop.org/info/page/text-and-data-mining (tdm, 9685 d)
- Locations
- Journal of The Electrochemical Society (publishedVersion)
- Funders
- U.S. Department of Energy
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Battery Materials
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Battery Materials and Technologies
- Physical Sciences › Engineering › Automotive Engineering › Battery Modeling and Management
- Keywords
- lithium batteries, solid polymer electrolytes, concentrated solution theory, lithium metal anode, superposition method, electrolyte transport, composite cathode, lithium salts
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.