Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell
Open accessThe DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
Abstract
The galvanostatic charge and discharge of a lithium anode/solid polymer separator/insertion cathode cell is modeled using concentrated solution theory. The model is general enough to include a wide range of polymeric separator materials, lithium salts, and composite insertion cathodes. Insertion of lithium into the active cathode material is simulated using superposition, thus greatly simplifying the numerical calculations. Variable physical properties are permitted in the model. The results of a simulation of the charge/discharge behavior of the system are presented. Criteria are established to assess the importance of diffusion in the solid matrix and transport in the electrolyte. Consideration is also given to various procedures for optimization of the utilization of active cathode material.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“According to their outcomes, KF output is superior to RLS [91].”
In the citing paper
“Electrochemical models are somewhat more accurate than the classical acoustic ones as being based on the description of the battery's inner chemical processes such as lithium ions diffusion of within the electrodes and the electrolyte [31].”
From Review Paper for SOC Estimation Techniques: Challenges and Future Areas for Improvement (2024) · cites this paper as [31]
Citations
Cites
(1996) · Journal of Power Sources · doi:10.1016/s0378-7753(97)81054-3 · Cited by 463
Experimental Determination of the Transport Number of Water in Nafion 117 Membrane
Fuller, T. F., & Newman, J. (1992) · Journal of The Electrochemical Society · doi:10.1149/1.2069407 · Cited by 278
Self-citationAssessment of Polymer‐Electrolyte Batteries for EV and Ambient Temperature Applications
Gauthier, M., Fauteux, D., Vassort, G., Bélanger, A., Duval, M., Ricoux, P., Chabagno, J. M., Muller, D. A., Rigaud, P., Armand, M. B., et al. (1985) · Journal of The Electrochemical Society · doi:10.1149/1.2114112 · Cited by 156
Formation of a passivating film at the lithium-PEO-LiCF3SO3 interface
Fauteux, D. (1985) · Solid State Ionics · doi:10.1016/0167-2738(85)90061-x · Cited by 134
The fabrication and performance of all solid state polymer-based rechargeable lithium cells
Hooper, A. J., & North, J. M. (1983) · Solid State Ionics · doi:10.1016/0167-2738(83)90146-7 · Cited by 124
Laminar Boundary Layer Flows with Surface Reactions
Acrivos, A., & Chambré, P. L. (1957) · Industrial & Engineering Chemistry · doi:10.1021/ie50570a037 · Cited by 100
Status of rechargeable positive electrodes for ambient temperature lithium batteries
Abraham, K. M. (1981) · Journal of Power Sources · doi:10.1016/0378-7753(81)80058-4 · Cited by 88
A Polymeric Electrolyte Rechargeable Lithium Battery
Bonino, F., Ottaviani, M., Scrosati, B., et al. (1988) · Journal of The Electrochemical Society · doi:10.1149/1.2095538 · Cited by 72
Lithium Electrode/PEO‐Based Polymer Electrolyte Interface Behavior Between 60° and 120°C
Fauteux, D. (1988) · Journal of The Electrochemical Society · doi:10.1149/1.2096244 · Cited by 64
Performance of polymer electrolyte cells at +25 to +100°C
Munshi, M. (1988) · Solid State Ionics · doi:10.1016/0167-2738(88)90244-5 · Cited by 62
Cited by
Items 601–700 of 1,016
Xie, L. H., Huang, Y., & Lai, H. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.115599 · Cited by 93
Morasch, R., Keilhofer, J., Gasteiger, H. A., & Suthar, B. (2021) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ac1892 · Cited by 98
A composite electrode model for lithium-ion batteries with silicon/graphite negative electrodes
Ai, W., Kirkaldy, N., Jiang, Y., Offer, G. J., Wang, H., & Wu, B. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.231142 · Cited by 90
Chen, S., Zhang, Q., Wang, F., Wang, D., & He, Z. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.122128 · Cited by 100
A computational homogenization approach for Li-ion battery cells: Part 1 – formulation
Salvadori, A., Bosco, E., & Grazioli, D. (2013) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2013.08.010 · Cited by 89
Miranda, D., Costa, C. M., & Lanceros-Méndez, S. (2014) · Journal of Electroanalytical Chemistry · doi:10.1016/j.jelechem.2014.12.010 · Cited by 90
State-of-Charge estimation from a thermal–electrochemical model of lithium-ion batteries
Tang, S., Camacho-Solorio, L., Wang, Y., & Krstić, M. (2017) · Automatica · doi:10.1016/j.automatica.2017.06.030 · Cited by 88
“The widely studied electrochemical Doyle-Fuller-Newman (DFN) model has been shown to accurately describe the main phenomena in lithium-ion batteries [3,7].”
Forouzan, M. M., Mazzeo, B. A., & Wheeler, D. R. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.1281809jes · Cited by 95
Wu, B., & Lu, W. D. (2018) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2018.12.005 · Cited by 88
Xu, S., Chen, K., Dasgupta, N. P., Siegel, J. B., & Stefanopoulou, A. G. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0991914jes · Cited by 95
Computational modeling of Li-ion batteries
Grazioli, D., Magri, M., & Salvadori, A. (2016) · Computational Mechanics · doi:10.1007/s00466-016-1325-8 · Cited by 110
“It equals unity in the separator and is strictly smaller than one in the porous electrodes [97, 98].”
BackgroundMethodInfluentialLee, Y. K. (2019) · Energies · doi:10.3390/en12040658 · Cited by 91
“The model consists of four different equations that were coupled and solved simultaneously to describe the reaction mechanisms at the cathode [23]: (a) Two charge conservation equations for Li+ in the cathode and in the electrolyte.”
MethodMei, W., Li, H., Zhao, C., Sun, J., & Wang, Q. (2020) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.120319 · Cited by 96
Sturm, J., Frank, A., Rheinfeld, A., Erhard, S. V., & Jossen, A. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/abb40c · Cited by 91
Jiao, M., Wang, D., Yang, Y. J., & Liu, F. (2021) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2021.104407 · Cited by 91
Li, H., Saini, A., Liu, C., Yang, J., Wang, Y., Yang, T., Pan, C., Chen, L., & Jiang, H. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.102976 · Cited by 96
Yoshida, K., Tsuchiya, M., Tachikawa, N., Dokko, K., & Watanabe, M. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.050207jes · Cited by 91
On the Suitability of Electrochemical-Based Modeling for Lithium-Ion Batteries
Gu, R., Malysz, P., Yang, H., & Emadi, A. (2016) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2016.2571778 · Cited by 88
“To describe internal electrochemical processes in the lithium-ion battery, several coupled differential equations compose a nonlinear P2-D model [9]–[11].”
BackgroundModel-Based SEI Layer Growth and Capacity Fade Analysis for EV and PHEV Batteries and Drive Cycles
Lawder, M. T., Northrop, P. W. C., & Subramanian, V. R. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.1161412jes · Cited by 101
Smith, M., García, R. E., & Horn, Q. C. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3216000 · Cited by 90
Overview of Battery Models for Sustainable Power and Transport Applications
Tomašov, M., Kajanová, M., Braciník, P., & Motyka, D. (2019) · Transportation research procedia · doi:10.1016/j.trpro.2019.07.079 · Cited by 91
Fan, G. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228153 · Cited by 95
Lin, M., Zeng, X., & Wu, J. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.230063 · Cited by 87
Modeling the Solid Electrolyte Interphase: Machine Learning as a Game Changer?
Diddens, D., Appiah, W. A., Mabrouk, Y., Heuer, A., Vegge, T., & Bhowmik, A. (2022) · Advanced Materials Interfaces · doi:10.1002/admi.202101734 · Cited by 95
Predict the lifetime of lithium-ion batteries using early cycles: A review
Yang, M. Y., Sun, X., Liu, R., Wang, L., Zhao, F., & Mei, X. (2024) · Applied Energy · doi:10.1016/j.apenergy.2024.124171 · Cited by 99
Microstructural design considerations for Li-ion battery systems
Dillon, S. J., & Sun, K. (2012) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2012.03.002 · Cited by 88
From ROM of Electrochemistry to AI-Based Battery Digital and Hybrid Twin
Sancarlos, A., Cameron, M., Abel, A., Cueto, E., Duval, J. L., & Chinesta, F. (2020) · Archives of Computational Methods in Engineering · doi:10.1007/s11831-020-09404-6 · Cited by 96
“This package is written using Modelica and encapsulates all elements needed to run the model such as types, classes and functions.”
BackgroundMethodInfluentialKatrašnik, T., Mele, I., & Zelič, K. (2021) · Energy Conversion and Management · doi:10.1016/j.enconman.2021.114036 · Cited by 86
Li, C., Cui, N., Chang, L., Cui, Z., Yuan, H., & Zhang, C. (2022) · Applied Energy · doi:10.1016/j.apenergy.2022.118758 · Cited by 87
Thermal-electrochemical parameters of a high energy lithium-ion cylindrical battery
O’Regan, K. B., Planella, F. B., Widanage, W. D., & Kendrick, E. (2022) · Electrochimica Acta · doi:10.1016/j.electacta.2022.140700 · Cited by 115
Wang, S., Zhang, D., Li, C., Wang, J., Zhang, J., Cheng, Y., Mei, W., Cheng, S., Qin, P., Duan, Q., et al. (2022) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.119839 · Cited by 87
Roll-to-roll solvent-free manufactured electrodes for fast-charging batteries
Liu, Y., Gong, X., Podder, C., Wang, F., Li, Z., Liu, J., Fu, J., Ma, X., Vanaphuti, P., Wang, R., et al. (2023) · Joule · doi:10.1016/j.joule.2023.04.006 · Cited by 96
Effect of thermal gradients on inhomogeneous degradation in lithium-ion batteries
Shen, L., Zhang, C., Zhao, Y., Offer, G. J., & Marinescu, M. (2023) · Communications Engineering · doi:10.1038/s44172-023-00124-w · Cited by 102
“These models are usually based on the either the Doyle-Fuller-Newman (DFN) model 31 , or the pseudo-two-dimensional model (P2D) 32 , or on the single particle model (SPM) 33 .”
MethodA multiphysics model for the in situ stress analysis of the separator in a lithium-ion battery cell
Wu, W., Xiao, X., Huang, X., & Yan, S. (2013) · Computational Materials Science · doi:10.1016/j.commatsci.2013.10.002 · Cited by 86
Harnessing battery recovery effect in wireless sensor networks: Experiments and analysis
Chau, C.-K., Qin, F., Sayed, S. G., et al. (2010) · IEEE Journal on Selected Areas in Communications · doi:10.1109/jsac.2010.100926 · Cited by 86
“First, the kinetic battery models [7], [8] attempt to model t he detailed chemical reactions and diffusion process between th electrode and electrolyte in a battery through a set of parti al differential equations.”
MethodBruggeman's Exponents for Effective Thermal Conductivity of Lithium-Ion Battery Electrodes
Vadakkepatt, A., Trembacki, B. L., Mathur, S. R., & Murthy, J. Y. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0151602jes · Cited by 90
Battery Models for Battery Powered Applications: A Comparative Study
Campagna, N., Castiglia, V., Miceli, R., Mastromauro, R. A., Spataro, C., Trapanese, M., & Viola, F. (2020) · Energies · doi:10.3390/en13164085 · Cited by 102
Northrop, P. W. C., Suthar, B., Ramadesigan, V., Santhanagopalan, S., Braatz, R. D., & Subramanian, V. R. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.018408jes · Cited by 86
Zhu, J.-G., Sun, Z., Wei, X.-Z., & Dai, H.-F. (2016) · Journal of Applied Electrochemistry · doi:10.1007/s10800-015-0887-z · Cited by 76
“According to porous electrode theory [31, 32, 35], i0 is independent from battery current, and can be given as follows:”
BackgroundTransient three-dimensional thermal model for batteries with thin electrodes
Taheri, P., Yazdanpour, M., & Bahrami, M. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.05.175 · Cited by 92
Fingerprinting Redox Heterogeneity in Electrodes during Extreme Fast Charging
Mistry, A. N., Usseglio‐Viretta, F. L. E., Colclasure, A. M., Smith, K. A., & Mukherjee, P. P. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab8fd7 · Cited by 89
Adam, A., Wandt, J., Knobbe, E., Bauer, G., & Kwade, A. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/abb564 · Cited by 91
Arnot, D. J., Mayilvahanan, K. S., Hui, Z., Takeuchi, K. J., Marschilok, A. C., Bock, D. C., Wang, L., West, A. C., & Takeuchi, E. S. (2022) · Accounts of Materials Research · doi:10.1021/accountsmr.1c00281 · Cited by 99
Farkhondeh, M., Safari, M., Pritzker, M. D., Fowler, M. W., Han, T., Wang, J., & Delacourt, C. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.094401jes · Cited by 82
Measurement of Tortuosity and Porosity of Porous Battery Electrodes
DuBeshter, T., Sinha, P. K., Sakars, A., Fly, G. W., & Jorné, J. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.073404jes · Cited by 86
Hatzell, K. B., Sharma, A., & Fathy, H. K. (2012) · 2012 American Control Conference (ACC) · doi:10.1109/acc.2012.6315578 · Cited by 84
“The literature provides fundamental electrochemistry-based models of LIB dynamics [33], [59], [18].”
BackgroundCi, S., Zhang, J., Sharif, H., & Alahmad, M. A. (2007) · Globecom · doi:10.1109/glocom.2007.201 · Cited by 87
“We adopt the model of Bellcore PLION cell [8], [18], [19] which has 4.”
MethodPietsch, P., Heß, M., Ludwig, W., Eller, J., & Wood, V. C. (2016) · Scientific Reports · doi:10.1038/srep27994 · Cited by 91
Measuring the Salt Activity Coefficient in Lithium-Battery Electrolytes
Stewart, S. G., & Newman, J. (2008) · Journal of The Electrochemical Society · doi:10.1149/1.2904526 · Cited by 103
Self-citationMoving Boundary Model for the Discharge of a LiCoO[sub 2] Electrode
Zhang, Q., & White, R. E. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2728733 · Cited by 83
A Reduced-Order Electrochemical Model of Li-Ion Batteries for Control and Estimation Applications
Fan, G., Li, X., & Canova, M. (2017) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2017.2738780 · Cited by 84
“where ie is the ionic current in the electrolyte, κ f is the effective ionic conductivity and κ f D is defined as the effective diffusional conductivity [19]:”
BackgroundMethodInfluentialFailure modes and mechanisms for rechargeable Lithium-based batteries: a state-of-the-art review
Lyu, D., Ren, B., & Li, S. (2018) · Acta Mechanica · doi:10.1007/s00707-018-2327-8 · Cited by 86
Electrokinetic Analysis of Poorly Conductive Electrocatalytic Materials
Chung, D. Y., Park, S., Lopes, P. P., Stamenković, V. R., Sung, Y., Marković, N. M., & Strmcnik, D. S. (2020) · ACS Catalysis · doi:10.1021/acscatal.0c00960 · Cited by 90
Physics-based fractional-order model with simplified solid phase diffusion of lithium-ion battery
Guo, D., Yang, G., Feng, X., Han, X., Lu, L., & Ouyang, M. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101404 · Cited by 85
Wang, Y., & Zhao, G. (2023) · Control Engineering Practice · doi:10.1016/j.conengprac.2023.105451 · Cited by 85
Huang, J., Li, Z., Zhang, J., Song, S., Lou, Z., & Wu, N. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0241504jes · Cited by 82
“(λ) = √ λ coth( √ λ) − 1 [2]”
Yang, Q., Xu, J., Cao, B., & Li, X. (2017) · PLOS ONE · doi:10.1371/journal.pone.0172424 · Cited by 82
Bicontinuous phase separation of lithium-ion battery electrodes for ultrahigh areal loading
Lee, J. T., Jo, C., & Volder, M. F. L. D. (2020) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2007250117 · Cited by 85
“The porosity, tortuosity, and thickness of electrodes are driving factors in the rate performance (41, 42), but unfortunately, measuring the porosity and tortuosity of TIPS electrode is challenging because the pores are de facto filled with electrolyte, which makes focused ion beam-SEM imaging impossible and results i…”
BackgroundSensitivity Analysis and Joint Estimation of Parameters and States for All-Solid-State Batteries
Deng, Z., Hu, X., Lin, X., Kim, Y., & Li, J. (2021) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2021.3050987 · Cited by 85
“In conventional lithiumion batteries, the electrodes are filled with liquid electrolyte, and a pseudo-2-D (P2D) model based on the porous electrode theory has been established to simulate its behavior [7], [8].”
MethodJindal, P., Kumar, B. S., & Bhattacharya, J. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.102619 · Cited by 81
Boz, B., Dev, T., Salvadori, A., & Schaefer, J. L. (2021) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ac1cc3 · Cited by 95
Design of Bi-Tortuous, Anisotropic Graphite Anodes for Fast Ion-Transport in Li-Ion Batteries
Nemani, V. P., Harris, S. J., & Smith, K. C. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0151508jes · Cited by 92
Precipitation in aqueous lithium–oxygen batteries: a model-based analysis
Horstmann, B., Danner, T., & Bessler, W. G. (2013) · Energy & Environmental Science · doi:10.1039/c3ee24299d · Cited by 80
Allu, S., Kalnaus, S., Elwasif, W. R., Simunovic, S., Turner, J., & Pannala, S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.08.040 · Cited by 81
A Mathematical Model of Oxide/Carbon Composite Electrode for Supercapacitors
Kim, H., & Popov, B. N. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1593039 · Cited by 81
Franco, A. A., & Xue, K. (2013) · ECS Journal of Solid State Science and Technology · doi:10.1149/2.012310jss · Cited by 81
Including double-layer capacitance in lithium-ion battery mathematical models
Legrand, N., Raël, S., Knosp, B., Hinaje, M., Desprez, P., & Lapicque, F. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.11.044 · Cited by 82
Wang, Y., Fang, H., Sahinoglu, Z., Wada, T., & Hara, S. (2015) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2014.2356503 · Cited by 79
Varini, M., Campana, P. E., & Lindbergh, G. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2019.100819 · Cited by 80
“Butler–Volmer equation is commonly used in LIBs for expressing ηkin [15]:”
BackgroundMethodSingh, L. K., Mishra, G., Sharma, A. K., & Gupta, A. K. (2021) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2021.07.031 · Cited by 81
Boyce, A. M., Lu, X., Brett, D. J. L., et al. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.231779 · Cited by 80
Peng, R., Kong, D., Ping, P., Wang, G., Gao, X., Lv, H., Zhao, H., He, X., Zhang, Y., & Dai, X. (2024) · Energy storage materials · doi:10.1016/j.ensm.2024.103417 · Cited by 133
An advanced model framework for solid electrolyte intercalation batteries
Landstorfer, M., Funken, S. A., & Jacob, T. (2011) · Physical Chemistry Chemical Physics · doi:10.1039/c0cp02473b · Cited by 83
A Foster Network Thermal Model for HEV/EV Battery Modeling
Hu, X., Lin, S., Stanton, S., & Lian, W. (2011) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2011.2155012 · Cited by 81
Broadband Identification of Battery Electrical Impedance for HEVs
Al Nazer, R., Cattin, V., Granjon, P., Montaru, M., & Ranieri, M. (2013) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2013.2254140 · Cited by 80
Scheduling of Battery Charge, Discharge, and Rest
Kim, H., & Shin, K. G. (2009) · IEEE Real-Time Systems Symposium (RTSS) · doi:10.1109/rtss.2009.38 · Cited by 86
“To generate a reference including Fre f and Π presented in Section III-A, we use Dualfoil [10, 12, 13].”
MethodInfluentialModel-based electrochemical estimation of lithium-ion batteries
Smith, K. A., Rahn, C. D., & Wang, C. (2008) · The proceedings of the IEEE Conference on Control Applications/The proceedings of the ... IEEE Conference on Control Applications · doi:10.1109/cca.2008.4629589 · Cited by 85
“For lithium-ion (Li-ion) batteries, the one-dimensional model of Doyle, Fuller, and Newman [4], [5] derived from porous electrode and concentrated solution theory captures relevant solid-state and electrolyte diffusion dynamics and accurately predicts current/voltage response.”
MethodInfluentialHeubner, C., Heiden, S., Schneider, M., et al. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.02.107 · Cited by 80
Identifying degradation mechanisms in lithium-ion batteries with coating defects at the cathode
David, L., Ruther, R. E., Mohanty, D., Meyer, H. M., Sheng, Y., Kalnaus, S., Daniel, C., & Wood, D. L. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.09.073 · Cited by 85
An electrochemical model for high C-rate conditions in lithium-ion batteries
Li, J., Wang, D., & Pecht, M. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.226885 · Cited by 79
Effect of thermal environments on fast charging Li-ion batteries
Liu, T., Ge, S., Yang, X., & Wang, C. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.230466 · Cited by 92
Fu, Z., Zuo, W., Li, Q., Zhou, K., Huang, Y., & Li, Y. (2025) · Energy · doi:10.1016/j.energy.2025.134853 · Cited by 86
Theoretical examination of reference electrodes for lithium-ion cells
Dees, D. W., Jansen, A. N., & Abraham, D. P. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.06.128 · Cited by 80
Liu, G., Ouyang, M., Lu, L., Li, J., & Han, X. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.10.132 · Cited by 82
Awarke, A., Pischinger, S., & Ogrzewalla, J. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.022302jes · Cited by 83
Simulation of temperature rise in Li-ion cells at very high currents
Mao, J., TIEDEMANN, W. H., & Newman, J. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.08.033 · Cited by 81
Self-citationTan, M., Gan, Y., Liang, J., He, L., Li, Y., Song, S., & Shi, Y. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.115500 · Cited by 82
Yin, L., Bjorneklett, A., Söderlund, E., & Brandell, D. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.102648 · Cited by 87
Review of computational parameter estimation methods for electrochemical models
Miguel, E., Plett, G. L., Trimboli, M. S., Oca, L., Iraola, U., & Bekaert, É. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.103388 · Cited by 82
Wang, Y., Zhang, X., Liu, K., Wei, Z., Hu, X., Tang, X., & Chen, Z. (2023) · eTransportation · doi:10.1016/j.etran.2023.100295 · Cited by 78
Zhao, H.-Y., Liao, C.-L., Zhang, C., Wang, L.-Y., & Wang, L.-F. (2024) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.234451 · Cited by 72
Baumgärtner, J. F., Kravchyk, K. V., & Kovalenko, M. V. (2024) · Advanced Energy Materials · doi:10.1002/aenm.202400499 · Cited by 95
Safavi, V., Vaniar, A. M., Bazmohammadi, N., Vásquez, J. C., Keysan, O., & Guerrero, J. M. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.113176 · Cited by 100
All Solid-State Lithium-Polymer Battery Using a Self-Cross-Linking Polymer Electrolyte
Wang, C., Sakai, T., Watanabe, O., Hirahara, K., & Nakanishi, T. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1593652 · Cited by 77
Suthar, B., Northrop, P. W. C., Braatz, R. D., & Subramanian, V. R. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0211411jes · Cited by 86
Modeling Volume Change due to Intercalation into Porous Electrodes
Garrick, T. R., Kanneganti, K., Huang, X., & Weidner, J. W. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.030408jes · Cited by 79
A Survey on Energy Management for Mobile and IoT Devices
Pasricha, S., Ayoub, R. Z., Kishinevsky, M., Mandal, S. K., & Ogras, U. Y. (2020) · IEEE Design and Test · doi:10.1109/mdat.2020.2976669 · Cited by 87
“In [129] and [130], detailed electrochemical models were proposed that represent the battery using a set of coupled nonlinear differential equations that require numerical solutions.”
BackgroundThermal management of lithium-ion battery cells using 3D printed phase change composites
Nofal, M., Al‐Hallaj, S., & Pan, Y. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.115126 · Cited by 77
Modeling the Impact of Manufacturing Uncertainties on Lithium-Ion Batteries
Schmidt, O., Thomitzek, M., Röder, F., Thiede, S., Herrmann, C. A., & Krewer, U. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab798a · Cited by 80
“24,27,28 Based on a de fi ned set of structural and material parameters and an applied current the model is able to estimate the cell potential over time.”
BackgroundChun, H., Kim, J., Yu, J., & Han, S. (2020) · IEEE Access · doi:10.1109/access.2020.2991124 · Cited by 84
“is derived from themicrostructure of a lithium-ion battery [7].”
Background
Metadata
- Authors
- Doyle, M., Fuller, T. F., & Newman, J.
- Affiliations
- Lawrence Berkeley National Laboratory (US)
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 1993-06-01
- Volume
- 140
- Issue
- 6
- Pages
- 1526-1533
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2113449668
- Cited by
- 4,328
- References
- 13
- Citations by year
- 2026: 466 · 2025: 496 · 2024: 401 · 2023: 374 · 2022: 303 · 2021: 306 · 2020: 288 · 2019: 212 · 2018: 190 · 2017: 183 · 2016: 165 · 2015: 150 · 2014: 150 · 2013: 144 · 2012: 109
- FWCI
- 6.42
- Type
- journal article
- Language
- en
- Open access
- bronze
- doi.org
- Licence
- iopscience.iop.org/page/copyright (vor, 9685 d)
- iopscience.iop.org/info/page/text-and-data-mining (tdm, 9685 d)
- Locations
- Journal of The Electrochemical Society (publishedVersion)
- Funders
- U.S. Department of Energy
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Battery Materials
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Battery Materials and Technologies
- Physical Sciences › Engineering › Automotive Engineering › Battery Modeling and Management
- Keywords
- lithium batteries, solid polymer electrolytes, concentrated solution theory, lithium metal anode, superposition method, electrolyte transport, composite cathode, lithium salts
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.