Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell
Open accessThe DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
Abstract
The galvanostatic charge and discharge of a lithium anode/solid polymer separator/insertion cathode cell is modeled using concentrated solution theory. The model is general enough to include a wide range of polymeric separator materials, lithium salts, and composite insertion cathodes. Insertion of lithium into the active cathode material is simulated using superposition, thus greatly simplifying the numerical calculations. Variable physical properties are permitted in the model. The results of a simulation of the charge/discharge behavior of the system are presented. Criteria are established to assess the importance of diffusion in the solid matrix and transport in the electrolyte. Consideration is also given to various procedures for optimization of the utilization of active cathode material.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“According to their outcomes, KF output is superior to RLS [91].”
In the citing paper
“Electrochemical models are somewhat more accurate than the classical acoustic ones as being based on the description of the battery's inner chemical processes such as lithium ions diffusion of within the electrodes and the electrolyte [31].”
From Review Paper for SOC Estimation Techniques: Challenges and Future Areas for Improvement (2024) · cites this paper as [31]
Citations
Cites
(1996) · Journal of Power Sources · doi:10.1016/s0378-7753(97)81054-3 · Cited by 463
Experimental Determination of the Transport Number of Water in Nafion 117 Membrane
Fuller, T. F., & Newman, J. (1992) · Journal of The Electrochemical Society · doi:10.1149/1.2069407 · Cited by 278
Self-citationAssessment of Polymer‐Electrolyte Batteries for EV and Ambient Temperature Applications
Gauthier, M., Fauteux, D., Vassort, G., Bélanger, A., Duval, M., Ricoux, P., Chabagno, J. M., Muller, D. A., Rigaud, P., Armand, M. B., et al. (1985) · Journal of The Electrochemical Society · doi:10.1149/1.2114112 · Cited by 156
Formation of a passivating film at the lithium-PEO-LiCF3SO3 interface
Fauteux, D. (1985) · Solid State Ionics · doi:10.1016/0167-2738(85)90061-x · Cited by 134
The fabrication and performance of all solid state polymer-based rechargeable lithium cells
Hooper, A. J., & North, J. M. (1983) · Solid State Ionics · doi:10.1016/0167-2738(83)90146-7 · Cited by 124
Laminar Boundary Layer Flows with Surface Reactions
Acrivos, A., & Chambré, P. L. (1957) · Industrial & Engineering Chemistry · doi:10.1021/ie50570a037 · Cited by 100
Status of rechargeable positive electrodes for ambient temperature lithium batteries
Abraham, K. M. (1981) · Journal of Power Sources · doi:10.1016/0378-7753(81)80058-4 · Cited by 88
A Polymeric Electrolyte Rechargeable Lithium Battery
Bonino, F., Ottaviani, M., Scrosati, B., et al. (1988) · Journal of The Electrochemical Society · doi:10.1149/1.2095538 · Cited by 72
Lithium Electrode/PEO‐Based Polymer Electrolyte Interface Behavior Between 60° and 120°C
Fauteux, D. (1988) · Journal of The Electrochemical Society · doi:10.1149/1.2096244 · Cited by 64
Performance of polymer electrolyte cells at +25 to +100°C
Munshi, M. (1988) · Solid State Ionics · doi:10.1016/0167-2738(88)90244-5 · Cited by 62
Cited by
Items 301–400 of 1,016
Effects of entropy changes in anodes and cathodes on the thermal behavior of lithium ion batteries
Williford, R. E., Viswanathan, V. V., & Zhang, J.-G. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.10.078 · Cited by 162
Secondary-Phase Stochastics in Lithium-Ion Battery Electrodes
Mistry, A. N., Smith, K. A., & Mukherjee, P. P. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b17771 · Cited by 165
A pseudo three-dimensional electrochemical-thermal model of a cylindrical LiFePO4/graphite battery
Chiew, J., Chin, C. S., Toh, W. D., Gao, Z., Jia, J., & Zhang, C. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.10.108 · Cited by 162
Recent Insights into Rate Performance Limitations of Li‐ion Batteries
Heubner, C., Nikolowski, K., Reuber, S., Schneider, M., Wolter, M., & Michaelis, A. (2021) · Batteries & Supercaps · doi:10.1002/batt.202000227 · Cited by 161
Upscaling high-areal-capacity battery electrodes
Kim, J., Kim, N.-Y., Ju, Z., Hong, Y., Kang, K.-D., Pang, J.-H., Lee, S.-J., Chae, S.-S., Park, M.-S., Kim, J.-Y., et al. (2025) · Nature Energy · doi:10.1038/s41560-025-01720-0 · Cited by 222
“To quantify such deliverable capacities under various conditions, we used COMSOL simulations based on the theoretical model framework established by Newman and co-workers 57 , incorporating electrode parameters with M AM,cat in the range of 15–45 mg cm −2 .”
Ai, W., Wu, B., & Martínez‐Pañeda, E. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.231805 · Cited by 160
Miranda, D., Gonçalves, R., Wuttke, S., Costa, C. M., & Lanceros‐Méndez, S. (2023) · Advanced Energy Materials · doi:10.1002/aenm.202203874 · Cited by 160
Battery modelling methods for electric vehicles - A review
Zhang, C., Li, K., Mcloone, S., & Yang, Z. (2014) · 2014 European Control Conference (ECC) · doi:10.1109/ecc.2014.6862541 · Cited by 158
“[3], [4] developed an isothermal onedimensional electrochemical model for galvanostatic charge and discharge of a battery cell with lithium anode, solid polymer separator and insertion cathode.”
Dey, S., Ayalew, B., & Pisu, P. (2015) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2014.2382635 · Cited by 158
“However, the complexity and computation burden of the full electrochemical model [known as pseudo-2D (P2D) model [7]] requires some level of model reduction for real-time implementable estimator designs.”
BackgroundIdentifiability and Parameter Estimation of the Single Particle Lithium-Ion Battery Model
Bizeray, A. M., Kim, J.-H., Duncan, S., & Howey, D. A. (2018) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2018.2838097 · Cited by 219
“The relationship between the reaction rate ji and the overpotential ηi is given by the Butler–Volmer kinetics equation [24]”
MethodResultInfluentialMei, W., Chen, H., Sun, J., & Wang, Q. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.06.075 · Cited by 158
Two-electron reduction of ethylene carbonate: A quantum chemistry re-examination of mechanisms
Leung, K. (2012) · Chemical Physics Letters · doi:10.1016/j.cplett.2012.08.022 · Cited by 161
Electrochemical Modeling of Linear and Nonlinear Aging of Lithium-Ion Cells
Keil, J., & Jossen, A. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/aba44f · Cited by 172
Fu, R., Xiao, M., & Choe, S.-Y. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.09.096 · Cited by 163
Electrochemical modeling of lithium polymer batteries
Dees, D. W., Battaglia, V., & Bélanger, A. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00193-3 · Cited by 162
Bohn, E., Eckl, T., Kamlah, M., & McMeeking, R. M. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.011310jes · Cited by 156
Jiang, F., & Peng, P. (2016) · Scientific Reports · doi:10.1038/srep32639 · Cited by 159
Ion Correlations and Their Impact on Transport in Polymer-Based Electrolytes
Fong, K. D., Self, J., McCloskey, B. D., & Persson, K. A. (2021) · Macromolecules · doi:10.1021/acs.macromol.0c02545 · Cited by 180
A discrete-time battery model for high-level power estimation
Benini, L., Castelli, G., Macii, A., et al. (2000) · Design, Automation and Test in Europe Conference (DATE) · doi:10.1145/343647.343694 · Cited by 154
Yang, C., Wang, X., Fang, Q., Dai, H., Cao, Y., & Wei, X. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101250 · Cited by 153
Li, J., Lotfi, N., Landers, R. G., & Park, J. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1541704jes · Cited by 149
Yang, S.-C., Hua, Y., Qiao, D., Lian, Y.-B., Pan, Y.-W., & He, Y.-L. (2019) · Electrochimica Acta · doi:10.1016/j.electacta.2019.134928 · Cited by 152
Zhang, Y., Wik, T., Bergström, J., Pecht, M., & Zou, C. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.231110 · Cited by 151
“The physics-based modelling has achieved excellent progress in capturing battery dynamics in a fast timescale [26–28], but their application to online prediction of battery ageing is very challenging.”
BackgroundA physics-based distributed-parameter equivalent circuit model for lithium-ion batteries
Li, Y., Vilathgamuwa, M., Farrell, T., Choi, S. S., Tran, N. T., & Teague, J. (2019) · Electrochimica Acta · doi:10.1016/j.electacta.2018.12.167 · Cited by 151
“A P2D model of Li-ion cell which consists of a set of coupled, nonlinear PDAEs are presented in Table 1, while the physical meanings of each of the symbols used in the equations are given in the Nomenclature section or explained in [3, 32].”
MethodTang, X., Zou, C., Yao, K., Lu, J., Xia, Y., & Gao, F. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.113591 · Cited by 150
“The pioneering electrochemical model of a Li-ion battery, that describes electrochemical reactions and the concentration di ff usion process, was formulated by Doyle, Fuller, and New-man in 1993 [11].”
Ge, H., Huang, J., Zhang, J., & Li, Z. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0961602jes · Cited by 150
Lin, X., Zhou, G., Liu, J., Yu, J., Effat, M. B., Wu, J., & Ciucci, F. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202001235 · Cited by 154
Subramanian, V. R., Ritter, J. A., & White, R. E. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1409397 · Cited by 150
Lithium Ion Battery Models and Parameter Identification Techniques
Barcellona, S., & Piegari, L. (2017) · Energies · doi:10.3390/en10122007 · Cited by 149
“[47,52], in order to estimate both the current and voltage limits for a lithium ion cell under pulse operations.”
BackgroundPhysics-informed neural networks for electrode-level state estimation in lithium-ion batteries
Li, W., Zhang, J., Ringbeck, F., Jöst, D., Zhang, L., Wei, Z., & Sauer, D. U. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.230034 · Cited by 179
AlKhedher, M. A., Tahhan, A. B. A., Yousaf, J., Ghazal, M. A., Shahbazian‐Yassar, R., & Ramadan, M. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.111172 · Cited by 168
Heß, M., & Novák, P. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.05.056 · Cited by 163
Efficient Reformulation of Solid-Phase Diffusion in Physics-Based Lithium-Ion Battery Models
Ramadesigan, V., Boovaragavan, V., Pirkle, J. C., & Subramanian, V. R. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3425622 · Cited by 149
Wang, Y., Gao, G., Li, X., & Chen, Z. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.227543 · Cited by 150
Thermal analyses of LiFePO 4 /graphite battery discharge processes
Jiang, F., Peng, P., & Sun, Y. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.05.089 · Cited by 148
Controls oriented reduced order modeling of lithium deposition on overcharge
Perkins, R. D., Randall, A. V., Zhang, X., & Plett, G. L. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.03.003 · Cited by 153
Farag, M., Sweity, H., Fleckenstein, M., & Habibi, S. R. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.06.031 · Cited by 149
Manufacturing Process for Improved Ultra‐Thick Cathodes in High‐Energy Lithium‐Ion Batteries
Kremer, L. S., Hoffmann, A., Danner, T., Hein, S., Prifling, B., Westhoff, D., Dreer, C., Latz, A., Schmidt, V., & Wohlfahrt‐Mehrens, M. (2019) · Energy Technology · doi:10.1002/ente.201900167 · Cited by 152
Modeling the performance of rechargeable lithium-based cells: design correlations for limiting cases
Doyle, M., & Newman, J. (1995) · Journal of Power Sources · doi:10.1016/0378-7753(94)02038-5 · Cited by 155
Self-citationNumerical simulation of porous networks in relation to battery electrodes and separators
Patel, K. K., Paulsen, J., & Desilvestro, J. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00399-9 · Cited by 155
A distributed thermal model for a Li-ion electrode plate pair
Guo, M., & White, R. E. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.08.012 · Cited by 159
Hausmann, A., & Depcik, C. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.01.174 · Cited by 148
Capacity fade modelling of lithium-ion battery under cyclic loading conditions
Ashwin, T. R., Chung, Y. M., & Wang, J. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.08.054 · Cited by 147
Heat generation and thermal runaway mechanisms induced by overcharging of aged lithium-ion battery
Liu, J., Wang, Z., Bai, J., Gao, T., & Mao, N. (2022) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.118565 · Cited by 151
Numerical modeling of electrochemical–mechanical interactions in lithium polymer batteries
Golmon, S., Maute, K. K., & Dunn, M. L. (2009) · Computers & Structures · doi:10.1016/j.compstruc.2009.08.005 · Cited by 164
“1 A/m(2) [17] Mechanical boundary condition Fixed ends”
BackgroundMethodInfluentialMicro-Scale Modeling of Li-Ion Batteries: Parameterization and Validation
Less, G. B., Seo, J. H., Han, S., et al. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.096205jes · Cited by 144
Stancovski, V., & Bǎdilescu, S. (2013) · Journal of Applied Electrochemistry · doi:10.1007/s10800-013-0628-0 · Cited by 153
Vennam, G., Sahoo, A., & Ahmed, S. M. F. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.104720 · Cited by 156
Li, J., Cheng, Y., Ai, L., Jia, M., Du, S., Yin, B., Stanley, W., & Zhang, H. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.06.034 · Cited by 146
Li, C., Cui, N., Wang, C., & Zhang, C. (2021) · Energy · doi:10.1016/j.energy.2020.119662 · Cited by 143
Cracking predictions of lithium-ion battery electrodes by X-ray computed tomography and modelling
Boyce, A. M., Martínez‐Pañeda, E., Wade, A., Zhang, Y. S., Bailey, J. J., Heenan, T. M. M., Brett, D. J. L., & Shearing, P. R. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.231119 · Cited by 145
“The single particle [14–16] and cell [17–19] models typically employ homogenised versions of the physical equations used in three-dimensional micro-scale models [20] due to their computational efficiency and accuracy.”
BackgroundA locally solvent-tethered polymer electrolyte for long-life lithium metal batteries
Zhu, Y., Lao, Z., Zhang, M., Hou, T., Xiao, X., Piao, Z., Lu, G., Han, Z., Gao, R., Nie, L., et al. (2024) · Nature Communications · doi:10.1038/s41467-024-48078-7 · Cited by 182
“27) 39 .”
Electrochemical Analysis of Lithiated Graphite Anodes
Verbrugge, M. W., & Koch, B. J. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1553788 · Cited by 141
Optimal Porosity Distribution for Minimized Ohmic Drop across a Porous Electrode
Ramadesigan, V., Methekar, R. N., Latinwo, F., Braatz, R. D., & Subramanian, V. R. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3495992 · Cited by 143
Some Possible Approaches for Improving the Energy Density of Li-Air Batteries
Andrei, P., Zheng, J. P., Hendrickson, M. A., et al. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3486114 · Cited by 142
Review—Manganese Dissolution from Spinel Cathode: Few Unanswered Questions
Bhandari, A., & Bhattacharya, J. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0101614jes · Cited by 143
Electrochemical–Thermal Model of Pouch-type Lithium-ion Batteries
Ghalkhani, M., Bahiraei, F., Nazri, G., & Saif, M. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.06.164 · Cited by 152
Parameter Estimation and Model Discrimination for a Lithium-Ion Cell
Santhanagopalan, S., Guo, Q., & White, R. E. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2422896 · Cited by 147
Fu, S., Tao, S., Fan, H., He, K., Liu, X., Tao, Y., Zuo, J., Zhang, X., Wang, Y., & Sun, Y. (2024) · Applied Energy · doi:10.1016/j.apenergy.2023.121991 · Cited by 141
Mathematical Modeling of Li-Ion Battery Using Genetic Algorithm Approach for V2G Applications
Thirugnanam, K., Joy, T., Singh, M., & Kumar, P. (2014) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2014.2298460 · Cited by 143
A Mathematical Model for a Lithium-Ion Battery/Electrochemical Capacitor Hybrid System
Sikha, G., White, R. E., & Popov, B. N. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1940749 · Cited by 142
Xiao, M., & Choe, S.-Y. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.04.062 · Cited by 145
Liang, J., Gan, Y., Li, Y., et al. (2019) · Energy · doi:10.1016/j.energy.2019.116233 · Cited by 140
Han, S., Tang, Y., & Rahimian, S. K. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.229571 · Cited by 140
Safety challenges and safety measures of Li‐ion batteries
Chen, S., Gao, Z., & Sun, T. (2021) · Energy Science & Engineering · doi:10.1002/ese3.895 · Cited by 148
PDE estimation techniques for advanced battery management systems — Part I: SOC estimation
Moura, S. J., Chaturvedi, N. A., & Krstic, M. (2012) · 2012 American Control Conference (ACC) · doi:10.1109/acc.2012.6315019 · Cited by 139
“Second, the concentration dynamics are governed by partial differential algebraic equations derived from electrochemical principles [4], [5].”
BackgroundChoudhari, V. G., Dhoble, A. S., Panchal, S., Fowler, M. W., & Fraser, R. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.103234 · Cited by 152
Diffusion Induced Stresses and Strain Energy in a Phase-Transforming Spherical Electrode Particle
Deshpande, R., Cheng, Y.-T., Verbrugge, M. W., & Timmons, A. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3565183 · Cited by 138
Agarwal, V., Uthaichana, K., DeCarlo, R. A., & Tsoukalas, L. H. (2010) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2010.2043106 · Cited by 139
“They are highly accurate and involve detailed consideration of electrochemical processes, thermal dynamic process, and the physical construction for both charging/discharging characteristics [2], [3].”
BackgroundDiscrete-time battery models for system-level low-power design
Luca Benini, C., Castelli, G., Macii, A., Macii, A., Poncino, M., & Scarsi, R. (2001) · IEEE Transactions on Very Large Scale Integration (VLSI) Systems · doi:10.1109/92.953497 · Cited by 136
“Finally, Section VII concludes the paper.”
BackgroundHe, C., Yue, Q. L., Wu, M., Chen, Q., & Zhao, T. S. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2021.121855 · Cited by 160
Ouyang, M., Liu, G., Lu, L., Li, J., & Han, X. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.07.090 · Cited by 137
Trembacki, B. L., Mistry, A. N., Noble, D. R., Ferraro, M. E., Mukherjee, P. P., & Roberts, S. A. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0981813jes · Cited by 146
Theory of coupled ion-electron transfer kinetics
Fraggedakis, D., McEldrew, M., Smith, R. B., Krishnan, Y., Zhang, Y. A., Bai, P., Chueh, W. C., Shao‐Horn, Y., & Bazant, M. Z. (2020) · Electrochimica Acta · doi:10.1016/j.electacta.2020.137432 · Cited by 149
“[112] V. Srinivasan, J. Newman, Discharge Model for the Lithium Iron-Phosphate Electrode, Journal of The Electrochemical Society 151 (10) (2004) A1517. doi:10.”
BackgroundMethodInfluentialState of charge estimation of lithium-ion batteries based on PSO-TCN-Attention neural network
Li, F., Zuo, W., Zhou, K., Li, Q., & Huang, Y. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.110806 · Cited by 158
Influence of rib spacing in proton-exchange membrane electrode assemblies
West, A. C., & Fuller, T. F. (1996) · Journal of Applied Electrochemistry · doi:10.1007/bf00253453 · Cited by 149
Self-citationModeling of Particle-Particle Interactions in Porous Cathodes for Lithium-Ion Batteries
Stephenson, D. E., Hartman, E. M., Harb, J. N., & Wheeler, D. R. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2783772 · Cited by 137
Improving battery performance by using traffic shaping techniques
Chiasserini, C. F., & Rao, R. R. (2001) · IEEE Journal on Selected Areas in Communications · doi:10.1109/49.932705 · Cited by 143
“Electrochemical models that give a detailed representation of the electrochemical phenomena taking place within the cell can be found in the literature [12], [23].”
BackgroundMethodA Bayesian approach for Li-Ion battery capacity fade modeling and cycles to failure prognostics
Guo, J. H., Li, Z., & PECHT, M. G. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.01.164 · Cited by 140
“[11].”
Bahiraei, F., Ghalkhani, M., Fartaj, A., & Nazri, G. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.07.060 · Cited by 146
Multiscale modeling of lithium ion batteries: thermal aspects
Latz, A., & Zausch, J. (2015) · Beilstein Journal of Nanotechnology · doi:10.3762/bjnano.6.102 · Cited by 139
Ahmed, R., El Sayed, M., Arasaratnam, I., Tjong, J., & Habibi, S. (2014) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2014.2331059 · Cited by 135
“In general, ECM parameters such as diffusion coefficient and maximum solid lithium concentration are proprietary information, so they are commonly not provided by battery manufacturers.”
MethodInfluentialBazant, M. Z. (2017) · Faraday Discussions · doi:10.1039/c7fd00037e · Cited by 149
Liu, L., Feng, X., Zhang, M., Lu, L., Han, X., He, X., & Ouyang, M. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.114143 · Cited by 145
Effect of cycling rate, particle size and transport properties on lithium-ion cathode performance
Du, W., Gupta, A. K., Zhang, X., Sastry, A. M., & Shyy, W. (2010) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2010.04.017 · Cited by 131
“1) has been modeled using the porous-electrode formulation [12].”
BackgroundMethodKim, M., Chun, H., Kim, J., Kim, K., Yu, J., Kim, T., & Han, S. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.113644 · Cited by 141
Wang, Y., Li, M., & Chen, Z. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.115736 · Cited by 135
Trends in electric vehicles research
Haghani, M., Sprei, F., Kazemzadeh, K., Shahhoseini, Z., & Aghaei, J. (2023) · Transportation Research Part D Transport and Environment · doi:10.1016/j.trd.2023.103881 · Cited by 195
Diffuse-charge effects on the transient response of electrochemical cells
van Soestbergen, M., Biesheuvel, P. M., & Bazant, M. Z. (2010) · Physical Review E · doi:10.1103/physreve.81.021503 · Cited by 134
State-of-charge estimation in lithium-ion batteries: A particle filter approach
Tulsyan, A., Tsai, Y., Gopaluni, R. B., & Braatz, R. D. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.08.113 · Cited by 135
“[30], consists of two PDEs for diffusion of lithium ions through the electrolyte and through the active particles.”
BackgroundMethodWang, Q., He, Y., Shen, J.-N., Ma, Z., & Zhong, G. (2017) · Energy · doi:10.1016/j.energy.2017.07.035 · Cited by 144
Electrochemical impedance spectroscopy beyond linearity and stationarity—A critical review
Hallemans, N., Howey, D. A., Battistel, A., Saniee, N. F., Scarpioni, F., Wouters, B., Mantia, F. L., Hubin, A., Widanage, W. D., & Lataire, J. (2023) · Electrochimica Acta · doi:10.1016/j.electacta.2023.142939 · Cited by 171
One-dimensional physics-based reduced-order model of lithium-ion dynamics
Lee, J. L., Chemistruck, A., & Plett, G. L. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.07.075 · Cited by 133
Thermodynamic derivation of a Butler–Volmer model for intercalation in Li-ion batteries
Latz, A., & Zausch, J. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.06.043 · Cited by 133
An Accurate Charging Model of Battery Energy Storage
Pandžić, H., & Bobanac, V. (2018) · IEEE Transactions on Power Systems · doi:10.1109/tpwrs.2018.2876466 · Cited by 145
“[16].”
Xu, H., Zhu, J., Finegan, D. P., Zhao, H., Lu, X., Li, W., Hoffman, N., Bertei, A., Shearing, P. R., & Bazant, M. Z. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202003908 · Cited by 161
Review of Thermal Management Technology for Electric Vehicles
Dan, D., Zhao, Y., Wei, M., & Wang, X. (2023) · Energies · doi:10.3390/en16124693 · Cited by 156
Effect of thermal contact resistances on fast charging of large format lithium ion batteries
Ye, Y., Saw, L. H., Shi, Y., Somasundaram, K., & Tay, A. A. O. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2014.04.134 · Cited by 135
Battery model for embedded systems
Rao, V., Singhal, G., Kumar, A., & Navet, N. (2005) · International Conference on VLSI Design · doi:10.1109/icvd.2005.61 · Cited by 131
“In early models, the electrochemical processes in the battery have been expressed using partial differential equations [2].”
MethodZhao, X., Yin, Y., Hu, Y., & Choe, S.-Y. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.02.001 · Cited by 128
“[27] firstly proposed the equations that describe the lithium deposition reaction at overcharge based on Doyle's model [28].”
Background
Metadata
- Authors
- Doyle, M., Fuller, T. F., & Newman, J.
- Affiliations
- Lawrence Berkeley National Laboratory (US)
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 1993-06-01
- Volume
- 140
- Issue
- 6
- Pages
- 1526-1533
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2113449668
- Cited by
- 4,328
- References
- 13
- Citations by year
- 2026: 466 · 2025: 496 · 2024: 401 · 2023: 374 · 2022: 303 · 2021: 306 · 2020: 288 · 2019: 212 · 2018: 190 · 2017: 183 · 2016: 165 · 2015: 150 · 2014: 150 · 2013: 144 · 2012: 109
- FWCI
- 6.42
- Type
- journal article
- Language
- en
- Open access
- bronze
- doi.org
- Licence
- iopscience.iop.org/page/copyright (vor, 9685 d)
- iopscience.iop.org/info/page/text-and-data-mining (tdm, 9685 d)
- Locations
- Journal of The Electrochemical Society (publishedVersion)
- Funders
- U.S. Department of Energy
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Battery Materials
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Battery Materials and Technologies
- Physical Sciences › Engineering › Automotive Engineering › Battery Modeling and Management
- Keywords
- lithium batteries, solid polymer electrolytes, concentrated solution theory, lithium metal anode, superposition method, electrolyte transport, composite cathode, lithium salts
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.