Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell
Open accessThe DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
Abstract
The galvanostatic charge and discharge of a lithium anode/solid polymer separator/insertion cathode cell is modeled using concentrated solution theory. The model is general enough to include a wide range of polymeric separator materials, lithium salts, and composite insertion cathodes. Insertion of lithium into the active cathode material is simulated using superposition, thus greatly simplifying the numerical calculations. Variable physical properties are permitted in the model. The results of a simulation of the charge/discharge behavior of the system are presented. Criteria are established to assess the importance of diffusion in the solid matrix and transport in the electrolyte. Consideration is also given to various procedures for optimization of the utilization of active cathode material.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“According to their outcomes, KF output is superior to RLS [91].”
In the citing paper
“Electrochemical models are somewhat more accurate than the classical acoustic ones as being based on the description of the battery's inner chemical processes such as lithium ions diffusion of within the electrodes and the electrolyte [31].”
From Review Paper for SOC Estimation Techniques: Challenges and Future Areas for Improvement (2024) · cites this paper as [31]
Citations
Cites
(1996) · Journal of Power Sources · doi:10.1016/s0378-7753(97)81054-3 · Cited by 463
Experimental Determination of the Transport Number of Water in Nafion 117 Membrane
Fuller, T. F., & Newman, J. (1992) · Journal of The Electrochemical Society · doi:10.1149/1.2069407 · Cited by 278
Self-citationAssessment of Polymer‐Electrolyte Batteries for EV and Ambient Temperature Applications
Gauthier, M., Fauteux, D., Vassort, G., Bélanger, A., Duval, M., Ricoux, P., Chabagno, J. M., Muller, D. A., Rigaud, P., Armand, M. B., et al. (1985) · Journal of The Electrochemical Society · doi:10.1149/1.2114112 · Cited by 156
Formation of a passivating film at the lithium-PEO-LiCF3SO3 interface
Fauteux, D. (1985) · Solid State Ionics · doi:10.1016/0167-2738(85)90061-x · Cited by 134
The fabrication and performance of all solid state polymer-based rechargeable lithium cells
Hooper, A. J., & North, J. M. (1983) · Solid State Ionics · doi:10.1016/0167-2738(83)90146-7 · Cited by 124
Laminar Boundary Layer Flows with Surface Reactions
Acrivos, A., & Chambré, P. L. (1957) · Industrial & Engineering Chemistry · doi:10.1021/ie50570a037 · Cited by 100
Status of rechargeable positive electrodes for ambient temperature lithium batteries
Abraham, K. M. (1981) · Journal of Power Sources · doi:10.1016/0378-7753(81)80058-4 · Cited by 88
A Polymeric Electrolyte Rechargeable Lithium Battery
Bonino, F., Ottaviani, M., Scrosati, B., et al. (1988) · Journal of The Electrochemical Society · doi:10.1149/1.2095538 · Cited by 72
Lithium Electrode/PEO‐Based Polymer Electrolyte Interface Behavior Between 60° and 120°C
Fauteux, D. (1988) · Journal of The Electrochemical Society · doi:10.1149/1.2096244 · Cited by 64
Performance of polymer electrolyte cells at +25 to +100°C
Munshi, M. (1988) · Solid State Ionics · doi:10.1016/0167-2738(88)90244-5 · Cited by 62
Cited by
Items 501–600 of 1,016
Ye, J., Xie, Q., Lin, M., & Wu, J. (2024) · Energy · doi:10.1016/j.energy.2024.130828 · Cited by 133
Modeling of Li-Ion Cells for Fast Simulation of High C-Rate and Low Temperature Operations
Fan, G., Pan, K., Canova, M., Marcicki, J., & Yang, X. G. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0761605jes · Cited by 104
Comparison of single particle and equivalent circuit analog models for a lithium-ion cell
Rahimian, S. K., Rayman, S. C., & White, R. E. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.06.007 · Cited by 106
Gallagher, K. G., Dees, D. W., Jansen, A. N., Abraham, D. P., & Kang, S. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.015301jes · Cited by 106
Zavalis, T. G., Klett, M., Kjell, M. H., Behm, M., Lindström, R. W., & Lindbergh, G. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.05.081 · Cited by 111
Mesbahi, T., Khenfri, F., Rizoug, N., Chaaban, K., Bartholomeüs, P., & Moigne, P. L. (2015) · Electric Power Systems Research · doi:10.1016/j.epsr.2015.10.018 · Cited by 114
Zhu, J., Knapp, M., Darma, M. S. D., Fang, Q., Wang, X., Dai, H., Wei, X., & Ehrenberg, H. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.04.066 · Cited by 111
Yin, Y., & Choe, S.-Y. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.115232 · Cited by 114
Yang, Y., Chen, L., Yang, L., & Du, X. (2021) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2021.106968 · Cited by 108
Physics-Informed Neural Networks for State of Health Estimation in Lithium-Ion Batteries
Hofmann, T., Hamar, J., Rogge, M., Zoerr, C., Erhard, S., & Philipp Schmidt, J. (2023) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/acf0ef · Cited by 106
Empirical Modeling of Lithium-ion Batteries Based on Electrochemical Impedance Spectroscopy Tests
Samadani, E., Farhad, S., Scott, W., Mastali, M., Gimenez, L. E., Fowler, M. W., & Fraser, R. A. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.02.021 · Cited by 123
Data science: Accelerating innovation and discovery in chemical engineering
Beck, D. A. C., Carothers, J. M., Subramanian, V. R., & Pfaendtner, J. (2016) · AIChE Journal · doi:10.1002/aic.15192 · Cited by 120
Influence of Cell-to-Cell Variations on the Inhomogeneity of Lithium-Ion Battery Modules
Rumpf, K., Rheinfeld, A., Schindler, M. W., Keil, J., Schua, T., & Jossen, A. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0111811jes · Cited by 112
Kupper, C., Weißhar, B., Rißmann, S., & Bessler, W. G. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0941814jes · Cited by 112
“Briefly, this model is an extended “Newman-type” 25 description of a lithium-ion battery cell.”
Li, H., Liu, B., Zhou, D., & Zhang, C. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/aba96f · Cited by 102
Li, C., Cui, N., Wang, C., & Zhang, C. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.229900 · Cited by 112
Review of State Estimation and Remaining Useful Life Prediction Methods for Lithium–Ion Batteries
Zhao, J., Zhu, Y., Zhang, B., Liu, M., Wang, J., Liu, C., & Hao, X. (2023) · Sustainability · doi:10.3390/su15065014 · Cited by 117
“Different mathematical functions are used to describe battery capacity deterioration trend Most empirical models for RUL estimation are developed based on a single exponential model [70], a double exponential model [71], a linear model [72], a polynomial model [73], a Verhulst model [74], etc.”
MethodXiao, Y., Yang, F., Gao, Z., Liu, M., Wang, J., Kou, Z., Lin, Y., Li, Y., Gao, L., Chen, Y., et al. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.107145 · Cited by 104
Modeling stresses in the separator of a pouch lithium-ion cell
Shi, D., Xiao, X., Huang, X., & Kia, H. G. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.05.026 · Cited by 106
Cai, L., & White, R. E. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3486082 · Cited by 104
Ngandjong, A. C., Rucci, A., Maiza, M., Shukla, G., Vázquez-Arenas, J. G., & Franco, A. A. (2017) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.7b02647 · Cited by 99
Research Progress of Lithium Plating on Graphite Anode in Lithium‐Ion Batteries
Hu, D., Chen, L., Tian, J., Su, Y., Li, N., Chen, G., Hu, Y., Dou, Y., Chen, S., & Wu, F. (2020) · Chinese Journal of Chemistry · doi:10.1002/cjoc.202000512 · Cited by 113
Charge/Discharge Simulation of an All-Solid-State Thin-Film Battery Using a One-Dimensional Model
Fabre, S. D., Guy-Bouyssou, D., Bouillon, P., et al. (2011) · Journal of The Electrochemical Society · doi:10.1149/2.041202jes · Cited by 101
Nikolian, A., Firouz, Y., Gopalakrishnan, R., Timmermans, J.-M., Omar, N., Van den Bossche, P., & Van Mierlo, J. (2016) · Energies · doi:10.3390/en9050360 · Cited by 101
“Depending on the knowledge of the specific material composition and the properties of the chemical reactions, a set of physical equations were originally developed [35,36].”
BackgroundMathematical model for thermal behavior of lithium ion battery pack under overcharge
Qi, C., Zhu, Y., Gao, F., Yang, K., & Jiao, Q. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.03.100 · Cited by 109
An ultra-fast charging strategy for lithium-ion battery at low temperature without lithium plating
Qin, Y., Zuo, P., Chen, X., Yuan, W., Huang, R., Yang, X., Du, J., Lu, L., Han, X., & Ouyang, M. (2022) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2022.05.010 · Cited by 104
Lithium-ion battery digitalization: Combining physics-based models and machine learning
Amiri, M. N., Håkansson, A., Burheim, O. S., & Lamb, J. J. (2024) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2024.114577 · Cited by 125
“In this model, electrodes are described as porous environments containing many spherical particles, with electrolyte filling the spaces between particles [61].”
BackgroundDai, Y., Cai, L., & White, R. E. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.08.113 · Cited by 103
Simplified electrochemical multi-particle model for LiFePO4 cathodes in lithium-ion batteries
Majdabadi, M. M., Farhad, S., Farkhondeh, M., et al. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.11.066 · Cited by 101
Mathematical modelling of ionic transport in the electrolyte of Li-ion batteries
Danilov, D. L., & Notten, P. H. L. (2008) · Electrochimica Acta · doi:10.1016/j.electacta.2008.02.086 · Cited by 103
Bridging physics-based and equivalent circuit models for lithium-ion batteries
Geng, Z., Wang, S., Lacey, M. J., Brandell, D., & Thiringer, T. (2021) · Electrochimica Acta · doi:10.1016/j.electacta.2021.137829 · Cited by 105
“[13] T.F. Fuller , M. Doyle , J. Newman , Simulation and optimization of the dual lithium ion insertion cell, Journal of the Electrochemical Society 141 (1) (1994) 1–10 .”
MethodInfluentialLearning heterogeneous reaction kinetics from X-ray videos pixel by pixel
Zhao, H., Deng, H., Cohen, A. E., Lim, J., Li, Y., Fraggedakis, D., Jiang, B., Storey, B. D., Chueh, W. C., Braatz, R. D., et al. (2023) · Nature · doi:10.1038/s41586-023-06393-x · Cited by 107
De, S., Northrop, P. W. C., Ramadesigan, V., & Subramanian, V. R. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.11.035 · Cited by 107
Adaptive thermal modeling of Li-ion batteries
Rad, M. S., Danilov, D. L., Baghalha, M., Kazemeini, M., & Notten, P. H. L. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.03.167 · Cited by 108
Power prediction from a battery state estimator that incorporates diffusion resistance
Wang, S., Verbrugge, M. W., Wang, J. S., & Liu, P. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.04.070 · Cited by 99
Electrochemical model based charge optimization for lithium-ion batteries
Pramanik, S., & Anwar, S. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.01.096 · Cited by 104
Li, J., Wang, D., Deng, L., Cui, Z., Lyu, C., Wang, L., & Pecht, M. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101538 · Cited by 99
Bi, Y., & Choe, S.-Y. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.113925 · Cited by 103
A review of safety considerations for batteries in aircraft with electric propulsion
Sripad, S., Bills, A., & Viswanathan, V. (2021) · MRS Bulletin · doi:10.1557/s43577-021-00097-1 · Cited by 109
Review of parameterisation and a novel database (LiionDB) for continuum Li-ion battery models
Wang, A. A., O’Kane, S. E. J., Planella, F. B., Houx, J. L., O’Regan, K. B., Zyskin, M., Edge, J. S., Monroe, C. W., Cooper, S. J., Howey, D. A., et al. (2022) · Progress in Energy · doi:10.1088/2516-1083/ac692c · Cited by 130
“The original DFN publications included 1+ ∂ ln f±/∂ ln ce in their model formulation, but assumed ideality because thermodynamic data was unavailable [5, 6].”
InfluentialLin, C., Popov, B. N., & Ploehn, H. J. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1431575 · Cited by 107
A Linearized Model for Lithium Ion Batteries and Maps for their Performance and Failure
Purkayastha, R. T., & McMeeking, R. M. (2012) · Journal of Applied Mechanics · doi:10.1115/1.4005962 · Cited by 96
Röder, F., Sonntag, S., Schröder, D., & Krewer, U. (2016) · Energy Technology · doi:10.1002/ente.201600232 · Cited by 103
Operando Visualization of Morphological Dynamics in All‐Solid‐State Batteries
Wu, X., Billaud, J. M., Jerjen, I., Marone, F., Ishihara, Y., Adachi, M., Adachi, Y., Villevieille, C., & Kato, Y. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901547 · Cited by 105
Wu, L., Liu, K., & Pang, H. (2020) · Electrochimica Acta · doi:10.1016/j.electacta.2020.137604 · Cited by 95
A Nonlinear Observer SOC Estimation Method Based on Electrochemical Model for Lithium-Ion Battery
Liu, Y., Ma, R., Pang, S., Xu, L., Zhao, D., Wei, J., Huangfu, Y., & Gao, F. (2021) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2020.3040140 · Cited by 97
“The detailed mathematics description and derivation of P2D model are introduced in [15].”
MethodVashisht, S., Rakshit, D., Panchal, S., Fowler, M. W., & Fraser, R. A. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.107797 · Cited by 97
Thermal Modeling of Large Format Lithium-Ion Cells
Nieto, N., Díaz, L., Gastelurrutia, J., Álava, I., Blanco, F., Ramos, J. C., & Rivas, A. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.042302jes · Cited by 108
Design considerations of sub-mW indoor light energy harvesting for wireless sensor systems
Wang, W. S., O’Donnell, T., Wang, N., Hayes, M., O’Flynn, B., & O’Mathúna, C. (2008) · ACM Journal on Emerging Technologies in Computing Systems · doi:10.1145/1773814.1773817 · Cited by 109
“In practice, however, the battery lifetime is even shorter due to leakage currents, temperature fluctuations, environmental humidity, and other variable factors [Doyle et al. 1993].”
Comparison of LiFePO[sub 4] from Different Sources
Striebel, K. A., Shim, J., Srinivasan, V. N., et al. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1862477 · Cited by 98
Self-citationTheory of Water Desalination with Intercalation Materials
Singh, K., Bouwmeester, H. J. M., de Smet, L. C. P. M., Bazant, M. Z., & Biesheuvel, P. M. (2018) · Physical Review Applied · doi:10.1103/physrevapplied.9.064036 · Cited by 97
“This approach is mathematically different from models developed for (Li-ion) batteries, which incorporate a solution-phase potential as the driving force for transport of cations [33].”
MethodFerraro, M. E., Trembacki, B. L., Brunini, V., Noble, D. R., & Roberts, S. A. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab632b · Cited by 105
A Reduced-Order Electrochemical Model for All-Solid-State Batteries
Deng, Z., Hu, X., Lin, X., Xu, L., Li, J., & Guo, W. (2020) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2020.3026962 · Cited by 96
“The electrodes of conventional lithium-ion batteries are filled with liquid electrolyte, and a pseudo-2-D model based on the porous electrode theory has been established to simulate its behavior [5], [6].”
BackgroundModel Order Reduction Techniques for Physics-Based Lithium-Ion Battery Management: A Survey
Li, Y., Karunathilake, D., Vilathgamuwa, D. M., Mishra, Y., Farrell, T., Choi, S. S., & Zou, C. (2021) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2021.3100318 · Cited by 112
“introduced a basic multiscale modeling framework for Li-ion batteries that is commonly referred to as the pseudo-2D (P2D) model or Doyle–Fuller–Newman model [16]– [18].”
MethodKim, J., Chun, H., Kim, M., Han, S., Lee, J.-W., & Lee, T.-K. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.103077 · Cited by 110
Stochastic Analysis of Diffusion Induced Damage in Lithium-Ion Battery Electrodes
Barai, P., & Mukherjee, P. P. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.132306jes · Cited by 98
Yu, H., Zhang, L., Wang, W., Li, S., Chen, S., Yang, S., Li, J., & Liu, X. (2023) · Energy · doi:10.1016/j.energy.2023.127846 · Cited by 96
Mao, J., Dai, K., Xuan, M., et al. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b00877 · Cited by 96
Erhard, S. V., Osswald, P. J., Keil, P., Höffer, E., Haug, M., Noel, A., Wilhelm, J., Rieger, B., Schmidt, K., Kosch, S., et al. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0551701jes · Cited by 97
Advances in modeling and simulation of Li–air batteries
Tan, P., Kong, W., Shao, Z., Liu, M., & Ni, M. (2017) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2017.06.001 · Cited by 100
Mastali, M., Foreman, E., Modjtahedi, A., et al. (2018) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2018.03.004 · Cited by 96
A parameter estimation method for a simplified electrochemical model for Li-ion batteries
Li, J., Wang, L., Lyu, C., Liu, E., Xing, Y., & PECHT, M. G. (2018) · Electrochimica Acta · doi:10.1016/j.electacta.2018.04.098 · Cited by 96
Habedank, J. B., Kraft, L., Rheinfeld, A., Krezdorn, C., Jossen, A., & Zaeh, M. F. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.1181807jes · Cited by 107
Deterministic models of Li-ion battery aging: It is a matter of scale
Jafari, M., Khan, K., & Gauchía, L. (2018) · Journal of Energy Storage · doi:10.1016/j.est.2018.09.002 · Cited by 118
Rahmani, P., Chakraborty, S., Mele, I., Katrašnik, T., Bernhard, S., Prüfling, S., Wilkins, S., & Hegazy, O. (2024) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.235827 · Cited by 122
“Majority of current state-of-the-art electrochemical models use so-called pseudo-2D approach (P2D) developed by Doyle et al., in 1993 [94] and schematically represented in Fig.”
Modeling and simulation of lithium-ion batteries
Martínez-Rosas, E., Vasquez-Medrano, R. C., & Flores‐Tlacuahuac, A. (2011) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2011.05.007 · Cited by 99
On Dynamic Reconfiguration of a Large-Scale Battery System
Kim, H., & Shin, K. G. (2009) · IEEE Real-Time and Embedded Technology and Applications Symposium (RTAS) · doi:10.1109/rtas.2009.13 · Cited by 103
“We simulate the battery dynamics using Dualfoil [10] which is widely used for designing multiple battery systems [6, 18].”
MethodDigital Twin‐Driven All‐Solid‐State Battery: Unraveling the Physical and Electrochemical Behaviors
Park, J., Kim, K. T., Oh, D. Y., et al. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202001563 · Cited by 95
Li, X., Huang, Z., Tian, J., & Tian, Y. (2021) · Energy · doi:10.1016/j.energy.2021.119767 · Cited by 94
Xu, L., Deng, Z., Xie, Y., Lin, X., & Hu, X. (2023) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2022.3212024 · Cited by 94
“The P2D model is one of the most widely used and validated battery electrochemical models [20].”
MethodYang, L., He, M.-J., Ren, Y.-T., Gao, B.-H., & Qi, H. (2025) · Applied Energy · doi:10.1016/j.apenergy.2025.126427 · Cited by 118
A design optimization methodology for Li+ batteries
Golmon, S., Maute, K. K., & Dunn, M. L. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.12.025 · Cited by 95
New method for parameter estimation of an electrochemical-thermal coupling model for LiCoO2 battery
Li, J., Wang, L., Lyu, C., Wang, H., & Liu, X. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.12.058 · Cited by 94
Modeling and Estimation for Advanced Battery Management
Lin, X., Kim, Y., Mohan, S. N., Siegel, J. B., & Stefanopoulou, A. G. (2019) · Annual Review of Control Robotics and Autonomous Systems · doi:10.1146/annurev-control-053018-023643 · Cited by 112
Unified quantum theory of electrochemical kinetics by coupled ion–electron transfer
Bazant, M. Z. (2023) · Faraday Discussions · doi:10.1039/d3fd00108c · Cited by 121
Effects of Non-Uniform Current Distribution on Energy Density of Li-Ion Cells
Zhang, G., Shaffer, C. E., Wang, C., & Rahn, C. D. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.061311jes · Cited by 91
Appiah, W. A., Park, J., Song, S., Byun, S., Ryou, M., & Lee, Y. M. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.04.052 · Cited by 97
Electrochemical Kinetics of SEI Growth on Carbon Black: Part II. Modeling
Das, S., Attia, P. M., Chueh, W. C., & Bazant, M. Z. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0241904jes · Cited by 117
Ruan, H., Sun, B., Jiang, J., Zhang, W., He, X., Su, X., Bian, J., & Gao, W. (2021) · Electrochimica Acta · doi:10.1016/j.electacta.2021.139066 · Cited by 92
A Figure of Merit for Fast-Charging Li-ion Battery Materials
Xia, H., Zhang, W., Cao, S., et al. (2022) · ACS Nano · doi:10.1021/acsnano.2c03922 · Cited by 93
Doyle, M., Newman, J. S., & Reimers, J. N. (1994) · Journal of Power Sources · doi:10.1016/0378-7753(94)02012-4 · Cited by 93
Self-citationXavier, M. A., & Trimboli, M. S. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.03.074 · Cited by 95
Effect of tab design on large-format Li-ion cell performance
Zhao, W., Luo, G., & Wang, C. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.12.146 · Cited by 95
Spatially Resolved Modeling of Microstructurally Complex Battery Architectures
García, R. E., & Chiang, Y. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2754072 · Cited by 99
A computational multi-node electro-thermal model for large prismatic lithium-ion batteries
Pan, Y.-W., Hua, Y., Zhou, S., He, R., Zhang, Y., Yang, S., Liu, X., Lian, Y., Yan, X., & Wu, B. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228070 · Cited by 91
Hess, A., Roode-Gutzmer, Q. I., Heubner, C., Schneider, M., Michaelis, A., Bobeth, M., & Cuniberti, G. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.07.080 · Cited by 91
Melcher, A. M., Ziebert, C., Rohde, M., & Seifert, H. J. (2016) · Energies · doi:10.3390/en9040292 · Cited by 94
Jin, N., Danilov, D. L., den Hof, P. M. J. V., & Donkers, M. C. F. (2018) · International Journal of Energy Research · doi:10.1002/er.4022 · Cited by 102
Electrochemical-thermal P2D aging model of a LiCoO2/graphite cell: Capacity fade simulations
Lamorgese, A. G., Mauri, R., & Tellini, B. (2018) · Journal of Energy Storage · doi:10.1016/j.est.2018.08.011 · Cited by 92
“Particularly in the latter category, it should be acknowledged that a number of methods have been employed to discretize the spatial coordinates in the P2D model, including finite differences [21, 39], Galerkin-based collocation [64], orthogonal collocation on finite elements [65], and orthogonal collocation with coor…”
BackgroundMethodInfluentialMechanistic underpinnings of thermal gradient induced inhomogeneity in lithium plating
Fear, C., Parmananda, M., Kabra, V., Carter, R., Love, C. T., & Mukherjee, P. P. (2020) · Energy storage materials · doi:10.1016/j.ensm.2020.11.029 · Cited by 94
Practical identifiability of electrochemical P2D models for lithium-ion batteries
Laue, V., Röder, F., & Krewer, U. (2021) · Journal of Applied Electrochemistry · doi:10.1007/s10800-021-01579-5 · Cited by 101
Chen, Z., Danilov, D. L., Raijmakers, L. H. J., Chayambuka, K., Jiang, M. Z., Zhou, L., Zhou, J., Eichel, R., & Notten, P. H. L. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.230345 · Cited by 94
Luo, W., Lyu, C., Wang, L., & Zhang, L. (2012) · Microelectronics Reliability · doi:10.1016/j.microrel.2012.11.002 · Cited by 92
Controls oriented reduced order modeling of solid-electrolyte interphase layer growth
Randall, A. V., Perkins, R. D., Zhang, X., & Plett, G. L. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.02.114 · Cited by 89
Dynamic Modeling of Li-Ion Batteries Using an Equivalent Electrical Circuit
Dong, T. K., Kirchev, A., Mattera, F., Kowal, J., & Bultel, Y. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3543710 · Cited by 102
Design of a lithium-ion battery pack for PHEV using a hybrid optimization method
Xue, N., Du, W., Greszler, T. A., Shyy, W., & Martins, J. R. R. A. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.10.044 · Cited by 107
“The porous electrodes, which are comprised of solid active materials and liquid electrolyte, are modeled as a continuum medium [5].”
BackgroundMethodAn enhanced circuit-based model for single-cell battery
Zhang, J., Ci, S., Sharif, H., & Alahmad, M. (2010) · 2010 Twenty-Fifth Annual IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2010.5433597 · Cited by 90
“In physical models, differential equations have been used to capture the complex electrical-chemical process in a battery [ 2 ].”
MethodDesign and Demonstration of Three-Electrode Pouch Cells for Lithium-Ion Batteries
An, S. J., Li, J., Daniel, C., Kalnaus, S., & Wood, D. L. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0031709jes · Cited by 91
Ganser, M., Hildebrand, F., Kamlah, M., & McMeeking, R. M. (2019) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2019.01.004 · Cited by 90
Electrochemical model of lithium-ion battery for wide frequency range applications
Zhang, Q., Wang, D., Yang, B., Cui, X., & Li, X. (2020) · Electrochimica Acta · doi:10.1016/j.electacta.2020.136094 · Cited by 89
Metadata
- Authors
- Doyle, M., Fuller, T. F., & Newman, J.
- Affiliations
- Lawrence Berkeley National Laboratory (US)
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 1993-06-01
- Volume
- 140
- Issue
- 6
- Pages
- 1526-1533
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2113449668
- Cited by
- 4,328
- References
- 13
- Citations by year
- 2026: 466 · 2025: 496 · 2024: 401 · 2023: 374 · 2022: 303 · 2021: 306 · 2020: 288 · 2019: 212 · 2018: 190 · 2017: 183 · 2016: 165 · 2015: 150 · 2014: 150 · 2013: 144 · 2012: 109
- FWCI
- 6.42
- Type
- journal article
- Language
- en
- Open access
- bronze
- doi.org
- Licence
- iopscience.iop.org/page/copyright (vor, 9685 d)
- iopscience.iop.org/info/page/text-and-data-mining (tdm, 9685 d)
- Locations
- Journal of The Electrochemical Society (publishedVersion)
- Funders
- U.S. Department of Energy
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Battery Materials
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Battery Materials and Technologies
- Physical Sciences › Engineering › Automotive Engineering › Battery Modeling and Management
- Keywords
- lithium batteries, solid polymer electrolytes, concentrated solution theory, lithium metal anode, superposition method, electrolyte transport, composite cathode, lithium salts
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.