Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell
Open accessThe DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
Abstract
The galvanostatic charge and discharge of a lithium anode/solid polymer separator/insertion cathode cell is modeled using concentrated solution theory. The model is general enough to include a wide range of polymeric separator materials, lithium salts, and composite insertion cathodes. Insertion of lithium into the active cathode material is simulated using superposition, thus greatly simplifying the numerical calculations. Variable physical properties are permitted in the model. The results of a simulation of the charge/discharge behavior of the system are presented. Criteria are established to assess the importance of diffusion in the solid matrix and transport in the electrolyte. Consideration is also given to various procedures for optimization of the utilization of active cathode material.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“According to their outcomes, KF output is superior to RLS [91].”
In the citing paper
“Electrochemical models are somewhat more accurate than the classical acoustic ones as being based on the description of the battery's inner chemical processes such as lithium ions diffusion of within the electrodes and the electrolyte [31].”
From Review Paper for SOC Estimation Techniques: Challenges and Future Areas for Improvement (2024) · cites this paper as [31]
Citations
Cites
(1996) · Journal of Power Sources · doi:10.1016/s0378-7753(97)81054-3 · Cited by 463
Experimental Determination of the Transport Number of Water in Nafion 117 Membrane
Fuller, T. F., & Newman, J. (1992) · Journal of The Electrochemical Society · doi:10.1149/1.2069407 · Cited by 278
Self-citationAssessment of Polymer‐Electrolyte Batteries for EV and Ambient Temperature Applications
Gauthier, M., Fauteux, D., Vassort, G., Bélanger, A., Duval, M., Ricoux, P., Chabagno, J. M., Muller, D. A., Rigaud, P., Armand, M. B., et al. (1985) · Journal of The Electrochemical Society · doi:10.1149/1.2114112 · Cited by 156
Formation of a passivating film at the lithium-PEO-LiCF3SO3 interface
Fauteux, D. (1985) · Solid State Ionics · doi:10.1016/0167-2738(85)90061-x · Cited by 134
The fabrication and performance of all solid state polymer-based rechargeable lithium cells
Hooper, A. J., & North, J. M. (1983) · Solid State Ionics · doi:10.1016/0167-2738(83)90146-7 · Cited by 124
Laminar Boundary Layer Flows with Surface Reactions
Acrivos, A., & Chambré, P. L. (1957) · Industrial & Engineering Chemistry · doi:10.1021/ie50570a037 · Cited by 100
Status of rechargeable positive electrodes for ambient temperature lithium batteries
Abraham, K. M. (1981) · Journal of Power Sources · doi:10.1016/0378-7753(81)80058-4 · Cited by 88
A Polymeric Electrolyte Rechargeable Lithium Battery
Bonino, F., Ottaviani, M., Scrosati, B., et al. (1988) · Journal of The Electrochemical Society · doi:10.1149/1.2095538 · Cited by 72
Lithium Electrode/PEO‐Based Polymer Electrolyte Interface Behavior Between 60° and 120°C
Fauteux, D. (1988) · Journal of The Electrochemical Society · doi:10.1149/1.2096244 · Cited by 64
Performance of polymer electrolyte cells at +25 to +100°C
Munshi, M. (1988) · Solid State Ionics · doi:10.1016/0167-2738(88)90244-5 · Cited by 62
Cited by
Items 701–800 of 1,016
Barzacchi, L., Lagnoni, M., Rienzo, R. D., Bertei, A., & Baronti, F. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.104213 · Cited by 84
Roadmap on Li-ion battery manufacturing research
Grant, P. S., Greenwood, D., Pardikar, K., et al. (2022) · Journal of Physics Energy · doi:10.1088/2515-7655/ac8e30 · Cited by 77
Chen, H., Kalamaras, E., Abaza, A., Tripathy, Y., Page, J., & Barai, A. (2023) · Applied Energy · doi:10.1016/j.apenergy.2023.121610 · Cited by 80
Energy storage technology and its impact in electric vehicle: Current progress and future outlook
Waseem, M., Lakshmi, G. S., Ahmad, M., & Suhaib, M. (2024) · Next Energy · doi:10.1016/j.nxener.2024.100202 · Cited by 104
Zadin, V., Kasemägi, H., Aabloo, A., & Brandell, D. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.02.056 · Cited by 79
Li, J., Zou, L., Tian, F., Dong, X., Zou, Z., & Yang, H. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0861608jes · Cited by 77
State estimation of lithium-ion cells using a physicochemical model based extended Kalman filter
Sturm, J., Ennifar, H., Erhard, S. V., Rheinfeld, A., Kosch, S., & Jossen, A. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.04.011 · Cited by 78
“As the original DUALFOIL model from the Newman group [13] serves as the reference for this work, the first approximation scheme is its inbuilt Duhamel Superposition Integral (DSI).”
BackgroundMethodInfluentialKraft, L., Habedank, J. B., Frank, A., Rheinfeld, A., & Jossen, A. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0062001jes · Cited by 83
A lithium-ion battery electrochemical–thermal model for a wide temperature range applications
Wang, D., Huang, H., Tang, Z. G., Zhang, Q., Yang, B., & Bi, Z. (2020) · Electrochimica Acta · doi:10.1016/j.electacta.2020.137118 · Cited by 74
Zhang, J., Wang, P., Gong, Q., & Cheng, Z. (2021) · Journal of Power Electronics · doi:10.1007/s43236-021-00307-8 · Cited by 81
Fang, R., Dong, P., Ge, H., Fu, J., Li, Z., & Zhang, J. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.103013 · Cited by 82
Li, W., Yue, F., Ringbeck, F., Jöst, D., & Sauer, D. U. (2021) · Applied Energy · doi:10.1016/j.apenergy.2021.118114 · Cited by 80
An electrochemical impedance model of lithium-ion battery for electric vehicle application
Zhang, Q., Wang, D., Yang, B., Dong, H., Zhu, C., & Hao, Z. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.104182 · Cited by 81
Machine-Learning-Driven Advanced Characterization of Battery Electrodes
Finegan, D. P., Squires, I., Dahari, A., Kench, S., Jungjohann, K., & Cooper, S. J. (2022) · ACS Energy Letters · doi:10.1021/acsenergylett.2c01996 · Cited by 76
Dhir, S., Jagger, B., Maguire, A., & Pasta, M. (2023) · Nature Communications · doi:10.1038/s41467-023-39523-0 · Cited by 92
Zhu, G., Kong, C., Wang, J. V., Kang, J., Wang, Q., & Qian, C. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.108649 · Cited by 80
Semi-supervised adversarial deep learning for capacity estimation of battery energy storage systems
Yao, J., Chang, Z., Han, T., & Tian, J. (2024) · Energy · doi:10.1016/j.energy.2024.130882 · Cited by 80
Advances in degradation mechanism and sustainable recycling of LiFePO4-type lithium-ion batteries
Qi, C., Yao, T., Zhai, W., Zhang, M., Song, L., & He, J. (2024) · Energy storage materials · doi:10.1016/j.ensm.2024.103623 · Cited by 104
Kupper, C., & Bessler, W. G. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0761702jes · Cited by 92
Rucci, A., Ngandjong, A. C., Primo, E. N., Maiza, M., & Franco, A. A. (2019) · Electrochimica Acta · doi:10.1016/j.electacta.2019.04.110 · Cited by 73
Multi-physics safety model based on structure damage for lithium-ion battery under mechanical abuse
Li, Y., Wenwei, W., Lin, C. W., Xiaoguang, Y., & Fenghao, Z. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.124094 · Cited by 75
Zhang, X., Li, P., Huang, B., & Zhang, H. (2022) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2022.123449 · Cited by 81
Lithium-ion intercalation by coupled ion-electron transfer
Zhang, Y. A., Fraggedakis, D., Gao, T., Pathak, S., Zhuang, D., Grosu, C., Samantaray, Y., Neto, A. R. C., Duggirala, S. R., Huang, B., et al. (2025) · Science · doi:10.1126/science.adq2541 · Cited by 106
Effective Transport Properties of LiMn 2 O 4 Electrode via Particle-Scale Modeling
Gupta, A. K., Seo, J. H., Zhang, X., Du, W., Sastry, A. M., & Shyy, W. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3560441 · Cited by 74
Kjell, M. H., Zavalis, T. G., Behm, M., & Lindbergh, G. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.054309jes · Cited by 74
Dawson-Elli, N., Lee, S. B., Pathak, M., Mitra, K., & Subramanian, V. R. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.1391714jes · Cited by 81
Tang, Y., Wu, L., Wei, W. F., Wen, D., Guo, Q., Liang, W., & Li, X. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.03.067 · Cited by 77
Assessment of all-solid-state lithium-ion batteries
Braun, P., Uhlmann, C., Weiss, M., Weber, A., & Ivers‐Tiffée, E. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.04.111 · Cited by 75
Zhao, R., Kollmeyer, P. J., Lorenz, R. D., & Jahns, T. M. (2019) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2018.2874588 · Cited by 75
“More sophisticated physics-based electrochemical models, which include nonlinear processes such as the BV charge transfer process [14] and the diffusion process [15], have also been investigated widely.”
BackgroundLiu, P., Xu, R., Liu, Y., Lin, F., & Zhao, K. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab78fa · Cited by 74
Yang, T., Mok, K.-T., Tan, S.-C., Lee, C.-K., & Hui, S. Y. R. (2016) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2016.2602869 · Cited by 74
“Sophisticated battery models can generally be classified into two types, namely the electrochemical models [15]–[17] and equivalent circuit models (electrical models) [18]–[20].”
BackgroundOptimal Design of Li-Ion Batteries through Multi-Physics Modeling and Multi-Objective Optimization
Liu, C., & Liu, L. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0291711jes · Cited by 80
“E3254 Journal of The Electrochemical Society, 164 (11) E3254-E3264 (2017)”
BackgroundInfluentialKogularasu, S., Akilarasan, M., Chen, S., Elanthamilan, E., Johnson, P. M., Chen, T.-W., Al-Hemaid, F. M. A., Ali, M. A., & Elshikh, M. S. (2018) · Electrochimica Acta · doi:10.1016/j.electacta.2018.09.028 · Cited by 76
Hinz, H. (2019) · Inventions · doi:10.3390/inventions4030041 · Cited by 85
“The first studies on thermal models were presented by Newman and Pals [32,33].”
MethodUsseglio‐Viretta, F. L. E., Finegan, D. P., Colclasure, A. M., Heenan, T. M. M., Abraham, D. P., Shearing, P. R., & Smith, K. A. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab913b · Cited by 79
Wu, L., Liu, K., Liu, J., & Pang, H. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.107182 · Cited by 76
Optimization of a Single Lithium-Ion Battery Cell with a Gradient-Based Algorithm
Xue, N., Du, W., Gupta, A. K., Shyy, W., Sastry, A. M., & Martins, J. R. R. A. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.036308jes · Cited by 87
Yuan, S., Jiang, L., Yin, C., Wu, H., & Zhang, X. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.03.060 · Cited by 75
Energy efficient battery management
Chiasserini, C. F., & Rao, R. R. (2002) · IEEE Conference on Computer Communications (INFOCOM) · doi:10.1109/infcom.2000.832212 · Cited by 74
“Several electrochemical models can be found in the literature for different battery technologies [1], [9], [12].”
BackgroundMethodEvaluation of The Electrochemo-Mechanically Induced Stress in All-Solid-State Li-Ion Batteries
Tian, H., Chakraborty, A., Talin, A. A., Eisenlohr, P., & Qi, Y. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab8f5b · Cited by 76
Wassiliadis, N., Kriegler, J., Gamra, K. A., & Lienkamp, M. (2023) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.232586 · Cited by 83
Modeling, estimation, and control challenges for lithium-ion batteries
Chaturvedi, N. A., Klein, R., Christensen, J., Ahmed, J., & Kojić, A. (2010) · Proceedings of the ... American Control Conference/Proceedings of the American Control Conference · doi:10.1109/acc.2010.5531623 · Cited by 86
“Previous work in this field [9], [10], [11], [12] avoids such detailed mathematical constructions since their primary aim is cell-optimization using numerical simulations.”
BackgroundXu, M., Wang, R., Reichman, B., et al. (2018) · Journal of Energy Storage · doi:10.1016/j.est.2018.09.004 · Cited by 73
Khalik, Z., Donkers, M. C. F., Sturm, J., & Bergveld, H. J. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.229901 · Cited by 77
Zheng, S., Teh, J., Alharbi, B., & Lai, C. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.113908 · Cited by 91
State estimation of a reduced electrochemical model of a lithium-ion battery
Klein, R., Chaturvedi, N. A., Christensen, J., Ahmed, J., Findeisen, R., & Kojić, A. (2010) · Proceedings of the ... American Control Conference/Proceedings of the American Control Conference · doi:10.1109/acc.2010.5531378 · Cited by 73
“The governing equations are given by (see also [1], [9])”
BackgroundMethodQuantification of bottlenecks to fast charging of lithium-ion-insertion cells for electric vehicles
Chandrasekaran, R. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.07.106 · Cited by 72
Mathematical modeling of the electrochemical impedance spectroscopy in lithium ion battery cycling
Xie, Y., Li, J., & Yuan, C. Y. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2014.02.035 · Cited by 72
Liu, C., Gao, Y., & Liu, L. (2020) · International Journal of Energy Research · doi:10.1002/er.5924 · Cited by 79
Kadem, O., & Kim, J. (2023) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2023.3244623 · Cited by 81
“The electrochemical models use several coupled differential equations to describe the electrochemical process in the battery [13].”
MethodWang, S., Verbrugge, M. W., Wang, J. S., & Liu, P. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.06.078 · Cited by 70
Intercalate Diffusion in Multiphase Electrode Materials and Application to Lithiated Graphite
Baker, D. R., & Verbrugge, M. W. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.002208jes · Cited by 70
Purkayastha, R. T., & McMeeking, R. M. (2012) · Computational Mechanics · doi:10.1007/s00466-012-0724-8 · Cited by 69
“As an example, porous electrode theory [26] has been extensively used to represent the complex microstructure of the battery in a 1-D approximation [7,27,28].”
MethodLi, X., Fan, G., Pan, K., Guo, W. P., Zhu, C., Rizzoni, G., & Canova, M. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.09.049 · Cited by 71
A theoretical analysis of the optimal electrode thickness and porosity
Haverkort, J. W. (2018) · Electrochimica Acta · doi:10.1016/j.electacta.2018.10.065 · Cited by 81
Schneider, S. F., Bauer, C., Novák, P., & Berg, E. J. (2019) · Sustainable Energy & Fuels · doi:10.1039/c9se00427k · Cited by 85
Ouyang, T., Xu, P., Chen, J., Lu, J., & Chen, N. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3044725 · Cited by 69
“[11], which lays the foundation of electrochemical models.”
BackgroundMultiscale design optimization of lithium ion batteries using adjoint sensitivity analysis
Golmon, S., Maute, K. K., & Dunn, M. L. (2012) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.4347 · Cited by 70
“Discharge curves generated by the electrochemical portion of this model have been qualitatively compared with experimental studies showing similar results.[14] The aforementioned battery model problem involves two distinct length-scales: the macroscale includes transport processes and mechanical deformation of the ano…”
MethodResultKemper, P., Li, S. E., & Kum, D. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.03.134 · Cited by 73
Nagpure, S. C., Bhushan, B., & Babu, S. S. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.001311jes · Cited by 76
Bergveld, H. J., Kruijt, W. S., & Notten, P. H. L. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(98)00188-8 · Cited by 70
Comparison of discretization methods applied to the single-particle model of lithium-ion batteries
Romero-Becerril, A., & Álvarez-Icaza, L. A. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.06.091 · Cited by 72
Northrop, P. W. C., Pathak, M., Rife, D., De, S., Santhanagopalan, S., & Subramanian, V. R. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0341506jes · Cited by 82
On Veracity of Macroscopic Lithium-Ion Battery Models
Arunachalam, H., Onori, S., & Battiato, I. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0771509jes · Cited by 75
“[7]”
Mastali, M., Farkhondeh, M., Farhad, S., Fraser, R. A., & Fowler, M. W. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.1151613jes · Cited by 69
Yu, X., Feng, Z., Ren, Y., Henn, D., Wu, Z., An, K., Bi, W., Fau, C., Li, C., & Harris, S. J. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.1251807jes · Cited by 71
Electron Backscatter Diffraction for Investigating Lithium-Ion Electrode Particle Architectures
Quinn, A. H., Moutinho, H. R., Usseglio‐Viretta, F. L. E., et al. (2020) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2020.100137 · Cited by 69
Tranter, T. G., Timms, R., Shearing, P. R., & Brett, D. J. L. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/abd44f · Cited by 76
Han, Z., Li, S., Xiong, R., et al. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202108669 · Cited by 69
Hashemzadeh, P., Désilets, M., Lacroix, M., & Jokar, A. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.104909 · Cited by 68
Design approaches for Li-ion battery packs: A review
Cicconi, P., & Kumar, P. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.109197 · Cited by 79
An intelligent battery management system (BMS) with end-edge-cloud connectivity – a perspective
Mulpuri, S. K., Sah, B., & Kumar, P. (2025) · Sustainable Energy & Fuels · doi:10.1039/d4se01238k · Cited by 81
Cobb, C. L., & Blanco, M. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.10.084 · Cited by 73
Simulation of heat generation in a reconstructed LiCoO2 cathode during galvanostatic discharge
Yan, B., Lim, C., Yin, L., & Zhu, L. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.03.132 · Cited by 75
Sakti, A., Gallagher, K. G., Sepulveda, N. A., Uçkun, C., Vergara, C., de Sisternes, F. J., Dees, D. W., & Botterud, A. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.12.063 · Cited by 72
Murbach, M. D., & Schwartz, D. T. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0301711jes · Cited by 76
Is There a Benefit in Employing Graded Electrodes for Lithium-Ion Batteries?
Qi, Y., Jang, T., Ramadesigan, V., Schwartz, D. T., & Subramanian, V. R. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1051713jes · Cited by 68
Development and evaluation of a new ammonia boiling based battery thermal management system
Al‐Zareer, M., Dinçer, İ., & Rosen, M. A. (2018) · Electrochimica Acta · doi:10.1016/j.electacta.2018.05.093 · Cited by 75
Zheng, Y., Gao, W., Han, X., Ouyang, M., Lu, L., & Guo, D. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2019.04.019 · Cited by 67
Bruch, M., Millet, L., Kowal, J., & Vetter, M. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.229513 · Cited by 66
Gao, X., Jia, Y., Zhang, W., Yuan, C., & Xu, J. (2022) · Applied Mechanics Reviews · doi:10.1115/1.4054566 · Cited by 69
Wang, Y., Zhu, J., Cao, L., Gopaluni, R. B., & Cao, Y. (2023) · Applied Energy · doi:10.1016/j.apenergy.2023.121660 · Cited by 72
Three‐dimensionai temperature and current distribution in a battery module
Verbrugge, M. W. (1995) · AIChE Journal · doi:10.1002/aic.690410619 · Cited by 91
Chu, Z., Plett, G. L., Trimboli, M. S., & Ouyang, M. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2019.100828 · Cited by 70
System-architectures for sensor networks issues, alternatives, and directions
Feng, J., Koushanfar, F., & Potkonjak, M. (2003) · IEEE International Conference on Computer Design: VLSI in Computers and Processors (ICCD) · doi:10.1109/iccd.2002.1106775 · Cited by 69
Electrothermal Modeling of Lithium-Ion Batteries for Electric Vehicles
Yang, Z., Patil, D., & Fahimi, B. (2019) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2018.2880138 · Cited by 67
“Researchers have spent years in understanding the electrochemistry so that the parameters can be modeled in an accurate manner [1]–[8].”
BackgroundScalable Dry Printing Manufacturing to Enable Long‐Life and High Energy Lithium‐Ion Batteries
Liu, J., Ludwig, B., Liu, Y., Zheng, Z., Wang, F., Tang, M., Wang, J., Wang, J., Pan, H., & Wang, Y. (2017) · Advanced Materials Technologies · doi:10.1002/admt.201700106 · Cited by 75
Recent insights into the electrochemical behavior of blended lithium insertion cathodes: A review
Heubner, C., Liebmann, T., Schneider, M., & Michaelis, A. (2018) · Electrochimica Acta · doi:10.1016/j.electacta.2018.02.165 · Cited by 69
Mesgarnejad, A., & Karma, A. (2019) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2019.103696 · Cited by 67
“A more general study can be done by prescribing the value of the flux on the surface at a given voltage as using the Butler-Volmer equation to model reaction kinetics on the cathodic surface of the particle [45].”
MethodTechnology of electrochemical impedance spectroscopy for an energy-sustainable society
Nara, H., Yokoshima, T., & Ōsaka, T. (2020) · Current Opinion in Electrochemistry · doi:10.1016/j.coelec.2020.02.026 · Cited by 68
Full-cycle electrochemical-thermal coupling analysis for commercial lithium-ion batteries
Nie, P., Zhang, S., Ran, A., Yang, C., Chen, S., Li, Z., Zhang, X., Deng, W., Liu, T., Kang, F., et al. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.116258 · Cited by 67
Spingler, F. B., Friedrich, S., Kücher, S., Schmid, S., López-Cruz, D., & Jossen, A. (2021) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ac33e1 · Cited by 66
Zhao, Y., Kücher, S., & Jossen, A. (2022) · Electrochimica Acta · doi:10.1016/j.electacta.2022.141174 · Cited by 67
Method of Predicting SOH and RUL of Lithium-Ion Battery Based on the Combination of LSTM and GPR
Zhao, J., Zhu, Y., Zhang, B., Liu, M., Wang, J., Liu, C., & Zhang, Y. (2022) · Sustainability · doi:10.3390/su141911865 · Cited by 74
“The pseudo two-dimensional (P2D) [5] model describes the internal dynamic mechanism of lithium-ion batteries through a series of partial differential equations (PDE).”
BackgroundYu, H., Zhang, H., Zhang, Z., & Yang, S. (2025) · eTransportation · doi:10.1016/j.etran.2025.100420 · Cited by 86
Analytic Bound on Accuracy of Battery State and Parameter Estimation
Lin, X., & Stefanopoulou, A. G. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0791509jes · Cited by 70
“[18]”
Study of lithium diffusivity in amorphous silicon via finite element analysis
Wang, M., Xiao, X., & Huang, X. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.12.082 · Cited by 67
Jokar, A., Rajabloo, B., Désilets, M., & Lacroix, M. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0191614jes · Cited by 78
“[9] Sp = 3εp Vp Rp , SOCp = csur f s,p”
BackgroundJiang, Z., Qu, Z., Zhou, L., & Tao, W. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.10.125 · Cited by 67
Advances in Integrated Vehicle Thermal Management and Numerical Simulation
Wang, Y., Gao, Q., Zhang, T., Wang, G., Jiang, Z., & Li, Y. (2017) · Energies · doi:10.3390/en10101636 · Cited by 70
“In order to save computation time, a simplified co-simulated semi-empirical electrical and thermal model was proposed by Newman and Tiedemann [193,194], which assumed that the inner electrolyte cannot move [195].”
Background
Metadata
- Authors
- Doyle, M., Fuller, T. F., & Newman, J.
- Affiliations
- Lawrence Berkeley National Laboratory (US)
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 1993-06-01
- Volume
- 140
- Issue
- 6
- Pages
- 1526-1533
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2113449668
- Cited by
- 4,328
- References
- 13
- Citations by year
- 2026: 466 · 2025: 496 · 2024: 401 · 2023: 374 · 2022: 303 · 2021: 306 · 2020: 288 · 2019: 212 · 2018: 190 · 2017: 183 · 2016: 165 · 2015: 150 · 2014: 150 · 2013: 144 · 2012: 109
- FWCI
- 6.42
- Type
- journal article
- Language
- en
- Open access
- bronze
- doi.org
- Licence
- iopscience.iop.org/page/copyright (vor, 9685 d)
- iopscience.iop.org/info/page/text-and-data-mining (tdm, 9685 d)
- Locations
- Journal of The Electrochemical Society (publishedVersion)
- Funders
- U.S. Department of Energy
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Battery Materials
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Battery Materials and Technologies
- Physical Sciences › Engineering › Automotive Engineering › Battery Modeling and Management
- Keywords
- lithium batteries, solid polymer electrolytes, concentrated solution theory, lithium metal anode, superposition method, electrolyte transport, composite cathode, lithium salts
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.