The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
In-Situ Detection of Lithium Plating Using High Precision Coulometry
Open accessAbstract
Plating of metallic lithium on the negative electrode in lithium-ion batteries can dramatically reduce cell lifetime, impact cell safety and must be avoided during normal cell operation. Due to the low efficiency of the lithium plating/stripping process relative to the intercalation/deintercalation of lithium from graphite, small amounts of lithium plating can be detected through high accuracy measurements of coulombic efficiency. In this study, coulombic efficiency versus charging rate was measured at different temperatures and for two cell types. Small changes to the coulombic efficiency during cycling resulting from small amounts of lithium plating during the charging process were detected using a high precision charger. Cells were disassembled and examined to confirm the presence of lithium plating at the rates predicted to cause plating. This work shows how high precision coulometry can be used to maximize the performance of the cell through battery management by varying the maximum charge rate as a function of temperature to avoid lithium plating.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The effect of the charging protocol on the cycle life of a Li-ion battery
Zhang, S. S. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.06.040 · Cited by 644
Petzl, M., & Danzer, M. A. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.12.060 · Cited by 511
Smith, A. J., Burns, J. C., Trussler, S., & Dahn, J. R. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3268129 · Cited by 369
Self-citationStudy of the charging process of a LiCoO2-based Li-ion battery
Zhang, S. S., Xu, K., & Jow, T. R. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.02.087 · Cited by 346
Effects of Electrolyte Composition on Lithium Plating in Lithium-Ion Cells
Smart, M. C., & Ratnakumar, B. V. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3544439 · Cited by 262
Dahn, H. M., Smith, A. J., Burns, J. C., Stevens, D. A., & Dahn, J. R. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.013209jes · Cited by 246
Self-citationA High Precision Study of the Coulombic Efficiency of Li-Ion Batteries
Smith, A. J., Burns, J. C., & Dahn, J. R. (2010) · Electrochemical and Solid-State Letters · doi:10.1149/1.3487637 · Cited by 170
Self-citationIn Situ Detection of Lithium Plating on Graphite Electrodes by Electrochemical Calorimetry
Downie, L. E., Krause, L. J., Burns, J. C., Jensen, L. D., Chevrier, V. L., & Dahn, J. R. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.049304jes · Cited by 161
Self-citationImpedance Reducing Additives and Their Effect on Cell Performance
Burns, J. C., Sinha, N., Jain, G., Ye, H., VanElzen, C. M., Lamanna, W. M., Xiao, A., Scott, E. R., Choi, J. H., & Dahn, J. R. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.078207jes · Cited by 58
Self-citation
Cited by
Challenges and opportunities towards fast-charging battery materials
Liu, Y., Zhu, Y., & Cui, Y. (2019) · Nature Energy · doi:10.1038/s41560-019-0405-3 · Cited by 1,781
A review on the key issues of the lithium ion battery degradation among the whole life cycle
Han, X., Lu, L., Zheng, Y., Feng, X., Li, Z., Li, J., & Ouyang, M. (2019) · eTransportation · doi:10.1016/j.etran.2019.100005 · Cited by 1,745
Lithium-ion battery fast charging: A review
Tomaszewska, A., Chu, Z., Feng, X., O'Kane, S., Liu, X., Chen, J., Ji, C., Endler, E., Li, R., Liu, L., et al. (2019) · eTransportation · doi:10.1016/j.etran.2019.100011 · Cited by 1,592
Fast Charging of Lithium‐Ion Batteries: A Review of Materials Aspects
Weiss, M., Ruess, R., Kasnatscheew, J., Levartovsky, Y., Levy, N. R., Minnmann, P., Stolz, L., Waldmann, T., Wohlfahrt‐Mehrens, M., Aurbach, D., et al. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202101126 · Cited by 1,055
Opportunities and Challenges of Lithium Ion Batteries in Automotive Applications
Masias, A., Marcicki, J., & Paxton, W. A. (2021) · ACS Energy Letters · doi:10.1021/acsenergylett.0c02584 · Cited by 1,040
Yang, X.-G., Leng, Y., Zhang, G., Ge, S., & Wang, C.-Y. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.05.110 · Cited by 948
Li plating as unwanted side reaction in commercial Li-ion cells – A review
Waldmann, T., Hogg, B.-I., & Wohlfahrt-Mehrens, M. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.02.063 · Cited by 895
Building Safe Lithium-Ion Batteries for Electric Vehicles: A Review
Duan, J., Tang, X., Dai, H., Yang, Y., Wu, W., Wei, X., & Huang, Y. (2020) · Electrochemical Energy Reviews · doi:10.1007/s41918-019-00060-4 · Cited by 893
Optimizing Areal Capacities through Understanding the Limitations of Lithium-Ion Electrodes
Gallagher, K. G., Trask, S. E., Bauer, C., Woehrle, T., Lux, S. F., Tschech, M., Lamp, P., Polzin, B. J., Ha, S., Long, B., et al. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0321602jes · Cited by 646
Enabling fast charging – A battery technology gap assessment
Ahmed, S., Bloom, I., Jansen, A. N., Tanim, T., Dufek, E. J., Pesaran, A., Burnham, A., Carlson, R. B., Dias, F., Hardy, K., et al. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.06.055 · Cited by 498
Lithium Plating Mechanism, Detection, and Mitigation in Lithium-Ion Batteries
Lin, X., Khosravinia, K., Hu, X., Li, J., & Lu, W. (2021) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2021.100953 · Cited by 490
Review—“Knees” in Lithium-Ion Battery Aging Trajectories
Attia, P. M., Bills, A., Brosa Planella, F., Dechent, P., dos Reis, G., Dubarry, M., Gasper, P., Gilchrist, R., Greenbank, S., Howey, D., et al. (2022) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ac6d13 · Cited by 488
Understanding undesirable anode lithium plating issues in lithium-ion batteries
Liu, Q., Du, C., Shen, B., Zuo, P., Cheng, X., Ma, Y., Yin, G., & Gao, Y. (2016) · RSC Advances · doi:10.1039/c6ra19482f · Cited by 473
Review on state-of-health of lithium-ion batteries: Characterizations, estimations and applications
Yang, S., Zhang, C., Jiang, J., Zhang, W., Zhang, L., & Wang, Y. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.128015 · Cited by 435
Hu, W., Peng, Y., Wei, Y., & Yang, Y. (2023) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.3c00033 · Cited by 429
Asymmetric Temperature Modulation for Extreme Fast Charging of Lithium-Ion Batteries
Yang, X.-G., Liu, T., Gao, Y., Ge, S., Leng, Y., Wang, D., & Wang, C.-Y. (2019) · Joule · doi:10.1016/j.joule.2019.09.021 · Cited by 393
Understanding the trilemma of fast charging, energy density and cycle life of lithium-ion batteries
Yang, X.-G., & Wang, C.-Y. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.09.069 · Cited by 365
Waldmann, T., Iturrondobeitia, A., Kasper, M., Ghanbari, N., Aguesse, F., Bekaert, E., Daniel, L., Genies, S., Gordon, I. J., Löble, M. W., et al. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.1211609jes · Cited by 328
Challenges and development of lithium-ion batteries for low temperature environments
Piao, N., Gao, X., Yang, H., Guo, Z., Hu, G., Cheng, H.-M., & Li, F. (2022) · eTransportation · doi:10.1016/j.etran.2021.100145 · Cited by 324
von Lüders, C., Zinth, V., Erhard, S. V., Osswald, P. J., Hofmann, M., Gilles, R., & Jossen, A. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.12.032 · Cited by 311
Zhang, G., Wei, X., Tang, X., Zhu, J., Chen, S., & Dai, H. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.110790 · Cited by 308
Ye, J., Chen, H., Wang, Q., Huang, P., Sun, J., & Lo, S. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.08.124 · Cited by 304
Challenges and opportunities toward fast-charging of lithium-ion batteries
Xie, W., Liu, X., He, R., Li, Y., Gao, X., Li, X., Peng, Z., Feng, S., Feng, X., & Yang, S. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101837 · Cited by 303
A review of thermal management for Li-ion batteries: Prospects, challenges, and issues
Shahjalal, M., Shams, T., Islam, M. E., Alam, W., Modak, M., Hossain, S. B., Ramadesigan, V., Ahmed, M. R., Ahmed, H., & Iqbal, A. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.102518 · Cited by 303
50C Fast‐Charge Li‐Ion Batteries using a Graphite Anode
Sun, C., Ji, X., Weng, S., Li, R., Huang, X., Zhu, C., Xiao, X., Deng, T., Fan, L., Chen, L., et al. (2022) · Advanced Materials · doi:10.1002/adma.202206020 · Cited by 289
Thermal Runaway Triggered by Plated Lithium on the Anode after Fast Charging
Li, Y., Feng, X., Ren, D., Ouyang, M., Lu, L., & Han, X. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b16589 · Cited by 280
Low‐Temperature Electrolyte Design for Lithium‐Ion Batteries: Prospect and Challenges
Li, Q., Liu, G., Cheng, H., Sun, Q., Zhang, J., & Ming, J. (2021) · Chemistry – A European Journal · doi:10.1002/chem.202101407 · Cited by 268
Ecker, M., Shafiei Sabet, P., & Sauer, D. U. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.08.034 · Cited by 181
Logarithmic Data Processing Can Be Used Justifiably in the Plotting of a Calibration Curve
Kong, D., Zhao, J., Tang, S., Shen, W., & Lee, H. K. (2021) · Analytical Chemistry · doi:10.1021/acs.analchem.1c02011 · Cited by 119
The Dilemma of C-Rate and Cycle Life for Lithium-Ion Batteries under Low Temperature Fast Charging
Gao, Z., Xie, H., Yang, X., Niu, W., Li, S., & Chen, S. (2022) · Batteries · doi:10.3390/batteries8110234 · Cited by 70
Metadata
- Authors
- Burns, J. C., Stevens, D. A., & Dahn, J. R.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2015
- Volume
- 162
- Issue
- 6
- Pages
- A959-A964
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2165413597
- Cited by
- 357
- References
- 9
- FWCI
- 18.10
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.