The DOI matches its Crossref record; 98 of the 98 references it cites were found in a registry or an index.
Review—Practical Challenges Hindering the Development of Solid State Li Ion Batteries
Open accessAbstract
Solid state electrolyte systems boasting Li + conductivity of >10 mS cm −1 at room temperature have opened the potential for developing a solid state battery with power and energy densities that are competitive with conventional liquid electrolyte systems. The primary focus of this review is twofold. First, differences in Li penetration resistance in solid state systems are discussed, and kinetic limitations of the solid state interface are highlighted. Second, technological challenges associated with processing such systems in relevant form factors are elucidated, and architectures needed for cell level devices in the context of product development are reviewed. Specific research vectors that provide high value to advancing solid state batteries are outlined and discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Dash, R. K., & Pannala, S. (2016) · Scientific Reports · doi:10.1038/srep27449 · Cited by 108
RetractedA lithium superionic conductor
Kamaya, N., Homma, K., Yamakawa, Y., Hirayama, M., Kanno, R., Yonemura, M., Kamiyama, T., Kato, Y., Hama, S., Kawamoto, K., et al. (2011) · Nature Materials · doi:10.1038/nmat3066 · Cited by 4,978
Lithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
Lithium battery chemistries enabled by solid-state electrolytes
Manthiram, A., Yu, X., & Wang, S. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.103 · Cited by 4,689
A solid future for battery development
Janek, J., & Zeier, W. G. (2016) · Nature Energy · doi:10.1038/nenergy.2016.141 · Cited by 3,979
High-power all-solid-state batteries using sulfide superionic conductors
Kato, Y., Hori, S., Saito, T., Suzuki, K., Hirayama, M., Mitsui, A., Yonemura, M., Iba, H., & Kanno, R. (2016) · Nature Energy · doi:10.1038/nenergy.2016.30 · Cited by 3,517
Bachman, J. C., Muy, S., Grimaud, A., Chang, H.-H., Pour, N., Lux, S. F., Paschos, O., Maglia, F., Lupart, S., Lamp, P., et al. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00563 · Cited by 2,537
Arora, P., & Zhang, Z. (. (2004) · Chemical Reviews · doi:10.1021/cr020738u · Cited by 2,175
Negating interfacial impedance in garnet-based solid-state Li metal batteries
Han, X., Gong, Y., Fu, K., He, X., Hitz, G. T., Dai, J., Pearse, A., Liu, B., Wang, H., Rubloff, G., et al. (2017) · Nature Materials · doi:10.1038/nmat4821 · Cited by 2,025
19·9%‐efficient ZnO/CdS/CuInGaSe2 solar cell with 81·2% fill factor
Repins, I., Contreras, M. A., Egaas, B., DeHart, C., Scharf, J., Perkins, C. L., To, B., & Noufi, R. (2008) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.822 · Cited by 2,022
Structural Changes in Silicon Anodes during Lithium Insertion/Extraction
Obrovac, M. N., & Christensen, L. (2004) · Electrochemical and Solid-State Letters · doi:10.1149/1.1652421 · Cited by 1,995
The development and future of lithium ion batteries
Blomgren, G. E. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0251701jes · Cited by 1,940
Zhu, Y., He, X., & Mo, Y. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b07517 · Cited by 1,936
The Impact of Elastic Deformation on Deposition Kinetics at Lithium/Polymer Interfaces
Monroe, C., & Newman, J. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1850854 · Cited by 1,701
Recent advances in all-solid-state rechargeable lithium batteries
Sun, C., Liu, J., Gong, Y., Wilkinson, D. P., & Zhang, J. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.01.028 · Cited by 1,688
Interface Stability in Solid-State Batteries
Richards, W. D., Miara, L. J., Wang, Y., Kim, J. C., & Ceder, G. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04082 · Cited by 1,652
Electrolytes for solid-state lithium rechargeable batteries: recent advances and perspectives
Quartarone, E., & Mustarelli, P. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00081g · Cited by 1,607
The synergetic effect of lithium polysulfide and lithium nitrate to prevent lithium dendrite growth
Li, W., Yao, H., Yan, K., Zheng, G., Liang, Z., Chiang, Y.-M., & Cui, Y. (2015) · Nature Communications · doi:10.1038/ncomms8436 · Cited by 1,540
Self-citationGarnet-type solid-state fast Li ion conductors for Li batteries: critical review
Thangadurai, V., Narayanan, S., & Pinzaru, D. (2014) · Chemical Society Reviews · doi:10.1039/c4cs00020j · Cited by 1,534
A theory of the electrical breakdown of solid dielectrics
Zener, C. (1934) · Proceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character · doi:10.1098/rspa.1934.0116 · Cited by 1,425
Seino, Y., Ota, T., Takada, K., Hayashi, A., & Tatsumisago, M. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee41655k · Cited by 1,302
Sustainability and in situ monitoring in battery development
Grey, C. P., & Tarascon, J. M. (2017) · Nature Materials · doi:10.1038/nmat4777 · Cited by 1,213
Agrawal, R. C., & Pandey, G. P. (2008) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/41/22/223001 · Cited by 1,075
Progress and prospective of solid-state lithium batteries
Takada, K. (2013) · Acta Materialia · doi:10.1016/j.actamat.2012.10.034 · Cited by 1,056
Sulfide Solid Electrolyte with Favorable Mechanical Property for All-Solid-State Lithium Battery
Sakuda, A., Hayashi, A., & Tatsumisago, M. (2013) · Scientific Reports · doi:10.1038/srep02261 · Cited by 1,051
Zhu, Y., He, X., & Mo, Y. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta08574h · Cited by 1,045
Dead lithium: mass transport effects on voltage, capacity, and failure of lithium metal anodes
Chen, K.-H., Wood, K. N., Kazyak, E., LePage, W. S., Davis, A. L., Sanchez, A. J., & Dasgupta, N. P. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00371d · Cited by 1,007
Dahn, J. R. (1991) · Physical Review B · doi:10.1103/physrevb.44.9170 · Cited by 991
Solid‐State Redox Reactions of LiCoO2 (R3m) for 4 Volt Secondary Lithium Cells
Ohzuku, T., & Ueda, A. (1994) · Journal of The Electrochemical Society · doi:10.1149/1.2059267 · Cited by 951
New, Highly Ion‐Conductive Crystals Precipitated from Li2S–P2S5 Glasses
Mizuno, F., Hayashi, A., Tadanaga, K., & Tatsumisago, M. (2005) · Advanced Materials · doi:10.1002/adma.200401286 · Cited by 872
Novel lithium insertion material of LiCo1/3Ni1/3Mn1/3O2 for advanced lithium-ion batteries
Yabuuchi, N., & Ohzuku, T. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00173-3 · Cited by 870
Fu, K. (., Gong, Y., Liu, B., Zhu, Y., Xu, S., Yao, Y., Luo, W., Wang, C., Lacey, S. D., Dai, J., et al. (2017) · Science Advances · doi:10.1126/sciadv.1601659 · Cited by 842
Prospects for reducing the processing cost of lithium ion batteries
Wood, D. L., Li, J., & Daniel, C. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.11.019 · Cited by 827
Future generations of cathode materials: an automotive industry perspective
Andre, D., Kim, S.-J., Lamp, P., Lux, S. F., Maglia, F., Paschos, O., & Stiaszny, B. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00361j · Cited by 806
Batteries and Ultracapacitors for Electric, Hybrid, and Fuel Cell Vehicles
Burke, A. F. (2007) · Proceedings of the IEEE · doi:10.1109/jproc.2007.892490 · Cited by 791
A review of lithium and non-lithium based solid state batteries
Kim, J. G., Son, B., Mukherjee, S., Schuppert, N., Bates, A., Kwon, O., Choi, M. J., Chung, H. Y., & Park, S. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.02.054 · Cited by 783
All‐Solid‐State Lithium‐Ion Microbatteries: A Review of Various Three‐Dimensional Concepts
Oudenhoven, J. F. M., Baggetto, L., & Notten, P. H. L. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201000002 · Cited by 739
Physical ceramics: principles for ceramic science and engineering
(1996) · Choice Reviews Online · doi:10.5860/choice.34-1566 · Cited by 721
Lithium alloy negative electrodes
Huggins, R. A. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(99)00124-x · Cited by 717
Wang, C., Gong, Y., Liu, B., Fu, K., Yao, Y., Hitz, E., Li, Y., Dai, J., Xu, S., Luo, W., et al. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04695 · Cited by 682
A review on the status of anode materials for solid oxide fuel cells
Zhu, W., & Deevi, S. C. (2003) · Materials Science and Engineering A · doi:10.1016/s0921-5093(03)00620-8 · Cited by 663
Sakuda, A., Hayashi, A., & Tatsumisago, M. (2010) · Chemistry of Materials · doi:10.1021/cm901819c · Cited by 651
Luo, W., Gong, Y., Zhu, Y., Li, Y., Yao, Y., Zhang, Y., Fu, K. (., Pastel, G., Lin, C., Mo, Y., et al. (2017) · Advanced Materials · doi:10.1002/adma.201606042 · Cited by 651
Superionic Conductivity in Lithium-Rich Anti-Perovskites
Zhao, Y., & Daemen, L. L. (2012) · Journal of the American Chemical Society · doi:10.1021/ja305709z · Cited by 626
A General Discussion of Li Ion Battery Safety
(2012) · Electrochemical Society Interface · doi:10.1149/2.f03122if · Cited by 592
Structural change of Li2S–P2S5 sulfide solid electrolytes in the atmosphere
Muramatsu, H., Hayashi, A., Ohtomo, T., Hama, S., & Tatsumisago, M. (2010) · Solid State Ionics · doi:10.1016/j.ssi.2010.10.013 · Cited by 568
Cheng, L., Crumlin, E. J., Chen, W., Qiao, R., Hou, H., Franz Lux, S., Zorba, V., Russo, R., Kostecki, R., Liu, Z., et al. (2014) · Phys. Chem. Chem. Phys. · doi:10.1039/c4cp02921f · Cited by 545
Sharafi, A., Meyer, H. M., Nanda, J., Wolfenstine, J., & Sakamoto, J. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.10.053 · Cited by 536
Preparation of Li 2 S–P 2 S 5 Amorphous Solid Electrolytes by Mechanical Milling
Hayashi, A., Hama, S., Morimoto, H., Tatsumisago, M., & Minami, T. (2001) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2001.tb00685.x · Cited by 478
Anodes for Direct Oxidation of Dry Hydrocarbons in a Solid-Oxide Fuel Cell
Gorte, R. J., Park, S., Vohs, J. M., & Wang, C. (2000) · Advanced Materials · doi:10.1002/1521-4095(200010)12:19<1465::aid-adma1465>3.0.co;2-9 · Cited by 465
Interfacial Challenges in Solid-State Li Ion Batteries
Luntz, A. C., Voss, J., & Reuter, K. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b02352 · Cited by 461
Self-citationIonic conductivity in Li3N single crystals
Alpen, U. V., Rabenau, A., & Talat, G. H. (1977) · Applied Physics Letters · doi:10.1063/1.89283 · Cited by 437
Air-stable, high-conduction solid electrolytes of arsenic-substituted Li4SnS4
Sahu, G., Lin, Z., Li, J., Liu, Z., Dudney, N., & Liang, C. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee43357a · Cited by 434
Ohta, S., Komagata, S., Seki, J., Saeki, T., Morishita, S., & Asaoka, T. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.02.073 · Cited by 399
Electrochemical Window of the Li-Ion Solid Electrolyte Li7La3Zr2O12
Thompson, T., Yu, S., Williams, L., Schmidt, R. D., Garcia-Mendez, R., Wolfenstine, J., Allen, J. L., Kioupakis, E., Siegel, D. J., & Sakamoto, J. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00593 · Cited by 391
Aguesse, F., Manalastas, W. W., Buannic, L., del Amo, J. M. L., Singh, G., Llordés, A., & Kilner, J. A. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b13925 · Cited by 386
Kim, D. H., Oh, D. Y., Park, K. H., Choi, Y. E., Nam, Y. J., Lee, H. A., Lee, S.-M., & Jung, Y. S. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b00330 · Cited by 359
An Iodide-Based Li7P2S8I Superionic Conductor
Rangasamy, E., Liu, Z., Gobet, M., Pilar, K., Sahu, G., Zhou, W., Wu, H., Greenbaum, S., & Liang, C. (2015) · Journal of the American Chemical Society · doi:10.1021/ja508723m · Cited by 350
Kotobuki, M., Kanamura, K., Sato, Y., & Yoshida, T. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.04.047 · Cited by 342
Solution‐Processable Glass LiI‐Li4SnS4 Superionic Conductors for All‐Solid‐State Li‐Ion Batteries
Park, K. H., Oh, D. Y., Choi, Y. E., Nam, Y. J., Han, L., Kim, J., Xin, H. L., Lin, F., Oh, S. M., & Jung, Y. S. (2015) · Advanced Materials · doi:10.1002/adma.201505008 · Cited by 321
Ionic Conductivity and Air Stability of Al-Doped Li7La3Zr2O12 Sintered in Alumina and Pt Crucibles
Xia, W., Xu, B., Duan, H., Guo, Y., Kang, H., Li, H., & Liu, H. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b12186 · Cited by 308
Xu, C., Ahmad, Z., Aryanfar, A., Viswanathan, V., & Greer, J. R. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1615733114 · Cited by 302
Self-citationGarnet Solid Electrolyte Protected Li-Metal Batteries
Liu, B., Gong, Y., Fu, K., Han, X., Yao, Y., Pastel, G., Yang, C., Xie, H., Wachsman, E. D., & Hu, L. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b03887 · Cited by 287
Huggins, R. A., & Nix, W. D. (2000) · Ionics · doi:10.1007/bf02375547 · Cited by 282
McCloskey, B. D. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b01814 · Cited by 281
Alternative strategy for a safe rechargeable battery
Braga, M. H., Grundish, N. S., Murchison, A. J., & Goodenough, J. B. (2017) · Energy & Environmental Science · doi:10.1039/c6ee02888h · Cited by 279
Lithium Fast‐Ionic Conduction in Complex Hydrides: Review and Prospects
Matsuo, M., & Orimo, S. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201000012 · Cited by 276
Kinetics of Initial Lithiation of Crystalline Silicon Electrodes of Lithium-Ion Batteries
Pharr, M., Zhao, K., Wang, X., Suo, Z., & Vlassak, J. J. (2012) · Nano Letters · doi:10.1021/nl302841y · Cited by 256
Strategies Based on Nitride Materials Chemistry to Stabilize Li Metal Anode
Zhu, Y., He, X., & Mo, Y. (2017) · Advanced Science · doi:10.1002/advs.201600517 · Cited by 254
Miara, L., Windmüller, A., Tsai, C.-L., Richards, W. D., Ma, Q., Uhlenbruck, S., Guillon, O., & Ceder, G. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b09059 · Cited by 251
Eroglu, D., Zavadil, K. R., & Gallagher, K. G. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0611506jes · Cited by 224
Sakuda, A., Hayashi, A., Takigawa, Y., Higashi, K., & Tatsumisago, M. (2013) · Journal of the Ceramic Society of Japan · doi:10.2109/jcersj2.121.946 · Cited by 217
High performance lithium metal anode: Progress and prospects
Lang, J., Qi, L., Luo, Y., & Wu, H. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2017.01.006 · Cited by 215
Shin, B. R., Nam, Y. J., Oh, D. Y., Kim, D. H., Kim, J. W., & Jung, Y. S. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2014.08.139 · Cited by 214
Novel Li3ClO based glasses with superionic properties for lithium batteries
Braga, M. H., Ferreira, J. A., Stockhausen, V., Oliveira, J. E., & El-Azab, A. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta15087a · Cited by 208
Yi, E., Wang, W., Kieffer, J., & Laine, R. M. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta04492a · Cited by 178
Atomic Layer Deposition of the Solid Electrolyte Garnet Li7La3Zr2O12
Kazyak, E., Chen, K.-H., Wood, K. N., Davis, A. L., Thompson, T., Bielinski, A. R., Sanchez, A. J., Wang, X., Wang, C., Sakamoto, J., et al. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00944 · Cited by 177
Chen, R.-J., Zhang, Y.-B., Liu, T., Xu, B.-Q., Lin, Y.-H., Nan, C.-W., & Shen, Y. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b16304 · Cited by 176
Seino, Y., Ota, T., & Takada, K. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.03.090 · Cited by 166
All-solid-state lithium battery with LiBH4 solid electrolyte
Takahashi, K., Hattori, K., Yamazaki, T., Takada, K., Matsuo, M., Orimo, S., Maekawa, H., & Takamura, H. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.079 · Cited by 157
Rajendra, H. B., Ito, T., & Yamada, H. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0841704jes · Cited by 154
Haruyama, J., Sodeyama, K., & Tateyama, Y. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b08435 · Cited by 153
Kitaura, H., Hayashi, A., Ohtomo, T., Hama, S., & Tatsumisago, M. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm01090a · Cited by 149
The Effect of Stress on Battery-Electrode Capacity
Bucci, G., Swamy, T., Bishop, S. R., Sheldon, B. W., Chiang, Y., & Carter, W. C. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0371704jes · Cited by 148
Self-citationCold sintering process of Li 1.5 Al 0.5 Ge 1.5 (PO 4 ) 3 solid electrolyte
Berbano, S. S., Guo, J., Guo, H., Lanagan, M. T., & Randall, C. A. (2017) · Journal of the American Ceramic Society · doi:10.1111/jace.14727 · Cited by 142
Bron, P., Roling, B., & Dehnen, S. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.03.103 · Cited by 142
Visbal, H., Aihara, Y., Ito, S., Watanabe, T., Park, Y., & Doo, S. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.02.088 · Cited by 127
Scale-up method of planetary ball mill
Mio, H., Kano, J., & Saito, F. (2004) · Chemical Engineering Science · doi:10.1016/j.ces.2004.07.020 · Cited by 126
The breakdown of β-alumina ceramic electrolyte
Armstrong, R. D., Dickinson, T., & Turner, J. (1974) · Electrochimica Acta · doi:10.1016/0013-4686(74)85065-6 · Cited by 124
Solid electrolytes: main prospects of research and development
Yaroslavtsev, A. B. (2016) · Russian Chemical Reviews · doi:10.1070/rcr4634 · Cited by 120
Li+ Defects in a Solid-State Li Ion Battery: Theoretical Insights with a Li3OCl Electrolyte
Stegmaier, S., Voss, J., Reuter, K., & Luntz, A. C. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00659 · Cited by 107
Self-citationMatsuda, S., Kubo, Y., Uosaki, K., & Nakanishi, S. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00149 · Cited by 102
Temperature effects on cycling stability of Li plating/stripping on Ta-doped Li7La3Zr2O12
Yonemoto, F., Nishimura, A., Motoyama, M., Tsuchimine, N., Kobayashi, S., & Iriyama, Y. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.01.009 · Cited by 98
Lithium Redistribution in Lithium-Metal Batteries
Ferrese, A., Albertus, P. S., Christensen, J., & Newman, J. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.027210jes · Cited by 49
Enhancing Li-Ion Battery Safety by Early Detection of Nascent Internal Shorts
Sazhin, S. V., Dufek, E. J., & Gering, K. L. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0431701jes · Cited by 40
Ladpli, P., Kopsaftopoulos, F. P., Nardari, R., & Chang, F. (2017) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.2260107 · Cited by 33
Discovery of lithium in copper current collectors used in batteries
Nagpure, S. C., Downing, R. G., Bhushan, B., et al. (2012) · Scripta Materialia · doi:10.1016/j.scriptamat.2012.07.009 · Cited by 30
The Production and Processing of Inorganic Materials
Evans, J. W., & Jonghe, L. C. D. (2016) · Springer eBooks · doi:10.1007/978-3-319-48163-0 · Cited by 22
Cited by
Batteries and fuel cells for emerging electric vehicle markets
Cano, Z. P., Banham, D., Ye, S., Hintennach, A., Lu, J., Fowler, M., & Chen, Z. (2018) · Nature Energy · doi:10.1038/s41560-018-0108-1 · Cited by 2,873
Self-citationChallenges and opportunities towards fast-charging battery materials
Liu, Y., Zhu, Y., & Cui, Y. (2019) · Nature Energy · doi:10.1038/s41560-019-0405-3 · Cited by 1,781
High electronic conductivity as the origin of lithium dendrite formation within solid electrolytes
Han, F., Westover, A. S., Yue, J., Fan, X., Wang, F., Chi, M., Leonard, D. N., Dudney, N. J., Wang, H., & Wang, C. (2019) · Nature Energy · doi:10.1038/s41560-018-0312-z · Cited by 1,695
Benchmarking the performance of all-solid-state lithium batteries
Randau, S., Weber, D. A., Kötz, O., Koerver, R., Braun, P., Weber, A., Ivers-Tiffée, E., Adermann, T., Kulisch, J., Zeier, W. G., et al. (2020) · Nature Energy · doi:10.1038/s41560-020-0565-1 · Cited by 1,219
Garnet-Type Solid-State Electrolytes: Materials, Interfaces, and Batteries
Wang, C., Fu, K., Kammampata, S. P., McOwen, D. W., Samson, A. J., Zhang, L., Hitz, G. T., Nolan, A. M., Wachsman, E. D., Mo, Y., et al. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00427 · Cited by 1,212
Metadata
- Authors
- Kerman, K., Luntz, A., Viswanathan, V., Chiang, Y.-M., & Chen, Z.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2017
- Volume
- 164
- Issue
- 7
- Pages
- A1731-A1744
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2622248414
- Cited by
- 712
- References
- 98
- FWCI
- 31.44
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.