The DOI matches its Crossref record.
Fundamentals of Microfabrication
Abstract
Various matured fabrication technologies and processes for distinct mechatronic systems and their components are available. To fabricate conventional, mini-, and microscale electromechanical motion devices and ICs, distinct technologies, processes, and materials are used. Affordable, high-yield, and effective conventional technologies have been used for many decades to fabricate various high-performance electromechanical motion devices, while complementary metal oxide semiconductor (CMOS) technology ensured high-yield for power electronics and ICs [1-7]. Power electronics, ICs, actuators, and sensors are profoundly different. However, the majority of microelectromechanical systems (MEMS) can be fabricated enhancing CMOS technologies [8-10]. MEMS imply not simply integration of electromechanical and electronic components, but utilization of enhanced microelectronics technologies and application of enabling materials to guarantee high-yield mass-produced cost-efficient system fabrications and packaging. This chapter is aimed to introduce the reader to the basics of MEMS fabrication. Different techniques should be utilized taking into the account various system components and specification. We will center on the fabrication basics for microelectromechanical devices which can be integrated with ICs forming MEMS [11]. Core micromachining and microelectronics processes will be introduced. Micromachining, as a core fabrication technology, can be used to fabricate complex structures and devices which could be within micrometers in size. Integrated MEMS are composed from functional actuators, sensors, radiating energy devices, energy sources, ICs, etc. These MEMS can be fabricated utilizing different microfabrication technologies, e.g., CMOS, micromachining (bulk and surface), or high-aspect ratio processes. In contrast, the microelectronic components are fabricated using CMOS and biCMOS processes. The micromachining processes were developed as a well-defined sequence of steps to selectively etch away parts of the silicon wafer or other materials and deposit various structural and sacrificial layers of different materials forming mechanical, electromechanical, electro-opto-mechanical, electromagnetic, electrostatic, piezoelectric, and other devices and their components. For integrated MEMS, the main goal is to integrate microelectronics with micromachined electromechanical devices in order to design high-performance systems. To guarantee highperformance, affordability, reliability, andmanufacturability, well-developed CMOS-based batch-fabrication processes have been modified and enhanced. MEMS are packaged, and usually sealed, to protect them from harsh environments, prevent mechanical damage, Analysis, and Design with minimize stresses, vibrations, contamination, and electromagnetic interference. It is impossible to specify generic MEMS, fabrication, and packaging solutions due to distinct device physics and unlimited number of possible application-dependent solutions. Various fabrication techniques, processes, and materials must be applied to attain the desired performance, reliability, and cost. Bulk and surface micromachining, as well as high-aspect-ratio technologies such as Lithography-Galvanoforming-Molding (abbreviated as LIGA because it stands for Lithografie-Galvanik-Abformung in German), are the most developed fabrication methods. Silicon is the primary material which is used by the microelectronic industry. A single crystal ingot (solid cylinder hundreds millimeters in diameter and length) of very high purity silicon is grown, sawed to the desired thickness, and polished using chemical and mechanical polishing techniques. Electromagnetic and mechanical wafer properties depend on the orientation of the crystal growth, concentration and type of doped impurities. The major steps for ICs fabrication are diffusion, oxidation, photolithography, masking, deposition, etching, metallization, doping, planarization, packaging, and bonding. Extending conventional CMOS processing, additional processes and enablingmaterials are used to fabricateMEMS. There are a number of micromachining techniques which can be used in order to pattern and deposit thin films, as well as to shape silicon and other materials forming the needed microstructures and devices. Photolithography (lithography) is the process used to transfer the mask pattern (desired pattern, surface topography, and geometry) to a layer of radiation-or light-sensitive material (photoresist). Then, the pattern is transferred to the films or substrates through development, etching, and other processes. The major steps in lithography are the masks production (pattern=topography generation) and transfer of the pattern. Important photoresist characteristics are resolution, sensitivity, etch resistance, thermal stability, adhesion, viscosity, flash point, and toxicity. The photoresist processing includes dehydration baking and priming, coating, soft baking, exposure, developme
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Poly(dimethylsiloxane) as a Material for Fabricating Microfluidic Devices
McDonald, J. C., & Whitesides, G. M. (2002) · Accounts of Chemical Research · doi:10.1021/ar010110q · Cited by 2,454
Micro Total Analysis Systems. 1. Introduction, Theory, and Technology
Reyes, D. R., Iossifidis, D., Auroux, P.-A., & Manz, A. (2002) · Analytical Chemistry · doi:10.1021/ac0202435 · Cited by 2,191
What is the Young's Modulus of Silicon?
Hopcroft, M. A., Nix, W. D., & Kenny, T. W. (2010) · Journal of Microelectromechanical Systems · doi:10.1109/jmems.2009.2039697 · Cited by 2,119
Transport phenomena in nanofluidics
Schoch, R. B., Han, J., & Renaud, P. (2008) · Reviews of Modern Physics · doi:10.1103/revmodphys.80.839 · Cited by 1,933
Physics and Applications of Microfluidics in Biology
Beebe, D. J., Mensing, G. A., & Walker, G. M. (2002) · Annual Review of Biomedical Engineering · doi:10.1146/annurev.bioeng.4.112601.125916 · Cited by 1,800
Beyond molecules: Self-assembly of mesoscopic and macroscopic components
Whitesides, G. M., & Boncheva, M. (2002) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.082065899 · Cited by 1,616
Cho, S. K., Moon, H., & Kim, C.-J. (2003) · Journal of Microelectromechanical Systems · doi:10.1109/jmems.2002.807467 · Cited by 1,598
Effects of synthetic micro- and nano-structured surfaces on cell behavior
Flemming, R. G., Murphy, C. J., Abrams, G. A., Goodman, S. L., & Nealey, P. F. (1999) · Biomaterials · doi:10.1016/s0142-9612(98)00209-9 · Cited by 1,450
Quéré, D. (2005) · Reports on Progress in Physics · doi:10.1088/0034-4885/68/11/r01 · Cited by 1,249
Cantilever transducers as a platform for chemical and biological sensors
Lavrik, N. V., Sepaniak, M. J., & Datskos, P. G. (2004) · Review of Scientific Instruments · doi:10.1063/1.1763252 · Cited by 1,117
Mechanical regulation of cell function with geometrically modulated elastomeric substrates
Fu, J., Wang, Y.-K., Yang, M. T., Desai, R. A., Yu, X., Liu, Z., & Chen, C. S. (2010) · Nature Methods · doi:10.1038/nmeth.1487 · Cited by 1,073
Oxide Materials for Development of Integrated Gas Sensors—A Comprehensive Review
Eranna, G., Joshi, B. C., Runthala, D. P., & Gupta, R. P. (2004) · Critical Reviews in Solid State and Materials Sciences · doi:10.1080/10408430490888977 · Cited by 1,072
Laminar drag reduction in microchannels using ultrahydrophobic surfaces
Ou, J., Perot, B., & Rothstein, J. P. (2004) · Physics of Fluids · doi:10.1063/1.1812011 · Cited by 1,062
Opportunities for mesoscopics in thermometry and refrigeration: Physics and applications
Giazotto, F., Heikkilä, T. T., Luukanen, A., Savin, A. M., & Pekola, J. P. (2006) · Reviews of Modern Physics · doi:10.1103/revmodphys.78.217 · Cited by 1,058
Bioassay of prostate-specific antigen (PSA) using microcantilevers
Wu, G., Datar, R. H., Hansen, K. M., Thundat, T., Cote, R. J., & Majumdar, A. (2001) · Nature Biotechnology · doi:10.1038/nbt0901-856 · Cited by 1,013
Three‐Dimensional Battery Architectures
Long, J. W., Dunn, B., Rolison, D. R., & White, H. S. (2004) · ChemInform · doi:10.1002/chin.200451264 · Cited by 999
Advances in biomaterials, drug delivery, and bionanotechnology
Langer, R., & Peppas, N. A. (2003) · AIChE Journal · doi:10.1002/aic.690491202 · Cited by 966
Multifunctional surface structures of plants: An inspiration for biomimetics
Koch, K., Bhushan, B., & Barthlott, W. (2009) · Progress in Materials Science · doi:10.1016/j.pmatsci.2008.07.003 · Cited by 934
Microfluidic methods for generating continuous droplet streams
Christopher, G. F., & Anna, S. L. (2007) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/40/19/r01 · Cited by 860
McAllister, D. V., Wang, P. M., Davis, S. P., Park, J.-H., Canatella, P. J., Allen, M. G., & Prausnitz, M. R. (2003) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2331316100 · Cited by 859
Microelectromechanical systems (MEMS): fabrication, design and applications
Judy, J. W. (2001) · Smart Materials and Structures · doi:10.1088/0964-1726/10/6/301 · Cited by 828
Lab-on-a-chip devices for global health: Past studies and future opportunities
Chin, C. D., Linder, V., & Sia, S. K. (2007) · Lab Chip · doi:10.1039/b611455e · Cited by 811
Micro-, nano- and hierarchical structures for superhydrophobicity, self-cleaning and low adhesion
Bhushan, B., Jung, Y. C., & Koch, K. (2009) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2009.0014 · Cited by 806
Strained silicon as a new electro-optic material
Jacobsen, R. S., Andersen, K. N., Borel, P. I., Fage-Pedersen, J., Frandsen, L. H., Hansen, O., Kristensen, M., Lavrinenko, A. V., Moulin, G., Ou, H., et al. (2006) · Nature · doi:10.1038/nature04706 · Cited by 664
Microfabrication Inside Capillaries Using Multiphase Laminar Flow Patterning
Kenis, P. J. A., Ismagilov, R. F., & Whitesides, G. M. (1999) · Science · doi:10.1126/science.285.5424.83 · Cited by 659
Smart single-chip gas sensor microsystem
Hagleitner, C., Hierlemann, A., Lange, D., Kummer, A., Kerness, N., Brand, O., & Baltes, H. (2001) · Nature · doi:10.1038/35104535 · Cited by 619
Electrical Properties and Applications of Carbon Nanotube Structures
Bandaru, P. R. (2007) · Journal of Nanoscience and Nanotechnology · doi:10.1166/jnn.2007.307 · Cited by 598
Interdigital sensors and transducers
Mamishev, A. V., Sundara-Rajan, K., Yang, F., Du, Y., & Zahn, M. (2004) · Proceedings of the IEEE · doi:10.1109/jproc.2004.826603 · Cited by 578
Madou, M., Zoval, J., Jia, G., Kido, H., Kim, J., & Kim, N. (2006) · Annual Review of Biomedical Engineering · doi:10.1146/annurev.bioeng.8.061505.095758 · Cited by 568
A BioMEMS Review: MEMS Technology for Physiologically Integrated Devices
Grayson, A. C. R., Shawgo, R. S., Johnson, A. M., Flynn, N. T., Li, Y., Cima, M. J., & Langer, R. (2004) · Proceedings of the IEEE · doi:10.1109/jproc.2003.820534 · Cited by 562
Pelesko, J. A., & Bernstein, D. H. (2002) · CRC Press eBooks · doi:10.1201/9781420035292 · Cited by 518
New materials for micro-scale sensors and actuators
Wilson, S. A., Jourdain, R. P. J., Zhang, Q., Dorey, R. A., Bowen, C. R., Willander, M., Wahab, Q. U., Willander, M., Al-hilli, S. M., Nur, O., et al. (2007) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2007.03.001 · Cited by 514
Verpoorte, E., & De Rooij, N. F. (2003) · Proceedings of the IEEE · doi:10.1109/jproc.2003.813570 · Cited by 503
Broadband moth-eye antireflection coatings on silicon
Sun, C.-H., Jiang, P., & Jiang, B. (2008) · Applied Physics Letters · doi:10.1063/1.2870080 · Cited by 498
Polymer Microneedles for Controlled-Release Drug Delivery
Park, J.-H., Allen, M. G., & Prausnitz, M. R. (2006) · Pharmaceutical Research · doi:10.1007/s11095-006-0028-9 · Cited by 493
Fabrication Methods for Microfluidic Devices: An Overview
Scott, S., & Ali, Z. (2021) · Micromachines · doi:10.3390/mi12030319 · Cited by 479
Advances in 3D nano/microfabrication using two-photon initiated polymerization
Lee, K.-S., Kim, R. H., Yang, D.-Y., & Park, S. H. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.01.001 · Cited by 475
Micro reactors: principles and applications in organic synthesis
Fletcher, P. D. I., Haswell, S. J., Pombo-Villar, E., Warrington, B. H., Watts, P., Wong, S. Y. F., & Zhang, X. (2002) · Tetrahedron · doi:10.1016/s0040-4020(02)00432-5 · Cited by 468
Wu, H. Y., & Cheng, P. (2003) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(03)00035-8 · Cited by 463
Hierlemann, A., & Gutierrez-Osuna, R. (2008) · Chemical Reviews · doi:10.1021/cr068116m · Cited by 456
Evaluation of MEMS materials of construction for implantable medical devices
Kotzar, G., Freas, M., Abel, P., Fleischman, A., Roy, S., Zorman, C., Moran, J. M., & Melzak, J. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00007-8 · Cited by 439
Donnelly, R. F., Majithiya, R., Singh, T. R. R., Morrow, D. I. J., Garland, M. J., Demir, Y. K., Migalska, K., Ryan, E., Gillen, D., Scott, C. J., et al. (2011) · Pharmaceutical Research · doi:10.1007/s11095-010-0169-8 · Cited by 417
Recent developments in micromilling using focused ion beam technology
Tseng, A. A. (2004) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/14/4/r01 · Cited by 411
Unsteady aerodynamics and flow control for flapping wing flyers
Ho, S., Nassef, H., Pornsinsirirak, N., Tai, Y.-C., & Ho, C.-M. (2003) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2003.04.001 · Cited by 409
Nanoelectromechanical contact switches
Loh, O. Y., & Espinosa, H. D. (2012) · Nature Nanotechnology · doi:10.1038/nnano.2012.40 · Cited by 407
Three-Dimensional Photopatterning of Hydrogels Containing Living Cells
Liu, V. A., & Bhatia, S. N. (2002) · Biomedical Microdevices · doi:10.1023/a:1020932105236 · Cited by 399
MEMS actuators and sensors: observations on their performance and selection for purpose
Bell, D. J., Lu, T. J., Fleck, N. A., & Spearing, S. M. (2005) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/15/7/022 · Cited by 399
Microfluidics for flow cytometric analysis of cells and particles
Huh, D., Gu, W., Kamotani, Y., Grotberg, J. B., & Takayama, S. (2005) · Physiological Measurement · doi:10.1088/0967-3334/26/3/r02 · Cited by 396
Effects of artificial micro- and nano-structured surfaces on cell behaviour
Martínez, E., Engel, E., Planell, J. A., & Samitier, J. (2009) · Annals of Anatomy - Anatomischer Anzeiger · doi:10.1016/j.aanat.2008.05.006 · Cited by 394
Nanotechnology applications in pollution sensing and degradation in agriculture: a review
Baruah, S., & Dutta, J. (2009) · Environmental Chemistry Letters · doi:10.1007/s10311-009-0228-8 · Cited by 387
Bio-Microarray Fabrication Techniques—A Review
Barbulovic-Nad, I., Lucente, M., Sun, Y., Zhang, M., Wheeler, A. R., & Bussmann, M. (2006) · Critical Reviews in Biotechnology · doi:10.1080/07388550600978358 · Cited by 376
Fischer, A. C., Forsberg, F., Lapisa, M., Bleiker, S. J., Stemme, G., Roxhed, N., & Niklaus, F. (2015) · Microsystems & Nanoengineering · doi:10.1038/micronano.2015.5 · Cited by 363
Review on Micro- and Nanolithography Techniques and their Applications
Pimpin, A., & Srituravanich, W. (2012) · Engineering Journal · doi:10.4186/ej.2012.16.1.37 · Cited by 363
Xurography: rapid prototyping of microstructures using a cutting plotter
Bartholomeusz, D. A., Boutte, R. W., & Andrade, J. D. (2005) · Journal of Microelectromechanical Systems · doi:10.1109/jmems.2005.859087 · Cited by 360
Surface Plasmon Interference Nanolithography
Liu, Z.-W., Wei, Q.-H., & Zhang, X. (2005) · Nano Letters · doi:10.1021/nl0506094 · Cited by 359
Microcantilevers: Sensing Chemical Interactions via Mechanical Motion
Goeders, K. M., Colton, J. S., & Bottomley, L. A. (2008) · Chemical Reviews · doi:10.1021/cr0681041 · Cited by 351
Nanonails: A Simple Geometrical Approach to Electrically Tunable Superlyophobic Surfaces
Ahuja, A., Taylor, J. A., Lifton, V., Sidorenko, A. A., Salamon, T. R., Lobaton, E. J., Kolodner, P., & Krupenkin, T. N. (2008) · Langmuir · doi:10.1021/la702327z · Cited by 346
Microfabrication in Biology and Medicine
Voldman, J., Gray, M. L., & Schmidt, M. A. (1999) · Annual Review of Biomedical Engineering · doi:10.1146/annurev.bioeng.1.1.401 · Cited by 344
Microfabricated Microneedles for Gene and Drug Delivery
McAllister, D. V., Allen, M. G., & Prausnitz, M. R. (2000) · Annual Review of Biomedical Engineering · doi:10.1146/annurev.bioeng.2.1.289 · Cited by 335
Micro- and nanofluidics for DNA analysis
Tegenfeldt, J. O., Prinz, C., Huang, R. L., Austin, R. H., Chou, S. Y., Cox, E. C., Sturm, J. C., & Cao, H. (2004) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-004-2526-0 · Cited by 320
Polla, D. L., & Francis, L. F. (1998) · Annual Review of Materials Science · doi:10.1146/annurev.matsci.28.1.563 · Cited by 317
Application of Micro- and Nano-Electromechanical Devices to Drug Delivery
Staples, M., Daniel, K., Cima, M. J., & Langer, R. (2006) · Pharmaceutical Research · doi:10.1007/s11095-006-9906-4 · Cited by 311
Semiconductor Wires and Ribbons for High‐ Performance Flexible Electronics
Baca, A. J., Ahn, J., Sun, Y., Meitl, M. A., Menard, E., Kim, H., Choi, W. M., Kim, D., Huang, Y., & Rogers, J. A. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200703238 · Cited by 303
Heuschkel, M. O., Fejtl, M., Raggenbass, M., Bertrand, D., & Renaud, P. (2002) · Journal of Neuroscience Methods · doi:10.1016/s0165-0270(01)00514-3 · Cited by 291
Millimeter-Scale, Micro-Electro-Mechanical Systems Gas Turbine Engines
Epstein, A. H. (2004) · Journal of Engineering for Gas Turbines and Power · doi:10.1115/1.1739245 · Cited by 286
Yang, M. T., Fu, J., Wang, Y.-K., Desai, R. A., & Chen, C. S. (2011) · Nature Protocols · doi:10.1038/nprot.2010.189 · Cited by 274
Quality control and improvement for multistage systems: A survey
Shi, J., & Zhou, S. (2009) · IIE Transactions · doi:10.1080/07408170902966344 · Cited by 263
Malek, C. K., & Saile, V. (2004) · Microelectronics Journal · doi:10.1016/j.mejo.2003.10.003 · Cited by 263
Dunn-Rankin, D., Leal, E. M., & Walther, D. C. (2005) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2005.04.001 · Cited by 259
Review of MEMS-based drug delivery and dosing systems
Tsai, N.-C., & Sue, C.-Y. (2007) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2006.06.014 · Cited by 258
IC-Compatible Polysilicon Surface Micromachining
Sniegowski, J. J., & de Boer, M. P. (2000) · Annual Review of Materials Science · doi:10.1146/annurev.matsci.30.1.299 · Cited by 255
Metadata
- Venue
- Micromechatronics
- Publisher
- CRC Press
- Published
- 2016-04-19
- Pages
- 913-935
- OpenAlex
- W2888782157
- Cited by
- 2,109
- References
- 0
- FWCI
- 91.17
- Type
- book chapter
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.