Two-Way and Multiple-Way Shape Memory Polymers for Soft Robotics: An Overview
Open accessThe DOI matches its Crossref record; 300 of the 312 references it cites were found in a registry or an index; 37 of the 187 sources its claims cite were checked for support.
Abstract
Two-way and multiple-way shape memory polymers offer unique opportunities to realize untethered soft robots with programmable morphology and/or properties, repeatable actuation, and advanced multi-functionalities.
Overview
CoChat Summary
TL;DR
This review surveys thermo-responsive two-way and multiple-way shape memory polymers (SMPs) for programmable soft robotics, covering materials, manufacturing, working mechanisms, applications, and modeling/simulation. It concludes that these SMPs enable reversible and sequential shape changes, but real-world soft robotic examples remain limited and key manufacturing, characterization, and modeling gaps persist.
Key findings
- Two-way SMPs under constant stress include semi-crystalline networks and liquid crystalline elastomers (LCEs); semi-crystalline networks can show reversible strain variations between 10% and 100% under moderate stresses (typically hundreds of kPa to a few MPa), while LCEs may be strained up to 400%, exert stresses between 0.01 and 0.12 MPa, have elastic moduli between 0.1 and 5 MPa, and response times greater than 10 s.
- Stress-free two-way SMPs generally achieve recoverable actuation strains between 10% and 20%; two-way shape memory composites/laminates have limited reversible strain change, generally lower than 10%.
- Multiple-way SMPs can be designed by incorporating two or more well-separated transition temperatures or a broad glass/melting transition (temperature-memory effect); some multiple-SME SMPs reach strains of about 1000% with high shape fixity and recovery.
- For comparison, one-way SMPs may be strained up to about 800% before failure, have elastic-energy densities between 10 and 2000 MJ/m³ for strains approaching 200%, exert stresses between 0.1 and 10 MPa, and have response times greater than 10 s.
Methods
- Design: narrative review/overview of thermo-responsive two-way and multiple-way SMPs and their use in programmable soft robotics.
- Data/sample: published literature and reported examples of SMP-based soft robots and actuators; no primary experimental sample or dataset is introduced.
- Main analysis: thematic synthesis of base materials, manufacturing processes (including 3D/4D printing), working mechanisms (single-material and multi-material), applications, and modeling/simulation approaches.
Limitations
- The paper states that real-world programmable soft robots based on two-way and multiple-way SMPs remain few, that standards are lacking especially for 3D printed SMPs, and that manufacturing techniques for complex components are limited.
- The paper states that constitutive models for multiple-way and two-way SMPs are still limited, especially in the three-dimensional finite strain framework and for two-way LCEs and stress-free two-way SMPs; to the author’s knowledge, no works currently model the stress-free two-way SME.
- Evident from the text: this is a narrative overview rather than a systematic review or meta-analysis, and many quantitative claims are drawn from cited studies rather than from new experiments.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
29 Valid · 10 Not valid · 59 Not checked · 52 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“the first example of 3D printed multiple-way SMPs was provided by Wu et al. [206], who fabricated layered composite structures with SMPs having different glass transition temperatures, by using a multi-material Polyjet 3D printer.”
- Also stated in: § 3. Manufacturing · plain
“Following this idea, the first example of 3D printed multiple-way SMPs was provided by Wu et al. [206], who fabricated layered composite structures with SMPs having different glass transition temperatures, by using a multi-material Polyjet 3D printer.”
What the sources say
- Partly supportedcites [206] Wu, 2016, Multi-shape active composites by 3D printing of digital shape memory polymers, Sci. Rep. sourceExperimental — accuracy not yet measured
The Abstract (page unavailable) describes Wu et al.'s 3D-printed layered composites with SMP fibers having different glass transition temperatures and a multi-shape memory effect. Results > Design concepts and Methods > Fabrication of materials (pages unavailable) identify a multi-material Objet printer. The paper does not establish that this was the first example of 3D-printed multiple-way SMPs; it also mentions earlier work on 3D-printed digital SMPs that produced sequential shape changes. (LLM, conf=0.86)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Also stated in: § 3. Manufacturing · plain
Every source the paper cites for this claim was checked and supports it.
In the paper
“Mirtschin et al. [96] studied how programming parameters such as the strain rate and temperature holding time at the deformation temperature allow one to gain precise control of the TME in semi-crystalline polyurethanes and to design the TME under stress-free recovery conditions.”
What the sources say
- Supportedcites [96] Mirtschin, 2015, Designing temperature-memory effects in semicrystalline polyurethane, RSC Adv. source
The Conclusions state that changing strain rate and holding time at the deformation temperature provided precise control over temperature-memory behavior in semicrystalline polyurethane and allowed TMEs to be designed under stress-free recovery conditions. The Results and discussion also examine both programming parameters and stress-free recovery. (LLM, conf=0.95)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Such an approach has been largely employed to achieve multiple-way SMPs with a broad glass transition [82-92] and a broad melting transition [93-95] as the switching transition.”
What the sources say
- Not checked — no full text of the sourcecites [82] Miaudet, 2007, Shape and temperature memory of nanocomposites with broadened glass transition, Science source
- Not checked — no full text of the sourcecites [83] Xie, 2010, Tunable polymer multi-shape memory effect, Nature source
- Not checked — no full text of the sourcecites [84] Xie, 2011, Strain-Based Temperature Memory Effect for Nafion and Its Molecular Origins, Adv. Funct. Mater. source
- Not checked — no full text of the sourcecites [85] Li, 2012, A Versatile Polymer Co-Network with Broadened Glass Transition Showing Adjustable Multiple Shape Memory Effect, Macromol. Chem. Phys. source
- Not checked — no full text of the sourcecites [86] Shao, 2012, Multishape memory effect of norbornene-based copolymers with cholic acid pendant groups, Macromolecules source
- Partly supportedcites [87] Ware, 2012, Triple-shape memory polymers based on self-complementary hydrogen bonding, Macromolecules sourceExperimental — accuracy not yet measured
The Introduction (page unavailable) discusses multiple-shape memory and mentions a broad-transition example. But the Conclusions describe this paper’s own triple-shape system as using a glass transition together with hydrogen-bond dissociation—not a broad glass transition as the switching transition. The paper therefore supports the general multiple-shape context, but not the claimed approach for this system. (LLM, conf=0.85)
- Not checked — no full text of the sourcecites [88] Samuel, 2014, Designing multiple-shape memory polymers with miscible polymer blends: Evidence and origins of a triple-shape memory effect for miscible PLLA/PMMA blends, Macromolecules source
- Not checked — no full text of the sourcecites [89] Wang, 2015, Biocompound-based multiple shape memory polymers reinforced by photo-cross-linking, ACS Biomater. Sci. Eng. source
- Not checked — no full text of the sourcecites [90] Zhang, 2016, Triple-shape memory effects of bismaleimide based thermosetting polymer networks prepared via heterogeneous crosslinking structures, RSC Adv. source
- Not checked — no full text of the sourcecites [91] Zheng, 2017, Catalyst-free thermoset polyurethane with permanent shape reconfigurability and highly tunable triple shape memory performance, ACS Macro Lett. source
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The sources with a verdict support this claim; the rest weren’t checked yet, have no full text we could read, or their verdicts aren’t rated yet.
In the paper
“The two-stage cross-linking method has been used to fabricate stress-free two-way SMPs, i.e., class (ii); e.g., in [136-138].”
What the sources say
- Not checked — no full text of the sourcecites [136] Wu, 2014, Two-way shape memory polymer with “switch–spring” composition by interpenetrating polymer network, J. Mater. Chem. source
- Supportedcites [137] Meng, 2015, Shape actuation via internal stress-induced crystallization of dual-cure networks, ACS Macro Lett. source
The synthesis passage describes two stages of cross-linking, and the actuator passage reports reversible elongation and contraction after removal of the applied load. Figure 1 calls the resulting devices “stressfree actuators”; here, stress-free means no external load, not an absence of internal stress. (LLM, conf=0.94)
- Not checked — no full text of the sourcecites [138] Fan, 2017, A facile approach toward scalable fabrication of reversible shape-memory polymers with bonded elastomer microphases as internal stress provider, Macromol. Rapid Commun. source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“This strategy has also allowed for the development of laminated polymers with double SMP layers exhibiting two-way SME also under stress-free condition [154-156].”
What the sources say
- Partly supportedcites [154] Kang, 2012, Two-way actuation behavior of shape memory polymer/elastomer core/shell composites, Smart Mater. Struct. sourceExperimental — accuracy not yet measured
The Conclusions report reversible two-way actuation in SMPU/SBS core/shell composites, and the schematic in §2.1 labels heating and cooling as occurring at zero external stress. But §2.2 describes one SMPU film coated with an SBS elastomer, not a laminate with double SMP layers. The Introduction’s laminate example likewise pairs an SMP film with an elastomeric film. (LLM, conf=0.88)
- Not checked — no full text of the sourcecites [155] Imai, 2013, An actuator of two-way behavior by using two kinds of shape memory polymers with different Tgs, Precis. Eng. source
- Partly supportedcites [156] Taya, 2013, Design of two-way reversible bending actuator based on a shape memory alloy/shape memory polymer composite, Smart Mater. Struct. sourceExperimental — accuracy not yet measured
Section 3 (page unavailable) models a three-layer laminate with two outer SMP layers, and the Conclusion (page unavailable) reports repeatable two-way bending. The active center layer contains SMA wires, however, so the paper does not establish two-way shape memory in a polymer-only laminate. The cited passages also do not establish the claimed stress-free condition. (LLM, conf=0.82)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
58 more claims · 12 with their cited sources checked
Create a free account to see all 150 claims and every source verdict.
- It may state two separate claims as one. 48
- Probably not a substantial claim. 48
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ 2.3. Two-Way SMPs
“such that Tm ,1 > Tm ,2 .”
§ 2.3. Two-Way SMPs
“(v) heating the material up to Tm ,2 > T 3 > Tm ,1 under stress-free conditions.”
Citations
Cites
Williams, M. L., Landel, R. F., & Ferry, J. D. (1955) · Journal of the American Chemical Society · doi:10.1021/ja01619a008 · Cited by 8,083
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027 · cited 2×
“, origami, kirigami) [22,23], bio-inspired and bio-mimetics architectures [19,24,25], reinforced systems [26], and granular jamming [27].”
BackgroundAnalysis of Bi-Metal Thermostats
Timoshenko, S. (1925) · Journal of the Optical Society of America · doi:10.1364/josa.11.000233 · Cited by 2,426
An integrated design and fabrication strategy for entirely soft, autonomous robots
Wehner, M., Truby, R. L., Fitzgerald, D. J., Mosadegh, B., Whitesides, G. M., Lewis, J. A., & Wood, R. J. (2016) · Nature · doi:10.1038/nature19100 · Cited by 2,127
Programmable and adaptive mechanics with liquid crystal polymer networks and elastomers
White, T. J., & Broer, D. J. (2015) · Nature Materials · doi:10.1038/nmat4433 · Cited by 1,744
Soft robotics: Technologies and systems pushing the boundaries of robot abilities
Laschi, C., Mazzolai, B., & Cianchetti, M. (2016) · Science Robotics · doi:10.1126/scirobotics.aah3690 · Cited by 1,570 · cited 1×
“In fact, robots based on soft materials (widely known as soft robots) are able to withstand large deformations, perform complex motions, conform to arbitrary geometries, and sustain impacts without damage, and thus they are particularly suited to those applications where a safe interaction with people, fragile objects…”
BackgroundShape-memory polymers and their composites: stimulus methods and applications
Leng, J., Lan, X., Liu, Y., & Du, S. (2011) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.03.001 · Cited by 1,495
Biomedical applications of soft robotics
Cianchetti, M., Laschi, C., Menciassi, A., & Dario, P. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0022-y · Cited by 1,435
Tunable polymer multi-shape memory effect
Xie, T. (2010) · Nature · doi:10.1038/nature08863 · Cited by 1,380
Soft Actuators for Small-Scale Robotics
Hines, L., Petersen, K., Lum, G. Z., & Sitti, M. (2017) · Advanced Materials · doi:10.1002/adma.201603483 · Cited by 1,337 · cited 6×
“Finally, it is worth mentioning that thermally-induced SMPs may be directly triggered by heating with hot gas or water, but indirect heating has been also used (see [3,33,46] and references therein).”
BackgroundInfluential
Research works printed but not linked: 2
- Ueda, J., and Kurita, Y. (2017). Chapter Six - Soft Wearable Robotics Technologies for Body Motion Sensing. Human Modelling for Bio-Inspired Robotics, Academic Press.
- Hayashi, 1993, Properties and Applications of Polyurethane-series Shape Memory Polymer, Int. Prog. Urethanes, 6, 90
Cited by
Micro/nano functional devices fabricated by additive manufacturing
Huang, Z., Shao, G., & Li, L. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101020 · Cited by 224
3D printing of magneto-active smart materials for advanced actuators and soft robotics applications
Khalid, M. Y., Arif, Z. U., Tariq, A., Hossain, M., Ahmed Khan, K., & Umer, R. (2024) · European Polymer Journal · doi:10.1016/j.eurpolymj.2023.112718 · Cited by 190
Auxetic mechanical metamaterials and their futuristic developments: A state-of-art review
Balan P, M., Mertens A, J., & Bahubalendruni, M. V. A. R. (2023) · Materials Today Communications · doi:10.1016/j.mtcomm.2022.105285 · Cited by 165
4D printing: Technological developments in robotics applications
Khalid, M. Y., Arif, Z. U., Ahmed, W., Umer, R., Zolfagharian, A., & Bodaghi, M. (2022) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2022.113670 · Cited by 160
Recent Advances in the Additive Manufacturing of Stimuli‐Responsive Soft Polymers
Tariq, A., Arif, Z. U., Khalid, M. Y., Hossain, M., Rasool, P. I., Umer, R., & Ramakrishna, S. (2023) · Advanced Engineering Materials · doi:10.1002/adem.202301074 · Cited by 156
Metadata
- Authors
- Scalet, G.
- Affiliations
- University of Pavia (IT)
- Corresponding author
- Scalet, Giulia
- ORCID
- Scalet, Giulia
- Venue
- Actuators
- Publisher
- MDPI AG
- Published
- 2020-02-15
- Volume
- 9
- Issue
- 1
- Pages
- 10
- ISSN
- 2076-0825 (ISSN-L)
- OpenAlex
- W3006401357
- Cited by
- 209
- References
- 312
- Citations by year
- 2026: 22 · 2025: 35 · 2024: 53 · 2023: 33 · 2022: 37 · 2021: 23 · 2020: 6
- FWCI
- 12.18
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Actuators (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
- Physical Sciences › Engineering › Biomedical Engineering › Soft Robotics and Applications
- Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Dielectric materials and actuators
- Keywords
- shape memory polymers, soft robotics, temperature-responsive materials, untethered soft robots, soft actuators, smart materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-08, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-08 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.