Two-Way and Multiple-Way Shape Memory Polymers for Soft Robotics: An Overview
Open accessThe DOI matches its Crossref record; 300 of the 312 references it cites were found in a registry or an index; 37 of the 187 sources its claims cite were checked for support.
Abstract
Two-way and multiple-way shape memory polymers offer unique opportunities to realize untethered soft robots with programmable morphology and/or properties, repeatable actuation, and advanced multi-functionalities.
Overview
CoChat Summary
TL;DR
This review surveys thermo-responsive two-way and multiple-way shape memory polymers (SMPs) for programmable soft robotics, covering materials, manufacturing, working mechanisms, applications, and modeling/simulation. It concludes that these SMPs enable reversible and sequential shape changes, but real-world soft robotic examples remain limited and key manufacturing, characterization, and modeling gaps persist.
Key findings
- Two-way SMPs under constant stress include semi-crystalline networks and liquid crystalline elastomers (LCEs); semi-crystalline networks can show reversible strain variations between 10% and 100% under moderate stresses (typically hundreds of kPa to a few MPa), while LCEs may be strained up to 400%, exert stresses between 0.01 and 0.12 MPa, have elastic moduli between 0.1 and 5 MPa, and response times greater than 10 s.
- Stress-free two-way SMPs generally achieve recoverable actuation strains between 10% and 20%; two-way shape memory composites/laminates have limited reversible strain change, generally lower than 10%.
- Multiple-way SMPs can be designed by incorporating two or more well-separated transition temperatures or a broad glass/melting transition (temperature-memory effect); some multiple-SME SMPs reach strains of about 1000% with high shape fixity and recovery.
- For comparison, one-way SMPs may be strained up to about 800% before failure, have elastic-energy densities between 10 and 2000 MJ/m³ for strains approaching 200%, exert stresses between 0.1 and 10 MPa, and have response times greater than 10 s.
Methods
- Design: narrative review/overview of thermo-responsive two-way and multiple-way SMPs and their use in programmable soft robotics.
- Data/sample: published literature and reported examples of SMP-based soft robots and actuators; no primary experimental sample or dataset is introduced.
- Main analysis: thematic synthesis of base materials, manufacturing processes (including 3D/4D printing), working mechanisms (single-material and multi-material), applications, and modeling/simulation approaches.
Limitations
- The paper states that real-world programmable soft robots based on two-way and multiple-way SMPs remain few, that standards are lacking especially for 3D printed SMPs, and that manufacturing techniques for complex components are limited.
- The paper states that constitutive models for multiple-way and two-way SMPs are still limited, especially in the three-dimensional finite strain framework and for two-way LCEs and stress-free two-way SMPs; to the author’s knowledge, no works currently model the stress-free two-way SME.
- Evident from the text: this is a narrative overview rather than a systematic review or meta-analysis, and many quantitative claims are drawn from cited studies rather than from new experiments.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
29 Valid · 10 Not valid · 59 Not checked · 52 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“the first example of 3D printed multiple-way SMPs was provided by Wu et al. [206], who fabricated layered composite structures with SMPs having different glass transition temperatures, by using a multi-material Polyjet 3D printer.”
- Also stated in: § 3. Manufacturing · plain
“Following this idea, the first example of 3D printed multiple-way SMPs was provided by Wu et al. [206], who fabricated layered composite structures with SMPs having different glass transition temperatures, by using a multi-material Polyjet 3D printer.”
What the sources say
- Partly supportedcites [206] Wu, 2016, Multi-shape active composites by 3D printing of digital shape memory polymers, Sci. Rep. sourceExperimental — accuracy not yet measured
The Abstract (page unavailable) describes Wu et al.'s 3D-printed layered composites with SMP fibers having different glass transition temperatures and a multi-shape memory effect. Results > Design concepts and Methods > Fabrication of materials (pages unavailable) identify a multi-material Objet printer. The paper does not establish that this was the first example of 3D-printed multiple-way SMPs; it also mentions earlier work on 3D-printed digital SMPs that produced sequential shape changes. (LLM, conf=0.86)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Also stated in: § 3. Manufacturing · plain
Every source the paper cites for this claim was checked and supports it.
In the paper
“Mirtschin et al. [96] studied how programming parameters such as the strain rate and temperature holding time at the deformation temperature allow one to gain precise control of the TME in semi-crystalline polyurethanes and to design the TME under stress-free recovery conditions.”
What the sources say
- Supportedcites [96] Mirtschin, 2015, Designing temperature-memory effects in semicrystalline polyurethane, RSC Adv. source
The Conclusions state that changing strain rate and holding time at the deformation temperature provided precise control over temperature-memory behavior in semicrystalline polyurethane and allowed TMEs to be designed under stress-free recovery conditions. The Results and discussion also examine both programming parameters and stress-free recovery. (LLM, conf=0.95)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Such an approach has been largely employed to achieve multiple-way SMPs with a broad glass transition [82-92] and a broad melting transition [93-95] as the switching transition.”
What the sources say
- Not checked — no full text of the sourcecites [82] Miaudet, 2007, Shape and temperature memory of nanocomposites with broadened glass transition, Science source
- Not checked — no full text of the sourcecites [83] Xie, 2010, Tunable polymer multi-shape memory effect, Nature source
- Not checked — no full text of the sourcecites [84] Xie, 2011, Strain-Based Temperature Memory Effect for Nafion and Its Molecular Origins, Adv. Funct. Mater. source
- Not checked — no full text of the sourcecites [85] Li, 2012, A Versatile Polymer Co-Network with Broadened Glass Transition Showing Adjustable Multiple Shape Memory Effect, Macromol. Chem. Phys. source
- Not checked — no full text of the sourcecites [86] Shao, 2012, Multishape memory effect of norbornene-based copolymers with cholic acid pendant groups, Macromolecules source
- Partly supportedcites [87] Ware, 2012, Triple-shape memory polymers based on self-complementary hydrogen bonding, Macromolecules sourceExperimental — accuracy not yet measured
The Introduction (page unavailable) discusses multiple-shape memory and mentions a broad-transition example. But the Conclusions describe this paper’s own triple-shape system as using a glass transition together with hydrogen-bond dissociation—not a broad glass transition as the switching transition. The paper therefore supports the general multiple-shape context, but not the claimed approach for this system. (LLM, conf=0.85)
- Not checked — no full text of the sourcecites [88] Samuel, 2014, Designing multiple-shape memory polymers with miscible polymer blends: Evidence and origins of a triple-shape memory effect for miscible PLLA/PMMA blends, Macromolecules source
- Not checked — no full text of the sourcecites [89] Wang, 2015, Biocompound-based multiple shape memory polymers reinforced by photo-cross-linking, ACS Biomater. Sci. Eng. source
- Not checked — no full text of the sourcecites [90] Zhang, 2016, Triple-shape memory effects of bismaleimide based thermosetting polymer networks prepared via heterogeneous crosslinking structures, RSC Adv. source
- Not checked — no full text of the sourcecites [91] Zheng, 2017, Catalyst-free thermoset polyurethane with permanent shape reconfigurability and highly tunable triple shape memory performance, ACS Macro Lett. source
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The sources with a verdict support this claim; the rest weren’t checked yet, have no full text we could read, or their verdicts aren’t rated yet.
In the paper
“The two-stage cross-linking method has been used to fabricate stress-free two-way SMPs, i.e., class (ii); e.g., in [136-138].”
What the sources say
- Not checked — no full text of the sourcecites [136] Wu, 2014, Two-way shape memory polymer with “switch–spring” composition by interpenetrating polymer network, J. Mater. Chem. source
- Supportedcites [137] Meng, 2015, Shape actuation via internal stress-induced crystallization of dual-cure networks, ACS Macro Lett. source
The synthesis passage describes two stages of cross-linking, and the actuator passage reports reversible elongation and contraction after removal of the applied load. Figure 1 calls the resulting devices “stressfree actuators”; here, stress-free means no external load, not an absence of internal stress. (LLM, conf=0.94)
- Not checked — no full text of the sourcecites [138] Fan, 2017, A facile approach toward scalable fabrication of reversible shape-memory polymers with bonded elastomer microphases as internal stress provider, Macromol. Rapid Commun. source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“This strategy has also allowed for the development of laminated polymers with double SMP layers exhibiting two-way SME also under stress-free condition [154-156].”
What the sources say
- Partly supportedcites [154] Kang, 2012, Two-way actuation behavior of shape memory polymer/elastomer core/shell composites, Smart Mater. Struct. sourceExperimental — accuracy not yet measured
The Conclusions report reversible two-way actuation in SMPU/SBS core/shell composites, and the schematic in §2.1 labels heating and cooling as occurring at zero external stress. But §2.2 describes one SMPU film coated with an SBS elastomer, not a laminate with double SMP layers. The Introduction’s laminate example likewise pairs an SMP film with an elastomeric film. (LLM, conf=0.88)
- Not checked — no full text of the sourcecites [155] Imai, 2013, An actuator of two-way behavior by using two kinds of shape memory polymers with different Tgs, Precis. Eng. source
- Partly supportedcites [156] Taya, 2013, Design of two-way reversible bending actuator based on a shape memory alloy/shape memory polymer composite, Smart Mater. Struct. sourceExperimental — accuracy not yet measured
Section 3 (page unavailable) models a three-layer laminate with two outer SMP layers, and the Conclusion (page unavailable) reports repeatable two-way bending. The active center layer contains SMA wires, however, so the paper does not establish two-way shape memory in a polymer-only laminate. The cited passages also do not establish the claimed stress-free condition. (LLM, conf=0.82)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
58 more claims · 12 with their cited sources checked
Create a free account to see all 150 claims and every source verdict.
- It may state two separate claims as one. 48
- Probably not a substantial claim. 48
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ 2.3. Two-Way SMPs
“such that Tm ,1 > Tm ,2 .”
§ 2.3. Two-Way SMPs
“(v) heating the material up to Tm ,2 > T 3 > Tm ,1 under stress-free conditions.”
Citations
Cites
Williams, M. L., Landel, R. F., & Ferry, J. D. (1955) · Journal of the American Chemical Society · doi:10.1021/ja01619a008 · Cited by 8,083
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027 · cited 2×
“, origami, kirigami) [22,23], bio-inspired and bio-mimetics architectures [19,24,25], reinforced systems [26], and granular jamming [27].”
BackgroundAnalysis of Bi-Metal Thermostats
Timoshenko, S. (1925) · Journal of the Optical Society of America · doi:10.1364/josa.11.000233 · Cited by 2,426
An integrated design and fabrication strategy for entirely soft, autonomous robots
Wehner, M., Truby, R. L., Fitzgerald, D. J., Mosadegh, B., Whitesides, G. M., Lewis, J. A., & Wood, R. J. (2016) · Nature · doi:10.1038/nature19100 · Cited by 2,127
Programmable and adaptive mechanics with liquid crystal polymer networks and elastomers
White, T. J., & Broer, D. J. (2015) · Nature Materials · doi:10.1038/nmat4433 · Cited by 1,744
Soft robotics: Technologies and systems pushing the boundaries of robot abilities
Laschi, C., Mazzolai, B., & Cianchetti, M. (2016) · Science Robotics · doi:10.1126/scirobotics.aah3690 · Cited by 1,570 · cited 1×
“In fact, robots based on soft materials (widely known as soft robots) are able to withstand large deformations, perform complex motions, conform to arbitrary geometries, and sustain impacts without damage, and thus they are particularly suited to those applications where a safe interaction with people, fragile objects…”
BackgroundShape-memory polymers and their composites: stimulus methods and applications
Leng, J., Lan, X., Liu, Y., & Du, S. (2011) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.03.001 · Cited by 1,495
Biomedical applications of soft robotics
Cianchetti, M., Laschi, C., Menciassi, A., & Dario, P. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0022-y · Cited by 1,435
Tunable polymer multi-shape memory effect
Xie, T. (2010) · Nature · doi:10.1038/nature08863 · Cited by 1,380
Soft Actuators for Small-Scale Robotics
Hines, L., Petersen, K., Lum, G. Z., & Sitti, M. (2017) · Advanced Materials · doi:10.1002/adma.201603483 · Cited by 1,337 · cited 6×
“Finally, it is worth mentioning that thermally-induced SMPs may be directly triggered by heating with hot gas or water, but indirect heating has been also used (see [3,33,46] and references therein).”
BackgroundInfluential
Research works printed but not linked: 2
- Ueda, J., and Kurita, Y. (2017). Chapter Six - Soft Wearable Robotics Technologies for Body Motion Sensing. Human Modelling for Bio-Inspired Robotics, Academic Press.
- Hayashi, 1993, Properties and Applications of Polyurethane-series Shape Memory Polymer, Int. Prog. Urethanes, 6, 90
Cited by
Micro/nano functional devices fabricated by additive manufacturing
Huang, Z., Shao, G., & Li, L. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101020 · Cited by 224
3D printing of magneto-active smart materials for advanced actuators and soft robotics applications
Khalid, M. Y., Arif, Z. U., Tariq, A., Hossain, M., Ahmed Khan, K., & Umer, R. (2024) · European Polymer Journal · doi:10.1016/j.eurpolymj.2023.112718 · Cited by 190
Auxetic mechanical metamaterials and their futuristic developments: A state-of-art review
Balan P, M., Mertens A, J., & Bahubalendruni, M. V. A. R. (2023) · Materials Today Communications · doi:10.1016/j.mtcomm.2022.105285 · Cited by 165
4D printing: Technological developments in robotics applications
Khalid, M. Y., Arif, Z. U., Ahmed, W., Umer, R., Zolfagharian, A., & Bodaghi, M. (2022) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2022.113670 · Cited by 160
Recent Advances in the Additive Manufacturing of Stimuli‐Responsive Soft Polymers
Tariq, A., Arif, Z. U., Khalid, M. Y., Hossain, M., Rasool, P. I., Umer, R., & Ramakrishna, S. (2023) · Advanced Engineering Materials · doi:10.1002/adem.202301074 · Cited by 157
3D printing of stimuli-responsive hydrogel materials: Literature review and emerging applications
Arif, Z. U., Khalid, M. Y., Tariq, A., Hossain, M., & Umer, R. (2023) · Giant · doi:10.1016/j.giant.2023.100209 · Cited by 146
“It can print customized and intricate designs such as complex lattice structures, which cannot be manufactured using conventional manufacturing processes [161–164] , as illustrated in Fig.”
The status, barriers, challenges, and future in design for 4D printing
Demoly, F., Dunn, M. L., Wood, K. L., Qi, H. J., & André, J. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.110193 · Cited by 141
Stimuli-responsive engineered living materials
Rivera‐Tarazona, L. K., Campbell, Z. T., & Ware, T. H. (2020) · Soft Matter · doi:10.1039/d0sm01905d · Cited by 139
3D/4D printing of cellulose nanocrystals-based biomaterials: Additives for sustainable applications
Khalid, M. Y., Arif, Z. U., Noroozi, R., Hossain, M., Ramakrishna, S., & Umer, R. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.126287 · Cited by 140
“Furthermore, this technology offers various advantages over traditional manufacturing routes, such as unrestricted and complex design, faster production, low manufacturing cost and waste, and the one-step manufacturing process which include multiple materials combined into a single object [25 – 27].”
Bodaghi, M., Wang, L., Zhang, F., Liu, Y., Leng, J., Xing, R., Dickey, M. D., Vanaei, S., Elahinia, M., Hoa, S. V., et al. (2024) · Smart Materials and Structures · doi:10.1088/1361-665x/ad5c22 · Cited by 143
Persano, L., Camposeo, A., Matino, F., Wang, R., Thiyagarajan, N., Li, Q., Pan, M., Su, Y., Kar‐Narayan, S., Auricchio, F., et al. (2024) · Advanced Materials · doi:10.1002/adma.202405363 · Cited by 124
Self-citationChen, Y., Zhao, X., Yan, L., Jin, Z.-Y., Yang, Y., Yang, M., & Yin, B. (2021) · Journal of Materials Chemistry C · doi:10.1039/d1tc00468a · Cited by 117
Li, J., Zhang, Y., Shang, R., Cheng, C., Cheng, Y. F., Xing, J., Wei, Z., & Zhao, Y. J. (2021) · Energy storage materials · doi:10.1016/j.ensm.2021.08.046 · Cited by 99
Kim, D. S., Lee, Y., Kim, Y. B., Wang, Y., & Yang, S. M. (2023) · Science Advances · doi:10.1126/sciadv.adh5107 · Cited by 98
“…to achieve fast, agile, and autonomous locomotion ( 8 – 14 ) using elastomeric materials, including silicone ( 14 , 15 ), hydrogels ( 16 , 17 ), soft composites ( 18 , 19 ), shape memory polymers ( 20 , 21 ), liquid crystal elastomers (LCEs) ( 9 , 22 – 25 ), and dielectric elastomers ( 26 , 27 ).”
New Trends in 4D Printing: A Critical Review
Vatanparast, S., Boschetto, A., Bottini, L., & Gaudenzi, P. (2023) · Applied Sciences · doi:10.3390/app13137744 · Cited by 89
“…have been explored 4DP, including Fused Filament Fabrication (FFF) or Fused Deposition Modeling [25,110], Electro Hydro Dynamic printing [111], DIW, Material Jetting, Selective Laser Sintering, Stereolithography (SLA), Digital Light Processing (DLP), Multiphoton Lithography, and SLM [112,113].”
Bioinspired electronics for intelligent soft robots
Bang, J., Choi, S. H., Pyun, K. R., Jung, Y., Hong, S., Kim, D., Lee, Y., Won, D., Jeong, S., Shin, W., et al. (2024) · Nature Reviews Electrical Engineering · doi:10.1038/s44287-024-00081-2 · Cited by 96
“Generally, shape-memory polymers achieve this functionality through temperature-induced changes in crystallinity 114 .”
Clinical translation of wireless soft robotic medical devices
Wang, T., Wu, Y., Yıldız, E., Kanyas, S., & Sitti, M. (2024) · Nature Reviews Bioengineering · doi:10.1038/s44222-024-00156-7 · Cited by 102
“Temperature variations can trigger shape changes but require precise control and compatibility with the clinical setting 6,72 .”
Actuating Shape Memory Polymer for Thermoresponsive Soft Robotic Gripper and Programmable Materials
Schönfeld, D., Chalissery, D., Wenz, F., Specht, M., Eberl, C., & Pretsch, T. (2021) · Molecules · doi:10.3390/molecules26030522 · Cited by 83
Staszczak, M., Kalat, M. N., Golasiński, K. M., Urbański, L., Takeda, K., Matsui, R., & Pieczyska, E. A. (2022) · Polymers · doi:10.3390/polym14214775 · Cited by 83
Orozco, F., Salvatore, A., Sakulmankongsuk, A., et al. (2022) · Polymer · doi:10.1016/j.polymer.2022.125365 · Cited by 69
Akbar, I., Elhadrouz, M., Mansori, M. E., & Lagoudas, D. C. (2022) · European Polymer Journal · doi:10.1016/j.eurpolymj.2022.111106 · Cited by 68
4D printed shape memory sandwich structures: experimental analysis and numerical modeling
Serjouei, A., Yousefi, A., Jenaki, A., Bodaghi, M., & Mehrpouya, M. (2022) · Smart Materials and Structures · doi:10.1088/1361-665x/ac60b5 · Cited by 66
Folding and Bending Planar Coils for Highly Precise Soft Angle Sensing
Wang, H., Totaro, M., Veerapandian, S., Ilyas, M., Kong, M., Jeong, U., & Beccai, L. (2020) · Advanced Materials Technologies · doi:10.1002/admt.202000659 · Cited by 64
Hassan, H., Hallez, H., Thielemans, W., & Vandeginste, V. (2024) · European Polymer Journal · doi:10.1016/j.eurpolymj.2024.112861 · Cited by 69
Chen, Z., Lin, Y., Zheng, G., Yang, Y., Zhang, Y., Zheng, S., Li, J., Li, J., Ren, L., & Jiang, L. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c15406 · Cited by 60
Bisht, N., Vishwakarma, J., Jaiswal, S., Kumar, P., Srivastava, A. K., Dhand, C., & Dwivedi, N. (2024) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-024-01059-2 · Cited by 68
“A multi-way SMP refers to a polymer that is capable of “memorizing” more than one temporary shape and subsequently recovering in a highly controllable, reversible manner [49–51].”
Bio‐Inspired Semi‐Active Safeguarding Design with Enhanced Impact Resistance via Shape Memory Effect
Wang, W., Wang, S., Zhou, J., Deng, H., Sun, S., Xue, T., Ma, Y., & Gong, X. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202212093 · Cited by 69
4D fabrication of shape-changing systems for tissue engineering: state of the art and perspectives
Bonetti, L., & Scalet, G. (2024) · Progress in Additive Manufacturing · doi:10.1007/s40964-024-00743-5 · Cited by 63
“The reader is referred to [54, 144, 145] for further details.”
InfluentialSelf-citationFrom Drug Molecules to Thermoset Shape Memory Polymers: A Machine Learning Approach
Yan, C., Feng, X., & Li, G. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c20947 · Cited by 52
Applications of four-dimensional printing in emerging directions: Review and prospects
Huang, J., Xia, S., Li, Z., Wu, X., & Ren, J. (2021) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2021.02.040 · Cited by 51
Inverardi, N., Toselli, M., Scalet, G., Messori, M., Auricchio, F., & Pandini, S. (2022) · Macromolecules · doi:10.1021/acs.macromol.2c01064 · Cited by 51
Self-citationThe Emerging 4D Printing of Shape‐Memory Thermomorphs for Self‐Adaptative Biomedical Implants
Ding, A., Tang, F., & Alsberg, E. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202418348 · Cited by 62
Electroactive Self-Healing Shape Memory Polymer Composites Based on Diels–Alder Chemistry
Orozco, F., Kaveh, M., Santosa, D. S., Lima, G. M. R., Gomes, D. R., Pei, Y. T., Araya‐Hermosilla, R., Moreno‐Villoslada, I., Picchioni, F., & Bose, R. K. (2021) · ACS Applied Polymer Materials · doi:10.1021/acsapm.1c00999 · Cited by 52
Xu, X., Wang, Z., Li, M., Su, Y., Zhang, Q., Zhang, S., & Hu, J. (2023) · Advanced Materials · doi:10.1002/adma.202304725 · Cited by 48
Bisht, N., Jaiswal, S., Vishwakarma, J., Gupta, S. K., Yeo, R. J., Sankaranarayanan, S. K. R. S., Dhand, C., & Dwivedi, N. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.155154 · Cited by 51
Shape memory polymer/graphene nanocomposites: State-of-the-art
Kausar, A. (2022) · e-Polymers · doi:10.1515/epoly-2022-0024 · Cited by 51
Decroly, G., Toncheva, A., Blanc, L., Raquez, J., Lessinnes, T., Delchambre, A., & Lambert, P. (2020) · Actuators · doi:10.3390/act9040131 · Cited by 50
Lee, J., & Kang, S. (2021) · Micromachines · doi:10.3390/mi12070757 · Cited by 44
4D printing: Historical evolution, computational insights and emerging applications
Manshor, M. R., Alli, Y. A., Anuar, H., Ejeromedoghene, O., Omotola, E. O., & Suhr, J. (2023) · Materials Science and Engineering B · doi:10.1016/j.mseb.2023.116567 · Cited by 44
A computational design approach for multi-material 4D printing based on interlocking blocks assembly
Benyahia, K., Seriket, H., Prod’hon, R., Gomes, S., André, J., Qi, H. J., & Demoly, F. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.102993 · Cited by 37
4D printed biocompatible magnetic nanocomposites toward deployable constructs
Choudhury, S., Joshi, A., Dasgupta, D., Ghosh, A., Asthana, S., & Chatterjee, K. (2024) · Materials Advances · doi:10.1039/d3ma00958k · Cited by 38
Choudhury, S., Joshi, A., Baghel, V. S., Ananthasuresh, G. K., Asthana, S., Homer‐Vanniasinkam, S., & Chatterjee, K. (2024) · Journal of Materials Chemistry B · doi:10.1039/d4tb00437j · Cited by 37
System‐Engineered Miniaturized Robots: From Structure to Intelligence
Bandari, V. K., & Schmidt, O. G. (2021) · Advanced Intelligent Systems · doi:10.1002/aisy.202000284 · Cited by 39
Perera, O., Liyanapathirana, R., Gargiulo, G. D., & Gunawardana, U. (2024) · Actuators · doi:10.3390/act13120524 · Cited by 46
Styrene‐butadiene‐styrene ‐based shape memory polymers: Evolution and the current state of art
Basak, S., & Bandyopadhyay, A. (2022) · Polymers for Advanced Technologies · doi:10.1002/pat.5682 · Cited by 34
4D Printing of MXene Composites for Deployable Actuating Structures
McLellan, K., Li, T., Sun, Y.-C., Jakubinek, M. B., & Naguib, H. E. (2022) · ACS Applied Polymer Materials · doi:10.1021/acsapm.2c01192 · Cited by 34
Review of Thermoresponsive Electroactive and Magnetoactive Shape Memory Polymer Nanocomposites
Sánchez, C. P., Jérôme, C., Noels, L., & Vanderbemden, P. (2022) · ACS Omega · doi:10.1021/acsomega.2c05930 · Cited by 37
“As was already mentioned, conventional triple (or multiple) SMPs and SMCs are based on the 1W-SM effect, 63 thus making the shape memory effect an irreversible feature requiring the application of the programming processes for further shape change.”
Toward Autonomous Self‐Healing in Soft Robotics: A Review and Perspective for Future Research
Tabrizian, S. K., Terryn, S., & Vanderborght, B. (2025) · Advanced Intelligent Systems · doi:10.1002/aisy.202400790 · Cited by 43
4D Printing of Single-Network Shape Memory Polyurethanes with Two-Way Actuation Properties
Jiang, Y., Leng, Q. Y., Yan, Y., Ng, E. L. L., Chee, H. L., Wang, F., Chan, S. Y., Loh, X. J., Wang, J., & Chan, B. Q. Y. (2022) · ACS Applied Polymer Materials · doi:10.1021/acsapm.2c01491 · Cited by 31
Guo, Q., Wei, J., Yu, S., Feng, X., Gao, Z., Wang, R., Yu, H., Ge, Z., & Yang, W. (2025) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2025.137351 · Cited by 31
Idumah, C. I. (2023) · Polymer Engineering and Science · doi:10.1002/pen.26331 · Cited by 29
Triple-Shape-Memory Soft Actuators from an Interpenetrating Network of Hybrid Liquid Crystals
Hoekstra, D. C., Debije, M. G., & Schenning, A. P. H. J. (2021) · Macromolecules · doi:10.1021/acs.macromol.1c00611 · Cited by 28
4D printing of semi-crystalline crosslinked polymer networks with two-way shape-memory effect
Bonetti, L., Natali, D., Pandini, S., Messori, M., Toselli, M., & Scalet, G. (2024) · Materials & Design · doi:10.1016/j.matdes.2024.112725 · Cited by 29
Self-citationBiorobotics: An Overview of Recent Innovations in Artificial Muscles
Craddock, M., Augustine, E., Konerman, S., & Shin, M. (2022) · Actuators · doi:10.3390/act11060168 · Cited by 29
Booth, R. E., Khanna, C., Schrickx, H. M., Siddika, S., Shafe, A. A., & O’Connor, B. T. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c10290 · Cited by 30
Programmable materials: Current trends, challenges, and perspectives
Scalet, G. (2024) · Applied Materials Today · doi:10.1016/j.apmt.2024.102372 · Cited by 35
Self-citationAssisted damage closure and healing in soft robots by shape memory alloy wires
Tabrizian, S. K., Terryn, S., Cornellà, A. C., Brancart, J., Legrand, J., Assche, G. V., & Vanderborght, B. (2023) · Scientific Reports · doi:10.1038/s41598-023-35943-6 · Cited by 30
A review of superhydrophobic shape-memory polymers: Preparation, activation, and applications
Wan, T., Wang, B., Han, Q., Chen, J., Li, B., & Wei, S. (2022) · Applied Materials Today · doi:10.1016/j.apmt.2022.101665 · Cited by 27
Jarrah, H. R., Zolfagharian, A., Hedayati, R., Serjouei, A., & Bodaghi, M. (2021) · Actuators · doi:10.3390/act10030046 · Cited by 28
“Applications of two-way and multipleway SMPs in soft robotics had been reviewed by Scalet [5].”
InfluentialShape Memory Polymer Foam with Programmable Apertures
Walter, M., Friess, F., Krus, M., Zolanvari, S. M. H., Grün, G., Kröber, H., & Pretsch, T. (2020) · Polymers · doi:10.3390/polym12091914 · Cited by 24
Du, W., Zhang, Z., Yin, C., Ge, X., & Shi, L. (2021) · Polymers for Advanced Technologies · doi:10.1002/pat.5464 · Cited by 22
Hamidi, M. N., Abdullah, J., Shuib, R. K., Aziz, I., & Namazi, H. (2024) · Engineering Research Express · doi:10.1088/2631-8695/ad337e · Cited by 27
Chi, D., Gu, H., Wang, J., Wu, C., Wang, R., Cheng, Z., Zhang, D., Xie, Z., & Liu, Y. (2023) · Materials Horizons · doi:10.1039/d3mh00270e · Cited by 25
Srinivas, P. V. V., Jacob, L., Muhammed Shebeeb, C., Butt, H., Barsoum, I., Al‐Rub, R. K. A., & Zaki, W. (2024) · Advanced Engineering Materials · doi:10.1002/adem.202301698 · Cited by 23
Electro-induced two-way shape memory thermoplastic polyamide elastomer/carbon nanotubes composites
Lu, Y., Wu, Y., Wu, J., Yang, P., Zhang, Y., Zhao, W. D., Zhang, X., Cui, Z., Fu, P., Pang, X., et al. (2024) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2024.01.258 · Cited by 20
4D printing of shape memory composites with remotely controllable local deformation
Ren, L., Wang, Z., Ren, L., Liu, Q., Li, W., Song, Z., Li, B., Wu, Q., & Zhou, X. (2023) · Materials Today Chemistry · doi:10.1016/j.mtchem.2023.101470 · Cited by 21
Two‐Way Semicrystalline Shape Memory Elastomers: Development and Current Research Trends
Basak, S., & Bandyopadhyay, A. (2022) · Advanced Engineering Materials · doi:10.1002/adem.202200257 · Cited by 25
A review on self-healing featured soft robotics
Islam, M. A., Talukder, L., Al, M. F., Sarker, S. K., Muyeen, S. M., Das, P., Hasan, M. M., Das, S. K., Islam, M. M., Islam, M. R., et al. (2023) · Frontiers in Robotics and AI · doi:10.3389/frobt.2023.1202584 · Cited by 31
“Additive printing technology, which can handle soft and graded materials, is one example of a new manufacturing technique that dramatically increases design flexibility (Scalet, 2020).”
BackgroundStaszczak, M., Urbański, L., Cristea, M., Ionita, D. G., & Pieczyska, E. A. (2024) · Polymers · doi:10.3390/polym16020219 · Cited by 24
Joseph, T. M., Thomas, M. G., Mahapatra, D. K., Unni, A. B., Kianfar, E., Haponiuk, J. T., & Thomas, S. (2025) · Case Studies in Chemical and Environmental Engineering · doi:10.1016/j.cscee.2025.101165 · Cited by 27
Lai, S., Jiang, S.-Y. F., Chou, H.-C., Lin, T.-Y., Wei, Y.-E., & Yu, B. (2021) · Polymer Testing · doi:10.1016/j.polymertesting.2021.107333 · Cited by 19
4D Printing of Thermally Activated Self-Healing Shape Memory Polyurethanes
Jiang, Y., Ng, E. L. L., Han, D. X., Yu, X., Wang, J., Chan, S. Y., & Chan, B. Q. Y. (2024) · ACS Applied Polymer Materials · doi:10.1021/acsapm.4c01358 · Cited by 21
Wu, Y., Wei, F., Li, T., Li, M., Pei, D., & Li, C. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.151455 · Cited by 17
Zhao, Y., Peng, K., Xi, J., Shahab, S., & Mirzaeifar, R. (2021) · Smart Materials and Structures · doi:10.1088/1361-665x/ac3c02 · Cited by 18
A DIY Fabrication Approach of Stretchable Sensors Using Carbon Nano Tube Powder for Wearable Device
Wiranata, A., Ohsugi, Y., Minaminosono, A., Mao, Z., Kurata, H., Hosoya, N., & Maeda, S. (2021) · Frontiers in Robotics and AI · doi:10.3389/frobt.2021.773056 · Cited by 17
“…al., 2021; Takagi et al., 2021; Wiranata et al., 2021; Zhao et al., 2021) a shape memory polymer (Besse et al., 2017; Li et al., 2020; Miao et al., 2020; Scalet, 2020; Zeng et al., 2020), and gel actuators (Maeda et al., 2007, 2010; Hwang et al., 2019; Mao et al., 2020a, 2020b; Zhang et al., 2020).”
BackgroundHoed, F. M. D., Carlotti, M., Palagi, S., Raffa, P., & Mattoli, V. (2024) · Micromachines · doi:10.3390/mi15020275 · Cited by 20
“…(SMPs) have similar properties but show, for the applications discussed here, many advantages despite being capable of smaller forces (1 MPa): [139] (i) they can transition through several shapes (making them appealing for time-asymmetric motions); [63] (ii) the transition temperatures are…”
BackgroundDefects, monitoring, and AI-enabled control in soft material additive manufacturing: a review
Yu, K., Yao, Y., We, Z., Lu, L., Gao, Q., Zhang, P., & Sing, S. L. (2025) · Virtual and Physical Prototyping · doi:10.1080/17452759.2025.2588456 · Cited by 34
“Second, repeated recovery – fixation cycles may induce fatigue and reduce shape memory efficiency due to microcrack propagation and incomplete recovery [105,106].”
Chitosan Biofilm Actuators: Humidity Responsive Materials for Sustainable Interaction Design
Teuling, K. D., Winters, A., & Bruns, M. (2024) · doi:10.1145/3623509.3635262 · Cited by 16
“…[18] but projects have concentrated on fabrication rather than interactivity [4, 12], or visual aesthetics [9], while sustainable approaches are also needed for novel materials, fabrication techniques, and design methods for sensing and physical actuation in materials, e.g., soft robotics [11, 24].”
BackgroundFused Filament Fabrication of Actuating Objects
Chalissery, D., Schönfeld, D., Walter, M., Ziervogel, F., & Pretsch, T. (2022) · Macromolecular Materials and Engineering · doi:10.1002/mame.202200214 · Cited by 17
Arricca, M., Inverardi, N., Pandini, S., Toselli, M., Messori, M., & Scalet, G. (2024) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2024.105955 · Cited by 16
Self-citationNoh, Y., Son, E., & Cha, C. (2023) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2023.1284226 · Cited by 16
“SMPs are the most widely explored class of programmable materials Ratna and Karger-Kocsis, (2008); Scalet, (2020); Xia et al. (2021).”
BackgroundRegulated photo/thermal dual and programmable staged responsive shape memory poly(aryl ether ketone)
Yang, S., He, Y., & Leng, J. (2023) · Journal of Applied Polymer Science · doi:10.1002/app.54444 · Cited by 15
4D printing of bilayer structures with programmable shape-shifting behavior
Zhang, J., Ji, D., Yang, X., Zhou, X., & Yin, Z. (2022) · Journal of Materials Science · doi:10.1007/s10853-022-07981-4 · Cited by 16
A Hybrid Syntactic Foam-Based Open-Cell Foam with Reversible Actuation
Sarrafan, S., & Li, G. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c16168 · Cited by 16
Xu, L., Li, Z., Lu, H., Qi, X., Dong, Y., Dai, H., Islam, M. Z., Fu, Y., & Ni, Q. (2021) · Advanced Materials Technologies · doi:10.1002/admt.202101229 · Cited by 16
One Leader of Smart Materials: Two‐Way Shape Memory Polymers
Zou, J., Wang, Y., Cheng, J., Cai, W., Li, J., Li, X., Fan, W., & Liu, R. (2025) · Journal of Applied Polymer Science · doi:10.1002/app.57246 · Cited by 18
Zhang, X., Tang, W., Yang, D. S., Ma, J., Li, X., & Tian, G. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.166372 · Cited by 19
A thermo-mechanical constitutive model for triple-shape and two-way shape memory polymers
Gu, J., Wang, C., Zeng, H., Duan, H., Wan, M., & Sun, H. (2024) · Smart Materials and Structures · doi:10.1088/1361-665x/ad4cc2 · Cited by 16
“It is clear that two-way SMPs have great potential for the development of untethered robotic systems with programmable and reversible responses [17].”
Programmable polymers with shape memory for biomedical applications
Wang, K., Man, L., Zhang, M., Jia, Y., & Zhu, X. X. (2023) · Programmable Materials · doi:10.1017/pma.2023.2 · Cited by 15
“…procedures of thermally induced dual SMPs are concisely presented here for a better understanding of the shape changes, while some descriptions can also be found in several review papers (Lendlein and Kelch, 2002; Xie, 2011; Zhao et al., 2015; Wang et al., 2019; Delaey et al., 2020; Scalet, 2020).”
PVA/PEG/graphene shape memory composites responsive to multi-stimuli
Falqi, F. H., Bin‐Dahman, O. A., Khair, A., & Al-Harthi, M. A. (2022) · Applied Physics A · doi:10.1007/s00339-022-05484-2 · Cited by 13
Wang, W., Liu, S., Zhou, J., Li, Z., Zhang, J., Mei, G., Yang, J., Wang, S., Hu, Y. Z., & Gong, X. (2025) · Composites Part B Engineering · doi:10.1016/j.compositesb.2025.112291 · Cited by 17
Bistable Mechanisms 3D Printing for Mechanically Programmable Vibration Control
Zolfagharian, A., Demoly, F., Lakhi, M., Rolfe, B., & Bodaghi, M. (2025) · Advanced Engineering Materials · doi:10.1002/adem.202402233 · Cited by 12
Peng, W., Mu, H., Liang, X. Z., Zhang, X., Zhao, Q., & Xie, T. (2023) · ACS Macro Letters · doi:10.1021/acsmacrolett.3c00638 · Cited by 12
Stepless shape morphing polymer
Min, L., Zhu, M., Lu, H., Li, Y., Fan, L. F., Zhang, M., & Minzhi, R. (2022) · SmartMat · doi:10.1002/smm2.1134 · Cited by 13
Xi, J., Shahab, S., & Mirzaeifar, R. (2022) · RSC Advances · doi:10.1039/d2ra05019f · Cited by 13
Tian, J., Xie, J., Shi, J., Gu, J., Sun, H., & Zeng, H. (2025) · International Journal of Smart and Nano Materials · doi:10.1080/19475411.2025.2540296 · Cited by 11
Multi-material 4D printing to realize two-phase morphing in self-actuating structures
Lee, H. M., Han, S. J., Kim, M., & Yoon, G. H. (2024) · Smart Materials and Structures · doi:10.1088/1361-665x/ad21b5 · Cited by 12
“Studies have been done on achieving sequential deformations using single materials with wide range of shape memory transition temperature ranges [51, 52] and considering multi-material approaches for self-folding [53].”
Advances in Graphene‐Reinforced Polyurethane Nanocomposites: An Advanced Shape Memory Material
Pathak, R., Punetha, V. D., Bhatt, S., & Punetha, M. (2023) · ChemistrySelect · doi:10.1002/slct.202303261 · Cited by 14
Dual Stimuli-Responsive Orthodontic Aligners: An In Vitro Study
Schönfeld, D., Koss, S., Vohl, N., Friess, F., Drescher, D., & Pretsch, T. (2023) · Materials · doi:10.3390/ma16083094 · Cited by 14
Kausar, A. (2024) · Advances in Materials Science · doi:10.2478/adms-2024-0016 · Cited by 11
Metadata
- Authors
- Scalet, G.
- Affiliations
- University of Pavia (IT)
- Corresponding author
- Scalet, Giulia
- ORCID
- Scalet, Giulia
- Venue
- Actuators
- Publisher
- MDPI AG
- Published
- 2020-02-15
- Volume
- 9
- Issue
- 1
- Pages
- 10
- ISSN
- 2076-0825 (ISSN-L)
- OpenAlex
- W3006401357
- Cited by
- 209
- References
- 312
- Citations by year
- 2026: 22 · 2025: 35 · 2024: 53 · 2023: 33 · 2022: 37 · 2021: 23 · 2020: 6
- FWCI
- 12.18
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Actuators (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
- Physical Sciences › Engineering › Biomedical Engineering › Soft Robotics and Applications
- Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Dielectric materials and actuators
- Keywords
- shape memory polymers, soft robotics, temperature-responsive materials, untethered soft robots, soft actuators, smart materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-08, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-08 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.