Two-Way and Multiple-Way Shape Memory Polymers for Soft Robotics: An Overview
Open accessThe DOI matches its Crossref record; 300 of the 312 references it cites were found in a registry or an index; 37 of the 187 sources its claims cite were checked for support.
Abstract
Two-way and multiple-way shape memory polymers offer unique opportunities to realize untethered soft robots with programmable morphology and/or properties, repeatable actuation, and advanced multi-functionalities.
Overview
CoChat Summary
TL;DR
This review surveys thermo-responsive two-way and multiple-way shape memory polymers (SMPs) for programmable soft robotics, covering materials, manufacturing, working mechanisms, applications, and modeling/simulation. It concludes that these SMPs enable reversible and sequential shape changes, but real-world soft robotic examples remain limited and key manufacturing, characterization, and modeling gaps persist.
Key findings
- Two-way SMPs under constant stress include semi-crystalline networks and liquid crystalline elastomers (LCEs); semi-crystalline networks can show reversible strain variations between 10% and 100% under moderate stresses (typically hundreds of kPa to a few MPa), while LCEs may be strained up to 400%, exert stresses between 0.01 and 0.12 MPa, have elastic moduli between 0.1 and 5 MPa, and response times greater than 10 s.
- Stress-free two-way SMPs generally achieve recoverable actuation strains between 10% and 20%; two-way shape memory composites/laminates have limited reversible strain change, generally lower than 10%.
- Multiple-way SMPs can be designed by incorporating two or more well-separated transition temperatures or a broad glass/melting transition (temperature-memory effect); some multiple-SME SMPs reach strains of about 1000% with high shape fixity and recovery.
- For comparison, one-way SMPs may be strained up to about 800% before failure, have elastic-energy densities between 10 and 2000 MJ/m³ for strains approaching 200%, exert stresses between 0.1 and 10 MPa, and have response times greater than 10 s.
Methods
- Design: narrative review/overview of thermo-responsive two-way and multiple-way SMPs and their use in programmable soft robotics.
- Data/sample: published literature and reported examples of SMP-based soft robots and actuators; no primary experimental sample or dataset is introduced.
- Main analysis: thematic synthesis of base materials, manufacturing processes (including 3D/4D printing), working mechanisms (single-material and multi-material), applications, and modeling/simulation approaches.
Limitations
- The paper states that real-world programmable soft robots based on two-way and multiple-way SMPs remain few, that standards are lacking especially for 3D printed SMPs, and that manufacturing techniques for complex components are limited.
- The paper states that constitutive models for multiple-way and two-way SMPs are still limited, especially in the three-dimensional finite strain framework and for two-way LCEs and stress-free two-way SMPs; to the author’s knowledge, no works currently model the stress-free two-way SME.
- Evident from the text: this is a narrative overview rather than a systematic review or meta-analysis, and many quantitative claims are drawn from cited studies rather than from new experiments.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
29 Valid · 10 Not valid · 59 Not checked · 52 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“the first example of 3D printed multiple-way SMPs was provided by Wu et al. [206], who fabricated layered composite structures with SMPs having different glass transition temperatures, by using a multi-material Polyjet 3D printer.”
- Also stated in: § 3. Manufacturing · plain
“Following this idea, the first example of 3D printed multiple-way SMPs was provided by Wu et al. [206], who fabricated layered composite structures with SMPs having different glass transition temperatures, by using a multi-material Polyjet 3D printer.”
What the sources say
- Partly supportedcites [206] Wu, 2016, Multi-shape active composites by 3D printing of digital shape memory polymers, Sci. Rep. sourceExperimental — accuracy not yet measured
The Abstract (page unavailable) describes Wu et al.'s 3D-printed layered composites with SMP fibers having different glass transition temperatures and a multi-shape memory effect. Results > Design concepts and Methods > Fabrication of materials (pages unavailable) identify a multi-material Objet printer. The paper does not establish that this was the first example of 3D-printed multiple-way SMPs; it also mentions earlier work on 3D-printed digital SMPs that produced sequential shape changes. (LLM, conf=0.86)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Also stated in: § 3. Manufacturing · plain
Every source the paper cites for this claim was checked and supports it.
In the paper
“Mirtschin et al. [96] studied how programming parameters such as the strain rate and temperature holding time at the deformation temperature allow one to gain precise control of the TME in semi-crystalline polyurethanes and to design the TME under stress-free recovery conditions.”
What the sources say
- Supportedcites [96] Mirtschin, 2015, Designing temperature-memory effects in semicrystalline polyurethane, RSC Adv. source
The Conclusions state that changing strain rate and holding time at the deformation temperature provided precise control over temperature-memory behavior in semicrystalline polyurethane and allowed TMEs to be designed under stress-free recovery conditions. The Results and discussion also examine both programming parameters and stress-free recovery. (LLM, conf=0.95)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Such an approach has been largely employed to achieve multiple-way SMPs with a broad glass transition [82-92] and a broad melting transition [93-95] as the switching transition.”
What the sources say
- Not checked — no full text of the sourcecites [82] Miaudet, 2007, Shape and temperature memory of nanocomposites with broadened glass transition, Science source
- Not checked — no full text of the sourcecites [83] Xie, 2010, Tunable polymer multi-shape memory effect, Nature source
- Not checked — no full text of the sourcecites [84] Xie, 2011, Strain-Based Temperature Memory Effect for Nafion and Its Molecular Origins, Adv. Funct. Mater. source
- Not checked — no full text of the sourcecites [85] Li, 2012, A Versatile Polymer Co-Network with Broadened Glass Transition Showing Adjustable Multiple Shape Memory Effect, Macromol. Chem. Phys. source
- Not checked — no full text of the sourcecites [86] Shao, 2012, Multishape memory effect of norbornene-based copolymers with cholic acid pendant groups, Macromolecules source
- Partly supportedcites [87] Ware, 2012, Triple-shape memory polymers based on self-complementary hydrogen bonding, Macromolecules sourceExperimental — accuracy not yet measured
The Introduction (page unavailable) discusses multiple-shape memory and mentions a broad-transition example. But the Conclusions describe this paper’s own triple-shape system as using a glass transition together with hydrogen-bond dissociation—not a broad glass transition as the switching transition. The paper therefore supports the general multiple-shape context, but not the claimed approach for this system. (LLM, conf=0.85)
- Not checked — no full text of the sourcecites [88] Samuel, 2014, Designing multiple-shape memory polymers with miscible polymer blends: Evidence and origins of a triple-shape memory effect for miscible PLLA/PMMA blends, Macromolecules source
- Not checked — no full text of the sourcecites [89] Wang, 2015, Biocompound-based multiple shape memory polymers reinforced by photo-cross-linking, ACS Biomater. Sci. Eng. source
- Not checked — no full text of the sourcecites [90] Zhang, 2016, Triple-shape memory effects of bismaleimide based thermosetting polymer networks prepared via heterogeneous crosslinking structures, RSC Adv. source
- Not checked — no full text of the sourcecites [91] Zheng, 2017, Catalyst-free thermoset polyurethane with permanent shape reconfigurability and highly tunable triple shape memory performance, ACS Macro Lett. source
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The sources with a verdict support this claim; the rest weren’t checked yet, have no full text we could read, or their verdicts aren’t rated yet.
In the paper
“The two-stage cross-linking method has been used to fabricate stress-free two-way SMPs, i.e., class (ii); e.g., in [136-138].”
What the sources say
- Not checked — no full text of the sourcecites [136] Wu, 2014, Two-way shape memory polymer with “switch–spring” composition by interpenetrating polymer network, J. Mater. Chem. source
- Supportedcites [137] Meng, 2015, Shape actuation via internal stress-induced crystallization of dual-cure networks, ACS Macro Lett. source
The synthesis passage describes two stages of cross-linking, and the actuator passage reports reversible elongation and contraction after removal of the applied load. Figure 1 calls the resulting devices “stressfree actuators”; here, stress-free means no external load, not an absence of internal stress. (LLM, conf=0.94)
- Not checked — no full text of the sourcecites [138] Fan, 2017, A facile approach toward scalable fabrication of reversible shape-memory polymers with bonded elastomer microphases as internal stress provider, Macromol. Rapid Commun. source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“This strategy has also allowed for the development of laminated polymers with double SMP layers exhibiting two-way SME also under stress-free condition [154-156].”
What the sources say
- Partly supportedcites [154] Kang, 2012, Two-way actuation behavior of shape memory polymer/elastomer core/shell composites, Smart Mater. Struct. sourceExperimental — accuracy not yet measured
The Conclusions report reversible two-way actuation in SMPU/SBS core/shell composites, and the schematic in §2.1 labels heating and cooling as occurring at zero external stress. But §2.2 describes one SMPU film coated with an SBS elastomer, not a laminate with double SMP layers. The Introduction’s laminate example likewise pairs an SMP film with an elastomeric film. (LLM, conf=0.88)
- Not checked — no full text of the sourcecites [155] Imai, 2013, An actuator of two-way behavior by using two kinds of shape memory polymers with different Tgs, Precis. Eng. source
- Partly supportedcites [156] Taya, 2013, Design of two-way reversible bending actuator based on a shape memory alloy/shape memory polymer composite, Smart Mater. Struct. sourceExperimental — accuracy not yet measured
Section 3 (page unavailable) models a three-layer laminate with two outer SMP layers, and the Conclusion (page unavailable) reports repeatable two-way bending. The active center layer contains SMA wires, however, so the paper does not establish two-way shape memory in a polymer-only laminate. The cited passages also do not establish the claimed stress-free condition. (LLM, conf=0.82)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
58 more claims · 12 with their cited sources checked
Create a free account to see all 150 claims and every source verdict.
- It may state two separate claims as one. 48
- Probably not a substantial claim. 48
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ 2.3. Two-Way SMPs
“such that Tm ,1 > Tm ,2 .”
§ 2.3. Two-Way SMPs
“(v) heating the material up to Tm ,2 > T 3 > Tm ,1 under stress-free conditions.”
Citations
Cites
Williams, M. L., Landel, R. F., & Ferry, J. D. (1955) · Journal of the American Chemical Society · doi:10.1021/ja01619a008 · Cited by 8,083
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027 · cited 2×
“, origami, kirigami) [22,23], bio-inspired and bio-mimetics architectures [19,24,25], reinforced systems [26], and granular jamming [27].”
BackgroundAnalysis of Bi-Metal Thermostats
Timoshenko, S. (1925) · Journal of the Optical Society of America · doi:10.1364/josa.11.000233 · Cited by 2,426
An integrated design and fabrication strategy for entirely soft, autonomous robots
Wehner, M., Truby, R. L., Fitzgerald, D. J., Mosadegh, B., Whitesides, G. M., Lewis, J. A., & Wood, R. J. (2016) · Nature · doi:10.1038/nature19100 · Cited by 2,127
Programmable and adaptive mechanics with liquid crystal polymer networks and elastomers
White, T. J., & Broer, D. J. (2015) · Nature Materials · doi:10.1038/nmat4433 · Cited by 1,744
Soft robotics: Technologies and systems pushing the boundaries of robot abilities
Laschi, C., Mazzolai, B., & Cianchetti, M. (2016) · Science Robotics · doi:10.1126/scirobotics.aah3690 · Cited by 1,570 · cited 1×
“In fact, robots based on soft materials (widely known as soft robots) are able to withstand large deformations, perform complex motions, conform to arbitrary geometries, and sustain impacts without damage, and thus they are particularly suited to those applications where a safe interaction with people, fragile objects…”
BackgroundShape-memory polymers and their composites: stimulus methods and applications
Leng, J., Lan, X., Liu, Y., & Du, S. (2011) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.03.001 · Cited by 1,495
Biomedical applications of soft robotics
Cianchetti, M., Laschi, C., Menciassi, A., & Dario, P. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0022-y · Cited by 1,435
Tunable polymer multi-shape memory effect
Xie, T. (2010) · Nature · doi:10.1038/nature08863 · Cited by 1,380
Soft Actuators for Small-Scale Robotics
Hines, L., Petersen, K., Lum, G. Z., & Sitti, M. (2017) · Advanced Materials · doi:10.1002/adma.201603483 · Cited by 1,337 · cited 6×
“Finally, it is worth mentioning that thermally-induced SMPs may be directly triggered by heating with hot gas or water, but indirect heating has been also used (see [3,33,46] and references therein).”
BackgroundInfluentialHu, J., Zhu, Y., Huang, H., & Lu, J. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.06.001 · Cited by 1,279 · cited 1×
“For a detailed review, the reader is referred to [36,259,260].”
BackgroundGuo, X., Zhang, W., & Zhong, W. (2014) · Journal of Applied Mechanics · doi:10.1115/1.4027609 · Cited by 1,243
4D Printing: Multi‐Material Shape Change
Tibbits, S. (2014) · Architectural Design · doi:10.1002/ad.1710 · Cited by 1,188
Liquid crystalline elastomers as actuators and sensors
Ohm, C., Brehmer, M., & Zentel, R. (2010) · Advanced Materials · doi:10.1002/adma.200904059 · Cited by 1,169
Momeni, F., M.Mehdi Hassani.N, S., Liu, X., & Ni, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.02.068 · Cited by 1,165
Multimaterial 4D Printing with Tailorable Shape Memory Polymers
Ge, Q., Sakhaei, A. H., Lee, H., Dunn, C. K., Fang, N. X., & Dunn, M. L. (2016) · Scientific Reports · doi:10.1038/srep31110 · Cited by 1,160
Voxelated liquid crystal elastomers
Ware, T. H., McConney, M. E., Wie, J. J., Tondiglia, V. P., & White, T. J. (2015) · Science · doi:10.1126/science.1261019 · Cited by 1,157
Advances in 4D Printing: Materials and Applications
Kuang, X., Roach, D. J., Wu, J., Hamel, C. M., Ding, Z., Wang, T., Dunn, M. L., & Qi, H. J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201805290 · Cited by 1,095
Shape memory polymers: Past, present and future developments
Hager, M. D., Bode, S., Weber, C., & Schubert, U. S. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2015.04.002 · Cited by 950
3D printing of smart materials: A review on recent progresses in 4D printing
Khoo, Z. X., Teoh, J. E. M., Liu, Y., Chua, C. K., Yang, S., An, J., Leong, K. F., & Yeong, W. Y. (2015) · Virtual and Physical Prototyping · doi:10.1080/17452759.2015.1097054 · Cited by 912
3D Printing of Shape Memory Polymers for Flexible Electronic Devices
Zarek, M., Layani, M., Cooperstein, I., Sachyani, E., Cohn, D., & Magdassi, S. (2016) · Advanced Materials · doi:10.1002/adma.201503132 · Cited by 903
Mouldable liquid-crystalline elastomer actuators with exchangeable covalent bonds
Pei, Z., Yang, Y., Chen, Q., Terentjev, E. M., Wei, Y., & Ji, Y. (2014) · Nature Materials · doi:10.1038/nmat3812 · Cited by 886
Active materials by four-dimension printing
Ge, Q., Qi, H. J., & Dunn, M. L. (2013) · Applied Physics Letters · doi:10.1063/1.4819837 · Cited by 785
3D printing of liquid crystal elastomeric actuators with spatially programed nematic order
Kotikian, A., Truby, R. L., Boley, J. W., White, T. J., & Lewis, J. A. (2018) · Advanced Materials · doi:10.1002/adma.201706164 · Cited by 768
Ge, Q., Dunn, C. K., Qi, H. J., & Dunn, M. L. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/9/094007 · Cited by 726
Reprogrammable recovery and actuation behaviour of shape-memory polymers
Lendlein, A., & Gould, O. E. C. (2019) · Nature Reviews Materials · doi:10.1038/s41578-018-0078-8 · Cited by 723 · cited 5×
“Then, a programming step, similar to those described for one-way and two-way SMPs, is applied and consists of: (i) heating the material up to a temperature T1 > Tm,1 > Tm,2; (ii) deforming the material with an external stress to induce a preorientation of the chain segments; (iii) cooling the material down to a temper…”
BackgroundMethodInfluentialFinkelmann, H., Kock, H., & Rehage, G. (1981) · Die Makromolekulare Chemie, Rapid Communications · doi:10.1002/marc.1981.030020413 · Cited by 701
Polyurethanes having shape memory effects
Kim, B. K., Lee, S. Y., & Xu, M. (1996) · Polymer · doi:10.1016/s0032-3861(96)00442-9 · Cited by 693 · cited 1×
“The shape memory cycle can be indefinitely repeated and is limited only by the possible degradation of the material [44,48].”
BackgroundDirect 4D Printing Via Active Composite Materials
Ding, Z., Yuan, C., Peng, X., Wang, T., Qi, H. J., & Dunn, M. L. (2017) · Science Advances · doi:10.1126/sciadv.1602890 · Cited by 692
Liquid crystal elastomers with mechanical properties of a muscle
Thomsen, D. L., Keller, P., Naciri, J., Pink, R., Jeon, H., Shenoy, D., & Ratna, B. R. (2001) · Macromolecules · doi:10.1021/ma001639q · Cited by 689
Programmable Mechanical Metamaterials
Florijn, B., Coulais, C., & van Hecke, M. (2014) · Physical Review Letters · doi:10.1103/physrevlett.113.175503 · Cited by 636 · cited 1×
“, auxetics) [21], folding/cutting theories (e.”
Kirigami skins make a simple soft actuator crawl
Rafsanjani, A., Zhang, Y., Liu, B., Rubinstein, S. M., & Bertoldi, K. (2018) · Science Robotics · doi:10.1126/scirobotics.aar7555 · Cited by 621
Water-driven programmable polyurethane shape memory polymer: Demonstration and mechanism
Huang, W. M., Yang, B., An, L., Li, C., & Chan, Y. S. (2005) · Applied Physics Letters · doi:10.1063/1.1880448 · Cited by 616
Active printed materials for complex self-evolving deformations
Raviv, D., Zhao, W., McKnelly, C., Papadopoulou, A., Kadambi, A., Shi, B., Hirsch, S., Dikovsky, D., Zyracki, M., Olguin, C., et al. (2014) · Scientific Reports · doi:10.1038/srep07422 · Cited by 568
Thermal and mechanical properties of plasticized poly(L‐lactic acid)
Baiardo, M., Frisoni, G., Scandola, M., Rimelen, M., Lips, D., Ruffieux, K., & Wintermantel, E. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12549 · Cited by 568
González-Henríquez, C. M., Sarabia-Vallejos, M. A., & Rodriguez-Hernandez, J. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.03.001 · Cited by 562
Soft Robotics in Minimally Invasive Surgery
Runciman, M., Darzi, A., & Mylonas, G. P. (2019) · Soft Robotics · doi:10.1089/soro.2018.0136 · Cited by 540
Two-Way Reversible Shape Memory in a Semicrystalline Network
Chung, T., Romo-Uribe, A., & Mather, P. T. (2008) · Macromolecules · doi:10.1021/ma071517z · Cited by 531 · cited 1×
“In fact, much attention has been devoted to the synthesis and thermo-mechanical characterization of semi-crystalline networks exhibiting the two-way SME under tensile stress [105,106,149,167].”
BackgroundSelf-folding of polymer sheets using local light absorption
Liu, Y., Boyles, J. K., Genzer, J., & Dickey, M. D. (2012) · Soft Matter · doi:10.1039/c1sm06564e · Cited by 523
3D printing of robotic soft actuators with programmable bioinspired architectures
Schaffner, M., Faber, J. A., Pianegonda, L., Rühs, P. A., Coulter, F., & Studart, A. R. (2018) · Nature Communications · doi:10.1038/s41467-018-03216-w · Cited by 518
Sequential Self-Folding Structures by 3D Printed Digital Shape Memory Polymers
Mao, Y., Yu, K., Isakov, M. S., Wu, J., Dunn, M. L., & Jerry Qi, H. (2015) · Scientific Reports · doi:10.1038/srep13616 · Cited by 510
Four-dimensional printing of liquid crystal elastomers
Ambulo, C. P., Burroughs, J. J., Boothby, J. M., Kim, H., Shankar, M. R., & Ware, T. H. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b11851 · Cited by 508
Jin, B., Song, H., Jiang, R., Song, J., Zhao, Q., & Xie, T. (2018) · Science Advances · doi:10.1126/sciadv.aao3865 · Cited by 497
Reversible bidirectional shape-memory polymers
Behl, M., Kratz, K., Zotzmann, J., Nöchel, U., & Lendlein, A. (2013) · Advanced Materials · doi:10.1002/adma.201300880 · Cited by 496
3D Printed Photoresponsive Devices Based on Shape Memory Composites
Yang, H., Leow, W. R., Wang, T., Wang, J., Yu, J., He, K., Qi, D., Wan, C., & Chen, X. (2017) · Advanced Materials · doi:10.1002/adma.201701627 · Cited by 483
Polymeric triple-shape materials
Bellin, I., Kelch, S., Langer, R., & Lendlein, A. (2006) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0608586103 · Cited by 481
Untethered soft robotic matter with passive control of shape morphing and propulsion
Kotikian, A., McMahan, C., Davidson, E. C., Muhammad, J. M., Weeks, R. D., Daraio, C., & Lewis, J. A. (2019) · Science Robotics · doi:10.1126/scirobotics.aax7044 · Cited by 476 · cited 2×
“[29] firstly created untethered, soft robots that can reversibly shape-morph and propel itself in response to temperature changes, via multi-material 3D printing.”
BackgroundHarnessing bistability for directional propulsion of soft, untethered robots
Chen, T., Bilal, O. R., Shea, K., & Daraio, C. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1800386115 · Cited by 427
Shape and temperature memory of nanocomposites with broadened glass transition
Miaudet, P., Derré, A., Maugey, M., Zakri, C., Piccione, P. M., Inoubli, R., & Poulin, P. (2007) · Science · doi:10.1126/science.1145593 · Cited by 416 · cited 1×
“Some approaches use SMP-based composites or fillers to tune polymer behavior [82,97].”
MethodYang, Y., Pei, Z., Li, Z., Wei, Y., & Ji, Y. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b12531 · Cited by 409
4D printing of polymeric materials for tissue and organ regeneration
Miao, S., Castro, N., Nowicki, M., Xia, L., Cui, H., Zhou, X., Zhu, W., Lee, S.-J., Sarkar, K., Vozzi, G., et al. (2017) · Materials Today · doi:10.1016/j.mattod.2017.06.005 · Cited by 408
Multi-shape active composites by 3D printing of digital shape memory polymers
Wu, J., Yuan, C., Ding, Z., Isakov, M., Mao, Y., Wang, T., Dunn, M. L., & Qi, H. J. (2016) · Scientific Reports · doi:10.1038/srep24224 · Cited by 399
Knitting and weaving artificial muscles
Maziz, A., Concas, A., Khaldi, A., Stålhand, J., Persson, N.-K., & Jager, E. W. H. (2017) · Science Advances · doi:10.1126/sciadv.1600327 · Cited by 397 · cited 1×
“, origami, kirigami) [22,23], bio-inspired and bio-mimetics architectures [19,24,25], reinforced systems [26], and granular jamming [27].”
BackgroundThermomechanical Constitutive Modeling in Shape Memory Polymer of Polyurethane Series
Tobushi, H., Hashimoto, T., Hayashi, S., & Yamada, E. (1997) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x9700800808 · Cited by 395
Thermomechanical constitutive model of shape memory polymer
Tobushi, H., Okumura, K., Hayashi, S., & Ito, N. (2001) · Mechanics of Materials · doi:10.1016/s0167-6636(01)00075-8 · Cited by 385
Molecularly-engineered, 4D-printed liquid crystal elastomer actuators
Saed, M. O., Ambulo, C. P., Kim, H., De, R., Raval, V., Searles, K., Siddiqui, D. A., Cue, J. M. O., Stefan, M. C., Shankar, M. R., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201806412 · Cited by 383
4D Printed Actuators with Soft-Robotic Functions
López‐Valdeolivas, M., Liu, D., Broer, D. J., & Sánchez‐Somolinos, C. (2018) · Macromolecular Rapid Communications · doi:10.1002/marc.201700710 · Cited by 371
4D Printing Technology: A Review
Choi, J., Kwon, O.-C., Jo, W., Lee, H. J., & Moon, M.-W. (2015) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2015.0039 · Cited by 365
Buguin, A., Li, M.-H., Silberzan, P., Ladoux, B., & Keller, P. (2006) · Journal of the American Chemical Society · doi:10.1021/ja0575070 · Cited by 361
Soft‐Matter Engineering for Soft Robotics
Majidi, C. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800477 · Cited by 358 · cited 1×
“Generally, such robots are constructed from materials as polymers, hydrogels, and elastomers [28].”
BackgroundTopology optimization based on moving deformable components: A new computational frameworkPreprint
Guo, X., Zhang, W., & Zhong, W. (2014) · arXiv (Cornell University) · doi:10.48550/arxiv.1404.4820 · Cited by 349
3D printed reversible shape changing components with stimuli responsive materials
Mao, Y., Ding, Z., Yuan, C., Ai, S., Isakov, M., Wu, J., Wang, T., Dunn, M. L., & Qi, H. J. (2016) · Scientific Reports · doi:10.1038/srep24761 · Cited by 348
Sequential self-folding of polymer sheets
Liu, Y., Shaw, B., Dickey, M. D., & Genzer, J. (2017) · Science Advances · doi:10.1126/sciadv.1602417 · Cited by 335
Lu, Y., Xiao, X., Fu, J., Huan, C., Qi, S., Zhan, Y., Zhu, Y., & Xu, G. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.08.189 · Cited by 334
Shape-memory polymers for multiple applications in the materials world
Pilate, F., Toncheva, A., Dubois, P., & Raquez, J.-M. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.05.004 · Cited by 332
Thermally-induced two-way shape memory polymers: Mechanisms, structures, and applications
Zare, M., Prabhakaran, M. P., Parvin, N., & Ramakrishna, S. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.05.167 · Cited by 330 · cited 2×
“Several studies have been dedicated to the characterization of two-way SMPs under tensile stress, while few studies are available on the compressive stress condition [47].”
BackgroundTwo-Way 4D Printing: A Review on the Reversibility of 3D-Printed Shape Memory Materials
Lee, A. Y., An, J., & Chua, C. K. (2017) · Engineering · doi:10.1016/j.eng.2017.05.014 · Cited by 326
Programming 2D/3D shape-shifting with hobbyist 3D printers
van Manen, T., Janbaz, S., & Zadpoor, A. A. (2017) · Materials Horizons · doi:10.1039/c7mh00269f · Cited by 321
Liquid crystal elastomers: an introduction and review of emerging technologies
Ula, S. W., Traugutt, N. A., Volpe, R. H., Patel, R. R., Yu, K., & Yakacki, C. M. (2018) · Liquid Crystals Reviews · doi:10.1080/21680396.2018.1530155 · Cited by 316
Evolution of 3D printed soft actuators
Zolfagharian, A., Kouzani, A. Z., Khoo, S. Y., Moghadam, A. A. A., Gibson, I., & Kaynak, A. (2016) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2016.09.028 · Cited by 314 · cited 2×
“While several examples, such as grippers and drug delivery systems, employ one-way SMPs (see [13,178,218,219] and references therein), applications based on the multiple-way SME are still limited.”
BackgroundMethodTemperature-memory polymer actuators
Behl, M., Kratz, K., Noechel, U., Sauter, T., & Lendlein, A. (2013) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1301895110 · Cited by 313
Adaptive metamaterials by functionally graded 4D printing
Bodaghi, M., Damanpack, A. R., & Liao, W. H. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.08.069 · Cited by 302
3D printed reversible shape changing soft actuators assisted by liquid crystal elastomers
Yuan, C., Roach, D. J., Dunn, C. K., Mu, Q., Kuang, X., Yakacki, C. M., Wang, T. J., Yu, K., & Qi, H. J. (2017) · Soft Matter · doi:10.1039/c7sm00759k · Cited by 300
Self-folding origami: shape memory composites activated by uniform heating
Tolley, M. T., Felton, S. M., Miyashita, S., Aukes, D., Rus, D., & Wood, R. J. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/9/094006 · Cited by 298
Amplifying the response of soft actuators by harnessing snap-through instabilities
Overvelde, J. T. B., Kloek, T., D’haen, J. J. A., & Bertoldi, K. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1504947112 · Cited by 283 · cited 1×
“, multi-stability, buckling) [17,18] or inhomogeneous deformations (e.”
Yang, H., Buguin, A., Taulemesse, J.-M., Kaneko, K., Méry, S., Bergeret, A., & Keller, P. (2009) · Journal of the American Chemical Society · doi:10.1021/ja905363f · Cited by 281
Triple‐Shape Polymeric Composites (TSPCs)
Luo, X., & Mather, P. T. (2010) · Advanced Functional Materials · doi:10.1002/adfm.201000052 · Cited by 276
4D Printing of Reversible Shape Morphing Hydrogel Structures
Naficy, S., Gately, R., Gorkin, R., Xin, H., & Spinks, G. M. (2017) · Macromolecular Materials and Engineering · doi:10.1002/mame.201600212 · Cited by 276
Zhang, Q., Zhang, K., & Hu, G. (2016) · Scientific Reports · doi:10.1038/srep22431 · Cited by 269
Various shape memory effects of stimuli-responsive shape memory polymers
Meng, H., Mohamadian, H., Stubblefield, M., Jerro, D., Ibekwe, S., Pang, S.-S., & Li, G. (2013) · Smart Materials and Structures · doi:10.1088/0964-1726/22/9/093001 · Cited by 257 · cited 5×
“In case of strategy (ii), the broad glass/melting transition may be considered a consecutive distribution of a certain number of glass/melting transitions, and the recovery process of the permanent shape from the different temporary shapes is triggered at various temperatures, corresponding to the temperatures at whic…”
BackgroundMethodInfluentialMechanisms of the multi-shape memory effect and temperature memory effect in shape memory polymers
Sun, L., & Huang, W. M. (2010) · Soft Matter · doi:10.1039/c0sm00236d · Cited by 257
Reduced time as a unified parameter determining fixity and free recovery of shape memory polymers
Yu, K., Ge, Q., & Qi, H. J. (2014) · Nature Communications · doi:10.1038/ncomms4066 · Cited by 256
Origami by Frontal Photopolymerization
Zhao, Z., Wu, J., Mu, X., Chen, H., Qi, H. J., & Fang, D. (2017) · Science Advances · doi:10.1126/sciadv.1602326 · Cited by 256
Revealing triple-shape memory effect by polymer bilayers
Xie, T., Xiao, X., & Cheng, Y. (2009) · Macromolecular Rapid Communications · doi:10.1002/marc.200900409 · Cited by 251 · cited 1×
“Alternative methods for creating multiple, well-separated switching transitions in one system consist of laminating two SMPs which have well-separated transition temperatures [76,77] or of developing hybrid SMPs with multiple thermal transitions [78–81].”
MethodAccordion‐like Actuators of Multiple 3D Patterned Liquid Crystal Polymer Films
de Haan, L. T., Gimenez‐Pinto, V., Konya, A., Nguyen, T., Verjans, J. M. N., Sánchez‐Somolinos, C., Selinger, J. V., Selinger, R. L. B., Broer, D. J., & Schenning, A. P. H. J. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201302568 · Cited by 240
Zheng, N., Hou, J., Xu, Y., Fang, Z., Zou, W., Zhao, Q., & Xie, T. (2017) · ACS Macro Letters · doi:10.1021/acsmacrolett.7b00037 · Cited by 237
Zotzmann, J., Behl, M., Hofmann, D., & Lendlein, A. (2010) · Advanced Materials · doi:10.1002/adma.200904202 · Cited by 233
Westbrook, K. K., Kao, P. H., Castro, F., Ding, Y., & Jerry Qi, H. (2011) · Mechanics of Materials · doi:10.1016/j.mechmat.2011.09.004 · Cited by 231
An Overview of Novel Actuators for Soft Robotics
Boyraz, P., Runge, G., & Raatz, A. (2018) · Actuators · doi:10.3390/act7030048 · Cited by 231
4D Printing Self-Morphing Structures
Bodaghi, M., Noroozi, R., Zolfagharian, A., Fotouhi, M., & Norouzi, S. (2019) · Materials · doi:10.3390/ma12081353 · Cited by 231
4D printed thermally activated self-healing and shape memory polycaprolactone-based polymers
Invernizzi, M., Turri, S., Levi, M., & Suriano, R. (2018) · European Polymer Journal · doi:10.1016/j.eurpolymj.2018.02.023 · Cited by 229
Closed-loop 4D-printed soft robots
Zolfagharian, A., Kaynak, A., & Kouzani, A. (2020) · Materials & Design · doi:10.1016/j.matdes.2019.108411 · Cited by 225
From 3D to 4D printing: Approaches and typical applications
Zhou, Y., Huang, W. M., Kang, S. F., Wu, X. L., Lu, H. B., Fu, J., & Cui, H. (2015) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-015-0925-0 · Cited by 224
Semi-crystalline two-way shape memory elastomer
Li, J., Rodgers, W. R., & Xie, T. (2011) · Polymer · doi:10.1016/j.polymer.2011.09.030 · Cited by 222
Yu, K., Ritchie, A., Mao, Y., Dunn, M. L., & Qi, H. J. (2015) · Procedia IUTAM · doi:10.1016/j.piutam.2014.12.021 · Cited by 220
Predicting thermal shape memory of crosslinked polymer networks from linear viscoelasticity
Diani, J., Gilormini, P., Frédy, C., & Rousseau, I. (2012) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2011.11.019 · Cited by 219
4D Printing: History and Recent Progress
Wu, J.-J., Huang, L.-M., Zhao, Q., & Xie, T. (2018) · Chinese Journal of Polymer Science · doi:10.1007/s10118-018-2089-8 · Cited by 219
Shapeshifting: Reversible shape memory in semicrystalline elastomers
Zhou, J., Turner, S. A., Brosnan, S. M., Li, Q., Carrillo, J.-M. Y., Nykypanchuk, D., Gang, O., Ashby, V. S., Dobrynin, A. V., & Sheiko, S. S. (2014) · Macromolecules · doi:10.1021/ma4023185 · Cited by 209
Li, S., Bai, H., Shepherd, R. F., & Zhao, H. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201813402 · Cited by 209 · cited 1×
“, origami, kirigami) [22,23], bio-inspired and bio-mimetics architectures [19,24,25], reinforced systems [26], and granular jamming [27].”
BackgroundMultiple and two-way reversible shape memory polymers: Design strategies and applications
Wang, K., Jia, Y.-G., Zhao, C., & Zhu, X. X. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100572 · Cited by 208 · cited 9×
“Recently, two-way SMPs containing dynamic covalent bonds have been prepared by using a method similar to the two-stage cross-linking method (see [46,141] and references therein).”
BackgroundMethodInfluentialMechanisms of multi-shape memory effects and associated energy release in shape memory polymers
Yu, K., Xie, T., Leng, J., Ding, Y., & Qi, H. J. (2012) · Soft Matter · doi:10.1039/c2sm25292a · Cited by 207
Configurational entropy approach to the kinetics of glasses
Di Marzio, E. A., & Yang, A. J. M. (1997) · Journal of Research of the National Institute of Standards and Technology · doi:10.6028/jres.102.011 · Cited by 201
Behl, M., & Lendlein, A. (2010) · Journal of Materials Chemistry · doi:10.1039/b922992b · Cited by 193
Triple-shape memory polymers based on self-complementary hydrogen bonding
Ware, T., Hearon, K., Lonnecker, A., Wooley, K. L., Maitland, D. J., & Voit, W. (2012) · Macromolecules · doi:10.1021/ma202098s · Cited by 192
Thermally Active Liquid Crystal Network Gripper Mimicking the Self‐Peeling of Gecko Toe Pads
Shahsavan, H., Salili, S. M., Jákli, A., & Zhao, B. (2017) · Advanced Materials · doi:10.1002/adma.201604021 · Cited by 189
A general approach towards thermoplastic multishape-memory polymers via sequence structure design
Luo, Y., Guo, Y., Gao, X., Li, B., & Xie, T. (2013) · Advanced Materials · doi:10.1002/adma.201202884 · Cited by 188
Pattern Transformation of Heat-Shrinkable Polymer by Three-Dimensional (3D) Printing Technique
Zhang, Q., Yan, D., Zhang, K., & Hu, G. (2015) · Scientific Reports · doi:10.1038/srep08936 · Cited by 188
Triple shape memory polymers by 4D printing
Bodaghi, M., Damanpack, A. R., & Liao, W. H. (2018) · Smart Materials and Structures · doi:10.1088/1361-665x/aabc2a · Cited by 187
Review of 4D printing materials and their properties
Shin, D.-G., Kim, T.-H., & Kim, D.-E. (2017) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-017-0040-z · Cited by 183
Recent developments in shape memory polymer nanocomposites: Actuation methods and mechanisms
Wang, W., Liu, Y., & Leng, J. (2016) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2016.03.007 · Cited by 182
Characterization Methods for Shape-Memory Polymers
Wagermaier, W., Kratz, K. L., Heuchel, M., & Lendlein, A. (2009) · Advances in polymer science · doi:10.1007/12_2009_25 · Cited by 182
Combined one-way and two-way shape memory in a glass-forming nematic network
Qin, H., & Mather, P. T. (2009) · Macromolecules · doi:10.1021/ma8022926 · Cited by 179
Wang, T., Ge, L., & Gu, G. (2018) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2018.01.018 · Cited by 177 · cited 1×
“Common actuation approaches to programmable soft robotics rely on pneumatic actuators [15,16], mechanisms promoting important structural changes (e.”
BackgroundSamuel, C., Barrau, S., Lefebvre, J.-M., Raquez, J.-M., & Dubois, P. (2014) · Macromolecules · doi:10.1021/ma500846x · Cited by 175
Technological considerations for 4D printing: An overview
Pei, E., & Loh, G. H. (2018) · Progress in Additive Manufacturing · doi:10.1007/s40964-018-0047-1 · Cited by 171
Strain-Based Temperature Memory Effect for Nafion and Its Molecular Origins
Xie, T., Page, K. A., & Eastman, S. A. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201002579 · Cited by 170
Polyurethane Shape Memory Polymers
Huang, W. M., Yang, B., & Fu, Y. Q. (2011) · CRC Press eBooks · doi:10.1201/b11209 · Cited by 160
Machine-learning based design of active composite structures for 4D printing
Hamel, C. M., Roach, D. J., Long, K. N., Demoly, F., Dunn, M. L., & Qi, H. J. (2019) · Smart Materials and Structures · doi:10.1088/1361-665x/ab1439 · Cited by 159
Two-way shape memory effect in polymer laminates
Chen, S., Hu, J., Zhuo, H., & Zhu, Y. (2008) · Materials Letters · doi:10.1016/j.matlet.2008.05.073 · Cited by 158
4D rods: 3D structures via programmable 1D composite rods
Ding, Z., Weeger, O., Qi, H. J., & Dunn, M. L. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.10.004 · Cited by 156
Liquid Crystal Elastomers: Materials and Applications
(2012) · Advances in Polymer Science · doi:10.1007/978-3-642-31582-4 · Cited by 155
Weiss, R. A., Izzo, E. L., & MANDELBAUM, S. (2008) · Macromolecules · doi:10.1021/ma8001774 · Cited by 153
Desolvation Induced Origami of Photocurable Polymers by Digit Light Processing
Zhao, Z., Wu, J., Mu, X., Chen, H., Qi, H. J., & Fang, D. (2017) · Macromolecular Rapid Communications · doi:10.1002/marc.201600625 · Cited by 153
Temperature‐Memory Polymer Networks with Crystallizable Controlling Units
Kratz, K., Madbouly, S. A., Wagermaier, W., & Lendlein, A. (2011) · Advanced Materials · doi:10.1002/adma.201102225 · Cited by 150
Zhao, J., Chen, M., Wang, X., Zhao, X., Wang, Z., Dang, Z.-M., Ma, L., Hu, G.-H., & Chen, F. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am400769j · Cited by 150
Two-way reversible shape memory effects in a free-standing polymer composite
Westbrook, K. K., Mather, P. T., Parakh, V., Dunn, M. L., Ge, Q., Lee, B. M., & Qi, H. J. (2011) · Smart Materials and Structures · doi:10.1088/0964-1726/20/6/065010 · Cited by 149
Shape-Memory Polymers and Multifunctional Composites
(2010) · CRC Press eBooks · doi:10.1201/9781420090208 · Cited by 145
Two-way shape memory polymer with “switch–spring” composition by interpenetrating polymer network
Wu, Y., Hu, J., Han, J., Zhu, Y., Huang, H., Li, J., & Tang, B. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta03640a · Cited by 144
Reversible shape-shifting in polymeric materials
Zhou, J., & Sheiko, S. S. (2016) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.24014 · Cited by 144 · cited 2×
“, class (ii), are shape-changing materials [30,118], that are often grouped into two-way SMPs since they may exhibit the two-way SME.”
BackgroundVerma, M. S., Ainla, A., Yang, D., Harburg, D. V., & Whitesides, G. M. (2017) · Soft Robotics · doi:10.1089/soro.2016.0078 · Cited by 144
Chen, T., Mueller, J., & Shea, K. (2017) · Scientific Reports · doi:10.1038/srep45671 · Cited by 137
Wang, M., Sayed, S. M., Guo, L.-X., Lin, B.-P., Zhang, X.-Q., Sun, Y., & Yang, H. (2016) · Macromolecules · doi:10.1021/acs.macromol.5b02388 · Cited by 135
Properties and mechanism of two-way shape memory polyurethane composites
Chen, S., Hu, J., & Zhuo, H. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2010.01.017 · Cited by 134
Shape actuation via internal stress-induced crystallization of dual-cure networks
Meng, Y., Jiang, J., & Anthamatten, M. (2015) · ACS Macro Letters · doi:10.1021/mz500773v · Cited by 134
Wang, K., Jia, Y.-G., & Zhu, X. X. (2017) · Macromolecules · doi:10.1021/acs.macromol.7b01815 · Cited by 134
Wen, Z., McBride, M. K., Zhang, X., Han, X., Martinez, A. M., Shao, R., Zhu, C., Visvanathan, R., Clark, N. A., Wang, Y., et al. (2018) · Macromolecules · doi:10.1021/acs.macromol.8b01315 · Cited by 134
Chain-Like Granular Jamming: A Novel Stiffness-Programmable Mechanism for Soft Robotics
Jiang, Y., Chen, D., Liu, C., & Li, J. (2018) · Soft Robotics · doi:10.1089/soro.2018.0005 · Cited by 134
Raquez, J., Vanderstappen, S., Meyer, F., Verge, P., Alexandre, M., Thomassin, J., Jérôme, C., & Dubois, P. (2011) · Chemistry – A European Journal · doi:10.1002/chem.201100496 · Cited by 133
4D printing shape memory polymers for dynamic jewellery and fashionwear
Zarek, M., Layani, M., Eliazar, S., Mansour, N., Cooperstein, I., Shukrun, E., Szlar, A., Cohn, D., & Magdassi, S. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1244085 · Cited by 133
Soft shape memory in main-chain liquid crystalline elastomers
Burke, K. A., & Mather, P. T. (2010) · Journal of Materials Chemistry · doi:10.1039/b924050k · Cited by 132
Buckley, C. P., Prisăcariu, C., & Caraculacu, A. A. (2007) · Polymer · doi:10.1016/j.polymer.2006.12.051 · Cited by 130
Adaptable liquid crystal elastomers with transesterification-based bond exchange reactions
Hanzon, D. W., Traugutt, N. A., McBride, M. K., Bowman, C. N., Yakacki, C. M., & Yu, K. (2018) · Soft Matter · doi:10.1039/c7sm02110k · Cited by 128
Dual-responsive, shape-switching bilayers enabled by liquid crystal elastomers
Boothby, J. M., & Ware, T. H. (2017) · Soft Matter · doi:10.1039/c7sm00541e · Cited by 127
Li, J., Liu, T., Xia, S., Pan, Y., Zheng, Z., Ding, X., & Peng, Y. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm12496j · Cited by 127 · cited 1×
“[102] incorporated another additional melting transition into a SMP already possessing a broad glass transition.”
BackgroundZotzmann, J., Behl, M., Feng, Y., & Lendlein, A. (2010) · Advanced Functional Materials · doi:10.1002/adfm.201000478 · Cited by 127 · cited 1×
“It is worth highlighting that multi-step programming is not a prerequisite for achieving the multiple-way SME and one-step programming has been also applied (see [38,73,74] and references therein).”
BackgroundShape Memory Behavior of a Polyethylene-Based Carboxylate Ionomer
Dolog, R., & Weiss, R. A. (2013) · Macromolecules · doi:10.1021/ma401631j · Cited by 127
Chen, S., Mo, F., Yang, Y., Stadler, F. J., Chen, S., Yang, H., & Ge, Z. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06304j · Cited by 126
A Soft Pneumatic Inchworm Double balloon (SPID) for colonoscopy
Manfredi, L., Capoccia, E., Ciuti, G., & Cuschieri, A. (2019) · Scientific Reports · doi:10.1038/s41598-019-47320-3 · Cited by 124
Pandini, S., Baldi, F., Paderni, K., Messori, M., Toselli, M., Pilati, F., Gianoncelli, A., Brisotto, M., Bontempi, E., & Riccò, T. (2013) · Polymer · doi:10.1016/j.polymer.2013.06.016 · Cited by 122 · cited 3×
“In fact, much attention has been devoted to the synthesis and thermo-mechanical characterization of semi-crystalline networks exhibiting the two-way SME under tensile stress [105,106,149,167].”
BackgroundUltra-programmable buckling-driven soft cellular mechanisms
Janbaz, S., Bobbert, F. S. L., Mirzaali, M. J., & ZADPOOR, A. A. (2019) · Materials Horizons · doi:10.1039/c9mh00125e · Cited by 122 · cited 1×
“, multi-stability, buckling) [17,18] or inhomogeneous deformations (e.”
Programmable Deployment of Tensegrity Structures by Stimulus-Responsive Polymers
Liu, K., Wu, J., Paulino, G. H., & Qi, H. J. (2017) · Scientific Reports · doi:10.1038/s41598-017-03412-6 · Cited by 119
Hu, G. F., Damanpack, A. R., Bodaghi, M., & Liao, W. H. (2017) · Smart Materials and Structures · doi:10.1088/1361-665x/aa95ec · Cited by 119
(2010) · Advances in Polymer Science · doi:10.1007/978-3-642-12359-7 · Cited by 117
Westbrook, K. K., Parakh, V., Chung, T., Mather, P. T., Wan, L. C., Dunn, M. L., & Qi, H. J. (2010) · Journal of Engineering Materials and Technology · doi:10.1115/1.4001964 · Cited by 115 · cited 3×
“In fact, few works considering the two-way SME under stress conditions in semi-crystalline crosslinked polymers are available [103,104,167,277,278].”
BackgroundA tough shape memory polymer with triple shape memory and two-way shape memory properties
Bai, Y., Zhang, X., Wang, Q., & Wang, T. (2014) · Journal of Materials Chemistry A · doi:10.1039/c3ta15117d · Cited by 115
Mechanical Models, Structures, and Applications of Shape-Memory Polymers and Their Composites
Xin, X., Liu, L., Liu, Y., & Leng, J. (2019) · Acta Mechanica Solida Sinica · doi:10.1007/s10338-019-00103-9 · Cited by 115
Bidirectional actuation of a thermoplastic polyurethane elastomer
Bothe, M., & Pretsch, T. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta13414h · Cited by 112
Photocrosslinkable liquid crystal main-chain polymers: Thin films and electrospinning
Krause, S., Dersch, R., Wendorff, J. H., & Finkelmann, H. (2007) · Macromolecular Rapid Communications · doi:10.1002/marc.200700460 · Cited by 108
Design of Triple-Shape Memory Polyurethane with Photo-cross-linking of Cinnamon Groups
Wang, L., Yang, X., Chen, H., Gong, T., Li, W., Yang, G., & Zhou, S. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am402091m · Cited by 108
Triple-shape properties of a thermoresponsive poly(ester urethane)
Pretsch, T. (2010) · Smart Materials and Structures · doi:10.1088/0964-1726/19/1/015006 · Cited by 105
A functionally graded shape memory polymer
DiOrio, A. M., Luo, X., Lee, K. M., & Mather, P. T. (2011) · Soft Matter · doi:10.1039/c0sm00487a · Cited by 105 · cited 1×
“[98] created a linear glass transition temperature gradient within one SMP leading to a glass transition distribution throughout the polymer and a recovery in the linear gradient direction.”
BackgroundModeling of Shape Memory Induction and Recovery in Heat‐Shrinkable Polymers
Morshedian, J., Khonakdar, H. A., & Rasouli, S. (2005) · Macromolecular Theory and Simulations · doi:10.1002/mats.200400108 · Cited by 104
Recent advances in degradable lactide-based shape-memory polymers
Balk, M., Behl, M., Wischke, C., Zotzmann, J., & Lendlein, A. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.05.012 · Cited by 103
Lu, L., & Li, G. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b04105 · Cited by 102
Level Set Topology Optimization of Printed Active Composites
Maute, K., Tkachuk, A., Wu, J., Jerry Qi, H., Ding, Z., & Dunn, M. L. (2015) · Journal of Mechanical Design · doi:10.1115/1.4030994 · Cited by 101
Ahn, S., Deshmukh, P. H., & Kasi, R. M. (2010) · Macromolecules · doi:10.1021/ma101145r · Cited by 101
(2015) · AccessScience · doi:10.1036/1097-8542.yb080140 · Cited by 100
Polyolefin thermoplastics for multiple shape and reversible shape memory
Gao, Y., Liu, W., & Zhu, S. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b14728 · Cited by 99
Ahn, S., & Kasi, R. M. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201101369 · Cited by 97
Peng, Q., Wei, H., Qin, Y., Lin, Z., Zhao, X., Xu, F., Leng, J., He, X., Cao, A., & Li, Y. (2016) · Nanoscale · doi:10.1039/c6nr06515e · Cited by 97
Topology optimization for the design of folding liquid crystal elastomer actuators
Fuchi, K., Ware, T. H., Buskohl, P. R., Reich, G. W., Vaia, R. A., White, T. J., & Joo, J. J. (2015) · Soft Matter · doi:10.1039/c5sm01671a · Cited by 97
Advances in biomimetic stimuli responsive soft grippers
Yoon, C. (2019) · Nano Convergence · doi:10.1186/s40580-019-0191-4 · Cited by 96
Gao, Y., Liu, W., & Zhu, S. (2018) · Macromolecules · doi:10.1021/acs.macromol.8b01724 · Cited by 94
Chatani, S., Wang, C., Podgórski, M., & Bowman, C. N. (2014) · Macromolecules · doi:10.1021/ma501028a · Cited by 93
Two‐Way Shape Changes of a Shape‐Memory Poly(ester urethane)
Bothe, M., & Pretsch, T. (2012) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201200096 · Cited by 92
Baker, R. M., Henderson, J. H., & Mather, P. T. (2013) · Journal of Materials Chemistry B · doi:10.1039/c3tb20810a · Cited by 92
Thermomechanically Triggered Two‐Stage Pattern Switching of 2D Lattices for Adaptive Structures
Yuan, C., Mu, X., Dunn, C. K., Haidar, J., Wang, T., & Qi, H. J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705727 · Cited by 92
Kwok, T.-H., Wang, C. C. L., Deng, D., Zhang, Y., & Chen, Y. (2015) · Journal of Mechanical Design · doi:10.1115/1.4031023 · Cited by 91
Organic–inorganic nanocomposite bilayers with triple shape memory effect
Bae, C. Y., Park, J. H., Kim, E. Y., Kang, Y. S., & Kim, B. K. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm10722d · Cited by 88 · cited 1×
“Alternative methods for creating multiple, well-separated switching transitions in one system consist of laminating two SMPs which have well-separated transition temperatures [76,77] or of developing hybrid SMPs with multiple thermal transitions [78–81].”
MethodFrom 3D to 4D printing—Design, material and fabrication for multi-functional multi-materials
Khare, V., Sonkaria, S., Lee, G.-Y., Ahn, S.-H., & Chu, W.-S. (2017) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-017-0035-9 · Cited by 88
Deng, X.-Y., Xie, H., Du, L., Fan, C.-J., Cheng, C.-Y., Yang, K.-K., & Wang, Y.-Z. (2019) · Science China Materials · doi:10.1007/s40843-018-9318-7 · Cited by 87
Triple Shape Memory Effect of Star-Shaped Polyurethane
Yang, X., Wang, L., Wang, W., Chen, H., Yang, G., & Zhou, S. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am5001344 · Cited by 86
Ghosh, P., Rao, A., & Srinivasa, A. R. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2012.05.063 · Cited by 86
Modeling Shape-Memory Behavior of Polymers
Nguyen, T. D. (2013) · Polymer Reviews · doi:10.1080/15583724.2012.751922 · Cited by 85
Viscoelasticity of the polydomain-monodomain transition in main-chain liquid crystal elastomers
Azoug, A., Vasconcellos, V., Dooling, J., Saed, M., Yakacki, C. M., & Nguyen, T. D. (2016) · Polymer · doi:10.1016/j.polymer.2016.06.022 · Cited by 85
Thermally activated reversible shape switch of polymer particles
Gong, T., Zhao, K., Wang, W., Chen, H., Wang, L., & Zhou, S. (2014) · J. Mater. Chem. B · doi:10.1039/c4tb01155d · Cited by 83
Saatchi, M., Behl, M., Nöchel, U., & Lendlein, A. (2015) · Macromolecular Rapid Communications · doi:10.1002/marc.201400729 · Cited by 81
4D printing of polyurethane paint-based composites
Su, J.-W., Gao, W., Trinh, K., Kenderes, S. M., Tekin Pulatsu, E., Zhang, C., Whittington, A., Lin, M., & Lin, J. (2019) · International Journal of Smart and Nano Materials · doi:10.1080/19475411.2019.1618409 · Cited by 81
Multishape memory effect of norbornene-based copolymers with cholic acid pendant groups
Shao, Y., Lavigueur, C., & Zhu, X. X. (2012) · Macromolecules · doi:10.1021/ma202506b · Cited by 80
Lei, M., Yu, K., Lu, H., & Qi, H. J. (2016) · Polymer · doi:10.1016/j.polymer.2016.12.047 · Cited by 80
Tibbits, S. (2012) · Architectural Design · doi:10.1002/ad.1381 · Cited by 80
3D printing of tunable shape memory polymer blends
Chen, S., Zhang, Q., & Feng, J. (2017) · Journal of Materials Chemistry C · doi:10.1039/c7tc02534c · Cited by 80
Reversible Bidirectional Shape Memory Effect in Polyurethanes through Molecular Flipping
Biswas, A., Aswal, V. K., Sastry, P. U., Rana, D., & Maiti, P. (2016) · Macromolecules · doi:10.1021/acs.macromol.6b00536 · Cited by 78
Carrico, J. D., Tyler, T., & Leang, K. K. (2017) · International Journal of Smart and Nano Materials · doi:10.1080/19475411.2018.1438534 · Cited by 78 · cited 7×
“Finally, it is worth mentioning that thermally-induced SMPs may be directly triggered by heating with hot gas or water, but indirect heating has been also used (see [3,33,46] and references therein).”
BackgroundInfluentialApplications of Shape Memory Polymers in Kinetic Buildings
Li, J., Duan, Q., Zhang, E., & Wang, J. (2018) · Advances in Materials Science and Engineering · doi:10.1155/2018/7453698 · Cited by 77
Digital manufacture of shape changing components
Yu, K., Dunn, M. L., & Qi, H. J. (2015) · Extreme Mechanics Letters · doi:10.1016/j.eml.2015.07.005 · Cited by 76
Cuevas, J. M., Rubio, R., Germán, L., Laza, J. M., Vilas, J. L., Rodriguez, M., & León, L. M. (2012) · Soft Matter · doi:10.1039/c2sm07481h · Cited by 75
Ahn, S.-K., Deshmukh, P., Gopinadhan, M., Osuji, C. O., & Kasi, R. M. (2011) · ACS Nano · doi:10.1021/nn200211c · Cited by 74
Artificial muscles made of chiral two-way shape memory polymer fibers
Yang, Q., Fan, J., & Li, G. (2016) · Applied Physics Letters · doi:10.1063/1.4966231 · Cited by 74
Wang, Z., Zhao, J., Chen, M., Yang, M., Tang, L., Dang, Z.-M., Chen, F., Huang, M., & Dong, X. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am5056307 · Cited by 73
Research works printed but not linked: 2
- Ueda, J., and Kurita, Y. (2017). Chapter Six - Soft Wearable Robotics Technologies for Body Motion Sensing. Human Modelling for Bio-Inspired Robotics, Academic Press.
- Hayashi, 1993, Properties and Applications of Polyurethane-series Shape Memory Polymer, Int. Prog. Urethanes, 6, 90
Cited by
Micro/nano functional devices fabricated by additive manufacturing
Huang, Z., Shao, G., & Li, L. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101020 · Cited by 224
3D printing of magneto-active smart materials for advanced actuators and soft robotics applications
Khalid, M. Y., Arif, Z. U., Tariq, A., Hossain, M., Ahmed Khan, K., & Umer, R. (2024) · European Polymer Journal · doi:10.1016/j.eurpolymj.2023.112718 · Cited by 190
Auxetic mechanical metamaterials and their futuristic developments: A state-of-art review
Balan P, M., Mertens A, J., & Bahubalendruni, M. V. A. R. (2023) · Materials Today Communications · doi:10.1016/j.mtcomm.2022.105285 · Cited by 165
4D printing: Technological developments in robotics applications
Khalid, M. Y., Arif, Z. U., Ahmed, W., Umer, R., Zolfagharian, A., & Bodaghi, M. (2022) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2022.113670 · Cited by 160
Recent Advances in the Additive Manufacturing of Stimuli‐Responsive Soft Polymers
Tariq, A., Arif, Z. U., Khalid, M. Y., Hossain, M., Rasool, P. I., Umer, R., & Ramakrishna, S. (2023) · Advanced Engineering Materials · doi:10.1002/adem.202301074 · Cited by 156
Metadata
- Authors
- Scalet, G.
- Affiliations
- University of Pavia (IT)
- Corresponding author
- Scalet, Giulia
- ORCID
- Scalet, Giulia
- Venue
- Actuators
- Publisher
- MDPI AG
- Published
- 2020-02-15
- Volume
- 9
- Issue
- 1
- Pages
- 10
- ISSN
- 2076-0825 (ISSN-L)
- OpenAlex
- W3006401357
- Cited by
- 209
- References
- 312
- Citations by year
- 2026: 22 · 2025: 35 · 2024: 53 · 2023: 33 · 2022: 37 · 2021: 23 · 2020: 6
- FWCI
- 12.18
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Actuators (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
- Physical Sciences › Engineering › Biomedical Engineering › Soft Robotics and Applications
- Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Dielectric materials and actuators
- Keywords
- shape memory polymers, soft robotics, temperature-responsive materials, untethered soft robots, soft actuators, smart materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-08, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-08 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.